Job Description

• Co-ordination and supervision of M&E works
• Liaise with M&E Consultants
• Ascertain and make provision for all M&E and building services in collaboration with the project staff
• Monitor progress, quality of workmanship and compliance with authority requirements.
• Highlight and advise the project staff on the interfacing of M&E services and the building works
• Coordination with multiple parties not limiting to design consultants / engineers, clients’ project representatives, statutory / authority agencies etc. for the establishment of the design deliverables requirements for submission
• Review design deliverables together with the design consultants / engineers and ensure that it is in order for submission
• Attend to technical clarifications as and when required to address technical issues and establish method statements
• Project Management and sites supervision works.
• Able to coordinate with contractors and consultants for engineering issues and drawing plans.
• Perform all duties in accordance with company policies, processes, systems and procedures.

Job Requirements:

Minimum six (6) years of engineering experience with Degree in Civil Engineering recognised by the PE Board or qualification acceptable to the Commissioner of Building Control and eligible for application as a Resident Engineer or Recognised Degree in the relevant field subject to the acceptance of the Engineer, and at least five (5) years of experience in the construction supervision for building projects with basement structures.

Responsibilities

• To work as Process Lead for Oil & Gas Projects and guide a team of 10 to 15 Process
• Engineers to finish the Process design (start from Basic design to Detail Design) of the project.
• Guide Engineers and Designers to execute the Process Engineering of the Project which
• includes PFD, P&ID, MSD, PSD, HAZOP, Pump Head Calculation, Line sizing calculation,
• Heat & Material Balance, SIL Study, Process Line List, Surge Analysis, Process data
• sheets for Equipment’s and Instruments, Heat Transfer Calculation, Instrument Sizing calculation, Process design calculation and reports, vendor document review, MAHM
• Reports, HAZID, ALARP, Performance Standards
• Attend meeting and co-ordinate with client and other discipline and vendors for regular update of the project and clarifications
• Work closely with project Team and BDD for Tender works in preparing technical proposal for submission to client and to lead the technical discussion with client for Tender clarification
• Implement HSE objectives, policy and company HSE procedures within his authority limit.
• To integrate Risk-based thinking and HSE considerations into business decisions, plans and operations with the commitment to eliminate and reduce HSE hazards, aspects, and risks.
• To be proactive in creating a safe working environment for everyone and ensuring that
• HSE in-house rules are observed at all times.
• To consider HSE aspects when planning and carrying out tasks to eliminate and reduce
• HSE hazards, aspects and risks.
• Any other ad hoc tasks.

Requirements

• Preferably Bachelor’s Degree in Chemical Engineering / Mechanical Engineering

• Preferably to 15 years in Oil & Gas industry

Software Requirements

• Pipe Net

• Good proficiency in MS Excel, MS word

• Smart Plant P&ID

Code Knowledge

• API 2000, API 520, API 521, API 526, API 2350

• SS 532

• NFPA 11, NFPA 13, NFPA 15, NFPA 20, NFPA 30

• Collaborate with engineers, architects etc. to determine the specifications of the project
• Negotiate contracts with external vendors to reach profitable agreements
• Obtain permits and licenses from appropriate authorities
• Determine needed resources (manpower, equipment and materials) from start to finish with attention to budgetary limitations
• Plan all construction operations and schedule intermediate phases to ensure deadlines will be met
• Acquire equipment and material and monitor stocks to timely handle inadequacies
• Hire contractors and other staff and allocate responsibilities
• Supervise the work of laborers, mechanics etc. and give them guidance when needed
• Evaluate progress and prepare detailed reports
• Ensure adherence to all health and safety standards and report issues

Job Description

Responsibilities

· Reporting to the Project Director/ Business Unit Head.

· Responsible for preparing project start-up and execution plan, as well as to define key project targets in terms of time, cost, quality, resources, EHS and contractual.

· Liaise effectively with client’s representatives and consultants in all project matters relating to authority, planning, contracts, construction and EHS, including reporting at regular meetings.

· Lead a team of professional and technical staff in planning and execution of day-to-day operations to achieve all key project targets

· Review master programme, define key project milestones and set pull-planning targets for project team to manage site progress and activities effectively.

· Liaise with and manage Subcontractors to deliver their respective performance targets in terms of time, cost, quality and safety.

· Implement and control project budgetary plans, as well as to manage contractual matters fully.

