Microbiology and Biochemical Product Testing:

• Perform EM such as active air sampling, surface and passive air samplings, plate readings and inspection of cleaned facility and sterilised equipment
• Responsible for planning,monitoring and approving microbiological testing
• Perform method Qualification,validation and product testing (e.g. sterility and endoxin) to support QC lot release.
• Perform stability testing of released final products as per protocol and timelines.
• Support assessment of certification/accreditation and services provided by external labs for QC testing.
• Knowledge in biochemical testing, including cell counts, flow cytometry, ELISA, PCR analysis, and compendial testing (pH, Appearance) as per USP, JP, and EP standards

Documents, Records and Data Management:

• Drafting and updating of Standard Operation Procedures (SOPs) and specification documents for EM, equipment, sampling plan, test methods, final products and raw/packaging materials.
• Author and review technical protocols and reports (e.g. EM risk analysis), develop guidelines and standard practices for data documentation, analysis and training.
• Review test results, document data and produce trends (e.g. EM) in an efficient, organised and presentable manner to facilitate discussions, support business and performance metrics reporting.

Deviations, Change Control and Audits Management:

• Support deviations (e.g. test OOS, EM excursion) initiation, investigations and root cause analysis for product defects and quality lapses.
• Support change control and CAPA implementation.
• Support internal and external audits/inspections.

Equipment and Lab Management:

• New equipement commisihing support( Operational qualification-OQ, Performance qualification- PQ
• Monitor and schedule equipment calibration and maintenance as per schedule and site master file.
• Perform lab housekeeping, lab cleaning and biohazard/waste management.
• Perform monitoring and procurement of lab inventory, for e.g. materials and consumables.

Continuous Improvement:

• Implement initiatives to encourage improvement of QC procedures, activities and workflows.
• Conduct routine literature review through established publication channels to ensure continual knowledge proficiency on both GMP and current technological trends relevant to CellVec’s activities.

As a Senior Industry 4.0 (I4.0) Analyst at Micron Technology, Inc., you will report to the Smart Manufacturing and Artificial Intelligence organization. The team defines, drives and delivers end to end smart manufacturing solution, integrated across functions of the business. The team will investigate applying industry-leading the best methodologies in automation, AI and machine learning to enhance Micron’s product development, business, and administrative processes across the company.

Responsibilities and Tasks

• Lead the analysist for complex business problems and issues using data from internal and external sources to provide insight to decision-makers. Identifies and interprets trends and patterns in datasets to locate influences.
• Constructs forecasts, recommendations and strategic/tactical plans based on business data and market knowledge.
• Creates specifications for reports and analysis based on business needs and required or available data elements.
• May provide consultation to users and lead cross-functional teams to address business issues.
• May directly produce datasets and reports for analysis using system reporting tools
• Understands business problem and translates user requirements into technical language and vice versa for data science / technical solution / IT teams.
• I4.0 Analyst with strong domain knowledge is preferred and will bridge the gap between users and developer team
• Accountable to ensure modules / functionalities address current metrics gaps and new business opportunity
• Translating project expected project metrics gain into dollar values, partnering with Finance
• Defining priority for projects for strategic pillar roadmap provided by Strategy Pillar Leader
• Conduct diagnostic and understand gaps and areas of improvement in current IIoT solutions and ways of working
• Work with PDE, Data Scientist, System Architect and IIoT end users to design & define requirements and analyze information, production interdiction that related to the adoption of IIoT for Smart Manufacturing
• Ensure optimization and standardization of tools and processes leveraging central team business partners to allow I4.0 solutions to be scaled sustainably across Micron Backend sites
• Develop business case, including impact validation approach, ROI of potential solutions and prioritize & propose projects for implementation
• Lead projects and activities that will require the coordination, support, and management of resources from global teams
• Provide expert functional and process guidance on system interfaces and capabilities

Qualifications

• Master/Bachelor's Degree in Electrical Engineering, Specialized in Data Analytic.
• At least 5-7 years of work experience in Assembly & Test and Post Wafer Fab (PwF) Process & Equipment Engineering or similar operations functions, good knowledge in High Bandwidth Memory (HBM) production is preferred
• Familiar with Composite Metro solution development, systems and solutions for high volume and high mix production environment
• Good interpersonal skills with demonstrable ability to effectively lead and present to small and large groups
• Proven ability to work multi-functionally with peers, senior and mid-level management
• Peer leadership and relationship management skills
• Strong analytical and problem-solving skills
• Highly organized and ability to remain flexible to the changing business needs

