ADMINSTRATIVE FUNCTIONS

• Prepare all necessary work or purchase orders in the course of his duties to maintain and manage the property and as and when directed by the CM.
• Prepare and submit maintenance reports to the CM
• Attend to inquiries, complaints, reports and correspondence relating to the administration of the Corporation, its property and Subsidiary Proprietors.
• Evaluate contractors’ performance and to submit evaluation reports to the CM.
• Enforce and administer the service contracts and to act upon the terms and conditions or agreements made under these contracts.
• Monitor expiry of licenses, contracts and any other form of documentations, and to advise the CM of such expiry as and when necessary.
• Manage and maintain inventory of all equipment and supplies used for the operations of the property.

FINANCIAL FUNCTIONS

• Collate and prepare all incoming invoices with supporting work or purchase orders and submit to the CM for their recommendation for payment.
• Keep proper records of all work and purchase orders.

MANAGEMENT AND MAINTENANCE FUNCTIONS

• Supervise all contracted works.
• Implement preventive and corrective maintenance plans.
• Plan, organize and execute periodic checks on services as well as contracts.
• Execute directions given by CM with regard to the operations of the property.
• Any other duties assigned by the CM.

Job Requirements:

• Candidate must possess at least a diploma in Estate Management, Building Services Engineering or equivalent.
• 2-3 years with Diploma holders preferred. Those without diploma but with 3-4 years Property management experience could apply for the job.
• Minimum 4-5 years of MCST experience for Diploma holders and have experience in handling more than 1000 units.
• Basic knowledge of BMSMA Act.

We regret that only shortlisted candidates will be notified.

Thank you for applying.

Job Descriptions

• Coordinate with Structural team, Archi team, MEP team and respective sub-contractors to carryout necessary setting out.
• Cross check all the dimension from the drawing and that in the BIM model.
• Liaise with Registered Surveyors for pre-computation plan drawing, setting out and as-built survey for TOP.
• Receive and acknowledge control points from the registered surveyor and ensure that all control points are properly and effectively protected.
• Carry out Primary and Secondary Control Points survey periodically.
• Carry out topographical survey as and when directed.
• Reporting verticality monitoring, soffit level, slab level monitoring to engineers for follow up action.
• To ensure that all survey instruments, total stations and level are calibrated according to specifications at specified intervals.
• To ensure surveying equipments are within range of precision specification to produce best result and accuracy.
• To cover more than one project survey works simultaneously upon requested.
• Carryout differential levelling and trigonometrical levelling as and when necessary.
• Set up secondary control points
• To provide grid/reference lines for every floor by the next day of slab concrete casting without delay.
• Setting out for all construction works such as temporary sheet piling, ERSS, all sort of piling, pile-caps, retaining walls, tower crane piling/ pile-caps, buildings, boundary lines, infrastructures, landscape, hardscape, drainages, special features etc.
• Ensure all setting out are within surveying tolerances.

Requirements

• Degree in surveying / engineering or equivalent. Diploma (or equivalent) holders with relevant experience will also be considered.
• Minimum 3 years of relevant working experience
• Well verse in surveying technology and in using all kind of surveying equipments.
• Good understanding of standard accuracy and tolerances of construction survey.
• Proven track record in land surveying.
• Independent, diligent, meticulous and highly motivated with excellent team spirit.
• Proficient in Microsoft Office, AutoCAD and good knowledge of BIM.

• Well Established Company
• Basic $4000 - $5000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Central
• Working days: Monday to Friday
• Working hours: 8.30am – 5.30pm

Job Responsibilities:

• Follows up on the pre- and post-contract administration of the project assigned to
• Covers efficient methods for conducting tendering activities, such as risk assessment, the development of a tender file
• Assist to prepare tender and contract documents including bills of quantities
• Administer the tender process, evaluate tenders, and submit tender recommendation reports
• Reviews work specifications, take-off quantity, costing and including liaise with Clients, Sub-Contractors, Consultants and Suppliers, and other stakeholders if require
• Possess strong knowledge of Contractual terms and works to ensure that Project Team adheres to Contractual Terms and Conditions
• Assists in resolving contractual and commercial issues with Consultants and Suppliers, and other stakeholders if require
• Co-ordinates the procurement of materials and suppliers for the projects and ensures expenses within budget
• Track of any variations for ongoing projects that may affect costs
• Responsible for the Valuation of progress monthly payments, claims, and final account settlement with Clients, Subcontractors, and Suppliers
• Undertake cost analysis for repair and maintenance project work
• Attends to all contract administration matters and maintains proper documentation of the project
• Attends site and other meetings as required
• Prepare and submit catalogues and sample boards
• Other ad-hoc duties as assigned

