Job Scope:

• Responsible for full spectrum of the Company’s quality standard
• Issue, maintain and file all QA reports (e.g. 8D report)
• Ensure maintenance of proper records pertaining to quality related issues
• Send QA reports to vendors
• Ensure timely closure and response of all QA issues
• Ensure effective corrective action taken for all NCR/CAR issued
• Follow up with vendors on their corrective action for rejected parts
• On-site audit at vendor’s location whenever required
• Conduct FA inspections
• Issue, maintain and file FA reports
• Maintain and upkeep Quality Management System and Quality System Procedure in accordance to ISO9001

Trait, Skills and Qualifications:

• Diploma / Degree in Electronics Engineering
• Possess knowledge of ISO9001
• Knowledge on ERP system would be an added advantage
• Resourceful and able to work independently
• Good at problem solving, negotiating and communicating
• · Team player

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 2 years of experience in Quality Management System and NADCAP

Reponsibilities:

Documentation:

Responsible for preparing Final QA documents and Submission in Customers portal.

Responsible for preparing the job routers.

Handling TPI and NDE activities:

Generation of issue notes for supplier activities.

Handle and support third party inspectors

Handle and support NDE activities

Responsible for collection and verification of supplier’ NDE process reports

Calibration and Maintenance of instruments:

Maintain master list for all the instruments under Quality department and production.

Regular calibration and maintenance procedures should be established to ensure continued accuracy and performance., periodically monitoring the calibration requirements

Communication:

Effective communication is vital in this role. QA communicate quality-related issues to relevant departments, including production and to Quality Control.

Reporting:

Reports to assistant Manager – Quality and assisting on ad hoc responsibilities

Safety:

Ensuring the safety of the quality control team and compliance with safety protocols is another important aspect of the job.

Requirements:

• Minimum Diploma in Material Engineering or relevant engineering discipline.
• At least 3 years of working experience related to the manufacturing environment, preferably from the oil & gas industry.
• Able to interpret drawings and technical documents
• Able to work independently and contribute to the team excellence
• Good technical competence & strong communication skills
• Good organizing and coordination skills
• NDE level 2 inspector is an advantage

Job description

A reliable Engineer of Quality Assurance to ensure that all external and internal requirements are met before our product reaches our customers. She will be responsible for inspecting procedures, outputs and identifying mistakes or non-conformity issues.

An excellent Engineer with industry proficiency in 2D/ 3D dimensional inspection, Knowledge of geometric measurements and CMM. She is equipped with rich experience, quality control background with eagle eyes and if obtained a certification of ISO 13485/ 9001 Quality Management Systems Internal Auditor added an advantage.

A reliable, trustworthy and competent professional whose approval will be necessary for the continuation of a business life cycle. The goal of the quality management system is to assure the high quality of our operations and services aiming to the long-term success of our business.

Duties & Responsibilities

1. Conduct the training of ISO 9001:2015/ 13485:2016 for work procedures to operation and production

2. In-house training to guide inspectors, technicians and other staff for engineering symbol & geometric dimensioning & tolerance drawing quality specification

3. Supervise equipment and tools are duly calibrated

4. Devise procedures to inspect and report quality issues

5. Assure the reliability and consistency of production by checking processes and final output quality of finished parts/ components and materials

6. Monitor all operations that affect quality

7. Report all malfunctions to production manager to ensure immediate action

8. Implement corrective action (CAR) / non-conforming report to operations effectively

9. Facilitate proactive solutions by collecting and analysing quality data

7. Keep records of quality reports, statistical reviews and relevant documentation

8. Review current standards and policies, work procedure (SOP), and update written procedures (DCN), engineering work instructions or specifications (ECN)

9. Work as a team to evaluate, validate customer quality issues and complaints, or/ and special quality requirements from customers for quality assurance on geometric symbol, tolerance and dimensioning

10. Communicate with external quality assurance officers during on-site inspections

11. Appraise customers’ requirements and make sure they are satisfied

12. 5.5-day work week

Requirements

Ability to read and interpret engineering drawings is a strong advantage

1. Degree/ Diploma in engineering or relevant field

2. Proven experience as a quality assurance engineer or relevant role

3. Thorough knowledge of methodologies of quality assurance and standards

4. Excellent numerical skills and understanding of data analysis/statistical methods

5. Resourceful and attention to detail and a results driven approach

6. Excellent organizational and leadership abilities with good communication and interpersonal skills

Responsibilities :