About Micron
As the leader in innovative memory solutions, Micron is helping the world make sense of data by delivering technology that is transforming how the world uses information. Through our global brands — Micron, Crucial and Ballistix — we offer the industry’s broadest portfolio. We are the only company manufacturing today’s major memory and storage technologies: DRAM, NAND, NOR and High Bandwidth Memory. Our solutions are purpose built to demonstrate the value of data to unlock financial insights, accelerate scientific breakthroughs and enhance communication around the world.We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status

Analyzes complex business problems and issues using data from internal and external sources to provide insight to decision-makers. Identifies and interprets trends and patterns in datasets to locate influences. Constructs forecasts, recommendations and strategic/tactical plans based on business data and market knowledge. Creates specifications for reports and analysis based on business needs and required or available data elements. May provide consultation to users and lead cross-functional teams to address business issues. May directly produce datasets and reports for analysis using system reporting tools.

Job Description

• Working with Process Engineer & Engineering team on QC requirement
• Documenting inspection criteria and quality plan
• Work with QA, Process and Product team on corrective action with quality issue
• Work with Process team on in-process audit and FQC audit

Job Requirements:

• Minimum Diploma in Manufacturing /Quality Engineering
• At least 1 year of relevant working experience in Electronics Product Manufacturing environment
• Control of Supplier Quality Assurance (SQA)
• Quality control of in-coming, in-process and out-going products
• Knowledge of ISO 9001, 14001, 13485 & 45001, FDA requirement
• Able to understand IPC requirement in PCB
• Assembly, quality requirement of plastic molding, die casting, extrusion, metal stamping and machining parts

*Please be notified that only shortlisted candidates will be notified*

By submtting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

EA Personnel Name: Chan Jun Wei

EA Personnel No: R1543992

EA License No: 21C0845

Responsibilities:

• Oversee and able to control group of inspection, leveraging on your manufacturing and QC experience.
• Apply knowledge of QC sampling techniques and operate measuring instruments effectively.
• Conduct QC sampling inspections to ensure compliance with quality standards.
• Prepare samples and perform quality testing as required.

Requirements:

• 1-2 years of relevant working experience in quality control or a related field.
• Strong communication and interpersonal skills.
• Ability to multitask and work in a fast-paced environment.

Other Information:

• Work Schedule: 5-day work week (8:00 AM - 5:30 PM)
• Location: Woodlands.
• Transport: Transport provided from Woodlands MRT

MOM Licences No: 02C5465

EA Personnel Registration No: R24125030

Key Responsibilities

The core responsibilities of a Construction Coordinator include project planning, team coordination, and ensuring compliance with both safety and building codes. Specific tasks may involve:

• Developing project timelines and milestones in cooperation with other construction management professionals.
• Coordinating efforts between various stakeholders including architects, engineers, subcontractors, and clients.
• Monitoring project progress and reporting status to senior management and stakeholders.
• Ensuring that all materials and equipment are delivered to the site on time.
• Conducting regular site inspections and risk assessments to comply with health and safety standards.
• Resolving conflicts or concerns involving labor forces or project impediments.
• Managing project documentation and maintaining comprehensive project records.

Responsibilities:

• Reporting to the Project Manager/ Project Director/ Business Unit Head.
• Jointly prepare the project start-up and execution plan with the Project Manager, as well as define key project targets in terms of time, cost, quality, resources, EHS, and contractual.
• Manage and plan every stage of a construction project and ensure the project is completed safely, within budget, on time while achieving the desired quality.
• Manage resource deployment and overall management of site at all stages of construction works.
• Manage the procurement of material and stock control, as well as the timely delivery of equipment, building components, and any other related logistics arrangement at all stages of construction works.
• Manage subcontractors, including monitoring of manpower, work progress, and scheduling of their works.
• Work closely with client representatives and consultants in all project matters, especially relating to contracts, construction, and EHS issues.
• Establish appropriate reporting and controlling procedures to improve project operations and delivery.
• Drive the implementation of innovative construction methodologies and practices on-site to improve productivity and achieve lean outcomes.