Job Requirements:

• Possess minimum Diploma/Degree in Quantity Surveying / Electrical / Mechanical or its equivalent with 1- 2 years of relevant experience
• Possess knowledge in Cubi cost software will be an added advantage

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Description

a) Report to the Manager/Team leader as shown in the organization chart. Responsible for the coordination and control of technical matters, quality implementation and site supervision works.

b) The detailed duties and responsibilities includes but not limited to the following:

• Coordinate with all the parties including sub-contractors and consultants to solve and coordinate technical issues, production of drawings and ensure proper transmission of data to all parties involved. Ensure that the detailed schedules of drawing production and site progress are met.
• For quality management, the coordinator is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Supervise site works according to the quality and EHS requirements.
• Handle all inspections and handing over process with the final objective of achieving customer satisfaction and high Conquas/QM score.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Degree in Architecture / Engineering
• Minimum 2-3 years' experience in BIM Drafting (Architectural or M&E)

Job Responsibilities

• Assist in the planning and coordination of events from start to finish.
• Support logistics management, including venue setup, catering arrangements, and equipment rentals.
• Help create promotional materials and assist with event marketing efforts.
• Communicate with vendors, clients, and attendees to ensure smooth event operations.
• Participate in event setup and breakdown, ensuring all aspects are executed seamlessly.
• Stay on-site during events to provide support, troubleshoot issues, and ensure a positive experience for attendees.
• Conduct research on event trends, venues, and vendors to support planning efforts.
• Assist with post-event evaluations, including collecting feedback and data analysis.

Job Requirements

• Currently pursuing a diploma or degree in Event Management, Hospitality, Marketing, Communications, or a related field.
• Strong organizational skills and attention to detail.
• Excellent communication and interpersonal abilities.
• Ability to work both independently and as part of a team.
• Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint).
• Willingness to work flexible hours, including evenings and weekends as needed to support events.

Job Description:

• Competent in reading and understanding drawings and perform measurements.
• Competent in preparing Bills of Quantities.
• Competent in understanding tender/contract/document/specifications/terms of contract
• Competent in analysing quotations/prices/rates, build-up rates and perform pricing
• Competent in performing contract administration including but not limiting to valuation of payments and variations claims in accordance to contract requirements
• Competent in performing all tender activities necessary for the procurement of new projects
• Competent in performing any other activities in connection with the businesses of the holding company
• Competent in working independently as well as with a team
• Participate in any activity ancillary to the company's other objectives e.g. charity events
• Competent in completing required obligations within stipulated timings and other constraints

Job Requirements:

• Bachelor's Degree in Quantity Surveying
• Minimum 3 years of working experience, preferably in the construction industry
• Proficient in Microsoft Office Tools

Job Description:

• Assisting with recruitment, posting job vacancies, reviewing job applications, arranging interviews with suitable candidates and conducting candidate reference checks.
• Supporting employee relations initiatives, assisting with employee conflict resolution and daily communication between the HR department and the organisation's various teams.
• Assisting in the preparation of HR documents, such as employment contracts, HR policies and employee handbooks.
• Collating and updating new employee records.
• Maintaining employee records and ensuring data is accurate and up to date
• Supporting the HR department in administrative tasks, such as employee data entry and data filing.
• Assisting with payroll preparation by tracking relevant employee data, such as performance reviews and feedback.

