• Ensure appointed MV VCD and MV motor suppliers supply equipment that meets project specificatiions.
• Ensure appointed LV MCC panel suppliers supply electrical panel (MSS with DOL, soft-starter, 2 speed, LV VSD starters and control circuit of motor starter) that meets project specification.
• To coordinate with different stakeholders subcon, suppliers, main con and consultant with regard for detail design development of the LV MCC, MV, VSD and interfacing work between subsystem work package.
• Prepare FAT & SAT test plan for 6.6 kV MV VSD and MV motor.
• Prepare FAT & SAT test plan for LV MCC.
• Update SLD drawings for tie-in to upstream incomers and all downstream ACMV equipment.
• Update Low Voltage cable sizing & short circuit calculation.
• Update actual demand load calculation.
• Prepare discrimination study with all upstream incoming breakers for both MV 6.6kV and LV 400V equipment
• Attend meeting with suppliers, main contractor and consultants to provide reasonable explanation, possible solutions and guidance if they are in doubt.
• Ensure all cable routing with their associated wall openings and / or cable risers are provided for all 6.6kV and 400V ACMV equipment.

Requirements

• At least a Diploma in Engineering majoring in MEP / Electrical or related field.
• Minimum 8 years of working experience. Those with more years of experience will be considered a senior position ie Senior Engineer / Assistant Manager
• Those with Construction Industry (majoring in Electrical Control for ACMV) will be an added advantage.
• High level of initiative, independent, meticulous and able meet tight timeline.
• Able to work under pressure.
• Good command of English and computer literacy.
• Proficient in Ms Excel.
• Those with knowledge of AutoCad, Revit, Microstation and Primevera software will be an added advantage.
• Willingness to work at Tuas area with transportation pickup at designated MRT stations.

Primary Responsibilities:

• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have a good understanding in the technical execution of process plant systems within intricate water industry.
• The candidate shall have good proficiency in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design consultancy and delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS).
• The candidate shall have good knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall provide estimates and feedback for the Proposals department as required
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall Ensure that design takes full regard for all health and safety requirements.
• The candidate shall support and help resolve any site technical difficulties & other problems that may arise.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 3 years experience in instrumentation, control and automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Job Description:

• Assist Resident Engineer in daily close supervision and coordination duties
• Inspect and supervise Contractors’ works and tests to Approved Drawings and Specifications
• Participate in construction interface meeting for Instrumentation, Building Services (ELV) systems
• Checking BIM Model and interface with C&S team for the completeness of site clearance for Instrumentation construction activities
• Review of design deliverables for Instrumentation, Building Services (ELV) and release of IRF’s to contractor as per RE’s instructions
• Update of Daily Site Reports (DSR), maintain quality records of all works, monitor and report on work progress
• Responsible for the consistency of quality assurance inspections and testing for works
• Implement quality assurance plan in a well-coordinated manner
• Coordinate with Contractors on execution of works
• Participate in FAT activities and punch list follow up
• Participate in SAT, Commissioning of Instrumentation, Building services (ELV) activities till the final handover of the project

Job Requirements:

• Diploma in Instrumentation Engineering
• Registered as Resident Technical Officer with the Joint Accreditation Committee of the Institution of Engineers Singapore / Association of Consulting Engineers Singapore
• At least 5 years of relevant experience in quality assurance inspections on large infrastructure project or waste/water management projects in Singapore, particularly Instrumentation, Control, Automation and Building Services (ELV) systems

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have a good understanding in the technical execution of process plant systems within intricate water industry.
• The candidate shall have good proficiency in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design consultancy and delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS).
• The candidate shall have good knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall provide estimates and feedback for the Proposals department as required
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall Ensure that design takes full regard for all health and safety requirements.
• The candidate shall support and help resolve any site technical difficulties & other problems that may arise.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 5 years experience in instrumentation, control and automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Description

• Perform troubleshooting, service & calibration work both at site & in-house
• Performs periodic, predict, preventative, repair and maintenance services for Company’s equipment and associated controls
• Overhaul, install, calibrate control valves and field instruments
• Supervising & managing of Sub-contractor to carry maintenance & servicing works
• Record servicing & maintenance data and generate service report

Requirements :

• Possess NITEC/Higher NITEC/Diploma in Mechanical / Mechatronics Engineering
• Communicate effectively, Customer orientation, Flexibility and self learning
• Can do attitude, Teamwork
• Energetic and good interpersonal skills
• Candidate without experience are welcomed to apply

We regret that only shortlisted candidate(s) will be contacted.

