Responsibilities

• · Leading Process Design Team for Oil & Gas Projects and guide a team of about 10 Process Design Engineers / Designers to finish the Process design (start from Basic design to Detail Design) of the project.
• · Leading a Team of Process Engineers & Designers in Preparation & Review of PFD, P&IDs, MSD, PSD, Hydraulic calculations, Equipment sizing calculations, BOG calculations, Heat Loss calculations, Tank Venting calculations, Tank capacity calculations, Heating coil calculations, PSV calculations, Process data sheets for Equipment’s such as pumps, compressors, Refrigeration unit, Tanks, Process data sheets for Instruments such as control valves, PSV, PT, TT, LT, Flow meter, Process line list, Heat & Material Balance, HAZOP & SIL Study, Operation Manual, Process control Narrative, Cause & Effect Diagram, Surge Analysis.
• · Review & Checking of Process Documents such as PFD, MSD, P&IDs, Hydraulic Calculations, Process Data Sheets, Surge Analysis, Design Calculations etc to ensure that all the Process documents comply to applicable Codes & Standards and Project Requirements
• · Review & Checking of Surge Analysis report using Pipenet Transient Module for product loading/unloading operation, fire water network systems etc.
• · Review & checking of various process philosophies like Process Control Philosophy, Operation Philosophy, Cause and Effect diagram, Flare and blowdown philosophy, isolation philosophy, Vent & Drain philosophy, shutdown philosophy.
• · Participation in Design Review, HAZOP Study, SIL Study, HAZID Study, ALARP, Bow Tie, MAHM, RAM Study, Alarm Rationalization workshop, SIMOPS, Constructability review carried out during various stages of project.
• · Review Hazop Report, SIL Assessment & Verification Report & Responsible for Closure of all Hazop & SIL Study Recommendation
• · Preparation & Implementation of checklist for all Process Documents
• · Management of Process Discipline Engineers Team for development of Process Design of Major Projects from feasibility studies through Conceptual Design to Detail Engineering.
• · Pre-Bid, FEED & Detailed Design documents review.
• · Maintain Design integrity and quality within the Process Engineering Team.
• · In-house Engineering Activities and Process Engineering Man Hours Estimation and Schedule.
• · Preparation, Monitoring and Control of Process Engineering Document Control List and expedite for delay/ approvals/resolution of open issues.
• · Responsible for Process Engineering Execution Methods and Procedure, Process Engineering Disciplines Co-ordination, Process Engineering Deliverables delivery for Project Execution, Process Man-hours Monitoring, Attending design review Meetings with Clients and Package vendors, PSSR+HAZOP+SIL study.
• · Inter Discipline Review of other Discipline Documents including vendor documents, GA drawings, Instrument data sheets etc for consistency, quality and Design Integrity.
• · Review of Authority submission documents like Fire Fighting Calculations (Fire & Foam network hydraulic and Surge Analysis, Fire Fighting Design Philosophy).
• · Development & Review of automated excel spreadsheets for process calculations.
• · Preparation, Monitoring and Control of Engineering Document Control List and expedite for delay/ approvals/resolution of open issues.
• · Review and ensure that all Process works are carried out in accordance with project specification. Maintain Design integrity and quality within the Process Engineering Team.
• · Preparing Process Engineering schedule and Process Engineering Man hours estimation to meet project requirements.
• · Co-ordinate with other Discipline for Process Inputs and ensure seamless Inter Discipline co-ordination between Process and other Discipline.
• · Job assignments, Mentoring and Supervision of works for Process Designers and Design Engineers.
• · Technical assistance to construction activities and attending to Site Queries.
• · Reviewing Vendor Drawings for Equipment’s and Instruments in terms of Process.
• · FEED & Pre-Bid works which involves Feasibility study.
• · Participates in discipline and inter-discipline design check and screening meetings for compatibility, completeness, and correctness in works.
• · Implement HSE objectives, policy, and company HSE procedures within his authority limit.
• · To integrate Risk-based thinking and HSE considerations into business decisions, plans and operations with the commitment to eliminate and reduce HSE hazards, aspects and risks.
• · To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.
• · To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects, and risks.