Requirements:

• Degree in Civil Engineering or related.
• 5-10 years experience in project management and/ or site management works for building projects and multi-level basement construction.
• Strong technical understanding of construction methodologies and sequencing, with a special interest in precast and DfMA technology;
• Good leadership skill and a team player

Key Responsibilities

The core responsibilities of a Construction Coordinator include project planning, team coordination, and ensuring compliance with both safety and building codes. Specific tasks may involve:

• Developing project timelines and milestones in cooperation with other construction management professionals.
• Coordinating efforts between various stakeholders including architects, engineers, subcontractors, and clients.
• Monitoring project progress and reporting status to senior management and stakeholders.
• Ensuring that all materials and equipment are delivered to the site on time.
• Conducting regular site inspections and risk assessments to comply with health and safety standards.
• Resolving conflicts or concerns involving labor forces or project impediments.
• Managing project documentation and maintaining comprehensive project records.

Responsibilities

• Communicate and reconcile quality / technical matters to various stakeholders.
• Investigate supplier non-conformance, drive root cause analysis, discuss corrective actions and implement process improvement, including source inspection.
• Work with suppliers to ensure their manufacturing processes comply with customers’ expectations.
• Monitor non-conformance performance and collaborate with suppliers to drive continuous improvement in supplier’s quality.
• Maintain and improve product quality by completing product and compliance audits.
• Prepare and review monthly data to analyse quality issues.
• Process engineering changes (ECN).
• Maintain customer’s claims system.
• Maintain calibration process for Shimadzu’s equipment.
• Ad-hoc duties as assigned.

Requirements

• Diploma or degree in supply chain management, engineering or science.
• At least three years of experience in quality engineering or related role.
• Having experiences in mechanical engineering or related field will be advantageous.
• Possess good communication skills and able to articulate ideas succinctly to local and international stakeholders.
• Possess a good analytical mind, positive attitude and patience under challenging situations.
• Having a tenacious desire to solve challenging technical problems will be a distinct advantage.
• Possess a good organizational skill and a strong penchant for neatness.
• Possess a high level of proficiency in Microsoft Office and Microsoft 365.
• Able to work independently and a good team player.
• Possession of a Class 3 driving licence is preferred.

We regret that only shortlisted candidates will be contacted.

Summary

The incumbent reports to the Senior Quality Engineer and is responible for the following areas of work

• Incoming inspection
• Shipping documentation and verification
• QMS documentation review
• QC material lab testing
• New product development testing
• In-house continuous improvement projects
• Support on material failure investigation

Description of Responsibilities & Duties

• Incoming inspection, Shipment documentation and verification 50%
• QMS documentation, Document Handling and verification, QC material lab testing 20%
• In-house continuous improvement projects, support on material failure investigation & new product development testing 20%
• Ad-hoc duties as assigned by supervisor 10%

Knowledge & Skills

• Basic understanding of metallic materials and precision engineering process
• Basic understanding of ISO 13485 and MSA
• Competent with Microsoft Office tools.
• Science/Engineering technical qualification.
• Knowledge in inspection, measurement system, and document control

Education & Experience

• Higher Nitec & Above (Material Science related)
• Minimum 1 years of relevant working experiences
• Some experience in Shipment documentation & verification and QC inspection

Job Description

· Collaborate with cross-functional teams such as Mechanical Engineers, Test Engineers, Lab Technicians, and Project Engineers to execute ocean basin model testing projects, such as floating offshore wind projects.

· Analyse and comprehend project requirements related to hydrodynamic testing, model instrumentation, and data acquisition.

· Select and implement suitable data acquisition systems, control system design, and develop software architecture specific to ocean model testing needs.

· Develop and maintain application software for new ocean basin test setups and custom test requirements.

· Upgrade existing software systems to accommodate new test protocols or methodologies for ocean model testing.

· Choose appropriate sensors for wave, current, and motion measurements, ensuring seamless integration with control systems and software.

· Create and update documentation, including software designs, changes, user manuals, and standard operating procedures (SOPs) for ocean model tests.

· Upgrade LabVIEW-based software applications to newer versions, ensuring they meet the latest testing requirements.

· Troubleshoot and resolve issues in control systems, data acquisition, and software during model testing.

