Duties and responsibilities:

Planning and organizing construction projects, including developing project timelines, budgets, and resource plans.

Ensuring that all construction work is carried out in compliance with building codes, safety regulations, and other legal requirements.

Managing project teams, including architects, contractors, and other stakeholders, to ensure that projects are completed on time and within budget.

Monitoring project progress and making adjustments as necessary to ensure that projects are completed on time and within budget.

Collaborating with architects and other stakeholders to develop project plans and specifications.

Developing and implementing quality control procedures to ensure that construction work meets the required quality standards.

Providing technical guidance and support to project teams, including architects, contractors, and other stakeholders.

Maintaining accurate project records and documentation.

Develop and manage project schedules, budgets, and resources

Coordinate with architects, engineers, and contractors to ensure project success

Review and approve project plans, specifications, and contracts

Ensure compliance with building codes, safety regulations, and environmental requirements

Monitor project progress and make adjustments as necessary

Communicate project status to stakeholders and senior management

Manage project risks and identify opportunities for improvement

Provide technical support to project team members

Ensure quality control and quality assurance for all project deliverables

Lead project meetings and facilitate communication among team members

Assist in the development of cost estimates

Assist the project team with site safety documentation and coordination

Assist the project team with closeout of the project

Assist project accountant with monthly subcontractor billings and pay applications

Assist project manager with assigned tasks

Requirement:

Bachelor's degree in Civil Engineering or related field

Minimum of 5 years of experience in construction project management

Strong knowledge of construction materials, methods, and regulations

Excellent communication and leadership skills

Ability to manage multiple projects simultaneously

Proficiency in project management software and tools

Experience in managing large-scale construction projects

Ability to read and interpret blueprints and construction plans

Knowledge of budgeting and financial management

Experience in managing and supervising construction teams

Strong problem-solving and decision-making skills

Job Description

• Review engineering drawings, specifications, and technical submittals to ensure alignment with project requirements.
• Collaborate closely with multi-disciplinary teams to integrate MEICA systems seamlessly into existing building design, ensuring compatibility and optimal operation.
• Conduct technical reviews of MEICA engineering designs and proposals, recommending improvements to optimise equipment constructability and efficiency.
• Develop MEICA construction plans, sequencing, resource allocation, and logistical considerations.
• Prepare cost estimates for MEICA components and services, considering design changes and project specifics.
• Provide technical leadership in the installation of MEICA systems.
• Oversee the entire MEICA construction process, ensuring strict adherence to technical specifications, industry standards, safety standards, and best practices.
• Supervise and mentor MEICA construction team, subcontractors, and vendors.
• Collaborate closely with the client / stakeholders, addressing technical inquiries and ensuring MEICA systems align with their operational requirements.
• Enforce strict safety protocols and industry regulations on the construction site.
• Provide regular project updates, technical reports, and installation strategies to clients and stakeholders.

Requirements

• Bachelor's degree in Civil, Mechanical or Electrical, or a related field.
• 15 years of experience in the planning and construction of waste to energy plants or major process industry / industrial / infrastructure projects.
• Proven track record as a MEICA construction manager in large scale projects, managing internal / external stakeholders – HSE, QA, Subcontractors, Suppliers, Client, Authorities.
• Proficiency in planning, scheduling, and resource management
• Ability to identify and address construction challenges and issues promptly.
• Excellent organizational and problem-solving skills, with the ability to prioritise tasks and manage multiple tasks simultaneously.
• Strong communication and interpersonal skills to collaborate effectively with various stakeholders.
• Demonstrated leadership abilities and the capacity to motivate and develop a team.
• Knowledge of safety and regulatory compliance requirements related to construction logistics.
• Flexibility to adapt to changing project needs and work in a fast-paced construction environment.
• Profound knowledge of MEICA systems and technologies.
• Excellent coordination skills and communication skills in English, both verbal and written.
• Ability to work with a diverse team.
• Ability to multi-task and be flexible/adapt to rapidly changing project requirements/timelines.
• Meticulous and analytical with excellent problem-solving skills.
• Able to work under tight deadlines.
• Highly motivated and ability to work independently with minimal supervision.