● Create and maintain automated test cases, test plans and test framework ensuring that they are up to date with requirements and policy changes

● Create, maintain and improve the automated test framework and test environments

● Conduct testing on new features and file defects

● Perform various tests such as manual/functional/performance/exploratory tests and support UATs

● Assist in resolving production cases

Requirements :

• Bachelor’s degree in Computer Science, IT or related fields
• At least 3 years of professional software quality testing experience with hands-on automation
• Strong understanding of testing techniques, risk analysis
• Strong understanding of test-driven development, continuous integration and continuous delivery
• Proficiency in programming languages such as Java or Kotlin. Knowledge of Spring Boot will be an advantage
• Experience with open-source automated testing frameworks such as Cucumber, TestNg and Playwright
• Experience with open-source performance testing tools such as JMeter, Gatling, Locust or enterprise level tools such as HP LoadRunner
• Experience with open-source penetration testing tools such as ZAP, Burp Suite, SQL Map or enterprise level tools such as HP WebInspect, Nessus, CheckMarx
• Experience working in SCRUM teams
• Excellent communication and collaboration abilities
• Proactive, self-driven and motivated

Our client is a US MNC and a Fortune 500 Company that provides Design and Manufacturing solutions to the customers worldwide. They are currently hiring for a Quality Director and will like to invite interested candidate to submit your detailed resume to [email protected]

Quality Director

Responsibilities:

• You will be part of the site Management Team
• Manage entire site Quality system which includes Medical system
• Responsible for all product quality issues, including managing internal and external communication on product qualities.
• Identifies on-going quality issues and makes recommendations to improve current processes
• Interfaces with customers, suppliers, engineering and operational groups on quality related issues
• Responsible to lead 5S & 6 sigma initiatives for the Region
• Provides training in statistical concepts and techniques
• Establish, review & approve quality control methods and procedures
• Plays a key role to provide guidance to site with respect to maintaining quality excellence

Requirements:

• Degree in Mechanical or Electronic / Electrical Engineering or Quality Management with minimum 10 years relevant experience in Quality &/or Management capacity preferably in EMS environment & prior experience in handling FDA audit is preferred
• Excellent knowledge & implementation experience in Six Sigma
• Formal training in ISO Lead Auditor is a definite advantage
• Familiar with ISO-13485 & TL (Telecommunication ) system
• Strong skills in facilitation, analysis & problem solving
• Experience in analyzing of various processes barriers and using TPM methodology to drive improvements and inspection to support operations
• Candidates with Black Belt or Master Black Belt in Lean / Six Sigma will have added advantage
• Ability to work independently with excellent interpersonal relations and deep passion for driving product quality are essential

Job Description & Requirements

Perform inspection including the use of gages and equipments and document quality paperwork meeting the Engineering Print, Job Instruction Sheets and/or the QMS Instructions. To support all CORE, EH&S and Continuous Improvement activities.

Roles and Responsibilities

• Perform job inspection at first piece, in process and final inspection per the Job Instructions Sheet plans.
• Perform First Article Inspection (FAI) and Delta FAI per AS9102 requirements.
• Perform dimensional inspection using a variety of inspection gages & equipment.
• Initiate Quality Notification (QN) for non-conformance when products are not meeting Quality and Engineering requirement.
• Perform proper use and maintenance of gages and inspection equipment.
• Perform proper documentation including inspection stamping of quality paperwork.
• Maintain and improve 5S standards on workstations and responsible areas.
• Good communication and interpersonal skill and ability to communicate with all levels.
• Adhere to company EH&S policies and guidelines.
• Adhere to company Quality Policy.

Qualification and Education Requirements

• Minimum Education required (specific field or equivalent):
• NITEC qualification in Precision/Mechanical Engineering or higher.
• Minimum years of experience in role: At least 2 years of working experience in a quality control environment.

Preferred Skills (if any):

• Able to interpret basic technical (GD&T) drawings.
• Proficient in using hand gages; micrometer, dial indicator, height gage etc.
• Good command of written and spoken English.
• Basic operating knowledge of Co-Ordinate Measuring Machine (CMM) inspection; Carl Zeiss / Wenzel CMM.
• General proficiency of Microsoft Excel and Microsoft Word (SAP a plus).
• Non Destructive Testing (NDT) method in MPI Level 2 will be an added advantage.
• Able to perform weekly rotating shifts.