• Analyze blueprints, sketches, or verbal directions to determine the required quantity, dimensions, placement, and configuration of reinforcing rods.
• Examine blueprints or project specifications to fully understand the scope and requirements.
• Arrange and securely fasten reinforcing rods within forms following blueprint specifications, utilizing wire and pliers.
• Set up fencing or protective barriers as necessary.
• Precisely position structural elements in their designated locations.
• Secure steel bars, rods, cables, or mesh within concrete forms using appropriate tools, such as fasteners, rod-bending machines, blowtorches, or hand tools.
• Accurately install metal structural components.
• Cut reinforcing rods to the specified lengths using metal shears, hacksaws, bar cutters, or acetylene torches.
• Prepare metal components by cutting them to match required specifications.
• Place blocks beneath rebar to elevate it above the deck, ensuring proper floor reinforcement.
• Install safety and support equipment as needed to maintain structural integrity.

Job Description:

• Ensure the quality of all construction work performed on site are in accordance with the company's QAQC requirement.
• Visit project sites, arrange and conduct QAQC inspections on mainly Structural Works and Architectural Works.
• Ensure workmanship, procedures and method statements are in accordance to specified standards.
• Ensure that all project quality records and quality audit plans are maintained.
• Any other duties as assigned.
• Perform all duties in accordance with CCCC policies, processes, systems and procedures.

Job Requirement:

• Candidate must possess Diploma/Bachelor Degree in relevant discipline
• Minimum 8 years of experience in procurement preferably I construction/ civil engineering industry.
• Preferably Senior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.
• Have experiences in working in large scale projects.
• 5.5Days work per week.
• Location: Lentor

-Monitor, coordinate and keep track of site progress with internals and externals to ensure all work is carried out according to specifications and schedule

-Ensure compliance with WSH Regulations

-Able to read construction drawings, skilled in reinforcement concreting works, tiling, plastering, and other related finishing work on site

-Supervise the related construction activities at the site

Job Requirements:

-Candidates must possess at least a Primary/Secondary/”O” Level, Higher Secondary/College, Professional Certificate/Nitec in any field

-At least 1 years of working experience in a related field

Responsibilities:

• Work out schedule for shop drawing preparation/approval and material approval/procurement based on master programme and monitor the status.
• Supervise BIM modeler to produce Structural & Architectural shop drawings and obtain Consultant’s approval.
• Review, coordinate, and liaise with Consultants and Subcontractors to develop the Construction details for Structural & Architectural works and the interface to other work trades.
• Ensure compliance with construction drawings, project specifications, client needs and regulations, and authorities' codes and standards.
• Verify site installation according to approved shop drawings and finalise as-built drawings

Requirements

• Master’s degree in civil engineering and/or Architecture
• Minimum 4 years’ experience in technical coordination and/or site supervision in mixed development projects
• Experience in RC structure and Steel structure Building projects.
• Experience in Building projects requiring Top-Down or Semi Top-Down method and Deep Excavation, more than 15m depth.
• Experience in coordination and/or supervision of Structural and Architectural works.

• Maintains project administration in a correct and timely manner.
• Orders materials and equipment and takes care of the necessary permits.
• Accomplishes construction human resource objectives by selecting, orienting, and training employees.
• Assesses safety and finance goals.
• Manages sub-contractors by locating, evaluating, and selecting contractors.
• Meets operational standards by contributing construction information to strategic plans and reviews.
• Meets construction budget by monitoring project expenditures.
• Accomplishes construction project results by defining project purpose and scope.
• Approves construction projects by conducting inspections at critical phases.
• Prevents fines and work interruptions by complying with, and enforcing, codes.
• Maintains a safe, secure, and healthy work environment by following guidelines, standards, and procedures.

Job Description

• Work with project team to produce shopdrawings, coordination drawings and as-built drawings on Structural, Architectural and MEP aspects ;
• Maintaining and update the complete set of project drawings.

Job Requirement

• Proficient in operating BIM software with Auto cad/Revit/Tekla;
• Minimum 5 years of experience working as BIM Coordinator (Preferably with A1 Main Contractor)

Job Description & Requirements

Duties & Responsibilities

• Good knowledge of contract and QS procedures and pricing.

• Experienced in procurement, budgeting, estimation, contract administration, measurement of quantities & variation orders

• Compile photos, inspection forms and all relevant documents required for VOs attachment.

• Strong interpersonal, communication & negotiation skills

• Prepare tender documents, contracts, budgets, bills of quantities and other documentation

• Any other ad-hoc tasks assigned by Superior.

Requirement

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Civil), Quantity Survey or equivalent.