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Engineer, Instrumentation & Control for the next phase of their business. They are located in West.

Duties:

• Provide technical support for Production and Maintenance teams on instrument-related issues.
• Work with teams to reduce instrument maintenance costs and improve functionality.
• Coordinate with external stakeholders on gas pipeline networks, electrical grids, instruments, and metering interfaces.
• Update maintenance procedures for instruments, PLC, Fire & Gas systems, ESD, metering, CCTV, and security equipment.
• Conduct root cause analysis for instrument incidents and recommend preventive actions.
• Implement MOC projects to enhance instrument reliability and operational efficiency.
• Ensure verification, inspection, testing, and certification of electrical and instrument equipment in hazardous areas.
• Support maintenance and major equipment turnarounds.
• Manage the functional safety lifecycle of SIS in the terminal.
• Assist in expansion projects, ensuring facility integrity and seamless integration.
• Participate in emergency response with designated roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in instrument & control maintenance

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Description

• Industry/ Organization Type: System Integration
• Position Title: Electrical Engineer
• Working Location: West (Nearest MRT: Tuas Link) – take 6 bus stops to reach the company
• Working Hours: 5 days (Monday to Friday: 9 am-6 pm)
• Salary Package: Up to SGD 4000 + AWS + Variable bonus
• Duration: Permanent

Key Responsibilities

• Design and prepare electrical drawings for control panels
• Sizing of cables, CB, and other components for control panels
• Instructing technicians on assembling control panels
• Supervising and instructing technicians during offsite maintenance or repairs of control panels
• Able to troubleshoot and repair electrical faults in control systems
• Program and configure VFD, temperature controller, and other devices
• Managing and organizing the equipment and inventory on the shop floor

APPLY NOW!!!

• Min. Diploma in Electrical Engineer
• Min. 3 years of working experience in the related field, especially experience with designing and preparing electrical drawings for control panels
• Possess technical skills and knowledge of Transformers, Motors, Motor Starters, Testing and Commissioning
• Familiar with AutoCad
• Knowledge of PLC programs (ABB) will be a plus

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67518 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

• Well Established Company
• Basic $4000 - $4800 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: East
• Working day: Monday to Friday
• Working hours: 8.30am to 6pm

Job Responsibilities:

• Responsible for quality issues arising from production and customer feedback, and collaborate with the production tea to address internal process issues and implement corrective actions to resolve customer complaints with proper documentation
• Implement the quality inspection standards, on incoming, in process and outgoing inspections, and provide QA inputs to production to resolve quality-related issues at in-process and final inspections
• Responsible for timely closure of Corrective and Preventive Actions (CAPA), non-conformance investigation report and customer complaints and, publish reports on quality performance
• Lead the Material Review Board (MRB) meeting involving members from production, engineering and quality departments to conduct root cause analysis, address quality issues, implement corrective actions and review its effectiveness
• Lead the team of QC inspectors in the inspection of parts for conformity in accordance with relevant drawing requirements
• Perform any other duties, as assigned

Job Requirements:

• Minimum Diploma or Degree in Precision Engineering, Quality Management or Mechanical Engineering with 2 years of working experience in quality engineering or manufacturing

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Responsibilities:

• Daily site supervision
• Preparing and implementing project plans
• Monitoring safety procedures, production processes, and regulatory compliance
• Conducting RA
• Liaising with clients and other subcontractors

Requirements:

• Bachelor’s degree in Civil Engineering
• 4 years of relevant experience
• Strong analytical and critical thinking skills, with a high level of accuracy in calculations and design
• Great written and verbal communication skills
• Willingness to learn
• Team player and possess leadership qualities

- Responsible for preparation and timely submission of claims, variation orders, budget & cost control and settlement of final account.

- Documents preparation for sourcing of quotations for both pre and post tender stages

- Preparation of tender evaluation, conduct negotiation with subcontractors & suppliers

- To ensure a timely closure of all main contract

- Quantity take off, cost estimate, contract administrations and support in tender exercise

- Liaise with Maincontractors, suppliers, and subcontractors.

- Attend site meetings and handle contractual issues

-To attend progress meetings, technical meetings, material submission meetings and etc to capture all variation claims and potential variation works and time implication.

-All other QS related job

Requirements:

Preferably with working experiences in HDB projects

Interested candidates, please send your CV.

