To support project manager and sales manager in adminstrative work

To help coordinate jobs

To help do quotations to customer

To help do service report for project manager

To help to reply email

To help sales manager to follow up on order and payment

Job Description

1. Assist in planning and creating schedules and project timelines.
2. Track deliverables, control subcontractors and suppliers to meet schedule, safety and quality objectives.
3. Attend all meetings including consultant, technical and subcontractor.
4. Resolve design site problems encountered during the construction period
5. Planning of housekeeping by coordinating responsibilities of site engineers / site supervisors and sub contractors.
6. Responsible for implementing the work plan of the Project Manager
7. Responsible for the execution and successful completion of the project
8. Ensure the efficient use of resources and cost effectiveness
9. Manages day-to-day operational aspects of a project and scope
10. Supervision and management of the project team

Job Requirement

1. Degree in Engineering (Civil and/or Structural) or Building equivalent recognized by PEB / BCA.
2. Minimum 10 years of practical working experience in local building construction industry, and 3 years experience as same position
3. Independent, positive attitude, self-motivated and responsible.
4. Good communication and interpersonal skills

Job Description

1. Assist in planning and creating schedules and project timelines.
2. Track deliverables, control subcontractors and suppliers to meet schedule, safety and quality objectives.
3. Attend all meetings including consultant, technical and subcontractor.
4. Resolve design site problems encountered during the construction period
5. Planning of housekeeping by coordinating responsibilities of site engineers / site supervisors and sub contractors.
6. Responsible for implementing the work plan of the Project Manager
7. Responsible for the execution and successful completion of the project
8. Ensure the efficient use of resources and cost effectiveness
9. Manages day-to-day operational aspects of a project and scope
10. Supervision and management of the project team

Job Requirement

1. Degree in Engineering (Civil and/or Structural) or Building equivalent recognized by PEB / BCA.
2. Minimum 10 years of practical working experience in local building construction industry, and 3 years experience as same position
3. Independent, positive attitude, self-motivated and responsible.
4. Good communication and interpersonal skills.

Job Description

1. Assist in planning and creating schedules and project timelines.
2. Track deliverables, control subcontractors and suppliers to meet schedule, safety and quality objectives.
3. Attend all meetings including consultant, technical and subcontractor.
4. Resolve design site problems encountered during the construction period
5. Planning of housekeeping by coordinating responsibilities of site engineers / site supervisors and sub contractors.
6. Responsible for implementing the work plan of the Project Manager
7. Responsible for the execution and successful completion of the project
8. Ensure the efficient use of resources and cost effectiveness
9. Manages day-to-day operational aspects of a project and scope
10. Supervision and management of the project team

Job Requirement

1. Degree in Engineering (Civil and/or Structural) or Building equivalent recognized by PEB / BCA.
2. Minimum 10 years of practical working experience in local building construction industry, and 3 years experience as same position
3. Independent, positive attitude, self-motivated and responsible.
4. Good communication and interpersonal skills.

Purpose of Position

• Provide maintenance and engineering support for process control systems to ensure safe and reliable operation of the plant.
• Provide technical and engineering support for projects and modifications related to control system to achieve business and operational objectives.

Principle Responsibilities

• Responsible for the maintenance and engineering of all process control systems which may be installed in the plant or externally at customers' site.
• Perform fine-tuning, troubleshooting, modification and programming of the Control System as needed to improve system performance and optimize process operation needs.
• Response to 24-hour emergency call-out and provide night-shift support during plant startup, shutdown and as requested by Operation Team.
• Work closely with the Instrument Team to troubleshoot and resolve instrumentation problems.
• Work with the Project Team to develop requirements and/or specifications of control system for projects and modifications; supervise & implement the project works according to the schedule and requirements.
• Plan and execute preventive and corrective maintenance works for plant turnaround.
• Perform strategy planning for control system expansion, upgrading and renewal.

Job Requirements

• Familiar and hand-on with the engineering tools and programming languages of control systems (Honeywell, Siemens PCS7 and Triconex), able to make program modifications and configuration changes confidently.
• Experienced and familiar with various phases of project works such as engineering, fabrication & construction and commissioning.
• Knowledge and experience with computer system networking, server/client and virtualization architectures.
• Degree in Electronics/Electrical Engineering, major in Control is preferred.
• Minimum 5 years relevant experience working and maintaining Honeywell DCS, Siemens PCS7, Triconex PLC and etc.

We are looking for Diesel Engine mechanic full time. must willing to hardwork and good knowledge and repair with tipper truck and 14ft lorries,road cutter, combactor and excavator machine servicing and maintance monthly. we looking for atleast 2 years experience and above. With diploma certificate and above. We prepard work at night and public holidays.

What a System Quality Program Manager does at HP:

Manage Quality Programs:

• Lead quality assurance programs from initiation through closure, ensuring alignment with project scope, goals, and deliverables.
• Oversee all aspects of quality program management, including planning, budget and resource control.
• Conduct System At Glance Test, Workflow Duration Test, and Continuous Regression Test.
• Support priority test projects with direction, maintaining relationships with internal stakeholders and sharing information with testers via standardized reports and regular stand-up meetings.

