Deployment:

• Mon to Fri: 7.00 am to 4.00 pm inclusive of 30 min lunch break
• Service not required on Saturdays, Sundays and gazetted public
• holidays

Scope of Works:

Reception:

• Cover front desk customer service duties for Primary School and MOE Kindergarten.
• Answer phone calls, attend to walk-in visitors, takes messages, responds to enquiries and provide general useful information (in a dynamic environment where high calls volume can be expected during peak hours).
• Maintain customer related information when required, eg phone log.
• Communicate with teachers regarding parents’ feedback/ messages from phone calls or walk-in parents.
• Handle daily varied demands and queries from parents/ students/ vendors/ staff etc.
• Render first level assistance to walk-in students’ needs including attending to sick and injured students, early dismissals. To escalate such cases to other colleagues in the office immediately if it is beyond superficial cases
• Handle/ support situation when student(s) vomited and soiled their clothes.
• Assist students in times of need, e.g. handling lost & found items, change of uniform, contacting teacher/ parent, locating classroom.
• Assist in receiving of goods and incoming mails.
• Maintain tidiness of the reception area at all times.

General Administration:

• Assist in the counting / sorting / packing / distribution of brochures or leaflets/items to the teachers and students.
• Assist in the dissemination of information: school circulars, parents’ messages.
• Inventory management of spare uniforms and first aid items.
• Assist with the updating of Organisational Chart when new staff joins, or resigning staff leaves.
• Assist with updating the attendance system on a daily basis, using the IT-enabled system of attendance tracking.
• Any other duties assigned by School Leaders, Administrative Managers (AM) or Operation Managers (OM), including supporting school key personnel as assigned by the AM.

Role Overview

• To assist in technical investigations in case of fault calls and regularly review the preventive and corrective maintenance activities for property in the aviation sector. He / She should be a competent problem solver on the ground, possessing strong technical knowledge in building and M&E maintenance and ability to liaise with service providers to ensure maintenance or repair works are carried out timely.

Role Responsibilities

• To review preventive and corrective maintenance works to ensure adherence to quality and safety standards and regulations
• To lead technical investigations in response to fault calls
• To review documentation on procedure and schedules of maintenance works
• To track inventory levels of spare parts, consumables and non-consumable items
• To prepare technical reports and / or monthly reports where required
• To conduct risk assessments in accordance to regulatory and organisational Workplace Safety and Health(WSH) policies and practices
• Responsible for initiating and tracking all purchase requisitions and closing of work orders, including thepreparation of costing for all proposed works to his supervisors for approval and liaison with client reps.
• Liaising with term and adhoc contractors for all appointed works and coordinating with relevantstakeholders for approval and work executions, including reporting work progress and completion.
• Reporting to the Engineer and appointed reporting supervisor for any adhoc work matters.

Deployment:

• Mon to Fri - 9.30 am to 6.30 pm
• Service not required on Saturdays, Sundays and gazetted public holidays

Scope of Works:

Reception

1. Manage the reception counter at the school’s General Office in accordance to MOE’s and the school’s operating procedures, rules, and regulations.
2. Keep the reception counter clean, tidy and presentable and maintain the necessary stationery, forms and material at the counter.
3. Perform customer service role in answering, screening, forwarding or taking down messages of incoming phone calls in a polite, respectful and professional manner.
4. Provide customer service support to walk-in students, teachers, parents, visitors and school stakeholders in a polite, respectful and professional manner with care and empathy.
5. Attend to unwell or injured students and render first aid if needed.
6. Contact parents of unwell students to be taken home or students who have been absent from school.
7. Maintain the sick bay including first aid supplies
8. Administer lost and found items and maintain records.
9. Maintain safety and security by directing visitors, including contractors, delivery men, parents, etc to wait at the designated waiting area and call relevant staff to meet or pick them up.
10. Liaise and work with the Security Officer to ensure that approval is granted by school before any student is allowed to leave school early.

