Job Description & Requirements

· Responsible for planning and monitoring schedule for all projects

· Work closely with drafters and perform quality check of all drawings before production on site.

· Ensure the execution of works, products and services are in accordance with the customers’ requirements, drawings and specifications, etc and direct the carrying out of remedial measures to any non-conformances immediately upon discovery.

· Liaise with Project teams, authorities, client, architects and various contractors to ensure project work is carried out smoothly.

· Conduct periodic inspection of structural works.

Requirements:

· Degree in Civil/Structural Engineering recognized by P.E. Board

· Min. 3 years relevant experience in building and construction related field

· Able to work independently and in a team

The Safety Officer duties and responsibilities are as follows:

• Ensure all Statutory act & regulations, company safety rules & regulations and code of practice are implemented and complied by all staff.
• Review and recommend necessary changes regularly to the safety management system to keep it updated with the applicable local legislation.
• Conduct safety training related to the activity based on Safe Work Procedure / Risk Assessment.
• Manage Safety Audits on site.
• Review all risk assessments and risk management internally and externally.
• Conduct monthly WSH Committee Meeting and put up safety reports.
• Conduct monthly Mass Toolbox Meeting and participate in the Daily Toolbox Meeting.
• Enforce house rules on all stake holders and take action when necessary for noncompliance.
• Work closely with the project team to eliminate security, safety, health and environment hazards.
• Ensure legal compliance to all statutory safety and environmental regulations and timely submission of mandatory documents.
• Liaise with relevant authorities on matters pertaining to occupational safety and health.
• Advice Project Director/Manager in occupational safety and health.
• Inspection of site to ensure all facilities and equipment relevant to the maintenance of environmental health is in proper working condition.
• Manage incidents' investigations, recommend corrective actions and follow-up on the implementations and effectiveness of actions taken
• Review and maintain site's environmental, health and safety records
• Ensure PTW supporting documents are valid and in place for operational performance
• Other duties as assigned by the Departmental Manager.

Requirements:

• Registered WSHO and ECO
• Min 5 years of HDB/Commercial project experience required
• Minimum Diploma in Engineering, Occupational Safety, Occupational Health or other relevant discipline

The Snr Quantity Surveyor, oversee the works of a group of Quantity Surveyors, playing a critical role of managing all costs relating to building and civil engineering projects, from the initial calculations to the final figures, seeking to minimize the costs of a project and enhance value for money, while still achieving the required standards and quality. Many of these are specified by statutory building regulations, which the surveyor needs to understand and adhere to. Snr Quantity Surveyors keep track, throughout project progression, of variations to the contract that may affect costs and create reports to show profitability estimates and manages the cost relating to building project.

Job Description

• Prepare, maintain and manage tender documents of BOQ, tender clarifications and unit prices etc.
• Measure of quantities from drawings.
• Prepare tender documents to subcontractor / vendor for quotations.
• Manage tender administration and oversee project works.
• Evaluation of price comparison and costing summary.
• Other quantity surveying related duties as assigned.

Job Requirements:

• Candidate must possess at least a Diploma/Degree in Quantity Survey/Architecture/lnterior Design or equivalent.
• At least 2 year(s) of working experience in the related field is required for this position.

• Use of Building Information Modelling (BIM) to perform drawing work tasked
• Report to the manager/engineer in charge and perform work task assigned
• Monitor modeling/update drawing/ inform Project Manager if there is any changes
• Liaise with architect
• Input finishing with more details (if any)
• Monitor/checking if there is any crashing
• Coordinate and monitor shop drawing submission schedule.
• Produce shop drawings as per detail given by engineer/manager
• Able to produce revised shop drawing within one week upon receiving commented drawing.
• Familiar with program: Revit Archi and Revit MEP for drawing
• Familiar with program: Navis for checking the drawing

Job Description

· Liaise with sub-contractors, HDB, Town Council, consultant and residents.

· Customer Relationship Management: Interact with residents to maintain good relationship and receive feedback from them.

· Monitor, update and feedback to residents on the status of Defects Rectifications, Complaints & etc.

· Assist on phone calls and emails to answer resident’s inquiries. Make appointment for resident to attend inspection with BSC (Building Service Center) team.

· Daily/Weekly and Monthly Report: Processing of daily/weekly & monthly reports, preparing IDMS report to ensure day-to-day operations are running efficiently and effectively.

