• Troubleshoot and carry out minor repairs (electrical, plumbing, builder, etc) for the building and related facilities.
• Supervise sub-contractors who carry out approved repair works and scheduled maintenance in the building.
• Assist Facilities Executive & officer to execute preventive maintenance regime and/or ad-hoc upgrading project and monitor the work progress.
• Assist Facilities Executive & officer to attend to tenant’s feedback on the building and related facilities.
• Provide guidance and coaching to junior staff when required.

• Troubleshoot and carry out minor repairs (electrical, plumbing, builder, etc) for the building and related facilities.
• Supervise sub-contractors who carry out approved repair works and scheduled maintenance in the building.
• Assist Facilities Executive & officer to execute preventive maintenance regime and/or ad-hoc upgrading project and monitor the work progress.
• Assist Facilities Executive & officer to attend to tenant’s feedback on the building and related facilities.
• Provide guidance and coaching to junior staff when required.

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

*Candidate must possess at least Diploma/Advanced/Higher/Graduate Diploma in Business.

*Studies/Administration/Management, Finance/Accountancy/Banking, Human Resource Management or equivalent.

*At least 3 Year(s) of working experience in the related field is required for this position.

*Required Skill(s): Proficient in MYOB, Proficient in MS Office, Good Communication Skill, Good Writing Skill.

*Preferably Junior Executive specialized in Finance - General/Cost Accounting or equivalent.

* You will be allocated in Tuas office.

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

a) Administrative function such as data entry, typing, faxing, filling, attending to telephone calls, managing email account & etc.

b) In addition to the duties specified above, you are obliged to follow all reasonable instructions of the Employer, the management of the Employer, or the designated superior.

c) The Employee shall not be entitled to do any private work whatsoever or be a party thereto without the written approval if the Employer I fit interferes with his employment with the Employer or the proper and diligent execution of duties.

d) You will be allocated in Tuas Office.

• Lead strategic planning and day-to-day operations, particularly in relation to buildings and premises by engaging vendor services and maintain their performance.
• Monitor the operations of an organization’s security outfit to ensure effectual performance of duties.
• Ensure the work environment of an organization complies with set health and safety requirements.
• Oversee general staff safety by minimizing exposure to hazards and unsafe conditions.
• Supervise the renovation and repair of damaged building components to ensure proper refurbishing
• Hire and supervise the activities of contractors to ensure they carry out their job responsibilities
• Oversee the management and allocation of space in a building premises.
• Conduct surveys to identify building availability and suitability for lease.
• Carry out financial forecasts to predict potential business opportunities for a company.
• Utilize performance management systems to monitor and determine level of productivity and achievement of set goals.
• Analyze costs of production/supply to identify way to reduce expenses and maximize profits.
• Prepare and manage budgets to achieve set targets and objectives.
• Respond appropriately to emergencies or solve urgent issues arise within manufacturing plant and office building premises in relation to soft and hard facilities management.
• Maintain accurate record of all relevant financial and non-financial details
• Conduct negotiations with vendors and clients to establish the terms, conditions and price of contract services.
• Review operational costs to make appropriate expense adjustments necessary for optimal running of a business.

• Lead strategic planning and day-to-day operations, particularly in relation to buildings and premises by engaging vendor services and maintain their performance.
• Monitor the operations of an organization’s security outfit to ensure effectual performance of duties.
• Ensure the work environment of an organization complies with set health and safety requirements.
• Oversee general staff safety by minimizing exposure to hazards and unsafe conditions.
• Supervise the renovation and repair of damaged building components to ensure proper refurbishing
• Hire and supervise the activities of contractors to ensure they carry out their job responsibilities
• Oversee the management and allocation of space in a building premises.
• Conduct surveys to identify building availability and suitability for lease.
• Carry out financial forecasts to predict potential business opportunities for a company.
• Utilize performance management systems to monitor and determine level of productivity and achievement of set goals.
• Analyze costs of production/supply to identify way to reduce expenses and maximize profits.
• Prepare and manage budgets to achieve set targets and objectives.
• Respond appropriately to emergencies or solve urgent issues arise within manufacturing plant and office building premises in relation to soft and hard facilities management.
• Maintain accurate record of all relevant financial and non-financial details
• Conduct negotiations with vendors and clients to establish the terms, conditions and price of contract services.
• Review operational costs to make appropriate expense adjustments necessary for optimal running of a business.