Job Description

• Liaise with the Project Manager to carry out architectural work scheduling, material requisition, cost control, project supervision and documentation. Inform Project Manager/ Technical Manager on any technical / site problems pertaining to architectural works.
• Manage and lead Architectural project teams by outlining and assigning work, reviewing technical accuracy and technical outcomes.
• Review reports and other documentation prepared by the Architectural Coordinators. Assist the Project Manager in the preparation of the presentation to management, clients and stakeholders.
• Manage the Architectural consultants to meet project program, design deliverables, and Authority submission and timely approval.
• Review and value-add to the designs/specifications/drawings submitted by consultants.
• Provide design and technical support / resolution to site queries / issues over the duration of Construction, as and when required.
• Conduct routine inspections on architectural works to ensure smooth progress & compliance with approved design and specification.

Job Requirement

• Degree in Architecture, recognized by the Board of Architects or Singapore PEB
• At least 8 years’ experience in Architectural coordination works with Singapore A1 Main Builder.
• Possess Qualified Professional license accredited by local authority board will have an added advantage
• Conversant with local codes and authority submissions.
• Fluent in spoken and written English and strong presentation skills.
• Proficient in Microsoft Office, Photoshop, AutoCAD, Sketch-up, Bluebeam, and Revit.
• Consultant firm experience will be an advantage.
• Strong leadership, coaching skills and organising abilities.
• Highly motivated, self-driven with initiatives to work independently.

We are seeking an experienced Construction Manager to oversee and direct construction projects from initiation to completion, ensuring timely, within-budget, and high-quality delivery.

Job Description:

• Develop project schedules, budgets, and resource allocation plans
• Manage construction activities, including site supervision.
• Ensure compliance with safety regulations, building codes, and quality standards.
• Coordinate with subcontractors, suppliers, and labor forces.
• Monitor progress, identify and mitigate risks.
• Ensure project documentation and records are maintained.
• Conduct regular site inspections.
• Identify and address defects or deficiencies.
• Ensure compliance with safety regulations

Requirements:

• Degree/Diploma in Construction Management, Engineering, or related field.
• Min 3 years of construction management experience
• Strong knowledge of construction methods, materials, and regulations.
• Excellent communication, leadership, and problem-solving skills.

We are looking at driven individual to take up the role of quantity surveyor. It is good to know background knowledge on how to use autocad. We are looking at expansion of our organisation and hopeful of individual could join us in this journey. We focus mostly on architect products such as aluminium ceiling and cladding works

Responsibilities:

• Review, update and coordinate all architectural work including shop drawings for the project and resolve drawings discrepancy.
• Liaise, supervise and coordinate with sub-contractors and vendors on projects and work.
• Ensure compliance with Architectural specifications, and achieve quality aspect of architectural works.
• Coordinate with architect, structural engineer and M&E engineer to resolve construction problems and issues.
• Carry out architectural works scheduling, material requisition, cost control, project supervision and documentation.
• To assist Project Manager to develop project requirements, specifications and tender clarifications.
• To attend to construction site coordination works and meeting.
• Carry out daily supervision and coordination of all architectural implementations at site.
• Prepare any necessary construction method statement and technical proposal to ensure smooth transition of works.
• To liaise with RTO for inspection and resolve and monitor rectifications.
• Coordinate all architectural drawings and works, submit and update status of shop drawings and materials as well as supervise work progress.
• Liaise closely with consultants and sub-contractors; conduct routine inspection of installed works.
• Other ad-hoc job assigned by Project Manager.

Requirements:

• Degree in Architecture.
• At least 4 years of relevant experience in Construction.
• Good sense of structural and architectural design.
• Good track records & working experience with MNC / A1 / A2 main contractors preferred.
• Experience in handling HDB BTO project is referred.
• Good communication and people skills.
• Excellent time management skills with the ability to multi-tasks.
• Able to work independently without supervision.
• Able to work 5.5working days per week at HDB Construction site.

Responsibilities:

• Lead the site supervision team on all the Civil and Structural and Building Construction works.
• Assist Chief Resident Engineer and Construction Manager on all Civil & Structural site inspection issues, contract related matters and support the identification of defects and supervise rectification works.
• Address and respond to all Contractor's RFI's and technical submittals. Other work scopes include but not limited to assess method statements/instrumentation reading, coordinate with other discipline engineers and liaise with design team/QP from HQ.
• Attend all site/project related meetings, discussions with clients and/or Contractors and to lead in technical and work progress discussions.