General Administration

1. Handle general office administrative tasks such as receiving and directing of incoming mails/packages and goods, managing and distributing notifications and letters to teachers’ trays, filing, collating and printing of documents.
2. Attend to outgoing and incoming faxes.
3. Maintain the mail trays and form trays in the General Office.
4. Monitor and collate submission of forms by students.
5. Pack and distribute information, posters, leaflets etc. for students and teachers.
6. Support in sign-in and sign-out of coaches and instructors and relief teachers attendance.
7. During off-peak period, support back-end Admin in general admin work.
8. Support housekeeping for admin office and stores.
9. Assist in data entry, record keeping and filing of documents.
10. Support school events and any duties as assigned by school.

Deployment:

• Mon to Fri: 7.00 am to 4.00 pm
• Service not required on Saturdays, Sundays and gazetted public holidays

Scope of Works:

1. To prepare and distribute ingredients before start of practical lessons daily.
2. To assist in weekly food ordering and collect ingredients upon delivery by vendor.
3. To check that the vendor has delivered all the ordered ingredients.
4. To store food ingredients accordingly to food safety standards.
5. To perform inventory checks in NFS Special Rooms.
6. To maintain the quality of utensils and cooking equipment.
7. To upkeep maintenance of NFS Special Rooms (Kitchens, Office, Classroom) including cleanliness of Cookery Room and equipment including cleaning of worktops and mopping of kitchen floor daily.
8. To perform simple office tasks to support teacher in the kitchen or NFS room such as helping to lay out laptops and accounting of ICT peripherals used for teaching & learning thereafter.
9. To perform general cleaning of NFS rooms and other special rooms A&T Special Rooms every Friday and June/Sep school holidays as tasked by HOD in-charge.

Deployment:

• 32.5 hours per week based on a 5-day work week
• Mondays to Fridays, 7:00 am to 1:30pm
• Contract Period : 01 Jan 2025 to 31 Dec 2025 (12 months)

Scope of Works:

Recess Duty:

• Daily supervision duty at Canteen during recess time (6 recesses a day) and lunch time (up to 2 lunches 3 times a week)

Teacher Relief Support

• Relief duty in looking after pupils in classes/CCAs that have no teachers in attendance during/after school as assigned by Year Heads

After-School Dismissal Duty

• Daily supervision duty at main gate during dismissal time

Exam Matters and Teaching Materials

• Prepare teaching resources for teachers and department heads
• Scan Optical Answer Sheets for P3 to P6 exams
• Check, count and sort report books according to class register numbers after exams

Other Duties

• Update P1 to P6 class allocation at the end of the year
• Print and check mass class allocation input
• Assist in pre-event duties for Prelims and PSLE duties such as putting up labels and seating plans in all classrooms
• Support in Prelims and PSLE duties as liaison officers on all days of examinations (Oral, Listening, Written)
• Assist in pre-event administrative duties for P1 Orientation
• Collate and place food orders for all exam standardisation exercises during school examination periods (WA1, WA2, Prelims, SA2)
• Assist in packing goodies bags for events like National Day, Teachers’ Day, Children Day events and counting of pamphlets
• Collate pupils’ and parents’ feedback from pupils’/parents’ surveys
• Taking down and typing out minutes of Contact Time meetings
• Data entry duties as assigned by Principal, Vice Principals, Head of Department and Year Heads
• Perform any other duties as assigned by Principal, Vice Principals, Head of Department and Year Heads

Role Overview

To assist in technical investigations in case of fault calls and regularly review the preventive and corrective maintenance activities for property in the aviation sector. He / She should be a competent problem solver on the ground, possessing strong technical knowledge in building and M&E maintenance and ability to liaise with service providers to ensure maintenance or repair works are carried out timely.

