Job Description & Requirements

· Responsible for planning and monitoring schedule for all projects

· Work closely with drafters and perform quality check of all drawings before production on site.

· Ensure the execution of works, products and services are in accordance with the customers’ requirements, drawings and specifications, etc and direct the carrying out of remedial measures to any non-conformances immediately upon discovery.

· Liaise with Project teams, authorities, client, architects and various contractors to ensure project work is carried out smoothly.

· Conduct periodic inspection of structural works.

Requirements:

· Degree in Civil/Structural Engineering recognized by P.E. Board

· Min. 3 years relevant experience in building and construction related field

· Able to work independently and in a team

The Safety Officer duties and responsibilities are as follows:

• Ensure all Statutory act & regulations, company safety rules & regulations and code of practice are implemented and complied by all staff.
• Review and recommend necessary changes regularly to the safety management system to keep it updated with the applicable local legislation.
• Conduct safety training related to the activity based on Safe Work Procedure / Risk Assessment.
• Manage Safety Audits on site.
• Review all risk assessments and risk management internally and externally.
• Conduct monthly WSH Committee Meeting and put up safety reports.
• Conduct monthly Mass Toolbox Meeting and participate in the Daily Toolbox Meeting.
• Enforce house rules on all stake holders and take action when necessary for noncompliance.
• Work closely with the project team to eliminate security, safety, health and environment hazards.
• Ensure legal compliance to all statutory safety and environmental regulations and timely submission of mandatory documents.
• Liaise with relevant authorities on matters pertaining to occupational safety and health.
• Advice Project Director/Manager in occupational safety and health.
• Inspection of site to ensure all facilities and equipment relevant to the maintenance of environmental health is in proper working condition.
• Manage incidents' investigations, recommend corrective actions and follow-up on the implementations and effectiveness of actions taken
• Review and maintain site's environmental, health and safety records
• Ensure PTW supporting documents are valid and in place for operational performance
• Other duties as assigned by the Departmental Manager.

Requirements:

• Registered WSHO and ECO
• Min 5 years of HDB/Commercial project experience required
• Minimum Diploma in Engineering, Occupational Safety, Occupational Health or other relevant discipline

The Snr Quantity Surveyor, oversee the works of a group of Quantity Surveyors, playing a critical role of managing all costs relating to building and civil engineering projects, from the initial calculations to the final figures, seeking to minimize the costs of a project and enhance value for money, while still achieving the required standards and quality. Many of these are specified by statutory building regulations, which the surveyor needs to understand and adhere to. Snr Quantity Surveyors keep track, throughout project progression, of variations to the contract that may affect costs and create reports to show profitability estimates and manages the cost relating to building project.

Job Description

• Prepare, maintain and manage tender documents of BOQ, tender clarifications and unit prices etc.
• Measure of quantities from drawings.
• Prepare tender documents to subcontractor / vendor for quotations.
• Manage tender administration and oversee project works.
• Evaluation of price comparison and costing summary.
• Other quantity surveying related duties as assigned.

Job Requirements:

• Candidate must possess at least a Diploma/Degree in Quantity Survey/Architecture/lnterior Design or equivalent.
• At least 2 year(s) of working experience in the related field is required for this position.

• Use of Building Information Modelling (BIM) to perform drawing work tasked
• Report to the manager/engineer in charge and perform work task assigned
• Monitor modeling/update drawing/ inform Project Manager if there is any changes
• Liaise with architect
• Input finishing with more details (if any)
• Monitor/checking if there is any crashing
• Coordinate and monitor shop drawing submission schedule.
• Produce shop drawings as per detail given by engineer/manager
• Able to produce revised shop drawing within one week upon receiving commented drawing.
• Familiar with program: Revit Archi and Revit MEP for drawing
• Familiar with program: Navis for checking the drawing

Job Description

· Liaise with sub-contractors, HDB, Town Council, consultant and residents.

· Customer Relationship Management: Interact with residents to maintain good relationship and receive feedback from them.

· Monitor, update and feedback to residents on the status of Defects Rectifications, Complaints & etc.

