Responsibilities:

1. The ECO shall pay attention to earth control measures and silt control of the Worksite including site checks and submission of reports on alternate days or more frequently if required.

2. ECOs shall use the checklist provided by QECP to carry out the ECM checks. The ECO shall review the checklist and ensure that the ECM is adequate. ECOs shall also highlight problems relating to ECM to QECP so that reviews to the ECM can be done timely.

3. The ECO shall look out for conditions/situations in construction site which causes environmental health problems. He should report these conditions/situations to the occupier of the construction site together with recommendations on remedial measures to be taken to prevent recurrence. The main areas where the ECO should pay attention to are:

· disease-bearing insects and rodents;

· proper disposal of construction waste/marine clay;

· noise, air and water pollution;

· earth littering;

· siltation of drain;

· food hygiene in canteens;

· proper maintenance of septic tank(s)/holding tank(s), chemical/portable toilet(s) and other sanitary facilities; and

· any other environmental health matters.

Requirements:

· Full time

· Registered with the Director-General of Public Health.

· At least 3 years relevant experience.

We regret to inform that only shortlisted candidate will be notified.

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

The Pest Control Technician will assists the management of Pest Control operation duties as directed by the manager. This includes managing resources, work procedure and work incidents. The candidate is also required to improve work processes and service quality for the organization and clients as part of his role in performing operational duties.

Roles & Responsibilities

a) Perform environmental control/enforcement support to the team.

b) Identify any foreseeable risk of pollution arising from the workplace or work processes.

c) Propose practical action to eliminate any foreseeable ill-health, prevention of pollution at workplace.

d) Any other ad hoc duties required or assigned by Management that are relevant to the project.

Requirements

• Registered ECO (NEA)
• At least 2 years of relevant working experience
• knowledge of all relevant environmental policies, legislations, and guidelines, independent, with strong discipline and accountability.

Job Description

• Industry/ Organization Type: General Cleaning Services
• Position Title: Pest Control Technician
• Working Location: Islandwide
• Working Hours: Monday to Friday (9 am-6 pm), Saturday (9 am-1 pm)
• Salary Package: Basic $2,000 - $2,800 + Bonus + Allowance
• Duration: Permanent

Key Responsibilities

• Conduct inspections and identify infestation sources.
• Implement targeted treatment plans using safe and eco-friendly methods.
• Educate clients on pest prevention and maintenance strategies.
• Maintain accurate records of service visits and recommendations.
• Ensure compliance with safety regulations and company standards.

APPLY NOW!!!

• Ability to work independently and in a team
• Able to commit 5.5 days a week
• Must have a valid NEA Vector Control License
• Must have a valid Class 3 Driving License

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #69357 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

现场施工经理（Construction manager）

Job Responsibilities（工作职责）:

(1) Assist the Project Manager & Senior Project Manager in the planning and execution of the Project.

(2) Close supervision, management and execution of construction works at site, including monitoring work progress and quality adherence to specifications, performance of sub-contractors.

(3) Ensure proper documentation and records of site works are carried out.

(4) Work closely with the Safety Personnel to ensure all construction safety requirements are met and strictly adhere to.

(5) Work closely with Technical Team on any technical issues arising from site and lead the supervision and resolution of work onsite.

(6) Ensure the work complies with authority regulations & requirements and project deadline is met.

(7) Any other duties that may assigned from time to time by Superiors.

Job Requirements（工作要求）:

(1) Degree in Civil & Structural Engineering (Certificates must be recognized by PE Board)

(5) At least 10 years of experience in Civil Engineering & Infrastructures works. With a actual experience of large-scale public building renovation and good relationship with the authorities will be preferred.

(2) Strong leadership and communication skills

(3) Able to work independently and under pressure

(4) Good team player & multi-tasking

(5) Good speaking and writing in both English and Chinese.

