RESPONSIBILITIES:

• To advise management on relevant Acts & Legislation pertaining to environmental and health
• Monitor to air, water (ECM) noise pollution, waste management and vector control issues
• Liaise with license pest operator or agent
• To monitor noise readings and advise management accordingly
• To conduct regular site inspection, particularly on ECM, perimeter drainage system, silt facilities, poor housekeeping that will encourage pest breeding, workers living and cooking condition, sanitary facilities etc.
• Together with health supervisor to discuss findings & recommend measures to the occupier to correct non-compliances and verification of action taken
• Prepare fortnightly report to management on Environmental control
• To act according to what is stipulated in the company’s environmental programme, conduct review and make recommendation for improvements
• Conduct investigation on industrial diseases, pest infested area and implement measure to stop its spread & prevent recurrence
• To liaise with relevant authorities on environmental & health issues
• Implementation of departmental procedures to comply with ISO 9001; 14001; OHSAS 18001 standard requirements, documented procedures as well as client, companies, authorities’ requirements
• Any other related duties assigned by superior from time to time

Requirement:

• Must be registered with NEA

School of Physical and Mathematical Sciences (SPMS)

Nanyang Technological University, Singapore

Associate Prof / Full Professor in Optimization, Control, and Scientific Computing

Young and research-intensive, Nanyang Technological University (NTU Singapore) is ranked among the world’s top universities. The College of Science seeks a diverse and inclusive workforce and is committed to equality of opportunity. We welcome applications from all and recruit on the basis of merit, regardless of age, race, gender, religion, marital status, family responsibilities, or disability.

The School of Physical and Mathematical Sciences at NTU offers multidisciplinary academic programs that provide students with a wide-ranging and up-to-date education. They offer undergraduate training leading to BSc (Hons) and graduate training leading to MSc and PhD degrees.

We invite applications for an Associate / Full Professor position specializing in Optimization, Control, and Scientific Computing. We are looking for world-class candidates with expertise in the computational aspects of algorithmic design and a strong focus on applying these skills to real-world problems. The successful candidate will be expected to teach both undergraduate and postgraduate courses in applied mathematics, conduct high-quality research in computation-specific areas of optimization and its interactions with other domains, such as scientific computing and scientific machine learning, and promote interdisciplinary collaboration among the disciplines of mathematics, computer science, and engineering. Candidates with strong academic portfolios are encouraged to apply. We are particularly interested in candidates who have extensive experience in consulting and collaborating with data-related industries such as AI and cloud computing.

The candidates are expected to:

· Establish a world-class research programme.

· Enhance the College’s visibility as an international leader in education and research.

· Secure research funding from competitive grants and industry partnerships.

· Mentor and supervise graduate students and postdoctoral researchers.

· Collaborate with interdisciplinary teams within the university and with external partners.

· Deliver engaging and effective teaching to both undergraduate and graduate students.

· Undertake essential administrative responsibilities within the Schools.

Requirements:

· PhD in mathematics or a related subject.

· Strong research record and relevant publications in reputable peer-reviewed international journals and conferences.

· A good track record of supervising research staff, postdocs, students, and interns in relevant fields

· Experienced in cross-disciplinary research initiatives and collaboration.

· Demonstrated excellence in research, evidenced by a strong publication record in reputable journals

· Recognition in the research community, such as invited talks, awards, or memberships in professional societies.

· Proven ability to secure research funding.

Application Procedure

Required application documents:

· Cover letter.

· Curriculum Vitae, including a full publication list.

· Statement of current and future research interest.

· Teaching statement.

· Names of at least four referees.

For any enquiries, please contact Bernhard Schmidt, [email protected].

School of Physical and Mathematical Sciences (SPMS)

Nanyang Technological University, Singapore

Associate Prof / Full Professor in Optimization, Control, and Scientific Computing

Young and research-intensive, Nanyang Technological University (NTU Singapore) is ranked among the world’s top universities. The College of Science seeks a diverse and inclusive workforce and is committed to equality of opportunity. We welcome applications from all and recruit on the basis of merit, regardless of age, race, gender, religion, marital status, family responsibilities, or disability.

The School of Physical and Mathematical Sciences at NTU offers multidisciplinary academic programs that provide students with a wide-ranging and up-to-date education. They offer undergraduate training leading to BSc (Hons) and graduate training leading to MSc and PhD degrees.