Requirements:

• Good graduate Degree in Civil & Structural Engineering, preferably recognised by the PE Board, Singapore.
• Minimum 10 years of construction experience in supervising civil and structural works in water/used water treatment works.
• Registered with IES as Resident Engineer (Civil).
• A person with good communication and leadership skills.

RC-site supervisor

Have on-site management experience, be familiar with drawings, be able to understand RC working process,

Master basic English and be able to communicate skillfully with Bangladeshi and Indian workers.

Have experience working in HDB Project , familiar with HDB handover process and inspaction standards

Hodling the certificate of safety supervisor, work at high supervisor.

Responsibilities:

• Lead and guide the quantity surveying team in contracts administration to ensure quality and timely delivery of their assigned tasks and responsibilities.
• Negotiate with subcontractors and monitor their performance to ensure compliance and adherence to project timelines.
• Advise and resolve requests for equitable adjustments, contract disputes, and claims with clients, consultants, and subcontractors.
• Prepare and monitor project cost budgets and cash flow, track changes in design/construction work, manage variations, and adjust budget projections accordingly.
• Collaborate closely with the project team and oversee the quantity surveying team in the analysis, evaluation, and negotiation of quotations to ensure timely awarding of contracts to subcontractors and suppliers.
• Draft contractual correspondence and ensure the timely finalization of accounts with clients and subcontractors.
• Participate in the project tender process, including leading the team in tabulating quantities and pricing.
• Perform other duties as assigned.

Requirements:

• Degree in Building, Quantity Surveying, or equivalent.
• At least 8 years of relevant experience in the full cycle of construction project administration.
• Experience working in a Singapore Consultant Company is preferred.
• Experience with Singapore A1 Main Contractors and HDB BTO projects is an advantage.
• Strong planning and organizational skills to meet deadlines.
• Essential knowledge of cost economics.
• Strong command of English.

(A) Essential Job Functions:

The Construction Manager is responsible for, but not limited to, the following:

• Review and prepare method statements for submission to the client.
• Manage a construction project team and oversee the construction activities, planning, implementation, and monitoring of work schedules in accordance with the master and detailed construction program.
• Ensure progress according to schedule, quality standards are maintained site inspections are carried out and technical issues are resolved on time.
• Monitor ongoing site activities and ensure work runs smoothly.
• Liaise and coordinate with clients, designers, consultants, subcontractors, and different authorities on the project’s activities.
• To perform Ad-Hoc duties as per assigned.

(B) Minimum Qualifications/ Job Experience:

• Degree in Civil Engineering or its equivalent, preferably recognized by Professional Engineers Board of Singapore.
• Proficient in both MS Office, MS Project and AutoCAD.
• At least 15 years working experience and 8 years’ experience in managing civil engineering project.

(C) Knowledge/ Skills/ Abilities:

• Good knowledge of local authority requirements and engineering standards.
• Working knowledge of general construction, especially in civil engineering project.
• Good verbal and written communication skills.
• Strong organizational and interpersonal skills.
• Strong time management skills with exceptional attention to detail and ability to manage multiple tasks / projects at one time.
• Ability to analyse and synthesize complex issues quickly.
• Able to work overtime and be on standby when required.

• Inspect the interior or surfaces that need tiling
• Provide estimates for the number of tiles, installation time and costs
• Clean walls and floors in preparation for tiling work
• Remove old grout and cement from surfaces
• Fill gaps, cracks and holes in floors and walls
• Level uneven walls, floors and other surfaces with plaster
• Spread adhesive onto ready surfaces and tiles, then set tiles in position
• Make tiles to flush with corners, edges and fittings
• Ensure proper spacing and alignment of floor and wall tiles
• Grout tiles and apply waterproofing systems to surfaces
• Lay coloured tiles in patterns to create eye-catching mosaics

Help supervise construction and interior renovation works at residential and commercial sites.

Have good understanding of various construction and interior renovation works and materials and processes.

Have at least 5 years working experience with hands-on experience on construction work and interior renovation works including demolition works.

Can guide fellow workers on construction and interior renovation works if they face problems.

Can calculate materials cost.

