• To lead and manage the full duties of a Fire Safety Manager for Factory in accordance to the Fire Safety Act and its subsidiary regulations.
• To prepare and execute the Emergency Response Plan (ERP) for the premises and distribute the ERP to the occupants of the premises.
• To advise and recommend a list of fire-fighting equipment for the Company Emergency Response Team where applicable.
• To train, coordinate and supervise the Company Emergency Response Team for the premises in first-aid, firefighting, and evacuation in the event of fire or other related emergencies.
• To conduct daily checks and inspections within the premises and remove or cause to be removed any fire hazard that is found within the premises and prepare monthly FSM inspection report.
• To supervise the maintenance of Fire Safety works in the premises and follow up on the repair or replacement as and when necessary.
• To conduct in-house fire drills for the occupants of the premises at least once or twice in every calendar year or on such occasion as may be directed by the commissioner or SCDF.
• To conduct at least 2 table-top exercise within the premises each year and to evaluate the ERP for those premises and to record minute of meetings and provide feedbacks for improvement.
• To furnish incident report and investigation report in the event of fire and other related emergencies, including fire drills and table-top exercise.
• To conduct necessary training and regular briefing to the occupants in the premises in support of Fire Safety such as: first aid, firefighting, and evacuation in the event of fire or other related emergencies
• To supervise those premises with Fire Command Centre on the operation in the event of fire and other related emergencies.
• To prepare Fire Safety guidebook and support the Fire Management System setup for the occupants of the premises.
• To carry out Fire Risk Assessment of the premises and recommended areas of improvement.
• To ensure annual Fire Certificate Renewal for premises with PE Endorsement.
• To perform any other tasks as and when assigned by Superior.

Minimum Diploma

Minimum 2 years experience

Must have certification by SCDF as FSM

Responsibilities:

· Conduct daily toolbox meeting.

· Ensure compliance with all legal and regulatory requirements.

· Conduct safety inspections and ensure that any unsafe act or condition is rectified.

· Enforce and promote safety rules and regulations at workplace.

· Maintain, update and retain relevant records and certificates as required under the regulation required by the regulatory authorities.

Requirement:

· Qualified WSH Coordinator under MOM

· Minimum 1 years of relevant experience in Workplace Safety & Health, Construction industry preferred

· Able to start work in short notice or immediately

· Fresh graduates are welcome

· Only Singaporeans or Permanent Resident may apply

Resumes please INCLUDE:

Recent photograph
Personal Particulars
Education
Work experiences
Current and Expected salary
Date of availability

Job Description

• Industry/ Organization Type: Manufacturing/Semi-conductor
• Position Title: Safety Coordinator/Safety Co-Ordinator, Safety Health & Security cum Facilities & Fleet Management
• Working Location: Kaki Bukit
• Working Hours: Monday – Friday, 8.30am – 5pm
• Salary Package: Up to $4,000 + VB
• Duration: Permanent

Key Responsibilities

• Ensure occupational safety, health, and security within the workplace.
• Oversee safety practices and execute Safety Health & Security (SHS) activities to ensure compliance with legal regulations while promoting a safe work environment.
• Organize and document monthly safety meetings with Field Service Operations and quarterly SHS Committee Meetings, preparing agendas and minutes.
• Plan and conduct safety-related training for staff, both internal and external.
• Conduct safety inspections at office and customer premises, providing follow-up reports.
• Update HIRARC, SWP, and MOS as needed.
• Supervise and monitor safe operations of FSO activities on-site, ensuring they align with customer requirements and protocols.
• Coordinate with various agencies for license renewals.
• Participate actively in facilities and fleet management activities.
• Execute additional tasks as directed by superiors to support business operations.

APPLY NOW!!!