We invite applications for an Associate / Full Professor position specializing in Optimization, Control, and Scientific Computing. We are looking for world-class candidates with expertise in the computational aspects of algorithmic design and a strong focus on applying these skills to real-world problems. The successful candidate will be expected to teach both undergraduate and postgraduate courses in applied mathematics, conduct high-quality research in computation-specific areas of optimization and its interactions with other domains, such as scientific computing and scientific machine learning, and promote interdisciplinary collaboration among the disciplines of mathematics, computer science, and engineering. Candidates with strong academic portfolios are encouraged to apply. We are particularly interested in candidates who have extensive experience in consulting and collaborating with data-related industries such as AI and cloud computing.

The candidates are expected to:

· Establish a world-class research programme.

· Enhance the College’s visibility as an international leader in education and research.

· Secure research funding from competitive grants and industry partnerships.

· Mentor and supervise graduate students and postdoctoral researchers.

· Collaborate with interdisciplinary teams within the university and with external partners.

· Deliver engaging and effective teaching to both undergraduate and graduate students.

· Undertake essential administrative responsibilities within the Schools.

Requirements:

· PhD in mathematics or a related subject.

· Strong research record and relevant publications in reputable peer-reviewed international journals and conferences.

· A good track record of supervising research staff, postdocs, students, and interns in relevant fields

· Experienced in cross-disciplinary research initiatives and collaboration.

· Demonstrated excellence in research, evidenced by a strong publication record in reputable journals

· Recognition in the research community, such as invited talks, awards, or memberships in professional societies.

· Proven ability to secure research funding.

Application Procedure

Required application documents:

· Cover letter.

· Curriculum Vitae, including a full publication list.

· Statement of current and future research interest.

· Teaching statement.

· Names of at least four referees.

For any enquiries, please contact Bernhard Schmidt, [email protected].

Job Description:

1. Performing general inspection of parts and products at the Incoming/In-Process/Outgoing gate.
2. Generate Standard QA/QC inspection report.
3. Administrative tasks.
4. Logistics support.

Competence Requirements

• Preferred Secondary, NTC certification holder from related CNC/Fabrication industry.
• Preferably with 2 years of related work experience in manufacturing environment for non-technical trained staff.
• Able to read part drawing, usage of measuring equipment are added advantage.
• Computer competency.

Job description

Our Office Location : 2 Seraya Place, Jurong Island, Spore 627857

1 Responsibilities

• Establish, develop, update and maintain the QEMS system and work with respective stakeholders to develop and revise procedures (ISO 9001:2015).
• Monitor & analyze trends and quality performance.
• Manage the certification and audit of the Company ISO (ISO 9001:2015 internal and external audits) to ensure all ISO 9001 and relevant certifications’ objectives and requirements are met.
• Manage and ensure internal and external audit comply to QEMS requirement. This includes maintaining accurate records and coordination of initiatives improving QEMS.
• Effectively communicate the QA strategies, processes, and needs across organization through quality programs and campaigns.
• Participate in customer audit, lead investigations of quality issue with customers and internal stakeholders and follow up the CAPA action items to resolve all customer feedbacks / complaints.
• Inculcate and promote a culture to deliver high standard of quality in services rendered to customers.
• Responsible for managing Supplier / Vendor management on-boarding, improvements based on non-conformities, supplier audits and KPI’s.
• Support internal stakeholders on Management of Change.
• Liaise, fulfill, monitor and update customer on their KPI and other requirements.
• Responsible for monthly quality management review meeting and other quality performance reports where required by Management.
• Inspect Warehouse, Drumming including Transport & Yard areas and processes to ensure compliance with quality standards.
• Conduct training on ISO 9001 requirements, quality awareness and quality related issues.
• Contribute to any other projects assigned by the Line Manager.

2 Requirements

• Diploma or Bachelor’s degree from an accredited institution in relevant Quality, Science or Engineering studies.
• ISO 9001:2015 lead or internal auditor certificate from accredited institution would be an advantage
• Minimum 3-5 years of working experience in the quality function preferably in chemical, manufacturing, or logistics industry.
• Demonstrate strong leadership skills with at least 3-5 years’ experience in leading a quality team.
• Experienced in improving, maintaining and drives implementation and compliance of ISO 9001 management system would be an advantage.
• Experienced in customer / supplier quality management would be an advantage.
• Positive can-do attitude and self-initiated with strong sense of job ownership.
• Innovative problem-solver and believes in continuous improvement.