Sales Executive (Supplier of Construction equipment and material)

Salary: Basic $2500 + Car Allowance $800 + Mobile Allowance $80 + Commission

Office location: Toh Guan Road- Jurong East

Working Days: Monday to Friday

Working Hours: 8:30am - 5:30pm

Responsibilities

• Manage, maintain and build rapport with clients
• Develop new accounts and grow customer base
• Diligently follow up on customers requirements
• Prepare and submit quotations
• Prepare and meet monthly sales target and collections

Requirements

• Several years’ experience preferably in sales of construction equipment and materials
• Clean driving license and own transport

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

Our client is from Construction Industry. They are looking for a WSH Officer to assist their Engineer team for the next phrase of their business. They are located Islandwide of Singapore– easily accessible. The WSH Officer is responsible for:

Duties

• Effectively lead the safety team and ensure the implementation of Workplace Safety & Health (WSH) Management Systems to minimize risks and accidents.
• Review and update all risk assessments to maintain compliance with WSH regulations and legal standards.
• Investigate on-site incidents and implement corrective measures to prevent recurrence.
• Ensure adherence to WSH Act provisions, enforce safety measures, and conduct regular inspections to ensure compliance among staff and subcontractors.
• Ensure the effectiveness of fire protection systems and emergency response management for the office and factory.
• Promote a strong safety culture through training, awareness campaigns, and employee engagement activities like drills and competitions.
• Liaise with statutory bodies, keep up to date on WSH regulations, and ensure compliance with waste management and licensing requirements.

Requirements

• Registered as WSHO with MOM
• Min 3 years of experience performing as a WSHO
• Relevant Qualification in Workplace, Safety and Health / Engineering.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115141 (Tan Su Yee)

• Handle and prepare tender submission for M&E works.
• Responsible for interpretation of specifications, compliances, terms and conditions, drawings and any other relevant document.
• Prepare tender clarifications, investigation of clarification response by communicating with relevant stakeholders.
• Assist in the presentation slide, technical write up for tender interview and attendance of tender interview.
• Suggest Value Engineering solution for MEP works and any other business, if required in the tender.

Requirements:

• Degree in Mechanical/Electrical Engineering
• At least 7 years in tender preparation and site management experience in Building Construction Projects.
• Good knowledge in M&E works, planning capability and authorities’ compliance.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R1326740

Job Description

• Industry/ Organization Type: Consulting Firm (Construction)
• Position Title: Construction Project Administrator / Project Coordinator (Civil)
• Working Location: West (Nearest MRT: Jurong East)
• Working Hours: 5 days (Mon to Fri - 8:30 AM to 6:30 PM)
• Salary: Up to SGD 3000 + Bonus
• Duration: Permanent Role

Key Responsibilities

• Perform project administrative coordination and other administrative tasks.
• Prepare, submit, and monitor project claims and invoices as directed.
• Maintain office files, correspondence, documentation, and inspection equipment
• Assist the Director/Senior Management with daily operations as assigned.
• Assist the Director/Senior Management with tendering and bidding for projects.
• Carry out technical tasks in the office and field as directed.

APPLY NOW!!!

• Min. Diploma in Architecture, Civil & Structural Engineering or Building
• Training provided to the inexperienced candidate
• Experience in the Built Environment or Heritage Built environment will be an added point
• Familiar with Microsoft Office
• Willing to work rotationally in the office and project site

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68684 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Key Responsibilities:

• Business Development: Identify and prospect new clients, particularly SME owners and MNC purchasing teams, to explore opportunities for installing solar PV systems on rooftops and walls.
• Sales Strategy & Planning: Develop and implement sales strategies to grow the solar PV market within the construction industry and materials sector.
• Client Relationship Management: Build and maintain strong relationships with key stakeholders in the construction and energy industries to drive business opportunities.
• Market Research: Conduct market research and stay updated on industry trends, competitor analysis, and market dynamics related to solar energy systems.
• Proposal Development: Prepare and deliver detailed proposals and presentations to potential clients, outlining the benefits and technical aspects of solar PV system installations.
• Project Coordination: Collaborate with internal teams (engineering, project management, and operations) to ensure seamless execution of solar installation projects.
• Contract Negotiation: Lead contract discussions and negotiations to close deals successfully, ensuring alignment with client needs and company goals.
• Sales Reporting: Provide regular updates and reports on sales activities, opportunities, and outcomes to senior management.

Qualifications:

• Proven experience in business development, sales, or account management, preferably in the construction, energy, or materials industry.
• Strong understanding of solar PV systems and renewable energy solutions.
• Ability to communicate effectively with SME owners, MNC purchasing teams, and other stakeholders.
• Excellent negotiation, presentation, and interpersonal skills.
• Strong business acumen with the ability to identify new opportunities and drive results.
• Self-motivated, goal-oriented, and capable of working independently.
• Familiarity with the regulatory landscape and incentives related to solar energy is a plus.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)