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Job Descriptions:

• Management of CAPA from tracking, including follow-ups and closure.
• Management of Change Control, Deviations, from tracking, follow-ups and closure.
• Review quality process control plan, drive quality issues to root cause, corrective actions and improvements.
• Perform, document internal audits and other quality assurance activities to ensure readiness on international standards certification audits and GMP inspection.
• Coordinate and assists during customer visits and audits.
• Create, review work instructions and standard operating procedures, devise sampling procedures and directions for recording and reporting quality data.
• Review the implementation and efficiency of quality and inspection systems.
• Collect, compile statistical quality data, and analyze data to identify areas for improvement in the quality system.
• Review of analytical reports, and batch records (manufacturing and packaging).
• Perform SAP QM setting, review test results, block / unblock of finished products.
• Manage customer queries, customer satisfaction surveys, and questionnaires and other quality / regulatory purpose documentation requests.
• Investigate customer complaints and non-conformance issues.
• Consolidate data to create the annual product quality review report.
• Track quality performance and initiate quality improvement plans.
• Perform risk assessments and monitor risk management activities at quality level.
• Conduct /perform training to employees to improve GMP / international standards certification awareness and compliance.
• Perform any other duties and responsibilities as assigned from time to time.

Job Requirements:

• Minimum 2 years related work experience
• Possess experience in internal audit, validation activities, training management and batch release for API with good background on cGMP

Job Description & Requirements

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection.

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

.Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

• Location: Tuas
• Work-Life Balance
• Yearly appraisals salary adjustment（Based on performance)
• Singlife Medical Insurance Benefits

Responsibilities :

• Prepare group consolidation, financial report and financial analysis.
• Prepare and submit of consolidated monthly financial reports.
• Oversee the accounts of subsidiaries companies within the Group to ensure timely monthly closing and reporting.
• Statistics / survey preparation and submission
• Provide accounting advice to colleagues and associate companies to ensure common application of accounting guideline, policies and procedures.
• Handle subsidiaries/associate companies in forecast reporting and in their management accounts process. Liaise with external auditors in annual financial audit and statutory reporting for the Group.
• Prepare Group’s annual budget and quarterly rolling forecast.
• Assist Accounts Dept in ad-hoc tasks as may be assigned.
• Review and approve WIP
• Analyse, prepare, explain, and submit Flash report to Directors/Shareholders
• Liaising with all auditors and tax agents

Requirements :-

• Degree/Diploma in Accountancy or equivalent professional qualification
• Minimum 5 years working experience in accounting, audit and/or handling group consolidation.
• Experience in ERP system implementation is a plus.
• Worked in accounting firm wuth an audit background is a plus.
• Ability to work independently with minimum supervision

*Only shortlisted candidates would be notified**

Responsibilities:

As the Food Safety and Quality Assurance Officer, you will be responsible for ensuring the highest standards of food safety, quality, and compliance with ISO22000 for our central kitchen, supermarket counters and trading business under the subsidiary company.

Your key responsibilities include:

1. Compliance Management:

• Oversee and implement food safety and quality management systems in accordance with ISO22000.
• Conduct regular internal audits and inspections to ensure compliance with all relevant regulations and internal standards.

2. Documentation and Reporting:

• Maintain accurate records of all food safety and quality assurance activities.
• Prepare comprehensive reports for management, summarizing key performance indicators and areas for improvement.

3. Training and Development:

• Develop and deliver training programs for operation staff at the central kitchen and supermarket counters on food safety protocols and best practices.
• Keep the team informed about updates in food safety regulations and industry trends.

4. Incident Response:

• Establish and implement effective procedures for handling food safety incidents and product recalls protocols.
• Conduct thorough investigations into any breaches of food safety standards and recommend corrective actions.

5. Supplier and Vendor Management:

• Collaborate with suppliers and vendors to ensure the quality and safety of raw materials used in our production processes.
• Evaluate and approve suppliers based on established criteria.

Qualifications:

• Certification in ISO22000.
• Proven experience in food safety and quality assurance, preferably in the sushi and sashimi production industry.
• Strong knowledge of local and international food safety regulations.
• Excellent communication and training skills.

Objectives of the position:

This role involves Customer Quality Support for LAP’s product distribution, addressing customer feedback and product quality requirements/issues. The person in this position will be responsible for handling customer feedback or requirements, such as complaints, test data, and other technical information as requested. This includes necessary communication with all stakeholders (Customer, Supplier, Customer Service, Production Planning, Supplier Management, Logistics).