Authorities and Responsibilities

1. Ensure all fabrication work is done with acceptable quality by daily monitoring include inspecting according to specification, procedure and applicable standards.
2. Understand all technical specification and standard compliance and ability to handle troubleshooting project correction.
3. Prepare welding methods, PQR assembly and other CWI duties.
4. Co-ordinate, communicate with member even carrying out inspection of all the welding and associated actions in accordance with the approved Welding Procedure Specification, drawings and Company Specification and requirements.
5. Co-ordinate and liaise with Production personnel to ensure that all inspection stages comply to inspection and test plans on material or structure.
6. Witness and verify all tests include reinstatement etc. and prepare reports after such tests are conducted.
7. Verify product identification through material verification inspection and periodical random checks on site.
8. Responsible in executing directives as set forth for the Quality Assurance Department in meeting management objectives in term of quality control/assurance of all production fabrication works/projects.
9. Implement and maintain a system of auditing the facility and periodic calibration of test, measuring equipment and tools include all documentation, procedure qualification records accordance to customer specification and code.
10. Manage and supervise a team of inspectors / technicians in meeting departmental quality goals and production schedule.
11. Manage customer complaints, corrective and preventive action programs and Administer and manage continuous improvement program for all QA processes.
12. Work closely with customers, production and suppliers to meet the quality requirements.
13. Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
14. Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
15. Manage the implementation / schedule of calibration control.
16. Participate in the implementation of risk assessment and risk control of medical devices.
17. Any other tasks and responsibilities assigned from time to time.

Competence Requirement

• Min. ITE-NTEC/Diploma/Degree level PE/ME or its related discipline.
• Fresh Degree or min 3 years in Quality Assurance in production/fabrication/welding environment or it relevant experience in QC/QA environment.
• Perform CMM programming, smart-scope and QC measuring tools/equipment.
• Certified with welding certification by American Welding Society, Certification Welding Inspector, AWS-CWI. - Optional
• Minimum 3 years of related experiences in welding capacity in structural fabrication.
• Able to interpret technical drawings and reading symbols.
• Understand the quality principles, standards, internal business systems and processes.
• Good interpersonal skills, ability to communicate and Works well with all levels of staff and technically competent.
• Good knowledge of International Codes and Standards (ASME, AWS, ASTM, API).
• Basic Knowledge and usage of Microsoft Office
• Sound Technical knowledge on steel structural and steel fabrication procedures and welding inspection.
• Basic knowledge of ISO 9001 and OHSAS 18001 Management system

Responsibilities:

• Oversees project costing, budget allocation, expenditure monitoring and cost forecasting
• Reviews the project revenue update and project cash flow
• Oversees Change Order Management and Claims with clients, vendors and subcontractors
• Ensures timely commercial and cost reporting
• Reviews and evaluates vendors and subcontractors CBEs
• Coordinates with respective stakeholders for payment milestone requirements

Requirements:

• Bachelor’s Degree in any Engineering disciplines
• Minimum 5 years of relevant experience as project control manager
• Possess good communication and interpersonal skills

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

Tuas Yard

51 Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thu: 8:00am – 5:15pm

Fri: 8:00am – 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

● Oversee day-to-day site activities of areas of responsibility ● Ensure that work is carried out according to the drawings and specifications ● Supervise a team of workers ● Ensure that work progresses according to schedule ● Liaise with subcontractors and authorities ● Attend meetings with consultants and subcontractors ● Conduct project monitoring to ensure quality construction and safety ● Adjusted work schedules as needed in order to meet all project deadlines planned • Carry out inspection work with RE/RTO to ensure work done in order • Coordinate and supervise the subcontractors for the assigned site activities to meet schedule and ensure quality control of the work • Monitoring and controlling unnecessary wastage of resources •Inspection work finishing and ensure specifications are met

Responsibilities:

• Assist site manager/project manager in supervising daily activities on the construction site, ensuring that work is carried out efficiently and according to project plans and schedules.
• Monitor and track the progress of civil and structural work to ensure adherence to project timeline.
• Ensure compliance with safety regulations and enforce safety protocols.
• Ensure that civil and structural construction activities comply with environmental regulations and permits.
• Supervise and coordinate the activities of construction workers, subcontractors, and vendors involved in the installation process.
• Oversee daily site operations to ensure work is completed efficiently and on schedule.
• Assist in development and implementing of civil and structural construction plans, schedules and budgets.