Requirements

• · Preferably Bachelor’s Degree in Chemical Engineering
• · Preferably to 15 years in Oil & Gas industry

Software Requirements

• · Proficient in Pipenet, Hysis, MS Excel, MS Word

Code Knowledge

• · API 2000, API 520, API 521, API 526, API 2350
• · SS 532
• · NFPA 11, NFPA 13, NFPA 15, NFPA 20, NFPA 30

Responsibilities:

• Make orders for construction materials and other items as requested.
• Ensure timely delivery of orders.
• Ensure all delivery orders are in accordance to PO and verification of DO for preparation of payment.
• Call for quotations and source for new supplies if need and recommendation of award.
• Work closely with site team for material purchases.
• Process and generate PO/RO
• All other tasks assigned
  
  Requirements:
• GCE O/A Levels or Diploma qualifications.
• Prior experience in working in construction industry is preferred.
• At least 3 years of relevant working experience.
• Proficient in Microsoft Office.

• Manage, design, develop, create and maintain small-scale through to large-scale construction projects in a safe, timely and sustainable manner.

• Conduct on site investigations and analyze data (maps, reports, tests, drawings and other).

• Carry out technical and feasibility studies and draw up blueprints that satisfy technical specifications.

• Assess potential risks, materials and costs.

• Provide advice and resolve creatively any emerging problems/deficiencies.

• Oversee and mentor staff and liaise with a variety of stakeholders.

• Handle over the resulting structures and services for use.

• Monitor progress and compile reports in project status.

• Manage budget and purchase equipment/materials.

• Comply with guidelines and regulations including permits, safety etc and deliver technical files and other technical documentation as required.

• Working with a team of fellow engineers and construction crews to organize and complete projects.

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,

RESPONSIBILITY
· Plan and allocate tools, material and manpower for fabrication;
· Ensure that all the technical reviews by engineering team comply with project requirements;
· Coordinate all technical queries with related parties – engineering team, client, vendor etc;
· Assist Project Manager in streamlining work processes;
· Coordinator with team to review all subcontract and supplier shop drawing, product data, samples,
manuals etc for all compliance with contract documents;
· Manage vendor documents for all equipment;
· Monitor and ensure all the vendor equipment delivery are on time, including checks on inspection status and requirement;
· Prepare tender submission, cost estimation and project change request;

*Prepare monthly P&L reporting.

*Able to use AutoCAD – Advance Steel Software.
· Any other duties as assigned.

Please note that duties of the Employee may change and develop over time.

REQUIREMENTS

· Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Mechanical) or equivalent

· Proficient in design software such as PV AutoCAD

· Proficiency in English language (spoken and written) with strong communication skills

Key Responsibilities:

• Download bank statements.
• Record and update cash books.
• Coordinate, check, and prepare site claims.
• Maintain subcontractors’ payment lists for the Contracts department.
• Prepare payments according to payment schedules and credit terms.
• Liaise with banks for administrative tasks and online applications.
• Perform other assignments, projects, and analyses as required.

Requirements:

• Diploma or higher qualification in Accounting.
• Minimum of 1 year of post-qualification experience, preferably in the construction industry.
• Proficiency in UBS accounting software and strong Microsoft Office skills.
• Good analytical and problem-solving skills; able to work independently under tight deadlines.

Responsibilities:

· Assist the project manager with on and off site meeting pertaining to the technical issues

· Responsible for submission of Architectural samples, shops drawing and other related documents to the consultants or authorities

· Coordinate and monitor work progress at site including periodical site inspection and attending meetings during course of construction of project

· Proven problem solving and achievements work progress according to the work schedule

· Site supervision and able to coordinate well with sub-contractors, RE and RTOResponsibilities:

· Assist the project manager with on and off site meeting pertaining to the technical issues

· Responsible for submission of Architectural samples, shops drawing and other related documents to the consultants or authorities

· Coordinate and monitor work progress at site including periodical site inspection and attending meetings during course of construction of project

· Proven problem solving and achievements work progress according to the work schedule

· Site supervision and able to coordinate well with sub-contractors, RE and RTO

Requirements:

· Degree in Civil/Structural Engineering (recognized by Singapore PE Board)

· Minimum 5 years’ of precast experience in commercial and condo building projects