Working Location: Bedok South

质量工程师（Quality Engineer)

Responsibilities:

To manage the Quality Assurance & Quality Control (QA/QC) function so that quality products/services are supplied.

Liaison with customers, consultants, engineers, inspection bodies and suppliers on matters relating to quality assurance.

Coordinating with Production/Plant Managers to conduct investigations on quality deficiencies.

Conduct site visits to ensure that quality of products supplied is within design parameters.

Co-ordinate all QA/QC operations to ensure that customers are satisfied with the level of products/service provided.

Co-ordinate with the Sales and Production Departments to ensure that customer complaints are professionally and efficiently resolved.

Develop QA/QC systems and set achievable targets

Ensure Production comply with quality procedures.

Assist Project Management team on project/safety for daily activities and Quality Management

Work with Production Manager and Plant Manager to minimize defects

Comply with all requirements for the continuity of ISO certifications

Requirement:

Relevant Qualifications in Engineering or equivalent

possess training certificate in ISO Quality Management System, Quality Engineer, CONQUAS, BCA-Good Industry Practices would be advantageous

Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity

Strong communication and interpersonal ability, coupled with influencing skills

Independent and a self-starter, with strong personal drive to initiate and implement

Quality Controller/GAP Coordinator

Job Description

The Quality Control/GAP Coordinator is responsible for ensuring all products received perishable and nonperishable are of standard as per the company’s specifications. This role must also ensure supply security and FIFO practices.

Scope: Singapore (Choa Chu Kang farm)

Working Days: 5.5

Reporting into: Head of Farm Operations

In This Role You Will (Responsibility):

· Ensure incoming and outgoing goods (perishable and non-perishable) meet company and GAP standards.

· Daily inspection of production areas to ensure compliance with company and GAP standards.

· Analyse quality data and summarise findings.

· Generate inspection reports.

· Conduct quality assurance reports.

· Conduct internal self-audits of processes and procedures.

· Prepare quality assurance documents in compliance with local regulations and GAP standards.

· Ensure quality testing (shelf-life samples) and laboratory microbial testing is done in accordance with GAP standards.

· Ensure staff training is done to comply with GAP and Food Safety requirements.

Traits

• Continuously learning and challenge the status quo.
• Willingness to join and grow with a dynamic company.
• Strong bias for action.

· Must be energetic and hands-on to take on new and challenging tasks and to work well with limited resources and a strong sense of accountability.

Assist operation in problem solving and execute improvement initiatives

Key Responsibilities

Functional and Automation testing experience including tools such as Selenium, UFT, JIRA, Postman

• Degree in software engineering, computer engineering, electrical engineering or infocomm-related discipline
• Must have professional software quality testing experience with hands-on automation
• Strong understanding of testing techniques, risk analysis
• Strong understanding of test-driven development, continuous integration and continuous delivery
• Experience with automation scripting (i.e. Python and shell scripts)
• Experience with open-source automated testing frameworks (i.e. RobotFramework, Selenium Webdriver)
• Experience with open-source performance testing tools (i.e. JMeter, Gatling, Locust) or enterprise level testing tools (HP LoadRunner)
• Experience with open-source penetration testing tools (ZAP, Burp Suite, SQL Map) or enterprise level penetration testing tools (HP WebInspect, Nessus, CheckMarx)
• Working experience in Agile environment will be an added advantage
• Excellent verbal communication and listening skills
• Proactive, self-driven and motivated

Main duties and responsibilities :

1. Incoming QA(IQA) and Outgoing QA (OQA) Inspection
2. Quality Wall (QW) buy off
3. Weekly process audit
4. Non Conformance Material Report (NCMR)

Experience and knowledge :

1. Min "O” level with 3 years of related experiences in a manufacturing environment.
2. Knowledge of Microsoft (words, excel and ppt) is a must.
3. Knowledge of Stamping, Plating, Molding and Connector Assembly is an added essential.

Skill Required :

1. Good knowledge on measurement methodology and equipment (profile projector, TM scope, OGP smart scope).
2. Exposure in Process and QMS Audit.
3. Knowledge of Quality tools such as SPC and 7 QC tools.
4. Good interpretation of product drawing, specification and Inspection Plan.

Job Requirement :

1. Able to work independently
2. Able to work rotation shift

About NETS

The NETS Group is a leading payments services group, enabling digital payments for merchants, consumers and banks across the entire payments value chain.

