DESCRIPTION OF JOB TASK AND RESPONSIBILITIES:

• Direct reports to Site Safety Health Officer and PM.
• Receive and follow orders from the Site Safety & Health Officer.
• Conducts workplace safety inspections on construction site/projects and ensure that all activities are in compliance with safety standards and government regulations.
• Conducts new-employee health and safety orientations.
• Assist the Site Safety Health Officer in conducting accident investigations.
• Assist in maintenance of the database file system for annex specific deliverables and generate various safety related report.
• Perform and prepare Activity Hazard Analyses to evaluate work-related hazards associated with non-routine or complicated projects.
• Responsible for workplace and/or project site safety requirements which include but are not limited to inspection, identification, control and elimination of workplace hazards, appropriate personal protective equipment (PPE) and proper usage, safe working practices and procedures, safe site condition, proper usage of tools and equipment and monitoring of hazardous materials including generation of hazardous waste.

BASIC JOB QUALIFICATIONS

• Experience in the field of Safety and Health preferably with a US Military Base Installation.

POSITION SPECIFICATIONS: SPECIAL CERTIFICATIONS OR TRAINING

• Completed 30 Hour of Training on both OSHA CFR 1946 (Construction) or OSHA CFR 1910 (General Industry)
• Completed 40 Hour EM-385-1-1 NAVFAC Training OR
• Completed WSH training for Fall Protection, Scaffolds Safety, Electrical Safety, Control of Hazardous Energy (LOTO), Excavation, Hazard Analysis and Evaluation, Respiratory Protection, Construction Safety, Hot Work, Fire Protection, etc.

EDUCATION:

• Graduate of Bachelor of Science in Engineering or equivalent or any other related certifications.

EXPERIENCE:

• At least 1 of experience in the field of Safety and Health

**Junior Position

Job Description:

• Assist in project activities: prepare tender submission, cost estimation, obtaining quotation from suppliers/procurement dept. and sub-contractors, take off quality, cost control, variation orders and final accounts for projects.
• Involved in design, coordination and preparation of specification and plans and to liaise with Project Managers and Engineers for technical drawings and submission approval
• Prepare 3D structural models, shop drawings and fabrication drawings
• Attend meetings with client, suppliers, sub-contractors and consultants.
• Maintain good document control and filing
• Able to undertake any other duties assigned

Requirement:

• Shop drawing preparation and well versed using Tekla Structures or Autodesk advance steel, AutoCAD and Sketch-up software
• Min. 3 years’ experience (in structural steel is an added advantage)
• Independent and a team players to work with project teams and peers
• Good analytical, communication, organizing and interpersonal skills

Duties and Responsibilities

· To assist the Project Manager or Project Engineer in the daily execution of work;

· Inspecting construction sites regularly to identify and eliminate potential safety hazards;

· Enforcing site safety rules to minimize work-related accidents and injuries;

· To supervise the work of sub-contractors and in-house workers;

· To work closely with other site operations staff to meet the project schedule;

· Ensure installation is carried out as per construction drawings;

· To monitor the progress and quality of work being performed by workers;

· Ensure that works are executed within an acceptable standard of workmanship;

· Attend the daily tool-box meeting and convey clear instruction accordingly;

· Understand and ensure compliance with project requirements and scope of work.

Summary of Qualifications

1. Vocational Certificate in any relevant technical discipline;

2. At least 3 years of working experience in the related field;

3. Proven experience working as a Supervisor;

4. Good knowledge of local building codes and construction safety regulations;

5. Working knowledge of construction tools and equipment;

6. Possessed of relevant safety certification (SCWSH / BCSS / CSOC / W@H / First Aid etc.) is desirable;

7. Highly proactive attitude, self-motivated, team player, problem-solving skills;

8. Excellent organizational and communication skills;

9. May need to work on Sunday and public holiday.

10. Must be able to work night shift and split shift

11. Must be able to work extra hours or weekend if needed

• able to help in liaising to our vietnam workers part
• able to help in handling and talk to translate langagues
• able to help in sorting operarions work accordingly
• able to help hands on operations when needed
• able to communicate well and understand vietnamese language
• Able to work in cold room environment

Supervisor Responsibilities:

• Making sure employees that report to you meet performance expectations.
• Giving instructions or orders to subordinate employees.
• Ensuring that the work environment is safe, secure and healthy.
• Meeting deadlines.
• Approving work hours.
• Ensure great customer service at all levels.