· Drive the implementation of innovative construction methodologies and practices on site to improve productivity and achieve lean outcome.

· Foster collaborative spirit between project team members, as well as commitment to achieving performance targets set.

· Assist the Business Unit Head or Project Director in tendering proposals to secure new projects.

Requirements:

· Degree in Building/ Civil or Electrical Engineering/ Construction Management or related.

· Minimum 8 years’ experience in project management and/ or site coordination works for building projects.

. BCCPE certificate would be an advance.

· Good all-rounded knowledge in construction management, planning capability and contractual matters; adopt lean mind set to cost and resource management.

· Able to effectively collaborate with all stakeholders to achieve good results in project delivery; strongly committed to accomplishing the established milestones and other deliverables.

· Proactive when solving issues and focused on strategic goals of the project.

· Proponent of lean principles, actively seeking to maximize value and minimize waste in processes and resource management; Believer of empirical data and measurement as basis of decision-making to improve efficiency and productivity.

· Applicants with prior relevant experience in residential projects will be preferred.

·Duties & Responsibilities

· Operate machinery to produce the products while adhering to safety guidelines and quality standards.

· Inspect finished products to ensure they meet quality standards, making adjustments or reporting issues as needed.

· Perform routine maintenance tasks on machines, such as cleaning, lubricating, and replacing worn parts, to prevent breakdowns and ensure optimal performance.

· Adhere to all safety procedures and guidelines, including wearing appropriate personal protective equipment (PPE), to maintain a safe working environment.

· Collaborate with other team members, such as supervisors, quality control personnel, and maintenance technicians, to optimize production processes.

· Identify and troubleshoot machine issues promptly to minimize downtime and maintain production schedules.

· Maintain accurate records of machine operations, production output, and any maintenance or adjustments made during the shift.

Requirements

No experiene candidates are welcome to apply as training will be provided.

Able to commit OT as and when required.

Able to start immediately or with short notice.

Phyiscally fit and committed to the job

Job Description & Requirements

• Monitoring and verifying that the Environmental Management Plan (EMP) is adhered to at all times and taking action if the specifications are not followed.
• Monitoring and verifying that environmental impacts are kept to a minimum during the planning and design and construction phases of the project.
• Assisting the project proponent in ensuring that all environmental authorisations have been obtained.
• Reviewing and approving environmental objectives and targets and assisting the Contractor in finding environmentally responsible solutions to problems.
• Conducting, surveillance, monthly inspections and detailed audits.
• Compiling and completing checklists in order to aid the surveillance and inspection requirements.
• Keeping records of all activities/incidents concerning the environment on site and issuing of spot fines for transgression of activities identified in the EMP.
• Recommending the issuing of penalties to the Engineers Representative for contravention of the EMP.
• Keeping a register of complaints on site and recording community comments and issues.
• Perform all duties in accordance with CCCC policies, processes, systems and procedures.

Job Requirement:

Registered with National Environment Agency (NEA) and have at least three (3) years of post-registration and practical experience relevant to the scope of works of the contract. Local candidates with LTA experiences will be advantage.