The Group operates Singapore’s national debit scheme enabling customers of DBS Bank/POSB, HSBC, Maybank, OCBC Bank, Standard Chartered Bank and UOB to make payments using their ATM cards or mobile devices at more than 130,000 acceptance points in the country as well as online payments.

Position Overview

Quality Checker team of Card Centre performs quality checks on every card mailers after card personalization, ensuring that we meet our service level on accuracy.

Key Responsibilities

• Responsible for performing quality checks on Bank cards
• Meeting Service Levels of the Banks
• Performing end day reconciliation for internal reporting
• Other ad-hoc duties

Requirements

• Minimun qualification, Nitec
• Prior working experience in production line highly preferred
• Meticulous & eye for detail
• Must be able to commit 5.5 days work week

• To assist the Project Manager or Project Engineer in the daily execution of work.
• To supervise the work of sub-contractors and in-house workers.
• To work closely with other site operations staff to meet the project schedule.
• Ensure installation is carried out as per construction drawings.
• To monitor the progress and quality of work being performed by workers.
• Ensure that works are executed within an acceptable standard of workmanship.
• Attend the daily tool-box meeting and convey clear instruction accordingly.
• Understand and ensure compliance in project requirement and scope of work.

Requirement

• At least 3 Year(s) of working experience in the related field is required for this position.
• Experiences in Structural Steel will be advantageous.
• Highly proactive attitude, self-motivated, team player, strong problem-solving and communication skills.

• Facilitates planning and development ofquality control systems for specifiedproducts or processes.
• Collaborates with teams of engineers andproduct specialists to ensure customer anddivision quality requirements are met.
• Identifies the root cause of qualityproblems, and coordinates modificationsor other corrective actions.
• Liaising of Calibration Program.
• Periodically inspect instrument accordingto the specified schedule date
• Reviews design, manufacturing, and testingdocumentation.
• Update our Quality Management system(QMS) with incidents, fixes andimprovement.
• Offers technical guidance and support inresponse to quality testing and analysis.
• Ensures contract compliance by reviewingand approving quality requirements forsupplier purchase orders, manufacturing,and other related services.
• Performs other duties as assigned.

• To assist the Project Manager or Project Engineer in the daily execution of work.
• To supervise the work of sub-contractors and in-house workers.
• To work closely with other site operations staff to meet the project schedule.
• Ensure installation is carried out as per construction drawings.
• To monitor the progress and quality of work being performed by workers.
• Ensure that works are executed within an acceptable standard of workmanship.
• Attend the daily tool-box meeting and convey clear instruction accordingly.
• Understand and ensure compliance in project requirement and scope of work.

Requirement

• At least 3 Year(s) of working experience in the related field is required for this position.
• Experiences in Structural Steel will be advantageous.
• Highly proactive attitude, self-motivated, team player, strong problem-solving and communication skills.

Roles & Responsibilities:

1. Lead and direct high-pressure construction projects, ensuring uncompromising quality and meeting stringent deadlines.

2. Adapt sun exposure or hazard environment

3. Need to hands-on and do not mind to getting hands dirty

4. Must be able to work in day or night shift if required

5. Must be able to work in weekend or public holidays if needed

6. Collaborate seamlessly with stakeholders, architects, and vendors to overcome complex challenges.

7. Present detailed reports, providing effective solutions for critical issues promptly.

8. Exhibit unwavering flexibility, working extended hours, weekends, and frequently traveling between sites.

9. Any other ad-hoc duties assigned

Requirements:

1. 5+ years of hands-on experience in construction, with at least 3 years in a high-pressure leadership role.

2. Must have deep knowledge in Electrical Works & Air-Conditioning and Mechanical Ventilation (ACMV) Works also.

3. Expert knowledge of cutting-edge construction equipment, safety protocols, and industry best practices.

4. Proven ability to thrive under extreme pressure and maintain composure in challenging situations.

5. Excellent communication and conflict resolution skills for effective team management.

6. In-depth knowledge in a field of Construction, Electrical, Plumbing & ACMV works, coupled with exceptional problem-solving capabilities.

7. Physical stamina to perform demanding on-site duties.

8. Must be able to travel to sites using public transport; if company transport not provided.

9. Willingness to travel extensively and work in varied environmental conditions.

Work Location - Near Aljunied MRT

5 days work week

Roles & Responsibilities

This position is responsible for conducting audit checks to ensure that products meet the established standards, This role also supports the achievement of Company quality target.

1. Confirm to quality standard and quality processes

· Inspect in-coming and outgoing products according to policies standard.

