Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 2 years of experience in Quality Management System and NADCAP

Reponsibilities:

Documentation:

Responsible for preparing Final QA documents and Submission in Customers portal.

Responsible for preparing the job routers.

Handling TPI and NDE activities:

Generation of issue notes for supplier activities.

Handle and support third party inspectors

Handle and support NDE activities

Responsible for collection and verification of supplier’ NDE process reports

Calibration and Maintenance of instruments:

Maintain master list for all the instruments under Quality department and production.

Regular calibration and maintenance procedures should be established to ensure continued accuracy and performance., periodically monitoring the calibration requirements

Communication:

Effective communication is vital in this role. QA communicate quality-related issues to relevant departments, including production and to Quality Control.

Reporting:

Reports to assistant Manager – Quality and assisting on ad hoc responsibilities

Safety:

Ensuring the safety of the quality control team and compliance with safety protocols is another important aspect of the job.

Requirements:

• Minimum Diploma in Material Engineering or relevant engineering discipline.
• At least 3 years of working experience related to the manufacturing environment, preferably from the oil & gas industry.
• Able to interpret drawings and technical documents
• Able to work independently and contribute to the team excellence
• Good technical competence & strong communication skills
• Good organizing and coordination skills
• NDE level 2 inspector is an advantage

Position Overview:

As the Quality Manager, you will be responsible for ensuring the highest quality standards in the development and production of biomedical products. You will lead and manage quality assurance activities across the production process, ensuring compliance with regulatory requirements, industry standards, and company policies. You will play a pivotal role in driving continuous improvement initiatives and fostering a culture of quality within the organization.

Key Responsibilities:

• Oversee and manage the company's Quality Management System (QMS), ensuring compliance with ISO 13485, FDA regulations, and other applicable standards.
• Develop, implement, and maintain quality assurance policies and procedures.
• Lead quality audits, internal and external inspections, and regulatory compliance assessments.
• Monitor and report on quality performance metrics, identifying trends and areas for improvement.
• Manage the resolution of non-conformances, corrective actions, and root cause analysis.
• Collaborate with cross-functional teams (e.g., R&D, Manufacturing, Regulatory Affairs) to ensure product quality throughout the product lifecycle.
• Ensure proper documentation and traceability for all quality-related activities.
• Train and mentor staff on quality processes and regulatory requirements.
• Maintain relationships with regulatory bodies, customers, and suppliers to ensure ongoing compliance and quality standards.

Job description

A reliable Engineer of Quality Assurance to ensure that all external and internal requirements are met before our product reaches our customers. She will be responsible for inspecting procedures, outputs and identifying mistakes or non-conformity issues.

An excellent Engineer with industry proficiency in 2D/ 3D dimensional inspection, Knowledge of geometric measurements and CMM. She is equipped with rich experience, quality control background with eagle eyes and if obtained a certification of ISO 13485/ 9001 Quality Management Systems Internal Auditor added an advantage.

A reliable, trustworthy and competent professional whose approval will be necessary for the continuation of a business life cycle. The goal of the quality management system is to assure the high quality of our operations and services aiming to the long-term success of our business.

Duties & Responsibilities

1. Conduct the training of ISO 9001:2015/ 13485:2016 for work procedures to operation and production

2. In-house training to guide inspectors, technicians and other staff for engineering symbol & geometric dimensioning & tolerance drawing quality specification

3. Supervise equipment and tools are duly calibrated

4. Devise procedures to inspect and report quality issues

5. Assure the reliability and consistency of production by checking processes and final output quality of finished parts/ components and materials

6. Monitor all operations that affect quality

7. Report all malfunctions to production manager to ensure immediate action

8. Implement corrective action (CAR) / non-conforming report to operations effectively

9. Facilitate proactive solutions by collecting and analysing quality data

7. Keep records of quality reports, statistical reviews and relevant documentation

8. Review current standards and policies, work procedure (SOP), and update written procedures (DCN), engineering work instructions or specifications (ECN)

9. Work as a team to evaluate, validate customer quality issues and complaints, or/ and special quality requirements from customers for quality assurance on geometric symbol, tolerance and dimensioning