Roles & Responsibilities

Job Description & Requirements

• Assist PM in the execution of the construction activities and progress
• Coordinates project execution and planning
• Liaise closely with subcontractors, architects, consultants and authorities; set guidelines and provide expertise and supervision to the team.
• Project management, coordination, implementation, execution, control and completion of specific projects.
• Oversee the planning, analysis, and recommendations in support of project construction planning, implementation and monitoring work schedules
• Managing interfaces with other contractors working on the project.
• Provide guidance to engineers in relation to construction works, ensure progress according to schedule, quality standards are maintained site inspections are carried out and technical issues are resolved on time
• Manage contractors with a focus on quality, compliance with engineering drawings; applicable code and standards, and construction schedule and cost
• Other ad-hoc tasks within the Manager’s capability

Job Requirements:

• HDB project experience is an advantage
• Min. Degree in Mechanical or Electrical Engineering discipline or equivalent.
• Extensive experience with at least 5 years of relevant experience in Construction Industry.
• Proven track records of successful project completion on time and on budget.
• Good interpersonal and communication skills to interact with all level of staff.
• Able to work under pressure.
• Able to work on initiatives and to work as a team.

Job Description & Requirements

• Lead and oversees project execution, monitor site progress, and ensure on-time completion of the project
• Project planning and project management
• Liaise closely with subcontractors, architects, consultants and authorities; set guidelines and provide expertise and supervision to the team.
• Project management, coordination, implementation, execution, control and completion of specific projects.
• Oversee the planning, analysis, recommendations in support of project construction planning, implementation and monitoring work schedules in accordance to the master and detailed work programme.
• Liaise with consultants for technical issues and coordinate with subcontractors on the site activities .
• Assist in developing and implementing corporate construction policies that support project construction.
• Managing interfaces with other contractors working on the project.
• Provide guidance to engineers in relation to construction works, ensure progress according to schedule, quality standards are maintained site inspections are carried out and technical issues are resolved on time
• Manage contractors with a focus on quality, compliance with engineering drawings; applicable code and standards, and construction schedule and cost.
• Prepare report and method statement.
• Monitor ongoing site activities.

Job Requirements:

• Exposure into Building Construction RC Project is an advantage
• Be dynamic, self-motivated, proactive, and results-oriented with a proven track record in the construction industry.
• Extensive experience in construction industry and project management.
• Mandarin Speaking

· To assist Fumigator in carrying out fumigation & pest control services in accordance with regulatory requirements

· Notify Supervisor immediately of all incidents which are of material importance to the company such as accidents/near-misses/safety breaches/customer complaints followed by written report

· Check and ensure that all material/equipment/resources required for the day's work is available in the vehicle and in good working condition

· Always maintain sufficient stock of supplies and to submit requisition for replenishment if stock runs low.

· Maintain all equipment on board the vehicle in good working condition and to report damages/uncalibrated items immediately

· To ensure accurate reporting of fumigant stock in the vehicle at the end of each working day

· To be able to manage client's expectations and requests at work site and perform decision making if the team is able to accede to the demands within their limits, else TL will need to escalate to the Supervisor

Requirement:

1.) Driver’s License (Class 3) Required

2.) Vector Control Technician Licence

3.) Completed the following training

a.) Forklift Driver’s Licence

b.) Scissor lift Certificate

c.) Basic First Aid Course Certificate

d.) WAH Supervisor Certificate

4.) Fluency in spoken & written English

5.) Good planning and time management skills

6.) Physically Fit

7.) Ability to work in Teams, and supervise junior technicians and assistants

8.) Good interpersonal skills

9.) Good customer service skill

Roles & Responsibilities

• Lead and direct high-pressure construction projects, ensuring uncompromising quality and meeting stringent deadlines.

• Adapt sun exposure or hazard environment, like roof top works.

• Need to hands-on and do not mind to getting hands dirty • Must be able to work in day or night shift if required

• Must be able to work in weekend or public holidays if needed

• Collaborate seamlessly with stakeholders, architects, and vendors to overcome complex challenges.

• Present detailed reports, providing effective solutions for critical issues promptly. • Exhibit unwavering flexibility, working extended hours, weekends, and frequently traveling between sites.