Supervisor Requirements:

• Previous leadership experience.
• Excellent communication skills.
• Eye for detail and accuracy.
• Reliable, with high integrity and strong work ethic.
• Ability to work as part of a team.
• Professional appearance and attitude.
• Computer literacy.
• Proactive organizational skills.
• High school diploma.
• Ability to keep a positive attitude in a fast-paced environment.

• Schedule preparation, pre-planning and resource forecasting to all activities relating to the project.
• Monitor and control material management on site as to ensure proper storage and unnecessary wastage.
• Foster positive communications and relationships with team members, management, vendors and clients.
• Provide for site safety and security, devise and implement site policies and procedures.
• Handle emergencies appropriately according to established procedures, prepare and file accident reports.
• Supervise and evaluate staff, complete employee reviews; keep accurate records of employee attendance and timesheets; provide positive direction to motivate quality performance, discipline personnel when necessary and appropriate.
• Guarantee all safety precautions and quality standards are met.

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Roles & Responsibilities
Operations Supervisor (Food Manufacturing)

Must have at least 3 years of culinary operation experience in the food manufacturing business.
Liaise with Clients on their product requirements and expectations.
Able to monitor/direct the kitchen's full operations.
Ordering raw materials from various suppliers.
Stock-keeping of all material inventories.
Job scheduling of all kitchen staff.
Please make sure that all food products are up to standard.
Ensure timely delivery of all food products.
Ensure cleanliness and hygiene of kitchen at all times

Report to BIM, Project Engineer / DfMA Manager.

Scope of assist in maintaining product quality within the factory.

Collaborate with the team to meet quality standards and objectives.

Maintain records of quality control activities.

Work closely with suppliers and vendors to ensure quality compliance.

Assist in quality investigations and problem-solving.

Participate in training and development opportunities to enhance you skills

Requirements:

Diploma or above in mechanical engineering or related qualification

Knowledge in both M&E services and DfMA Principles, Familiarity with QA/QC process, tools and techniques. Knowledge in Industry Standards. Knowledge in BIM is an added advantage.

Strong independence and good communication in English

Able to work 5.5 days week

Fast progression position

Progression-centric

AWS included

Variable Performance Bonus

Annual Incentive Trip

Further learning/education encouraged and sponsorships

Flexible working hours and Work from home accepted on top of physical attendance

Various Medical Benefits

Examining and priming surfaces for plastering.

Selecting the appropriate plastering materials for different sites.

Protecting non-plastering surfaces with appropriate materials.

Applying different plasters to exterior and interior surfaces.

Fixing and repairing previous plastering work when necessary.

Reporting any structural issues to the site foreman.

Mixing and preparing mortar, plasters, and other finishes.

Consulting with other contractors to ensure project deadlines are met timeously.

• Oversee efficiency of operational processes
• Participate in strategic planning and goal-setting for various business functions, including IT and customer support
• Analyze business requirements and customer needs
• Research methods to improve operations and reduce costs
• Monitor and report on department performance
• Supervise and train employees
• Provide administrative support (e.g. updating inventory)
• Ensure compliance with company policies and regulatio

Supervisors give instructions to and oversee the work of other employees and may be charged with making sure great customer service is provided. Also responsible for hiring or firing employees.

• Previous leadership experience.
• Excellent communication skills.
• Eye for detail and accuracy.
• Reliable, with high integrity and a strong work ethic.
• Ability to work as part of a team.
• Professional appearance and attitude.
• Proactive organizational skills.
• Ability to keep a positive attitude in a fast-paced environment.