• Reviewing construction plans and preparing quantity requirements.
• Liaising with site managers, clients, contractors, and subcontractors.
• Scrutinizing maintenance and material costs, as well as contracts to ensure the best deals.
• Preparing reports, analyses, contracts, budgets, risk assessment, and other documents.
• Advising managers and clients on improvements and new strategies.
• Keeping track of materials and ordering more when required.
• Documenting any changes in design and updating budgets.
• Establishing and maintaining professional relationships with external and internal stakeholders.
• Liaise with Reporting Superior and Project Managers on costing and variation works including final account with Consultants
• Attendance of site meetings /site visit where necessary.
• Generally covering the scope of a Quantity Surveyor from Pre to Post contract Works (e.g. Tendering to final account).

• Lead strategic planning and day-to-day operations, particularly in relation to buildings and premises by engaging vendor services and maintain their performance.
• Monitor the operations of an organization’s security outfit to ensure effectual performance of duties.
• Ensure the work environment of an organization complies with set health and safety requirements.
• Oversee general staff safety by minimizing exposure to hazards and unsafe conditions.
• Supervise the renovation and repair of damaged building components to ensure proper refurbishing
• Hire and supervise the activities of contractors to ensure they carry out their job responsibilities
• Oversee the management and allocation of space in a building premises.
• Conduct surveys to identify building availability and suitability for lease.
• Carry out financial forecasts to predict potential business opportunities for a company.
• Utilize performance management systems to monitor and determine level of productivity and achievement of set goals.
• Analyze costs of production/supply to identify way to reduce expenses and maximize profits.
• Prepare and manage budgets to achieve set targets and objectives.
• Respond appropriately to emergencies or solve urgent issues arise within manufacturing plant and office building premises in relation to soft and hard facilities management.
• Maintain accurate record of all relevant financial and non-financial details
• Conduct negotiations with vendors and clients to establish the terms, conditions and price of contract services.
• Review operational costs to make appropriate expense adjustments necessary for optimal running of a business.

Job Summary

This incumbent is accountable for the completion of construction work in a timely and profitable manner consistent with project objectives and within budget.

He is overall responsible to oversee all construction activities with respect to schedule, performance, procedure, and making recommendations to Project Managers for improvements and corrective actions. He is also tasked to oversee the delivery and use of materials, tools, and equipment; and the quality of construction, staff productivity, and safety. He also oversees all sites’ HSSE Management and comply to local government and client HSSE regulations.

Duties & Responsibilities:

• Supervise sub-contractor and coordinate with various agencies.
• Manpower planning, deployment and control.
• Coordinate to resolve construction issues and manage schedule.
• Safety mind-set and able to develop RA and permit to work application.
• Good written and oral communication.
• Good interpersonal skill to deal with people at construction site.
• Prepare construction execution plan/ policies.
• Monitoring work schedule, progress, performance, etc.
• Conduct meetings.
• Initiate, and coordinate meetings with other disciplines.
• Approval of change in specifications or procedures.
• Prepare reports, handing over procedures/ closing out procedures, etc.
• Responsible for all problems solving on site.

Requirements:

• Bachelor’s Degree or equivalent.
• Minimum 8 to 15 years’ of relevant experience in construction field.
• Independently manage construction work in an operational plant (refinery).
• Accountable for the completion of construction work in a timely, profitable manner.
• Experience in oil and gas or chemical projects.
• Good knowledge and experience in construction planning and execution.

Interested parties, please send in your detailed resume.