• Any other ad-hoc duties assigned

• JOB SCOPE
• Project management of building/warehousing construction projects. Ability to oversee the entire process and knowledgeable in project management relating to all operational and administration procedures
• Carry out project planning, cost control and project documentation
• Provide the direction in construction planning, coordinate works with sub-contractors, Client and Consultants to ensure overall construction progress based on the schedule of works
• Ensure timely and smooth progress of works
• Ensure quality of works is achieved and safety & environmental regulations are complied with
• Ensure project activities complied with the Company’s ISO system
• Lead a team of project staff
• JOB REQUIREMENTS
• Diploma/Degree holder
• Minimum 5 years with relevant experience in project management of building/warehouse construction
• Dynamic and motivated personality with good communicative and interpersonal skills
• Good leadership to lead a team of project staff
• Bilingual in English and Mandarin (to be able to communicate with Mandarin speaking staff)
• Proficient in using Microsoft Office and familiar with Microsoft Project

• To assist the Project Manager or Project Engineer in the daily execution of work.
• To supervise the work of sub-contractors and in-house workers.
• To work closely with other site operations staff to meet the project schedule.
• Ensure installation is carried out as per construction drawings.
• To monitor the progress and quality of work being performed by workers.
• Ensure that works are executed within an acceptable standard of workmanship.
• Attend the daily tool-box meeting and convey clear instruction accordingly.
• Understand and ensure compliance in project requirement and scope of work.

Requirement

• At least 3 Year(s) of working experience in the related field is required for this position.
• Experiences in Structural Steel will be advantageous.
• Highly proactive attitude, self-motivated, team player, strong problem-solving and communication skills.

Project Control Executive

Job Description:

· Keep track of all internal and external project-related documents for project control purposes.

· Establish and manage a systematic filing system for all project documents, ensuring regular updates to the master tracking file.

· Coordinate with subcontractors to ensure timely submission of documents and facilitate to obtain the necessary signatures from internal stakeholders.

· Ensure all billing milestone documents are promptly signoff and forwarded to finance for billing processing.

· Prepare analytical reports and summaries of business documents, such as quotations, invoices, and purchase orders, for management review.

· Collaborate with project teams in the development and implementation of new documentation processes.

· Support the warehouse/ logistics team in managing the receipt of materials from suppliers or subcontractors.

· Ensure completeness and accuracy of project documentations including Precal and etc.

· Oversee inventory management, conduct interim and annual stocktakes, and perform stock reconciliation.

· Manage fixed asset record and ensure compliance with company procedure.

Job Requirements:

· ITE or Diploma in Business Administration, Finance Management or a related field.

· Preferably 2 - 3 years of experience in administration related to project control within the construction or engineering industry.

· Basic accounting knowledge is an advantage.

· Meticulous and systematic approach in daily tasks.

· Effective communication skills and be able to collaborate with team members, sub-contractors and customers.

· Fast learner and a team player.

• Making plans using detailed drawings
• Preparing estimates and budgets
• Creating accurate project specifications
• Designing engineering experiments
• Creating technical reports for customers
• Completing regulatory documents concerning safety issues
• Finishing projects on time and within budget
• Communicating with clients and coworkers about analysis results

Responsibilities:

• Manages Module (EPCC) fabrication project as per contractual specification and quality standard with agreed timeline and safely.
• Enforces on HSE Focus IOGP/HIRA, Safety audit, Safety Campaigns and Drills. Conduct VSCC, weekly HSE walkthrough to focus on critical work area and carryout engagement of workforce on site.
• Good experience in EPCC module project. Manage from design phase till construction to commissioning phase.
• Coordinates construction scope and execution plans with engineering, procurement, installation, operations, interface management and other key FPSO groups
• Performs Continuous review on construction progress against Project Schedule and report to Project Management Team
• Ensures all issued drawing and documentation are latest revision and filed in order.
• Performs oversee module fabrication and assembly. To follow through the integration scope of work for module fabrication from overseas
• Identifies the need for, and participate in, constructability reviews
• Attends Daily/weekly/monthly meeting with shipyard (Builder), Client, Classification and etc
• Ensures meeting summarize and issue minutes of meeting, Presentation slide and reports (daily, weekly, and monthly)