Knowledge in cable testing or Electrical & Electronic (E&E) product testing, along with an understanding of technical specifications, will be required to comprehend customer complaints (both technical and logistical) and provide appropriate advice for resolution.

Key Responsibilities:

Manage Customer Complaint Processes

• Acknowledge the complaint
• Update the complaint in SAP & Customer complaint log
• Track the complaint & close the complaint once actions are completed
• Summarize complaints for monthly reporting (LOS & Q-reporting)
• Properly handle customers' needs by providing accurate and timely information on inquiries related to cable standards, test reports and complaint handling

Track Supplier Quality

• Conduct incoming inspections when required or prompted by customer complaints
• Update results in the SAP system and release inspected lots according to the defined usage decision
• Generate Supplier Corrective Action Requests (CAR) and track corrective actions by liaising with the supplier

Compliance with Standards

• Familiarize with and comply with international cable testing standards and procedures
• Contribute to achieving company and department KPIs through due diligence, duty of care, and personal accountability for quality assurance in all tasks

Liase with Stakeholders

• Effectively close customer complaints by liaising with relevant stakeholders

Maintain Records

• Maintain records in SAP and other relevant records

Operate Laboratory Test Equipment

• Operate laboratory test equipment when required for the validation of complaints

Assist with Customer Technical Enquiries

• Assist with product test reports, RoHS, REACH, and CE inquiries

General Assistance

• Assist in other day-to-day activities related to the QA department as assigned by your superior

Skills & Qualification:

• Min. Diploma in Engineering (Electronics / Electrical) or equivalent
• Min. 1 year of experience in electrical / electronic product testing and qualification
• Knowledge in ISO 9001: 2015 QMS standard will be added advantage
• To be able to operate lab equipment (calliper, visual scope, resistance checker, High voltage tester).
• Prior experience in SAP system is required for this role. Knowledge of cable product testing is an added advantage
• Good written and communication skills in English
• Good customer handling skills and able to communicate to all levels in the organization
• Proficient in Microsoft Words, Excel & Power point
• Addresses present issues immediately and independently
• Possess self-confident and willing to share opinions and expertise in discussions
• Anticipate potential problems and takes action to avoid crisis
• Provide support to colleague in the Department and work as a team to achieve Department goals and targets

• Location: Tuas
• Work-Life Balance
• Yearly appraisals salary adjustment（Based on performance)
• Singlife Medical Insurance Benefits

Responsibilities :

• Prepare group consolidation, financial report and financial analysis.
• Prepare and submit of consolidated monthly financial reports.
• Oversee the accounts of subsidiaries companies within the Group to ensure timely monthly closing and reporting.
• Statistics / survey preparation and submission
• Provide accounting advice to colleagues and associate companies to ensure common application of accounting guideline, policies and procedures.
• Handle subsidiaries/associate companies in forecast reporting and in their management accounts process. Liaise with external auditors in annual financial audit and statutory reporting for the Group.
• Prepare Group’s annual budget and quarterly rolling forecast.
• Assist Accounts Dept in ad-hoc tasks as may be assigned.
• Review and approve WIP
• Analyse, prepare, explain, and submit Flash report to Directors/Shareholders
• Liaising with all auditors and tax agents

Requirements :-

• Degree/Diploma in Accountancy or equivalent professional qualification
• 5 years accounting experience
• Ability to work independently with minimum supervision

*Only shortlisted candidates would be notified**

Job Description:

• The incumbent shall thrive as part of the performing sales team and will be responsible to attain the set team/individual sales budget, with revenue from product based, leasing and/or solutions-based sales.
• Possess strong sales management skills including but not limited to, tracking and attainment of sales revenue / margin based on forecast, negotiation skills to address all parties’ needs to obtain win-win status, account servicing skills with return customers / account receivable mindset.
• Build and maintain new / existing customers bases through strong market knowledge, strong partnership and engagement.
• Liaise closely with Service Operations teams to ensure reliability, availability and serviceability.
• Maintain team-based spirit with continuous market data and customer information exchange among the team to bring strong value to the Organization and Sales Dept.