Descriptions:
1. Responsible for supervising the warehouse personnel to ensure services provided meet customer’s requirements
2. Responsible for inventory control accuracy, stock replenishment, capacity planning, timely processing of all inbound and outbound activities
3. Perform inventory reconciliation on stock discrepancy
4. Responsible for warehouse space management and proper handling of machinery and equipment
5. Lead and implement warehouse management system and other work improvement projects
6. Any other duties as and when assigned.

Requirements:
1. Candidate must possess at least “O”/ “N” level or equivalent
2. At least 5 years’ experience in supervisory role
3. Ability to multi-task and meet tight deadlines
4. Good planning and organising skills
5. High degree of ability to adapt to evolving conditions

You will be involved in the processing of prescriptions, dispensing and inventory management. We are looking for individuals who has the aspiration to learn and grow with the organisation.

• Diploma in Pharmaceutical Science or a Certificate in Pharmacy Technician Course
• 2 weekends off per month and able to commit to shifts
• Training opportunities available for upgrading

Yishun Health is a network of medical institutions and health facilities of the National Healthcare Group in the north of Singapore. It comprises Admiralty Medical Centre, Khoo Teck Puat Hospital and Yishun Community Hospital.

Roles & Responsibilities:

· Ensure all projects, preventive maintenance works and SOPs are carried out timely and according to planned schedule as per the agreed Response, Delivery and Completion Time.

· Manage subcontractors or parties engaged by Client for the Facility Management Services in various specific disciplines.

· Effectively maintain the respective systems.

· Able to read technical/architectural drawings and diagrams

· Troubleshooting and repair for building related issues eg tiles crack, leaking, paint peel, collapsed false ceiling, wall cracks, door lock faulty, hinges faulty, door faulty, floor finishes, tap leaking, pipe burst, sensor faulty, floor trap choke and etc

· Support and assist in all projects (install, resolve, repair, trouble-shoot) etc.

· Attend to site show rounds conducted.

· Ensure that all his technical team and direct contractor appointed or Contractor’s subcontractors follow Client’s QEHS ISO requirements and Statutory Requirements.

· Undertake any other related duties stipulated.

· Install and test new products, as well as demonstration to clients on the use and maintenance of installed equipment

· Able to write service reports after job completion

Job Requirements:

· Higher Nitec or Nitec with minimum 5 years relevant experience or National Certificate NTC 2 from Institute of Education or Construction Industry Training Institute CITI high certificate with minimum 3 years relating to building and building services maintenance , relevant experience or equivalent;

· All technicians shall have general competency in the use of computer, Outlook emails and the following application Software; MS office, especially MS Outlook express, Microsoft Excel (intermediate level), MS Word and MS Power point.

· Honest and committed individual

· Able to commit within a short notice

Descriptions:

• Plan and supervise all maintenance services, schedules and improvement works
• Ensure the team and external contractors/vendors comply with ISO standards and regulations
• Coordinate and direct all administration of M&E works by liaising closely with consultants and client
• Monitor building’s system breakdown, defects and shutdowns
• Conduct and inspection to ensure property is well maintained
• Prepare monthly reports for the management
• Manage the day-to-day operations of multiple facilities including office buildings, or other managed spaces within the assigned zone and ensure the efficient operation, maintenance, and safety of the facilities.
• Manage and mentor facility teams, including executives, supervisors, technical officers, technicians, and support staff, to ensure a cohesive and efficient workforce.
• Carry out internal inspection weekly. This shall form part of the Key Performance Indicators
• Direct and co-ordinate all other matters including monitoring of progress, installation and testing of equipment, technical personnel training, logistic support, documentation preparation and operation start-up.
• Manage budgets for each facility in the zone, allocating resources effectively to meet maintenance and improvement needs
• Assist in the execution of work order and follow up with the service reports when the works are completed and submit the service report for record
• Coordinate with external service providers, contractors, and vendors to ensure service delivery meets quality standards and contractual obligations
• Develop and implement preventive maintenance programs, identify repair needs, and ensure timely resolution of facility issues
• Ensure compliance with health and safety regulations, implementing measures to mitigate risks and maintain a safe working environment
• Implement eco-friendly and sustainable practices, working towards energy efficiency and waste reduction goals
• Oversee facility improvement and renovation projects from conception to completion, collaborating with internal teams and external contractors
• Ensure that all his technical team and direct contractor appointed or Contractor’s subcontractors follow Client’s QEHS ISO requirements and Statutory Requirements