Responsibilities:

• Assist site manager/project manager in supervising daily activities on the construction site, ensuring that work is carried out efficiently and according to project plans and schedules.
• Monitor and track the progress of civil and structural work to ensure adherence to project timeline.
• Ensure compliance with safety regulations and enforce safety protocols.
• Ensure that civil and structural construction activities comply with environmental regulations and permits.
• Supervise and coordinate the activities of construction workers, subcontractors, and vendors involved in the installation process.
• Oversee daily site operations to ensure work is completed efficiently and on schedule.
• Assist in development and implementing of civil and structural construction plans, schedules and budgets.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Description

Your main responsibilities will be:

• To carry out different machining operations on CNC & Conventional machines according to drawings, procedures and specifications
• To be involved in continuous improvement and optimise work processes

Job Requirements

What do you need from me?

• Previous experience on CNC and Conventional machines with an understanding of machining principles
• Ability to read production drawings
• Understand and Primarily Operate CNC Control systems
• Mill turning techniques
• Set and Run various CNC Machines & conventional machines.

Job Description & Requirements

• Monitor and manage day-to-day operations of projects, or function, including developing and monitoring budgets, coordinating activities with other sub-contractors
• Plan the work schedule and efficiently organize the site facilities in order to meet an agreed program of deadlines
• Liaise with consultants and/or sub-contractors engaged on the project
• Attend regular meetings with owner/client/contractors/sub-contractors and ensure the progress is on schedule
• Resolve any unexpected technical difficulties and other problems that may arise
• Monitor and ensure subcontractors comply with specified requirements
• ldentify and comply with all applicable statutory regulatory requirements related to project
• Identify possible risks to project and stakeholders as well as create contingency plans to mitigate these risks
• Respond swiftly to work delays, emergencies and other problems
• Clear communication to external parties including client, subcontractors, consultants, vendors etc. on project needs, requirements and schedule by means of daily construction oversight
• Review all method statement of the activities ensuring safe execution and maximization of resources used for job efficient
• Prepare monthly site report updating the latest progress and planning to achieve the project milestone
• Complete task as assigned by Project Manager and Project Director

Requirement:

• Candidate must possess at least Bachelor's Degree in Civil Engineering
• At least 10 years of engineering experience in the related field is required for this position
• At least 5 years of experience in managing civil and infrastructure construction work for projects of similar scale, complexity and nature of work
• Work as Team leader, leading team on project requirements and target achievement
• Acting as rigorous preson on Identify possible risks in project

We are the concentrate team in PepsiCo working across the Beverage, Nutrition and Snacks categories to deliver concentrate for many of PepsiCo’s mega brands including Gatorade, 7Up and Pepsi. We are at the heart of PepsiCo products, sourcing ingredients to manufacture more than 1,200 recipes for our brands. We are a global organisation, situated in 17 locations across 11 countries offering careers in various functions from Manufacturing, Supply Chain, Procurement, Quality, Finance, R&D, HR and IT. We want team members who can collaborate in our fast paced global organisation and are passionate about creating and delivering much-loved household brands to markets across the world.

The Technical Function is our team of enabling experts offering knowledge and partnership to functions on specialist subjects including engineering, quality and productivity. They ensure operations and food safety excellence for our team. Could you bring a new dimension to our technical expertise? If so we could take your talents to a whole new level.

This role requires supporting Quality Control requirements for finished goods as part of the QC team. Specific responsibilities can be expected to rotate between the finished goods and raw materials laboratories.

Kindly note that this role will require AM & PM shift work. AM shift timing is 7.30am to 4pm & PM shift timing is 3.30pm to 12 midnight. Transport will be provided.