Experience, Skill and Competency required:

• 1-3 years of pre-sales, technical sales or sales of construction equipment (such as Forklift, Excavator, Drilling Rig, Crawler Cranes) in construction / engineering industry. Interested applicants who do not possess construction equipment sales background but have ability to demonstrate the competency to be successful on this role, are welcome to apply.
• Candidates with Diploma in Engineering related background will have an advantage.
• Entail strong problem-solving mentality to anticipate customers’ enquiries, help them find solutions and create good value to the business partnership.
• Demonstrate persistency, consistency and adaptability to strive for success.
• Exhibit good negotiation and communication skills to manage all parties’ interests.
• Possess self-motivation and confidence to excel in various business scenarios.
• Possess own car and with valid Singapore Class 3 driving license.

As a member of the Control and Instrumentation team, you will be responsible for executing maintenance work on instrumentation and control systems in the power plant effectively, efficiently, and to comply with safety and regulatory requirements.

Responsibilities:

• Carry out repair and rectification of equipment failure and malfunction. Test and recommissioning of rectified system or equipment
• Carry out the overhaul, inspection, calibration, servicing program during plant scheduled outage.
• Implement modification, upgrading, and installation plans for plant system and equipment for enhancement, availability, and reliability improvement.
• Maintains detailed work reports, spreadsheets, graphs, plots on computer-based software (Maximo, MS Word, and MS Excel)
• Assist Engineers and Technical Officers in the maintenance work
• Supervise contractors under his charge

Requirements:

• Nitec in Electronics Engineering or equivalent
• Possesses knowledge of Instrumentation
• Preferably possesses 2 years of experience in Power Plant or Oil and Gas industry
• Self-driven, with a good working attitude and a good team player
• Is available on standby after office hours for emergency calls
• Have a safety mindset and display good workplace safety behavior.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

As a member of the Control and Instrumentation team, you will be responsible for executing maintenance work on instrumentation and control systems in the power plant effectively, efficiently, and to comply with safety and regulatory requirements.

Responsibilities:

• Carry out repair and rectification of equipment failure and malfunction. Test and recommissioning of rectified system or equipment
• Carry out the overhaul, inspection, calibration, servicing program during plant scheduled outage.
• Implement modification, upgrading, and installation plans for plant system and equipment for enhancement, availability, and reliability improvement.
• Maintains detailed work reports, spreadsheets, graphs, plots on computer-based software (Maximo, MS Word, and MS Excel)
• Assist Engineers and Technical Officers in the maintenance work
• Supervise contractors under his charge

Requirements:

• Diploma in Electronics Engineering or equivalent
• Possesses knowledge of Instrumentation
• Preferably possesses 2 years of experience in Power Plant or Oil and Gas industry
• Self-driven, with a good working attitude and a good team player
• Is available on standby after office hours for emergency calls
• Have a safety mindset and display good workplace safety behavior.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

Job Description:

• The incumbent shall thrive as part of the performing sales team and will be responsible to attain the set team/individual sales budget, with revenue from product based, leasing and/or solutions-based sales.
• Possess strong sales management skills including but not limited to, tracking and attainment of sales revenue / margin based on forecast, negotiation skills to address all parties’ needs to obtain win-win status, account servicing skills with return customers / account receivable mindset.
• Build and maintain new / existing customers bases through strong market knowledge, strong partnership and engagement.
• Liaise closely with Service Operations teams to ensure reliability, availability and serviceability.
• Maintain team-based spirit with continuous market data and customer information exchange among the team to bring strong value to the Organization and Sales Dept.

Experience, Skill and Competency required:

• 1-3 years of pre-sales, technical sales or sales of construction equipment (such as Forklift, Excavator, Drilling Rig, Crawler Cranes) in construction / engineering industry. Interested applicants who do not possess construction equipment sales background but have ability to demonstrate the competency to be successful on this role, are welcome to apply.
• Candidates with Diploma in Engineering related background will have an advantage.
• Entail strong problem-solving mentality to anticipate customers’ enquiries, help them find solutions and create good value to the business partnership.
• Demonstrate persistency, consistency and adaptability to strive for success.
• Exhibit good negotiation and communication skills to manage all parties’ interests.
• Possess self-motivation and confidence to excel in various business scenarios.
• Possess own car and with valid Singapore Class 3 driving license.

Job Description:

· Developing and managing operational activities, including the monitoring of Workplace Safety and Health (WSH) strategies, and overseeing manpower, financial and resource plans.

