1. Construction managers must prepare and follow project budgets, manage staff, coordinate with other workers and subcontractors, and be proactive in teamwork.

2. A construction manager's day typically starts early, often with a site visit. They gather with their team, including subordinates, subcontractors, and engineers, for morning briefings. These meetings set the tone for the day, discussing project progress, safety concerns, and work schedules

3. By effectively managing planning, design, cost, scheduling, contracts, quality, safety, communication, risk, and sustainability, construction managers help deliver projects on time, within budget, and to the required quality standards.

Roles & Responsibilities:

• Applies various finishes to buildings, rooms, structures including primers or sealers.
• Prepares,cleans and tapes all jobsites.
• Able to work on hot days under sun.
• Mixes colors or oils to obtain desired color or consistency.
• Removes old paint coating, if necessary.
• Moves necessary materials around jobsite as assigned.
• Cleans up worksite debris.Capable of receiving and following instructions and communicating with foriegn workers.
• Able to do overtime.
• Able to work on public holidays.
• Able to read and adhere to labels, safety warnings, and guidelines.
• Able to work hard.
• Attentive to detail and always alert to ensure safety,

Carpenter Job Requirements and Responsibilities:

• Installs foundations, walls, floors, ceilings, and roofs using materials such as: wood, steel, metal, concrete, plastics, and composites of multiple materials.
• Fits and installs window frames, doors, door frames, door hardware, interior and exterior trim using a carpenter’s level, plumb bob, and laser levels.
• Erects scaffolding and ladders for assembling structures above ground levels.
• Studies specifications in blueprints, sketches, or building plans to prepare project layout and determine dimensions and materials required.
• Shapes or cuts materials to specified measurements, using hand tools, machines, or power saws.
• Follows established safety rules and regulations and maintaining a safe and clean environment.
• Builds or repairs cabinets, doors, frameworks, floors, or other wooden fixtures used in buildings, using woodworking machines, hand tools, or power tools.
• Assembles and fastens materials to make frameworks or props, using hand tools and wood screws, nails, dowel pins, or glue.
• Removes damaged or defective parts or sections of structures and repair or replace, using hand tools.
• Inspects ceiling or floor tile, wall coverings, siding, glass, or woodwork to detect broken or damaged structures.
• Moves necessary materials around jobsite as assigned.
• Cleans up worksite debris.

Carpenter Qualifications / Skills:

• Capable of receiving and following instructions and communicating with co-workers
• Able to read and adhere to labels, safety warnings, and guidelines
• Attentive to detail and always alert to ensure safety

Education, Experience, and Licensing Requirements:

• High school / diploma is an asset
• 4 years of experience in commercial or residential carpentry
• Ability to comprehend schematic diagrams, blueprints, sketches, building plans and other specifications
• Strong working knowledge of job site safety as well as ability to complete a company specific safety orientation

- Willing to work under the sun and overtime, weekend or holiday, shift switching and able to work under pressure and condition such as not afraid of dirty, not afraid of tired.

- Willing to work as a Construction worker, can do the timber, rebar job, able to work at project site, structural work.

- Able to operate of machine, can use construction machine, knowledge of construction safety. Experience in operating equipment like trench rammers, drills, pneumatic hammers. Knowledge of mixing and pouring construction material (concrete, sand, grout & etc...).

- At least 10 years of experience in construction industry. Manage site activities, vendors and sub-contractors，assist the Project Manager in the daily execution of work. Attend meeting, coordination, prepare works schedule & site supervision.

- Ensure installation is carried out as per construction drawings & ensure that works are executed within an acceptable standard of workmanship.

- Responsible for all aspects of site safety, proven experience as construction worker, reduce material wasting and cost saving.

- Knowledge of basic engineering and construction principles and methods, be bilingual, fluent in English & Chinese / Bangladesh.

- Any other assigned duties.