Job Responsibilities

• Leading a Team of Mechanical Design Engineers to execute the Mechanical Design Engineering of the Project which includes preparation of RFQ, Specifications, Mechanical Data Sheet for
• Centrifugal Pumps, PD Pumps, Submersible pumps, Marine Loading Arm, Oil / Water Separator,
• Gangway, Jib Crane, Fire Fighting Equipment, Mixers, Gas Dehydration Package, Air
• Compressor and Dryer Package, Nitrogen Generation Package, Chemical Injection Package,
• Process Filters, Vessels etc. meeting Process Requirement, Client Specifications, Project
• Requirements and all applicable Project Documents to enable Vendors to accurately bid for the supply of Equipment.
• Review & Checking of Mechanical Documents such as RFQ, Specifications, Mechanical DataSheet and Technical Bid Evaluation for Mechanical Equipment to ensure compliance to applicable Codes & Standards and Project Requirements
• Review of Vendor Quotation, Evaluation & Preparation of Technical Bid Evaluation for
• Mechanical Equipment
• Interface Management with Lead Engineers, Client, Contractors, Vendors, Government Agencies and Certification agencies
• Preparation, Monitoring and Control Engineering Document Control List and expedite for delay/approvals / resolution of open issues
• Review and Ensures that all works are carried out in accordance with project specification.
• Maintain Design integrity and quality within the Project Engineering Team
• Preparing Engineering schedule and Engineering man hours estimation to meet project requirements.
• Supporting Procurement Team for purchase of Mechanical Equipment
• Review of Vendor Documents post order of all the Mechanical Equipment to ensure compliance to RFQ and other Discipline requirements.
• Co-ordination with construction and commissioning team in resolving site issues.
• Vendor Co-ordination & Procurement Assistance
• Preparation and Compliance for Engineering Audit Requirements.
• Job assignments, Mentoring and Supervision of works for Designers and Design Engineers.
• Technical assistance to construction activities and attending to Site Queries.
• Participates in discipline and inter-discipline design check and screening meetings for
• compatibility, completeness and correctness in works
• FEED & Pre-Bid works which involves Feasibility study & MTO estimation works.
• Participate in Bid Clarification Meeting, Kick Off Meeting, Pre-inspection Meeting, Factory Acceptance Test, Site Acceptance Test etc.
• Vendor Shop visit for Work Progress
• Support Construction Team and Commissioning Team for the successful installation and commissioning of the Mechanical Equipment
• To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.
• To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects and risks.
• Any other ad hoc tasks

Requirements

• Preferably Bachelor’s / Master’s Degree in Mechanical Engineering
• Preferably 10 - 15 years of experiences in Oil and Gas industry Software Requirements
• Good proficiency in MS Excel, MS word, MS Power Point

Code Knowledge

• API 610, API 676, API 682
• ASME Section VIII
• NFPA 20, NFPA 10, NFPA 16
• OCIMF

Responsibilities:

- Coordinate handover and takeover schedules for the Tenant.

- Ensure smooth transitions between tenants by arranging efficient schedules.

- Keep detailed records of handover and take over schedules.

Requirements:

- Strong organizational skills to manage handover schedules effectively.

- Excellent coordination abilities to ensure seamless transitions.

- Attention to detail in arranging and overseeing cleaning services.

- Communication skills to liaise with tenants, handover team, and other departments.

- Ability to work efficiently in a dynamic property management environment.

1. Design and Drafting:

- Use computer-aided design (CAD) software to create detailed engineering drawings and plans.

- Assist in the design process for various projects, such as buildings, machinery, or electronic systems.

2. Testing and Quality Control:

- Conduct experiments and tests to evaluate the performance and reliability of products or systems.

- Implement quality control procedures to ensure that products meet industry standards and specifications.

3. Technical Support:

- Provide technical support to engineers or other team members in the development and implementation of projects.

- Troubleshoot and solve technical problems that may arise during the design or manufacturing process.

4. Maintenance and Repair:

- Perform routine maintenance and repair of equipment or systems to ensure proper functionality.

- Diagnose and address issues with machinery or electronic systems.

5. Project Management:

- Assist in project management tasks, such as budgeting, scheduling, and coordinating activities to ensure project goals are met.

- Collaborate with cross-functional teams to achieve project objectives.

6. Installation and Commissioning:

- Participate in the installation and commissioning of new equipment or systems.

- Ensure that installations meet safety and performance standards.

7. Documentation:

- Prepare technical documentation, including manuals, reports, and specifications.

- Maintain accurate records of engineering activities and project progress.

8. Research and Development:

- Contribute to research and development efforts by staying updated on industry trends and incorporating new technologies into

Duties & Responsibilities:

1. The Construction Manager shall play a key role in the conceptual development of the various construction projects and oversee its organization, scheduling, and implementation
2. He/She will be required to plan, lead and monitor progress and performance against the project plan whilst managing the day-to-day operational aspects of projects which includes manpower planning, construction progress monitoring, preparation of master schedule and cost control
3. Responsible for cost management to manage projects within approved budgets, include materials, manpower and machinery cost control for new and running projects
4. Responsible for exercising timely instructions to deal with the results of delays, or emergencies at construction project sites
5. Reviewing manpower planning and monitoring of work schedules to ensure orderly delegation of jobs and smooth operation. Ensure to exercise effectively safe and economical methodology and enforces project standards
6. To maintain close collaboration with Project Managers, Architects, Engineers and all stakeholders to minimise errors in the process to achieve smooth completion of projects
7. To liaise closely with clients, consultants, sub-contractors, relevant authorities and developers in resolving site issues and authorities compliance issues