• Reports to the Design Manager
• Review/Develop design drawings and documents in accordance with project requirements
• Coordinate all design related matters and participate in regular/ad-hoc meetings with Clients / Design consultants / Viaduct specialists / Subcontractor
• Monitor and update design schedule regularly
• Prepare & review shop/fabrication drawings for temporary/viaduct structure
• Support Design manager & lead in-house design engineer/drafter

Job Requirements

• Minimum Degree in Civil Engineering or equivalent
• Minimum 3 years of relevant experience of design & construction of bridge/ viaducts/ roads/ highways
• Candidate with experience in LTA (Road/MRT/Viaduct) is preferred
• Technical expertise and knowledge of concrete material & structure design
• Proficient in proposal for structural systems
• Proficient in AutoCAD
• Proficient in Structural Analysis Software (MIDAS, SAP, STAAD etc.)
• Good attitude towards work and timeline
• Independent, analytical and good interpersonal skills
• Location : Woodlands
• Project : Viaducts

Job Duties & Responsibility:-

• Manage tender projects and on-going projects

• To prepare contract documents, taking off measurement, providing cost estimates and tender submissions

• To prepare project cash flow forecast

• Monitor project budget and costing

• Submission of main contract progress claims and variation orders

• Liaise with Consultants and developers on progress payments and VO matters

• Procurement including preparation of tender documents, call quotations and evaluate tender submissions

• Interview and negotiate with sub-contractors and suppliers, and make recommendations of award

• To prepare contract documents to sub-contractors and suppliers

• Evaluation and certification of suppliers/sub-contractors progress payments

• Evaluates and verifies sub-contractors variation orders

• Settlement of final accounts

Requirements:-

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Civil) or equivalent.

• Required language(s): English (Able to liaise with English and Chinese-speaking associates is preferred)

• At least 3 Years of working experience in the related field is required for this position.

• At least 3 Year(s) of working experience in 2D and 3D drawing, BIM modeling, AUTOCAD

• Preferably Senior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.

• Able to work independently

• Details and meticulous

• Preferable for candidates who can start work immediately

• Singaporeans are welcome to apply.

• 5.5days during probation, alternate Saturday off upon confirmation of employment.

• Working Hours : Mon-Fri 9-6pm/ Sat 9-1pm

Job Description

• Review and interpret all relevant drawings, specifications and reports;
• Handle full scope of Quantity Surveyor duties which includes material take-off and variations i.e. Structural works; Piping works; Electrical and Instrumental works; Mechanical and Equipment works; Painting works
• Able to understand the Project contract documents and inform and assist site team for the cost estimate for any additional works
• Prepare the commercial tenders, including material take-off, preparation of BQs and technical queries
• Analyse tender pricing and prepare contractors’ bill of quantities
• Manage all related stakeholder liaison activities with a range of interested parties i.e. contractors, subcontractors, consultants and authorities on the project including but not limited to Contracts & Legal Department, Engineering Department and External Consultants;
• Prepare monthly progress claims to client
• Manage subcontractor and vendor claims
• Manage project timeline and cost

Requirements

• Candidate must possess at least a Bachelor’s degree or equivalent in Quantity Survey, Engineering (Mechanical/Civil).
• Minimum 8 years of relevant working experience in the oil and gas industry and familiar with EPC projects
• Meticulous, analytical, eye for details and a good team player
• Ability to multi-task in a fast paced and dynamic environment
• Prior experience in leading a Quantity Surveyor team will be advantageous and can be considered for a senior role.
• Able to commence on short notice will be preferred

Job Description

• Configure and manage critical systems, including Active Directory (AD), telephony, video conferencing, access points (AP), firewalls, VPNs, and more. Monitor and analyse the performance of LANs, WANs, and wireless networks to ensure optimal functionality.
• Configure laptops and desktops for new and existing staff, perform system backups, and handle disaster recovery (DR) as needed. Ensure all automatic system backups are in place.
• Apply system patches after hours to maintain system stability and security. Perform routine system checks to ensure continuous operations.
• Work with third-party support vendors to resolve technical issues. Participate in IT auditing and documentation to ensure compliance with company policies.
• Provide IT support for approximately 200 users, managing user accounts and roles within the ERP system. Troubleshoot login issues, assist with basic system navigation, and resolve minor technical problems.
• Monitor ERP system performance, address minor issues, apply updates, and generate routine reports for departments like finance, HR, and inventory. Customize reports based on user requirements.
• Maintain documentation for common IT processes, user guidelines, and troubleshooting procedures. Optionally, assist with creating and launching new business processes within the company.
• Perform routine backups, monitor system security, and follow compliance protocols under the guidance of the IT team.

