As a Quality Supplier Manager in ASML Singapore office, you will be managing a couple of ASML key suppliers in Southeast Asia, responsible for their quality and operational performance. You work with suppliers on ensuring parts quality performance, solving both quality and technical issues, and drive process improvements, for example quality and yield improvement, process control, cycle time reduction, risk analysis and mitigation. You work closely together with the supplier team, the supplier manager, the procurement manager, engineers, etc. to drive success for the organization. The main goal of you is to secure an excellent quality of parts delivered by our suppliers on time and with the right cost to ASML.

Role and responsibilities

• Responsible for the entire Quality and Technical process performance of suppliers and their n-tier suppliers
• Monitor, review and drive supplier quality performance from incidents to structural improvement to achieve various quality KPI targets
• Contribute to supplier development (e.g. implementing SPC, lean, FMEA, operational excellence at suppliers or n-tier suppliers).
• Optimize manufacturing processes at suppliers by improving quality, testing and qualification infrastructure
• Drive yield improvements and process improvements at suppliers. Actively participate in improvement project at suppliers (cycle time reduction, cost of goods reduction)
• Carry-out analysis of quality issues and drive technical solutions needed during material availability escalations
• Support implementation of hardware changes at suppliers
• Build-up and develop technical competences within ASML (SPC, lean manufacturing, FMEA, operational excellence) to drive and support operational excellence at suppliers

Education and experience

• Bachelor or master degree in Electrical Engineering, Mechanical Engineering, or 10+ years equivalent practical experience
• Specialism in electro-mechanic assemblies
• Proficiency in quality tools like 8D, FMEA, Six Sigma, Lean, etc.
• Project management experience
• Ability to travel locally or internationally to supplier sites

Skills

Working at the cutting edge of tech, you’ll always have new challenges and new problems to solve – and working together is the only way to do that. You won’t work in a silo. Instead, you’ll be part of a creative, dynamic work environment where you’ll collaborate with supportive colleagues. There is always space for creative and unique points of view. You’ll have the flexibility and trust to choose how best to tackle tasks and solve problems.
To thrive in this job, you’ll need the following skills:

• Proven track records in improving supply chain processes in production environment
• Capable to make deep-dive analyses whilst maintaining top-level overview regarding problem & solutions
• Capable to work under pressureand cope with complex matters and tough suppliers to drive results
• Excellent interpersonal and teamwork skills with the ability to influence and motivate others
• Excellent written and verbal communication skills
• Pro-active attitude to drive for improvement

Job Description

a) Report to the Project Manager. Responsible for the EHS systems and implementations.

b) The detailed duties and responsibilities includes but not limited to the following:

i) Assist and advise the Project Manager on EHS planning for overall project scope and detailed activities.

ii) Study and fully understand the requirements of company ISO, EHS and sub-contracts agreements.

iii) Liaise, handle and keep proper records in dealing with all related authorities in complying with their respective requirements.

iv) Conduct regular site audits to ensure compliance with EHS requirements. He is authorized to take necessary actions including issuance of partial stop work order as he and the Project Manager deem fit.

v) Handle all accident and incident reports.

vi) Work as a team with project team members and sub-contractors to provide a safe working environment.

vii) Prevention of fines, imposition of demerit points and SWO from the authorities or owners like MOM, NEA and HDB is a key role which is also a key performance measurement of WSHO cum ECO.

viii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirement

- Certified NEA, ECO, ECO, ECMO

- At least 3-5 years' on-site experience

Job Description

a) Report to the Project Manager. Assist the Project Manager in managing certain section(s) of the project, as assigned by the Project Manager and shown in the organization chart.

b) The detailed duties and responsibilities of Assistant Project Manager includes but not limited to the following:

i) Prepare detailed programme and ensure that the assigned tasks are completed within the time frame as stipulated in the master programme.

ii) Implementation of all ISO quality, EHS, green and gracious procedures and requirements.

iii) Complete the project with quality to meet client's / consultant's requirements.

iv) Ensure compliances to Authorities’ requirements.

v) To deal with consultants and owners on all matters including solving of technical problems, submission of shop drawings and samples, etc.

vi) To ensure that the appointed sub-contractors are able to complete the sub-contract works within the schedule and comply with the technical and contractual requirements.

vii) Manage the actual cost of works so that they are below the budgeted costs.

viii) Manage the subordinates so that they are following work systems, productive, and encourage team work among the team members.