• To supervise the work of sub-contractors and work closely with other operations staff to meet the project schedule
• Report to the Construction Manager
• You will adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship so as to meet the stringent requirement conducted during site tests and inspections
• Prepared and Assembled ready wooden cabinetry to drawings and specifications for installation.
• Verified dimensions and checked the quality and fit of pieces.
• Measured and marked dimensions of sites.
• Performed Cabinet assembly with the use of hand tools.
• Assisted with all aspects of the assembly team.
• Read detailed schematics for cabinets and executed assembly accurately.
• Helped with delivering and manually installing cabinets.
• Installed cabinets in residential homes.
• Minimum 3 years of relevant experience in the Construction Industry
• Possess a certificate in Building Construction Safety Supervisor (BCSS)
• Supervisory experience in foundation & structural works on site
• Able to work independently with a positive attitude

• Manage site activities, vendors and sub-contractors
• Attend meeting, coordination, prepare works schedule & site supervision
• Supervise construction and civil works on site.
• Review project specifications, technical clarifications, and construction drawings
• Carry out works scheduling, material requisition, cost control, project supervision, and documentation
• Ensure timely and smooth progress of works
• Responsible for all aspects of site safety

• To supervise the work of sub-contractors and work closely with other operations staff to meet the project schedule
• Report to the Construction Manager
• You will adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship so as to meet the stringent requirement conducted during site tests and inspections
• Prepared and Assembled ready wooden cabinetry to drawings and specifications for installation.
• Verified dimensions and checked the quality and fit of pieces.
• Measured and marked dimensions of sites.
• Performed Cabinet assembly with the use of hand tools.
• Assisted with all aspects of the assembly team.
• Read detailed schematics for cabinets and executed assembly accurately.
• Helped with delivering and manually installing cabinets.
• Installed cabinets in residential homes.
• Minimum 3 years of relevant experience in the Construction Industry
• Possess a certificate in Building Construction Safety Supervisor (BCSS)
• Supervisory experience in foundation & structural works on site
• Able to work independently with a positive attitude

• To supervise the work of sub-contractors and work closely with other operations staff to meet the project schedule
• Report to the Construction Manager
• You will adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship so as to meet the stringent requirement conducted during site tests and inspections
• Prepared and Assembled ready wooden cabinetry to drawings and specifications for installation.
• Verified dimensions and checked the quality and fit of pieces.
• Measured and marked dimensions of sites.
• Performed Cabinet assembly with the use of hand tools.
• Assisted with all aspects of the assembly team.
• Read detailed schematics for cabinets and executed assembly accurately.
• Helped with delivering and manually installing cabinets.
• Installed cabinets in residential homes.
• Minimum 3 years of relevant experience in the Construction Industry
• Possess a certificate in Building Construction Safety Supervisor (BCSS)
• Supervisory experience in foundation & structural works on site
• Able to work independently with a positive attitude

• To supervise the work of sub-contractors and work closely with other operations staff to meet the project schedule
• Report to the Construction Manager
• You will adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship so as to meet the stringent requirement conducted during site tests and inspections
• Prepared and Assembled ready wooden cabinetry to drawings and specifications for installation.
• Verified dimensions and checked the quality and fit of pieces.
• Measured and marked dimensions of sites.
• Performed Cabinet assembly with the use of hand tools.
• Assisted with all aspects of the assembly team.
• Read detailed schematics for cabinets and executed assembly accurately.
• Helped with delivering and manually installing cabinets.
• Installed cabinets in residential homes.
• Minimum 3 years of relevant experience in the Construction Industry
• Possess a certificate in Building Construction Safety Supervisor (BCSS)
• Supervisory experience in foundation & structural works on site
• Able to work independently with a positive attitude

Responsibilities

• Experience in pre & post contract administration
• Prepare tender cost submission / quantity take off / cost evaluation
• Source for subcontractors and suppliers

Requirements

• B.Sc / Diploma (Building/QS) or equivalent
• 2 or 3 years of related experience in Civil Engineering environment such as road, earth and external works.