· Test and validate application software before deployment to the ocean basin test setup.

· Prepare comprehensive user manuals, SOPs, and provide training for test engineers to ensure smooth operation of the test environment.

Job Requirements

· Minimum qualification: Bachelor of Engineering (BEng) / Bachelor of Technology (BTech) in Electronics, Electrical, Instrumentation, or Computer Science with at least 2 years of relevant experience, particularly in LabVIEW.

· Proficiency in different versions of LabVIEW, including the latest versions with relevant toolkits.

· Experience in designing and developing NI LabVIEW-based data acquisition and control systems for ocean basin model testing or similar environments.

· Proven ability to develop modular and scalable applications using LabVIEW?s standard architecture.

· Experience in developing LabVIEW applications for Windows and Real-Time (RT) Linux environments.

· Proficiency in integrating NI hardware systems such as PXI, cRIO, and CompactDAQ into the testing framework.

· Hands-on experience with communication protocols like TCP/IP, UDP, Serial, USB, CAN, and EtherCAT for testing and control purposes.

· Experience with integrating third-party programmable instruments (e.g., multimeters, power supplies, oscilloscopes) and controllers into ocean testing setups.

· Experience in developing NI software drivers for third-party hardware and integrating third-party software with LabVIEW.

· Knowledge in selecting, wiring, and troubleshooting sensors used in hydrodynamic and ocean model testing (e.g., pressure sensors, accelerometers, flow meters).

· Experience in reading control panel schematics, designing control systems, and selecting appropriate control panel hardware for model testing.

· Strong team player with the ability to work independently and collaborate in cross-functional project teams.

· Experience interfacing induction motors with VFDs and control systems, with knowledge of VFD configuration for use in testing environments.

· Strong troubleshooting skills at the signal and system level for data acquisition and automated test systems.

· Excellent documentation skills for capturing test requirements, preparing software designs, and writing user manuals.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Market tender

We are representing a Global leader in the Facade industry in search for a Market Tender.

Job Responsibility:

• Review construction bidding documents, including drawings, commercial documents, and curtain wall technical requirements.
• Calculate the quantities for each curtain wall system.
• Mark the scope of the curtain wall contract work on the floor plans, elevations, and curtain wall detail drawings using color coding.
• Based on the design drawings and unit prices for materials, labor, and measures, calculate the material content (including aluminum profiles, iron components, aluminum panels, glass, etc.) and system prices for each curtain wall system, and complete the overall cost calculation documentation.
• Allocate itemized unit prices based on the finalized total cost.
• Perform other tasks related to curtain wall commercial bidding.

Job Requirements:

• Bachelor’s degree or above in Engineering Cost, Civil Engineering, Mechanical Engineering, or related fields.
• At least 3 years of experience in commercial bidding for overseas curtain wall projects

Regret to inform that only shortlisted candidates will be notified.

www.dadaconsultants.com

EA Registration Number: R1878287

Business Registration Number: 201735941W.

Licence Number: 18S9037

Carry out day-to-day site operations and supervise construction workers.

Carry out inspection as well as resolving and monitoring rectification works.

Assist and support Engineers in carrying out works as assigned.

Supervise the construction of works and incorporation of materials and ensure that they are carried out in accordance with the Project Plan.

Assist the Engineers in ensuring that the works are carried out to schedule and in accordance to relevant regulations.

Ensure company’s safety rules are observed and obeyed.

Cooperating and communicating effectively with project manager and other project participants to provide assistance and technical support Performing overall quality control of the work (schedule, plans, personnel’s performance) and reporting regularly on project status.

Any ad hoc duty will be assigned.

Carry out day-to-day site operations and supervise construction workers.

Carry out inspection as well as resolving and monitoring rectification works.

Assist and support Engineers in carrying out works as assigned.

Supervise the construction of works and incorporation of materials and ensure that they are carried out in accordance with the Project Plan.

Assist the Engineers in ensuring that the works are carried out to schedule and in accordance to relevant regulations.

Ensure company’s safety rules are observed and obeyed.

Cooperating and communicating effectively with project manager and other project participants to provide assistance and technical support Performing overall quality control of the work (schedule, plans, personnel’s performance) and reporting regularly on project status.

Any ad hoc duty will be assigned.

Planning, implementing and monitoring Site work schedule.