Job Requirement

- Degree in Civil Engineering/ M&E Engineering

- Mininum 8 - 12 years' experience

- At least 8 years' experience in leading engineers

Job Description

a) Report to the Manager/Team leader as shown in the organization chart. Responsible for the coordination and control of technical matters, quality implementation and site supervision works.

b) The detailed duties and responsibilities includes but not limited to the following:

i) Coordinate with all the parties including sub-contractors and consultants to solve and coordinate technical issues, production of drawings and ensure proper transmission of data to all parties involved. Ensure that the detailed schedules of drawing production and site progress are met.

ii) For quality management, the coordinator is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

iii) Supervise site works according to the quality and EHS requirements.

iv) Handle all inspections and handing over process with the final objective of achieving customer satisfaction and high Conquas/QM score.

v) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirement

- Degree in Architecture / Engineering

- Minimum 2-3 years' experience in BIM Drafting (Architectural or M&E)

• MNC, attractive remuneration package
• Salary up to $8000, AWS, bonuses, Dental, medical
• Leadership skills
  North-East, 5 days work week
• Career advancement

Job responsibilities:

• Provide on-site product & system commissioning/servicing support.
• Support on product and application presentation to new and existing customers.
• Project/systems configuration and coordination, new product launch.
• Assist in distribution channels-technical related.
• Brain storming of ideas to support on special projects.
• Providing technical support to sales team.
• Handling complaints on technical issues and support marketing activities.

Requirements:

• Possess a Degree or Diploma in Engineering (with relevant experience).
• Knowledge of water treatment, hygienic and steam, food and beverage, pharmaceutical, semi-conductor industries is an added advantage.
• Minimum 8 to 10 years’ experience in Industrial/Technical products, particularly valves, sensors and process control instrument.
• Strong leadership skills and able to lead a team.
• A hands-on person.
• Able to communicate with customers on building solutions.
• Strong communication skills, Dynamic and goal-oriented, team player.
• Computer and PLC literate, proficient in MS Excel, Word, Powerpoint
• Knowledge of Adobe Photoshop/InDesign will be an added advantage.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

Responsibilities:

As an Accounts Administrative Assistant, you will play a role in maintaining the smooth operation of our financial processes. Your primary responsibilities will include:

• Mailing and document management
• Invoice management
• Filing & archiving
• Vendor communication

Requirements:

• O Levels
• 2 to 3 years administrative experience

Job Description

a) Report to the Manager/Team leader as shown in the organization chart. Responsible for the coordination and control of technical matters, quality implementation and site supervision works.

b) The detailed duties and responsibilities includes but not limited to the following:

i) Coordinate with all the parties including sub-contractors and consultants to solve and coordinate technical issues, production of drawings and ensure proper transmission of data to all parties involved. Ensure that the detailed schedules of drawing production and site progress are met.

ii) For quality management, the coordinator is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

iii) Supervise site works according to the quality and EHS requirements.

iv) Handle all inspections and handing over process with the final objective of achieving customer satisfaction and high Conquas/QM score.

v) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirement

- Degree in Architecture / Engineering

- Minimum 2-3 years' experience in BIM Drafting (Architectural or M&E)

Job Description :

Pre Contract Stage

• Quantity take off and cost comparison for main work trades
• To assist in establishing client’s requirements and undertaking feasibility studies
• To monitor relevant planning authority web sites to identify work opportunities (tender notice)
• To complete and submit of PQ document
• To access tender documents and ensure sufficient information available for tender preparation
• To request for quotations and assessment
• To prepare tender documents for submission
• To submit tenders and follow up for clarification

