Job description

· Review the safety management system and offer suggestions for enhancement.

· Implement and oversee the ECM Plan as per requirement.

· Collaborate closely to monitor earth control activities at different stages of the project.

· Manage on-site safety audits.

· Investigate incidents/accidents and propose corrective actions to prevent recurrence.

· Ensure staffs adhere to statutory acts, regulations, company safety protocols, and industry codes.

· Demonstrate effective communication abilities to interact with colleagues, clients, and governmental bodies.

· Perform any other ad-hoc duties as assigned.

Requirements

· Diploma in Workplace Safety & Health or equivalent

· Registered WSHO with ECO and ECMO

1. Primary Responsibilities

• Quality Planning & Documentation: Develop, implement, and maintain a project-specific Quality Assurance (QA) and Quality Control (QC) plan that aligns with BCA CONQUAS standards, ensuring all quality processes meet assessment criteria.
• CONQUAS Compliance Monitoring: Monitor construction activities to meet CONQUAS requirements, ensuring each component (structural, architectural, and M&E works) adheres to the system’s quality benchmarks and detailed criteria.
• Material Inspection & Testing: Oversee the inspection and testing of materials used on-site, ensuring conformity with BCA-approved materials and standards under CONQUAS. This includes managing third-party testing agencies when required.
• Site Audits & Inspections: Conduct frequent site inspections and audits focused on CONQUAS criteria, including workmanship, material application, and defect minimization in structural, architectural, and M&E works.
• Non-Conformance Management (NCR): Identify, document, and address non-conformances, particularly those impacting CONQUAS scoring. Recommend corrective actions, ensuring rectifications align with quality standards to avoid future issues.

2. Collaboration with Project Team

• Coordination with Site Engineers & Supervisors: Work closely with site engineers and supervisors to ensure construction methods comply with CONQUAS specifications, providing guidance on quality protocols and rectifications as needed.
• Client & Consultant Interaction: Act as the primary quality liaison with clients and consultants, updating them on QA/QC matters and addressing quality concerns directly related to CONQUAS scoring.

3. Reporting & Documentation

• Quality & CONQUAS Reports: Prepare quality and assessment reports, including checklists and summaries that reflect compliance with CONQUAS scoring standards, inspection records, and non-conformance resolutions.
• Record Management: Maintain comprehensive QA/QC records, including BCA CONQUAS documentation, material certificates, inspection logs, and testing results.

4. Technical Skills and Knowledge

• CONQUAS Standards & Guidelines: In-depth knowledge of BCA’s CONQUAS standards, especially in structural, architectural, and M&E works criteria, assessment scoring, and inspection guidelines.
• Inspection Techniques & Tools: Proficiency in inspection techniques and tools that align with CONQUAS criteria, including non-destructive testing (NDT) and visual inspection practices.

5. Training & Development

• CONQUAS Training for Team: Train the construction team on CONQUAS requirements, quality assessment protocols, and best practices to enhance work quality and scoring.
• Continuous Improvement: Promote continuous quality improvement initiatives that reflect CONQUAS requirements, addressing observed quality gaps with updates to procedures.

6. Qualifications

• Education: Diploma/ bachelor’s degree in civil engineering, construction management, or related field
• Experience: 3-5 years of experience in a QA/QC role within the construction industry, with added experience in managing Quality Marks assessment processes or certifications a significant advantage
• Certifications: BCA-Approved CONQUAS training or relevant quality certification such as ISO 9001:2015 in Quality Management Systems.
• Skills: Strong analytical skills, attention to detail, and the ability to assess and improve quality standards.

7. Key Competencies

• Attention to Detail: Strong focus on details in line with CONQUAS quality metrics for structure, architecture, and M&E works.
• Communication Skills: Ability to clearly communicate quality standards, updates, and CONQUAS requirements to all team members and stakeholders.
• Problem Solving & Decision-Making: Effective in resolving quality issues that may affect CONQUAS scoring, ensuring timely solutions.
• Adaptability: Ability to adjust processes to meet dynamic project needs while adhering to CONQUAS standards.

Accounts Executive

Hexacon Construction is seeking an accounts executive immediately.

What’s on offer

This is a permanent role based at Balestier Road.

· SGD 2,600 - $3,700 monthly, depending on experience and qualifications

· 5-day work week

· 14 days annual leave

· 3 months probation

Reporting to the Finance Controller and Senior Accountant, you are responsible for:

· Maintain accounting general ledgers within accounting software and on Excel

· Perform general ledger, bank, supplier statement reconciliation

· Assist in preparing monthly management accounts, quarterly GST Form 5

· Assist with auditor and tax agent queries, providing of relevant information

· Accurate data entry into claims submission, supplier and payment processing

· Other ad-hoc duties

The successful candidate should:

· Degree / diploma in accountancy

· Ideally, 1-3 years of accounting experience. However, fresh degree / diploma graduates are still welcome to apply

· Meticulous, with an eye for detail

· Spoken and written English proficiency

· Candidates with prior experience with IFCA accounting software will have a significant advantage, but not a must

· Live within the Balestier / Toa Payoh / Bishan area

Job Description:

• Manage the recruitment process for construction staff (e.g., engineers, coordinators, managers) and site workers.
• Utilize job portals, recruitment agencies, and social media platforms to identify potential candidates.
• Conduct initial resume screenings and shortlist candidates for interviews with hiring managers.
• Schedule interviews with candidates and assist in the interview process.
• Support in making job offers and negotiating terms with selected candidates.
• Maintain and update recruitment records, including interview outcomes and new joiner documentation.
• Oversee the onboarding process for new joiners, including briefing them on administrative details and benefits.
• Organizing recruitment campaigns, job fairs and other events to attract candidates.
• Handle processes related to work pass applications and statutory requirements for housing, medical etc.

Requirements:

• Diploma/Degree in Human Resources, Business Administration, or a related field.
• 1-2 years of experience in recruitment, preferably within the construction industry.
• Strong understanding of recruitment processes for both construction staff and workers.
• Knowledge of local employment laws, work permits, and foreign worker regulations.
• Excellent organizational, communication, and interpersonal skills.
• Proficiency in Microsoft Office.

Job Description

• Lead and guide sub-contractor to achieve quality workmanship
• Handle paperworks , defects issuance and reporting
• Conduct defects investigation and identification

Requirement

• Minimum 4 years in CONQUAS
• Possess at least 2 good industry practices certificates
• Microsoft office knowledge
• Able to communicate with client and consultant

Job Description

· Control and manage incoming and outgoing documents

· Responsible for full inventory of documentation & its easy retrieval

· Review and maintain the accuracy of records, updating where necessary to ensure they are up to date.

· Communication with relevant persons who need to submit documents

· Coordinate with project team to ensure compliance of all documentation

Skills / Qualifications

· Candidate must possess at least a Nitec in Business Studies / Engineering preferred

· At least 1 year of relevant experience in a construction company.

· Detail-oriented and organised

· Highly motivated, well organized, resourceful and proactive

· Possess good interpersonal skills with sound written and oral communication skills

• Project lead experience in actual projects
• Facilitating BIM Coordination meeting
• Planning BIM processes
• BIM Legal and Contractual issues
• Organisation's adoption plan

Job requirement

• BIM quality check
• BIM authoring tool
• BIM design review
• BIM analysis tool
• BIM Coordination tool
• Project workspace
• BCAA specialist diploma

Job Description:

• Managing the design and coordination of a team of M&E coordinators, Engineers, and BIM modellers.
• Liase with consultants on matters relating to all M&E works.
• Participate in technical meetings and site meetings.
• To assess and resolve any technical or site issues related to M&E drawings and M&E work with consultants and subcontractors
• On-site supervision of work progress
• Maintaining schedules and coordinating the work of subcontractors.
• Assist in finalising accounts of MYE Sub-contractors.

