Responsibilities:

• Manage the financial & contractual of all projects from pre-tender to post contract phases including quantities, variations, cost estimates, monthly claims, final accounts etc
• Work closely with Project Manager in preparing monthly updated project costing
• Develop suitable subcontract conditions for specific project requirements
• Prepare project budgeting and costing reports
• Responsible in cost estimating, quantity take off, claims preparation, variations and final accounts.
• Review of contracts, prepare tender & contract documentations, tender analyses & reporting, measurement etc
• Review sub-contractors claims and materials on site
• Standardize all agreements (e.g. subcontracts and joint ventures) with alignment to contract policy

Requirements:

• Degree in Building/ Construction Management/ Quantity Surveying or its equivalent.
• Minimum 3 years of relevant experience in construction industry.
• Fresh Graduates with contract management module are welcome to apply
• Strong in arbitration and negotiation skills.
• Good understanding & knowledge of contracts law and its application.
• Preferably well versed in various form of contracts such as PSSCOC, SIA and FIDIC as well as other international form of contracts.
• Preferably conversant in using CostX and/or Glodon Cubicost measurement software.
• Strong communication and presentation skills.
• Only Singaporean

· Perform the duty of Environmental Control Officer in accordance to Environmental Public Health Act

· Maintain ECO registration by NEA

· Full Time ECO - For contract sum exceeding 50 million

· Submission of site environmental control program and site environmental control report

· Attend to all feedback on such irregularities and inform the Occupier immediately

· Inspect the construction site to ensure all facilities and equipment relevant to the maintenance of environmental health are in proper working condition and do not pose any environmental health hazard;

· Point out and discuss environmental health irregularities such as mosquito and fly breeding, rodent infestation, noise/ dust/ smoke/ water pollution, poor housekeeping, earth littering, poor refuse management, poor maintenance of sanitary facilities, etc. with the occupier of the construction site and recommend measures to rectify such irregularities;

· Ensure workplace is in compliance with Workplace Safety and Health Act and its subsidiary regulations that is relevant to its nature of work

· Monitoring of the WSH Management System implementation procedures on site

· Conducting regular site inspections and corrective actions

· To enforce and monitor safety conduct on site

· Carry out investigations and reporting on all incidents, inclusive of accidents, near misses and dangerous occurrences as necessary

· Oversee safe project execution & lead the subcontractors to ensure compliance to all WSH matters

· Liaise closely with project team to provide assistance in any WSH matters

· Recommend the employer of the worksite to implement such reasonably practicable measures to remedy the unsafe condition or unsafe work practice

· Assist in implementation of safety measurement on the worksite

· Identify any unsafe condition in the worksite or unsafe work practice which is carried out in the worksite

· To inspect and report any safety infringement

· Updating & maintaining of all Safety Health & Environmental documentations and legal registers.

Requirements:

· Candidate must be a Registered Environmental Control Officer with National Environmental Agency

· At least 2 years of working experience in related field is required

· Possess Advance Certificate in WSH or Safety Coordinator Training Certificate

· Minimum 2 years of relevant working experience in Building Construction or LTA Projects

· Manage working at Height

· Lifting Supervisor

· Confined Space Safety Assessor

• Establish new and maintaining existing relationships with customers.
• Manage and interpret customer requirements and calculate quotations for clients.
• Perform pre-sales technical assistance and product education.

Requirements:

• Diploma in Electronic, Mechanical/Mechatronics Engineering
• At least 2 years of sales experience in cleanroom environment/semiconductor industry

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Job description

1. Overall cleaning of office premise.

2. Dusting, sweeping/mopping, cleaning offices and meeting rooms, toilets, pantries and other areas that require to be kept clean.

3. Monitor and take stock of pantry and toiletries supplies.

4. To clean waste bins, dispose of all trash and waste items.

5. To carry out any other reasonable duties within the overall function of the job.

Job Requirements:

· Ability to work independently.

· Good attitude and positive mindset.

· Willing to take on ad-hoc duties as assigned by Supervisor.

Other information

Working Location at Bugis

• Maintaining physical and digital personnel records like employment contracts and PTO requests
• Update internal databases with new hire information
• Create and distribute guidelines and FAQ documents about company policies
• Gather payroll data like bank accounts and working days
• Publish and remove job ads
• Schedule job interviews and contact candidates as needed
• Prepare reports and presentations on HR-related metrics like total number of hires by department
• Develop training and onboarding material
• Respond to employees’ questions about benefits (for example, number of vacation days they’re eligible for

Job Description

• Drawings of site plan, cad layouts, elevations and detailed drawings with material specifications and other design documentation
• Presentation drawings and models
• As-built drawings for building projects in compliance with the relevant authorities guidelines
• Performing any other duties as assigned.
• Well versed in construction detailing / building regulations.
• Able to draw in AutoCAD

Requirements

• Diploma in Architectural or equivalent
• 3 years of relevant working experience

Roles & Responsibilities

Requirement

• Recognized Degree by PE board in Civil Engineering, with a minimum of 12 years experience in the Construction industry and 8 year working on LTA projects such as Road, Bridge and Viaduct Projects
• Comprehensive understanding of the contract documents (drawings and specifications), phasing plans, construction sequencing and project schedule
• Strong leadership and supervisory skills
• A team player with good communication skills
• Meticulous and attentive to details
• Excellent communication skills, both written and verbal in English and Mandarin
• Able to prepare reports in Chinese according to standards in China for reporting to HQ in China.

Job Description

• Assist in planning and creating schedules and project timelines.
• Overseeing and directing construction works from conception to completion
• Coordinate and direct workers and subcontractors
• Ensure quality construction standards and the use of proper construction techniques
• Plan ahead to prevent problems and resolve any emerging ones
• Analyze, manage and mitigate risks
• Ensure quality construction standards and the use of proper construction techniques
• Track deliverables, control subcontractors and suppliers to meet schedule, safety and quality objectives.
• Attend all meetings including consultant, technical and subcontractor.
• Planning of housekeeping by coordinating responsibilities of site engineers / site supervisors and sub-contractors.

**To apply, please kindly email your updated resume to [email protected]

We regret that only shortlisted candidates will be notified.


EA Personnel No. R1328116
EA Licence No: 20C0333

Summary: The Credit Control department is responsible for the expeditious collection of revenue from all customers within the credit terms and period. This includes customers paying from Europe, Americas, etc and any other areas which may be allocated to the Credit Controller. The Credit control department also liaise with some Asia agents on collections they make on our behalf. They are also responsible for recording of disputes and following up on the resolution of these disputes.

Reports to: Credit Control Manager

Role and Responsibilities:

• Timely collection of payments;
• Following up on disputes on invoices and queries and ensuring they are attended to promptly;
• Provide prompt updates on customers’ accounts;
• Preparing of Statement of Accounts for customers and reports for agents;
• Submission of payment details in system when payments are credited in the account;
• Report collections forecast;
• Management reporting;
• Working with internal and external parties – Business units, Revenue Process team, Sales & Marketing teams, customers and agents.

Requirements:

Education, Knowledge & Working Experience

• Minimum Diploma in Finance or related field;
• Min 3 years of experience in credit and control function ideally in a shipping environment;
• Knowledge of credit risk analysis;
• Computer literate, excellent in MS Excel.

Personal characteristics

• Good interpersonal and communication skills, spoken and written;
• Able to multitask, prioritize, and manage time efficiently;
• Possesses creative problem-solving and negotiation aptitude;
• Goal-oriented, organized team player;
• Self-motivated and self-directed.

Job description

- Control and manage incoming and outgoing documents (box.com / GS Internal Server / Filing)

(The Authority / Consultant / Subcontractor etc)

- Document number management and assignment

- Submission of documents via EPIC system

- Communication with relevant persons who need to submit documents

- Preparation of Cover Letter for DAR Submission

Job Requirements:

· Min. 1-year experience with Document Controller.

· MS Office

Other information

Working at Changi

To Apply

Please submit your resume in Microsoft Word and indicate the below information:

Current Salary & Expected Salary

Availability to Commence Work

Type of Projects handled.

about the company

My client is a specialised manufacturer serving the machinery/equipment market. They are a Chinese MNC and with their innovating technology, this is a great brand to join at an exicting time in their development. The role needs the candidate to be based permanently in Hanoi, Vietnam

about the job

• Leader of the Quality Department
• Work with a cross-functional team to manage quality issues in New Production Introductions (NPI) program, resolving issues in material or process to successfully reach mass production
• Work with Purchasing and Engineering Team to develop local sourcing and manage supplier quality issues
• Establish control plans based on customer requirements and PFMEA for incoming, in process, outgoing and reliability inspection
• Drive the implementation of process control in critical process that will impact product quality
• Initiate activities and programs for continuous improvement on product quality and manufacturing processes
• Manage field returns and complaints

skills & experience required

• Master / Degree in Electrical / Mechanical / Manufacturing Engineering or equivalent
• Minimum 10 years of experience in contract manufacturing / services (EMS) environment
• Prior NPI manufacturing experience will be a plus
• Extensive Experience in supplier & product quality management
• Six sigma certified / lean manufacturing / continuous improvement techniques a plus
• Have good understanding of PPAP, and quality tools like MSA, SPC & FMEA
• Will be based in Hanoi, Vietnam permanently

If you are interested in the position , kindly send your CVs in to yitwei.kwan(@)randstad.com.sg
Please include your availability, expected salary and reason for leaving current job.
We regret that only shortlisted candidates will be contacted
EA: 94C3609 / Reg: R1325913

1. Support the implementation of quality measures for nursing homes, which includes:Planning and organizing engagements with nursing homes to share the purpose and details of the quality measures.

• Presenting (using Tableau) and analysing the data for the quality measures.
• Preparing reports for CCOs and AIC management.
• Addressing questions from CCOs with regards to the quality measures.

2. Support the development of quality measures for other eldercare services, which includes:

• Reviewing local service/regulatory requirements, good practices, international practices to identify potential quality measures for home nursing care and other community-based care services.
• Conducting a preliminary analysis and presenting the findings.
• Liaising with other AIC Divisions to support the team’s quality measurement work.
• Organising meetings with the appointed workgroup, who will deliberate and select the quality measures for the sector.

3. Assist in the implementation of other key quality initiatives such as:

• Facilitating discussions with nursing homes to develop action plans with the aim of improving the safety culture in their organisations.
• Supporting the implementation of a quality assurance programme involving nursing homes and home nursing care providers.

Job Requirements:

• Degree in any discipline with 1 to 3 years of working experience. Entry-level candidates will also be considered
• Experience in data collection, analysis, visualisation and reporting; and knowledge of the community care sector would be an advantage
• Familiarity with analytics and statistical software e.g., Tableau, Stata would be an advantage
• Effective interpersonal, engagement and follow-up skills
• Strong written and verbal communication skills
• Passion for quality and ageing issues
• Resilient and results-oriented

Responsibilities:

• Prepare annual credit reviews and credit assessments on new and existing cases
• Prepare the necessary documents and perform the periodic risk reports
• Perform the periodic risk reports and monitor the submission of annual credit reviews
• Assist in market risk and liquidity risk management
• Reviewing KYC and CDD duties
• Perform ad-hoc assignments assigned by the Bank

Requirements:

• Degree holder with at least 5 years of risk control and monitoring experience in Banks
• Effectively bilingual (to review credit document in both English & Chinese due to Head Office requirement in China)
• Proficient in MS Excel, PowerPoint, and Word
• Only Singaporeans

Please state your availability, currentand expected salary in the resume.

Qualified or interested candidates, please visit our GMP website at

www.gmprecruit.com to apply for this position with GMP Job Code: 23766

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793 | Paris Low | Registration No: R22106109

Roles & Responsibilities

Roles and Responsibility

· Able to read and interpret technical and fabrication drawings

· Able to review Documents (BOM, ITP, Procedures, etc) and Drawings as per specification requirements

· Piping, Steel Structure and raw materials verification and inspection

· Liaises with Vendors on work schedule and activities (Load-Test, NDE, Painting, etc)

· Able to use measuring, technical instrument, including micrometer, weld-gauges etc

· Ensure Welding is performance according to the approved WPS

· Conduct in-line machined, Fit up and visual inspection (with reports) according to require standards, specification, PRINT prior to delivery or customer inspection

· Assist in compilation of Quality documents prior customer acceptance

· Compliance to HSE regulations and requirement at all time.

· Monitor in-progress activities with effective coordination among respective team for updates

· Report to QC Engineer on Work activities and Job status

· Liaises with QC admin on reports and documents status for submission.

· Willing to perform other ad-hoc work scope when assigned

Qualification

· Diploma in engineering, CSWIP 3.1 certificate

· Good knowledge in ISO 9001:2009, ISO45001:2018 requirements

· Minimum 3 years of relevant working experience in offshore platform/ oil and gas industry

· Knowledgeable in reading, understanding engineering drawings and specification requirements

· Understand piping fabrication/installation inspection and testing requirements

· Knowledgeable in welding inspection and quality control system

· Familiar with basic conventional NDT methods

· Computer literate and familiar in using basic Microsoft office programs

· Good/corrected vision

· Good team player and able to work independently

· Good communication and interpersonal skill

· Willing to perform overtime, shift work when required

Core responsibilities:

• Handle and resolve conflicts, feedback and complains pertaining to the project (HDB)

• Plan and launch public relation programs for Home Improvement Program (HIP) such as preparing circulars, letters and notices

• Attend dialogue sessions with the Client, Resident Committees, Citizens’ Consultative Committees, Town Councils and any party as directed by the Board or the Client

• Attend and provide administrative assistance and logistic support in Construction Working Committee meeting, as and when directed by the SO Representative

• Conduct regular visits to residents/tenants affected by the works to gather feedback and keep them posted of work schedule changes and impact

• Conduct regular visits to residents and tenants affected by the works to gather feedback and keep them posted of work schedule changes and impact

• Working closely with all contractors and take proactive measures in mitigating all complaints arising from the construction activities

• Develop positive relationship and maintain good rapport with residents and different stakeholders

• Participate in project's meeting, record minutes of meetings pertaining to the assigned project

• Maintain proper record of all PR cases, correspondences and communication materials

• All other associated co-ordination and submission works and documentations

• Perform administrative and clerical duties

• Ad-hoc duties as assigned

Minimum Educational Qualifications/ Experience Required:

• GCE A ‘Level/Diploma holder

• Good interpersonal and communication skills

• Min 5 Years’ Experience in HDB projects preferred

• Able to multitask, good organizational and time management skills

• A good team player and willing to be stationed at the site office

• Good communication skills (verbal and written)

• PC literate and knowledge in MS Office

• Positive and good working attitude, self-motivated and able to work independently

Core Responsibilities:

• To perform quality assurance functions with regard to the product (jet engine components), process and maintain quality management system while ensuring compliance with all related government agencies, aviation authorities and customers’ requirements and regulations.
• Establish quality procedures and quality control instructions.
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality.
• Perform internal audits to evaluate quality system, products and processes (ISO9001 / AS9100 / NADCAP).
• Perform vendors’ and on-site audits as required.
• Uphold customers’ and regulatory authorities’ requirements.
• To carry-out other QA functions as required.

Qualifications:

• At least 2-3 years’ of relevant experience in Aerospace QA environment.
• Good analytical, communication and interpersonal skills.
• Meticulous attention to details, able to multi-task and commit to job.
• Familiar with ISO9001 / AS9100 Quality Management System requirements.
• Experience in using problem-solving tools including fishbone diagrams, FMEA and 5-whys methodology.
• Able to interact effectively with other functional departments such as Engineering and Production to resolve issues relating to products and processes.
• Familiarity with audit covering special processes including heat treatment, plasma coating, NDT would be a plus
• Experience in metallurgical laboratory evaluations would be advantageous

Education Requirements:

• Degree / Diploma in Mechanical / Aeronautical Engineering

Main Job Description

• Supervising, coordinating and scheduling the daily activities of construction trades-people
• Establishing methods to meet work schedules and coordinating work activities with other departments/subcontractors/supervisors/managers
• Training or arranging for the training of workers in job duties, safety procedures and company policies.
• Ensuring standards for safe working conditions are observed
• Continuously review and improve the production & warehouse area housekeeping, ensuring that it is always, well-maintained, organized and clean.
• Ensure a safe and healthy work environment in Production area
• Lead improvement projects and housekeeping.
• Manage operators performance and retention.
• Follow all safety protocols
• Coorperate fully with company staff