Post Contract Stage

• Understand and reasonably interpret contract document & drawing
• Understand contract provision thoroughly and advise the risk/areas of concern
• To perform measurement and cost breakdown
• To prepare payment certification to sub-contractor/ supplier
• To prepare payment claim to client
• To identify and evaluate variation work

Requirement:

• Diploma / Degree in Quantity Surveying

Responsibilities:

Pre Contract Stage

• Quantity take off and cost comparison for main work trades
• To assist in establishing client’s requirements and undertaking feasibility studies
• To monitor relevant planning authority web sites to identify work opportunities (tender notice)
• To complete and submit of PQ document
• To access tender documents and ensure sufficient information available for tender preparation
• To request for quotations and assessment
• To prepare tender documents for submission
• To submit tenders and follow up for clarification

Post Contract Stage

• Understand and reasonably interpret contract document & drawing
• Understand contract provision thoroughly and advise the risk/areas of concern
• To perform measurement and cost breakdown
• To prepare payment certification to sub-contractor/ supplier
• To prepare payment claim to client
• To identify and evaluate variation work

Requirement:

• Diploma / Degree in Quantity Surveying

· Able to handle full set of accounts

· Handle quarterly GST submission and receivables

· Perform Accounts Payable function (i.e process invoices and payments)

· Manage month end close process and ensure all journals, bank reconciliations & etc

· Prepare monthly management reports

· Preparation of year end statutory financial statements

· Preparing documents for annual audits and liaising with auditors

· Liaise and communicate with bankers and internal related departments

· Ensuring compliance with current accounting standards

· Preparation of corporate tax computation

· Preparation of annual budget

· Assist in any other ad-hoc duties as assigned

· Prepare software Skills MYOB Software , IFCA ,Others

· Accounting experience in the Property Development industry would be an advantage

• MNC, attractive remuneration package
• Salary up to $8000, AWS, bonuses, Dental, medical
• Leadership skills
  North-East, 5 days work week
• Career advancement

Job responsibilities:

• Provide on-site product & system commissioning/servicing support.
• Support on product and application presentation to new and existing customers.
• Project/systems configuration and coordination, new product launch.
• Assist in distribution channels-technical related.
• Brain storming of ideas to support on special projects.
• Providing technical support to sales team.
• Handling complaints on technical issues and support marketing activities.

Requirements:

• Possess a Degree or Diploma in Engineering (with relevant experience).
• Knowledge of water treatment, hygienic and steam, food and beverage, pharmaceutical, semi-conductor industries is an added advantage.
• Minimum 8 to 10 years’ experience in Industrial/Technical products, particularly valves, sensors and process control instrument.
• Strong leadership skills and able to lead a team.
• A hands-on person.
• Able to communicate with customers on building solutions.
• Strong communication skills, Dynamic and goal-oriented, team player.
• Computer and PLC literate, proficient in MS Excel, Word, Powerpoint
• Knowledge of Adobe Photoshop/InDesign will be an added advantage.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

1) Attend all job descriptions requirements for the position of Control Room Operator;

2) Minimum years experience operating with Oil and Gas industry;

3) Minimum years experience working offshore as Control system technician;

4) Responsible for the efficient and effective control of the process plant operation and production-related equipment for the assigned unit, in compliance with MODEC procedures, national and international regulations and standards, thus ensuring the unit's availability, safe operation and the production and revenue target achievement, contributing to the business continuity and growth.