Role Responsibilities

• To review preventive and corrective maintenance works to ensure adherence to quality and safety standards and regulations
• To lead technical investigations in response to fault calls
• To review documentation on procedure and schedules of maintenance works
• To track inventory levels of spare parts, consumables and non-consumable items
• To prepare technical reports and / or monthly reports where required
• To conduct risk assessments in accordance to regulatory and organisational Workplace Safety and Health(WSH) policies and practices
• Responsible for initiating and tracking all purchase requisitions and closing of work orders, including thepreparation of costing for all proposed works to his supervisors for approval and liaison with client reps.
• Liaising with term and adhoc contractors for all appointed works and coordinating with relevantstakeholders for approval and work executions, including reporting work progress and completion.
• Reporting to the Engineer and appointed reporting supervisor for any adhoc work matters.

Role Overview

To assist in technical investigations in case of fault calls and regularly review the preventive and corrective maintenance activities for property in the aviation sector. He / She should be a competent problem solver on the ground, possessing strong technical knowledge in building and M&E maintenance and ability to liaise with service providers to ensure maintenance or repair works are carried out timely.

Role Responsibilities

To review preventive and corrective maintenance works to ensure adherence to quality and safety standards and regulations

To lead technical investigations in response to fault calls

To review documentation on procedure and schedules of maintenance works

To track inventory levels of spare parts, consumables and non-consumable items

To prepare technical reports and / or monthly reports where required

To conduct risk assessments in accordance to regulatory and organisational Workplace Safety and Health(WSH) policies and practices

Responsible for initiating and tracking all purchase requisitions and closing of work orders, including thepreparation of costing for all proposed works to his supervisors for approval and liaison with client reps.

Liaising with term and adhoc contractors for all appointed works and coordinating with relevantstakeholders for approval and work executions, including reporting work progress and completion.

Reporting to the Engineer and appointed reporting supervisor for any adhoc work matters.

Deployment:

• Mon to Fri 7.00 Am to 4 Pm
• Service not required on Sat, Sun and gazetted PH.

Scope of Works:

The operations support officer will provide printing support to school staff and assist the School Administration Team to man the reception counter in the school’s general office. The role of the support staff covers the following areas:

• Support basic administrative duties such as priting, photocopying and faxing.
• Greet and welcome visitors
• Answer, screen and forward calls
• Attend to queries. (e.g. provide basic and relevant information) in person or via phone calls
• Handling mail and deliveries
• Must be able to operate the high speed multifunction printer.
• Attend to students who are sick and those seeking permission to leave school.

Qualification:

· At least Nitec in Technology for Facility Management, GEC “O” or “N” level, “A” Level or equivalent

· At least 2 years’ relevant working experience

Job Description:

· To man the FRC. The FRC is first point of contact whenever a user seeks for urgent assistance.

· To receive fault reports through the hotline and email, and redirect the fault reports to the relevant maintenance contractor

· To accurately and timely log-in/update fault reports into the MMS (Maintenance Mate System)

· To ensure the completion of the repair or servicing of any outstanding faults and service requests within the KPI

· To receive, process, and follow up events and logistics requests

· To perform other ad-hoc duties required

Qualification:

· At least Nitec in Technology for Facility Management, GEC “O” or “N” level, “A” Level or equivalent

· At least 2 years’ relevant working experience

Job Description:

· To man the FRC. The FRC is first point of contact whenever a user seeks for urgent assistance.

· To receive fault reports through the hotline and email, and redirect the fault reports to the relevant maintenance contractor

· To accurately and timely log-in/update fault reports into the MMS (Maintenance Mate System)

· To ensure the completion of the repair or servicing of any outstanding faults and service requests within the KPI

· To receive, process, and follow up events and logistics requests

· To perform other ad-hoc duties required

- Oversee operations and cleanliness on ground

- Perform general cleaning to maintain cleanliness

- Manage customer complaints in professional manner

- Manage manpower deployment

- Conduct site inspections to ensure compliance with health and safety standards

- Prepare operations reports and other administrative duties

- Any other related duties assigned by manager

To man the FRC. The FRC is first point of contact whenever a user seeks for urgent assistance.