• Minimum Diploma qualification with at least 2 years of relevant experience.
• Certified with WSQ Advanced Certificate in Workplace Safety and Health (Level B).
• Additional certifications in safety and health are advantageous.
• Proficient in Microsoft Office.
• A valid Class 3/3A driving license is beneficial.
• Cleanroom experience is preferred but not mandatory.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #72069 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

• Create a sales strategy to provide revenue retention, revenue growth, and new business for your personal client portfolio in order to reach or surpass your personal sales targets and overall organic business growth goals.
• Sets clear objectives for each sales call or meeting; adapts standard materials to deliver engaging presentations to customer decision makers and influencers; asks pertinent questions to gather information, assess the level of interest of customers, and identify and respond to areas requiring additional information or explanation.
• Create a personal network in the business sector and represent the firm to clients and at business sector events. Obtains market knowledge and raises the company's visibility and reputation, as well as its goods, services, and capacity to deliver comprehensive safety solutions.
• Configure product and service solutions, as well as associated contractual conditions, to satisfy the mid- to long-term demands of clients, including input from appropriate internal specialists.
• Presents the solution to client representatives and negotiates an arrangement within a set of commercial constraints.
  

Qualifications:

• 2+ years of experience in sales or inside sales position
• Experience of sales within marine or fire industry
• Must be a self-driven professional

Technical Safety Specialist (Ref.No. R1007102)

at our location in Singapore

This Technical Safety Specialist is reporting directly to the System Assurance Manager.

This Technical Safety Specialist is responsible for the execution of RAMS Engineering activities in accordance with the company’s processes, applicable industry standards and best practices.

You will enjoy having these responsibilities:

• Execution of RAMS Engineering activities in accordance with the company’s processes, applicable industry standards and best practices;

• Ensure RAMS strategies are flowed down throughout the project organisations;

• Perform hazard identification studies, hazard analyses, safety analyses and hazard management;

• Define safety requirements; analyse and evaluate design compliance with safety requirements and safety principles;

• Review safety test strategies, plans, procedures, scenarios and test results;

• Review Installation, Cut-in / Cut-out, T&C, and Deployment method statements;

• Review the adequacy and completeness of safety evidence and produce safety artefacts;

• Ensure effective communication of Safe Operating Requirements (SORs) to Customer;

• Perform RAM analyses and manage RAM demonstration;

• Interface the Customer and other parties for project RAMS coordination;

• Interface the organisation management for RAMS activities internal reporting;

• Maintain KPI on RAMS activities including: Quality, Cost and Deadlines;

• Other tasks as assigned by the direct manager.

You have:

• Bachelor’s degree or higher in Engineering Fields of Electrical, Electronic, Computer Science & Engineering, or related discipline

• Good knowledge of CENELEC (EN) Railway RAMS Standards

• Good knowledge of railway signalling principles and CBTC system

• Minimum 5 years’ experience in RAMS Engineering on railway safety-related systems including minimum 2 years’ RAMS experience on CBTC system; OR

• Minimum 5 years’ experience in Design & Engineering (System, HW and/or SW), Integration, Testing, Verification and/or Validation of CBTC system

Facilities Management

• Conduct regular inspections of building facilities and equipment, identifying and reporting issues for resolution.
• Coordinate routine maintenance and repairs with contractors and vendors such as HVAC systems, lifts, plumbing, and electrical systems.
• Monitor and restock facilities consumables, including pantry and washroom supplies.
• Perform minor repairs (e.g., changing light bulbs, fixing locks) as needed
• Support the Compliance & Facilities Manager in projects such as renovations or facility upgrades.
• Perform other administrative or operational tasks as assigned.

Workplace Safety & Health

• Conduct workplace safety inspections to identify hazards and report non-compliance issues.
• Assist in updating Risk Assessments (RAs) and ensuring they align with statutory requirements.

Requirement

• Perform regular checks on fire safety equipment (e.g., extinguishers, alarms, emergency exits) and report any issues.
• Assist in organizing fire drills and ensuring staff are familiar with evacuation procedures.
• Liaise with external vendors for the maintenance and inspection of fire safety systems.
• Assist in ensuring fire safety compliance during audits or inspections by regulatory bodies (e.g., SCDF)
• Minimum ITE qualification in Building Services, Facilities Management, or related field.
• At least 1-2 years of experience in facilities or safety management.
• Certifications such as Fire Safety Manager (FSM) or knowledge of the Workplace Safety & Health Act are advantageous but not mandatory.
• Strong organizational and multitasking skills.
• Effective communication skills for coordinating with vendors and internal stakeholders.

R1552376

Clarence Khoh

Purpose of Role：

The Policy and Program Manager is responsible for designing and implementing fire safety programs, with a primary focus on the APAC region. This role ensures compliance, drives program success, and enhances safety across multinational offices.