5) Control and carry out process plant operation and production-related equipment via FCS and other control panels, under the direction of Production Supervisor and with the support from Operators' team, including operational routines, monitoring, controlling and operational optimization of the process plant, sampling and chemical analyses, start/stop and isolations of equipment, commissioning/decommissioning and operational alignments/maneuvers, in order to ensure that the production systems of the platform are operated according to the project and its operating philosophy, thus optimizing production performance and chemical consumption;

6) Contribute to the unit's annual budget planning (expenses and investments), by participating of the corporate planning, providing information about resources, replacements, services and materials needs and other expenses used in its activities, liaising with Supervisors and Technicians to ensure accurate information;

7) Contribute to an effective response to emergencies on board by being part of the Emergency Response Team, participating in all trainings, simulations and acting properly in a real situation, in accordance with MODEC's procedures, guidelines, as well as national and international regulations and best practices;

8) Support the offshore and onshore leaderships in the interface and contact with the client, authorities and internal stakeholders., by providing faithful information regarding operation's and control room routine and indicators, when requested by Production Supervisor;

9) Contribute to the MODEC’s Permit to Work management systems' implementation, by acting as Permit user of PTW for the task performed, in accordance with MODEC's procedures;

10) Required work for the project for 3 years and then sail with the FPSO to Brazil for 3 months, and work on this place for 2 years.

11) Fluent Brazilian Portuguese speakers are preferred.

12) Immediate availability preferred.

13) Knowledge on Brazilian legislation applicable to FPSO operation is required.

14) Availability to move to Brazil.

· Project co-ordination and planning with sub-contractors and suppliers;

· Attending site meetings occasionally and handling clients’ requirements;

· Preparing and formalizing work orders and subcontract agreements/ variation orders/ final accounts;

· Monitoring and keeping records on all variation orders in the project;

· Settlement of project final accounts with clients;

· Evaluation and certification of sub-contractors’ progress payments;

· Evaluates subcontractors’ works and recommends payments;

· Liaises with consultant’s Quantity Surveyor for contractual requirements;

· Performs other ad hoc duties as assigned.

· Responsible for measuring quantities and taking off

· Prepare Variation Orders, claims, final accounts, settlement and sub-contractor payments

· Prepare tender and contract documents, including bills of quantities with the architect and/or the client.

· Undertake cost analysis for repair and maintenance project work

· Assist in establishing a client’s requirements and undertake feasibility studies

· Perform risk, value management, and cost control

Job Requirements:

• Degree / Diploma in Constructions Building or its equivalent
• Ability in contract negotiation, contract administration & variation orders
• Able to work independently, be meticulous, analytical with excellent problem-solving skills, proactive, a good team player & able to meet tight deadlines

Maintain standards and quality processes in food manufacturing operations;

• Conduct daily in-process quality control inspections at production lines to ensure alignment with internal requirements and Good Manufacturing Practices
• Maintain integrity, accuracy and completeness of QC data and records
• Perform routine calibration and maintenance of equipment
• Assist in export documentation consolidation and Health Certificate application
• Assist in monitoring and inspecting company infrastructure, equipment and utilities
• Develop and implement quality control procedures and protocols to improve overall product quality and consistency.
• Inspect in-coming and out-going products according to receiving and shipping policy
• Review and validate supplier raw material records and results (COA)
• Process improvements initiatives across the company

Conduct tests for food quality and packaging;

• Sensory evaluation of products aligned with specification
• Perform product sampling for laboratory tests

Rectify non-compliance issues (Customer Complaints / Audit findings);

• Support traceability investigations into lapses in quality, hygiene standards and non-compliance to quality standards. Conduct investigation and follow up with corrective action

Conduct training for production staff on quality control procedures, GMP practices, and food safety protocols;

Job Requirements

• Minimum 1 year of relevant working experience / Diploma in Food Science or related field.
• Knowledge of food safety standards and GMP principle
• Proactive, willing to learn and good follow-up skills
• Able to work independently with minimal supervision

Job Description

- To support and adminster all WSH related matter

- To recommend to the occupier of the work site to implement reasonably practicable measures;

- Ensure all workers at site are wearing appropriate PPE at all times

- To conduct daily site safety inspection and enforce compliance on prevailing MOM Safety Acts and Regulations and other requirements;

- To investigate accidents to identify causes or to determine how such accidents might be prevented in future

- To assist the management of WSH programme and promote awareness to all stakeholders

- To liaise and follow up with the relevant stakeholders on WSH matters

- Be responsible for any other duties that may be assigned to you from time to time as the superior/management deem fit.