Requirement

• Min 1 year relevant working experience in construction industry
• Certificate in Building Construction Safety Supervisor Course
• Able to work under pressure and fast track environment
• Excellent team player and good interpersonal skills.
• Hardworking and good working attitude
• Location: Gul Circle

Job Description

• Review requested items for requisition and liaise with supervisors to determine the suitability of the material as well as identify and / or track overdue material requests.
• Prepares purchase orders by verifying specifications and price; obtaining recommendations from suppliers for substitute items; obtaining approval from requisitioning department.
• Familiar with construction material and specification.
• Monitoring and preparation of purchasing related reports.
• Communicate and negotiate with vendors and suppliers.
• Maintain and update supplier information such as track record, experience, product lines etc.
• Maintain records of all purchases, pricing and other important data

Requirements

• Minimum 2 years as Purchaser or related position
• Proficient in Microsoft Office Suite (Word, Excel etc.)
• Excellent in verbal and written communication skills
• Ability to multitask, prioritize and manage time efficiently

Element has an opportunity for an Engineer to join our rapidly expanding team. As a member of the operations team, the Engineer position performs a variety of routine and non-routine testing assignments within the department assigned and insures timely and accurate test results under minimal direct supervision.

The role is based in Ang Mo Kio, Singapore.

Job Duties:

• Perform Calibration and Measurement of Dimension gauges and instruments as per WI using CMM, reference master, tester etc (on-site and in-house) with report and necessary administrative work
• Conduct routine maintenance and calibration of lab equipment as schedule and assigned
• Ensure proer delivery of service to customer(s)
• Help manager to manage day-to-day calibration work in the labs reference to ISO17025 standard, eg. Quality/ Job Planning/ Job Assignment/ Customer Requirements etc
• Any other duties as assigned by Manager/ Section Head/ Senior staff

Job Requirements:

• Diploma/ Degree in Aerospace/ Precision or Mechanical Engineering
• 3 years or more experience in Calibration and Measurement of Dimension is preferred
• Working knowledge of laboratory safety
• Possesses a demonstrated ability to apply academic knowledge within the context of Element’s business
• Can analyze and compiles testing data from the tests performed
• Possess strong computer skills

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

My client a well established Pharma company is looking out for a competent QA Associate, this following are the requirements:

Responsibilities

• Contract/External Manufacturer Quality Oversight: Monitor quality aspects of contract manufacturers, including handling OOS/NCR/Deviation and CAPA, Change Control, and routine stability testing. Ensure compliance with GMP and relevant standards, meeting timelines for actions.
• Releases of products : Oversee batch release to prevent recalls or critical quality issues in the market.
• Change Control: Address individual change controls promptly and efficiently. Manage the change control process, ensuring compliance with GMP and company SOPs. Execute change control tasks within defined timeframes.
• Artwork Review: Conduct artwork reviews to meet requirements.
• Manage deviations, NCR, CAPA: Prevent recalls or critical quality issues related to due diligence.
• Customer Complaints: Collaborate with internal departments and suppliers to oversee the complaints process.
• Document Management:Update SOPs/WIs/FGS as per role responsibilities.
• Internal and External Auditing: Conduct and faciliate resolution audits within specified timeframes, adhering to regulations and SOP and follow up on NCR/CAPA outcomes.

Key Requirements

• Possesses BSc in chemistry, pharmacy, or related field.
• 1 to 3 years of QA experience in pharmaceutical/medical device industry
• Strong familiarity with Good Manufacturing Practice (GMP) and Good Distribution Practice (GDP)
• Experience in supply chain quality, manufacturing quality, or quality management in commercial settings.
• Proficient in deviation management, CAPA, change control, and documentation within pharmaceutical/medical device sectors.
• Auditing experience is desirable.
• High level of attention to details

How to Apply:

Interested applicants may apply by sending in your updated résumé (in MS Word format) to my email or apply directly:

Consultant: Tan Jun Jie

EA personnel reg. no.R1878852

EA License No. 17C8502

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Control (Software) Design Engineer / Automation Engineer
• Working Location: Pioneer (Close to Joo Koon MRT)
• Working Hours: 5 days (Mon – Fri, 8.30 am – 6.00 pm)
• Salary Package: Up to $4,000 + AWS + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Project Management including scheduling, Budget control & other project-related matters
• Responsible for hardware and software (PLC) design for customized machine / total system
• To supervise, test and commission projects both in Singapore and/or overseas
• Project presentation & documentation
• To work with third-party engagement wherever necessary for project-related matters

APPLY NOW!!!