Requirements:

• Bachelor degree or Diploma in Naval Architecture / Civil / Marine and Offshore / Mechanical / Electrical / Chemical Engineering
• At least 8 years of relevant working experience
• Good in verbal and written communication in English. Possess good organizational, communication skills, presentation, and Reporting skills. The leadership and Supervisory skill to manage project team and shipyard.
• Knowledge of Shipyard Operations will be an added advantage
• Knowledge of Shipbuilding role and regulation, classification society ABS / MODU Regulatory rules
• Knowledge of Project related software (auto-cad viewer, Microsoft projects etc)
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment
• Understands Shipbuilding role and regulation, classification society ABS / MODU / SOLAS /BRC Regulatory rules

Our Address and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Boulevard Yard)
80 Tuas South Boulevard, Singapore 637051
(Islandwide transport provided)

(Admiralty Yard)

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Description

• To assist the Project Manager or Project Engineer in the daily execution of work.
• To supervise the work of sub-contractors and in-house workers.
• To work closely with other site operations staff to meet the project schedule.
• Ensure installation is carried out as per construction drawings.
• To monitor the progress and quality of work being performed by workers.
• Ensure that works are executed within an acceptable standard of workmanship.
• Attend the daily tool-box meeting and convey clear instruction accordingly.
• Understand and ensure compliance in project requirement and scope of work.

Requirement

• At least 3 Year(s) of working experience in the related field is required for this position.
• Experiences in Ceiling and Partition will be advantageous.
• Possessed of SCWSH (BCSS) is mandatory.
• Highly proactive attitude, self-motivated, team player, strong problem-solving and communication skills.
• Good written and spoken English.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Contract Duration:

• 3 Months
• Staring Date: 1 Feb 2025

Deployment:

• Mon to Saturday - 8.30 am to 5.30 pm (6 Days/ Week)

Job Details:

• Project Under HDB.
• Conduct regular inspections and risk assessments at the workplace to identify any foreseeable risk arising from the workplace or safe work processes
• Recommend reasonable measures to eliminate any foreseeable risk at the workplace
• Ensure all statutory regulations are comply with NEA’s requirements
• Prepare and submit weekly environmental report
• Enforce & improve Workplace Safety and Health / Environmental Control standard at the workplace
• Any other duties as assigned by superior(s)

Requirement:

• Must be a NEA Apporved ECO.
• Atleast 2 Yrs experience as ECO.
• Preferably with Advance diploma in Workplace safety certificate.

Job description

A reliable Engineer of Quality Assurance to ensure that all external and internal requirements are met before our product reaches our customers. She will be responsible for inspecting procedures, outputs and identifying mistakes or non-conformity issues.

An excellent Engineer with industry proficiency in 2D/ 3D dimensional inspection, Knowledge of geometric measurements and CMM. She is equipped with rich experience, quality control background with eagle eyes and if obtained a certification of ISO 13485/ 9001 Quality Management Systems Internal Auditor added an advantage.

A reliable, trustworthy and competent professional whose approval will be necessary for the continuation of a business life cycle. The goal of the quality management system is to assure the high quality of our operations and services aiming to the long-term success of our business.