• Follow blueprints and building plans to meet the needs of clients

• Install structures and fixtures, such as windows and molding

• Measure, cut, and shape wood, plastic, and other materials

• Construct building frameworks, including walls, floors, and doorframes

• Good at fabrication kitchen cabinet

• fully operate the production

• Able to work in a team

• Hardworking and willing to accept new ideas

• Skillful

• Knowledgeable

• Dedicated to job

• Positive mind set

• Working attitude

• Productivity

• Able to work with long hours and public holiday

Roles & Responsibilities:

• Follow blueprints and building plans to meet the needs of clients

• Install structures and fixtures, such as windows and molding

• Measure, cut, and shape wood, plastic, and other materials

• Construct building frameworks, including walls, floors, and doorframes

• Good at fabrication kitchen cabinet

• fully operate the production

• Able to work in a team

• Hardworking and willing to accept new ideas

• Skillful

• Knowledgeable

• Dedicated to job

• Positive mind set

• Working attitude

• Productivity

• Able to work with long hours and public holiday

• Follow blueprints and building plans to meet the needs of clients

• Install structures and fixtures, such as windows and molding

• Measure, cut, and shape wood, plastic, and other materials

• Construct building frameworks, including walls, floors, and doorframes

• Good at fabrication kitchen cabinet

• fully operate the production

• Able to work in a team

• Hardworking and willing to accept new ideas

• Skillful

• Knowledgeable

• Dedicated to job

• Positive mind set

• Working attitude

• Productivity

• Able to work with long hours and public holiday

· To assist the Project Manager or Project Engineer in the daily execution of work;

· Inspecting construction sites regularly to identify and eliminate potential safety hazards;

· Enforcing site safety rules to minimize work-related accidents and injuries;

· To supervise the work of sub-contractors and in-house workers;

· To work closely with other site operations staff to meet the project schedule;

· Ensure installation is carried out as per construction drawings;

· To monitor the progress and quality of work being performed by workers;

· Ensure that works are executed within an acceptable standard of workmanship;

· Attend the daily tool-box meeting and convey clear instruction accordingly;

· Understand and ensure compliance with project requirements and scope of work.

Summary of Qualifications

1. Vocational Certificate in any relevant technical discipline;

2. At least 3 years of working experience in the related field;

3. Proven experience working as a Site Supervisor;

4. Good knowledge of local building codes and construction safety regulations;

5. Working knowledge of construction tools and equipment;

6. Possessed of relevant safety certification (SCWSH / BCSS / CSOC / W@H / First Aid etc.) is desirable;

7. Highly proactive attitude, self-motivated, team player, problem-solving skills;

8. Excellent organizational and communication skills;

9. May need to work on Sunday and public holiday.

· Must be able to work night shift and split shift

· Must be able to work extra hours or weekend if needed

• Well Established Company
• Basic $4000 - $4800 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: East
• Working day: Monday to Friday
• Working hours: 8.30am to 6pm

Job Responsibilities:

• Responsible for quality issues arising from production and customer feedback, and collaborate with the production tea to address internal process issues and implement corrective actions to resolve customer complaints with proper documentation
• Implement the quality inspection standards, on incoming, in process and outgoing inspections, and provide QA inputs to production to resolve quality-related issues at in-process and final inspections
• Responsible for timely closure of Corrective and Preventive Actions (CAPA), non-conformance investigation report and customer complaints and, publish reports on quality performance
• Lead the Material Review Board (MRB) meeting involving members from production, engineering and quality departments to conduct root cause analysis, address quality issues, implement corrective actions and review its effectiveness
• Lead the team of QC inspectors in the inspection of parts for conformity in accordance with relevant drawing requirements
• Perform any other duties, as assigned

Job Requirements:

• Minimum Diploma or Degree in Precision Engineering, Quality Management or Mechanical Engineering with 2 years of working experience in quality engineering or manufacturing

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Overseeing and supervising the day-to-day operations of a construction project
• Developing and enforcing safety protocols on the job site
• Communicating with the construction team, subcontractors, and other stakeholders
• Monitoring the progress of the project to ensure it is completed on time and within budget
• Managing personnel, resources, and equipment
• Ensuring the quality of work is up to the required standards
• Resolving conflicts and disputes
• Preparing progress reports and other documentation
• Ensuring compliance with local building codes and regulations
• Additional requirement: Carpentory work knowlege, selection of the work relavent materials is added requirement.
• Knowledge and supervisor skill in the install structures and fixtures, such as windows and molding. Measure, cut, and shape wood, plastic, and other materials. Construct and install building frameworks, including walls, floors, and doorframes.

