Job description

• Manage, initiate, and assign workers and equipment schedules and activities.
• Allocating work to workers, setting production targets and communicating precise instructions.
• Effective employee relations.
• Respond to employee concerns promptly and work with Management to resolve.
• Monitor and initiate training activities in their department and all related documentation.
• Ensure all works are perform in safe manner and environment.
• Participate in meetings.
• Conduct periodic workers appraisal to Management.
• Perform daily safety inspections.
• Achieve tasks as assigned by Management.
• To resolve construction discrepancies.
• Plan workers rest days and leave to suit construction schedule.
• Change work assignments and schedules to maintain and improve efficiency as and when necessary.

Requirements

• Ability to grasp knowledge to drawings, specifications and requirements to ensure all works completed by workers.
• Ability to identify structures/ architectural and locate dimensions in scale drawings and requirements.
• Possess good communication skills to communicate with Main Contractor, Managers and Supervisors and other trades to explain progress of jobs and to obtain instructions and tasks.
• Possess coaching skills to train employees and less experienced workers to perform tasks as prescribe by Management.
• Organize and lead meetings with workers.
• Coordinate job tasks with those of junior workers, co-workers, Main Contractors and Sub Contractors.
• Work to achieve Management KPI.
• Ability to operate and troubleshoot equipment.
• Continuous learning to keep up with new technologies, new products, new information and regulatory changes within industry.
• Knowledge of applicable site and safety requirements.

Ensure compliance of operations with Workplace Safety and Health/Environmental Control regulations and statutory requirements

Follow up with the committee site walk inspection findings for WSH Officer to close up the report and assisting WSH Officer on incident/accident investigation.

Responsible for daily checklists are properly documented and carry out mass toolbox meeting once a week.

Coordination with relevant site in-charge on improving the worksite safety and cleanliness.

Ensure supervisors and workers are following safe work procedures compliance.

Assist WSHO to organize monthly Safety Committee meetings and put up safety reports, including safety issues

Compiles all relevant reports and records and carry out daily safety inspection

Supervise all workers in providing safety measures and procedures in accordance with MOM Regulations

Any other ad-hoc duties assigned by superior from time to time

• Coordinate and supervision of structural technical aspects of construction Supervise site building works
• Liaise with Consultants, Sub-contractors
• Handle any other ad-hoc duties and tasks assigned
• At least 5 years experience in Construction
• Know rebar and timberform work and can read drawing

JOB DESCRIPTION :

•Assist in BIM coordination offsite and onsite implementation.

•To produce effective model to meet site needs

•Produce the details shop drawing through the BIM model for site implementation.

Requirements:

•Diploma

•At least 2 years working experience in coordinate discipline of Architectural, Structural or M&E.

•Have good knowledge for Architectural, Structural or M&E and proficiency of multiple software platforms (Revit, Navisworks)

Job Description

• Support and carry out the Accounts payable function
• Data entry for all the accounts payable invoices and payment voucher, journal entries into accounting system
• Matching of DO, PO with supplier invoices for payment
• AP reconciliation reports to suppliers' statement
• Prepare AP ageing reports
• Close month end accounts
• ISO compliance documentation
• Other duties as assigned by the departmental manager

Job Requirements

• Minimum Diploma in Accounting or equivalent
• At least one year of relevant working experience

Senior Quantity Surveyor Engineer / Assistant Manager (Quantity Surveyor) – Electrical [3770]

Work Location: Outram Road (Near to Havelock Mrt)
Working Days: 5 Days (Mon-Fri)
Working Hours: 8.30am to 5.30pm
Salary range: $4500 - $5000

Job Description

• To handle and calculate the quantity and costing of the different tender assignment. Technical review on the supplier/contractor quotation or proposal and make sure that all requirements are complied.
• Familiar and able to understand general contracts and various documents.
• Able to provide budget cost or estimates as per instruction.
• Liaise with suppliers for their products and services presentation.
• Able to design and look for solution regarding any technical problems during tender.
• Able to communicate with other Departments in dealing with various documents and issues.
• Coordinate with the supplier/contractor regarding follow up on bills and quantities.
• To evaluate and check on market unit rates monthly /quarterly for material and labour cost.
• To handover all tender document and costing to project team once the tender is awarded.
• To attend site show round for those tender that we are interested.
• To reply tender clarification, preparation for tender interview and presentation.

Requirement

• Diploma or Degree in Electrical Engineering
• Work as Quantity Surveyor for at least 5 to 8 years’ experience
• Experience in an M&E sub-contractor environment will be preferred.

WhatsApp: +65 82026403

Email: [email protected]

14C7279 The Supreme HR Advisory Pte Ltd

R21103770 Chu Jenn Anne

JOB DESCRIPTION :

•Assist in BIM coordination offsite and onsite implementation.