Duties & Responsibilities

1. Conduct the training of ISO 9001:2015/ 13485:2016 for work procedures to operation and production

2. In-house training to guide inspectors, technicians and other staff for engineering symbol & geometric dimensioning & tolerance drawing quality specification

3. Supervise equipment and tools are duly calibrated

4. Devise procedures to inspect and report quality issues

5. Assure the reliability and consistency of production by checking processes and final output quality of finished parts/ components and materials

6. Monitor all operations that affect quality

7. Report all malfunctions to production manager to ensure immediate action

8. Implement corrective action (CAR) / non-conforming report to operations effectively

9. Facilitate proactive solutions by collecting and analysing quality data

7. Keep records of quality reports, statistical reviews and relevant documentation

8. Review current standards and policies, work procedure (SOP), and update written procedures (DCN), engineering work instructions or specifications (ECN)

9. Work as a team to evaluate, validate customer quality issues and complaints, or/ and special quality requirements from customers for quality assurance on geometric symbol, tolerance and dimensioning

10. Communicate with external quality assurance officers during on-site inspections

11. Appraise customers’ requirements and make sure they are satisfied

12. 5.5-day work week

Requirements

Ability to read and interpret engineering drawings is a strong advantage

1. Degree/ Diploma in engineering or relevant field

2. Proven experience as a quality assurance engineer or relevant role

3. Thorough knowledge of methodologies of quality assurance and standards

4. Excellent numerical skills and understanding of data analysis/statistical methods

5. Resourceful and attention to detail and a results driven approach

6. Excellent organizational and leadership abilities with good communication and interpersonal skills

ClearSK Healthcare Pte Ltd An international aesthetics clinic chain headquartered in Singapore, with presence in Shanghai, Hangzhou and now Kuala Lumper, is looking for suitable candidates for the above positions. In your role you will have opportunities to work alongside doctors, para-medical and finance professionals. For the motivated candidates, this is opportunity to earn high income but also a chance to learn and grow in your career.

To fit in with our culture of excellence, we look for only the F.I.T.: Fast, Innovative and Trainable as well as commitment, integrity and professional skills

Job Responsibilities:

· Report to Financial Controller who is a qualified CPA / Chartered Accountant

· Execute the company’s inventory policy

· Manage the company’s inventory system including stock profiles and locations

· Churning of necessary daily and weekly Inventory/Purchasing reports

· Ensure incoming goods are receipted and managed appropriately in Finance aspect

· Review historical data to build timely forecasts for assigned markets

· Responsible for planning periodic stock checks via audit work and stock takes

· Perform reconciliation or audit after physical counts and liaise with business units to rectify variance

· Monitor inventory stock -cards and systems to maintain safety stock level to avoid ‘’out-of-stock’’ situations

· Audit check on stock flow accuracy

· Timely update stock movement in physical stock-card and inventory system

· Check on supplier invoices

· Assist in other financial matters

Qualifications and Requirements:

• Minimum Bachelor's degree in Business, Analytics, Accounting, Finance, or a related field
• Good in planning and organizing work flow, with strong in numeracy, analytical and good interpersonal and communication skills
• Enjoy working in fast-paced and dynamic environment independently
• Diligent in checking work to ensure no errors before submitting to superiors for review
• A multi-tasker and learner with self-motivation and sensitive with figures
• Comfortable with computerized data processing and able to comprehend tables and spreadsheet templates
• Diligent in checking work to ensure no errors before submitting to superiors for review
• Familiarity with accounts payable processes and administration
• Exceptional attention to detail and commitment to accuracy

Application process:

Should you wish to be considered for shortlisting, please complete the attached Google Form at the link below prior to submitting your application on MyCareersFuture:

https://forms.gle/ZdnDCJYqZ916n8iQ7

Please be advised that only candidates who have completed the form and are subsequently shortlisted will be notified.

Responsibilities

• Organise and conduct regular credit and accounts receivable review meetings with business units and sales departments to resolve delinquent accounts.
• Follow up and communicate with customers regarding outstanding payments.
• Review and process new customer account applications.
• Maintain and update customer account details and credit limits in SAP.
• Monitor daily sales transactions for credit holds in SAP and communicate with the sales department to address overdue issues.
• Disseminate invoices, statements of accounts, reminder, and confirmation letters.
• Perform customer account reconciliations and confirmations.
• Prepare regular collections and accounts receivable status reports for management.
• Liaise with insurers to apply for trade credit insurance for customer accounts with credit terms.
• Liaise with banks regarding bank guarantees, including letters of credit.
• Verify supporting documents to carry out billings to customers.
• Perform other ad hoc duties as assigned