1. Preparing, scheduling, coordinating and monitoring assigned projects works.

2. Coordination with clients, consultants, authorites, project team and sub-contractor for site work progress.

3. Performing quality control tasks on budgets, schedules, plans and personnel performance and reporting on the project's status.

4. Developing specifications for the project's needed equipment.

5. Reviewing the engineering tasks and initiating the necessary corrective actions.

6. Ensuring the project's compliance with the applicable codes, practices, policies, performance standards and specifications.

Responsibilities

• Responsible for the quality management of machined products to ensure that product quality
• Ensuring that our internal management systems are well defined and relevant in meeting international standards and customer requirements.
• Lead and monitor the QMS incl. ISO9001 & ISO 14001 quality system certification and promote continuous improvement.
• Lead the quality team to implement quality inspection and control and manage non-conforming products.
• Participate in supplier evaluation and management to ensure the quality of raw materials and purchased parts.

Requirement

• Minimum Bachelor Degree in Mechanical or Industrial Engineering
• At least 3 years of quality management experience in the machining industry
• Proficient in using office software and mintab statistical analysis software, and possessing Six Sigma quality management knowledge and skills, e.g. SPC tools & 8D reports.
• Strong knowledge and experience in leading ISO9001 & ISO 14001 quality system certification.
• Proficiency in English and Chinese, with the ability to communicate effectively with stakeholders in China.

Responsibilities:

• Accountable to maintain & monitor the schedule of equipment’s’ renewal as to fulfil the statutory requirements (e.g. Lifting gear)
• Responsible to raise the departmental purchase requisition for approval
• Handle and coordinates on the incoming and outgoing invoices and delivery orders
• Work with Logistic Assistant to cross check and confirm on the machinery movement for billing
• Perform data entry and ensure on the accuracy
• Maintain appropriate filling of documentations for easier retrieval
• Ensure the practices and procedures meet legal guidelines, and health and safety requirements
• Ensure safety practices and housekeeping are maintained to the highest standard
• Any other ad-hoc duties as and when assigned

Requirement:

• Diploma in Supply Chain Management / Business Administration or any other relevant field of studies
• 1 years relevant experience
• Computer skills and Microsoft Office

Other Information:

• Working hour: 5 days work week
• Company transport provided

Position Overview

We are seeking a skilled and detail-oriented Quantity Surveyor to join our team. The ideal candidate will play a critical role in preparing cost estimates, managing contracts, and ensuring the profitability of our facade construction projects. This position is integral to the success of project tenders and overall cost management.

Key Responsibilities

• Tender Preparation & Estimation: Analyze project requirements and prepare accurate cost estimates for facade construction projects.
  Study and evaluate architectural and engineering plans to identify materials, labor, and equipment needs.
  
• Contract Management:Review and draft contracts, ensuring compliance with legal and project requirements.
  Negotiate contract terms with clients, subcontractors, and suppliers to achieve optimal value.
  
• Cost Control & Reporting:Monitor project budgets and expenses to ensure alignment with initial estimates.
  Provide regular cost reports and updates to stakeholders.
  
• Supplier and Subcontractor Coordination:Source and negotiate with suppliers for materials and services.
  Evaluate subcontractor bids to determine the best value options.
  
• Risk Management:Identify and mitigate potential risks in cost and contract management.
  Maintain compliance with industry regulations and standards.
  

Qualifications and Skills

• Bachelor’s degree in Quantity Surveying, Civil Engineering, or a related field.
• Minimum of 3-5 years of experience in quantity surveying or estimating, preferably in facade construction or related industries.
• Proficiency in using cost estimation software and tools.
• Strong analytical and numerical skills with attention to detail.
• Excellent communication and negotiation skills.
• Knowledge of construction contracts, procurement processes, and legal regulations.
• Familiarity with facade systems and materials is a plus

-------------

Send me your resume via WhatsApp ❤

WhatsApp: (https://api.whatsapp.com/send?phone=6592377799)

I regret to share that only shortlisted candidates will be notified. www.dadaconsultants.com

EA Registration Number: R22108564

Data provided is for recruitment purposes only

Business Registration Number: 201735941W.