• 05 years of relevant working experience (QS)

• Demonstrate proficiency and competency in a project QS function and can work independently.

Job Description:

• Managing the design and coordination of a team of M&E coordinators, Engineers, and BIM modellers.
• Liase with consultants on matters relating to all M&E works.
• Participate in technical meetings and site meetings.
• To assess and resolve any technical or site issues related to M&E drawings and M&E work with consultants and subcontractors
• On-site supervision of work progress
• Maintaining schedules and coordinating the work of subcontractors.
• Assist in finalising accounts of MYE Sub-contractors.

Job Requirements:

• Degree or Diploma in Engineering or Construction related degree
• At least eight (8) years of relevant experience as M&E Manager in large scale projects is an advantage
• Highly motivated, independent, initiative and responsible.
• Great communication and interpersonal skills.

Job Responsibilities:

• Pre-tender & tender duties,
• Prepare BQ, tender pricing and documents costs estimation, planning, life cycle costing, and quantity take off
• Liaise with owner, developers, consultants, and sub-contractors
• Prepare and submit interim progress claims and variation claims
• Procurement of contractors and suppliers
• Valuation and assessment of payment claims by sub-contractors
• Prepare, negotiate, and agree final accounts
• Review Contract Documents and identify irregularities
• Any other ad hoc duties assigned by the manager/director

Job Requirement :

• Candidate must possess at least a Quantity Surveyor / Civil Engineering diploma or equivalent.
• Minimum 1 year of quantity surveyor experience in building construction projects
• Candidate who has experience in bungalows or semi-detached houses would be preferred
• Experience in the main construction industry
• Kindly indicate your Current Salary, Expected Salary & Notice Period for further evaluation

• Conduct physical inspections of containers during gate-in and gate-out processes.
• Capture photographs of containers as needed for documentation purposes.
• Assess the extent of damages, recommend appropriate repair methods, and prepare relevant repair documentation.
• Coordinate and communicate with customers regarding container damages.
• Assist in joint container inspections with external stakeholders.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

Job Responsibilities:

• Responsible for submission of progress claims ;
• Assist the Project Manager on contractual matters and variation claims ;
• Assist the Project Manager to request for quotation and prepare cost comparison ;
• Liaise with Consultants on contract matters ;
• Assessment of sub-contractor's claim ;
• Responsible in the working out of final accounts ;

Job Requirements:

• Degree / Diploma in Quantity Surveying or construction related degree

Job Description:

• Lead and guide sub-contractor to achieve quality workmanship
• Handle paperworks , defects issuance and reporting
• Conduct defects investigation and identification

Job Requirements:

• Minimum 4 years in CONQUAS
• Possess at least 2 good industry practices certificates
• Microsoft office knowledge
• Able to communicate with client and consultant

• Ensuring teams work together to deliver quality work to strict deadlines.
• Monitoring construction processes, and providing training and team building sessions are required.
• Ensuring adherence to health and safety regulations at all times.
• Performing equipment, material, and routine site inspections.
• Scheduling regular meetings with vendors, site inspectors, managers, and staff.
• Writing up reports, budgets, project plans, and presenting them to relevant stakeholders.
• Working closely with architects and other professionals.
• Staying up-to-date with safety codes and advancements in construction.
• Assisting with the recruitment and training of new staff.
• Processing paperwork and traveling to multiple sites as required.

Requirements:

More than 10 years Construction Supervisor experience.

Can write and speak in Chinese & English.

Job Specifications:

• Assist in tendering process
• Liaise with main-con, supplier & other parties involved in the project
• Prepare award of contract, bills of quantities and other contract related documents

Educational Qualifications:

• Degree / Diploma in Quantity Surveying or Equivalent

Job Requirements:

• Fresh Graduates Welcome
• Working hours: 0830 - 1730 (Mon - Fri) / 0830 - 1230 (Sat)

1. Primary Responsibilities

• Project Maintenance Management: Oversee maintenance teams’ tasks across multiple project sites, ensuring timely, cost-effective, and quality service.
• Scheduling & Planning: Develop, schedule, and rectification procedure and ensure timely repairs.
• Budgeting & Cost Control: Manage maintenance team expenditures and track expenses, and identify cost-saving measures.
• Quality Assurance: Ensure maintenance team meets industry standards, client requirements, and conmpany’s quality guidelines.
• Risk & Compliance: Ensure adherence to safety protocols, compliance with regulatory and company standards, and mitigate risk on project sites.
• Client Liaison: Act as the primary contact for clients and consultants concerning maintenance and defect rectification.
• Vendor & Supplier Coordination: Manage relationships with suppliers, negotiate service contracts, and ensure materials meet project specifications.