•To produce effective model to meet site needs

•Produce the details shop drawing through the BIM model for site implementation.

Requirements:

•Diploma

•At least 2 years working experience in coordinate discipline of Architectural, Structural or M&E.

•Have good knowledge for Architectural, Structural or M&E and proficiency of multiple software platforms (Revit, Navisworks)

The Qualifications:

• A diploma in Mechanical & Electrical or equivalent qualification.
• Mechanical & Electrical Coordination certificate from BCA
• A relevant Advanced Certificate / Higher NITEC / Advanced NBQ with 2 to 3 years of relevant work experience.
• A relevant certificate with 4 to 5 years of relevant work experience.
• NITEC / Higher NBQ with at least 5 years of relevant work experience12.

Duties and Responsibilities:

1. Assist the Project Manager to plan, monitor and control daily works at the project sites, able to read and drawing M&E drawing by using AutoCAD.

2. Implement all policies, activities, procedures, instructions as relevant and required by the QESH management system.

3. Comply with client and applicable legal and other requirements.

4. Implement plan actions from risks and opportunities assessment.

5. Take responsibility for prevention of work-related injury and ill health.

6. Ensure that project operations and document control procedures are adhered to.

7. Plan, coordinate and monitor M&E subcontractor’s activities at project sites.

8. Maintain good house-keeping and implement safety practices.

9. Ensure that all M&E works carried out are in accordance to the drawings, specifications, construction plan, procedures, work instructions, etc.

10. Ensure that inspection and tests are carried out as per Inspection and Test Plans, quality control mechanisms are being used and results are conformed to specifications.

11. Submit sample materials and calibration certificates to consultants for approval.

12. Undertake any and all other duties and responsibilities as so instructed by the superior.

13. Accountable for the quality, safety, health and environmental management and performance at the project site.

The skills required for an M&E Coordinator position:

• Analytical skills: The ability to analyze data and information to identify patterns, trends, and insights.
• Communication skills: The ability to communicate effectively with stakeholders, including project staff, partners, and donors.
• Project management skills: The ability to manage projects, including planning, implementation, monitoring, and evaluation.
• Research skills: The ability to conduct research, including designing research studies, collecting and analyzing data, and presenting findings.
• Technical skills: The ability to use software and tools for data collection, analysis, and reporting.

• Remuneration package: Up to SGD$2,800 Basic + Variable Bonus
• Singapore Construction project
• Location: Ubi
• 5.5 Days office hour, Alternate Saturday

Responsibilities

• Planning and coordinating Public Relation programme for the project
• Handle enquiries and feedback pertaining to the project and work closely with the relevant parties, such as residents, consultants, authorities, etc.
• Take proactive measures to mitigate complaints arising from the construction activities
• Ensure site employment complies with statutory regulations and company policies
• Dealing with requests and complaints from the public
• Overall in-charge and responsible for the internal and external publication and communication issue
• Working closely with all contractors and taking proactive measures to mitigate all complaints arising from the construction activities
• Filing and maintaining up-to-date file records to enable quick retrieval
• Provide administrative support assistance and other ad-hoc jobs if required

Job Requirements

• GCE 'O'/'A' Level with 1 to 2 years of public relations experience, preferably in building trade as BSC supervisor
• Proficient with MS Office and MS Excel
• Good communication and interpersonal skills

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits

We regret that only shortlisted candidates will be notified

People Profilers Pte Ltd

20 Cecil Street, #08-09 PLUS Building Singapore 049705

EA License Number: 02C4944

Registration Number: R23114519

Posting Personnel: Lin Pei Yu

REF: L47RY767

Job Description & Requirements

The Deputy Manager shall support to the Corporate Safety Department in developing, implementing, and overseeing the Safety, Health, and Environment Management System (SHEMS) across project sites. This role involves ensuring compliance with safety, health, and environmental regulations, codes, and standards, as well as promoting a culture of safety excellence across all projects. The Deputy Manager will oversee and provide guidance to Project WSHE officers.

Key Responsibilities:

SHEMS GOVERNANCE AND OVERSIGHT

• Conduct regular site inspections to ensure compliance with relevant legislations, codes, and regulations.
• Monitor and evaluate the effectiveness of SHEMS implementation and implement improvements as needed.
• Work closely with the Corporate Safety Manager to assist in implementing Management HSE strategies and Directives across project sites.

COMPLIANCE AND ASSURANCE

• Provide guidance and oversee site operations to ensure that all projects, activities, and operations are aligned with health, safety, and environmental laws and regulations.
• Ensure adherence to corporate policies and procedures related to safety, health, and the environment.
• Drive the adoption of best practices to maintain compliance and foster a culture of safety excellence.