Licence Number: 18S9037

Job Description

About the Role
We are seeking an experienced and resourceful Business Development Director to drive client acquisition and business growth in the construction and real estate sectors. The ideal candidate will have a strong network across industries such as construction, real estate development, semi-government organizations, healthcare enterprises, and private projects. This role emphasizes stakeholder engagement, resource development, and bringing in high-value clients and partnerships.

Key Responsibilities

1. Client Acquisition & Partnership Development Identify and onboard high-value clients and partners from construction, real estate, and related industries.
   Leverage existing networks with government officials, retired or retiring officers, and senior executives from semi-government and healthcare enterprises to generate business opportunities.
   Cultivate relationships with influential individuals leading private projects and drive collaborations.
   
2. Resource Development & Utilization Facilitate the introduction of key resources and stakeholders to the company, enhancing project pipelines and capabilities.
   Bring in clients or partners with access to capital, resources, or market opportunities to contribute to organizational growth.
   
3. Strategic Business Expansion Drive the development and implementation of strategies to expand the company’s footprint in construction and real estate.
   Collaborate with semi-government agencies and healthcare institutions to explore public-private partnerships.
   
4. Management Trainee (MT) EngagementMentor and support Management Trainees, ensuring their integration into key projects and initiatives.
   Develop a structured leadership pipeline to support long-term organizational growth.
   
5. Market Insights & Competitive AnalysisStay informed about industry trends, regulatory changes, and emerging opportunities in construction and real estate.
   Provide strategic recommendations based on market insights to guide decision-making and planning.
   
6. Cross-Functional CollaborationWork closely with internal teams to align business development efforts with operational capabilities.
   Ensure smooth execution of client-related projects and maintain strong post-acquisition relationships.
   

Requirements

• Experience:Minimum 10 years in business development, client acquisition, or a related role within construction, real estate, or government sectors.
  Proven success in bringing in high-value clients and partnerships.
  
• Skills:Strong relationship-building skills with senior executives, government officials, and influential stakeholders.
  Exceptional negotiation and communication skills.
  Strategic thinking with a focus on results-driven execution.
  
• Education:Bachelor's or Master's degree in Business Administration, Construction Management, Real Estate, or a related field.
  

-------------

Send me your resume via WhatsApp ❤

WhatsApp: (https://api.whatsapp.com/send?phone=6592377799)

I regret to share that only shortlisted candidates will be notified. www.dadaconsultants.com

EA Registration Number: R22108564

Data provided is for recruitment purposes only

Business Registration Number: 201735941W.

Licence Number: 18S9037

Roles & Responsibilities

• Allocate general and daily responsibilities
• Supervise and train workers and tradespeople
• Ensure manpower and resources are adequate
• Guarantee all safety precautions and quality standards are met
• Supervise the use of machinery and equipment
• Monitor expenditure and ensure it remains within budget
• Resolve problems when they arise
• Report on progress to managers, engineers etc.
• Hire and collaborate with the construction workers and contractors needed to complete a job.
• Keep detailed records of expenses accrued throughout a project to ensure it remains within the set budget.
• Ensure the job site is a safe work environment and in compliance with all laws and regulations.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The job holders are to work with PI and the research team to process air quality data and study small-scale dispersion of airborne pollutants in urban environment.

Qualifications

One or more of (but not limited to) the following:

• Bachelor Degree in Engineering or relevant field
• Experiences of (small-scale) simulations of air pollutant dispersion, meteorology modelling, data processing
• Demonstrating as a fast learner of conducting literature study and literature summary
• Experiences of handling big data via R, Python, Matlab, etc.
• Experience with UNIX-based operating systems and bash script or similar
• Strong interests in applying machine learning models and applications to atmospheric research
• Proactive in assisting and contributing to quality scientific research publications
• Proficient in technical presentation, slide making, report writing, etc.
• Proven rounded and effective team player with strong initiative and ownership of the research project

AEDAS is a leading global design practice dedicated to creative excellence and diversity in the built environment. We are a global platform for the most talented architects and designers, focused upon delivering locally-celebrated solutions for cities, communities and clients. Our global network of 12 offices forms a diverse staff base with skills across all sectors in architecture, interior design, building consultancy, master planning, landscape and urban design.