Coordination the activities concerned with technical development, scheduling, resolving technical problems, quality assurance, testing and inspection.

Check working drawing, identify discrepancy for resolution.

Settlement of project disputes during execution of project.

Carry out design, material requisition, cost control, project supervision and documentation.

Handle technical and engineering problems.

Plan and execute work schedule based on contract schedule.

Coordinate and control construction works on site.

Evaluate subcontractors risk assessment, safe work procedures and method statements.

Review subcontractors/supplier performance after completion works.

Planning, implementing and monitoring Site work schedule.

Coordination the activities concerned with technical development, scheduling, resolving technical problems, quality assurance, testing and inspection.

Check working drawing, identify discrepancy for resolution.

Settlement of project disputes during execution of project.

Carry out design, material requisition, cost control, project supervision and documentation.

Handle technical and engineering problems.

Plan and execute work schedule based on contract schedule.

Coordinate and control construction works on site.

Evaluate subcontractors risk assessment, safe work procedures and method statements.

Review subcontractors/supplier performance after completion works.

Planning, implementing and monitoring Site work schedule.

Coordination the activities concerned with technical development, scheduling, resolving technical problems, quality assurance, testing and inspection.

Check working drawing, identify discrepancy for resolution.

Settlement of project disputes during execution of project.

Carry out design, material requisition, cost control, project supervision and documentation.

Handle technical and engineering problems.

Plan and execute work schedule based on contract schedule.

Coordinate and control construction works on site.

Evaluate subcontractors risk assessment, safe work procedures and method statements.

Review subcontractors/supplier performance after completion works.

Planning, implementing and monitoring Site work schedule.

Coordination the activities concerned with technical development, scheduling, resolving technical problems, quality assurance, testing and inspection.

Check working drawing, identify discrepancy for resolution.

Settlement of project disputes during execution of project.

Carry out design, material requisition, cost control, project supervision and documentation.

Handle technical and engineering problems.

Plan and execute work schedule based on contract schedule.

Coordinate and control construction works on site.

Evaluate subcontractors risk assessment, safe work procedures and method statements.

Review subcontractors/supplier performance after completion works.

• To supervise the work of sub-contractors and work closely with other operations staff to meet the project schedule
• Report to the Construction Manager
• You will adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship so as to meet the stringent requirement conducted during site tests and inspections
• Prepared and Assembled ready wooden cabinetry to drawings and specifications for installation.
• Verified dimensions and checked the quality and fit of pieces.
• Measured and marked dimensions of sites.
• Performed Cabinet assembly with the use of hand tools.
• Assisted with all aspects of the assembly team.
• Read detailed schematics for cabinets and executed assembly accurately.
• Helped with delivering and manually installing cabinets.
• Installed cabinets in residential homes.
• Minimum 3 years of relevant experience in the Construction Industry
• Possess a certificate in Building Construction Safety Supervisor (BCSS)
• Supervisory experience in foundation & structural works on site
• Able to work independently with a positive attitude

• To supervise the work of sub-contractors and work closely with other operations staff to meet the project schedule
• Report to the Construction Manager
• You will adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship so as to meet the stringent requirement conducted during site tests and inspections
• Prepared and Assembled ready wooden cabinetry to drawings and specifications for installation.
• Verified dimensions and checked the quality and fit of pieces.
• Measured and marked dimensions of sites.
• Performed Cabinet assembly with the use of hand tools.
• Assisted with all aspects of the assembly team.
• Read detailed schematics for cabinets and executed assembly accurately.
• Helped with delivering and manually installing cabinets.
• Installed cabinets in residential homes.
• Minimum 3 years of relevant experience in the Construction Industry
• Possess a certificate in Building Construction Safety Supervisor (BCSS)
• Supervisory experience in foundation & structural works on site
• Able to work independently with a positive attitude

• To supervise the work of sub-contractors and work closely with other operations staff to meet the project schedule
• Report to the Construction Manager
• You will adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship so as to meet the stringent requirement conducted during site tests and inspections
• Prepared and Assembled ready wooden cabinetry to drawings and specifications for installation.
• Verified dimensions and checked the quality and fit of pieces.
• Measured and marked dimensions of sites.
• Performed Cabinet assembly with the use of hand tools.
• Assisted with all aspects of the assembly team.
• Read detailed schematics for cabinets and executed assembly accurately.
• Helped with delivering and manually installing cabinets.
• Installed cabinets in residential homes.
• Minimum 3 years of relevant experience in the Construction Industry
• Possess a certificate in Building Construction Safety Supervisor (BCSS)
• Supervisory experience in foundation & structural works on site
• Able to work independently with a positive attitude