Requirements:

1. 10 years relevant working experience within the Construction industry
2. Should possess a minimum qualification of Degree in Engineering or Architecture or equivalent qualification
3. Ability to prioritize tasks well and able to work independently
4. Able to work under stress and complete tasks within set deadlines

Job Responsibilities

• Provide administrative support to the construction site office
• Coordinate and assist in the day to day general administration
• Keep proper documentation & filing system
• Process billing and generating reports
• Any ad hoc duties assigned

Job Requirements

• GCE 'N’ levels and above
• At least 2 years working experience preferred
• Able to work independently at site location
• Good interpersonal and communication skills
• Proficient in Microsoft Office Applications (Outlook, Word, Excel)

Be a part of our diverse family at Hai Leck, embracing each other as you discover your unique career potential and find your perfect fit with us. We are committed to unlocking your potential and guiding you to success. Our employees are valued down to their skills, and we are committed to training them and expanding their knowledge.

We would be pleased to welcome you at our family in Hai Leck if you are a suitable member.

Email us at [email protected] now!

• Coordinate and supervision of structural technical aspects of construction Supervise site building works
• Liaise with Consultants, Sub-contractors
• Handle any other ad-hoc duties and tasks assigned
• At least 5 years experience in Construction
• Know rebar and timberform work and can read drawing

Job Description:

• Request quotation and price negotiation with suppliers.
• Prepare purchase order, ensure timely delivery and follow through the complete procurement cycle.
• Responsible for construction material / machinery purchase and to maintain with proper record for receipts and issuance.
• Matching of supplier’s invoices with supporting documents such as PR, PO & DO.
• Maintain up to date prices from suppliers.

Job Requirement:

• Minimum GCE 'O' Level.
• At least 2 years of relevant working experience
• Preferably experience in Construction Industry

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Responsibilities:

• Assist in recruitment process such as job posting, short listing and scheduling of suitable candidates for interview.
• Onboarding and Offboarding for Employee.
• Coordinate and administer training & development programs including submitting of claims/training grants to various government agencies.
• Document control representative for ISO.
• Payroll function.
• Work Pass Application, Renewal and Cancellation.
• Handles matters related to general worker such as dormitory arrangement, update residential address via MOM OFWAS system, CSOC, Coretrade, levy waiver, medical checkup for new hire and monthly renewal workers.
• Matters related to MYE application.
• Conduct and complete market surveys from MOM, IRAS, CPF, WDA and various HR related surveys.
• Other ad-hoc duties as assigned by the Management.

Job Description:

• Ensure the quality of all construction work performed on site are in accordance with the company's QAQC requirement.
• Visit project sites, arrange and conduct QAQC inspections on mainly Structural Works and Architectural Works.
• Assist project teams in the preparation of project specific CONQUAS/Quality Management assessment by BCA with specific contract requirements.
• Ensure workmanship, procedures and method statements are in accordance to specified standards.
• Conduct regular inspections to ensure works are in compliance with method statements & proper sequence of work and in accordance to BCA’s good industry practice.
• Ensure that all project quality records and quality audit plans are maintained.
• Any other duties as assigned.

Job Requirement:

• Candidate must possess Bachelor Degree in relevant discipline.
• Minimum 5 years of experience in procurement preferably construction/ civil engineering industry.
• Must be familiar with safety procedure within the site.
• Have experiences in working in large scale projects.
• Candidate with LTA experience advantage.
• Willing to be based in site.

Responsibilities:

• Work hand-in-hand with the project team to create a mutual understanding of the project strategy based on the requirement of the job
• Must need to complete board piling opertation course
• Need to complete crane Erector course
• Conduct in-depth reviews and analysis of all project or contract documents so as to be familiar with every detail and/or requirements
• Work with safety units in a bid to plan and manage safety programs for each project and make sure that all aspects of safety are reached
• Help project managers and engineers in the arrangement and analysis of projects and scheduling of reports on projects
• Oversee projects as they are being carried out to make sure that the work is done according to outlined specifications, and that they also conform with project timetable
• Convey project needs from the project manager to the management of the firm. For example, in a case whereby extra funds are needed for the completion of a project, the project manager communicates the situation to the management of the company usually through the construction operations manager
• Assist in the maintenance, development, and enhancement of the company’s relationship with contractors in a bid to produce strategic partnership
• Train and mentor employees in areas of project management and estimating.