10. Communicate with external quality assurance officers during on-site inspections

11. Appraise customers’ requirements and make sure they are satisfied

12. 5.5-day work week

Requirements

Ability to read and interpret engineering drawings is a strong advantage

1. Degree/ Diploma in engineering or relevant field

2. Proven experience as a quality assurance engineer or relevant role

3. Thorough knowledge of methodologies of quality assurance and standards

4. Excellent numerical skills and understanding of data analysis/statistical methods

5. Resourceful and attention to detail and a results driven approach

6. Excellent organizational and leadership abilities with good communication and interpersonal skills

质量工程师（Quality Engineer)

Responsibilities:

To manage the Quality Assurance & Quality Control (QA/QC) function so that quality products/services are supplied.

Liaison with customers, consultants, engineers, inspection bodies and suppliers on matters relating to quality assurance.

Coordinating with Production/Plant Managers to conduct investigations on quality deficiencies.

Conduct site visits to ensure that quality of products supplied is within design parameters.

Co-ordinate all QA/QC operations to ensure that customers are satisfied with the level of products/service provided.

Co-ordinate with the Sales and Production Departments to ensure that customer complaints are professionally and efficiently resolved.

Develop QA/QC systems and set achievable targets

Ensure Production comply with quality procedures.

Assist Project Management team on project/safety for daily activities and Quality Management

Work with Production Manager and Plant Manager to minimize defects

Comply with all requirements for the continuity of ISO certifications

Requirement:

Relevant Qualifications in Engineering or equivalent

possess training certificate in ISO Quality Management System, Quality Engineer, CONQUAS, BCA-Good Industry Practices would be advantageous

Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity

Strong communication and interpersonal ability, coupled with influencing skills

Independent and a self-starter, with strong personal drive to initiate and implement

Job Description & Requirements

Perform inspection including the use of gages and equipments and document quality paperwork meeting the Engineering Print, Job Instruction Sheets and/or the QMS Instructions. To support all CORE, EH&S and Continuous Improvement activities.

Roles and Responsibilities

• Perform job inspection at first piece, in process and final inspection per the Job Instructions Sheet plans.
• Perform First Article Inspection (FAI) and Delta FAI per AS9102 requirements.
• Perform dimensional inspection using a variety of inspection gages & equipment.
• Initiate Quality Notification (QN) for non-conformance when products are not meeting Quality and Engineering requirement.
• Perform proper use and maintenance of gages and inspection equipment.
• Perform proper documentation including inspection stamping of quality paperwork.
• Maintain and improve 5S standards on workstations and responsible areas.
• Good communication and interpersonal skill and ability to communicate with all levels.
• Adhere to company EH&S policies and guidelines.
• Adhere to company Quality Policy.

Qualification and Education Requirements

• Minimum Education required (specific field or equivalent):
• NITEC qualification in Precision/Mechanical Engineering or higher.
• Minimum years of experience in role: At least 2 years of working experience in a quality control environment.

Preferred Skills (if any):

• Able to interpret basic technical (GD&T) drawings.
• Proficient in using hand gages; micrometer, dial indicator, height gage etc.
• Good command of written and spoken English.
• Basic operating knowledge of Co-Ordinate Measuring Machine (CMM) inspection; Carl Zeiss / Wenzel CMM.
• General proficiency of Microsoft Excel and Microsoft Word (SAP a plus).
• Non Destructive Testing (NDT) method in MPI Level 2 will be an added advantage.
• Able to perform weekly rotating shifts.

Working Location: Bedok South

About NETS

The NETS Group is a leading payments services group, enabling digital payments for merchants, consumers and banks across the entire payments value chain.

The Group operates Singapore’s national debit scheme enabling customers of DBS Bank/POSB, HSBC, Maybank, OCBC Bank, Standard Chartered Bank and UOB to make payments using their ATM cards or mobile devices at more than 130,000 acceptance points in the country as well as online payments.

Position Overview

Quality Checker team of Card Centre performs quality checks on every card mailers after card personalization, ensuring that we meet our service level on accuracy.