· To receive fault reports through the hotline and email, and redirect the fault reports to the relevant maintenance contractor

· To accurately and timely log-in/update fault reports into the MMS (Maintenance Mate System)

· To ensure the completion of the repair or servicing of any outstanding faults and service requests within the KPI

· To receive, process, and follow up events and logistics requests

· To perform other ad-hoc duties required

Role Overview

• Supervision and co-ordination of excavation and trenching of the installation of fire hydrant chambers and pipes (both mechanical joint and push-on joint methods) are done using approved earthquake resistance Kubota Pipes
• Ensure that all installations are in accordance with the Kubota GENEX pipe installation methods, approved drawings, and applicable local Codes, Regulations and Standards

Role Responsibilities

• Inspect and monitor quality of workmanship of the works on site
• Check all drawings and contract specifications (including authority aubmission drawings and shop drawings) Job Requirements
• Knowledge of Microsoft office words, excels and PowerPoints
• Able to commit night shift & overtime

· Review Method Statement & Risk Assessment Document & Inspection Test Plan procedure

· Review the Quality Assurance (QA) & Quality Control (QC) Plan and Procedure Documents

· Follow the approved engineering drawings /documents & carried out inspection.

· Review & follow QP/PE Design approved documents

· Read & follow project requirements

· Daily site survey & monitor site activity

· Review Site Construction Query (SCQ) & approval

· Review project overall schedule on weekly basis on construction and inspection activities

· Checking procurement report & closely follow up

· Internal meeting with Eng., Team & contractor

· Follow-up & monitor daily project schedule

· Carried out Inspection as per AFI

· Attend FAT at vendor facility

· Prepare weekly report

· Checking daily & weekly report by contractor

· Attend Meetings with Stake holders

· Participate safety site walkdown

· Review third party inspection FAT documents

· Closely follow-up with punch list & carried out inspection

· Review Construction MOM & Monthly report

Job Requirements

• Possess at least Degree in (Mechanical) Engineering
• Must be experienced in supervision of Changi Airport Runway Projects
• Minimum 5 Years of experience as RTO on local projects
• Registered resident technical officer with IES/ACES
• Ensure Airport Operational and Safety Requirements
• Ensure all Regulations and Standards of the Runways, Taxi ways, Military Taxi way and Airport Emergency Service

Role Overview

• Supervision and co-ordination of excavation and trenching of the installation of fire hydrant chambers and pipes (both mechanical joint and push-on joint methods) are done using approved earthquake resistance Kubota Pipes
• Ensure that all installations are in accordance with the Kubota GENEX pipe installation methods, approved drawings, and applicable local Codes, Regulations and Standards

Role Responsibilities

• Inspect and monitor quality of workmanship of the works on site
• Check all drawings and contract specifications (including authority aubmission drawings and shop drawings) Job Requirements
• Knowledge of Microsoft office words, excels and PowerPoints
• Able to commit night shift & overtime

Job Requirements

• Possess at least Degree in (Mechanical) Engineering
• Must be experienced in supervision of Changi Airport Runway Projects
• Minimum 5 Years of experience as RTO on local projects
• Registered resident technical officer with IES/ACES
• Ensure Airport Operational and Safety Requirements
• Ensure all Regulations and Standards of the Runways, Taxi ways, Military Taxi way and Airport Emergency Service

Role Overview

Supervision and co-ordination of excavation and trenching of the installation of fire hydrant chambers and pipes (both mechanical joint and push-on joint methods) are done using approved earthquake resistance Kubota Pipes

Ensure that all installations are in accordance with the Kubota GENEX pipe installation methods, approved drawings, and applicable local Codes, Regulations and Standards

Role Responsibilities

Inspect and monitor quality of workmanship of the works on site

Check all drawings and contract specifications (including authority aubmission drawings and shop drawings) Job Requirements

Knowledge of Microsoft office words, excels and PowerPoints

Able to commit night shift & overtime

· Review Method Statement & Risk Assessment Document & Inspection Test Plan procedure

· Review the Quality Assurance (QA) & Quality Control (QC) Plan and Procedure Documents

· Follow the approved engineering drawings /documents & carried out inspection.