We are currently looking for an Electrical, Instrumentation & Control Engineer to support multiple projects in Singapore.

Your day to day role would involve the following activities:

• Experience across a broad range of site electrical and instrumentation engineering projects; experience in industrial buildings (Pharmaceutical, Food or Mission Critical projects) would be an advantage
• Progress reporting and manhour control for the electrical and instrumentation scope.
• Participate in troubleshooting and root cause investigation
• Work closely with calibration vendor and site team

We would like to hear from candidates who have:

• Min Degree in Electrical Engineering or its equivalent
• Min 6 years of relevant working experience in loop check, read drawings in building construction industry.
• Good knowledge of electrical and instrumentation specifications & requirements
• Be able to work independently with minimum guidance and under pressure to meet tight deadlines
• A strong ethical approach to safety, quality, environmental protection and business
• A proven track record working closely in partnership with clients and contractors

Job Description

• Assess the technical and commercial feasibility of the project in line with our organization's capabilities and financial considerations.
• Create cost and effort estimates to prepare technical and commercial proposals.
• Attend client briefings to establish expectations, key performance indicators (KPIs), service level agreements (SLAs), and related protocols.
• Conduct thorough site assessments to determine the actual scope of work, associated risks, and challenges.
• Plan the manpower, materials, tools, equipment, and supervision requirements for the site while considering the budget and contract specifications.
• Develop action plans to improve the effectiveness of pest management operations.
• Procure and allocate mechanized and automated equipment for pest management tasks.
• Participate in new product launches related to pest management and service enhancements.
• Schedule work for teams to ensure efficient pest management.
• Clearly communicate roles, responsibilities, and performance expectations to site supervisors.
• Offer advice on technical and workforce-related challenges related to pest management work.
• Evaluate site operations to monitor progress and allocate resources efficiently.
• Review collected data to establish or revise procedures, protocols, and guidelines for pest management on-site.
• Enforce workplace safety and health (WSH) regulations.
• Assess the risks associated with on-site pest management and establish safety procedures and protocols.
• Resolve conflicts, grievances, and disputes among staff.
• Oversee the development of staff skills and capabilities.
• Create plans to foster strong teamwork in line with the organization's core values.
• Analyze and manage significant incidents and emergencies in collaboration with relevant parties.
• Make crucial decisions to address significant incidents and emergencies.
• Review reports related to incidents and emergency situations.
• Manage and report on incident and emergency investigations.

Requirements

• Possess with at least Diploma, Degree or above in Business, Environmental, Science or related field.
• At least 5 years supervisory experience, preferrable in environmental service experience.
• Valid Pest Control License and IRATA Level 2 / 3.
• Valid Class 3 license
• Able to multi-task and work independently, with a hands-on approach to meet a tight timeline
• Able to start work immediately or within short notice
• Experience in leading and managing a business unit preferred.
• Proficient in MS Office Word, Power Point and Excel
• Good interpersonal, communication and organizational skills
• Meticulous and pro-active
• Able to work in a fast-paced environment.

Job Description

• Assess the technical and commercial feasibility of the project in line with our organization's capabilities and financial considerations.
• Create cost and effort estimates to prepare technical and commercial proposals.
• Attend client briefings to establish expectations, key performance indicators (KPIs), service level agreements (SLAs), and related protocols.
• Conduct thorough site assessments to determine the actual scope of work, associated risks, and challenges.
• Plan the manpower, materials, tools, equipment, and supervision requirements for the site while considering the budget and contract specifications.
• Develop action plans to improve the effectiveness of pest management operations.
• Procure and allocate mechanized and automated equipment for pest management tasks.
• Participate in new product launches related to pest management and service enhancements.
• Schedule work for teams to ensure efficient pest management.
• Clearly communicate roles, responsibilities, and performance expectations to site supervisors.
• Offer advice on technical and workforce-related challenges related to pest management work.
• Evaluate site operations to monitor progress and allocate resources efficiently.
• Review collected data to establish or revise procedures, protocols, and guidelines for pest management on-site.
• Enforce workplace safety and health (WSH) regulations.
• Assess the risks associated with on-site pest management and establish safety procedures and protocols.
• Resolve conflicts, grievances, and disputes among staff.
• Oversee the development of staff skills and capabilities.
• Create plans to foster strong teamwork in line with the organization's core values.
• Analyze and manage significant incidents and emergencies in collaboration with relevant parties.
• Make crucial decisions to address significant incidents and emergencies.
• Review reports related to incidents and emergency situations.
• Manage and report on incident and emergency investigations.