· IDMS system (Defects Management): Update defects cases for HDB's review and create new cases for new units and manage defects feedbacks from residents.

· IDMS system (E-Appointment): Manage appointments online.

· Notice - Write notice to inform residents of any construction activities.

· Work together with Site Supervisor to generate work schedule before commencement of public facilities rectification work, such as internal driveway drainage cover, water pipe, etc.

· Generate work schedule with Site Supervisors for sub-contractors to rectify defects as soon as possible.

· Brief residents to familiar with the areas or facilities around the buildings.

· Maintain & upkeep of Information Centre & BSC.

· Any ad-hoc duties.

Requirements

· Minimum 'O' Level and above

· Possess WSQ Certificate in Service Excellence (Level 1)

· Effective Customer Service Service Skills Course or equivalent

· Customer oriented with good communication and interpersonal skills

· Experience in customer relation works and fair construction knowledge would be an advantage

· At least 1 year of experience in a HDB BTO project

· Effectively bilingual

Job Description:

• Prepare designs, sketches and reports with supporting calculations for projects, and supply drafting staff with information to assist in the production of detailed drawings, the development of quantities, materials lists and cost estimates as required.
• Coordinate with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Prepare technical submissions for materials, construction methods and C&S shop drawings.
• Resolve any construction issues on drawings and liaise closely with relevant departments as well as the authorities, to ensure consistency with contractual technical specifications and statutory rules and regulations.
• Report on work progress during meetings.
• Attend site inspection with required.
• Any other tasks that assigned by reporting officer.

Job Requirement:

• Possess a Degree in Engineering (Civil)
• Experience in handling LTA Infrastructure design works
• At least 8 years design experience
• Good knowledge of the various engineering design software, for instance Autocad, BIM
• Candidate with strong relevant years of experience will be considered for senior positions

Job Description

• Reports Construction Manager
• To assist in site supervision works
• Coordinate internally with inter-department and externally with clients & consultants
• Coordinating for the project planning, documentation and execution of works on site
• Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required
• Coordinate for all submission
• Produce weekly site progress report and necessary submission
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.
• To take on PE Assignee Supervision Role

Job Requirement

• Degree in Civil Engineering or equivalent
• Independent with good communication skill
• Good organizational and planning skills
• Effective communication and coordination skills and team work
• Able to work independently and in a team
• Able to start immediately or within a short notice period will have added advantage
• RE Registration with IES of Singapore

Job Responsibilities:

• Identify project design hazards, construction risks, and constructability issues.
• Develop corresponding mitigation measures together with the project team.
• Chair regular risk mitigation meetings and training with clients and internal parties.
• Advise management on alternative safer and higher productivity construction methodologies.
• Review method statements and risk assessments for safety and construction compliance.
• Attend meetings related to construction progress, risks, etc.
• Any other duties as assigned by the Managements.

Job Requirements:

• Have reasonable exposure in safety and health for construction especially on transportation infrastructure projects in a similar nature
• Attended the Design for Safety (DfS) for Professional Course and passed the assessment or equivalent.
• A registered PE or Architect with a Practicing Certificate OR
• Minimum 10 years relevant experience in the design and the supervision of the construction of structures with at least 5 years in design which includes contributions to designs and writing specification
• Have a degree accepted by PE Board or Board of Architect and construction related degree accepted by Singapore Institute of Surveyors (SISV) and Society of Project Managers (SPM)
• Possess excellent leadership, planning, good management skills, interpersonal communication and negotiation skills
• Have experience in LTA projects have an advantage

Job Description:

• Manage and prepare the measurements and cost estimates for the construction projects from initial calculations to the final accounts.
• Prepare tender and contract documents, including bills of quantities.
• Evaluate tenders from contractors and subcontractors and, where appropriate, negotiate with the contractors.
• Prepare contract documents in accordance to the regulations.
• Prepare cost analysis and monitor project overruns to ensure the objectives of the project is achieved.
• Access payment and variation works to client and subcontractors to facilitate the smooth workflow process.
• Communicate with the client, management, sub-contractors and keeps track of the progression of both main contract and sub-contract.
• Monitor and keep track of project progress and are responsible for the measurement and valuation of variations in the work during the contract, for agreement of interim payments and the final account.
• Perform all duties in accordance with CCCC policies, processes, systems and procedures.
• Any other adhoc tasks assigned by superior.