Key Responsibilities：

• Program Implementation: Lead the execution of fire safety programs across multiple offices, ensuring achievement of pre-defined metrics and goals.
• Audits and Inspections: Plan and oversee regular fire safety audits and inspections to maintain compliance with internal policies and external regulations.
• Training and Communication: Develop and organize training programs, while crafting effective communication strategies for both daily operations and emergency scenarios.

Requirements：

• Bachelor’s degree or higher.
• At least 4 years of experience in relevant fields, such as physical security operations management or program management.
• Proven experience leading teams.
• Demonstrated success managing programs in multinational corporations similar to Bytedance.
• Exceptional organizational, communication, and leadership abilities.

The Program Manager is responsible for designing and implementing fire safety programs, with a primary focus on the APAC region. This role ensures compliance, drives program success, and enhances safety across multinational offices.

Key Responsibilities:

• Program Implementation: Lead the execution of fire safety programs across multiple offices, ensuring achievement of pre-defined metrics and goals.
• Audits and Inspections: Plan and oversee regular fire safety audits and inspections to maintain compliance with internal policies and external regulations.
• Training and Communication: Develop and organize training programs, while crafting effective communication strategies for both daily operations and emergency scenarios.

Requirements:

• Bachelor’s degree or higher.
• At least 4 years of solid experience in relevant fields, such as physical security operations management or program management.
• Demonstrated success managing programs and collaborating with cross-functional teams in multinational corporation settings.
• Proven experience in managing projects/programs.
• Experience in team-leading is a plus.
• Exceptional organizational and communication skills.
• Relevant certificates such as certified Fire Safety Manager with SCDF is a plus.

Contract Period:

• 2 weeks (20 Jan 2025 to 31 Jan 2025)

Deployment:

• Mon to Sat: 8.00 AM to 5.00 PM

Work Location:

• Republic Poly

Scope of Works:

• Ensure provision of the WSH Act and subsidiary Regulations are complied with.
• Ensure that work is carried out as per the documented work instructions & safe task procedures.
• Apply permit to work system as required by the procedures and regulations.
• Ensures that all operations/activities conform to Health, Safety & Environmental requirements and maintains high safety standards.
• Carries out gas monitoring of vessels as requested by clients.
• Issue of various permit-to-work and identification of unsafe acts, unsafe conditions both on vessels, shipyard sites and workshops.
• Ensure that the work forces compliance to the legal requirements and In-house rules and regulations.
• Participate in the preparation of safe work and operation procedures.
• Any other tasks and responsibilities assigned from time to time.

Responsibilities:

• Provides safety engineering guidance and support to other disciplines, ensuring assurance of technical safety aspects in design.
• Ensures major hazards are identified, adequately assessed, evaluated, and managed in accordance with relevant statutory, client and project specific requirements.
• Identifies safety engineering elements are not fully integrated into the design and propose solutions to rectify the situation.
• Identifies change in regulatory requirements and advise relevant departments of requirements to comply.
• Develop specifications, terms of reference and scopes of work for specific safety engineering studies.
• Gather necessary information and provide inputs to safety studies.
• Develop or supports safety philosophies: Passive Fire Protection, Escape Evacuation and Rescue, ESD,
• Knowledge of Fire & Gas Detection, Fire Fighting Develop or support functional safety management: FSMP, SRS
• Supports the development of ESD and F&G Cause & Effect design.
• Leads hazardous area classification studies, Writes procedures, specifications, and material.

Requirements:

• Degree in Chemical/Petroleum Engineering with relevant experience in Process/Technical Safety
• Engineering degree with a Master's or Diploma in Process Safety and Risk Engineering, and experience in Technical Safety will be strongly considered.
• 3 years of relevant working experience
• Possess positive and willing to learn attitude.
• Able to multi-task and able to work in a fast-paced environment.

Our Address and Working Hours:

Seatrium (SG) Pte. Ltd.

(Admiralty Yard)

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

(Pioneer Yard)

50 Gul Road, Singapore 629353

(Islandwide transport provided)

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Working hours

(All Yards)

Monday – Thursday: 8:00am – 5.15pm

Friday: 8:00am – 4.30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

• Salary: $4000 to $5000
• Working hours: Monday to Saturday, 44hrs a week
• Location: Seletar North Link (Punggol MRT)

Job Summary: As the main contractor’s Safety Officer, you will report to the Project Manager and be responsible for maintaining a safe and compliant construction site. Your duties include developing and enforcing safety protocols, conducting regular inspections, facilitating training programs, and fostering a culture of safety among all personnel. You will also liaise with regulatory bodies to ensure compliance with Singapore’s Workplace Safety and Health (WSH) regulations and best practices.