Requirements:

· Degree holder in Architecture or Engineering or Real Estate or Building/Facilities Management or equivalent with 7 years of relevant working experience; OR

· Diploma holder in Architecture or Engineering or Real Estate or Building/Facilities Management or equivalent with 10 years of relevant working experience.

Roles & Responsibilities

Ensure that all works carried out are of highest quality standard to meet customer satisfaction.

Execute the site testing and commissioning activities of the company to the satisfaction of the owners and builders

Liaise with Yard’s commissioning personnel to close out issues which will affect the smooth completion of projectEnsure that Punch List are corrected and Test Memo and Service Acknowledgement Report are signed

Ensure that site issues are highlighted to the Production Manager/Assistant Production Manager in order to come up with proper and timely solution

Inform the project engineers in the event of changes on design, drawings and system operation which may arise during the job execution.

Highlight to Project Engineers any changes that may be required on supplied equipment for quality improvement

Ensure that the equipment used for commissioning are calibrated and maintained in good working condition to achieve quality standard.

Ensure non-conformity report is being raised as and when necessary.Ensure that non-conformances are promptly resolved by means of investigation and corrective action.

To perform all general and specialized angiographic procedure (Cardiology and Vascular) and additional modalities including Single Photon Emission Computed Tomography (SPECT) imaging. To ensure quality with due regard to patient care, clinical responsibility, radiation protection and effective use of technology.

MAJOR DUTIES AND RESPONSIBILITIES

(A) OPERATIONS AND CLINICAL (80%)

1. Be clinically and technically competent in performing angiographic (Cardiac and Vascular) and additional modalities including SPECT scan where necessary.
2. Perform and assisting to cardiologist and vascular interventionist all angiographic examinations on patients with clinically accepted standards described in the SOP; with due regards to radiation safety, patient care and clinical requirement.
3. Participate in the maintenance of a round-the-clock angiography service by rotating for emergency stand by on call.
4. Being on-call for relief staff for emergency case for both cardiac case and vascular case by roster.
5. Ensure good working condition of the angiography machines and other machines within the cneter including ultrasound and SPECT machine by performing regular quality assurance checks and control, notifying vendors and senior staff of equipment problems.
6. Observe all radiation safety protection rules with regard to patients, staff and the public.
7. Responsible for the good housekeeping and inventory of his/her workstation.
8. Ensure maintenance of proper records of cases done consistent with good angiography practice.
9. May perform more advanced angiographic and SPECT imaging with relevant experience and training.
10. Provide guidance for quality control, practical teaching of students and juniors in patient care and clinical areas of angiography.

(B) GENERAL (20%)

1. Assist in patient management such as preparing, explaining, appointments, statistics, and sending the necessary angiographic image in the system.
2. Supervise junior staff working with him/her.
3. Assists in data collection.
4. Any other duties assigned by supervisors.

JOB REQUIREMENTS

(A) EDUCATION, TRAINING AND EXPERIENCE

1. Recognised Diploma or Degree in Diagnostic Radiography or equivalent.
2. Competent in angiography/nuclear medicine and conversant in angiographic/MIBI scan processing, quality control and troubleshooting of angio and nuclear medicine equipment.

(B) PROFESSIONAL LICENCE

1. Radiation Licences under Radiation Protection Act (Chapter 262)

ABNORMAL PHYSICAL WORKING CONDITION

1. Radiation hazard, physical lifting of patients, heavy and others (pertaining to hospital environment).

Job Description:

• Be responsible for the planning, scheduling, controlling, and coordinating of building services-related works in terms of preventive, breakdown, and rectifying works.
• To work with and lead a team of supervisors & skilled workers to carry out their work accurately and timely and to ensure that works on site are carried out according to client requirements.
• Ensure safety first when carrying out works.
• Ensure safety tools, equipment, certificates, and documentation are in order when carrying out work.
• Liaise and hold meetings with clients, managing agents & sub-contractors to ensure that all requirements by clients and relevant authorities are adhered.
• Monitor, track, and provide timely project progress reports to the management.
• Able to handle feedback from clients positively and close the loop via email.
• Able to write an incident report upon collecting ground information.