Key Responsibilities

• Responsible for performing quality checks on Bank cards
• Meeting Service Levels of the Banks
• Performing end day reconciliation for internal reporting
• Other ad-hoc duties

Requirements

• Minimun qualification, Nitec
• Prior working experience in production line highly preferred
• Meticulous & eye for detail
• Must be able to commit 5.5 days work week

Quality Controller/GAP Coordinator

Job Description

The Quality Control/GAP Coordinator is responsible for ensuring all products received perishable and nonperishable are of standard as per the company’s specifications. This role must also ensure supply security and FIFO practices.

Scope: Singapore (Choa Chu Kang farm)

Working Days: 5.5

Reporting into: Head of Farm Operations

In This Role You Will (Responsibility):

· Ensure incoming and outgoing goods (perishable and non-perishable) meet company and GAP standards.

· Daily inspection of production areas to ensure compliance with company and GAP standards.

· Analyse quality data and summarise findings.

· Generate inspection reports.

· Conduct quality assurance reports.

· Conduct internal self-audits of processes and procedures.

· Prepare quality assurance documents in compliance with local regulations and GAP standards.

· Ensure quality testing (shelf-life samples) and laboratory microbial testing is done in accordance with GAP standards.

· Ensure staff training is done to comply with GAP and Food Safety requirements.

Traits

• Continuously learning and challenge the status quo.
• Willingness to join and grow with a dynamic company.
• Strong bias for action.

· Must be energetic and hands-on to take on new and challenging tasks and to work well with limited resources and a strong sense of accountability.

Assist operation in problem solving and execute improvement initiatives

Key Responsibilities

Functional and Automation testing experience including tools such as Selenium, UFT, JIRA, Postman

• Degree in software engineering, computer engineering, electrical engineering or infocomm-related discipline
• Must have professional software quality testing experience with hands-on automation
• Strong understanding of testing techniques, risk analysis
• Strong understanding of test-driven development, continuous integration and continuous delivery
• Experience with automation scripting (i.e. Python and shell scripts)
• Experience with open-source automated testing frameworks (i.e. RobotFramework, Selenium Webdriver)
• Experience with open-source performance testing tools (i.e. JMeter, Gatling, Locust) or enterprise level testing tools (HP LoadRunner)
• Experience with open-source penetration testing tools (ZAP, Burp Suite, SQL Map) or enterprise level penetration testing tools (HP WebInspect, Nessus, CheckMarx)
• Working experience in Agile environment will be an added advantage
• Excellent verbal communication and listening skills
• Proactive, self-driven and motivated

Main duties and responsibilities :

1. Incoming QA(IQA) and Outgoing QA (OQA) Inspection
2. Quality Wall (QW) buy off
3. Weekly process audit
4. Non Conformance Material Report (NCMR)

Experience and knowledge :

1. Min "O” level with 3 years of related experiences in a manufacturing environment.
2. Knowledge of Microsoft (words, excel and ppt) is a must.
3. Knowledge of Stamping, Plating, Molding and Connector Assembly is an added essential.

Skill Required :

1. Good knowledge on measurement methodology and equipment (profile projector, TM scope, OGP smart scope).
2. Exposure in Process and QMS Audit.
3. Knowledge of Quality tools such as SPC and 7 QC tools.
4. Good interpretation of product drawing, specification and Inspection Plan.

Job Requirement :

1. Able to work independently
2. Able to work rotation shift

Roles & Responsibilities

Technician Responsibilities:

• Inspecting, analyzing, and troubleshooting systems and equipment.
• Carry out troubleshooting and minor repairs to building works and M&E works including air-conditioning, electrical, plumbing and fire protection system.
• Involved in coordination and supervisor of construction works
• Responsible for planning, managing and ensuring smooth implementation and monitoring of projects assigned
• Responsible for effective site management which include safety inspection and quality control of materials and plants on site
• Required to plan, lead and monitor progress and performance against the project plan whilst managing the day-to-day operational aspects of projects which includes manpower planning, construction progress monitoring, preparation of master schedule and cost control.

Technician Requirements:

• Any Degree
• Experience as a technician.
• Ability to multitask and liaise with professionals in different fields.
• Ability to explain problems simply and clearly.
• Proficiency in MS Office.
• Ability to understand verbal and written instructions.
• Ability to follow health and safety regulations.
• Excellent mathematical and problem-solving skills.