Requirements

• Diploma or Degree in IT/Computer Science.
• Possess CCNA / Microsoft certification.
• Proven experience in providing technical support in a corporate IT environment.
• Experience with Veeam and Microsoft 365 administration.
• Familiarity with leading wireless vendors’ products (Cisco/Meraki, Aruba/HPE, Ruckus) is advantageous.
• Knowledge of virtualization technologies such as Hyper-V and VMware is a plus.
• Strong communication and administrative skills.
• Ability to manage multiple tasks and prioritize in a fast-paced environment.

We value all applicants and thank you for your interest. However, please be advised that only shortlisted candidates will be contacted.

• Manage, design, develop, create and maintain small-scale through to large-scale construction projects in a safe, timely and sustainable manner.

• Conduct on site investigations and analyze data (maps, reports, tests, drawings and other).

• Carry out technical and feasibility studies and draw up blueprints that satisfy technical specifications.

• Assess potential risks, materials and costs.

• Provide advice and resolve creatively any emerging problems/deficiencies.

• Oversee and mentor staff and liaise with a variety of stakeholders.

• Handle over the resulting structures and services for use.

• Monitor progress and compile reports in project status.

• Manage budget and purchase equipment/materials.

• Comply with guidelines and regulations including permits, safety etc and deliver technical files and other technical documentation as required.

• Working with a team of fellow engineers and construction crews to organize and complete projects.

Duties & Responsibilities

• Responsible for full sets of Accounts
• Prepare month-end and year-end financial statements
• Prepare financial statements, payments, AR billings, journals, monthly schedules, bank statement reconciliations, staff reimbursements, GST submission etc.
• Prepare management reports i.e. project analytics, revenue, costs, cash flows, AP, AR, Related Party Transactions reconciliation for group reporting & etc.
• Liaise with internal and external parties on billings, payments, reconciliations, audit, taxation matters
• Assist in banking matters, account opening, LC, insurance bond & etc.
• Assist in corporate secretarial activities
• Coordination for physical inventory and fixed assets count on an ad-hoc basis
• Responsible for statistical filing
• Hands-on and work with other team members for finance deliverables

Requirements

• Accounting Degree, Partial ACCA or other relevant qualifications
• Minimum 3 years of experience in handling full set of accounts with reputable companies
• Proficient in MS Excel, Words, PowerPoint & etc
• Good communication, organization and administration skills
• Hand-on experience in Navision accounting software is an advantage
• Experience in construction industry is an advantage

Job Description

• Provide administrative and contractual support and maintain all required project information throughout each project for claim purposes to ensure that the claim data are up-to-date and comprehensive.
• Verify the accuracy of survey data, including measurements and calculations conducted at survey sites.
• Consult with clients, vendors, personnel in other departments or construction foreman to discuss and formulate estimates and resolve issues.
• Prepare progressive claims and potential variaton claims at regular intervals of the project.
• Maitaining proper documentation of correspondence from contract award to job completion to ensure all relevant claims are lodged accordingly to the client timely.
• Ensure proper closing-out of project account finalization.

Job Specification

• At least a degree in Civil Engineering or equivalent.
• At least 8 years of Singapore based Quantity Surveyor working experience in the related field is required for this position.
• Candidate with experience in Engineering, Procurement, Construction (EPC) will be preferred.
• Willing to work in the West.
• Remuneration will be commensurate in according to working experience.