Job Requirements:

• Candidate must possess at least Diploma or Degree in Facility Management or any Engineering fields
• Committed, positive attitude & able to handle projects independently.
• Good team player with the ability to lead and multi-task.
• SIFMA minimum Tier 4 is an advantage
• At least 2 years of working experience in the related field for Degree holder
• Or at least 3 years of working experience in the related field for the non-Degree holder

Roles & Responsibilities:

· Ensure all projects, preventive maintenance works and SOPs are carried out timely and according to planned schedule as per the agreed Response, Delivery and Completion Time as stated in this Contract.

· Manage subcontractors or parties engaged by Client for the Facility Management Services in various specific disciplines.

· Effectively maintain the respective systems.

· Able to read technical/architectural drawings and diagrams

· Troubleshooting and repair for AV and sound system related issues

· Attend to site show rounds conducted.

· Ensure that all his technical team and direct contractor appointed or Contractor’s subcontractors follow Client’s QEHS ISO requirements and Statutory Requirements.

· Undertake any other related duties stipulated.

· Install and test new products, as well as demonstration to clients on the use and maintenance of installed equipment

· Able to write reservice reports after job completion

Job Requirements:

· Higher Nitec or Nitec with minimum 3 years relevant experience in the management of audio visual (AV) system, sound system etc;

· All technicians shall have general competency in the use of computer, Outlook emails and the following application Software; MS office, especially MS Outlook express, Microsoft Excel (intermediate level), MS Word and MS Power point.

· Honest and committed individual

· Able to commit within a short notice

Responsibilities:

· Manage and supervise the Technicians and work with FM teams, security teams and carpark teams, in carrying out duties as specified herein.

· Coach and train his technicians so that they are familiarised and knowledgeable of the requirements of this contract.

· Manage all technical staff, including direct contractors or parties engaged by Client for the Facility Management Services in various specific disciplines.

· Conduct regular sub-meetings with subcontractors/stakeholders with minutes-taking.

· Manage and effectively maintain the respective systems.

· Ensure all projects, preventive maintenance works and SOPs are carried out timely and according to planned schedule as per the agreed Response, Delivery and Completion Time as stated in this Contract.

· Support and assist in all projects (install, resolve, repair, trouble-shoot) related to Mechanical, Electrical, Fire Protection, Lift & Escalator, ACMV, BMS, Audio Visual and Facilities Management

· Attend to site show rounds conducted by Client.

· Ensure that all his technical team and direct contractor appointed by Client or Contractor’s subcontractors follow Client’s QEHS ISO requirements and Statutory Requirements.

· Undertake any other related duties stipulated.

Requirements:

· Diploma with minimum 3 years relevant experience in the management of audio visual (AV) system, sound system etc or its equivalent.

· Higher Nitec or Nitec with minimum 5 years relevant experience in the management of audio visual (AV) system, sound system etc or its equivalent.

· Energetic, independent, and self-motivated.

· Good written and communication skills and computer literate.

· Meticulous and a good team player.

Job descriptions:

• Carrying out maintenance, repairing and servicing tasks on ACMV system including BMS, chilled water system, FCU, AHU and mechanical ventilation system
• To carry out preventive / breakdown and corrective maintenance
• Attend to defects, complains and requests promptly
• Perform day to day inspection and logging of all facility systems
• Provide technical advice and assistance on all maintenance and breakdown function
• Capable of installing new systems, duct work and testing of ACMV systems will be an added advantage

Requirements:

• 2 years and above in ACMV Facilities Management
• Professional Certificate/NiTEC, Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, any field