Responsibilities:

• Report and assist Project Manager (PM) on project functions included but not limited to project management, site management, risk control management etc. to meet the project(s) goals
• Close supervision, management and execution of construction works at site, including monitoring work progress and quality adherence to specifications, performance of sub-contractors.
• Ensure proper documentation and records of site works are carried out.
• Work closely with the Safety Personnel to ensure all construction safety requirements are met and strictly adhere to.
• Work closely with Technical Team on any technical issues arising from site and lead the supervision and resolution of work onsite.
• Conduct technical reviews to ensure compliance with Contractual requirements and target completion date is met;
• Liaise with Client’s Representatives, Consultants and/or Contractors engaged on the project and attend regular meetings so as to ensure the progress is on schedule;
• Ensure the work complies with authority regulations & requirements and project deadline is met.
• Any other duties that may be assigned from time to time as your superior/management deem fit.

Requirements:

• Bachelor’s degree in civil & Structural Engineering
• At least 5 years of experience in construction industry. Working with main contractor experience and Singapore project experience preferred.
• Strong leadership and communication skills
• Able to work independently and under pressure.
• Good team player & multi-tasking
• Good speaking and writing in both English and Chinese.

Roles & Responsibilities

A Main Construction Project Coordinator is responsible for overseeing, coordinating, and managing construction projects to ensure they are completed on time, within budget, and according to specifications.

Job Description

1. Project Planning: Develop comprehensive plans, schedules, budgets, and resource allocation.

2. Project Execution: Supervise and direct the project team to ensure work meets quality standards.

3. Team Management: Lead and manage the project team, ensuring effective communication and collaboration.

4. Issue Resolution: Identify and address issues, devise solutions, and take appropriate actions.

5. Quality Assurance: Ensure adherence to quality standards, conduct inspections and audits.

6. Progress Monitoring: Monitor project progress, address delays and changes promptly.

7. Compliance: Ensure compliance with laws, regulations, safety, and environmental requirements.

8. Risk Management: Identify, assess, and mitigate risks.

9. Reporting: Provide regular progress reports to stakeholders.

Job Requirements

1. Education: Bachelor's degree in Construction Management, Civil Engineering, or a related field.

2. Experience: Minimum 5 years in construction project management. Familiarity with construction software and technologies

3. Track Record: Proven success in managing construction projects.

4. Ability to work under pressure and handle multiple tasks. Willingness to travel or work on-site when required.

5. Good communication, leadership, and problem-solving skills.

(Having Class 3 Driving Licence will be an advantage. Company vehicle may be provided for work related matter.)

Monday to Friday (9.00am-6.00pm), and Saturday (9.00am-1.00pm).

(Working hours may vary depending on project work requirements.)

Job Description

• Executes and completes the FPSO new built Hull project as per contractual specification and quality standard with agreed timeline and safely
• Enforces on HSE Focus IOGP/HIRA/GOLDEN Rule, Safety audit, Safety Campaigns and Drills. Weekly HSE walkthrough to focus on critical work area and carryout engagement of workforce on site.
• Oversees new build specifications, verifies designs, and ensures that the construction activities are complying to contract and engineering designs.
• Reviews construction progress against Project Schedule and report to the Hull delivery manager
• Ensures that all construction and installations to FPSO are performed according to project Quality control, NDE examiners, inspection, QA/QC document, report, and quality analysis.
• Ensures the new built hull is constructed according the latest revision of the issued drawings.
• Oversees hull fabrication and assembly works. To follow through the integration scope of work for module fabrication from overseas
• Ensures that the hull is commissioned as per project commissioning requirement
• Conducts daily/weekly/monthly meeting with shipyard (Builder), Client, Classification and etc
• Summarizes and issues minutes of Meeting, Presentation slide and reports (daily, weekly, and monthly)

Job Requirements:

- Degree or Diploma in Naval Architecture / Civil / Marine and Offshore / Mechanical / Electrical / Chemical Engineering.
- At least 2 years of relevant working experience
- Good analytical and problem-solving skills
- Possess good interpersonal and communication skills
- Able to multi-task and able to work in a fast-paced environment

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Admiralty Yard)

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

(Pioneer Yard)

50 Gul Road, Singapore 629353

(Islandwide transport provided)

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Working hours

(All Yards)

Monday – Thursday: 8:00am – 5.15pm

Friday: 8:00am – 4.30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Roles & Responsibilities