· Perform all product processes within section (eg, QC, SAO), Reworks, Repairs, Defective photo-taking)

2. Contribute to continuous improvement

· Maintain Integrity accuracy and completeness of Supplier invoice data and QC data in system

· Establish standard operating procedures and conditions for handling storage and checklist of stock.

3. Perform other ad-hoc duties as assigned.

Requirements

· At least 1 year of experience in Gold quality control in retail jewellery or quality control experience in manufacturing

· Those with more years of experiences will be considered for the senior executive position

· At least Diploma in any discipline

· Basic understanding of production methods.

· Attention to detail

· Able to use basic MS Office.

· Good Communication and Interpersonal Skills

· Able to multi-task and quick learner

• Check Credit Compliance in accordance to Bank's Credit Policy and internal Policies
• Perform security and documentation compliance checks
• Check & authorise Loan Disbursements and Facilities Line implementation
• Review data entries done by maker via the various systems
• Check reports on all transactions carried out by staff

Requirements

• At least 3 years of operations experience in company credit & loan operations
• Possess relevant experience in credit control - credit compliance review per credit policy, security documentation and perfection
• Review legal guidelines, legal conveyancing, facility limit management and collateral processing
• Must be responsible, committed and diligent; Be a good team player with integrity
• Able to work under pressure especially when deadlines are tight or when there is increased volume
• Works fast and in a meticulous manner
• Strong in PC skills and Microsoft Office (Excel, Powerpoint, Word)
• Good project management, system management, interpersonal and communication skills

- Mainly in charge of sourcing material, ordering, and delivery item to workplace

- Follow up ordering and delivery status

- Record all purchased materials and ensure everything is tally with purchase record

- Coordinator with supervisor or project in charge person for item request purpose.

- Provide admin duties and clerical supports to project team·Update manpower movement constantly·

Working time:5 working days (9am - 6pm)

Working location: Kranji

Our Client:

• Cranes Lifting Industry
• 5 Days, Office Hours
• West Region
• Up to $4300 Per Month

Responsibilities:

• Investigate all incidents and product nonconformity to identify causes and ways to prevent occurrence in future.
• Support and promote the company incident report and management system.
• Provide guidance to business on consistency of HSE and QMS expertise by participating in Management reviews and audits.
• Monitor company’s ISO 9001 Management System are implemented and maintained in Singapore and Malaysia.
• Control of system documentations and procedures for Southeast Asia including Australia.
• Coordinate with business on training and holding of dialogue sessions with relevant customers, contractors, suppliers to ensure awareness and compliance with all HSE requirement impacting company operations.
• Ensure quality procedures are adhered throughout organisation and highlight noncompliance.
• Conduct quality check and inspection on manufacturing and installation processes pertaining to current range of products.
• Recommend quality control and inspection requirements in consultation with regional HSE and QMS whenever necessary for final review and approval by region director for implementation.
• Participate in HSE committee meetings and implement HSE procedures and standards in all workplace activities to achieve the required safety standard.
• Chair monthly QIP meeting and submit monthly quality report.

Requirements:

• Qualification in Engineering, Safety or Quality.
• Minimum 2 years of working experience in QA/QC in a manufacturing or construction environment.

For interested applicants, please click "Quick Apply”

We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Quay Choon Lan Joanne (Guo Chunlan) | EA Reg No: R24121479
JTE Recruit Pte Ltd | EA Lic No: 14C7215

Carry out pest control services to our island wide clients that varies from Government Sector, Industries and Construction developments.

Requirements:

Class 3 Driving License (Manual), PSLE with no experience - OJT and NEA course will be provided.

· To assist Fumigator in carrying out fumigation & pest control services in accordance with regulatory requirements

· Notify Supervisor immediately of all incidents which are of material importance to the company such as accidents/near-misses/safety breaches/customer complaints followed by written report

· Check and ensure that all material/equipment/resources required for the day's work is available in the vehicle and in good working condition

· Always maintain sufficient stock of supplies and to submit requisition for replenishment if stock runs low.