Responsibilities:

• Responsible for the daily laboratory planning, prioritization and analysis of in-process and / or finished product samples in accordance to documented testing methodology.
• Provide accurate and timely disposition of Flavour Raw Materials and Finished Concentrates in accordance with the Company's accept/reject criteria.
• Ensure all instrumentation used in the testing of products are validated and calibrated to standard.
• Ensure all laboratory records are kept in accordance with the Company's protocol.
• Compile and report relevant KPI's monthly to Lab supervisor. Implement quality initiatives and quality strategic initiatives appropriate to level.
• Responsible for blocking and communicating any batches rejected or placed on-hold to operations and raise relevant Trackwise record for follow-up.
• Complete quality activities in the introduction of new product. Trouble shoot issues and carry out bench scale investigations where required.
• Analyse the data/trend and challenge non-value-added activities to streamline the Lab operations.
• Adhere to PepsiCo Health and Safety requirements.
• Ad hoc duties or projects as assigned by Lab supervisor.

Qualifications:

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree in Food Science, Microbiology or Equivalent.
• Computer literate
• At least 3 years work experience in a relevant field.
• System and operational knowledge - SAP, LIMS systems and Gas Chromatography, HPLC operational and troubleshooting experience is an added advantage.
• An understanding of GMP/GLP and other key manufacturing processes
• Ability to planning, manage priorities and deliver results to meet internal customer requirements.
• Experience in building excellent working relationships with operations team members
• Good Communication Skills across all levels in an organization.
• Good Attention to detail
• Self-starter, proactive in delivering results and a good organizer
• Strong Team Player

- Willing to work under the sun and overtime, weekend or holiday, shift switching and able to work under pressure and condition such as not afraid of dirty, not afraid of tired.

- Willing to work as a Construction worker, can do the timber, rebar job, able to work at project site, structural work.

- Able to operate of machine, can use construction machine, knowledge of construction safety. Experience in operating equipment like trench rammers , drills, pneumatic hammers. Knowledge of mixing and pouring constructin material (concrete, sand, grout & etc...).

- At least 10 years of experience in construction industry. Manage site activities, vendors and sub-contractors，assist the Project Manager in the daily execution of work. Attend meeting, coordination, prepare works schedule & site supervision.

- Ensure installation is carried out as per construction drawings & ensure that works are executed within an acceptable standard of workmanship.

- Responsible for all aspects of site safety, proven experience as construction worker, reduce material wasting and cost saving.

- Knowledge of basic engineering and construction principles and methods, be bilingual, fluent in English & Chinese / Bangladesh.

- Any other assigend duties.

Duties & Responsibilities:

1. The Construction Manager shall play a key role in the conceptual development of the various construction projects and oversee its organization, scheduling, and implementation
2. He/She will be required to plan, lead and monitor progress and performance against the project plan whilst managing the day-to-day operational aspects of projects which includes manpower planning, construction progress monitoring, preparation of master schedule and cost control
3. Responsible for cost management to manage projects within approved budgets, include materials, manpower and machinery cost control for new and running projects
4. Responsible for exercising timely instructions to deal with the results of delays, or emergencies at construction project sites
5. Reviewing manpower planning and monitoring of work schedules to ensure orderly delegation of jobs and smooth operation. Ensure to exercise effectively safe and economical methodology and enforces project standards
6. To maintain close collaboration with Project Managers, Architects, Engineers and all stakeholders to minimise errors in the process to achieve smooth completion of projects
7. To liaise closely with clients, consultants, sub-contractors, relevant authorities and developers in resolving site issues and authorities compliance issues

Requirements:

1. 10 years relevant working experience within the Construction industry
2. Should possess a minimum qualification of Degree in Engineering or Architecture or equivalent qualification
3. Ability to prioritize tasks well and able to work independently
4. Able to work under stress and complete tasks within set deadlines

PRINCIPAL ACCOUNTABILITIES

SQP oversees critical and non critical supplier mainly mechanical parts in. SQP is responsible in leading before and after FAS (First Article Submission) qualify and monitor quality performance of new / existing suppliers and ensure uninterrupted supplies of materials and services. He/ She should be able to foster close relationships with suppliers and partners and be able to communicate their value to the company.

JOB RESPONSIBILITIES

1. Lead and Drive First Article Submission for new and existing supplier

Supplier Quality Professional develop Quality plan such as Process Flow Diagram (PFD), Manufacturing Process Plan (MPP) & Inspection Test Plan (ITP) to new supplier. Perform supplier audits such as QMS, Process and HSE. This will involve visit/audit and assessing their capability and FAI. SQP shall work with Sourcing and Engineering, to engage and educate suppliers/sub-contractors.