• Manage construction activities to make sure that compliance with cost, time, contract specification, health and safety, quality and environmental requirements are achieved; manage the delvelopment and implementation of programmes associated with project plans.
• Oversee and direct construction projects from conception to completion.
• Participate in the evaluation of the suitability of subcontractors.
• Review the project in-depth to schedule deliverables and estimate costs.
• Liaise with subcontractors and other service providers in relation to programmes and workmanship.
• Oversee all onsite and offsite constructions to monitor compliance with building and safety regulations.
• Coordinate and direct construction workers and subcontractors.
• Ensure quality construction standards and the use of proper construction techniques.
• Liaise with the safety personnel to undertake risk assessment and develop suitable control methods.

Job Requirements

• Minimum 12 years of engineering experience with Degree in Civil Engineering recognised by the PE Board or qualification acceptable to the Commissioners of Building Control as eligible for application as a Resident Engineer or recognised Degree in relevant field subject to the acceptance of the Engineer.
• At least 10 years of experience in managing construction teams for projects of similar scale and complexity.
• Competent in conflict and crisis management.
• Leadership and human resources management skills.

Skills and Knowledges

• Leadership and project management skills.
• Persistence and determination.
• Able to use your initiative.
• Excellent verbal communication skills

Responsibilities

• Collaborate with engineers, architects etc. to determine the specifications of the project
• Negotiate contracts with external vendors to reach profitable agreements
• Obtain permits and licenses from appropriate authorities
• Determine needed resources (manpower, equipment and materials) from start to finish with attention to budgetary limitations
• Plan all construction operations and schedule intermediate phases to ensure deadlines will be met
• Acquire equipment and material and monitor stocks to timely handle inadequacies
• Hire contractors and other staff and allocate responsibilities
• Supervise the work of laborers, mechanics etc. and give them guidance when needed
• Evaluate progress and prepare detailed reports
• Ensure adherence to all health and safety standards and report issues

Requirements and skills

• Proven experience as construction project manager
• In-depth understanding of construction procedures and material and project management principles
• Familiarity with quality and health and safety standards
• Good knowledge of MS Office
• Familiarity with construction/ project management software
• Outstanding communication and negotiation skills
• Excellent organizational and time-management skills
• A team player with leadership abilities
• BSc/BA in engineering, building science or relevant field
• PMP or equivalent certification will be an advantage

The Career Conversion Programme (CCP) (Train-and-Place with Commitment to Hire) for Advanced Biopharmaceuticals Manufacturing Executives/Professionals is a talent development programme aimed at building the next generation of skilled manpower for Singapore’s Biopharmaceuticals manufacturing industry in anticipation of hiring demand.

The training programme consists of 15 months of local attachment with GSK. Due to the nature of the programme, we can only consider Singapore Citizens and Singapore Permanent Residents. For more information, please visit Career Conversion Programmes (CCP) for Individuals

Purpose:

• To perform testing and support related activities in QC Biological team

Key Responsibilities:

• Perform routine and adhoc/ non-routine testing in the following areas with good observation of GMP requirements:
• Biological testings for raw materials release (All QA controlled materials). Biological testings refer to biochemistry and/ or microbiological testings.
• Biological testings for intermediates and product
• Biological testings for utilities (city water, purified water, water of injection, compressed gases, etc)
• Biological testings required to support manufacturing process validations and confirmations
• Perform routine environmental sampling in controlled environmental areas
• Initiate and participate in laboratory investigation (OOS / deviations / atypical results / invalid results) and assist in timely closure of the investigation and CAPA
• Perform equipment calibration, maintenance and validation
• Participate in method transfer / verification / validation
• Participate in peer review for verification of task and data
• Assist in SOP writing
• Identify and report problems in QC to QC Superintendent in a timely manner
• Practice 6S and ensure good housekeeping of laboratory, work area and equipment
• Ensure good inventory of QC materials (purchased and prepared materials / glassware) to support testings; ensure no over surplus of inventory
• Ensure wastes are disposed appropriately and promptly
• Adheres to all safety and security policies and practices
• Assist the Senior Superintendent/Superintendent in the management and operations of the team; may be indirectly responsible for a team of associates:
• Scheduling day-to-day shopfloor activities and resources handling to ensure timely availability of test results
• Reviews test reports to ensure accuracy of test results in accordance with corporate, regulatory and external agency regulations.
• Provides training to the team.
• Provides guidance, support and technical expertise to the team.
• Involves in investigation and protocol writing (when required)
• Involves in SOP writing and updating
• Organization and Problem Solving:
• Creates strong team morale and a culture of accountability and ownership
• Recommends and coordinates appropriate corrective actions to quality problems in conjunction with other teams/ departments
• Presents in timely manner major issues to the management with strategies on their resolution.

Skills:

Professional

• For QC Associate, fresh graduate in NITEC/ Diploma in Microbiology, Biotechnology, Life Sciences, Chemistry, Biochemistry
• For Senior QC Associate, NITEC/Diploma in Microbiology, Biotechnology, Life Sciences, Chemistry, Biochemistry, with at least 2 years of working experiences or Fresh degree holder in Microbiology Biotechnology, Life Sciences, Chemistry, Biochemistry. Increased number of years of experiences are required for higher positions.
• For Lead QC Associate, NITEC/Diploma in Microbiology, Biotechnology, Life Sciences, Chemistry, Biochemistry, with at least 8 years of working experiences or Degree holder in Microbiology, Biotechnology, Life Sciences, Chemistry, Biochemistry with at least 4 years of working experiences.

Technical

• Competent technical skills in the following:
• Good laboratory knowledge and hands-on experience in chemistry testings o Laboratory equipment qualification
• (advantage)
• Knowledge of cGLP & cGMP (advantage)

Business

• Effective report writing skills
• Planning and Organizing skills
• Effective team player
• Analytical skills with logical thinking
• Good interpersonal skills
• Leadership skills (advantage)

Competencies:

• Good command of English
• Good knowledge on usage of computers

Where will I be based?

You will be based at one of our manufacturing site in Singapore near Tuas.

The Career Conversion Programme (CCP) (Train-and-Place with Commitment to Hire) for Advanced Biopharmaceuticals Manufacturing Executives/Professionals is a talent development programme aimed at building the next generation of skilled manpower for Singapore’s Biopharmaceuticals manufacturing industry in anticipation of hiring demand.

The training programme consists of 15 months of local attachment with GSK. Due to the nature of the programme, we can only consider Singapore Citizens and Singapore Permanent Residents. For more information, please visit Career Conversion Programmes (CCP) for Individuals.

Purpose:

• To manage QC equipment life cycle from qualification to decommissioning including calibration and maintenance plan follow up

Key Responsibilities:

• Technical responsibilities
• Manage new QC equipment qualification as per change control and validation processes (i.e. URS, System classification, Audit trail review assessment, DQ/IQ/OQ, PPC09)
• Be author of SOPs/ protocols/ reports/ training materials
• Manage decomissioning of QC equipment and follow disposal
• process
• Maintain our QC asset listing up to date Follow QC equipment routine lifecycle
• Coordination of calibration and maintenance plan with user and external vendor/TS team
• Coordination of equipment troubleshooting if occurence of failure/breakdow (i.e. Tag in/out equipment, Work order creation)
• Sample transfer, alarm management and cleaning for fridges, freezers and incubators
• Liaise with external vendor for service quotation, escort vendor during service and approve invoice timely
• Supports compliance activities:
• Performs regular Ll audits in QC
• Coordinates and supports all L2, L3 and L4 audits and the associated CAPAs
• Lead and manage continuous improvement projects Subject-matter-expert (SME)/ audit fronter for assigned topics
• Manage ad-hoc tasks
• Organization and Management Responsibilities
• Creates strong team morale and a culture of accountability and ownership
• Provides leadership, guidance and technical expertise/support to the juniors
• Ensures continuous improvements of the QC operations
• Ensures expenditures are within budget
• Decision Making
• Proposals & Recommendations
• Based on experience & knowledge of work
• Proposal of CAPA for any issues/ deviations/ exceptions/ risks
• Proposal of QC improvement projects and strategies
• Team training and development

Skills:

Professional

• For Specialist - University Degree in a relevant Science discipline with at least 2 years of working experience or Diploma with at least 5 years of working experience
• For Senior Specialist - University Degree in a relevant Science discipline with at least 4 years of working experience or Diploma with at least 8 years of working experience

Technical

• Competent technical skills in project management
• Computer system validation Knowledge of cGLP & cGMP

Business

• Effective report writing skills
• Planning and Organizing skills
• Good interpersonal and communication skills
• Effective team player
• Analytical skills with logical thinking Problem solving skills

Competencies:

• Effective report writing skills
• Planning and organization skills
• Able to work independently
• Team player
• Analytical skills with logical thinking
• Leadership skills (advantage)
  ​​

Where will I be based?