Key Responsibilities:

1. Site Inspections: Conduct safety inspections to identify hazards and ensure compliance with WSH regulations. Perform periodic safety audits and document findings.
2. Risk Management: Conduct thorough risk assessments to identify potential hazards, develop control measures, and monitor risk assessments regularly to ensure ongoing safety.
3. Training and Education: Organize and deliver safety training programs, including toolbox meeting and emergency response drills, ensuring all personnel understand safety protocols and the proper use of personal protective equipment (PPE).
4. Incident Management: Investigate accidents and near-misses to determine causes, recommend preventive measures, and prepare detailed incident reports for management and relevant authorities.
5. Safety Protocols: As the main contractor's Safety Officer, you will implement and enforce safety protocols, ensuring they are updated to reflect any changes in regulations or company policies. You will also liaise with regulatory bodies, such as the Ministry of Manpower (MOM), to guarantee compliance with all statutory requirements, reinforcing a commitment to safety at the Main Contractor level.
6. Emergency Preparedness: Develop and maintain emergency response plans, conducting regular drills to ensure site readiness.
7. Documentation and Reporting: Maintain accurate records of safety inspections, safety training
   sessions, incident reports, and risk assessments. Prepare monthly safety performance reports.
8. Communication: Act as a point of contact for safety-related concerns, facilitating clear
   communication between management and workers to promote a culture of safety.

Responsibilities:

• Diploma or degree in Occupational Safety and Health, Environmental Science, or a related field.
• Valid Workplace Safety and Health Officer (WSHO) certification recognized by MOM, with additional certifications in risk management, fire safety, first aid, being advantageous.
• Minimum 3-5 years of experience as a Safety Officer in the construction industry, with a strong understanding of WSH regulations in Singapore.
• Excellent knowledge of construction site safety practices and legal requirements.
• Ability to work outdoors in varying weather conditions.

If you are interested to apply, kindly WhatsApp me your updated resume in DOC file and allow our Consultant to match you with our Clients.

Whatsapp: +65 8525 2419

Email: [email protected]

Tan Man Ee Reg No: R22108289

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Roles & Responsibilities

1. Dual Certification and Registration:

The WSHO cum ECO must be registered with the Ministry of Manpower (MOM) as a Workplace Safety and Health Officer.

The individual must also be registered with the National Environment Agency (NEA) as an Environmental Control Officer.

2. Experience Requirement:

The candidate must have at least 3 years of post-registration practical experience that is relevant to the scope of work under the contract. This experience is crucial to ensure the individual is competent to manage safety, health, and environmental matters effectively.

3. Ensuring Compliance with WSH and Environmental Legislation:

The WSHO cum ECO is responsible for ensuring that all works are planned and executed in strict compliance with all Workplace Safety and Health (WSH) and Environmental legislative requirements.

This includes ensuring adherence to the Workplace Safety and Health Act, Environmental Protection and Management Act, and other relevant laws, regulations, and guidelines.

Compliance with both the legislative requirements and contractual safety and environmental obligations is a key responsibility of the WSHO cum ECO.

4. Safety and Health Management:

Plan and implement safety procedures: The WSHO cum ECO must develop and maintain a Safety Management System (SMS) that addresses all hazards related to the project.

Monitor and review work processes to ensure they are carried out safely and in compliance with the WSH regulations.

Conduct risk assessments to identify and mitigate risks before work begins.

Carry out safety inspections on-site to identify any unsafe conditions or work practices and take corrective actions as needed.

Ensure that all workers are trained and competent in safety protocols, including the proper use of personal protective equipment (PPE) and safety measures.

5. Environmental Management and Control:

Develop and implement an Environmental Management System (EMS) to ensure compliance with all environmental regulations, especially concerning noise control, air and water pollution, and waste management.

Conduct environmental audits and inspections to ensure the site remains compliant with the National Environment Agency (NEA) guidelines and environmental regulations.