Responsibilities

• Able to use primavera 6 and Microsoft project for project scheduling
• Gather pertinent data, perform related calculations and analyse schedule impact, include critical path method (CPM).
• Produce and maintain the good quality work on project schedule, inclusive frequent updating project schedule with physical site progress
• Able develop progress reports, daily, weekly and monthly basis (e.g., overall S-curve, plan vs actual table)
• Proactively engage and communicate with Construction Team on schedule matters for developing quality schedule and updated the status
• Determine project requirements and estimate resources by allocating correct resources such as manpower, materials and equipment.
• Coordinate between interdisciplinary for logical connection among activities.
• Prepare construction schedules, resource and cost loaded with governance of major project milestones stated in the project contract.
• Oversee the master schedule and highlight deviations that critical enough to pay attention to supervisor/project management team.
• Coordinate with Contract Engineer on project progress claims matters.
• Interface with sub-contractors and client’s representative to finalise the baseline schedule.

Requirements

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Environmental/Health/Safety), Logistic/Transportation or equivalent.
• At least 4 year(s) of working experience in the related field is required for this position.

Roles & Responsibilities

• Provide technical advice and support for daily operational issues.
• Perform inspections of welding, structural fabrication, and piping systems to ensure compliance with industry standards.
• Review piping isometric drawings and verify that materials meet specifications.
• Coordinate and oversee NDT activities, including radiographic testing (RT), and ensure accurate results through proper witnessing and review.
• Conduct thorough inspections and assessments during plant shutdowns, documenting findings and reporting discrepancies.
• Assist in the development and implementation of quality control procedures.
• Participate in safety meetings and ensure compliance with health and safety regulations.
• Maintain accurate and organized records of inspections, reports, and certifications.
• Collaborate with engineering and construction teams to ensure design specifications are met.

Qualifications:

• Minimum of 3 years of experience in plant inspections or related fields, especially during shutdowns.
• Valid certification in at least one API area (API 510, API 570, or API 653).
• Knowledge and experience in welding inspection, structural fabrication, and piping materials.
• Proficient in MS Office and CAD/CAM software.
• Familiarity with industry standards and codes (e.g., ASME, ASTM).
• Experience with non-destructive testing methods (UT, PT, MT, VT) is a plus.
• Strong communication skills, both written and verbal, for effective collaboration with team members and clients.
• Ability to work in a fast-paced environment and manage multiple priorities.

Construction company requires an EHS OFFICER.

Construction company requires an EHS OFFICER.

Construction company requires an EHS OFFICER.

Construction company requires an EHS OFFICER.

Construction company requires an EHS OFFICER.

Construction company requires an EHS OFFICER.

Construction company requires an EHS OFFICER.

1. Able to work independently on company admin and account relationed works

2. Good working atitude

3. Must have related experience for Interior designing and Carpentry manufacturing industry

4. Able to correspond with Company working staff

5. Must able to use Microsoft Excel

Job Descriptions:

• Conduct surveys on land sites and properties
• Examine previous records and evidence to ensure data accuracy
• Research and design methods for survey processes
• Use equipment and tools to accurately measure land features (e.g. longitudes, latitudes)
• Build maps, sketches, and charts
• Supervise and provide guidance to field staff
• Purchase and maintain equipment
• Report on survey results and present findings to clients
• Collaborate with engineers and architects on several projects

Requirements and Skills:

• Previous experience as a surveyor or in a similar role
• Working knowledge of GPS and GIS
• Tech savvy, including familiarity with CAD software
• Aptitude in math and problem-solving
• Attention to detail
• Great organizational and leadership skills
• Degree in Civil Engineering or a similar field
• Valid certificate is required

Additional Information:

• Working Location: 65 Jalan Lam Huat, Hw Point @ kranji Singapore 737652
• Working Days: 6 Days
• Working Hours: 8:30am to 5:30pm (Mon to Sat)

• Support HR-related administrative tasks.
• Verify workers' job cards and timesheets for payroll processing.
• Maintain accurate records of leave entitlements, including annual, medical, and other types of leave.
• Handle applications and renewals for Work Permits
• Coordinate training programs for workers
• Assist with ISO, Green & Gracious, and other audit preparations.
• Perform ad-hoc administrative duties as needed.

Requirements

• Detail-oriented and meticulous in work.
• Capable of thriving in a fast-paced environment.

• Report to the Planning Manager.
• Responsible for planning the overall schedule.
• Review and monitor the progress of the project while taking into consideration the schedule, cost control and risk management.
• Coordinates with construction team to report the reason of delay, potential risks and mitigation measures in consideration of understanding overall work sequence with planned resources
• Prepare project progress reports.