· Maintain all equipment on board the vehicle in good working condition and to report damages/uncalibrated items immediately

· To ensure accurate reporting of fumigant stock in the vehicle at the end of each working day

· To be able to manage client's expectations and requests at work site and perform decision making if the team is able to accede to the demands within their limits, else TL will need to escalate to the Supervisor

Requirement:

1.) Driver’s License (Class 3) Required

2.) Vector Control Technician Licence

3.) Completed the following training

a.) Forklift Driver’s Licence

b.) Scissor lift Certificate

c.) Basic First Aid Course Certificate

d.) WAH Supervisor Certificate

4.) Fluency in spoken & written English

5.) Good planning and time management skills

6.) Physically Fit

7.) Ability to work in Teams, and supervise junior technicians and assistants

8.) Good interpersonal skills

9.) Good customer service skill

Job Desceription

- To carry out pest control services at vacious client premise such as town council , F&B and commercial building .

- To complete and submit service report to client upon every job completion .

- Any other task assigned by superior

Requirement

- Experioence / Without experience are welcome . Training will be provided .

- Retiree who wish come back for work are welcome .

- Min PSLE or equivalent .

- Have Class 3 Diving Licence will be advantange .

- Physical Fit

- Able to read and write simple english

- Work week : 5.5 weeks

Responsibilities:

• Design and develop machines control systems, with motion controller, robot, PLCs, HMIs, and servo drives.
• Create detailed electrical schematics, wiring diagrams, and layout drawings.
• Program and configure control systems to meet specific project requirements.
• Source and select control components based on project specifications.
• Execute control system setup, including IO system configuration, servo and step drive setup, and axis tuning.
• Conduct testing, debugging, and troubleshooting of control systems.
• Collaborate with mechanical engineers, software developers, and other stakeholders to integrate control systems into larger machinery.
• Ensure compliance with relevant safety standards and regulations.
• Participate in project planning, including cost estimation, scheduling, and resource allocation.
• Stay updated with the latest industry trends and technologies to continuously improve control
  system designs.

Requirements:

• Diploma or bachelor’s degree in electrical engineering or a related field.
• Minimum 3 years of experience in designing and implementing control systems for electrical machines.
• Proficiency in programming PLCs, HMIs, and motor drives.
• Experience with CAD software for electrical design (e.g., AutoCAD Electrical, E3, EPLAN).
• Strong knowledge of control theory, electrical circuits, and automation.
• Familiarity with industry standards and regulations (e.g., IEC, IEEE, NEC).
• Experience with robotics and motion control systems.
• Knowledge of communication protocols (e.g., Ethernet/IP, Modbus, CAN).
• Experience with simulation software (e.g., MATLAB/Simulink).
• Certification in Control Systems Engineering (CSE) or related credentials.

Please include the following information in your resume.

• Current & Expected Salary
• Reason(s) for leaving
• Notice Period / Availability to commence work

By submitting any application or resume to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

We regret only short-listed candidates will be notified.

EA License | 18C9251 WGT Group

Registration No | R22111484 Ketty Lim

Our client is an international freight-forwarder and shipping company. Due to expansion, it is seeking like-minded individual who is experienced in Control Tower Operations (Air and Sea freight) to join their team. The role requires more than operational experience - requires management experience who's willing and able to perform ground work for now, to kick off the South East Asian operation.

Responsibilites:

• Handles end-to-end all the operations for air & sea bookings, including document handling and creation.
• Agent and partner communication and tracking throughout the process.
• Internal communications between offices/ clients on shipments.
• CargoWise file creations and management.
• Ensure systems are kept up to date throughout the process.
• Ensure processes are being adhered to throughout shipping process.

Requirements:

• Minimum 3 years experience in Logistics
• General knowledge of Imports / Exports / General Logistics / Warehousing/ Customs / Rate Understanding
• Sea freight and Airfreight knowledge (Importing and Exporting / Cross Trades)
• SE Asia Knowledge
• Microsoft Office: Word / Excel / Microsoft Outlook
• CargoWise (if possible)
• Well groomed. Team-orientated. Enthusiastic, Passionate, Energetic, Proactive, Organized and self-motivated.
• Determined to progress in career and grow the business
• Good planning skills and very organized in ones work priorities.
• Willing to learn outside of specific job role
• Prepared to work overtime and not afraid of increased workload
• Able to deal with conflict and be able to confront people on issues

Interested candidates are invited to send in your resume in MS Word Format stating your past work experience, reasons for each leave, past and expected remuneration.

We regret to inform that only shortlisted candidates will be notified.

By submitting an application to us, you will be deemed to have agreed for us to collect, use and disclose your personal data which you have submitted to your prospective employers, for the purpose of job search, and/or other services which you have consent us to perform on your behalf.

EA License: 19C9782 (Cultivar Asia Pte Ltd)

EA Personnel: R1326341