Our client is a global leader in gateway services, who is seeking to recruit a Trainee Air Hub Lead - Load Control (Location: East). This position is based in Singapore.

Trainee Air Hub Lead - Load Control (Location: East)

Responsibilities:

You will perform Weight & Balance responsibilities for departing flights from Changi International Airport as well as departing flights from other international airports around the globe. Your essential roles are to ensure that the structural weights of an aircraft are within its safety parameters and that each departing flight is in "trim" and balanced within the centre of gravity. You will also be responsible for the completion of the Loadsheet and its related Weight and Balance documentation in accordance to IATA rules and regulations, handling pre-load calculations, load distribution and planning, timely issuance of loading instructions, and timely presentation of loadsheets to pilots before flight departures.

Requirements:

• Diploma in any discipline

• Able to read, write and communicate in English

• Comfortable with shift work

Others:

• Work Week & Shift: 6 days, rotating shift

• Staff transport will be provided for candidates working beyond midnight.

JJ Consulting Services

EA Licence No.: 12C6207

Applicants are invited to send in a MS Word resume to [email protected] stating position applying for/present/expected salaries and earliest available date.

We thank all applicants in advance and regret that only short listed candidates will be notified.

• Planning, design, assembling and installing equipment and facilities.
• Coordinate and liaise with main con, consultants, sub-contractors.
• Supervise and check subcontractors’ works according to design drawings, specifications and regulation.
• Plan and prepare projects based on stage of activities, schedule work activities.
• Reporting to electrical engineer if discrepancies in safety measures or installation procedures are found and take steps to solve the problem.
• Check and ensure the equipment and material offered in compliance with the specification and drawings.
• Oversee and be overall responsible for works carried out by supervisors assigned under his/her care.
• Generate incident reports
• Perform all other duties as assigned and required.

Job Description:

· To assist Safety Manager on all safety, health, environmental, and welfare matters, to ensure the Project complies with its statutory obligations and safety requirements.

· To ensure the implementation and monitoring of appropriate safety measures in accordance with the Workplace Health and Safety Act.

· To assist Safety Manager in liaising and co-ordinate with stakeholders, and other Consultants employed by Developer.

· To attend Main contractor’s daily toolbox briefings, conduct regular site safety inspections, and prepare report of observation and follow up on the rectification.

· To highlight areas where training/certification is required to meet the standards imposed by Legislation, Approved Codes of Practice, or H.S.E. guidance.

· To familiarize with the risks and control measures related to each work activity.

· To carry out investigations into all accidents and near-miss incidents and to record the findings on the relevant forms.

Requirement:

· At least 5 years of relevant experience in construction industry preferably 3 years with developer/main contractor

· Must be a registered Workplace Safety and Health Officer with MOM and have been practicing as WSHO for at least 5 years

· Has developed a Risk Management Implementation Plan (bizSAFE Level 2) or equivalent

· Good communication skills and team player

· Must be able to clear any internal security checks conducted by the Singapore Government

· Class 3 Qualified Driving License

Job Description & Requirements

• Responsible for the implementation and monitoring of Workplace Safety & Health and Environment Management Systems at work sites.
• Conduct regular WSH inspections and follow-up actions to ensure safety compliance
• Ensure all Health & Safety policies, procedures, rules and regulations are adhered to and are regularly reviewed, updated and communicated.
• Ensure the Company meets its statutory obligations in all areas pertaining to health, safety and welfare at work, including statutory training and reporting
• Ensure the completion and regular review of risk assessments for all work equipments and operations
• Ensure all accidents are documented, investigated and recommended improvements implemented.
• Coordinate the development of health & safety policies, systems of work and procedures.
• Inspect project sites to ensure safety measure are being carried out at all times

Requirements:

• Possess relevant safety certificates (Eg Advanced Certificate in WSH, Safety Officer's Course or equivalent)
• Minimum 5 years of relevant working experience in Building Construction
• Familiar with ISO45001, ISO 9001 & ISO 14001