2. Leadership and Team Management

• Team Supervision: Lead and manage maintenance staff, including training, scheduling, and performance evaluations.
• Training & Development: Ensure that maintenance personnel are trained in safety procedures, equipment handling, and troubleshooting.
• Performance Monitoring: Regularly assess team performance, address any gaps, and promote staff development and skill enhancement.

3. Technical Skills and Knowledge

• Technical Knowledge: Deep understanding of construction technology and method used in the industry and expertise in their maintenance and preventive requirements.
• Problem Solving: Diagnose and resolve maintenance issues efficiently to minimize inconvenience to client.
• Safety Standards: Strong knowledge of workplace safety and health regulations, particularly in construction site.
• Software Proficiency: Familiarity with relevant software for planning and record-keeping.

4. Reporting & Documentation

• Maintain accurate records of maintenance activities, including work orders, inspection reports, and incident logs.
• Provide regular updates and detailed reports to management and clients on equipment performance, maintenance costs, and any challenges.

5. Qualifications

• Education: Degree in engineering, facilities management, or related field.
• Experience: At least 7-10 years of experience in a maintenance role, with prior leadership experience preferred.
• Skills: Strong communication, negotiation, and project management skills.

6. Key Competencies

• Analytical Thinking: Ability to assess needs and identify areas for improvement.
• Attention to Detail: Precision in inspection, rectification procedures, and adherence to protocols.
• Time Management: Efficiently prioritize tasks and manage resources to meet deadlines.
• Adaptability: Ability to handle unexpected challenges and adjust maintenance plans as needed.

Responsibilities:

• Prepare detailed cost breakdown as per the scope including detailed material take off, activity wise resource requirements, subcontractors, indirect costs, etc
• Communicate with purchase dept & suppliers to get competitive quote for materials by negotiation
• Liaise with internal departments (Sales, QA/QC, Production and Purchase) to collect project information & data
• Prepare technical proposal including statement with estimated cost in time.

Requirements:

• Diploma or Degree in Mechanical Engineering or related discipline, with minimum 2 years’ cost estimation experience in the Oil and Gas, Petrochemical/Chemical industries, handling similar products is an advantage
• Experience in preparing proposals/tendering preferred
• Fresh graduates are also welcome to apply
• Good application knowledge of MS Office
• Strong communication and negotiation skills
• Only Singaporeans or Singapore PR need to apply

Responsible for site activities, coordination and supervision works related to engineering and systems design.

Coordinate with clients, architects, sub-contractors, and other relevant authorities Plan and ensure M&E works are completed in line with Master Programme and micro-schedule.

Monitor and ensure all M&E works are carried out in accordance with drawings, specifications and Authority codes. Handle any other ad-hoc duties and tasks assigned.

Requirements Degree/Diploma in Mechanical Engineering recognised by Singapore

Professional Engineers Board (PEB) in Civil Engineering or equivalent with 3 to 5 years of working experience in the construction industry.

Required Skill(s): Autocad, Microsoft Office

Assist in preparation and submission of tender quotations and ensure timeline are met for every tender.

Quantity take-off for all the tenders, in the form of manual measurement and update the amendment changes of the tender

During tender stages, sourcing of quotation for rates and technical data are required due to every project’s requirement varies.

Arrange and carry out tender interview, negotiate of price with suppliers and subcontractors including of preparation of sub-contract agreement / letter of award.

Monitoring progress claims and payments, sub-contractors payment, certification, VO submission and final accounts

Assist in the settlement of final accounts with client, suppliers and subcontractors

Job Requirements:

Minimum Diploma in Civil Engineering / Building / Quantity Surveying or equivalent

Minimum 3 years of relevant work experience in construction industry

Proficient in MS Office and other Measurement Software