2. Lead quality performance review

Worked closely with suppliers, to monitor conduct audit for vendor performance. Conduct in process audit and drive for closure of audit findings and continuous improvement and reduction of COPQ (Cost of Poor Quality). Lead the discussion with the suppliers and ensure timely response is executed to deliver result to our internal customers. Guide Procurement and team for supplier performance review process.

3. Supplier Development.

SQP shall drive for vendor development, identify and develop new special process to meet turnkey objective and reduce leadtime of supplier.

4. Analyse supply market.

SQP shall propose and execute creative ways to improve supplier process which creates financial value to the organization.

5. Maintain good relationship with stake holders and customer/s

SQP maintain good relationship with stakeholders such as Manufacturing, Procurement, Engineering and Quality. Work with cross functional teams in resolution of process and quality issues related to design, application and manufacturing process. Develop quality consciousness and impart application of quality tools such as FMEA, 8D.

6. Develop Product Quality Control Plan

SQP shall also be in charge in developing Quality Control Plan according to the requirements of the customer. He/She shall ensure that required processes and documentations and surveillance points are identified in the QCP. He/She shall liase closely with the customer during development of the new QCP and revision of the existing QCP and its approval (internal and Customer).

7. Customer /Third Party Inspection coordinator

SQP shall manage Customer and Third Party inspection of products/parts. He/She shall ensure that each Quality Control Plan activity which requires surveillance points are monitored and conducted accordingly. He/She will liase and communicate closely with the internal and external customers to ensure that TPI inspections are executed according to the plan schedule.

8. Perform any ad-hoc duties as and when assigned by the superior.

9. All employee of Completion Products Pte Ltd shall observe the highest standards of ethics and integrity in undertaking purchasing activity and act in a honest and professional manner that supports the standing of Completion Products Pte Lts core value.

10. Ensures 5S is implemented in the work area.

11. Adheres company’s guidelines with regards to Safety and Quality.

12. Complies to Company Code of Business Conduct.

13. Support and participate in company-wide or departmental programs such as:

· Total Quality Management, Lean Manufacturing

· Social Activities

REQUIRED COMPETENCIES

1. Must complete minimum training required specified in Employee Qualification and OJT Form No. S 1-026F.

2. Ensures Accountability – holding self and others accountable to meet commitments

3. Decision Quality – making good and timely decisions that keep the organization moving forward. Good decisions that are a mixture of analysis, wisdom, experience and judgement.

4. Customer focus – Building strong customer relationships and delivering customer-centric solutions.

5. Drives Result – consistently achieving results, even under tough circumstances. Results might be quantifiable – measured in terms in P&L, sales growth, customer satisfaction ratings, new product launched. Qualitative result -- an enhanced reputation among customers, a more vibrant brand that attracts customer and employee talent.

QUALIFICATION GUIDE

1. Education : Minimum Degree in Technical/Engineering course preferably Mechanical

Engineering

2. Communication : Fluent both in oral and wriiten English communication

3. Experience : Minimum 5 years of working on the same field . Experience in Oil and Gas

manufacturing is an advantage.

Purpose:

Responsible for performing the final inspection of assembly products to meet Customer's quality standards.

Key Area of Responsibilities:

· Perform In-process and Final Inspection for assembly tools and loose assembly modules to meet the requirement as defined on drawing, WI and any related documents.

· Initiate Material Review Board (MRB) review when part or assembly is not according to requirement as defined on drawing, WI and any related documents during in-process inspection.

· Update outgoing inspection record after Final Inspection to allow monitoring of the internal quality.

· Raise Non-Conformance Report (NCR) for non-conformance found to ensure reject is recorded.

· Support and participate in company continuous improvement program.

Qualification & Experiences:

· Nitec/Higher Nitec/Diploma in Mechanical Engineering/Electrical Engineering/Mechatronic Engineering or equivalent course

· Preferably with Workplace safety & health in Metal work certification

· Knowledge on quality inspection and buyoff

· No experience are welcome

OB DESCRIPTION

Job Title

Quality & HSE Engineer

Occupation

QUALITY CONTROL ENGINEER

Job Description & Requirements

ompany Description

XPAC TECHNOLOGIES PTE LTD is a packaging company based in Singapore. Our company provides packaging solutions for a variety of industries from pharmaceuticals, aviation and electronics. We pride ourselves on being a one-stop solution provider that offers a wide range of packaging options to meet our clients' needs.