Job Requirements:

• Bachelor's Degree in Quantity Survey or equivalent.
• More than 4 years of working experience in the related field is required for this position.
• Acquired with both civils and architectural knowledges is preferable.
• Good communication and negotiation skills.
• Experience in LTA project, or similar scale, complexity and nature of work will be advantages.
• 5.5days work week

Job Description:

• Experienced in structural engineering design works mainly for road/viaduct projects.
• Supervision of drafting for the preparation of project documentation.
• Prepare designs, sketches and reports with supporting calculations for projects, and supply drafting staff with information to assist in the production of detailed drawings, the development of quantities, materials lists and cost estimates as required.
• Assist in the preparation of technical detail for quotations, contract documentation and technical specifications.
• Prepare technical submissions for materials, construction methods and C&S shop drawings.
• Liaise with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Participate in the planning of projects as required.
• Previous experience in the use and application of Appropriate Singapore local and international Standards for structural design.
• Attend site inspection with required

Job Requirement

• Bachelor of Engineering (Civil) with minimum 5 years of structural engineering experience.
• Good knowledge of the various engineering design software, for instance Autocad, BIM
• Experienced in LTA projects would be advantage.
• Excellent written and verbal communication skills with an excellent eye for detail.
• Team Player.
• Meeting delivery deadlines and budgets.

Job Descriptions:

• Manage and prepare the measurements and cost estimates for the construction projects from initial calculations to the final accounts.
• Prepare contract documents in accordance to the regulations.
• Prepare cost analysis and monitor project overruns to ensure the objectives of the project is achieved.
• Access payment and variation works to subcontractors to facilitate the smooth workflow process.
• Communicate with the management, sub-contractors and keeps track of the progression of the sub-contract.
• Any other adhoc tasks assigned by superior.

Job Requirements:

• Bachelor's Degree in Quantity Survey or equivalent.
• Entry level or with 1-2 year(s) of working experience in the related field is required for this position.
• Good communication and negotiation skills.
• Experience in LTA project, or similar scale, complexity and nature of work will be advantages.
• Have done Additions and Alteration projects will be advantages.
• Location: West.

The job involve

1. Cleaning

2. Cleaning in ad hoc places either residential or commercial

3. Roster management

4. Client management

5. Training and orientation of the job to the new staffs

6. Martket the cleaning services

The work places are not fixed. The candidate must go all over singapore if demand needs.

Requirements & Responsibilities:

1. To assist the Project Manager in implementing the safety management system to ensure staff and workers work in a safe and healthy environment.

2. To assist the Project Manager in implementing the permit to work system and to stop & report to the project manager any incompatible works relating to the same.

3. To act as the secretary of the Project WSH Committee and chair the meeting such that the Nakano staff and subcontractors are aware of the site activities and the required actions.

4. To assist the Project Manager in complying with the WSH Acts and Regulation.

5. To conduct periodic safety inspection to verify level of safety compliance so that the safety standards are constantly improved.

6. To ensure site compliance with statutory safety requirements and in-house safety rules and regulations and to report any deviations to the Project Manager for management consideration.

7. To recommend to the Project Manager any necessary corrective measures to be taken on safety non-compliance and deviations in order to enhance the site safety.

8. To update site management on any new or changes to current statutory safety requirements and also take the necessary actions.

9. To investigate any accident/ dangerous occurrence/ incident and recommend corrective measures to prevent recurrence.

10. To liaise with officers from MOM/NEA /PUB on matters pertaining to safety, mosquito breeding, ECM etc and take the necessary action for their comments.

11. To conduct safety training and organise safety promotional activities.

12. To ensure safety documentation is kept current and ready for MOM, NEA or ISO Audit.

13. Carry out the works assigned for compliance with requirements of ISO 9000, ISO 14001 and OHSAS 18001

14. Be involved in the evaluation of risk assessment and plan, manage and review Management Programmes.

15. Be involved in all the sub-con safety and health matters pertaining to the site.

16. Prepare and submit the site environment control Programme and ensure that the staff and workers are aware and understand the intention.

17. Inspect the site to ensure that all facilities and equipment relevant to the maintenance of the environment health are in working condition.