Requirements

• Possess with at least Diploma, Degree or above in Business, Environmental, Science or related field.
• At least 5 years supervisory experience, preferrable in environmental service experience.
• Valid Pest Control License and IRATA Level 2 / 3.
• Valid Class 3 license
• Able to multi-task and work independently, with a hands-on approach to meet a tight timeline
• Able to start work immediately or within short notice
• Experience in leading and managing a business unit preferred.
• Proficient in MS Office Word, Power Point and Excel
• Good interpersonal, communication and organizational skills
• Meticulous and pro-active
• Able to work in a fast-paced environment.

Requirements

• Candidate must possess at least Professional Certificate in Engineering (Environmental/Health/Safety) or equivalent.
• At least 3 Year(s) of working experience in the related field is required for this position.
• Preferably Non-Executive specialized in Engineering - Environmental/Health/Safety or equivalent.

Responsibilities

The role of an Environmental Control Officer (ECO) is basically to look out for conditions/ situations in construction sites which cause environmental health problems or are likely to cause environmental health problems. He should report these conditions/ situations to the contractor together with recommendations on remedial measures to be taken to prevent recurrence.

The main areas where the ECO should pay attention to are as follows:

• Disease-bearing insects and rodents
• Proper disposal of construction waste
• Noise, air and dust pollution
• Earth littering
• Siltation of drains
• Food hygiene in canteens
• Any other environmental health matters

Job Description

• Industry/ Organization Type: General Cleaning Services
• Position Title: Pest Control Technician
• Working Location: Islandwide
• Working Hours: Monday to Friday (9 am-6 pm), Saturday (9 am-1 pm)
• Salary Package: Basic $2,000 - $2,800 + Bonus + Allowance
• Duration: Permanent

Key Responsibilities

• Conduct inspections and identify infestation sources.
• Implement targeted treatment plans using safe and eco-friendly methods.
• Educate clients on pest prevention and maintenance strategies.
• Maintain accurate records of service visits and recommendations.
• Ensure compliance with safety regulations and company standards.

APPLY NOW!!!

• Ability to work independently and in a team
• Able to commit 5.5 days a week
• Must have a valid NEA Vector Control License
• Must have a valid Class 3 Driving License

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #69357 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: General Cleaning Services
• Position Title: Pest Control Technician
• Working Location: Islandwide
• Working Hours: Monday to Friday (9 am-6 pm), Saturday (9 am-1 pm)
• Salary Package: Basic $2,000 - $2,800 + Bonus + Allowance
• Duration: Permanent

Key Responsibilities

• Conduct inspections and identify infestation sources.
• Implement targeted treatment plans using safe and eco-friendly methods.
• Educate clients on pest prevention and maintenance strategies.
• Maintain accurate records of service visits and recommendations.
• Ensure compliance with safety regulations and company standards.

APPLY NOW!!!

• Ability to work independently and in a team
• Able to commit 5.5 days a week
• Must have a valid NEA Vector Control License
• Must have a valid Class 3 Driving License

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #69357 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Responsiblities

a) Manage asphalt premix production quality control processes;

b) Conduct regular inspections and testing;

c) Analyse test results and implement corrective actions;

d) Maintain quality control records and documentation;

e) Train production staff on quality control procedures;

f) Collaborate with production and laboratory teams;

g) Develop and implement quality improvement initiatives;

h) Under the WSH Act, employees have a duty to keep their workplace and colleagues safe:

· Cooperate with employers and follow safety and health procedure;

· Report unsafe acts and incidents;

· Do not tamper with safety devices or perform wilful or reckless acts; and

i) Be responsible for any other duties that may be assigned to you from time to time as your superior / management deem fit.