Oversee the safe disposal of waste and ensure that waste management practices meet environmental standards.

Monitor for potential environmental hazards, such as air or water pollution, and take corrective actions to mitigate environmental risks.

6. Compliance with Code of Practice for Temporary Traffic Control at Work Zones:

The WSHO cum ECO must be familiar with the Code of Practice for Temporary Traffic Control at Work Zones and ensure full compliance with this code throughout the project.

This includes overseeing the planning and implementation of temporary traffic control measures to ensure the safety of workers, motorists, and pedestrians around the work zone.

Conduct regular inspections of traffic control setups to ensure they meet the required safety standards, and adjust measures as needed to minimize risks.

Work closely with authorities and stakeholders to coordinate traffic management plans and ensure smooth operation around the work area.

7. Incident Investigation and Reporting:

The WSHO cum ECO must investigate all safety, health, or environmental incidents, near misses, and accidents that occur on-site.

Prepare incident reports and recommend corrective measures to prevent future occurrences.

Ensure that all incidents are reported to the relevant authorities in accordance with regulatory requirements.

8. Collaboration and Communication:

Liaise with contractors, supervisors, workers, and external authorities to ensure all safety, health, and environmental standards are upheld.

Provide safety and environmental briefings to workers, supervisors, and stakeholders to keep them informed of the latest developments and expectations.

Act as the point of contact for regulatory inspections and audits related to safety, health, and environmental matters.

Requirement:

· At least 2 years of relevant experience in construction industry preferably 2 years with developer/main contractor

· Must be a registered Workplace Safety and Health Officer with MOM and have been practicing as WSHO for at least 2 years in Experience

· Has developed a Risk Management Implementation Plan (bizSAFE Level 2) or equivalent

· Good communication skills

· team player

Job Scope: To contribute as part of a process safety team on a proposal / project, in collaboration with different departments and process safety section, to manage Major Accident Hazards (MAHs) and prevent and mitigate Major Accident Events (MAEs) throughout the lifecycle of the facility.

Responsibilities:

• Develop / Support the development and review of HSSE Design Philosophy, and other process safety-related philosophies. Provide guidance to the proposal / project for compliance to company standards, client and regulatory requirements of safetyrelated systems.
• Develop / Support the development of scope of work, perform safety consultant technical bid evaluation, participate in workshops, plan, review and deliver safety studies / deliverables. Deliver complete, correct, and on-time safety studies and deliverables to the proposal / project, demonstrating risks are As Low As Reasonably Practicable (ALARP).
• Organise Bow-Ties workshops, define SCEs, communicate performance standards requirements, review SCE design, manage tracking and review of EPCI assurance tasks, as instructed by the Principal Engineer, to ensure that safety critical elements are designed, procured, constructed, commissioned, and installed in accordance with performance standards for the prevention and mitigation of MAEs.
• Coordinate and manage risk consultant/subcontractor to ensure the risk of the facility is properly assessed in accordance with the scope of work and methodology, in a timely manner and on budget.
• Collect risk assessment input data, review risk assessments, prepare deliverables, review other discipline deliverables, and collaborate with other disciplines and departments, as instructed by the Principal Engineer or assigned engineer. Issue accurate deliverables, minimizing mistakes and maximizing efficiency. Minimise / manage deviations from company standards, client and regulatory requirements of safety-related systems.
• Contribute to the achievement of Project / Engineering Performance Goals defined for the year / project.
• Collaborate with the proposal / project team, consistently check deliverables for compliance, attend / support audits and resolve non-conformities to deliver a regulatory compliant installation. Minimise non-conformities and delays to first oil.
• Communicate professionally with the client, provide responses to client comments, as instructed by the Principal Engineer, such that the client is satisfied that hazards are managed appropriately.
• Collaborate with the project team to ensure that changes are managed in accordance with the Management of Change Procedure and their impact on risk are properly evaluated.
• Identify and communicate lessons learnt for improved management of MAHs and project execution.
• Ensure technical competencies are met and guide the development of process safety engineers to improve technical competency and soft skills.
• Comply with Group Policy, Code of Business Conduct and Ethics at all times.

Requirements:

• Minimum 7 years of relevant working experience in Process Safety engineering in the oil and gas sector for a bachelor’s degree in Chemical / Environmental / Mechanical Engineering, or minimum 6 years of relevant working experience for a master’s degree, or minimum 12 years of relevant working experience for a diploma holder.