18. Assist the authority to investigate outbreaks of infectious, vector-borne disease.

19. Organise campaigns, training course to develop and sustain the interest of workers in maintaining good environment health standards.

20. To assist the Project Manager in the management of the workers e.g their courses, reporting sick, home leave, accommodation.

21. To assist in achieving the safety standards required by the site’s developer.

22. Be involved in safety aspects for planning of activities that are in view of the public or in area that the public uses.

23. Must hold a valid registration with MOM as a WSH Officer and with NEA as an ECO

Job Description

• Lead and manage the instrumentation, control and automation engineering and design works.
• Ensure instruments, electrical and control designs compliance with customer specifications.
• Lead the team to provide technical supports to all instrumentation, control and automation works.
• Collaborate nternal stakeholders, clients, consultants, vendors and contractors.
• Handle equipment package and procurement including technical specifications preparation, technical clarification, technical bid analysis, etc.
• Work with cross function project team to support project activities, i.e. schedule, process, progress claims, etc.
• Coordinate, provide direction and support to the project team.
• Manage and supervise the site installation, inspection, testing and commissioning, plant proving related to Instrumentation, Control and automation system and interface works with other disciplines and other stakeholders.
• Attend to clients’ comments and ensure clients’ approval & acceptance to all ICA related design, installation and Testing & Commissioning Works.

Requirements

• Degree in Electrical & Electronic Engineering / Instrumentation & Control Engineering / Advanced Diploma in Process Control and Instrumentation.
• At least 15 years of relevant experience
• Experience in Selection, installation and Commissioning of Instrumentation.
• Experience in system design, network design, installation and commissioning of the control and monitoring systems.
• Experience in Basic Programming of PLC/DCS and SCADA.
• Experience in Project Execution, Supervising and Coordination with sub-contractors, consultant and Client.
• Good technical knowledge in understanding instrumentation, control and automation system.
• Knowledge in electrical system and mechanical process system will be an advantage.
• Good technical understanding of water, wastewater and pollution control system.
• Relevant experience in design and site work for water and wastewater treatment works.
• Meticulous and analytical with excellent problem solving skills.
• Able to work under tight deadlines.
• Highly motivated and ability to work independently with minimal supervision.

• Maintains project administration in a correct and timely manner.
• Orders materials and equipment and takes care of the necessary permits.
• Accomplishes construction human resource objectives by selecting, orienting, and training employees.
• Assesses safety and finance goals.
• Manages sub-contractors by locating, evaluating, and selecting contractors.
• Meets operational standards by contributing construction information to strategic plans and reviews.
• Meets construction budget by monitoring project expenditures.
• Accomplishes construction project results by defining project purpose and scope.
• Approves construction projects by conducting inspections at critical phases.
• Prevents fines and work interruptions by complying with, and enforcing, codes.
• Maintains a safe, secure, and healthy work environment by following guidelines, standards, and procedures.
• Ability to read construction blueprints and store elevation drawings
• Proficiency in demonstrating proposals and projects
• Excellent communication skills, both verbal and written
• Highly organized with strong attention to detail
• Ability to manage multiple projects with urgent deadlines
• Great time management and problem-solving skills

• Maintains project administration in a correct and timely manner.
• Orders materials and equipment and takes care of the necessary permits.
• Accomplishes construction human resource objectives by selecting, orienting, and training employees.
• Assesses safety and finance goals.
• Manages sub-contractors by locating, evaluating, and selecting contractors.
• Meets operational standards by contributing construction information to strategic plans and reviews.
• Meets construction budget by monitoring project expenditures.
• Accomplishes construction project results by defining project purpose and scope.
• Approves construction projects by conducting inspections at critical phases.
• Prevents fines and work interruptions by complying with, and enforcing, codes.
• Maintains a safe, secure, and healthy work environment by following guidelines, standards, and procedures.
• Ability to read construction blueprints and store elevation drawings
• Proficiency in demonstrating proposals and projects
• Excellent communication skills, both verbal and written
• Highly organized with strong attention to detail
• Ability to manage multiple projects with urgent deadlines
• Great time management and problem-solving skills

Job Responsibilities:

• To fetch construction workers to and from jobsite to Dormitory.
• Airport workers pick-up & send off.
• Send workers for MOM appointments, and bring workers to clinics or medical centers
• Dispatch of documents between HQ and sites.
• Perform other ad-hoc duties when assigned.