Role Description

This is a full-time on-site role for a Quality Assurance Engineer. The Quality Assurance Engineer will be responsible for executing test cases, and ensuring the quality of the products that we deliver to our clients. The position is located in Singapore.

Qualifications

• Experience in Test Execution and Quality Assurance
• Experience in Manual Testing and Test Case creation
• Knowledge and experience of Principles and Processes such as ISO 9001, ISO14001 and bizSAFE
• Excellent analytical and problem-solving skills
• Ability to work as part of a team
• Excellent written and verbal communication skills
• Diploma in Logistics & Supply Chain Management or Mechanical Engineering with HSE background
• Minimum of 2 years working experience in the relevant industry

Seeking a driven and fit personnel. The candidate will be reporting to the Manager and supervising all functions of pickup and delivery in Qxpress.Candidates are preferred to have a minimum of 1 year of working experience in the relevant field. All other candidates will also be considered if shown keen interest in logistics work.

Job Responsibilities:

• Oversee and monitor last mile deliveries.
• Serve as the primary point of contact for addressing customer inquiries and concerns.
• Manage the processing of delivery returns from drivers and customers.
• Ensure that key performance indicators are achieved set by supervisor or manager.
• Ensure adherence to safety protocols and standard operating procedures.

Job Requirements:

• Minimum of 1 year(s) of working experience in relevant field, candidate who shown keen interest in logistics work will also be considered.
• Must be physically fit.
• Strong time management skills.
• Meticulous and detail oriented.
• Ability to communicate with all partners via calls and emails.
• Ability to complete multitask within given timeline.
• Class 3 license will be an advantage.
• Singaporeans Only.

Remuneration:

• Basic Salary - $2100 (Probation) to $2300 (Confirmation)
• Performance Incentive: $300 monthly for good attendance & performance! (No lateness or absence)
• Tenure allowance - after 1st/2nd/3rd year anniversary of employment the employee is eligible for $150-$500/monthly tenure allowances
• Mobile Phone Allowance
• Meal Allowance for overtime more than 2 hours on top of normal working hours - $10
• Overtime pay eligible

Other information:

• 12 days annual leave
• 14 days sick leave/60 days hospitalization

Working Hours: 5.5 days/week

• Monday to Friday : 9am to 6pm
• Saturday : 9am to 1pm

Please submit your updated resume through the Apply Now link.

.Oversee all project activities, including cost management, project schedule, staff development, site safety and security

· Project management, coordination, implementation, execution, control, and completion of specific projects

· Manage project staff and provide direction and support to project team

· Perform project planning, budgeting, and identification of resources needed.

· Monitor’s timeline of all submissions to authorities and obtaining the necessary approvals/permits/certificates.

· Monitor the progress of the construction activities and hold regular status meetings with various stakeholders.

· Coordinate the efforts of all parties in meeting the project schedule and ensure that the project completes on time and within budget and quality standards.

· Regular inspection of construction sites to ensure compliance to quality and site safety.

· Delegate tasks and responsibilities to appropriate personnel

· Plan and schedule project timelines

· Constantly monitor and report on progress of the project to all stakeholders

· Present reports defining project progress, problems, and solutions

· Implement and manage project changes and interventions to achieve project output

· Identify and resolve issues and conflicts within the project team

· Determine the frequency and content of status reports from the project team, analyse results, and troubleshoot problem areas

· Coach, mentor, motivate, and supervise project team members and contractors and influence them to take positive action and accountability for their assigned work

· Ensure the smooth completion of the project

· Ad hoc assignments

Job Description

• Lead and prepare tender estimation. Prepare/check quantity taking-off, summarize quantities for each job sequence.

• Source suppliers & sub-contractors. Evaluate quotations. Ensure contractual compliance of tender submission.

• Perform full spectrum of contracts administration including quotation, costing, tenders and contract documentation.

• Work closely with and participate in project meetings with the project manager, finance team and other departments to coordinate the project budget and financial objectives.

• Pre-contract works including studying tender documents and drawings.

• Negotiate terms & conditions for contracts with the Clients, sub-contractors, etc.

• Prepare project cashflow.