Job Description & Requirements

• Responsible for the implementation and monitoring of Workplace Safety & Health and Environment Management Systems at work sites.
• Conduct regular WSH inspections and follow-up actions to ensure safety compliance
• Ensure all Health & Safety policies, procedures, rules and regulations are adhered to and are regularly reviewed, updated and communicated.
• Ensure the Company meets its statutory obligations in all areas pertaining to health, safety and welfare at work, including statutory training and reporting
• Ensure the completion and regular review of risk assessments for all work equipments and operations
• Ensure all accidents are documented, investigated and recommended improvements implemented.
• Coordinate the development of health & safety policies, systems of work and procedures.
• Inspect project sites to ensure safety measure are being carried out at all times

Requirements:

• Possess relevant safety certificates (Eg Advanced Certificate in WSH, Safety Officer's Course or equivalent)
• Minimum 3 years of relevant working experience in Building Construction
• Familiar with ISO45001, ISO 9001 & ISO 14001

Join us at Mastermark!

Mastermark is a leading bird control and wildlife specialist. We provide bird control solutions, animal rescue and management, along with wildlife consulting services locally and overseas.

What you will do:

• Learn about the intricacies and be well versed with the technicalities of bird control
• Bird proofing of buildings and premises, both commercial and residential
• Installation of bird netting and bird spikes
• Work at heights from an elevated work platform or high floors

Our ideal person should have:

• Class 3 driving license required
• Love and enthusiasm for birds and wildlife
• Be physically fit and able to work at heights for long periods
• Relevant technical skills (handy with hand tools and power drills)
• A good team player
• Work at Heights/MEWP certification will be an added advantage
• Singaporean/PR

Benefits:

• Annual Leave
• Medical
• Dental

Compensation for this position will be competitive and will reflect your years of relevant experience and expertise.

If this sounds like a career path you'd want to partake, please apply! Shortlisted applicants will be contacted via phone call/ WhatsApp within 14 days.

-Familiar with usage of commonly-used QC testing / measuring instrument

-Organised, methodical, meticulous, pro-active

-Visual Inspection

-Able to follow through with colleagues and vendors in a firm manner to ensure quality requirements are upheld and faults rectified

-Responsible, team player, able to communicate and integrate

-Adhoc duties may be assigned

-Perform product inspections, in-process inspections, and Final inspections prior to delivery

-Prepare QC reports

-Communicate in-house and with vendors and products faults, and follow up to ensure rectification

-Familiar with usage of commonly-used QC testing / measuring instrument

-Organised, methodical, meticulous, pro-active

-Visual Inspection

-Able to follow through with colleagues and vendors in a firm manner to ensure quality requirements are upheld and faults rectified

-Responsible, team player, able to communicate and integrate

-Adhoc duties may be assigned

-Perform product inspections, in-process inspections, and Final inspections prior to delivery

-Prepare QC reports

-Communicate in-house and with vendors and products faults, and follow up to ensure rectification

-Familiar with usage of commonly-used QC testing / measuring instrument

-Organised, methodical, meticulous, pro-active

-Visual Inspection

-Able to follow through with colleagues and vendors in a firm manner to ensure quality requirements are upheld and faults rectified

-Responsible, team player, able to communicate and integrate

-Adhoc duties may be assigned

-Perform product inspections, in-process inspections, and Final inspections prior to delivery

-Prepare QC reports

-Communicate in-house and with vendors and products faults, and follow up to ensure rectification

Roles & Responsibilities

• Provide technical advice and support for daily operational issues.
• Perform inspections of welding, structural fabrication, and piping systems to ensure compliance with industry standards.
• Review piping isometric drawings and verify that materials meet specifications.
• Coordinate and oversee NDT activities, including radiographic testing (RT), and ensure accurate results through proper witnessing and review.
• Conduct thorough inspections and assessments during plant shutdowns, documenting findings and reporting discrepancies.
• Assist in the development and implementation of quality control procedures.
• Participate in safety meetings and ensure compliance with health and safety regulations.
• Maintain accurate and organized records of inspections, reports, and certifications.
• Collaborate with engineering and construction teams to ensure design specifications are met.

Qualifications:

• Minimum of 3 years of experience in plant inspections or related fields, especially during shutdowns.
• Valid certification in at least one API area (API 510, API 570, or API 653).
• Knowledge and experience in welding inspection, structural fabrication, and piping materials.
• Proficient in MS Office and CAD/CAM software.
• Familiarity with industry standards and codes (e.g., ASME, ASTM).
• Experience with non-destructive testing methods (UT, PT, MT, VT) is a plus.
• Strong communication skills, both written and verbal, for effective collaboration with team members and clients.
• Ability to work in a fast-paced environment and manage multiple priorities.

Job Description

a) Report to the Project Manager. Responsible for the EHS systems and implementations.

b) The detailed duties and responsibilities includes but not limited to the following:

• Assist and advise the Project Manager on EHS planning for overall project scope and detailed activities.
• Study and fully understand the requirements of company ISO, EHS and sub-contracts agreements.
• Liaise, handle and keep proper records in dealing with all related authorities in complying with their respective requirements.
• Conduct regular site audits to ensure compliance with EHS requirements. He is authorized to take necessary actions including issuance of partial stop work order as he and the Project Manager deem fit.
• Handle all accident and incident reports.
• Work as a team with project team members and sub-contractors to provide a safe working environment.
• Prevention of fines, imposition of demerit points and SWO from the authorities or owners like MOM, NEA and HDB is a key role which is also a key performance measurement of WSHO cum ECO.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Certified NEA, ECO, ECO, ECMO
• At least 3-5 years' on-site experience

Job Description:

• Competent in reading and understanding drawings and perform measurements.
• Competent in preparing Bills of Quantities.
• Competent in understanding tender/contract/document/specifications/terms of contract
• Competent in analysing quotations/prices/rates, build-up rates and perform pricing
• Competent in performing contract administration including but not limiting to valuation of payments and variations claims in accordance to contract requirements
• Competent in performing all tender activities necessary for the procurement of new projects
• Competent in performing any other activities in connection with the businesses of the holding company
• Competent in working independently as well as with a team
• Participate in any activity ancillary to the company's other objectives e.g. charity events
• Competent in completing required obligations within stipulated timings and other constraints

Job Requirements:

• Bachelor's Degree in Quantity Surveying
• Minimum 3 years of working experience, preferably in the construction industry
• Proficient in Microsoft Office Tools

The candidate should have the following criteria:-

1. Prepare bar bending schedule;

2. Manage reinforcement bar workers effectively;

3. Liaise with main contractor and site consultants;

4. Minimum 5 years of rebar foreman experience in Singapore;

5. Site base working location;

6. Working hours: 8am to 7pm, overtime works may upon work progress;

Responsibilities:

• To assist the Project Manager on project site work by focusing mainly on the aspects of construction, safety quality management, and project coordination of projects and maintenance works and to ensure smooth work progression and completion within target time and budget.
• Prepare method statements, design plans, and specifications.
• Liaise with the stakeholders (e.g. clients, authorities, consultants) on permits, drawings, and design matters.
• Develop projected milestone and operational plans for different phases of the project which includes scheduling, monitoring and reviewing of the work of others.
• Determine project requirements and estimate resources such as manpower, materials and equipment.
• Ensure that site works are executed accordingly based on approved detailed drawings, interpreted plans, and requirements of relevant authorities.
• Ensure project meets dateline/schedule, safety & quality standards of client’s requirements. Support contract administration and construction inspection by reviewing final plans, specifications, special conditions, and agreements.
• Other job duties as assigned.

Requirements:

• Candidate must possess at least a Professional Certificate/NiTEC, Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Others), Engineering (Environmental/Health/Safety), or equivalent.
• At least 3 year(s) of working experience in the related field is required for this position.
• Specializing in Engineering - Civil/Construction/Structural or equivalent.
• Familiar with Civil, Archi & Steel Structural Works
• Experience in process plants handling both consultants with client will be added advantage

Job Description

• Review and interpret all relevant drawings, specifications and reports;
• Handle full scope of Quantity Surveyor duties which includes material take-off and variations i.e. Structural works; Piping works; Electrical and Instrumental works; Mechanical and Equipment works; Painting works
• Able to understand the Project contract documents and inform and assist site team for the cost estimate for any additional works
• Prepare the commercial tenders, including material take-off, preparation of BQs and technical queries
• Analyse tender pricing and prepare contractors’ bill of quantities
• Manage all related stakeholder liaison activities with a range of interested parties i.e. contractors, subcontractors, consultants and authorities on the project including but not limited to Contracts & Legal Department, Engineering Department and External Consultants;
• Prepare monthly progress claims to client
• Manage subcontractor and vendor claims
• Manage project timeline and cost

Requirements

• Candidate must possess at least a Bachelor’s degree or equivalent in Quantity Survey, Engineering (Mechanical/Civil).
• Minimum 3 years of relevant working experience in the oil and gas industry and familiar with EPC projects
• Meticulous, analytical, eye for details and a good team player
• Ability to multi-task in a fast paced and dynamic environment
• Prior experience in leading a Quantity Surveyor team will be advantageous and can be considered for a senior role.
• Able to commence on short notice will be preferred

RESPONSIBILITY
· Plan and allocate tools, material and manpower for fabrication;
· Ensure that all the technical reviews by engineering team comply with project requirements;
· Coordinate all technical queries with related parties – engineering team, client, vendor etc;
· Assist Project Manager in streamlining work processes;
· Coordinator with team to review all subcontract and supplier shop drawing, product data, samples,
manuals etc for all compliance with contract documents;
· Manage vendor documents for all equipment;
· Monitor and ensure all the vendor equipment delivery are on time, including checks on inspection status and requirement;
· Prepare tender submission, cost estimation and project change request;

*Prepare monthly P&L reporting.

*Able to use AutoCAD – Advance Steel Software.
· Any other duties as assigned.

Please note that duties of the Employee may change and develop over time.

REQUIREMENTS

· Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Mechanical) or equivalent

· Proficient in design software such as PV AutoCAD

· Proficiency in English language (spoken and written) with strong communication skills

Responsibilities:

· Reporting to Managing Director

· Prepare, schedule, coordinate and monitor the assigned project

· Perform overall quality control of the work (budget, claims, schedule, plans, personnel’s performance) and report regularly on project status.

· Ensure that works complies with standards, regulations, and safety guidelines.

· Liaise with Consultant on technical issues & assist in Site inspections and coordination.

· Coordinate the handing over of completed works and completion of the necessary rectification works.

Requirements:

· Degree in Civil Engineering (Recognized Degree by PE Board)

· Proven working experience preferably in civil works

· Decision making ability and leadership skills

· Excellent organizational and communication skills

· Attention to detail and problem-solving skills

· Proficient in MS Office, AutoCAD and Project management software

· Relevant training and/or certifications

• Manage, design, develop, create and maintain small-scale through to large-scale construction projects in a safe, timely and sustainable manner.

• Conduct on site investigations and analyze data (maps, reports, tests, drawings and other).

• Carry out technical and feasibility studies and draw up blueprints that satisfy technical specifications.

• Assess potential risks, materials and costs.

• Provide advice and resolve creatively any emerging problems/deficiencies.

• Oversee and mentor staff and liaise with a variety of stakeholders.

• Handle over the resulting structures and services for use.

• Monitor progress and compile reports in project status.

• Manage budget and purchase equipment/materials.

• Comply with guidelines and regulations including permits, safety etc and deliver technical files and other technical documentation as required.

• Working with a team of fellow engineers and construction crews to organize and complete projects.

Key Responsibilities:

• Website Management: Maintain, update, and enhance the company website to ensure optimal functionality, user engagement, and compliance with best practices.
• Server Administration: Oversee the administration, configuration, and maintenance of company servers, ensuring high availability and performance.
• Email Management: Monitor, configure, and troubleshoot company email systems, ensuring seamless communication for all employees.
• Technical Support: Provide timely technical support to employees regarding computers, software applications, and other IT issues.
• Hardware and Software Installation: Assist with the installation, configuration, and maintenance of computer hardware and software.
• Data Security: Ensure data security and integrity through the implementation of backup procedures and security protocols.
• Documentation: Maintain accurate documentation of IT processes, configurations, and user guides for reference.
• Training: Assist in training staff on IT-related policies and best practices.

Qualifications:

• Bachelor’s degree in Computer Science, Information Technology, or a related field (preferred).
• Proven experience in website management and IT support.
• Strong understanding of computer systems, networks, and software applications.
• Excellent problem-solving skills and attention to detail.
• Strong communication skills and the ability to assist non-technical staff.

Job Description:

• Plan and schedule work sequences for construction operation
• To study tender / construction drawings, specifications and contracts to understand project requirements
• Liaise with consultants, client & main / sub-contractors and coordinate for site activities arrangement
• Perform site inspection and ensure that the work are carried out based on the project specification and construction drawing / final approved drawing from authorities

Job Requirements:

• Candidate must possesses Bachelor's Degree in Civil Engineering

Job Description:

• Plan and schedule work sequences for construction operation
• To study tender / construction drawings, specifications and contracts to understand project requirements
• Liaise with consultants, client & main / sub-contractors and coordinate for site activities arrangement
• Perform site inspection and ensure that the work are carried out based on the project specification and construction drawing / final approved drawing from authorities

Job Requirements:

• Candidate must possesses Bachelor's Degree in Civil Engineering

Senior Project/Site Engineer is responsible for assisting the Project Manager on the progress of the projects/site works and manpower related aspects of the project. They are to oversee drawing management and make sure the updated drawings to the clients and subcontractor are issued.

Job Responsibilities:

• Plan and schedule work sequences for construction operation
• To study tender / construction drawings, specifications and contracts to understand project requirements
• Liaise with consultants, client & main / sub-contractors and coordinate for site activities arrangement
• Perform site inspection and ensure that the work are carried out based on the project specification and construction drawing / final approved drawing from authorities
• Lead a team of supervisors / foreman for works coordination with main/sub-contractors and/or authorities and/or consultant on project progress and technical issues
• Assist in preparation of method statement and construction sequence for project implementation
• Assist project manager in Project Costing, monthly progress claims and monthly progress report
• Support Quantity Surveyor (QS) in verifying progress payments and claims
• Coordinating the handing-over of completed works to the client and completion of the necessary rectification works

Job Requirements:

• Candidate must possesses Bachelor's Degree in Civil Engineering
• Minimum 3-6 years of relevant working experience

Cleaning Supervisor

• Supervise ad-hoc cleaning and ensure timely completion and meet our quality standard

• Attend 1st session visit at new customers with assigned staff

• Manage inventory of cleaning tools and products

• Manage all local & HSS staff schedules, including attendance

Operation and others:

• Create new and updated customers’ data

• Generate monthly sales invoices (Note: All invoices are to be sent out by the end of each month).

• Manage customers including following up to maintain timely payments

• Prepare and submit all staffs’ wages

• Attend to new sales inquiries till the duel closed

• Sending marketing emails to offices, agents, MA, etc. to create awareness of our services

• Manage new online booking apps, when on board

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

- Diploma/Bachelor's degree in Mechanical Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Have experience with HDB projects

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,