Job Requirements

- Possess Advance Certificate in WSH

- 2 - 4 years relevant experience in construction industry

- Good knowledge of Safety Regulations and Procedures.

- Familiar with Occupational Health & Safety Management System

- Good team player

Job Description:

· Able to install and repair electrical wiring, systems & fixtures in buildings.

· Assist the operations teams with electrical troubleshooting and repairs

· To perform corrective / preventative maintenance on equipment

· Having experience installing and repairing plumbing fixtures

· Ensure that the work area is safe and clean

Responsibilities:

• Responsible for Quality, speed, flexibility, and reliability of assigned commodities.
• Supports factory operations through fast resolution of supplier non-conformances, including short term containment, root cause identification, and long term, effective corrective actions.
• Work with cross functional teams to resolve supplier quality issues in a timely and systematic fashion.
• Ensure suppliers follow robust change management processes to maintain and improve product quality and production performance.
• Identify supplier related problems and improvement opportunities. Perform root-cause investigation, implement corrective actions improve supplier performance.
• Timely communication of supplier issues that affect product quality and delivery capability to the relevant stakeholders across the organization.
• Maintain lessons learned from various investigations to assist in development and sharing of best practice
• Acts as the internal expert on assigned commodities.

Requirements:

• Degree in Mechanical or Electrical / Electronics Engineering or any relevant.
• At least 5 years of experiences in handling suppliers, within manufacturing industry.
• Working knowledge and trained in Lean techniques; SPC, 6-Sigma (Green Belt) is an advantage
• Knowledge of ISO 9001:2015 Quality System and Working knowledge of Supplier and Process
• Good communication and interpersonal skills.
• Training and/or certification as Certified Quality Engineer (CQE) will be an advantage.

Work Location: 452 Alexandra Road, Singapore 119961

----------------------------------------------------------------------------

Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).

At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.

COMPANY OVERVIEW:

Celestica (NYSE, TSX: CLS) enables the world’s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development – from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud.

Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.

Celestica would like to thank all applicants, however, only qualified applicants will be contacted.

Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

• Assist in new tender process, take off quantities for tender
• Main contract and Sub-contract administration
• Settle VO with client and consultant, attend project meetings
• Request for Quotation (RFQ)
• Post-tender measurement
• Prepare project budget & costing/S-Curve monitoring
• Prepare main contract progress claim and site evaluation
• Settle contractual issue with client, consultant and sub-contractor
• Settle final account with client, consultant and sub-contractor
• Provide support to project division on anything related with Quantity and Cost
• Assist in project management, compiling project reports and documents filing.
• Degree in Quantity Survey / Civil Engineering / Building Construction or equivalent
• 2 years of working experience in construction industry
• Good interpersonal and communication skills
• Independent, proactive, resourceful, results-oriented and with a good eye for details

Job description

· Responsible for the planning, management, and coordination of the MEP Subcontractors testing & Commissioning activities.

· Ensure that the required tests and inspections are performed in accordance with the approved plan.

· Follow-up with subcontractors to resolve any deficiencies that are found.

Job requirement

· Minimum of 10 years engineering experiences in construction industry with relevant diploma.

· Minimum of 5 years construction experience for similar size complexity projects & complexity projects.