Requirement

· Diploma / Certificate in Asphalt Technology or related fields

· Preferably with relevant experiences

· Well knowledge in quality control procedures and standards (ASTM, AASHTO, BS)

· Strong analytical and problem-solving skills

· Excellent communication and interpersonal skills

· Ability to interpret test results and make informed decisions

· Familiarity with quality management systems (ISO 9001)

· Proficient in Microsoft Office and laboratory software

Job Descriptions:

• Assist in maintaining and updating all the Quality Management System (QMS) Documentation
• Support the maintenance and improvement of Quality Management System
• Assist in monitoring the progress or implementation and effectiveness of Quality Management System (QMS) for relevant standards such as:

a) ISO/IEC 17020: 2012 – Inspection Body

b) ISO/IEC 17025: 2017 – Laboratory

c) ISO/IEC 17065: 2012 – Product Certification

• Assist with training in quality awareness
• Assist in keeping track of relevant quality standards, and ensure compliance and preparedness for External Audit
• Assist QA/QC Manager with Internal and External Audit
• Perform any ad-hoc duties as and when assigned

Requirements:

• Preferably a Bachelor’s Degree in Civil Engineering, Geology or equivalent
• At least two (2) years’ working experience in a similar role.
• Well-versed in quality assurance, quality control and the application of relevant accreditation standards such as ISO/IEC 17020, ISO/IEC 17025, ISO/IEC 17065 standards etc
• Excellent writing skills

Responsibilities

· Monitor strict compliance of “Permit to Work” system at worksite & explain the importance to workers at the time of safety talk/toolbox meeting.

· Coordinate Environmental Control Committee Meeting and implement all environmental control programs.

· Maintain mandatory records and other documentation as required by the regulatory authorities.

· Ensure compliance of operations with NEA and EHS regulations

· Prepare Site Environmental Control Report on a regular basis

· Conduct environmental control audit and investigations

· Able to maintain environmental requirements in line with OHSAS 18001:1999

· Ensure compliance with environmental regulations, develop environmental control plan, site clean-up plans & monitor their completion

· Advise and liaise with Project Manager and construction team on all matters pertaining to Health, Safety & Environment (HSE)Ensure compliance and practice of Company's QEHS Management System

· Oversee and lead the Safety team & subcontractors in the implementation of Company’s safety systems at sites

· Inspect and examine the workplace to ensure workplace safety compliance

· Identify safety, environmental health non-compliance and recommend measures to rectify

· Liaise with authorities and clients on matters pertaining to environmental, workplace safety issues

· Conduct & organize internal / external WSH trainings for staffs.

· Conduct incident investigations & propose corrective actions.

· Review OHSMS and provide recommendations for improvement of safety.

· Conduct regular inspection and audits on the safety provisions.

· Conduct, review & submit Risk Assessments.

· Prepare safe work procedures for site activities.

Requirements:

· Registered ECO & ECMO with NEA and PUB in Singapore

· Experienced in Construction Projects in Singapore as full time.

· Experience in managing a construction site Earth Control Measure

· Noise monitoring certificate

· Willing to work West Area.

· Good Communication Skills in reading, writing, and speaking

Responsibilities

• Organise and conduct regular credit and accounts receivable review meetings with business units and sales departments to resolve delinquent accounts.
• Follow up and communicate with customers regarding outstanding payments.
• Review and process new customer account applications.
• Maintain and update customer account details and credit limits in SAP.
• Monitor daily sales transactions for credit holds in SAP and communicate with the sales department to address overdue issues.
• Disseminate invoices, statements of accounts, reminder, and confirmation letters.
• Perform customer account reconciliations and confirmations.
• Prepare regular collections and accounts receivable status reports for management.
• Liaise with insurers to apply for trade credit insurance for customer accounts with credit terms.
• Liaise with banks regarding bank guarantees, including letters of credit.
• Verify supporting documents to carry out billings to customers.
• Perform other ad hoc duties as assigned

Requirements:

• Minimum of 1 year of relevant experience
• Proficiency in SAP software is an advantage
• Good time management skills, ability to meet deadlines, and strong attention to detail
• Good team player with the ability to work independently

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: QX3XY593

Job Description

• Monitor strict compliance of “Permit to Work” system at worksite & explain the importance to workers at the time of safety talk/tool box meeting
• Coordinate Environmental Control Committee Meeting and implement all environmental control programs
• Maintain mandatory records and other documentation as required by the regulatory authorities
• Ensure compliance of operations with NEA and EHS regulations
• Prepare Site Environmental Control Report on a regular basis
• Conduct environmental control audit and investigations
• Able to maintain environmental requirements in line with OHSAS 18001:1999
• Ensure compliance with environmental regulations, develop environmental control plan, site clean-up plans & monitor their completion