Job Requirements:

• Degree in Workplace Safety & Health or its equivalent from a recognized institution
• Registered Workplace Safety & Health Officer (WSHO)
• Registered Environment Control Officer (ECO)
• Minimum 3 years of relevant workplace safety and health practicing experiences (Preferably in Statutory Boards projects)
• Self-starter, driven, ethical

Job Description:

• Request quotation and price negotiation with suppliers.
• Prepare purchase order, ensure timely delivery and follow through the complete procurement cycle.
• Responsible for construction material / machinery purchase and to maintain with proper record for receipts and issuance.
• Matching of supplier’s invoices with supporting documents such as PR, PO & DO.
• Maintain up to date prices from suppliers.

Job Requirement:

• Minimum GCE 'O' Level.
• At least 2 years of relevant working experience
• Preferably experience in Construction Industry

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

JOB DESCRIPTION

Report to Project Manager / Site Manager for the Arrangement of work

Liaise with consultants for the submission and approval of materials and shop drawings

Responsible for planning, programming and monitoring of work progress on site Co-ordinate the inspection work by Resident Engineer and clerk of works

Handling technical and engineering problems on site

Ensure site safety and proper execution of site work procedure on site

Monitor and co-ordinate the works of subcontractors Structure and Architectural work

Requirements:

Civil Engineer preferably registered with PE Board

Min 3-4 years’ experience

Delivery of surplus excavated soil or earth from various project site to approved dumping site to follows safety measurement

JOB DESCRIPTION

Assist PM in preparation of Master Programme, Project Quality Plan, Materials/ works Quality Plan and applicable standard work method

Assist in the issuing of drawings/ part plans to sub-contractors

REQUIREMENTS

Candidate must possess at least Diploma/Advanced/Higher/Graduate Diploma in Engineering (Civil) or equivalent. At least 2 Year(s) of working experience in the related field is required for this position.

JOB DESCRIPTION

Assist PM in preparation of Master Programme, Project Quality Plan, Materials/ works Quality Plan and applicable standard work method

Assist in the issuing of drawings/ part plans to sub-contractors

REQUIREMENTS

Candidate must possess at least Diploma/Advanced/Higher/Graduate Diploma in Engineering (Civil) or equivalent. At least 1 Year(s) of working experience in the related field is required for this position.

Responsibilities:

• Tabulate quantities, estimate cost and request for quotation
• Knowledge of electrical products and costings
• Updating contract documents, drawings, and correspondences
• Submission of progress claims and site valuations
• Preparation of Variation Order for submission
• Liaise with subcontractors and clients
• Ensure the timely completion of a given tender assignment

Requirements:

• Candidates must possess at least Diploma/Degree in Quantity Surveyor or Engineering or equivalent
• Minimum 1 years of QS experience
• Computer skills – Microsoft office skill (Excel, Words. AutoCAD, etc.)
• Must be able to communicate in English
• Independent, resourceful, pro-active and responsible
• Able to work under a tight timeline
• Must be a team player

Benefits

• 14 Days Annual Leave
• 14 Days MC
• AWS + PB (Depends of yearly Business)
• Yearly Entertainment Allowance
• Company Trip
• Company Activities

1. JOB DESCRIPTION

Job Description & Requirements

REQUIREMENTS:

• Possess a valid Class 3 driving license
• Good driving record with no major traffic violations
• Can communicate in Chinese and simple English
• Able to work independently and a good team player with initiative
• Individuals of senior age who are physically fit are invited to apply.

OTHERS INFORMATION:

• Site Location: To be discussed as few sites available
• Type of Vehicle: Pickup
• Benefits: Annual Leave, Sick Leave, Medical Claim, CPF Contribution

Interested candidates, please contact us at 6560 7788 or 9621 9017.

Description :

• To prepare and submit materials and shop drawings to consultants for approval.
• To control and coordinate M&E Works on site
• To resolve site matters with regards to M&E services
• To manage sub-contractors works and progress of works
• To liaise with authorities for the commission of work

Requirements:

• Passed M&E coordination course.
• Possess at least 2-3 years of relevant working experience in M&E industry
• Proficiency in Microsoft office (Word & Excel), Microsoft Project and Autocad.

Job Descriptions:

• Carry out land and engineering surveys required for the construction projects, site boundaries or land titles.
• Survey, establish demarcations and guide for construction to proceed.
• Check and compute the pre-computation prior to any setting out for field surveyors.
• Verify accuracy of survey data, measurement, and calculations.
• Ensure correctness of build-up according to construction plans and drawing.
• To coordinate with engineering team to prepare engineering drawings and sketches.
• Design drawings including layouts, elevations and details.
• To provide drawing modifications and advice on altering design changes to suit site condition under the guidance of Engineers.
• Assist to supervise and lead the survey team for handling all survey related issues.
• Able to provide design and shop drawings under the guidance of Engineers.
• Able to provide advices on altering design changes to suit site condition.