· Assist on phone calls and emails to answer resident’s inquiries. Make appointment for resident to attend inspection with BSC (Building Service Center) team.

· Daily/Weekly and Monthly Report: Processing of daily/weekly & monthly reports, preparing IDMS report to ensure day-to-day operations are running efficiently and effectively.

· IDMS system (Defects Management): Update defects cases for HDB's review and create new cases for new units and manage defects feedbacks from residents.

· IDMS system (E-Appointment): Manage appointments online.

· Notice - Write notice to inform residents of any construction activities.

· Work together with Site Supervisor to generate work schedule before commencement of public facilities rectification work, such as internal driveway drainage cover, water pipe, etc.

· Generate work schedule with Site Supervisors for sub-contractors to rectify defects as soon as possible.

· Brief residents to familiar with the areas or facilities around the buildings.

· Maintain & upkeep of Information Centre & BSC.

· Any ad-hoc duties.

Requirements

· Minimum 'O' Level and above

· Possess WSQ Certificate in Service Excellence (Level 1)

· Effective Customer Service Service Skills Course or equivalent

· Customer oriented with good communication and interpersonal skills

· Experience in customer relation works and fair construction knowledge would be an advantage

· At least 1 year of experience in a HDB BTO project

· Effectively bilingual

Job Description:

• Prepare designs, sketches and reports with supporting calculations for projects, and supply drafting staff with information to assist in the production of detailed drawings, the development of quantities, materials lists and cost estimates as required.
• Coordinate with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Prepare technical submissions for materials, construction methods and C&S shop drawings.
• Resolve any construction issues on drawings and liaise closely with relevant departments as well as the authorities, to ensure consistency with contractual technical specifications and statutory rules and regulations.
• Report on work progress during meetings.
• Attend site inspection with required.
• Any other tasks that assigned by reporting officer.

Job Requirement:

• Possess a Degree in Engineering (Civil)
• Experience in handling LTA Infrastructure design works
• At least 8 years design experience
• Good knowledge of the various engineering design software, for instance Autocad, BIM
• Candidate with strong relevant years of experience will be considered for senior positions

Job Description

• Reports Construction Manager
• To assist in site supervision works
• Coordinate internally with inter-department and externally with clients & consultants
• Coordinating for the project planning, documentation and execution of works on site
• Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required
• Coordinate for all submission
• Produce weekly site progress report and necessary submission
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.
• To take on PE Assignee Supervision Role

Job Requirement

• Degree in Civil Engineering or equivalent
• Independent with good communication skill
• Good organizational and planning skills
• Effective communication and coordination skills and team work
• Able to work independently and in a team
• Able to start immediately or within a short notice period will have added advantage
• RE Registration with IES of Singapore

Job Responsibilities:

• Identify project design hazards, construction risks, and constructability issues.
• Develop corresponding mitigation measures together with the project team.
• Chair regular risk mitigation meetings and training with clients and internal parties.
• Advise management on alternative safer and higher productivity construction methodologies.
• Review method statements and risk assessments for safety and construction compliance.
• Attend meetings related to construction progress, risks, etc.
• Any other duties as assigned by the Managements.

Job Requirements:

• Have reasonable exposure in safety and health for construction especially on transportation infrastructure projects in a similar nature
• Attended the Design for Safety (DfS) for Professional Course and passed the assessment or equivalent.
• A registered PE or Architect with a Practicing Certificate OR
• Minimum 10 years relevant experience in the design and the supervision of the construction of structures with at least 5 years in design which includes contributions to designs and writing specification
• Have a degree accepted by PE Board or Board of Architect and construction related degree accepted by Singapore Institute of Surveyors (SISV) and Society of Project Managers (SPM)
• Possess excellent leadership, planning, good management skills, interpersonal communication and negotiation skills
• Have experience in LTA projects have an advantage

Job Description:

• Manage and prepare the measurements and cost estimates for the construction projects from initial calculations to the final accounts.
• Prepare tender and contract documents, including bills of quantities.
• Evaluate tenders from contractors and subcontractors and, where appropriate, negotiate with the contractors.
• Prepare contract documents in accordance to the regulations.
• Prepare cost analysis and monitor project overruns to ensure the objectives of the project is achieved.
• Access payment and variation works to client and subcontractors to facilitate the smooth workflow process.
• Communicate with the client, management, sub-contractors and keeps track of the progression of both main contract and sub-contract.
• Monitor and keep track of project progress and are responsible for the measurement and valuation of variations in the work during the contract, for agreement of interim payments and the final account.
• Perform all duties in accordance with CCCC policies, processes, systems and procedures.
• Any other adhoc tasks assigned by superior.