· Review & follow QP/PE Design approved documents

· Read & follow project requirements

· Daily site survey & monitor site activity

· Review Site Construction Query (SCQ) & approval

· Review project overall schedule on weekly basis on construction and inspection activities

· Checking procurement report & closely follow up

· Internal meeting with Eng., Team & contractor

· Follow-up & monitor daily project schedule

· Carried out Inspection as per AFI

· Attend FAT at vendor facility

· Prepare weekly report

· Checking daily & weekly report by contractor

· Attend Meetings with Stake holders

· Participate safety site walkdown

· Review third party inspection FAT documents

· Closely follow-up with punch list & carried out inspection

· Review Construction MOM & Monthly report

Job Requirements

Possess at least Degree in (Mechanical) Engineering

Must be experienced in supervision of Changi Airport Runway Projects

Minimum 5 Years of experience as RTO on local projects

Registered resident technical officer with IES/ACES

Ensure Airport Operational and Safety Requirements

Ensure all Regulations and Standards of the Runways, Taxi ways, Military Taxi way and Airport Emergency Service

General admin roles and responsibilities include providing support for all types of organizations and businesses and their staff members. Their duties can include general clerical tasks, such as drafting documents and answering telephones, as well as administrative jobs, including scheduling and project management and also include the following:

• Consult with employers to identify needs and preferred qualifications
• Interview applicants about their experience, education and skills
• Contact references and perform background checks
• Inform applicants about job details such as benefits and conditions
• Hire or refer qualified candidates
• Conduct new employee orientations
• Process paperwork

General admin roles and responsibilities include providing support for all types of organizations and businesses and their staff members. Their duties can include general clerical tasks, such as drafting documents and answering telephones, as well as administrative jobs, including scheduling and project management and also include the following:

• Consult with employers to identify needs and preferred qualifications
• Interview applicants about their experience, education and skills
• Contact references and perform background checks
• Inform applicants about job details such as benefits and conditions
• Hire or refer qualified candidates
• Conduct new employee orientations
• Process paperwork

• Provide recommendations for improving safety in the workplace.
• Conduct safety observation reports on a regular basis and depending on the length of the project.
• Attend safety walks and inspections before or during each project to analyze safety risks.
• Maintain documentations of the company safety procedures,accidents and related events.
• Create and implement safety plans while ensuring that they are being followed daily.
• Authorized to issue Stop Work Order (SWO), if any site work, process or work area is in imminent danger to workers, the public or pollution of the environment.

• Working Days & Hours : 5.5 days, 9am - 6pm
• Work Location : Geylang Bahru
• Salary: $3,000-$3500

Job Requirement

• Possess degree/diploma ( Mechanical Engineering / Electrical Engineering / Building / Quantity Surveying ) or similar
• Minimum 1 to 2 years of work experience in Construction industry
• Able to work on multiple projects, within simultaneous timeline

Job duties:

• Preparation of plans, contracts, budgets and other documentation
• Quantity take off, cost estimate, contract administrations and support in tender exercise
• Documents preparation for sourcing of quotations for both pre and post tender stages
• Preparation of tender evaluation, conduct negotiation with subcontractors & suppliers
• Liaise with the Procurement Department to ensure that all material are procured in accordance with the project schedule
• To monitor and keep track of the project expenses and try to optimize the project profit.
• To attend progress meetings, technical meetings, material submission meetings and etc to capture all variation claims and potential variation works and time implication.
• Responsible for preparation and timely submission of claims, variation orders, budget & cost control and settlement of final account.
• To ensure a timely closure of all main contract and subcontract final accounts.
• Risk analysis evaluation
• Feasibility studies
• Any other adhoc duties when required.