Job Requirements:

• Possess a valid Class 3 / 4 driving license with good driving record.
• Must have relevant 3 years working experience.
• Familiar with Singapore roads and landmarks.
• Good interpersonal skills and attitude, reliable and responsible.

• Location: Boon Keng/Bendemeer

• Working hours: 08:00 to 17:00 (Monday to Friday)

• Salary: up to $15,000 (depending on experience)

Senior Manager (General Affairs, Construction Industry, Japanese speaking)

Our client, one of the largest construction companies in Japan, has been looking for a Senior Manager who can assist the Singapore Branch in all the corporate functions.

Job Description:

General affairs

• Launch new businesses not only Singapore but also other sites
• Manage and supervise local staff
• Establish construction site offices and dormitories for staff
• Support establishing relationship with neighborhood countries
• Attend and ceremonies and respond to public relations
• Other ad-hoc duties if needed

Marketing

• Conduct market researches for potential countries and projects

Bidding

• Responsible for bidding activities for future projects

Accounting

• Handle budget creation and performance management for site management expenses
• Support accounting settlements
• Confirm construction contract details
• Manage payment of construction costs and other expenses settlement jobs

Job Requirements:

• At least 3-5 years of managing staff
• Experience in the same industry is a great advantage
• Willing to independently handle a wide range of tasks such as general affairs, human resources and labor affairs, accounting, legal affairs, etc. and business travels
• Business level of Japanese language ability to communicate with their HQ in Japan

Interested applicants, please send your resume to Charlene (R22105303) at [email protected] with the email subject header "Senior Manager (General Affairs and finance, Construction Industry, Japanese speaking)".

We regret that only shortlisted candidates will be notified. Other applications will be updated in our database for future job opportunities.

By submitting any resumes or applications to Pasona Singapore Pte Ltd, you are considered to have read and agreed to the terms of our Privacy Policy and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Please find our Privacy Policy Agreement in the below link.

http://www.pasona.com.sg/privacy.html

Thank you for your kind understanding and co-operation.

Pasona Singapore Pte Ltd

EA License No:90C4069

(Lau Rui Lin, Charlene, EA Registration No: R22105303)

Our client is in construction industry (Grade A1 Contractor), and they are currently seeking for Admin Assistant to be part of the team.

JOB DIMENSION (SCOPE)

• Provides administrative support to ensure efficient operation of office.
• Carries out administrative duties such as data entry, documentation, filing, typing, copying, binding, scanning etc.
• Compile and prepare reports on monthly basis
• Ensures operation of equipment by completing preventive maintenance requirements, calling for repairs, maintaining equipment inventories.
• Maintains supplies inventory by checking stock to determine inventory level, anticipating needed supplies, placing and expediting orders for supplies.
• Validation of invoices prior to payments.
• Attached to and assisting Document Controllers for daily administrative tasks and duties
• Any other ad-hoc duties as assigned

REQUIREMENT

• Professional Certificate / Diploma in any field or equivalent
• Proficient in MS Office especially MS Excel, Word
• Open and able to work at construction project site office

Position: Admin Assistant (Construction)

Salary: $2,400 - $3,000

Working Day: 5.5 Day (Mon-Fri 9am-6pm ; Sat 9am-1pm)

Working location: Tuas South Avenue 637014 (Transport Provide from Tuas Link MRT)

Responsibility:

• Answer and direct phone calls
• Organize and schedule appointments
• Plan meetings and take detailed minutes
• Write and distribute email, correspondence memos, letters, faxes and forms
• Assist in the preparation of regularly scheduled reports
• Develop and maintain a filing system
• Update and mainta
• in office policies and procedures
• Order office supplie
• Maintain contact lists
• Book travel arrangements
• Submit and reconcile expense reports
• Provide general support to visitors
• Act as the point of contact for internal and external clients
• Liaise with executive and senior administrative assistants to handle requests and queries from senior managers

Requirement:

• Relevant working experience in Construction Industry

Email: [email protected]

Tan Yong Zhi (Jackson) | Reg: R24124461

The Supreme HR Advisory Pte. Ltd | EA No: 14C7279

About the Job

The Quality Department plays a very important role in Cyrus in maintaining the quality management system and driving quality improvements to deliver high quality products for our customers. You will be working closely with the Assistant Quality Manager on Quality Management System (QMS) and suppliers’ management.