Job Requirements:

• Degree or Diploma in Engineering or Construction related degree
• At least eight (8) years of relevant experience as M&E Manager in large scale projects is an advantage
• Highly motivated, independent, initiative and responsible.
• Great communication and interpersonal skills.

• Reports directly to QA manager
• Develope Quality Manual
• Conduct in-house quality training
• Lead and guide site staff and contractors to achieve qulaity workmanship
• Conduct preiodic site survelliance with QA Supervisors
• Prepare inspection test plans
• Collate and report non conformanaces
• Attend site consultant/ coordination meetings
• Produce progress reports
• Mininum 4 years experience in related field
• Understands the requirement and criteria of CONQUAS 21; preferbaly with exposure to Quality Marks inspection procedure and preparation
• Conduct defect investigation and identification
• Proficient in Microsoft Office; Excel/ Words/ Powerpoint
• Good command of English
• Selt motivated
• indepentent

Job Description:

· Able to install and repair electrical wiring, systems & fixtures in buildings.

· Assist the operations teams with electrical troubleshooting and repairs

· To perform corrective / preventative maintenance on equipment

· Having experience installing and repairing plumbing fixtures

· Ensure that the work area is safe and clean

• To develop and submit a Project Interface Plan (PIP) which manages the interface management process throughout the project life cycle.
• To be responsible for the project wide internal and external interface management activities.
• To conduct weekly interface meeting with all stakeholders and interface manager of all contractors (including SC, direct contractors / specialists to be appointed)
• To manage and coordinate with interface manager of all systems to incorporate the finalised interface details into the overall combined services plans /BIM
• To work with BIM coordinator and be responsible for the BIM coordination for development of BIM Model.

Job Requirement

Shall possess an Engineering Degree with at least 10 years of relevant working experience in M&E services coordination OR

A diploma with at least 20 years of relevant working experience in M&E services coordination.

Job Description

• Prepare a lifting plans normal and critical lift plans
• Coordinate and Supervisor overall site lifting activities
• Conduct coordination and logistic meeting with subcontractors
• Visual Inspection of Cranes and lifting equipment’s
• Help site team in planning proper lifting equipment for required lifting works

Requirements

• 5 Years and more as Lifting supervisor/coordinator at construction site
• Lifting appointed person certified will be preferred
• Familiar with rigging techniques of construction material

ECO cum WSH Coordinator

Job Description

i) To work with the PM to comply with environmental, health & safety (EHS) laws laws, advise PM on environmental remediation measures, carry out site inspections and to engage workers and stakeholders on maintaining good environmental health standards

ii) Work with the PM to draw up, implement and monitor effective environmental management plans, including reviewing them when necessary:

· Prepare & submit to the PM the Site Environmental Control Programme before work commences at the worksite.

· Prepare & submit to the PM the Site Environmental Control Report once every two weeks.

iii) Inspect the construction site to ensure all facilities, equipment and operations do not pose any environmental health hazard;

iv) Inspect the on-site canteen, worker’s quarters, if any, and dining areas to ensure that good hygiene practices are being observed, and the areas are well maintained with good housekeeping.

v) Identify and discuss environmental health irregularities or potential lapses with the PM, and recommend corresponding measures to prevent or rectify such concerns;

vi) Attend to all feedback on any irregularities and inform the PM accordingly;

vii) Assist the authorities to investigate outbreaks of infectious, vector-borne or food-borne diseases at the construction site; and

viii) Organise campaigns, training courses and other activities, where required, to develop and sustain the interest of workers in maintaining good environmental health standards.

ix) Conduct inspection of the ECM at the worksite in accordance to ECM plan

x) Maintain records of all inspections.

xi) Advice the PM & project team members on the implementation of the EHSMS & implement the EHSMS.

xii) Assist the PM identify any unsafe work condition or unsafe work practice which is carried out in the worksite;

xiii) Recommend to the PM to implement such reasonably practicable measures to remedy the unsafe work condition or unsafe work practice;

xiv) Assist the PM implement such reasonably practicable measures referred to in (xiii) or safe work procedures.

xv) Advice the PM & the project team members on the implementation of the EHSMS.

xvi) Implement the EHSMS.

xvii) Stop the work or recommend to the PM / WSHO to stop the work if it is deem not safe for the work to continue.

xviii) Inform the higher level of management (e.g. Project Director) if conflict between EHS issues & operational considerations at the worksite cannot be effectively resolved.

xix) Report to PM

xx) Perform any duties assigned by PM.

Job Requirements

• Registered ECO by NEA
• Diploma in Public Health
• WSQ Advanced Certificate in Workplace Safety and Health
• Min 3 years of experience in the building & construction industry

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

• Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.
• Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.
• Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.
• For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.
• Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Diploma/Bachelor's degree in Civil & Structural Engineering
• Mininum 2 - 5 years' experience working in construction industry
• Preferably with HDB experience

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

- Diploma/Bachelor's degree in Mechanical Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Have experience with HDB projects

Job Description

a) Report to the Manager/Team leader as shown in the organization chart. Responsible for the coordination and control of technical matters, quality implementation and site supervision works.

b) The detailed duties and responsibilities includes but not limited to the following:

• Coordinate with all the parties including sub-contractors and consultants to solve and coordinate technical issues, production of drawings and ensure proper transmission of data to all parties involved. Ensure that the detailed schedules of drawing production and site progress are met.
• For quality management, the coordinator is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Supervise site works according to the quality and EHS requirements.
• Handle all inspections and handing over process with the final objective of achieving customer satisfaction and high Conquas/QM score.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Degree in Architecture / Engineering
• Minimum 2-3 years' experience in BIM Drafting (Architectural or M&E)

Job Description

a) Report to the Project Manager. Responsible for the EHS systems and implementations.

b) The detailed duties and responsibilities includes but not limited to the following:

• Assist and advise the Project Manager on EHS planning for overall project scope and detailed activities.
• Study and fully understand the requirements of company ISO, EHS and sub-contracts agreements.
• Liaise, handle and keep proper records in dealing with all related authorities in complying with their respective requirements.
• Conduct regular site audits to ensure compliance with EHS requirements. He is authorized to take necessary actions including issuance of partial stop work order as he and the Project Manager deem fit.
• Handle all accident and incident reports.
• Work as a team with project team members and sub-contractors to provide a safe working environment.
• Prevention of fines, imposition of demerit points and SWO from the authorities or owners like MOM, NEA and HDB is a key role which is also a key performance measurement of WSHO cum ECO.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Certified NEA, ECO, ECO, ECMO
• At least 3-5 years' on-site experience

Job Description

a) Report to the Manager/Team leader as shown in the organization chart. Responsible for the coordination and control of technical matters, quality implementation and site supervision works.

b) The detailed duties and responsibilities includes but not limited to the following:

• Coordinate with all the parties including sub-contractors and consultants to solve and coordinate technical issues.
• Production and maintaining of drawings from BIM (Revit) model and ensure proper transmission of data to all parties involved.
• Ensure that the detailed schedules of drawing production and site progress are met.
• For quality management, the coordinator is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Transform AutoCAD drawings into 3D drawings.
• Ensure BIM standards and Level of Development (LOD) are followed.
• Supervise site works according to the quality and EHS requirements.
• Handle all inspections and handing over process with the final objective of achieving customer satisfaction and high Conquas/QM score.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Degree in Architecture / Engineering
• Minimum 2-3 years' experience in BIM Drafting (Architectural or M&E)

Assembles, installs, tests and maintains electrical or electronic wiring, equipment, appliances, apparatus and fixtures using hand tools or power tools

Use building electrical distribution drawings, schematic, logic, single line drawings to diagnose electrical failures to 69kv.Use electrical drawings for new or expanding building projects and installation or relocating new or used equipment

Conducts routine testing on all electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures using testing devices to ensure compatibility and safety of systems in and around all applicable GHS facilities

Highlights

• Location: Serangoon Central area
• Payable OT
• 5-day work week

Job Description

• Chauffeur the director and his family around
• Send children to-and-fro from school and enrichment classes
• Run errands as requested by the director and his family
• Ensure safety and comfort of passengers
• Ensure cleanliness, hygiene and maintenance of vehicle at all times
• Abide by all traffic rules and regulations as stated in the Road Traffic Act

Job Requirements

• A valid Class 3 driving license
• Able to work overtime every day (1-3 hours)
• At least 2-3 years of driving experience
• Clean driving record
• Proficient at using GPS/ Familiar with Singapore roads
• Reporting Location: Serangoon
• Reporting Time: 6.30am

We value all applicants and thank you for your interest. However, please be advised that only shortlisted candidates will be contacted.

Job Description:

• Competent in reading and understanding drawings and perform measurements.
• Competent in preparing Bills of Quantities.
• Competent in understanding tender/contract/document/specifications/terms of contract
• Competent in analysing quotations/prices/rates, build-up rates and perform pricing
• Competent in performing contract administration including but not limiting to valuation of payments and variations claims in accordance to contract requirements
• Competent in performing all tender activities necessary for the procurement of new projects
• Competent in performing any other activities in connection with the businesses of the holding company
• Competent in working independently as well as with a team
• Participate in any activity ancillary to the company's other objectives e.g. charity events
• Competent in completing required obligations within stipulated timings and other constraints

Job Requirements:

• Bachelor's Degree in Quantity Surveying
• Minimum 3 years of working experience, preferably in the construction industry
• Proficient in Microsoft Office Tools

Engineering technicians,Installation: Setting up and testing products to ensure they work correctly,Maintenance: Performing regular checks and troubleshooting to ensure equipment is operating at its best,Repair: Using diagnostic tools to determine repair plans and fixing issues that may interfere with daily functions,Support: Providing on-site assistance with hardware and software use, and addressing technical issues,Training: Teaching customers how to use their products.

Installation: Installing electrical wiring, fixtures, and equipment, as well as conduits and pipes to house electrical wires and cables,Maintenance: Performing general electrical maintenance, and inspecting electrical components like circuit breakers and transformers,Repair: Repairing or replacing electrical wiring, equipment, or fixtures,Troubleshooting: Identifying electrical problems and troubleshooting malfunctions

Job description:

• Responsible for contract documentation
• Responsible for taking off measurement and preparation of tender submission
• Responsible for handling running project
• Review the subcontractor’s quotation for completeness
• Responsible for filing of respective project documents
• Assist and perform all tasks assigned by respective superior
• Ensure the return of duly signed subcontractor/supplier agreement/works order
• Other ad-hoc duties assigned by superior

Job Requirements:

• Degree / Diploma in Quantity Surveying and Building or equivalent with 2 years relevant experiences in construction or equivalent
• Process good knowledge of the market updates and construction cost trend
• Good communication and negotiable skill

Job Description

a) Report to the Manager/Team leader as shown in the organization chart. Responsible for the coordination and control of technical matters, quality implementation and site supervision works.

b) The detailed duties and responsibilities includes but not limited to the following:

• Coordinate with all the parties including sub-contractors and consultants to solve and coordinate technical issues.
• Production and maintaining of drawings from BIM (Revit) model and ensure proper transmission of data to all parties involved.
• Ensure that the detailed schedules of drawing production and site progress are met.
• For quality management, the coordinator is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Transform AutoCAD drawings into 3D drawings.
• Ensure BIM standards and Level of Development (LOD) are followed.
• Supervise site works according to the quality and EHS requirements.
• Handle all inspections and handing over process with the final objective of achieving customer satisfaction and high Conquas/QM score.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Degree in Architecture / Engineering
• Minimum 2-3 years' experience in BIM Drafting (Architectural or M&E)