Job Requirements:

• Bachelor's Degree in Quantity Survey or equivalent.
• More than 4 years of working experience in the related field is required for this position.
• Acquired with both civils and architectural knowledges is preferable.
• Good communication and negotiation skills.
• Experience in LTA project, or similar scale, complexity and nature of work will be advantages.
• 5.5days work week

Job Description:

• Experienced in structural engineering design works mainly for road/viaduct projects.
• Supervision of drafting for the preparation of project documentation.
• Prepare designs, sketches and reports with supporting calculations for projects, and supply drafting staff with information to assist in the production of detailed drawings, the development of quantities, materials lists and cost estimates as required.
• Assist in the preparation of technical detail for quotations, contract documentation and technical specifications.
• Prepare technical submissions for materials, construction methods and C&S shop drawings.
• Liaise with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Participate in the planning of projects as required.
• Previous experience in the use and application of Appropriate Singapore local and international Standards for structural design.
• Attend site inspection with required

Job Requirement

• Bachelor of Engineering (Civil) with minimum 5 years of structural engineering experience.
• Good knowledge of the various engineering design software, for instance Autocad, BIM
• Experienced in LTA projects would be advantage.
• Excellent written and verbal communication skills with an excellent eye for detail.
• Team Player.
• Meeting delivery deadlines and budgets.

Job Descriptions:

• Manage and prepare the measurements and cost estimates for the construction projects from initial calculations to the final accounts.
• Prepare contract documents in accordance to the regulations.
• Prepare cost analysis and monitor project overruns to ensure the objectives of the project is achieved.
• Access payment and variation works to subcontractors to facilitate the smooth workflow process.
• Communicate with the management, sub-contractors and keeps track of the progression of the sub-contract.
• Any other adhoc tasks assigned by superior.

Job Requirements:

• Bachelor's Degree in Quantity Survey or equivalent.
• Entry level or with 1-2 year(s) of working experience in the related field is required for this position.
• Good communication and negotiation skills.
• Experience in LTA project, or similar scale, complexity and nature of work will be advantages.
• Have done Additions and Alteration projects will be advantages.
• Location: West.

The job involve

1. Cleaning

2. Cleaning in ad hoc places either residential or commercial

3. Roster management

4. Client management

5. Training and orientation of the job to the new staffs

6. Martket the cleaning services

The work places are not fixed. The candidate must go all over singapore if demand needs.

Job Objective:

With reference to the Head of Export Control & Customs and in cooperation with your peers in our global export control team and the business functions you will be supporting the business to ensure compliant and timely delivery to our customers.

Job Description:

● Analyse, validate and complete compliance data and files in SAP systems and Compliance tools

● Analyse and validate Customer End Use Statements

● Analyse and approve Customers for Export Control and KYC compliance and RISK evaluation

● Compile Master Data

● Compile reports from Satair’s SAP system

● Maintain track records

● Upload records to SAP systems and Compliance tools

Other responsibilities can include working with the business to ensure high export control & customs standards and awareness training as well as the development of business processes. Your responsibility may include the analysis of orders and deliveries to proactively guide the business about best practice and optimization of order flows, and your role may also include audit support, reporting to HO function and customs compliance responsibilities.