Collaborate with Cross-Functional Teams:

• Work closely with cross-functional teams to define program requirements, identify risks, and ensure successful project execution within defined timelines, resources and budgets.

Execute Quality Assurance Plans:

• Define and manage comprehensive test plans to ensure HP Print ecosystem integration quality.
• Oversee test coverage, schedules, and resource adjustments to meet program objectives.

Monitor and Analyse Quality Metrics:

• Track quality metrics to ensure compliance with HP’s standards, conduct data analysis to identify improvement areas, and drive continuous improvement initiatives.
• Lead Data-Driven Decision Making.

Facilitate Communication:

• Act as a primary quality contact for stakeholders, communicating program status, risks, and escalations effectively.
• Prepare and maintain QA-related documentation, including test plans, test matrices, and testing reports.
• Provide regular updates and insights to senior management.

Encourage a Culture of Innovation and Continuous Improvement:

• Promote a collaborative environment, integrating new technologies and quality methodologies, and driving process enhancements.

Individuals who do well in this role at HP, usually possess:

• Four-year Degree in Computer Science, Software Engineering, Information Systems, Information Technology, or any other related discipline or commensurate work experience or demonstrated competence.
• Typically has 0-1 years of work experience, preferably in software quality assurance, test harnesses and QA focused tools, or a related field.
• Good to have skills and knowledge: Agile Methodology, CI/CD, Computer Science, JIRA, Scrum (Software Development), Software Development, Software Engineering, Software Quality (SQA/SQC), Software Testing.
• Test Planning, Knowledge in Quality and defect management.
• Any certifications are a plus: Project Management Professional (PMP) Certification, Lean Six Sigma Certification or equivalent quality certifications, Certified Quality Engineer (CQE), Certified Software Quality Engineer (CSQE), Certified Software Quality Engineer, Certified Associate in Software Quality (CASQ), Certified Software Test Engineer (CSTE).

Sustainable impact is HP’s commitment to create positive, lasting change for the planet, its people, and our communities. This serves as a guiding principle for delivering on our corporate vision – to create technology that makes life better for everyone, everywhere.

HP is a Human Capital Partner – we commit to human capital development and adopting progressive workplace practices in Singapore.

Job Description & Requirements

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection.

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

.Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Title: DCS Engineer

Work Location: Jurong Island

Expected Start Date: 01 January 2025

Responsibilities for this position may include but not limited to:

• Provides engineering design, troubleshooting and maintenance of Distributed Control System (DCS)
• Troubleshoot day-to-day process problems related to process control applications, controller tuning and batch receipes execution
• Supports Process Hazard Analysis and implements process changes through a Management of Change Process
• Maintains up-to-date documentations for the DCS
• Conducts training programs for operators on DCS & Batch Receipes
• Initiates and manages DCS hardware life cycle, software and process control network upgrades
• Leads / supports development and execution of control system pojects, and greenfield projects

Required Qualifications

• Bachelor's Degree in Electrical / Electronics / Instrumentation and Control / Chemical from an accredited university
• Minimum 5 years of related work experience in DCS in the refinery, petrochemical or checmical industry
• Strong analytical / trouble-shooting skills
• Good interpersonal and communication skills
• Able to work independently in a team and in a diverse enviroment.

Preferred Qualification:

• Knowledge and work experience in Honeywell DCS System (TPS/EPKS DCS and Experion Batch)
• Knowledge in SQL Programming / Power BI, Process Controls Domain & Network adminstration.

Intersted candidates, do drop me your resume @ [email protected]

Roles & Responsibilities

· Coordinate with principals, sales, project team and clients to produce valued engineering design & construction documents.

· Strong knowledge of building/Façade systems

· Plan concept design by studying construction specifications and material details.

· Prepare 2D & 3D Detail Drawings with Autocad.

· Well organize design drawing sets.

· Obtain approvals from clients with concept drawings.

· Preparation of Shop, Construction and As-built drawings.

· Maintains technical knowledge by attending design workshops.

· Contributes to team effort by accomplishing related results as needed.

Requirements

· Degree in Engineering related to Construction sector.

· Well versed with Autodesk Autocad software.

· Good verbal, written and graphic communication skills.

· Able to communicate well in English.

· Self-motivated and enjoys contributing to highly collaborative teams

· Possess initiative & good working attitude

· Flexible and well-rounded to accommodate shifting schedules, project demands, multiple time zones, and deadlines.

Kindly indicate the following information in your CV

· Current / Last Drawn Salary (in SGD)

· Expected Salary (in SGD)

· Availability

· Residency Status in Singapore

Job Description:

· Developing and managing operational activities, including the monitoring of Workplace Safety and Health (WSH) strategies, and overseeing manpower, financial and resource plans.

· Day to day repair and maintenance job arrangement and yard operation management.

· Manage cost, quality and schedule, as well as health, safety and environmental activities for the site.

· Maximise productivity within the maintenance environment through sound scheduling and planning.

· Supervision the office team and review the job card and overtime to ensure all jobs are recorded and billed accordingly.