Job Description

• Ensure all construction works are performed on time and in compliance with all necessary standards, code of practice and safety regulations.
• Responsible for the supervision and coordination of works at construction site.
• Monitor progress, quality of workmanship.
• Supervise the work activity on site, monitor the progress and keep track based on schedule
• Supervise and coordinate of construction workers / operators in construction project
• To assist in prepare information to office to prepare progressive claims and VO.

Job Description:

• Provide strategic leadership and oversee the execution of construction projects from inception to completion.
• Manage budgets, schedules, and resource allocation to ensure projects are completed on time and within budget.
• Establish and implement policies, procedures, and standards to ensure operational efficiency.
• Collaborate with stakeholders, including clients, subcontractors, suppliers, and regulatory bodies, to ensure project success.
• Drive business growth through strategic planning, market analysis, and identifying new opportunities.
• Lead tendering, contract negotiations, and risk management activities.
• Ensure compliance with safety regulations, construction laws, and environmental standards.
• Monitor project progress through regular site visits and performance evaluations.
• Prepare detailed reports on operational and financial performance for the board and other stakeholders.
• Mentor and guide senior management and project teams to achieve organizational goals.
• Maintain strong relationships with clients, suppliers, and other stakeholders.
• Address customer concerns promptly and ensure high levels of satisfaction.
• Represent the company at industry events and networking opportunities.
• Identify and secure new business opportunities and partnerships.
• Lead marketing initiatives and campaigns to enhance brand visibility.
• Analyze market competition and adjust strategies accordingly.

Requirements:

• At Least Diploma in Construction Management, Interior Design or a related
• Minimum 10 years of total working experience in the construction industry.
• At least 4 years of experience as a General Manager in a construction company.
• Proven leadership and team management capabilities.
• Strong negotiation, problem-solving, and decision-making skills.
• In-depth knowledge of construction laws, safety standards, and industry best practices.
• Proficiency in project management tools, financial management, and tendering processes.
• Exceptional communication and stakeholder management skills.
• Ability to handle complex, large-scale projects under tight deadlines.
• Strong analytical mindset and ability to drive organizational performance.

We are regret that only shortlisted candidates will be notified.

Carry out day-to-day site operations and supervise construction workers.

Carry out inspection as well as resolving and monitoring rectification works.

Assist and support Engineers in carrying out works as assigned.

Supervise the construction of works and incorporation of materials and ensure that they are carried out in accordance with the Project Plan.

Assist the Engineers in ensuring that the works are carried out to schedule and in accordance to relevant regulations.

Ensure company’s safety rules are observed and obeyed.

Cooperating and communicating effectively with project manager and other project participants to provide assistance and technical support Performing overall quality control of the work (schedule, plans, personnel’s performance) and reporting regularly on project status.

Any ad hoc duty will be assigned.

Planning, implementing and monitoring Site work schedule.

Coordination the activities concerned with technical development, scheduling, resolving technical problems, quality assurance, testing and inspection.

Check working drawing, identify discrepancy for resolution.

Settlement of project disputes during execution of project.

Carry out design, material requisition, cost control, project supervision and documentation.

Handle technical and engineering problems.

Plan and execute work schedule based on contract schedule.

Coordinate and control construction works on site.

Evaluate subcontractors risk assessment, safe work procedures and method statements.

Review subcontractors/supplier performance after completion works.

Planning, implementing and monitoring Site work schedule.

Coordination the activities concerned with technical development, scheduling, resolving technical problems, quality assurance, testing and inspection.

Check working drawing, identify discrepancy for resolution.

Settlement of project disputes during execution of project.

Carry out design, material requisition, cost control, project supervision and documentation.

Handle technical and engineering problems.

Plan and execute work schedule based on contract schedule.

Coordinate and control construction works on site.

Evaluate subcontractors risk assessment, safe work procedures and method statements.

Review subcontractors/supplier performance after completion works.