Job requirements:

• Degree in Civil Engineering or its equivalent
• Minimum 15 years of relevant experience with A1 MNC construction firm is essential for this position
• Candidate should possess relevant experience in construction planning and program coordination for major infrastructure projects
• Experience in projects with international EPC contractors or mega projects with contract amount higher than S$500 million is highly preferred.
• Proficient in Primavera P6, MS Project and ERP is mandatory for this position
• Strong background in both technical and contractual issues
• Self-motivated, independent individual and possesses great initiatives
• Good interpersonal skills
• Past experience with LTA project(NSC) is an added advantage
• Location : Woodlands
• Project: Viaducts

• Track changes to the Design/ Construction work and adjust budget projections accordingly
• Price/ forecast the cost of different materials required for the project
• Procurement responsibilities including preparing tender document or calling for quotation for subcontract packages including evaluation through cost comparison as well as recommendation of awards
• Certificate and evaluate progress work done; includes contract administration for any variation or change for both Subcontracts and Main Contracts
• Prepare and followup monthly progress claims in timely manner
• Perform other QS-related duties as assigned by the Reporting Supervisor

Requirements

• Possess Diploma or Degree in Quantity Surveying or its equivalent

Responsibilities:

• Perform Quantity Take-off and understanding of requirements in each tender that meet client’s expectation.
• Evaluate and recommend the award of construction contracts.
• Participate in on-site and consultant meetings, collaborating with clients, architects, and associate consultants for effective project administration.
• Assist the Project Manager in all contractual and costing matters, ensuring compliance with procurement procedures.
• Prepare valuations, pricing, and agreements of contract variations, process claims, and monitor project cash flows.
• Verify subcontractors’/suppliers’ monthly progressive claims, obtain approval, and prepare payment certificates.
• Prepare and submit monthly payment claims to project owner.
• Review and revise contract terms and conditions as necessary.
• Call for quotations, prepare, and compile tender documents.
• Evaluate tender submissions and prepare tender clarification questions.
• Attend tender interviews as required.

Requirements:

• Possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree in Quantity Surveying, Civil Engineering, or equivalent.
• Minimum of 5 years of relevant experience in the construction or built environment industry.
• Previous experience in pre- and post-contract work for HDB BTO projects are preferred.
• Highly motivated individual with strong confidence, drive, and exceptional interpersonal skills.
• Well-organized and able to perform under pressure.

* To provide mechanical engineering design expertise during the detailed design phase

* Will be involved in all aspects of the mechanical engineering design and installation supervision

* Engineering package development for cogeneration, flue gas treatment, pressurized equipment, pump, fan, piping etc.

* To prepare tender documents, b i d analysis, operating & maintenance procedures, mechanical drawings and piping layout.

* Assist in the assessment of construction costs, maintenance cost, and safety studies.

Key Responsibilities:

• Coordinate and participate in meetings with clients and technical teams to resolve variation orders (VO) and other contractual matters.
• Negotiate pricing with subcontractors for awarded packages, and prepare essential documents, including Letters of Intent (LOI), and Subcontract Agreements, along with contractual review reports.
• Manage variation orders, and issue payment certificates to subcontractors until final account settlement, including applying contra charges where applicable.
• Oversee the preparation of progress claims and provide detailed information to the Project Director/Manager for quantification and variation claims.
• Manage progress claims, update progress payments, and handle variation orders.
• Attend meetings with clients, subcontractors, and the project team to discuss additional work requirements and verify progress claims and payments.
• Drafting correspondence letters related to contract matters.
• Advise the project team on contractual rights, complaint resolution, and VO settlements.
• Conduct cost exercises, summarize bid details, and lead commercial negotiations with suppliers and subcontractors.
• Evaluate tender proposals, clarify terms, and ensure budget alignment.

Job Requirements:

• Possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree in Quantity Surveying, Civil Engineering, or equivalent.
• Minimum of 5 years of relevant experience in the construction or built environment industry.
• Previous experience in pre- and post-contract work for a MNC and international scale projects is advantageous.
• Highly motivated individual with strong confidence, drive, and exceptional interpersonal skills.
• Well-organized and able to perform under pressure.