Requirement

Good and effective communication skills,Good analytical and organizational abilities are of great importance

• Possess good leadership ability, as well as ability to work as part of a team or even lead a team when called upon
• Ability to be proactive and also to foresee events and react appropriately towards them
• The ability to multitask and strategize in different situations is also relevant
• Ability to work and carry out projects within a stipulated time frame or deadline
• Masters degree in any management or engineering field will be an added advantage
• At least 5 years on-the-job experience in a similar role or in any other construction capacity.

Responsiblities :

1) To manage and coordinate site steel structural Work.

2) To coordinate with main con on design and detail.

3) Oversee operation on a day to day basis.

4) Ensure the works are done in safety, on time and within budget. 5) Mediate on site conflicts.

6) willingness to work a flexible schedules.

Qualifications :

1) Degree in Structural Engineering.

2) Knowledge in Auto Cad, BIM Modelling and Tekla Software.

3) 3-5 years experience in a construction environment.

4) Budget Management experience require.

5) Valid class 3 Singapore driving licence.

Company Description

Innovez Engineering is a Singapore-based company that specializes in the design-and-build of large commercial and residential swimming pools, spas, and water features. As a pioneer in the construction of stainless steel swimming pools in Asia, Innovez Engineering challenges the boundaries of conventional swimming pool building by constantly innovating engineering and building methods. The company provides a complete spectrum of products and services integral in the design, construction, and operation of swimming pool facilities, including consultancy, design engineering, construction works, maintenance services, and manufacture, supply, and installation of high-grade aquatic equipment and systems.

Role Description

The role is responsible for day-to-day tasks associated with project management, engineering, cost management, quality control, documentation and reporting, and site coordination. The Project Engineer will be part of a team that designs and builds large-scale commercial and residential swimming pools, spas, and water features from the ground up. The role oversees all aspects of the construction projects, ensuring their timely completion within budget and in compliance with regulations. The role will also involve collaboration with architects, contractors, and other stakeholders to ensure efficient project execution.

Qualifications

• Minimum 5 years experience in building and construction, or related field.
• Bachelor's or Master's degree in Mechanical, Electrical, Civil Engineering or related field.
• Strong project management skills to manage resources, track project status and mitigate risks.
• Excellent communication skills to effectively manage project timelines and budgets, as well as coordinate with stakeholders, contractors, and suppliers.
• Expertise in project engineering to ensure that designs comply with engineering standards and applicable regulations.
• Experience in project planning to develop project scopes, objectives, and schedules that align with business goals.
• Mechanical and electrical engineering skills to design and develop electrical systems for swimming pool facilities.
• Experience in swimming pool construction or related field is a bonus.
• Experience in Autocad, Microsoft Office, Microsoft Project.

Interested candidates should apply with details on last drawn salary and reasons for leaving current job.

Responsiblities :

- Preparing steel and Archi Work.

- Planning man power and supervise work.

- Hardworking & responsible personnel with minimum supervision.

Requirement :

- Minimum secondary level

- 2 years and above Singapore construction industry experience

- Good technical knowledge

- With Singapore class 3/4 driving license

Responsibilities:

• Manage financial and administration teams to achieve company financial goals.
• Develop the overall corporate financial goals and objectives.
• Oversee preparation of financial records related to general ledger, payroll, budget, expense, etc.
• Assist in account receivable and payable activities.
• Maintain accurate bank records of cash withdrawals and deposits.
• Follow standard accounting process for financial analysis and reporting activities.
• Assist in developing and managing budgeting system.
• Manage all client accounts for payment settlements.
• Track and monitor resource needs and other material needs for carrying out financial and administration tasks.
• Monitor and manage expenses within allotted budgets.