Job requirements:

● Fluent in English, both verbal and written (mandatory)

● Knowledge of US and EU export control laws

● Knowledge of National export control and customs laws

● Experience in Compliance screening of customers

● Familiar with operations and customer support

● Familiar with Google Mail, Google Drive, Google Sheets and similar applications

● Analytical and detail oriented

● Well structured

ENVIRONMENTAL CONTROL OFFICER

(ECO)

Responsibilities:

• Ensure all construction works are complied to Environmental Pollution Control and Public Health Acts & Code of Practices
• Ensuring the project Environmental Management Control Plans and system are complied with
• Taking charge of all site Environment, Health and Hygiene matters
• All matters on site in relation to the duties & responsibilities of an ECO

Requirements:

• Certificate of Registration by NEA
• Candidate must possess at least a Professional Certificate / NITEC, Diploma or equivalent
• Relevant years of experience in construction field such as HDB, D&B projects etc

General Overview

The position is part of the Instrument Control and Electrical (ICE) team who is responsible for developing plans and schedules and providing advice to production and engineering team on all maintenance activities at the terminal.

Roles and ResponsibilIties

The incumbent shall be responsible for tasks and duties such as but not limited to the following:

• Daily planning and scheduling of maintenance tasks to carry out all required preventive, corrective and predictive maintenance of ICE asset in the Terminal
• Work closely with Mechanical, HSSE team to liaise with the Production and Jetty Operations team in the planning and analysis of each work request including coordinating the acquisition of electronic work permits.
• Carry out daily morning toolbox meeting for job assignments, briefings and any ICE-MECH work coordination communications
• Proficient in SAP to be able to carry out monitoring and scheduling of ICE PM & CM workorders, maintaining of ICE master equipment list, PM plans and raising purchase requisition for spare parts etc
• Liaise with External Authority for approval for Natural Gas Equipment maintenance request
• Close communication and co-ordination with external vendors and contractors to attend in house safety induction course, carry out site survey, site execution work etc
• Review Method of Statement and risk assessments are valid for the job
• Responsible for following up and verification that all jobs for close out are properly completed in SAP
• Raise Purchase requisitions in SAP and provide scope of supply and spare part specifications and work closely with Procurement Department for evaluation of vendor quotations for maintenance service contract/technical work outsourcing, monitoring of delivery of spare parts and materials etc
• Assist in the development of Maintenance budget, provide budget forecast, monitor and manage approved budget.
• Apply Jurong Island Pass sponsorship for external vendor.

Work Experience

• Minimum 5 (Degree) years and 8 (Diploma) years of experience in an oil and gas/petrochemical E&I maintenance supervisory or E&I maintenance planning and scheduling role
• Proficient in usage of Microsoft Office computer software and SAP systems
• Excellent organizational skills and adaptability to work in dynamic environment.

Education

• Engineering Degree/Diploma preferably in Electrical/Instrumentation/Chemical Engineering discipline.

Job Description

• Industry/ Organization Type: General Cleaning Services
• Position Title: Pest Control Technician
• Working Location: Islandwide
• Working Hours: Monday to Friday (9 am-6 pm), Saturday (9 am-1 pm)
• Salary Package: Basic $2,000 - $2,800 + Bonus + Allowance
• Duration: Permanent

Key Responsibilities

• Conduct inspections and identify infestation sources.
• Implement targeted treatment plans using safe and eco-friendly methods.
• Educate clients on pest prevention and maintenance strategies.
• Maintain accurate records of service visits and recommendations.
• Ensure compliance with safety regulations and company standards.

APPLY NOW!!!

• Ability to work independently and in a team
• Able to commit 5.5 days a week
• Must have a valid NEA Vector Control License
• Must have a valid Class 3 Driving License

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69357 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Analyse data on Workplace Safety and Health (WSH) performance, conditions, and practices.
• Carry our WSH compliance inspections.
• Clarify WSH programme requirements to employees of other departments.
• Coach team members on how to conduct routine checks on work activities.
• Conduct WSH incident and accident investigations.
• Conduct document reviews of Workplace Safety and Health
• Management System (WSHMS) reports.
• Coordinate Emergency Preparedness and Response Plan (EPRP) drills and the maintenance of emergency response equipment.
• Coordinate WSH programme initiatives.
• Develop and deliver safety briefings.
• Evaluate WSH non-compliance, unsafe work conditions and practices to identify WSH performance gaps.
• Evaluate impact of health hazards to employees’ safety and prioritise issues based on severity.
• Highlight barriers in complying with WSH policy and procedure.
• Identify areas for improvement in WSHMS.
• Implement Emergency Preparedness and Response Plan (EPRP) and communicate it to stakeholders.
• Implement Workplace Safety and Health Management (SWHMS) and Risk Management (RM) plans within scope of own work.
• Maintain WSHMS documentation.
• Monitor the implementation progress measures to address root cause of incident.
• Review investigation findings to identify causes of incidents and accidents.
• Support Workplace Safety and Health (WSH) policy and procedure implementation.
• Review investigation findings to identify causes of incidents and accidents.
• Support Workplace Safety and Health (WSH) policy and procedure implementation.