To support our continuous growth and expansion in Asia, AEDAS Singapore is seeking a committed candidate for the following position:

DOCUMENT CONTROL ASSISTANT / DOCUMENT CONTROLLER

Responsibilities:

· To take direction from Document Control Manager

· To be able to work as a proactive team member

· Management & filing of all Project documentation (Outgoing & Incoming)

· Preparation of Document Issue Packages to meet Project stage deliverables as defined by the Project Team Leader

· Checking that all documents meet defined AEDAS standards before being transmitted, and to highlight non-compliances to team members responsible. i.e. File name & drawing nomenclature compliance (Checked against any earlier revisions).

· Maintenance of Electronic PDF in project folders reflecting:

o AEDAS “Current“ Documents (Drawings, Specifications, Reports)

o “Current” Documents from all other Consultants

o “Current” Documents from Contractors as Submission Packages documents

· Downloading, Internal distribution and eventually filing of contractor submissions

· Uploading of commented documents via Workflow

· Assistance in preparation of and updating the distribution matrix as and when required, and advising all changes as appropriate

· Production of Reports to include but not limited to;

o Incoming & Outgoing reports on a weekly basis

o Tracking registers to record receipt & return of submittals

o To maintain & manage RFI tracking lists

o To highlight to team leaders any late items not yet responded

o Other reasonable tasks as required by Doc Control Manager & Team leaders

Requirements:

· Document Control Assistant - 1 year of working experiences in Electronic Document Management System (EDMS) environments, such as Aconex, Procore & BIM360 Documents

· Document Controller - 4 years of working experiences in Electronic Document Management System (EDMS) environments, such as Aconex, Procore & BIM360 Documents

· To fully engage with the usage of Electronic Document Management System (EDMS) and any other electronic document control systems pertinent to a project.

· Illustrate a positive, proactive attitude

· Logical approach to work with a consistent attention to detail

· A full understanding of AEDAS IMS and its supporting documents

· Ability to cope with conflicting demands, to be able to proactively highlight any conflicts of priorities and suggest action plans to resolve issues

Please submit a copy of your updated CV including your current salary, expected salary and notice period to [email protected].

Job Summary

This incumbent is accountable for the completion of construction work in a timely and profitable manner consistent with project objectives and within budget.

He is overall responsible to oversee all construction activities with respect to schedule, performance, procedure, and making recommendations to Project Managers for improvements and corrective actions. He is also tasked to oversee the delivery and use of materials, tools, and equipment; and the quality of construction, staff productivity, and safety. He also oversees all sites’ HSSE Management and comply to local government and client HSSE regulations.

Duties & Responsibilities:

• Supervise sub-contractor and coordinate with various agencies.
• Manpower planning, deployment and control.
• Coordinate to resolve construction issues and manage schedule.
• Safety mind-set and able to develop RA and permit to work application.
• Good written and oral communication.
• Good interpersonal skill to deal with people at construction site.
• Prepare construction execution plan/ policies.
• Monitoring work schedule, progress, performance, etc.
• Conduct meetings.
• Initiate, and coordinate meetings with other disciplines.
• Approval of change in specifications or procedures.
• Prepare reports, handing over procedures/ closing out procedures, etc.
• Responsible for all problems solving on site.

Requirements:

• Bachelor’s Degree or equivalent.
• Minimum 8 to 15 years’ of relevant experience in construction field.
• Independently manage construction work in an operational plant (refinery).
• Accountable for the completion of construction work in a timely, profitable manner.
• Experience in oil and gas or chemical projects.
• Good knowledge and experience in construction planning and execution.

Interested parties, please send in your detailed resume.