Requirements

• Candidate must possess at least Diploma/Degree in Civil Engineering or its equivalent
• Candidate must be a NEA registered ECO
• Must be a registered ECMO
• Minimum 3 years’ relevant experience in Building Construction
• With FSM certificate will be an advantage
• Must have professional knowledge in law and regulations of Environment Acts

The Production Control Analyst monitors inventory status and stock availability, and prepares orders for parts and material procurement. He/she also checks the accuracy of invoices received for spares and consumables, and maintains records in the enterprise resource planning (ERP) system. He/she plans production schedules and resources to meet production requirements and assist team members in ensuring adherence to the planned production schedules.

Job Description:

• Responsible for Monitoring and advising contractors on vector control, solid waste management, noise and dust pollution control, drainage and silt control, general housekeeping management of the project/site,etc.
• Maintain and implement the company’s Environmental (ENV) management system, ensuring compliance with regulations and standards.
• Review and suggest improvements for the ENV system to enhance effectiveness and ensure legal compliance.
• Conduct environmental inspections, address non-conformities, and ensure corrective actions are completed with evidence.
• Investigate environmental incidents (e.g., pollution, pests, waste) and recommend preventive measures.
• Develop and deliver training on pollution, pest, and waste control to maintain awareness.
• Provide advice during project planning on noise, air, water pollution, waste management, and public engagement.
• Collaborate with project teams to uphold environmental standards and company policies.

Job Requirements:

• Minimum 2 years’ experience as an ECO in the construction industry
• Preferably with recent HDB project working experience.
• Registered NEA ECO
• Possess a “Certificate of Competency (CoC) in Earth Control Measures (ECM) for Construction Site Personnel” (ie. ECMO certified), if without this certification ECO needs to obtain this within 6 months of employment at site;
• Good working knowledge of WSH regulations and practices
• Good knowledge of various regulations, policies, statutory requirements, assistance schemes, and procedures related to the industry

Job Description:

• Manage document revision control to ensure security based on business needs.
• Assist with the assessment and deployment of electronic document management systems.
• Support the Quality team by maintaining documents, uploading PDFs, and updating controlled lists.
• Oversee global implementation of materials, BOMs, and product data via the ECO process.
• Analyze, process, and track Change Orders to minimize processing time and optimize throughput.

Requirement:

• Diploma or higher in any discipline.
• Experience in process documentation preferred, with a data-driven mindset.
• Knowledge of Agile or similar PLM tools (Not Mandatory)
• Proficient in MS Office, with strong organizational and multitasking skills.

Additional Information:

• Up to $3500
• 18 Month Contract

We regret that only shortlisted candidates will be notified.

GMP Recruitment Services (S) Pte Ltd | EA Licence: 09C3051 | Remus Gan | Registration No: R21102972

Job Scope:

· To assist Fumigator in carrying out fumigation & pest control services in accordance with regulatory requirements

· Notify Supervisor immediately of all incidents which are of material importance to the company such as accidents/near-misses/safety breaches/customer complaints followed by written report

· Check and ensure that all material/equipment/resources required for the day's work is available in the vehicle and in good working condition

· Always maintain sufficient stock of supplies and to submit requisition for replenishment if stock runs low.

· Maintain all equipment on board the vehicle in good working condition and to report damages/uncalibrated items immediately

· To ensure accurate reporting of fumigant stock in the vehicle at the end of each working day

· To be able to manage client's expectations and requests at work site and perform decision making if the team is able to accede to the demands within their limits, else TL will need to escalate to the Supervisor

Requirement:

1.) Driver’s License (Class 3) Required

2.) Vector Control Technician Licence

3.) Completed the following training

a.) Forklift Driver’s Licence

b.) Scissor lift Certificate

c.) Basic First Aid Course Certificate

d.) WAH Supervisor Certificate

4.) Fluency in spoken & written English

5.) Good planning and time management skills

6.) Physically Fit

7.) Ability to work in Teams, and supervise junior technicians and assistants

8.) Good interpersonal skills

9.) Good customer service skill