Job Requirements:

• Degree/ Diploma in Civil / Structural / Land Surveying or Equivalent.
• Minimum 4 year(s) of working experience in the civil and building projects.
• Experience in Marine Project will be an advantage.
• Proficient in AutoCAD, Revit & Civil 3D BIM application.

. Supervises, assigns, and coordinates the work activities of subordinates.

· Plans and develops work schedules, equipment usage schedules, priority of plumbing expenditures, and procedures for plumbing systems maintenance.

· Estimates material and labor.

· Monitors the acquisition and use of materials.

· Maintains time and material records and submits reports as required.

· Trains or informs employees of new work methods or procedures, changes in safety regulations, work policies

. Candidate must possess at least 3 years relevant experience and knowledge in construction work

Quantity Surveyor/Senior Quantity Surveyor - Ubi / Up to $6500 [3770]

• Working location: Ubi
• Working Hour – Monday to Friday – 0830 am to 1730 pm, 1 Saturday 0830 am to 1230 pm
• Salary range: $3500 - $4500 (Junior) / $4000 - $6500 (Senior)

Requirements:

• Min Degree / Diploma in Building or its equivalent
• At least 3 years and above of QS experience in main-con companies
• Proven ability in contract negotiation, contract administration & variation orders

Roles & Responsibilities
Responsibility:

• Prepare and analyze cost comparison
• Obtaining quotations, liaising and negotiate with sub-contractors and suppliers
• Responsible for measuring quantities and taking off
• Prepare Variation Orders, claims, final accounts, settlement and sub-contractor payments
• All other QS related job

WhatsApp: +65 82026403

Email: [email protected]

14C7279 The Supreme HR Advisory Pte Ltd

R21103770 Chu Jenn Anne

• Ensure to achieve Company’s targeted yearly turnover.
• Ensures timely kick-off and proper handing-over of newly secured projects.
• Participates in project budget reviews and provide advice when required.
• Liaises with relevant parties to ensure all project disputes/ clarifications are settled.
• Attend site meeting, liaise with clients, subcontractors and suppliers and to ensure proper documentation. Sources, identify and secure new business opportunities for the Company.
• Ensuring all contractual requirements of all projects are fully complied with and responding to all contractual matters involving cost and time implications.
• Preparing tender documents and quantities, providing cost estimates, evaluating tender proposals, conducting project feasibility studies and managing cost information for all projects Assist on any contractual issues with client, subcontractor and consultants.
• Negotiate commercial terms conditions for new and existing contracts
• Involve project budgeting, controlling of cash flow and cost, processing of claims, contract payments and settlement of final accounts as well as maintaining proper documentation
• previous experience with façade would be advantage.
• Candidate must possess at least a Diploma, Professional Degree, Quantity Survey, Civil Engineering or equivalent.
• Able to speak English and Chinese.
• Required skill(s): AutoCad.
• Applicants must be willing to work in Gul Circle. 5.5workweek.

Main contractor doing Infra work seeking for Quantity Surveyor:-

5 days work per week

Job Duties:-

• Pre & Post contract
• Qty taking off
• Preparation of progress claim
• Final account qty check and submission
• Monitor construction cost within budget
• Contract issue and negogiation
• Preparing tender and contract documents,
• Carry out cost analysis, monitoring cost variations and report
• Ad hoc duties by Contract Manager

Requirement:-

• Minimum Degree holder
• Minimum 3years experience (Prefer in Infra/civil Project)
• Able to work as a team
• Responsible, detail & careful Attitude
• Good in microsoft office

Good communication and negociation power is an advantage

Job Description & Requirements

Site Engineer to ensure that work is done according to clients' and regulatory requirements in timely manner.

Roles & Responsibilities

• Coordination of work with clients/subcontractors to ensure on-time completion, attend site project meetings and produce daily work progress reports
• Planning, scheduling and supervision of execution of site works
• To prepare method of statements and risk assessment for all activities
• To review construction methods put forth by sub-contractors or foremen and then proposed to consultant for approval prior to construction.
• Ensure safety regulations at construction site are strictly followed
• Provide technical advice and supervision to site personnel to ensure that work on site is carried out according to specifications and requirements
• Identify any discrepancies in drawings and resolve it promptly
• Willing to travel island-wide to work sites
• Other ad-hoc duties as assigned by Project Manager
• class 3 driving license is preferred
• Diploma/Degree holder in Construction / Building / Civil Structural / Architectural / M&E Engineering or related discipline
• Familarity With AutoCAD and Microsoft Office
• Able to read and interpret Architectural, Structural, shop and related drawings