• Diploma / Degree
• Min 5 years of relevant experience
• Proficient in PLC programming is compulsory

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65637 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Job Description

• Industry/ Organization Type: Manufacturing/ Prefabricated Steel
• Position Title: Assistant Quality Engineer
• Working Location: Jurong West
• Working Hours: 5 days, Mon - Fri (8 am – 5 pm)
• Salary Package: Basic Salary Up to $3,500 + AWS + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Conduct internal audits and supplier audits to evaluate compliance with quality standards.
• Participate in product and certification audits.
• Assist in the establishment and maintenance of procedures, work instructions, and document control.
• Analyze test reports and collaborate with relevant teams to identify areas for improvement.
• Address potential quality issues and work with cross-functional team members to implement follow-up actions.
• Collaborate with the relevant team to investigate root causes, develop Corrective and Preventive Actions for non-conformance or procedural failures.
• Support the preparation of Quality Assurance/Quality Control (QA/QC) plans.
• Formulate QC checklists, inspections, and procedures related to QA/QC.
• Compile monthly reports to track quality and compliance performance.
• Maintain documentation related to certifications.
• Assist the QA/QC department in areas of Health, Safety, and Environment (HSE) by participating in hazard assessments, incident investigations, and risk assessments when necessary.
• To support and engage in other activities or new project development as and when required

APPLY NOW!!!

• Min Diploma in Engineering or other relevant fields
• More than 2 years' experience in QA/QC and audits
• Independent and self-motivated

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65806 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Work Scope:

1. Apply and cancel Work Permit for Foreign Worker

2. Arrange and process Foreign Worker to come Singapore and left Singapore

3. Handle and process Dormitory matters

4.Handle Worker Training and related Matters

5.Update worker time card and calculate Worker Working hours

6.Update and maintain Worker individul folder (permit copy,passport copy,training certificate copy etc,)

7.Update and maintain worker master excel list

8.Handle Worker medical matters and accident matters

9.Handle Renewal related matters (Renew permit ,passport ,training etc,

10. Contact with Site manager to Arrange worker attend Site training matters.

11.Other admin job

Working Time: Monday -Friday 9:00am-6:00pm ;Saturday 9:00am-1:00pm

Salary :SGD3200-SGD4500 Depending on experience and skills , need work independly

Email: [email protected]

Key Responsibilities and Accountabilities :

• To manage and supervise site activities on the project with the objective of meeting the schedule, quality, and safety objectives.
• To manage and oversee the civil and recovered materials work in order to ensure the Project Safety, environmental, quality and Programme objectives are satisfied.
• To monitor materials on site in order to ensure that the appropriate material is available to meet the construction program.
• To ensure all works are carried out in line with LTA health and safety standards in order to provide high quality works in safe and efficient manner.

Requirements :

• Minimum Diploma in Civil Engineering or equivalent preferred.
• Minimum 5 years experience in site supervision field
• Have initiative and willingness to learn
• Able to work with minimal supervision
• Good communication skills

For RC subcontractor

Job Responsibilities

• Taking off quantities, sourcing sub-contractors & suppliers, pricing and preparation of tender submission
• Evaluation of price comparison and costing summary
• Project administration and documentation include preparation of interim valuations, pricing and agreement of contract variations, update claim submissions, preparation of final accounts
• Carry out site measurement
• Evaluation and certification of sub-contractors progress payments
• Other quantity surveying related duties

JOB REQUIREMENTS

• Diploma/Degree Holders in Quantity SurveyingInstitution/University
• Minimum 3 years working experience in building construction
• Knowledge of building condition of contract
• Perfer to Structure or Archi trade
• Proficient in Microsoft Office
• konwledge in Mandrain languages to handle queries and feedbacks to associates, site team and customers.

• Establish new and maintaining existing relationships with customers.
• Manage and interpret customer requirements and calculate quotations for clients.
• Perform pre-sales technical assistance and product education.

Requirements:

• Diploma in Electronic, Mechanical/Mechatronics Engineering
• At least 2 years of sales experience in cleanroom environment/semiconductor industry

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740