You will be based at one of our manufacturing site in Singapore near Tuas.

- Mainly in charge of sourcing material, ordering, and delivery item to workplace

- Follow up ordering and delivery status

- Record all purchased materials and ensure everything is tally with purchase record

- Coordinator with supervisor or project in charge person for item request purpose.

- Provide admin duties and clerical supports to project team·Update manpower movement constantly·

Working time:5 working days (9am - 6pm)

Working location: Kranji

Our Client:

• Cranes Lifting Industry
• 5 Days, Office Hours
• West Region
• Up to $4300 Per Month

Responsibilities:

• Investigate all incidents and product nonconformity to identify causes and ways to prevent occurrence in future.
• Support and promote the company incident report and management system.
• Provide guidance to business on consistency of HSE and QMS expertise by participating in Management reviews and audits.
• Monitor company’s ISO 9001 Management System are implemented and maintained in Singapore and Malaysia.
• Control of system documentations and procedures for Southeast Asia including Australia.
• Coordinate with business on training and holding of dialogue sessions with relevant customers, contractors, suppliers to ensure awareness and compliance with all HSE requirement impacting company operations.
• Ensure quality procedures are adhered throughout organisation and highlight noncompliance.
• Conduct quality check and inspection on manufacturing and installation processes pertaining to current range of products.
• Recommend quality control and inspection requirements in consultation with regional HSE and QMS whenever necessary for final review and approval by region director for implementation.
• Participate in HSE committee meetings and implement HSE procedures and standards in all workplace activities to achieve the required safety standard.
• Chair monthly QIP meeting and submit monthly quality report.

Requirements:

• Qualification in Engineering, Safety or Quality.
• Minimum 2 years of working experience in QA/QC in a manufacturing or construction environment.

For interested applicants, please click "Quick Apply”

We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Quay Choon Lan Joanne (Guo Chunlan) | EA Reg No: R24121479
JTE Recruit Pte Ltd | EA Lic No: 14C7215

(EAST REGION) - Paya Lebar MRT

- Stable & Well Known construction industry

- Basic + AWS + VB

Responsibilities:

- Managing company’s project performance, from delivering of operational KPI to liaising with internal Project Managers.

- Prepare quarterly reports for review and clearly present the results and status to various stakeholders on a regular basis.

- Key personnel in maintaining, analysing, and forecasting project cost to project team and management.

- Active involvement in budgeting and forecasting processes; administer and review all project forecasts and actual, explain and correct variances on a monthly basis.

- Liaise with external auditors to conduct statutory audit and interim audit.

- Provide insights into project WIP, collections, risks, opportunities and cashflow.

- Actively reviewing and recommending measures for continuous improvement in project management and reporting processes.

- Present updated financial data and actively attends project management meeting to review cost status.

- Review and provide accurate project payment respond and invoices for payment.

-Any ad-hoc duties as and when required.

Requirements:

- From Construction company & experience in handling cost control for project

- Diploma / degree

- Project cost control for Work in Progress (WIP)

- Liaise with PD & PM

HOW TO APPLY:

Interested applicants, please click on “Apply Now”.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Chris Poh Tze Zheng

EA Personnel Reg No: R24120101

Job Descriptions :