· Day to day repair and maintenance job arrangement and yard operation management.

· Manage cost, quality and schedule, as well as health, safety and environmental activities for the site.

· Maximise productivity within the maintenance environment through sound scheduling and planning.

· Supervision the office team and review the job card and overtime to ensure all jobs are recorded and billed accordingly.

· Review invoices, quotation and efficiency of workers in perform their repair works.

Requirements:

· Minimum 2-3 years experience in heavy machinery industry.

· Technically background of Heavy machineries.

· Strong analytical and problem-solving abilities.

· Excellent communication and interpersonal skills.

Job Description:

· Developing and managing operational activities, including the monitoring of Workplace Safety and Health (WSH) strategies, and overseeing manpower, financial and resource plans.

· Day to day repair and maintenance job arrangement and yard operation management.

· Manage cost, quality and schedule, as well as health, safety and environmental activities for the site.

· Maximise productivity within the maintenance environment through sound scheduling and planning.

· Supervision the office team and review the job card and overtime to ensure all jobs are recorded and billed accordingly.

· Review invoices, quotation and efficiency of workers in perform their repair works.

· Technically strong on the repair and servicing of china brand heavy equipment.

Requirements:

· Minimum 2-3 years experience in heavy machinery industry.

· Technically background of Heavy machineries.

· Strong analytical and problem-solving abilities.

· Excellent communication and interpersonal skills.

As a member of the Control & Instrumentation team, you will be responsible for the effective maintenance of control systems and instrumentation in the power plant to achieve high reliability and availability in accordance with statutory, regulatory, and safety requirements.

Responsibilities:

• Ensure maintenance work is executed effectively, efficiently and complied with safety and regulatory requirement.
• Respond and attend to plant failures and forced outages to ensure timely and proper rectification and restoration.
• Plan and ensure safe and timely execution of plant overhaul activities.
• Recommend and implement modification, upgrading and installation plans for plant system and equipment for enhancement, availability and reliability improvement.
• Manage the procurement of parts and services to meet the maintenance needs of the section, including spare parts and external services for routine and breakdown maintenance.
• Lead and manage a team of technical officers and technicians.
• Development of staff.

Requirements:

• Degree in Electronic & Electrical Engineering or equivalent recognised by the Professional Engineers Board.
• Possesses sound knowledge of Control and Instrumentation and good working knowledge of safety and statutory requirements.
• Driven self-starter with strong work ethics.
• Team player with strong analytical, technology and communication skills.
• Is available on standby after office hours for emergency calls.
• Knowledge in cyber security will be advantageous.
• Have a safety mindset and display good workplace safety behaviour.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

Seeking a driven and fit personnel. The candidate will be reporting to the Manager and supervising all functions of pickup and delivery in Qxpress.Candidates are preferred to have a minimum of 1 year of working experience in the relevant field. All other candidates will also be considered if shown keen interest in logistics work.

Job Responsibilities:

• Oversee and monitor last mile deliveries.
• Serve as the primary point of contact for addressing customer inquiries and concerns.
• Manage the processing of delivery returns from drivers and customers.
• Ensure that key performance indicators are achieved set by supervisor or manager.
• Ensure adherence to safety protocols and standard operating procedures.

Job Requirements:

• Minimum of 1 year(s) of working experience in relevant field, candidate who shown keen interest in logistics work will also be considered.
• Must be physically fit.
• Strong time management skills.
• Meticulous and detail oriented.
• Ability to communicate with all partners via calls and emails.
• Ability to complete multitask within given timeline.
• Class 3 license will be an advantage.
• Singaporeans Only.

Remuneration:

• Basic Salary - $2100 (Probation) to $2300 (Confirmation)
• Performance Incentive: $300 monthly for good attendance & performance! (No lateness or absence)
• Tenure allowance - after 1st/2nd/3rd year anniversary of employment the employee is eligible for $150-$500/monthly tenure allowances
• Mobile Phone Allowance
• Meal Allowance for overtime more than 2 hours on top of normal working hours - $10
• Overtime pay eligible

Other information:

• 12 days annual leave
• 14 days sick leave/60 days hospitalization

Working Hours: 5.5 days/week

• Monday to Friday : 9am to 6pm
• Saturday : 9am to 1pm

Please submit your updated resume through the Apply Now link.

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage