Job Scope :

- Inspect outgoing parts and incoming sub-contracted parts according to established procedure / specification of inspection and carry out Incoming Process Inspection.

- Maintain quality record and file quality data.

- Highlight quality problems discovered to the QA Manager and Factory Manager / Production Manager / Asst. Production Manager for action.

- Ensure that all non-conforming products are not mixed with good products prior to disposition.

- Authorise the rejection of parts if found unsatisfactory.

- Authorise the release of conforming parts to be sent to the store for subsequent delivery to customers.

- Perform factory routine test and check of switchboards completed in the workshop.

- Testing and commissioning of switchboards on board vessels or on-site to the satisfaction of customers; and attend to warranty claims / quality complaints.

- Conduct official tests on the switchboards which require witnessing by surveyors or consultants and also maybe with the presence of customers.

- Assist the Manager in quality responsibilities and achieving quality objectives.

- Maintain good housekeeping in the QA Department.

- Observe and adhere to safety rules during the performance of every task.

- Ensure the use of calibrated instrument for inspection.

- Initiate action to prevent the occurrence of Product Non-Conformity.

- Initiate, recommend or provide solutions to problem detected.

- Verify the implementation of solutions.

- Control further processing and delivery of Non-Conforming products until the deficiency has been corrected.

- Carry out other responsibilities as and when assigned by the superiors.

Requirements:

- Nitec / Diploma in Electrical Engineering or equivalent

- 1 - 2 years of relevant working experience

- Experience with Switchboard / Panels an added advantage

- Able to travel for work occassionally

- Good communication and interpersonal skills

- Comfortable working at Tuas. Transport provided

- Able to start work immediate or short notice

• Handle mailbox survey submissions, feedback, and requests from survey respondents within stipulated turnaround time.
• Ensure consistent and detail cases notes updated in system after each liaison with respondents.
• Responsible for inter-department liaison for correct assignment of respondents to the parties responsible.
• Ensure prompt follow-up for survey cases under pending status.
• Provides accurate daily report on mailboxes activities for the day to relevant stakeholders.
• Ensuring all potential/actual complains are acted upon within stipulate timeline.

Requirements:

• Singaporean
• At least Diploma or above
• At least 2 years of relevant customer service, call audit and emailing experience

Interested candidates, please click on the following link to begin your job search journey and submit your curriculum vitae (CV) directly through the official PERSOLKELLY job application platform - GO. https://go.persolkelly.com/job/apply/5789

By sending us your personal data and CV, you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for account creation in GO and the purposes set out in the Privacy Policy https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with GO’s Terms of Use https://go.persolkelly.com/Tacand the Privacy Policy. If you wish to withdraw your consent, please email us at [email protected]. Please feel free to contact us if you have any queries. Suzana Binte Slemat (EAP No. R1989461) EA Licence No. 01C4394

Department Head , Quality Assurance

Job Descriptions

· To lead and manage a team on quality assurance in a fast pace semi-conductor industries.

· To take ownership for technical transfer from Head Office (Japan), new products testing; as well as assisting customers during material evaluation and qualification phases, and provide solutions on technical and quality matters on the products.

· To work closely with Head Office (Japan), including Global Quality Assurance, R&D team, Manufacturing team, Engineering Team, Sales/Marketing and Supplier Chain team in achieving towards customer satisfaction.

1. To work closely, especially with Japanese group customers (necessary to communicate in local Language), in the establishment of suitable material configurations and specification, to meet their expectations and requirements and providing technical support as necessary.
2. To conduct experimental research on properties on products, as well as in-depth failure analysis and testing to facilitate root cause investigation for total improvement

Job Requirement:

- Degree / master in Polymer / Material engineering / Applied Chemistry / Engineering

- Minimum 15 years of relevant work experience in semiconductor industries (with at least 5 years in managerial position), and must be familiar with characteristic of epoxy molding compound for IC encapsulation, epoxy glue for die attachment, lid attachment, sealing.

- Requires detailed knowledge about ;

1) Reliability requirement for power device, automotive semiconductor.

2) Composite material between organic and inorganic.

3) Organic synthesis and adhesion between polymers and metals.

4) Polymer production process especially for Epoxy and Phenolic resin.

5) Metal property especially for silver

6) Rheology for paste material

7) Below equipments:

o DCS (Different Scanning Calorimetry)

o DMA (Dynamic Mechanical Analysis)

o TMA (Thermo-Mechanical Analysis)

o TGA (Thermogravimetric Analysis)

o Viscometer

o Rheometer

o GPC (Gel Permation Chromatography)

o SEM (Scanning Electron Microscope)

o Printing Machine

o Dispensing Machine

o Die Bonding Machine

o Wire Bonding Machine

- Familiar with Japanese Patent system

- Familiar with materials and custom regulations in respective countries, such as Japan (Japan (CSCL) , USA (TSCA), EU (EINECS,REACH), Korea (ECL) , Philippines (PICCSS), China (IECSC), Taiwan(ECN).

- Industrial experiences in failure analysis (FA or polymer science and semiconductor material composition) is necessary).

Note: This role requires frequent travel and will be based in China and Vietnam for at least 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Key Responsibilities:

• Implement advanced monitoring systems to ensure product quality and optimize yield in electronics manufacturing.
• Proactively identify areas for improvement and develop strategies to enhance overall product quality.
• Lead initiatives to address and resolve abnormal quality issues within the manufacturing process.
• Collaborate with cross-functional teams to implement effective solutions and preventive measures.
• Drive efforts to improve internal quality control procedures and enhance process capability.
• Implement best practices to streamline processes and maximize operational efficiency.
• Lead initiatives to resolve customer-reported quality issues, ensuring timely and effective resolutions.
• Prepare detailed reports for stakeholders outlining corrective actions and preventive measures.
• Develop and implement strategies to optimize quality inspection processes.
• Identify opportunities for automation and technological advancements to enhance inspection efficiency.
• Foster open communication and collaboration across departments for effective quality management.
• Coordinate with various teams to ensure a unified approach toward achieving quality objectives.
• Manage personnel-related tasks, including task assignments, coordination, attendance, and performance management.
• Develop and implement training programs to enhance team skills and knowledge.
• Oversee the timely delivery of tasks and projects to meet quality objectives within established timelines.

Requirements:

• Bachelor’s degree in a relevant field; advanced degree preferred.
• A minimum of 6-8 years of proven experience in quality management, particularly within manufacturing processes.
• Strong analytical and problem-solving skills.
• Excellent leadership and interpersonal skills.
• Familiarity with quality management systems and standards such as TS16949 and VDA 6.3.
• Experience collaborating with counterparts in China/Taiwan.
• Certification in quality management (e.g., Six Sigma) is advantageous.
• Willingness to travel frequently and be based in China and Vietnam for at least 10 months per year (separate living accommodations provided). The role includes annual 4 round-trip tickets back to Singapore.

Objectives of the position:

This role is for the Customer Quality Support for Company’s product distribution where Customer’s feedback & Product Quality requirements / issues are handled. The person will be responsible to handle Customers requirements such as complaints, test data & other technical information as requested. Customer complaints handling will also include the necessary communication with all the stake holders (Customer, Supplier, CS, PP, SVM, LOG). Knowledge in cable testing and specification requirements will be required to understand Customer complaints (technical & logistics).

Key Responsibilities:

1. Manage Customer complaint processes such as acknowledgement of the complaint, updating into SAP, keeping track of the complaint, closure of the complaint & summarizing for monthly reporting. Proper handling of customers’ needs by providing accurate and timely information on enquiries related to cable standards, test reports and handling of customer complaints.

2. Track supplier quality by means of in-coming inspection when required or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined. To generate supplier CAR and track for corrective action by liaising with the supplier.

3. Familiar with and comply to international cable testing standards and procedures. Contribute to achieving company & department KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

4. Liaising with relevant departments to effectively close the Customer complaints

5. Maintain records in SAP

6. Operate Laboratory test equipment when required

7. Assist Customer’s Technical enquiries e.g Product Test Report, RoHS, REACH, CE

8. Supplier claim processes and 8D report.

9. Prepare and issue Customer Test Certificates & COC

10. Assist in other day to day activities related to QA department as assigned by Superior.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification. Training will be provided.

▪ Knowledge in ISO 9001 : 2015 QMS standard.

▪ Must be able to operate lab equipment (calliper, visual scope, resistance checker, High voltage tester).

▪ Prior experience in SAP system is required for this role. Knowledge of cable product testing is an added advantage.

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

• Participates and conducts daily status meetings with project managers and technical support teams
• Prepares and distributes daily or weekly status reports on test progress to the project team and/or stakeholders.
• Oversee and assign tasks to team members
• Conducts Knowledge Transfer sessions and trainings for on-boarding members
• Define different scenarios for functional and integration testing
• Create and document test scripts based on functional specification requirements
• Review test cases for functional and integration testing based on the identified scenarios
• Perform data setup, run test scripts, and record test results
• Record, manage, and monitor defects in JIRA
• Provide UAT support, including system log extraction, environment readiness verification, JIRA retesting and routing, and database data extraction as needed
• Validate production issue fixes in SIT and assist with UAT verification until JIRA closure and sign-off, including support for hot fixes.
• Manually executed designed test scripts and capture test results

Job Description:

• Responsible for product quality assurance.
• Completes all administrative activities associated with quality inspection.
• Performs process audits and assists manufacturing with the interpretation of the quality and workmanship standards.
• Downloads quality information from quality system to be used for Quality reports.
• Plans and directs activities concerned with the establishment and/or continuance of process related requirements and other quality programs.
• Prepares quality documentation or equivalent.
• Prepares Statistical Process Control Charts where required.
• Responsible for authorizing the released of final products to customer.
• Supervises inspectors or technicians on the inspection plan.
• Directs inspectors or technicians engaged in measuring, inspecting and/or testing products or parts and tabulating data.
• concerning materials, product or process quality and reliability.
• Contributes to the workplace safety and health improvement for the employees, as well as environmental protection, by adhering
• to the company’s Environmental, Health and Safety policies and procedures, and helping to achieve EHS objectives and targets
• through participation of EHS programs.
• Participate and adhere to Corporate Social and Environmental Responsibility (CSER) policy, programs and procedures.

Job Requirements :

• Diploma / ITC / NTC in Mechatronics/ Electrical & Electronics engineering or related discipline, preferably with 2 years in manufacturing environment.
• Proficiency in written and communication skills in English.
• Practical computer skills and knowledge with hands-on ability.
• Familiarity with inspection equipment, statistical tools, Geometric Dimension and Tolerance knowledge will be an advantage
• Able to use microscope for inspection and verification.

Responsibilities:

• Oversee and maintain all QA/QC documentation, including certificates, test results, inspection requests, and reports on non-compliance.
• Establish inspection standards, manage testing processes, and ensure adherence to high-quality standards throughout project workflows.
• Evaluate materials for compliance with project specifications and work closely with teams to uphold material quality and procurement protocols.
• Manage test and inspection schedules, enforce compliance with procedures, and conduct quality audits across project teams.
• Monitor product quality performance, perform audits, compile monthly reports, and recommend corrective measures to sustain quality benchmarks.
• Assist the project team on QA/QC-related matters.
• Lead the establishment of a new QA/QC department to enhance quality assurance and control capabilities.

Requirements:

• Diploma in Mechanical & Electrical (M&E) Engineering or a related field.
• Minimum of 3 years’ experience in the construction industry.
• Detail-oriented individual with strong analytical and observational skills.
• Proficient in computer applications and possesses solid office administration skills.
• Able to commit to a 5.5day workweek.

Mon to Fri 8.30am - 5.30pm

Objectives of the position:

This role is for the validation of Customer technical requirements by means of inspection of In-coming goods and release lots in SAP with defined usage decisions. Testing of ISIR samples (type test) for product approval process (power, control & data cable) with compliance to company standards and verify compliance to the international cable standards e.g. EN / IEC requirements. Understanding of each testing standards and be able to communicate the requirements to respective parties including suppliers. Establish test specification to be followed by suppliers. To be able to operate all laboratory equipment in the process of cable type testing. Keep track of product approvals and Company's approved suppliers’ performance monitoring to ensure continuous product compliance to the intended specification. Corrective and preventive action process with supplier with CAR logging and follow-up for effective closure of complaints and issues related to product quality.

Knowledge in product testing and certification will be an added advantage.

Key Responsibilities:

1. Validate product quality conformance by conducting In-coming inspection and type testing for cable & accessories, include updating into SAP.

2. To be able to operate Laboratory test equipment for cable testing and accessories inspection

3. Understand international cable testing standards and inspection requirements with compliance to internal ISO procedures. Prepare test specification with detailed inspection requirement to be followed by the supplier.

4. Prepare and issue Customer test reports, certificates & COC

5. Track supplier quality by means of in-coming inspection or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined.

6. To generate supplier CAR and track for corrective action and effective closure of CARs by liaising with the supplier.

7. Liaising with relevant departments including suppliers to effectively close the CAR issued for Customer complaints or CAR’s which arise from internal findings (Z2 & Z8).

8. Maintain inspection records in SAP, determine skip lot and setup inspection requirements in SAP.

9. Assist Customer’s Technical enquiries e.g. Customer letter, RoHS, REACH & CE

10. Understand and comply with relevant ISO procedures, work instructions and corporate directives

11. Assist in other day to day activities related to QA department as assigned by superior.

12. Contribute to achieving company, department and personal KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification.

▪ Knowledge in ISO 9001:2015 QMS standard will be added advantage.

▪ To be able to operate lab equipment e.g. calliper, visual scope, resistance checker, High voltage tester etc.

▪ Prior experience in SAP system and knowledge of cable product testing is an added advantage

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

Job Description:

• Assist Product Owner, Business Analyst to craft out user story acceptance criteria
• Analyse and decompose complicated software systems, and design a holistic test strategy
• Research emerging technologies and develop test automation framework
• Develop test suites of test scenarios and test cases.
• Perform time-boxed exploratory testing
• Maintain regression test suite in QA nightly build
• Actively refine the smoke test suite in the Development CI environment
• Lead system integration testing with other systems
• Manage user acceptance testing
• Manage defect life cycle, test artifacts, and repository
• Drive continuous improvement in agile testing practices and tools.
• Improve software quality using XP practices such as code review and unit testing
• Understand the IT management policy, quality management policy and security guidelines to ensure the development processes, procedures and system are designed to comply with these policies and guidelines

Job Requirements:

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines
• Min 3 years experience in exploratory testing and regression test automation
• Strong analytical skills
• Meticulous attention to details
• Good interpersonal skills
• Experience in agile development environment
• Experience with Robot Framework, SikuliX, Selenium, playwright, Micro Focus Testing Tools (Mobile Center, UFT, QC and Sprinter)
• Certified Software Testing Professional and/or Certified Software Quality Analyst will be an added advantage

Job Description:

• Assist Product Owner, Business Analyst to craft out user story acceptance criteria
• Analyse and decompose complicated software systems, and design a holistic test strategy
• Research emerging technologies and develop test automation framework
• Develop test suites of test scenarios and test cases.
• Perform time-boxed exploratory testing
• Maintain regression test suite in QA nightly build
• Actively refine the smoke test suite in the Development CI environment
• Lead system integration testing with other systems
• Manage user acceptance testing
• Manage defect life cycle, test artifacts, and repository
• Drive continuous improvement in agile testing practices and tools.
• Improve software quality using XP practices such as code review and unit testing
• Understand the IT management policy, quality management policy and security guidelines to ensure the development processes, procedures and system are designed to comply with these policies and guidelines

Job Requirements:

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines
• Min 3 years experience in exploratory testing and regression test automation
• Strong analytical skills
• Meticulous attention to details
• Good interpersonal skills
• Experience in agile development environment
• Experience with Robot Framework, SikuliX, Selenium, playwright, Micro Focus Testing Tools (Mobile Center, UFT, QC and Sprinter)
• Certified Software Testing Professional and/or Certified Software Quality Analyst will be an added advantage

Perform materials checking, finished products, production line. Ensure quality performance through examination of proper inspection, testing and measuring equipment, process capability studies and mistake proofing. Analysis and disposition of customer returns. new products, maintaining existing listings, instructions and product labeling.

Job Scope :

- Inspect outgoing parts and incoming sub-contracted parts according to established procedure / specification of inspection and carry out Incoming Process Inspection.

- Maintain quality record and file quality data.

- Highlight quality problems discovered to the QA Manager and Factory Manager / Production Manager / Asst. Production Manager for action.

- Ensure that all non-conforming products are not mixed with good products prior to disposition.

- Authorise the rejection of parts if found unsatisfactory.

- Authorise the release of conforming parts to be sent to the store for subsequent delivery to customers.

- Perform factory routine test and check of switchboards completed in the workshop.

- Testing and commissioning of switchboards on board vessels or on-site to the satisfaction of customers; and attend to warranty claims / quality complaints.

- Conduct official tests on the switchboards which require witnessing by surveyors or consultants and also maybe with the presence of customers.

- Assist the Manager in quality responsibilities and achieving quality objectives.

- Maintain good housekeeping in the QA Department.

- Observe and adhere to safety rules during the performance of every task.

- Ensure the use of calibrated instrument for inspection.

- Initiate action to prevent the occurrence of Product Non-Conformity.

- Initiate, recommend or provide solutions to problem detected.

- Verify the implementation of solutions.

- Control further processing and delivery of Non-Conforming products until the deficiency has been corrected.

- Carry out other responsibilities as and when assigned by the superiors.

Requirements:

- Nitec / Diploma in Electrical Engineering or equivalent

- 1 - 2 years of relevant working experience

- Experience with Switchboard / Panels an added advantage

- Able to travel for work occassionally

- Good communication and interpersonal skills

- Comfortable working at Tuas. Transport provided

- Able to start work immediate or short notice

Job Description:

• Assist Product Owner, Business Analyst to craft out user story acceptance criteria
• Analyse and decompose complicated software systems, and design a holistic test strategy
• Research emerging technologies and develop test automation framework
• Develop test suites of test scenarios and test cases.
• Perform time-boxed exploratory testing
• Maintain regression test suite in QA nightly build
• Actively refine the smoke test suite in the Development CI environment
• Lead system integration testing with other systems
• Manage user acceptance testing
• Manage defect life cycle, test artifacts, and repository
• Drive continuous improvement in agile testing practices and tools.
• Improve software quality using XP practices such as code review and unit testing
• Understand the IT management policy, quality management policy and security guidelines to ensure the development processes, procedures and system are designed to comply with these policies and guidelines

Job Requirements:

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines
• Min 3 years experience in exploratory testing and regression test automation
• Strong analytical skills
• Meticulous attention to details
• Good interpersonal skills
• Experience in agile development environment
• Experience with Robot Framework, SikuliX, Selenium, playwright, Micro Focus Testing Tools (Mobile Center, UFT, QC and Sprinter)
• Certified Software Testing Professional and/or Certified Software Quality Analyst will be an added advantage

i. Monitor/manage feedback from multiple feedback channels (e.g.calls to contact centre, emails to public facing inboxes, as well as other digital and traditional platforms);

ii. Monitor and manage Authority’s contact centre;

iii. Manage and enhance Authority’s Customer Management System (CMS) by working closely with system vendor on the deployment of system enhancements by stipulated timeline;

iv. For cases handled by SQO, ensure that final replies are issued to feedback providers within the service timelines (See ANNEX C);

v. Respond to requests from operation divisions for vetting of replies within one working day;

vi. Submit monthly data analytics report on NParks and AVS overall case management performance for current month by the end of the next month;

vii. Implement any other Service improvement initiatives when assigned

Monday to Friday - 8.30 AM to 6.00 PM

Working location : 1 Cluny Road , Singapore 259569

Job Requirement :

Degree in mass communications, marketing, or related discipline;

(b) At least 3 years’ relevant experience in customer service management, call centre management or quality service management;

Authorities and Responsibilities

1. Ensure all fabrication work is done with acceptable quality by daily monitoring include inspecting according to specification, procedure and applicable standards.
2. Understand all technical specification and standard compliance and ability to handle troubleshooting project correction.
3. Prepare welding methods, PQR assembly and other CWI duties.
4. Co-ordinate, communicate with member even carrying out inspection of all the welding and associated actions in accordance with the approved Welding Procedure Specification, drawings and Company Specification and requirements.
5. Co-ordinate and liaise with Production personnel to ensure that all inspection stages comply to inspection and test plans on material or structure.
6. Witness and verify all tests include reinstatement etc. and prepare reports after such tests are conducted.
7. Verify product identification through material verification inspection and periodical random checks on site.
8. Responsible in executing directives as set forth for the Quality Assurance Department in meeting management objectives in term of quality control/assurance of all production fabrication works/projects.
9. Implement and maintain a system of auditing the facility and periodic calibration of test, measuring equipment and tools include all documentation, procedure qualification records accordance to customer specification and code.
10. Manage and supervise a team of inspectors / technicians in meeting departmental quality goals and production schedule.
11. Manage customer complaints, corrective and preventive action programs and Administer and manage continuous improvement program for all QA processes.
12. Work closely with customers, production and suppliers to meet the quality requirements.
13. Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
14. Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
15. Manage the implementation / schedule of calibration control.
16. Participate in the implementation of risk assessment and risk control of medical devices.
17. Any other tasks and responsibilities assigned from time to time.

Competence Requirement

• Min. ITE-NTEC/Diploma/Degree level PE/ME or its related discipline.
• Fresh Degree or min 3 years in Quality Assurance in production/fabrication/welding environment or it relevant experience in QC/QA environment.
• Perform CMM programming, smart-scope and QC measuring tools/equipment.
• Certified with welding certification by American Welding Society, Certification Welding Inspector, AWS-CWI. - Optional
• Minimum 3 years of related experiences in welding capacity in structural fabrication.
• Able to interpret technical drawings and reading symbols.
• Understand the quality principles, standards, internal business systems and processes.
• Good interpersonal skills, ability to communicate and Works well with all levels of staff and technically competent.
• Good knowledge of International Codes and Standards (ASME, AWS, ASTM, API).
• Basic Knowledge and usage of Microsoft Office
• Sound Technical knowledge on steel structural and steel fabrication procedures and welding inspection.
• Basic knowledge of ISO 9001 and OHSAS 18001 Management system

Authorities and Responsibilities

1. Responsible for providing directives for the Quality Assurance Department in meeting management objectives.
2. Formulate, implement and evaluate quality strategies programs for the company.
3. Implement and maintain a system of auditing the facility and periodic calibration of test, measuring equipment and tools.
4. Manage customer complaints, corrective and preventive action programs.
5. Administer and manage continuous improvement program for all QA processes.
6. Work closely with auditors, customers, production and suppliers to meet the quality requirements.
7. Manage sub-contractors for on-time supply of treatment process, as well as meeting technical requirement.
8. Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
9. Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
10. Review and approve disposition program / action for nonconforming products.
11. Ensure that processes needed for the quality management system are established and implemented.
12. Report to top management on the performance of the quality management system, and note needed improvements.
13. Ensure the promotion of awareness of statutory, regulatory and customer requirements throughout the organization.
14. Ensure and coordinate the implementation of risk assessment and risk control of medical devices

The Quality Assurance Manager plays a crucial role in business by ensuring that products meet certain standards of quality. He/She plans, directs or coordinates quality assurance programs and formulate quality control policies. He/She also works to improve an organisation's efficiency and profitability by reducing waste. He/She prepares and update quality documentation, basing their processes on a recognised standard such as ISO 9000 – Quality Management, published by the International Organisation for Standardisation. He/She supervises teams of inspectors who carry out the detailed assessment of products and their components at different stages of production. He/She recruits and trains supervisors, and provides them with documented quality standards as guidelines for their daily work. He/She also selects quality inspection tools and software to support the inspection team.

Competence Requirements:

• Diploma in Mechanical Engineering / Quality Engineering or equivalent.
• Minimum 6 years of solid experience in Quality Management in similar or related industry and 3 years in management level.
• Good knowledge in implementing and up keeping Quality Management System.
• Strong leadership and good interpersonal skills.
• A team player with strong sense of responsibility to ensure plant effective quality performance.

~ Assist in the implementation of company quality systems.
~ Conduct Quality Assurance audit.
~ Manage cause investigation for non-conformance.
~ Manage company quality systems.
~ Manage departmental activities and deployment.
~ Able to commute between Tuas Plant and Loyang Plant.

* This is a 1 year contract role (subject to extension/conversion) *

Key responsibilities:

• Responsible for inspection of parts and products and ensuring that they comply with the set standards and specifications
• Ensure that all inspection check sheets are duly completed
• Ensure that non-conformance parts and products are not released to the customers
• Ensure that defects are corrected before releasing them to Production
• Ensure that corrective or preventive action are in place and sustained
• Carry out duties in according with Quality Policy, EHS control procedures and WIS
• Ensure that all machine tools and instruments are properly calibrated and taken care of

Job Requirements:

• Minimum NTC2/3, ITC in Mechanical/Mechatronics/Precision Engineering
• At least 1 year of experience in quality control and related work
• At least 1 year of experience in the operation of CNC machines
• Basic knowledge of Microsoft Office tools: Excel, Word, PowerPoint

• In-charge of submission and review of documentation

• To prepare cost estimation, budget & control & to check sub- contractor’s progress claim

• To plan manpower, tools and materials for the work

• Ensuring project meet deadlines

• Coordination of structural works during construction process

• Liaise with Clients, Consultants, main contractor, Subcontractors & authorities to ensure work progression is on schedule

• To assist Project Manager on coordination work, planning and monitoring site's workforce and multi-disciplinary works from inception to completion, inclusive of project documentation, plans and reports etc.

• To ensure the project team complies with safety regulation

· Reviewed shop drawings, submitted from sub-contractor and made submission to consultants

• Evaluate the master programme and monitor work progress
• Prepare cost estimates and monitor progress claim, interim certificate and issue payment response
• Identify potential or actual causes of delay and take preventive or remedial actions
• Monitor submissions and clearances from relevant authorities
• Coordinate a Project Team of consultants, contractors, developer in daily-site activities
• Conduct project briefing and kick start meeting
• Check safety management system and conduct periodic safety inspection
• Conduct feasibility studies and recommendations on the development concept, preliminary programme and budge
• Responsible for periodic progress reports
• Assist on documentations and make recommendation to clients for award of contracts

Responsibilities:

As the Food Safety and Quality Assurance Officer, you will be responsible for ensuring the highest standards of food safety, quality, and compliance with ISO22000 for our central kitchen, supermarket counters and trading business under the subsidiary company.

Your key responsibilities include:

1. Compliance Management:

• Oversee and implement food safety and quality management systems in accordance with ISO22000.
• Conduct regular internal audits and inspections to ensure compliance with all relevant regulations and internal standards.

2. Documentation and Reporting:

• Maintain accurate records of all food safety and quality assurance activities.
• Prepare comprehensive reports for management, summarizing key performance indicators and areas for improvement.

3. Training and Development:

• Develop and deliver training programs for operation staff at the central kitchen and supermarket counters on food safety protocols and best practices.
• Keep the team informed about updates in food safety regulations and industry trends.

4. Incident Response:

• Establish and implement effective procedures for handling food safety incidents and product recalls protocols.
• Conduct thorough investigations into any breaches of food safety standards and recommend corrective actions.

5. Supplier and Vendor Management:

• Collaborate with suppliers and vendors to ensure the quality and safety of raw materials used in our production processes.
• Evaluate and approve suppliers based on established criteria.

Qualifications:

• Certification in ISO22000.
• Proven experience in food safety and quality assurance, preferably in the sushi and sashimi production industry.
• Strong knowledge of local and international food safety regulations.
• Excellent communication and training skills.

Job Description & Requirements

• Monitor and manage day-to-day operations of projects, or function, including developing and monitoring budgets, coordinating activities with other sub-contractors
• Plan the work schedule and efficiently organize the site facilities in order to meet an agreed program of deadlines
• Liaise with consultants and/or sub-contractors engaged on the project
• Attend regular meetings with owner/client/contractors/sub-contractors and ensure the progress is on schedule
• Resolve any unexpected technical difficulties and other problems that may arise
• Monitor and ensure subcontractors comply with specified requirements
• ldentify and comply with all applicable statutory regulatory requirements related to project
• Identify possible risks to project and stakeholders as well as create contingency plans to mitigate these risks
• Respond swiftly to work delays, emergencies and other problems
• Clear communication to external parties including client, subcontractors, consultants, vendors etc. on project needs, requirements and schedule by means of daily construction oversight
• Review all method statement of the activities ensuring safe execution and maximization of resources used for job efficient
• Prepare monthly site report updating the latest progress and planning to achieve the project milestone
• Complete task as assigned by Project Manager and Project Director

Requirement:

• Candidate must possess at least Bachelor's Degree in Civil Engineering
• At least 10 years of engineering experience in the related field is required for this position
• At least 5 years of experience in managing civil and infrastructure construction work for projects of similar scale, complexity and nature of work
• Work as Team leader, leading team on project requirements and target achievement
• Acting as rigorous preson on Identify possible risks in project

Job Summary:

The Contracts Manager is responsible for overseeing the review, negotiation, drafting, implementation and maintaining the contracts within the organization. The Contract Manager will assist to build and sustain excellent client relationships and propose partnership engagement models (primarily legal considerations) for strategic partnerships and collaborations. The Contracts Manager is expected to ensure that contracts are properly executed in compliance with company policies, industry standards, legal requirements, and mitigate risks to our company. The Contracts Manager will work closely with project teams, clients, subcontractors, and suppliers to ensure the successful delivery of marine construction projects on time and within budget. The Contracts Manager also plays a key role in protecting the organization's interests, promoting successful business engagements and conduct periodic contract performance review.

This is office based (Bukit Batok), however may need to visit site if required.

Job Responsibilities:

• Assist Senior Management in formulation of business strategies. Assist to build and sustain excellent client relationships and propose partnership engagement models (primarily legal considerations) for strategic partnerships and collaborations.
• Implements and manages the Contracts Department in all Pre and Post Contracts administration and Pre and Post Tender covering Procurement works.
• Oversees and work with the team on cost planning and preparation of tender submission.
• Oversees the team on invitation for quotations, negotiations, evaluation, recommendation, and confirmation.
• Engage various stakeholders to draft, review, negotiate, and implement contracts for marine construction projects, ensuring accuracy, completeness, and compliance with legal regulations, all terms and conditions are favourable and in alignment with company objectives. This includes analysing contractual obligations, terms of payment, deliverables, and any associated risks.
• Identify potential risks related to contracts and projects, implementing strategies to mitigate these risks.
• Check monthly progress claims.
• Evaluate subcontractor payment claims.
• Attend Client and Project Site Meetings. Meet with Clients and Consultants to discuss project, cost matters and variation orders.
• Collaborate with project managers, engineers, and other stakeholders to ensure contract terms are followed and project milestones are met.
• Monitor project budgets and expenditures, ensuring compliance with contract terms and identifying opportunities for cost savings.
• Provide legal advice and support to functional units including drafting of contracts, negotiation, and contracts documents administration.
• Liaise with internal and external lawyers for dispute resolution.
• Drafting contractual letters to the Clients, Consultants, Subcontractors on Extension of time claims, etc.
• Maintain detailed records of all contract-related activities and provide regular reports to senior management on contract status, risks, and issues.
• Conduct periodic evaluations to assess contract performance, identify areas for improvement, and drive value optimisation.

Job Requirements:

• Bachelor’s degree in Construction Management, Engineering, Business Administration, or a related field.
• At least 8 -10 years of experience in contract management in construction industry, including experience with large-scale projects.
• Legal knowledge and experience with contracts are highly preferred.
• Maintain a high level of professionalism, integrity, and ethical conduct to handle confidential and sensitive information, and adherence to ethical standards for establishing trust and credibility.
• Strong in contract review and negotiation, communication, and organizational skills; proficiency in contract management software and tools.
• Strong analytical and problem-solving abilities to analyse complex contract terms, identify potential risks, and develop solutions to mitigate them.
• Meticulous attention to detail to accurately review, draft, and administer contracts.
• A keen eye for identifying inconsistencies, errors, or potential issues is vital to maintain contract integrity.
• Capable of prioritizing tasks, meeting deadlines, and managing contract-related workflows efficiently.
• In-depth understanding of marine construction processes, industry standards, and regulatory requirements (contract law and legal principles).

Job Title: Construction Project Manager

Location: Singapore
Employment Type: Full-time

Job Description

We are seeking an experienced and detail-oriented Construction Project Manager to lead and manage construction projects from initiation to completion. The role involves ensuring projects meet budget, timeline, and quality standards while adhering to safety and regulatory requirements. This is a demanding position requiring leadership, technical expertise, and the ability to manage multiple stakeholders effectively.

Work Environment:

• Requires site visits to outdoor construction areas under varying environmental conditions.
• May involve working extended hours or weekends based on project needs.

Roles & Responsibilities

Project Management

• Plan, execute, and oversee construction projects, ensuring timely delivery within approved budgets.
• Develop comprehensive project schedules, risk assessments, and resource plans.
• Monitor and enforce compliance with workplace safety, health regulations, and quality standards.
• Manage procurement processes, including bid evaluations, contract negotiations, and vendor selection.

Technical Oversight

• Review and ensure all designs and construction works comply with specifications and industry standards.
• Coordinate with engineers, architects, and other stakeholders to meet project requirements.
• Use AutoCAD and SketchUp proficiently to analyze and optimize design solutions.

Site Supervision

• Oversee daily site activities, supervise subcontractors, and manage site labor force.
• Liaise with surveyors and Qualified Persons (QP) representatives for inspections and quality control.
• Resolve on-site technical issues promptly and effectively.

Stakeholder Communication

• Serve as the primary point of contact for clients, providing regular updates on project status and addressing concerns.
• Conduct project team meetings to identify and resolve challenges during construction.
• Maintain strong relationships with clients, consultants, subcontractors, and suppliers.

Documentation and Reporting

• Prepare and manage contracts, change orders, progress reports, and safety records.
• Provide detailed reports to senior management and ensure timely submission of invoices and payment tracking.

Skills & Requirements

Minimum Qualifications

• Bachelor’s Degree in Civil Engineering, Architecture, Construction Management, or Project Management, recognized by BCA.

Experience

• At least 4 years of project management experience, preferably in plumbing, sanitary, or construction industries.

Technical Skills

• Proficient in MS Project, AutoCAD, SketchUp, and MS Office.
• Familiarity with construction management software, project scheduling tools, and cost estimation tools.

Core Competencies

• Strong project management knowledge across all stages of construction.
• Excellent decision-making and problem-solving abilities.
• Ability to manage multiple projects simultaneously under tight schedules.
• Strong leadership and interpersonal skills to lead teams and engage stakeholders.

Personal Attributes

• Meticulous, responsible, and self-motivated with the ability to work under pressure.
• Positive personality and strong team player with a proactive attitude.
• Excellent communication skills, both written and verbal.
• Ability to work in outdoor construction sites and varying environmental conditions.

Role and Responsiblities

• Ability in leading of Project Team to achieve excellence in the project.
• Plan and manage project schedule to ensure project completion according to schedule
• Manage subcontractors’ activities to ensure compliance with contract requirements.
• Monitor compliance of work with workplace safety and health regulations.
• Monitor the quality of project delivery to make sure they meet project requirements and regulations.
• To implement control measures on material / plant & equipment / utilities usage.
• Supervise daily site activities.

Job Requirements

• Degree in Civil / Structural / Building Engineering
• Completed 2 Projects as Project Manager in Residental Condo, Residential Development
• Min 3-5 years relevant experience.
• Computer skill- Using Microsoft Project, Excel, Word & Power Point etc.
• Certificate of Project Manager
• Microsoft Project