Requirements:

• Minimum of 1 year of relevant experience
• Proficiency in SAP software is an advantage
• Good time management skills, ability to meet deadlines, and strong attention to detail
• Good team player with the ability to work independently

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: QX3XY593

ClearSK Healthcare Pte Ltd manages the award-winning ClearSK® chain of medi-aesthetic centres in Singapore, Shanghai and Hangzhou China. As a Singapore leading aesthetics chain, it will be a great opportunity for you to grow and learn in a multi-disciplinary environment with medical and management professionals. You will find yourself working in a challenging environment, where your capabilities will be developed to the maximum potential.

To fit in with our culture of excellence, we look for only the F.I.T.: Fast, Innovative and Trainable as well as commitment, integrity and professional skills

Job Responsibilities:

· Report to Financial Controller who is a qualified CPA / Chartered Accountant

· Execute the company’s inventory policy

· Manage the company’s inventory system including stock profiles and locations

· Churning of necessary daily and weekly Inventory/Purchasing reports

· Ensure incoming goods are receipted and managed appropriately in Finance aspect

· Review historical data to build timely forecasts for assigned markets

· Responsible for planning periodic stock checks via audit work and stock takes

· Perform reconciliation or audit after physical counts and liaise with business units to rectify variance

· Monitor inventory stock -cards and systems to maintain safety stock level to avoid ‘’out-of-stock’’ situations

· Audit check on stock flow accuracy

· Timely update stock movement in physical stock-card and inventory system

· Check on supplier invoices

· Assist in other financial matters

Requirements:

· Minimum Diploma or Degree in Finance, Accounting or Business fields

· 2 years of relevant experience preferably from service / hospitality / healthcare / retail industry

· Recent university or polytechnic graduates in relevant fields without work experience but with good attitude and academic records are welcome to apply.

· Candidate who are undergoing CPA training program are welcome to apply

· Experience working in fast-growing SMEs will be an advantage

· Good in planning and organising work flow, with strong in numeracy, analytical and good interpersonal skills

· Proficient in English communication and writing.

· Ability to read, write, and converse in Chinese will be an added advantage as liaising with our counterparts in China and Chinese customers.

· Enjoy working in fast-paced and dynamic environment

· A multi-tasker and learner with self-motivation and integrity

· Strong proficiency in Excel and proficient in Office applications such as Word, PowerPoint and IT systems

Rewards & Benefits

5-day work week

Medical Benefits

Opportunity to embark on Management Trainee Program

Reward and recognition program that appreciate the most competent and brightest

Promotion based on performance

Exclusive staff discounts on our products and services

Application process:

Should you wish to be considered for shortlisting, please complete the attached Google Form at the link below prior to submitting your application on MyCareersFuture:

https://forms.gle/ZdnDCJYqZ916n8iQ7

Please be advised that only candidates who have completed the form and are subsequently shortlisted will be notified.

ClearSK Healthcare Pte Ltd manages the award-winning ClearSK® chain of medi-aesthetic centres in Singapore, Shanghai and Hangzhou China. As a Singapore leading aesthetics chain, it will be a great opportunity for you to grow and learn in a multi-disciplinary environment with medical and management professionals. You will find yourself working in a challenging environment, where your capabilities will be developed to the maximum potential.