Job Description

a) Report to the Manager/Team leader as shown in the organization chart. Responsible for the coordination and control of technical matters, quality implementation and site supervision works.

b) The detailed duties and responsibilities includes but not limited to the following:

i) Coordinate with all the parties including sub-contractors and consultants to solve and coordinate technical issues, production of drawings and ensure proper transmission of data to all parties involved. Ensure that the detailed schedules of drawing production and site progress are met.

ii) For quality management, the coordinator is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

iii) Supervise site works according to the quality and EHS requirements.

iv) Handle all inspections and handing over process with the final objective of achieving customer satisfaction and high Conquas/QM score.

v) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirement

- Degree in Architecture / Engineering

- Minimum 2-3 years' experience in BIM Drafting (Architectural or M&E)

Job Description

a) Report to the Project Manager. Responsible for the EHS systems and implementations.

b) The detailed duties and responsibilities includes but not limited to the following:

i) Assist and advise the Project Manager on EHS planning for overall project scope and detailed activities.

ii) Study and fully understand the requirements of company ISO, EHS and sub-contracts agreements.

iii) Liaise, handle and keep proper records in dealing with all related authorities in complying with their respective requirements.

iv) Conduct regular site audits to ensure compliance with EHS requirements. He is authorized to take necessary actions including issuance of partial stop work order as he and the Project Manager deem fit.

v) Handle all accident and incident reports.

vi) Work as a team with project team members and sub-contractors to provide a safe working environment.

vii) Prevention of fines, imposition of demerit points and SWO from the authorities or owners like MOM, NEA and HDB is a key role which is also a key performance measurement of WSHO cum ECO.

viii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirement

- Certified NEA, ECO, ECO, ECMO

- At least 3-5 years' on-site experience

• Reports directly to QA manager
• Develope Quality Manual
• Conduct in-house quality training
• Lead and guide site staff and contractors to achieve qulaity workmanship
• Conduct preiodic site survelliance with QA Supervisors
• Prepare inspection test plans
• Collate and report non conformanaces
• Attend site consultant/ coordination meetings
• Produce progress reports
• Mininum 4 years experience in related field
• Understands the requirement and criteria of CONQUAS 21; preferbaly with exposure to Quality Marks inspection procedure and preparation
• Conduct defect investigation and identification
• Proficient in Microsoft Office; Excel/ Words/ Powerpoint
• Good command of English
• Selt motivated
• indepentent

Responsibilities:

· Coordinating, planning and conducting the project plan

· Project formulation and monitoring progress and schedule

· Effective communication and co-ordination between project participants

· Attend site meeting, inspect, monitor and report project progress.

· Submit and update monthly project status

· Perform other duties or tasks as assigned by immediate superior or Project Manager

Requirements:

· Degree in Civil/Structural Engineering or its equivalent

· At least 3 years relevant working experience as Project Engineer in main contractor office

· Proficient in MS Office Word, Excel and Project Scheduling software

· Bilingual with good communication skills

Job Description:

· Advise management on EHS legal and other requirements,, including their changes.

· Ensure provision in legal requirement such as WSH Act and WSH (Construction) Regulations are complied with.

· Review company’s safety performance and formulate measures to achieve continuous improvement.

· Review company safety resources and provide recommendations to management to meet EHS requirement.

· To arrange with senior management and laisse with projects to conduct monthly safety site walk.

· Fulfill any additional responsibilities assigned by the Project/Site Manager.

Requirements:

· Accredited WSHO and ECO with a minimum of 5 years of experience in the relevant field.

· Possess a Diploma in Engineering or Environmental Health and Safety.

· Demonstrated proficiency in organizational, interpersonal, and leadership skills.

· Capable of leading WSHOs, offering supervision, guidance, and instructions to all safety personnel.

· Sound understanding of government regulations pertaining to Occupational Safety, Health, and Environmental domains.

· Well-versed in OSH/ISO documentation.

• Project lead experience in actual projects
• Facilitating BIM Coordination meeting
• Planning BIM processes
• BIM Legal and Contractual issues
• Organisation's adoption plan

Job requirement

• BIM quality check
• BIM authoring tool
• BIM design review
• BIM analysis tool
• BIM Coordination tool
• Project workspace
• BCAA specialist diploma