Requirements

• Candidate must possess at least Diploma specialized in Environmental/Health/Safety or equivalent.
• At least 5 years of relevant experience in the related field is required for this position.
• Must be registered ECO
• Well-Versed In WSH Act and requirements.
• Possess good working attitude.
• Strong interpersonal and communication skills
• Ability to multitask and work under pressure to meet tight deadline.

As a member of the Control and Instrumentation team, you will be responsible for executing maintenance work on instrumentation and control systems in the power plant effectively, efficiently, and to comply with safety and regulatory requirements.

Responsibilities:

• Carry out repair and rectification of equipment failure and malfunction. Test and recommissioning of rectified system or equipment
• Carry out the overhaul, inspection, calibration, servicing program during plant scheduled outage.
• Implement modification, upgrading, and installation plans for plant system and equipment for enhancement, availability, and reliability improvement.
• Maintains detailed work reports, spreadsheets, graphs, plots on computer-based software (Maximo, MS Word, and MS Excel)
• Assist Engineers and Technical Officers in the maintenance work
• Supervise contractors under his charge

Requirements:

• Nitec in Electronics Engineering or equivalent
• Possesses knowledge of Instrumentation
• Preferably possesses 2 years of experience in Power Plant or Oil and Gas industry
• Self-driven, with a good working attitude and a good team player
• Is available on standby after office hours for emergency calls
• Have a safety mindset and display good workplace safety behavior.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

• Oversee the entire ICA design process, from concept to implementation, ensuring project is delivered on
• time, within specifications and meeting industrial standards.
• Lead and mentor a team of ICA engineers and ensuring the quality in design work.
• Oversee the development of control logic, CMS programming, HMI interfaces, and Sub-Control systems, ensuring seamless communication and synchronisation of control components.
• Oversee the selection of instrumentation, sensors, and transmitters for accurate data acquisition, measurement, and feedback control.
• Oversee the configuration and deployment of the Control Monitoring System for seamless process control and integration of subsystems.
• Ensure ICA designs adhere to relevant safety standards (such as SIL, IEC 61511) and cybersecurity protocols to mitigate operational risks.
• Collaborate with process team to optimise the processes through intelligent control strategies, adaptive algorithms, and data-driven insights.
• Coordinate validation activities, including factory acceptance testing (FAT) and site acceptance testing (SAT), to ensure systems meet performance criteria.
• Develop RFQ and collaborate with suppliers and vendors to source components, equipment, and systems required for ICA and ensuring they meet quality and performance standards.
• Oversee testing and commissioning of the CMS, coordinating with process team to ensure system operate as intended.
• Ensure clear and consistent communication with project client and consultant throughout the project, providing updates, addressing concerns and managing expectations.
• Manage ICA design budgets, including cost estimation, resource allocation, and cost control.

Job Description

• Industry/ Organization Type: Manufacturer (Commercial Cleaning Equipment)
• Position Title: Inventory Control Assistant/Inventory Control Executive
• Working Location: Gul Crescent (Transport provided at Boon Lay, Lakeside, Chinese Garden, Yew Tee)
• Working Hours: 5 days (Monday-Friday, 8:15 AM-5:30 PM)
• Salary Package: Up to $3000 + AWS + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Efficient management of the company’s inventory system.
• Support and participate in regular stock checks and audits.
• Monitor and maintain accurate inventory records in the system.
• Handle inventory documentation, review records, and reconcile any discrepancies.
• Collaborate with warehouse staff on inventory-related issues.
• Regularly update supplier price lists and assist in setting selling prices.
• Other ad-hoc duties that may be assigned.