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

• Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.
• Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.
• Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.
• For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.
• Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Diploma/Bachelor's degree in Civil & Structural Engineering
• Mininum 2 - 5 years' experience working in construction industry
• Preferably with HDB experience

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

- Diploma/Bachelor's degree in Mechanical Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Have experience with HDB projects

Job Description

a) Report to the Manager/Team leader as shown in the organization chart. Responsible for the coordination and control of technical matters, quality implementation and site supervision works.

b) The detailed duties and responsibilities includes but not limited to the following:

• Coordinate with all the parties including sub-contractors and consultants to solve and coordinate technical issues, production of drawings and ensure proper transmission of data to all parties involved. Ensure that the detailed schedules of drawing production and site progress are met.
• For quality management, the coordinator is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Supervise site works according to the quality and EHS requirements.
• Handle all inspections and handing over process with the final objective of achieving customer satisfaction and high Conquas/QM score.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Degree in Architecture / Engineering
• Minimum 2-3 years' experience in BIM Drafting (Architectural or M&E)

Job Description:

• Competent in reading and understanding drawings and perform measurements.
• Competent in preparing Bills of Quantities.
• Competent in understanding tender/contract/document/specifications/terms of contract
• Competent in analysing quotations/prices/rates, build-up rates and perform pricing
• Competent in performing contract administration including but not limiting to valuation of payments and variations claims in accordance to contract requirements
• Competent in performing all tender activities necessary for the procurement of new projects
• Competent in performing any other activities in connection with the businesses of the holding company
• Competent in working independently as well as with a team
• Participate in any activity ancillary to the company's other objectives e.g. charity events
• Competent in completing required obligations within stipulated timings and other constraints

Job Requirements:

• Bachelor's Degree in Quantity Surveying
• Minimum 3 years of working experience, preferably in the construction industry
• Proficient in Microsoft Office Tools

Job Description

a) Report to the Project Manager. Responsible for the EHS systems and implementations.

b) The detailed duties and responsibilities includes but not limited to the following:

• Assist and advise the Project Manager on EHS planning for overall project scope and detailed activities.
• Study and fully understand the requirements of company ISO, EHS and sub-contracts agreements.
• Liaise, handle and keep proper records in dealing with all related authorities in complying with their respective requirements.
• Conduct regular site audits to ensure compliance with EHS requirements. He is authorized to take necessary actions including issuance of partial stop work order as he and the Project Manager deem fit.
• Handle all accident and incident reports.
• Work as a team with project team members and sub-contractors to provide a safe working environment.
• Prevention of fines, imposition of demerit points and SWO from the authorities or owners like MOM, NEA and HDB is a key role which is also a key performance measurement of WSHO cum ECO.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Certified NEA, ECO, ECO, ECMO
• At least 3-5 years' on-site experience

Job Description

a) Report to the Manager/Team leader as shown in the organization chart. Responsible for the coordination and control of technical matters, quality implementation and site supervision works.

b) The detailed duties and responsibilities includes but not limited to the following:

• Coordinate with all the parties including sub-contractors and consultants to solve and coordinate technical issues.
• Production and maintaining of drawings from BIM (Revit) model and ensure proper transmission of data to all parties involved.
• Ensure that the detailed schedules of drawing production and site progress are met.
• For quality management, the coordinator is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Transform AutoCAD drawings into 3D drawings.
• Ensure BIM standards and Level of Development (LOD) are followed.
• Supervise site works according to the quality and EHS requirements.
• Handle all inspections and handing over process with the final objective of achieving customer satisfaction and high Conquas/QM score.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Degree in Architecture / Engineering
• Minimum 2-3 years' experience in BIM Drafting (Architectural or M&E)