Your key responsibilities are as follows:

- Maintain updated and accurate documents and records on ISO 9001, 14001 and 13485 system (includes Quality Manual, Procedures, Work Instructions, Forms, etc.) to ensure system compliance and ready for Management Review.

- Plan and conduct internal and external audits to ensure readiness of all sections for third party certification body, management review and customer audits.

- Coordinate with internal stakeholders to participate in customer or supplier audits for compliance

- Review audit findings and develop action plans to drive continuous improvements.

- Generate and review quality reports on suppliers’ performance and work with suppliers to address non-conforming materials, and drive for continuous improvement.

- Issue and follow up on Supplier Corrective Action Request (SCAR) to suppliers, monitor and review SCAR effectiveness for timely closure.

- Support the qualification of new suppliers to maintain a healthy pipeline of qualified suppliers to meet Cyrus production requirements.

- Maintain and conduct regular review of calibration and preventive maintenance for equipment.

- Responsible for quality issues arising from production and customer feedback, and collaborate with the production team to address internal process issues and implement corrective actions to resolve customer complaints with proper documentation.

- Responsible for timely closure of Corrective and Preventive Actions (CAPA), non-conformance investigation report and customer complaints and, publish reports on quality performance.

- Lead the Material Review Board (MRB) meeting involving members from production, engineering and quality departments to conduct root cause analysis, address quality issues, implement corrective actions and review its effectiveness.

- Lead the team of QC inspectors in the inspection of parts for conformity in accordance with relevant drawing requirements.

Your areas of knowledge and expertise that matter most for this role:

· Diploma in quality management / Engineering / Manufacturing or related field

· Minimum 3 to 5 years of relevant working experience in handling audits and ISO documentation in manufacturing industries.

· Knowledge in Supplier Management

· Knowledge of quality Management Standards such as ISO 9001, 14001, 13485 and ISO 22301.

· Knowledge in Potential Failure Mode Effect Analysis (PFMEA), Control Plans .and Gage Repeatability & Reproducibility (GR&R)

· Familiar with 8D and 5W problem solving methodology.

· Good communication and presentation skills

· Organized and detail oriented.

· Positive attitude with ability to multi task.

· Independent, takes initiatives and able to work with minimum supervision.

· Good team player with good initiatives and ability to work independently.

Job Objectives

To ensure complete accuracy of all incoming products upon receipt and outgoing to customer for both Red & Blue Channel in accordance with Satair’s Company Management System. Such accuracy, in alignment with Satair’s quality objectives, shall pertain to documentation, part numbers, specification, description, quantity and quality of products.

• Perform incoming inspection to ensure that aviation products, parts and appliances received meet the applicable requirements.
• Perform outgoing inspection to ensure that the design status is still current prior to issue of an EASA Form 1 to declare the airworthiness of new aviation products, parts and appliances.

Job Responsibilities

• Ensure correct shipment from forwarder prior acceptance.
• Unpack the delivered items for inbound inspection
• Perform incoming and outgoing inspection to ensure that aviation products, parts and appliances meet the applicable design specification
• Ensure all certificates and deliveries documentation are in order
• Ensure proper record of technical inspections performed in the production orders and the relevant IT system (SAP)
• Issue certificates of conformity and/or EASA Form 1, where applicable
• Document shipment discrepancy in the applicable Claim Database and follow up with relevant stakeholders to resolve the discrepancy.
• Ensure non-conforming material are managed according to company procedures.
• Perform periodic inspection managed according to company procedures.
• Manage a shelf life monitoring program according to company procedures.
• Perform inspection on customer return goods according to company procedures
• Perform goods return to supplier according to company procedures
• Perform scrapping of parts according to company procedures
• Provide support on the management of the supplier discrepancy and customer claim handling and investigation
• Report any Suspected Unapproved Parts to the Manager
• Handle quality escape notifications and perform required actions
• Maintain tidy conditions in own working area and any other areas for which the individual is responsible
• Able to work 24 hours shift work
• Any other tasks any assigned by the Manager