Requirements:

• Minimum of 2 years of accounting experience
• Demonstrable proficiency with Microsoft Word, Excel, PowerPoint, Access and other accounting tools
• Good communication & interpersonal skills

• Daily Update of Project/Operation Progress to immediate superior.
• To have and maintain good daily attendance and punctuality.
• To update team member at least 2 working days in advance before going for leave, in order to minimise downtime.
• Manage and monitor the foreman and workers for right attitude, behaviour and manner working in workshop.
• Ensure, understand and meet in detail Scope of Work, Specifications and project requirements on the equipment/vehicles.
• Planning of the materials requirement and coordinate with logistics procurement.
• Organise in the daily and weekly logistic coordination meeting with team.
• Check the project required mandatory courses for workers and arrange for training in line with training matrix.
• Check and ensure all workshop activates shall ongoing well with quality and safety.
• Plan and prepare minimum One month in advance Manpower, Material, Machinery as per given task.
• Work Progress Update And Mitigation Plan Discussing In Daily Toolbox Meetings and Weekly Meetings.
• Perform inventory check on RMC equipment and machineries and update condition on the items.
• Update feedback to superior on the machineries and equipment activities regularly.
• Upgrade own self and attend the relevant industry training continuously to meet the market requirement and have the competency.
• Continuously monitor and identify the potential worker from workforce, coaching with leadership skills and update to HQ .

Responsibilities:

• Reporting to the Project Manager/ Project Director/ Business Unit Head.
• Jointly prepare the project start-up and execution plan with the Project Manager, as well as define key project targets in terms of time, cost, quality, resources, EHS, and contractual.
• Manage and plan every stage of a construction project and ensure the project is completed safely, within budget, on time while achieving the desired quality.
• Manage resource deployment and overall management of site at all stages of construction works.
• Manage the procurement of material and stock control, as well as the timely delivery of equipment, building components, and any other related logistics arrangement at all stages of construction works.
• Manage subcontractors, including monitoring of manpower, work progress, and scheduling of their works.
• Work closely with client representatives and consultants in all project matters, especially relating to contracts, construction, and EHS issues.
• Establish appropriate reporting and controlling procedures to improve project operations and delivery.
• Drive the implementation of innovative construction methodologies and practices on-site to improve productivity and achieve lean outcomes.

Requirements:

• Degree in Civil Engineering or related.
• 5-10 years experience in project management and/ or site management works for building projects and multi-level basement construction.
• Strong technical understanding of construction methodologies and sequencing, with a special interest in precast and DfMA technology;
• Good leadership skill and a team player

Job Responsibilites

• Manage the overall delivery of the project on or ahead of time with all client expectations met.
• Assign resources to deliver the works within budget, time, quality and regulatory standards, monitor and guide workflow, setting daily, weekly and long-term project goals.
• Manage the specialist functions of design, engineering, procurement and construction, manage the interaction of various disciplines and multiple work streams.
• Review progress against plans, contractual arrangements and delivery milestones to ensure they are on schedule and within quality and cost estimates and take effective remedial action as required.
• Financial Management: Ensure strong contract, commercial and financial risk management, accurate forecasting of both costs and revenue, take corrective action in line with CCCC authority and reporting frameworks and maximise the profit margin for the project.
• Demonstrate leadership in risk management, compliance and auditing and ensure legislative, pre-contract and commercial obligations are met, including compliance with the relevant Building Code.
• Stakeholder management: Ensure that stakeholders are actively engaged and that beneficial relationships between the project and the client, subcontractors, community and other external parties are developed and maintained.
• People management: Monitor staff and labour resourcing to ensure the project has the capability to achieve targets, supervise workforce, including subcontractors and foster a high performance team with a positive employee relations environment.
• Contribute to new business, continuous improvement and broader business activities.
• Coordinate with headquarter and site team to obtain enough resources for the projects.
• Organize a proper project management team & plan to carry out the construction works.
• Perform all duties in accordance with company’s polices, processes, systems, reporting and procedures.

Job Requirement:

Minimum 15 years of engineering experience with Degree in Civil Engineering recognised by the PE Board or qualification acceptable to the Commissioner of Building Control as eligible for applicant as a Resident Engineer or Recognised Degree in the relevant field subject to the acceptance of the Engineer. At least 10 years of experience in managing design and construction teams for project of similar scale and complexity.

Responsibilities:

• To maintain operations by preparing policies and standard operating procedures
• Assess, manage, and develop an effectiveoutlet performance development plan for the team while ensuring alignment of resources with business needs
• To establish and determine the overallbrand business plan by surveying market demand
• To control purchases and inventory
• Negotiating prices and contracts
• Monitor the quality of preferred supplier lists
• Prepare and submit relating report todirector
• Review the financial report prepare by Account Department
• Achieve the sales and profit targets as set by Management
• Any other duties as assigned by Director