· Review invoices, quotation and efficiency of workers in perform their repair works.

Requirements:

· Minimum 2-3 years experience in heavy machinery industry.

· Technically background of Heavy machineries.

· Strong analytical and problem-solving abilities.

· Excellent communication and interpersonal skills.

Job Description:

· Developing and managing operational activities, including the monitoring of Workplace Safety and Health (WSH) strategies, and overseeing manpower, financial and resource plans.

· Day to day repair and maintenance job arrangement and yard operation management.

· Manage cost, quality and schedule, as well as health, safety and environmental activities for the site.

· Maximise productivity within the maintenance environment through sound scheduling and planning.

· Supervision the office team and review the job card and overtime to ensure all jobs are recorded and billed accordingly.

· Review invoices, quotation and efficiency of workers in perform their repair works.

Requirements:

· Minimum 2-3 years experience in heavy machinery industry.

· Technically background of Heavy machineries.

· Strong analytical and problem-solving abilities.

· Excellent communication and interpersonal skills.

-Use business network and support knowledge sharing sessions to explore new business opportunities.

-Contacting potential clients to establish a business relationship and meet with them.

- Maintain current client relationship and identifying areas for potential clients by understanding their needs and assisting with their queries.

-Collaborating with management on sales goals.

-Support the team with other responsibilities as required.

-Training provided.

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering with PEB recognition.
• Working experience in A1/A2 building companies is preferred.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering or equivalents.
• Miniumum 1 year of working experience in contruction industry.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Manage assigned projects.
• Prepare submission documents based on specifications.
• Coordinate with customers on technical issues, approvals, and schedules.
• Develop and deliver switchboard training materials.
• Compile material lists for switchboard orders.

Requirements:

• Diploma/Degree in Electrical Engineering or equivalents.
• Minimum 1year related working experience.
• Proficient in Microsoft Office, AutoCAD.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

About

This is a full-time on-site role for an Administrative Assistant at Len Meng Engineering & Construction Pte Ltd in Tuas.

Responsibilities

• Process, sort and distribute incoming mails internally in a timely manner
• Answering daily phone calls
• Sales Process eg: Quotation, Purchase Order, Delivery Order, Invoices
• Organizing and maintaining files
• Data Entry and Ad-hoc administration duties as required.

Requirements

• Min “N” Level with at least 2-3 years of relevant work experience in similar roles;
• Abilities organizational and time-management;
• Proficiency in MS Office;
• Phone Etiquette and Communication skills;
• Ability to multi-task and prioritize tasks

Benefits

• Company Transport provided from designated MRT Station

School of Physical and Mathematical Sciences (SPMS)

Nanyang Technological University, Singapore

Associate Prof / Full Professor in Optimization, Control, and Scientific Computing

Young and research-intensive, Nanyang Technological University (NTU Singapore) is ranked among the world’s top universities. The College of Science seeks a diverse and inclusive workforce and is committed to equality of opportunity. We welcome applications from all and recruit on the basis of merit, regardless of age, race, gender, religion, marital status, family responsibilities, or disability.

The School of Physical and Mathematical Sciences at NTU offers multidisciplinary academic programs that provide students with a wide-ranging and up-to-date education. They offer undergraduate training leading to BSc (Hons) and graduate training leading to MSc and PhD degrees.

We invite applications for an Associate / Full Professor position specializing in Optimization, Control, and Scientific Computing. We are looking for world-class candidates with expertise in the computational aspects of algorithmic design and a strong focus on applying these skills to real-world problems. The successful candidate will be expected to teach both undergraduate and postgraduate courses in applied mathematics, conduct high-quality research in computation-specific areas of optimization and its interactions with other domains, such as scientific computing and scientific machine learning, and promote interdisciplinary collaboration among the disciplines of mathematics, computer science, and engineering. Candidates with strong academic portfolios are encouraged to apply. We are particularly interested in candidates who have extensive experience in consulting and collaborating with data-related industries such as AI and cloud computing.

The candidates are expected to:

· Establish a world-class research programme.

· Enhance the College’s visibility as an international leader in education and research.

· Secure research funding from competitive grants and industry partnerships.

· Mentor and supervise graduate students and postdoctoral researchers.

· Collaborate with interdisciplinary teams within the university and with external partners.

· Deliver engaging and effective teaching to both undergraduate and graduate students.

· Undertake essential administrative responsibilities within the Schools.

Requirements:

· PhD in mathematics or a related subject.

· Strong research record and relevant publications in reputable peer-reviewed international journals and conferences.

· A good track record of supervising research staff, postdocs, students, and interns in relevant fields

· Experienced in cross-disciplinary research initiatives and collaboration.

· Demonstrated excellence in research, evidenced by a strong publication record in reputable journals

· Recognition in the research community, such as invited talks, awards, or memberships in professional societies.

· Proven ability to secure research funding.

Application Procedure

Required application documents:

· Cover letter.

· Curriculum Vitae, including a full publication list.

· Statement of current and future research interest.

· Teaching statement.

· Names of at least four referees.

For any enquiries, please contact Bernhard Schmidt, [email protected].