Secondary Responsibilities

• Assist the Manager to implement and manage an independent quality and safety system with its administration to ensure that the activities carried out can be monitored for compliance with the relevant CAAs, ISO9001, AS9110 & AS9120 requirements and relevant procedures and instructions that are called out by company procedures
• Work in backup capacity within the team by arrangement with the Manager – Quality
• Provide support and guidance to the Warehouse and Shipping team on the incoming and outgoing quality related process
• Perform pick, pack and process shipment orders through the point of picking to dispatch with appropriate paperwork, when necessary.
• Report any deterioration in Quality performance and recommend mitigation actions
• Promote quality awareness throughout the organization
• Assist the Manager to manage a system to monitor, investigate and evaluate customer's complaints and warranties issues in the operations
• Assist in the development of new processes together with the appropriate departments

Job Requirements

• Minimum Singapore-Cambridge General Certificate of Education N level or equivalent with technical training preferred, preferably with a minimum Diploma in Aeronautical, Mechanical or Electrical Engineering
• A minimum of 12 months of experience in an Airbus Production environment or an equivalent level from a different production/repair organization confirmed by POA Compliance Team is required
• Technically knowledgeable and capable of grasping detailed engineering and quality concepts
• Ability to understand and read blueprints, schematics & Component Maintenance Manuals
• Be able to communicate in English, both verbally and in writing and ability to read and understand the applicable procedural documentation and regulation
• Good team player with excellent interpersonal and communication skills, able to multi-task effectively
• Strong analytical/Critical thinking/Problem-solving skills
• Ability to work under pressure and a high level of integrity and passionate in problem solving and drive for results
• Effective time management
• Must exhibit a high level of motivation, sense of urgency, attention to detail, energetic approach to job duties and requirements
• Inter-cultural understanding
• Honest, dependable, loyal and self-reliance
• Good written, verbal communication and presentation skill
• Attitude supportive of Satair values
• Preferably with minimun 18 months of aviation experience with at least 6 months in quality assurance function
• Knowledge of airworthiness authorities’ regulatory requirements and AS9100 series standard requirements is an added advantage
• Ability to analyze inspection findings, and determine best case analysis advantage
• PC literacy, including google word, spreadsheets & slides
• Knowledge of SAP

Salary: 4,200 to $4,400/-

Working Hours: 8am to 8pm

Monday to Satursday

Able to handle portable hand tools and equipment

Able to operate Forklift & Lifting Machine

Co-ordinating work with Team Leader

Able to do Site-measuremnet and Calculating of floor plan

Able to speak Chinese with Chinese Speaking Client's

Able to handle and operate PC, data entry to system

Non Air con working enviroment

Job Description

As a Central Quality data analytic engineer, your main responsibility will be as follows:

• working with enormous data and conduct analytics on sophisticated datasets to assist AT to better understand operation. These involve providing solution(s) to pressing manufacturing process issues to drive yield and quality improvement programs particularly on test triggers governance.
• You will identify, collect and engineered both structured and unstructured datasets from separate sources to make available in Big Data platform for user query and analysis. In the process, you may build visualization for business insights and needs.
• You may also build and implement frontier's predictive analytics model, strategy and operation to identify untapped opportunities and expose hidden risk buried inside vast amount of data.
• Develops, evaluates, revises, and applies technical quality assurance protocols/methods to inspect and test in-process raw materials, production equipment, and finished products.
• Ensures activities and items are in compliance with both company quality assurance standards and applicable government regulations.
• Performs analysis and identifies trends in the inspection of finished products, in-process materials and bulk raw materials, and recommends corrective actions.
• Ensures that established manufacturing inspection, sampling and statistical process control procedures are followed.
• May assure compliance to in-house and/or external specifications and standards, such as GMPs and ISO regulations.
• Evaluates and analyzes the efforts in organizing, documenting, and interpreting inspection support documents and records.

Develops, evaluates, revises, and applies technical quality assurance protocols/methods to inspect and test in-process raw materials, production equipment, and finished products. Ensures activities and items are in compliance with both company quality assurance standards and applicable government regulations. Performs analysis and identifies trends in the inspection of finished products, in-process materials and bulk raw materials, and recommends corrective actions when necessary. Ensures that established manufacturing inspection, sampling and statistical process control procedures are followed. May assure compliance to in-house and/or external specifications and standards, such as GMPs and ISO regulations. Evaluates and analyzes the efforts in organizing, documenting, and interpreting inspection support documents and records.