• Leadership and Coordination: Spearhead the delivery of Quality work scopes ensuring seamless coordination among stakeholders and compliance with applicable requirements. You’ll work alongside functions such as Package Mgmt, H&S, Engineering, Construction, Supply & Expediting, Commissioning, Project Controls, Contract Management, Legal, and Procurement.
• Quality Management: Drive project to completion on time, within budget, and to the highest quality and HSE standards. Develop and maintain project Quality schedules, budgets, and forecasts, contributing directly to Company’s Renewable strategy. Ensure compliance to Project Quality requirements are met.
• Design and execute a comprehensive strategy that integrates quality management with sustainability goals to support growth objectives
• Supervise, coach and engage the Quality team to strive for excellence, to deliver solutions that meet high-level quality standards
• Continuously improve customer satisfaction by handling customer complaints promptly and professionally
• Ensure products meet quality standards before reaching customers.
• Oversee all new product development procedures, ensuring that sustainability considerations and internal controls are integrated from the beginning.
• Risk Management: Effectively manage project risks, specifically those intrinsic to the offshore wind industry, manufacturing, Quality Assurance/Quality Control, and supply chain challenges.
• Ensure that the lessons learned are effectively captured and communicated during the project
• Expected to travel to Batam to monitor and control the construction progress and customer meetings.

Job Requirements :

• Bachelor’s degree or higher in Engineering, Mechanical Engineering, or a related field.
• 5-8 years of experience managing quality of Shipyard and installation. Experience in Quality Assurance and Quality Control for onshore / offshore wind projects, preferably specific to Offshore substation construction
• Proven success in quality and process management, with a track record in quality control and continuous improvement.
• In-depth knowledge of Quality Management Practices and standards such as ISO, APQP, PPAP, FMEA, MSA, REACH, ROHS.

• Well Established Medical Devices Manufacturing Company
• Basic $2200 - $3000 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working hours: 12 Hours Shift

Job Responsibilities:

• Carry out inspection of incoming materials and finished products according to operational instructions to ensure that materials or products meet the requirements
• Ensure product identification is correct and stored in the correct location, maintenance of inspection equipment and daily monitoring of production environment
• Statistics on the quality status of incoming materials and processes and the quality of shipped products
• Report abnormalities to superior in timely manner and inform relevant departments and track the improvement status of non-conformities
• Assist in customer complaint analysis and take corresponding improvement measures
• Ensure records comply with good writing practice GDP requirements
• Assist the superior to complete other tasks

Job Requirements:

• At least 1 year of quality management experience and basic computer software
• Blueprint reading capabilities, and ability to use measuring devices like gauges, meters, calipers
• Documentation and reporting skills

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Key Responsibilities

Functional and Automation testing experience including tools such as Selenium, UFT, JIRA, Postman

• Degree in software engineering, computer engineering, electrical engineering or infocomm-related discipline

• Must have professional software quality testing experience with hands-on automation

• Strong understanding of testing techniques, risk analysis

• Strong understanding of test-driven development, continuous integration and continuous delivery

• Experience with automation scripting (i.e. Python and shell scripts)

• Experience with open-source automated testing frameworks (i.e. RobotFramework, Selenium Webdriver)

• Experience with open-source performance testing tools (i.e. JMeter, Gatling, Locust) or enterprise level testing tools (HP LoadRunner)

• Experience with open-source penetration testing tools (ZAP, Burp Suite, SQL Map) or enterprise level penetration testing tools (HP WebInspect, Nessus, CheckMarx)

• Working experience in Agile environment will be an added advantage

• Excellent verbal communication and listening skills

• Proactive, self-driven and motivated

The successful candidate must:

· Responsible for supervision of all site work in cooperation with Project Managers;

· Assist Project Manager in monitoring and managing the day-to-day operations, including site progress, quality, safety, and project cost monitoring;

· Assist to review and develop project schedule with Project Planner for the project detailed construction plan and ensure it complies with customer specifications, engineering deliverables and meet delivery dates;

· Identify any deviations from the agreed scope or premises of the project, assess the impact and ensure remedial action during the construction planning and execution;

· Prepare weekly progress reports inputs and other deliverables of project as required by Project Managers;

· Ensure project quality plan is carried out and in line with audit requirements;

· Assist Project Manager to organise weekly toolbox meeting and housekeeping, respective site operational meetings on related project matters

Requirement:

· At least a Bachelors Degree, preferably in Civil Engineering or related discipline;

· Minimum 5 years relevant local experience in MEP services, E&M systems and Civil and Structural works, preferably in construction industry;

· Able to lead teams and manage effectively;

· Excellent interpersonal and communication skills