APPLY NOW!!!

• Minimum Diploma (Diploma or equivalent, preferably in logistics or a related field).
• Has relevant experience in inventory control.
• Proficient in Microsoft Excel.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69584 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

As a member of the Control & Instrumentation team, you will be responsible for the effective maintenance of control systems and instrumentation in the power plant to achieve high reliability and availability in accordance with statutory, regulatory, and safety requirements.

Responsibilities:

• Ensure maintenance work is executed effectively, efficiently and complied with safety and regulatory requirement.
• Respond and attend to plant failures and forced outages to ensure timely and proper rectification and restoration.
• Plan and ensure safe and timely execution of plant overhaul activities.
• Recommend and implement modification, upgrading and installation plans for plant system and equipment for enhancement, availability and reliability improvement.
• Manage the procurement of parts and services to meet the maintenance needs of the section, including spare parts and external services for routine and breakdown maintenance.
• Lead and manage a team of technical officers and technicians.
• Development of staff.

Requirements:

• Degree in Electronic & Electrical Engineering or equivalent recognised by the Professional Engineers Board.
• Possesses sound knowledge of Control and Instrumentation and good working knowledge of safety and statutory requirements.
• Driven self-starter with strong work ethics.
• Team player with strong analytical, technology and communication skills.
• Is available on standby after office hours for emergency calls.
• Knowledge in cyber security will be advantageous.
• Have a safety mindset and display good workplace safety behaviour.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

Job Descriptions:

• Perform safety & functionality checks on tools & equipment.
• Carry out maintenance of tools and equipment.
• Responsible for carrying out daily pest control activities according to operational schedule.
• Provides excellent customer service and timely pest control services at customers’ premises.
• Provides oral and written feedback on work activities.
• Performs any other related duties as instructed

Requirements:

• Able to commit to 6 Working Days.
• Service Oriented, Responsible, Team Player

Responsibilities

• Organise and conduct regular credit and accounts receivable review meetings with business units and sales departments to resolve delinquent accounts.
• Follow up and communicate with customers regarding outstanding payments.
• Review and process new customer account applications.
• Maintain and update customer account details and credit limits in SAP.
• Monitor daily sales transactions for credit holds in SAP and communicate with the sales department to address overdue issues.
• Disseminate invoices, statements of accounts, reminder, and confirmation letters.
• Perform customer account reconciliations and confirmations.
• Prepare regular collections and accounts receivable status reports for management.
• Liaise with insurers to apply for trade credit insurance for customer accounts with credit terms.
• Liaise with banks regarding bank guarantees, including letters of credit.
• Verify supporting documents to carry out billings to customers.
• Perform other ad hoc duties as assigned

Requirements:

• Minimum of 1 year of relevant experience
• Proficiency in SAP software is an advantage
• Good time management skills, ability to meet deadlines, and strong attention to detail
• Good team player with the ability to work independently

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: QX3XY593

As a member of the Control and Instrumentation team, you will be responsible for executing maintenance work on instrumentation and control systems in the power plant effectively, efficiently, and to comply with safety and regulatory requirements.

Responsibilities:

• Carry out repair and rectification of equipment failure and malfunction. Test and recommissioning of rectified system or equipment
• Carry out the overhaul, inspection, calibration, servicing program during plant scheduled outage.
• Implement modification, upgrading, and installation plans for plant system and equipment for enhancement, availability, and reliability improvement.
• Maintains detailed work reports, spreadsheets, graphs, plots on computer-based software (Maximo, MS Word, and MS Excel)
• Assist Engineers and Technical Officers in the maintenance work
• Supervise contractors under his charge

Requirements:

• Diploma in Electronics Engineering or equivalent
• Possesses knowledge of Instrumentation
• Preferably possesses 2 years of experience in Power Plant or Oil and Gas industry
• Self-driven, with a good working attitude and a good team player
• Is available on standby after office hours for emergency calls
• Have a safety mindset and display good workplace safety behavior.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.