• Monitor project expenditures to ensure that they are within the approved budget.

• Draft contracts/ agreements.

• Handle all disputes arises on issues related to contracts from clients / consultants / sub-cons/ partners.

• Manage the resources, budget and staffing of the Department of Construction of the Ministry of Commerce. Supervise the financial planning and monitoring of public works projects.

• Participate in the drafting of the project contract, ensure that the contract terms comply with the requirements of laws and regulations, and clarify the rights and obligations of both parties, especially the key terms such as the scope of the project, quality standards, construction period, payment method and liability for breach of contract.

• Track all project expenses, including labor, materials, and administrative expenses, provide real-time data on project costs, and prepare and update budget reports to keep project managers and stakeholders informed of financial status.

• Support the project team on planning, scheduling and co-ordination of various projects; monitor project progress, cost and cashflow.

• Negotiate for contractual variation, settlement of claims, progress payments and finalizing project accounts.

• Act as the primary point of contact for budget related inquiries and issues within the project team.

• Educate project team members on the importance of budget agreements, expense reporting, and budget compliance to foster team responsibility.

• Other duties as assigned by the management.

Job Requirements:

• Candidate must possess at least a Bachelor's Degree in Civil/Structural Engineering, Building/ Quantity Surveying.

• At least 4 years of working experience in the Construction Site

• Able to work in a team and support the tender manager/project manager in contract administration and cost control.

• On site-experience Marine, Wind Power Project is preferred

Job Info:

• Salary : Basic up to $9000 + VB
• Working Hours: Monday - Friday: 8:30am - 5:30pm
• Location: Pioneer (Company transport at designated pick up point)

Job Scope:

• Manage the full spectrum of accounting functions, including Accounts Receivables and Payables, Inventories, Fixed Assets, and General Ledger
• Provide assistance with SAP and IT accounting system issues
• Take an active role in developing, reviewing, and improving current financial policies, procedures, internal controls, and systems, as well as updating SOPs
• Supervise a team of Accounts Executives

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Chou Jia Hooi | EA Personnel No.: R23115147

Responsibilities:

As the Food Safety and Quality Assurance Officer, you will be responsible for ensuring the highest standards of food safety, quality, and compliance with ISO22000 for our central kitchen, supermarket counters and trading business under the subsidiary company.

Your key responsibilities include:

1. Compliance Management:

• Oversee and implement food safety and quality management systems in accordance with ISO22000.
• Conduct regular internal audits and inspections to ensure compliance with all relevant regulations and internal standards.

2. Documentation and Reporting:

• Maintain accurate records of all food safety and quality assurance activities.
• Prepare comprehensive reports for management, summarizing key performance indicators and areas for improvement.

3. Training and Development:

• Develop and deliver training programs for operation staff at the central kitchen and supermarket counters on food safety protocols and best practices.
• Keep the team informed about updates in food safety regulations and industry trends.

4. Incident Response:

• Establish and implement effective procedures for handling food safety incidents and product recalls protocols.
• Conduct thorough investigations into any breaches of food safety standards and recommend corrective actions.

5. Supplier and Vendor Management:

• Collaborate with suppliers and vendors to ensure the quality and safety of raw materials used in our production processes.
• Evaluate and approve suppliers based on established criteria.

Qualifications:

• Certification in ISO22000.
• Proven experience in food safety and quality assurance, preferably in the sushi and sashimi production industry.
• Strong knowledge of local and international food safety regulations.
• Excellent communication and training skills.

Job Description:

1. Performing F.A inspection and inspection of parts and products with desktop measuring tools / CMM / Smart scope at the incoming / outgoing / in-process gate.
2. To prepare and generate standard inspection report and lead team in performing quality inspection.
3. Monitor on critical customer products, with a corrective and preventive action programs in managing customer complaints / improvement plans.
4. Administer and work on continuous improvement program in achieving good process control.
5. Provide technical guidance to group of inspectors.
6. Manage customer complaints, corrective and preventive action programs.
7. Work closely with customers and inter-department to meet the quality requirements.
8. Experience in calibrating measuring equipments.

Requirements

• Preferred to have NTC / Diploma in related engineering field.
• Required to know-how in using desktop measuring tools, and other equipment such as CMM, Smart Scope, Roundness Tester and Roughness Tester
• Computer competancy.