To fit in with our culture of excellence, we look for only the F.I.T.: Fast, Innovative and Trainable as well as commitment, integrity and professional skills

Job Responsibilities:

· Report to Financial Controller who is a qualified CPA / Chartered Accountant

· Execute the company’s inventory policy

· Manage the company’s inventory system including stock profiles and locations

· Churning of necessary daily and weekly Inventory/Purchasing reports

· Ensure incoming goods are receipted and managed appropriately in Finance aspect

· Review historical data to build timely forecasts for assigned markets

· Responsible for planning periodic stock checks via audit work and stock takes

· Perform reconciliation or audit after physical counts and liaise with business units to rectify variance

· Monitor inventory stock -cards and systems to maintain safety stock level to avoid ‘’out-of-stock’’ situations

· Audit check on stock flow accuracy

· Timely update stock movement in physical stock-card and inventory system

· Check on supplier invoices

· Assist in other financial matters

Requirements:

· Minimum Diploma or Degree in Finance, Accounting or Business fields

· 2 years of relevant experience preferably from service / hospitality / healthcare / retail industry

· Recent university or polytechnic graduates in relevant fields without work experience but with good attitude and academic records are welcome to apply.

· Candidate who are undergoing CPA training program are welcome to apply

· Experience working in fast-growing SMEs will be an advantage

· Good in planning and organising work flow, with strong in numeracy, analytical and good interpersonal skills

· Proficient in English communication and writing.

· Ability to read, write, and converse in Chinese will be an added advantage as liaising with our counterparts in China and Chinese customers.

· Enjoy working in fast-paced and dynamic environment

· A multi-tasker and learner with self-motivation and integrity

· Strong proficiency in Excel and proficient in Office applications such as Word, PowerPoint and IT systems

Rewards & Benefits

5-day work week

Medical Benefits

Opportunity to embark on Management Trainee Program

Reward and recognition program that appreciate the most competent and brightest

Promotion based on performance

Exclusive staff discounts on our products and services

Application process:

Should you wish to be considered for shortlisting, please complete the attached Google Form at the link below prior to submitting your application on MyCareersFuture:

https://forms.gle/ZdnDCJYqZ916n8iQ7

Please be advised that only candidates who have completed the form and are subsequently shortlisted will be notified.

ClearSK is an equal opportunity employer and we encourage all qualified candidates to apply.

Job Description & Requirements

• Monitor and manage day-to-day operations of projects, or function, including developing and monitoring budgets, coordinating activities with other sub-contractors
• Plan the work schedule and efficiently organize the site facilities in order to meet an agreed program of deadlines
• Liaise with consultants and/or sub-contractors engaged on the project
• Attend regular meetings with owner/client/contractors/sub-contractors and ensure the progress is on schedule
• Resolve any unexpected technical difficulties and other problems that may arise
• Monitor and ensure subcontractors comply with specified requirements
• ldentify and comply with all applicable statutory regulatory requirements related to project
• Identify possible risks to project and stakeholders as well as create contingency plans to mitigate these risks
• Respond swiftly to work delays, emergencies and other problems
• Clear communication to external parties including client, subcontractors, consultants, vendors etc. on project needs, requirements and schedule by means of daily construction oversight
• Review all method statement of the activities ensuring safe execution and maximization of resources used for job efficient
• Prepare monthly site report updating the latest progress and planning to achieve the project milestone
• Complete task as assigned by Project Manager and Project Director

Requirement:

• Candidate must possess at least Bachelor's Degree in Civil Engineering
• At least 12 years of engineering experience in the related field is required for this position
• At least 5 years of experience in managing civil and infrastructure construction work for projects of similar scale, complexity and nature of work
• Work as Team leader, leading team on project requirements and target achievement
• Acting as rigorous preson on Identify possible risks in project

• Responsible for all works related to Site Supervisor / Coordinator duties.

· Carry out daily site supervision, coordination and quality assurance of all trade implementation on site.

· Ensure works are carried out in accordance with updated drawings, specifications, method of statements, master programme and consultants site instructions.

· Liaise with Clients, Consultants, RE / RTO to carry out site inspection and attend weekly /monthly meeting.

· Manage procurement of all site resources including sub-contractors, suppliers, manpower, materials and machinery etc. Scheduling manpower, materials and equipment on site, carry out materials and equipment receiving, inspection and maintaining record. All delivery order must be returned to office for record.

· Monitor and control material unsafe on site to avoid unnecessary wastage or wrongly usage.

· Assist project manager or project engineer with any other duties as assigned.

• Driving liense class 3.