Interested applicants are welcome to submit your MS Word resume to:

[email protected]

EA Personnel: R1109773

EA Licence: 07C3676

oles & Responsibilities

1. To carry out all responsibilities of a Site Supervisor in a Construction site.

2. Ensure a consistently high standard of work is produced in accordance with specification and quality standards through regular quality inspections with sub-contractors.

3. To oversee daily operation at site. Direct and supervise day to day operations of sub-contractors ensuring appliance of common operational procedures.

4. Ensure material requisitions are issued in adequate time to achieve the Construction Programme.

5. Schedule, control and monitor all sites and materials on a weekly basis. Ensure all work is completed to programme.

6. To ensure that workers comply with all safety measures required. Require to carry out the effective implementation of work safety programme.

7. Report and assist Project Director and relevant Personnel. Fulfil the role of Temporary Works Co-Ordinator when required.

8. Liaise with sub-contractors Manager/Project Manager, Site Manager/Agent, and Contract Surveyor regarding cost control, waste management, variations and confirmation of instructions.

9. Create and maintain good relations with clients, design teams and neighbours as well as any other stakeholders.

10. Responsible for the upkeep of documentation on project matters Assist to ferry workers to respective sites.

ROLES & RESPONSIBILITIES

a. Supervise construction workers to ensure proper execution of building structural works

b. Prepare work schedule and arrange workers' assignment

c. To oversee construction projects include coordinating with Maincon

d. Able to resolve construction site issues

e. To conduct quality check of works

f. Follow maincon to inspection of reinforced concrete works

g. Maintain site safety and ensure that safety requirements are enforced

h. Prepare rebar bending schedule and submit to maincon

i. To order site materials and equipment

j. To provide work training to new workers

k. To be able to carry out site works when necessitated

Job Description:

· Advise management on EHS legal and other requirements,, including their changes.

· Ensure provision in legal requirement such as WSH Act and WSH (Construction) Regulations are complied with.

· Review company’s safety performance and formulate measures to achieve continuous improvement.

· Review company safety resources and provide recommendations to management to meet EHS requirement.

· To arrange with senior management and laisse with projects to conduct monthly safety site walk.

· Fulfill any additional responsibilities assigned by the Project/Site Manager.

Requirements:

· Accredited WSHO and ECO with a minimum of 5 years of experience in the relevant field.

· Possess a Diploma in Engineering or Environmental Health and Safety.

· Demonstrated proficiency in organizational, interpersonal, and leadership skills.

· Capable of leading WSHOs, offering supervision, guidance, and instructions to all safety personnel.

· Sound understanding of government regulations pertaining to Occupational Safety, Health, and Environmental domains.

· Well-versed in OSH/ISO documentation.

Attachment Description:

The trainee must ensure the health and safety of employees in the workplace.

Specific Responsibilities:

1. Creating and putting into place policies and programs to mitigate risk and promote a safe workplace culture.

2. Identifying potential hazards and ensuring safety measures are in place .

3. Providing training on safety protocols and procedures to employees, management, and the general public.

4. Ensuring compliance with health and safety regulations and initiating enforcement procedures when necessary.

5. Responding to and investigating accidents, injuries, and complaints from employees and employers. 6. Keeping records of accidents and incidents, and preparing reports for managers.

7. Overseeing emergency procedures like fire drills and first aid.

8. Communicating with employees and decision-makers to promote a culture of health and safety.

Technical Skills and Competencies:

1. Risk Assessment

2. Coordination of emergency procedures / Coordination and Collaboration 3. Safe working Techniques /Enforce safety policies

4. Policy development

5. Compilation of safety programs

6. Excellent communication skill

Mature Mid Career Individuals- $2, 800

This position is open for mid career individuals (Mature, 40 years and above).

Mid career individuals from any qualification level can apply.

Visit www.ppsjob.com.sg

Job Responsibilities

Handle quotation, cost estimation and pricing with contractors

Prepare & award subcontracts for projects

Manage all project cost control from initial calculations to final figures

Evaluating Contractor’s proposal and specifications

Prepare tender submission, handle progress claims & progress payments, VO & finalization of accounts

Coordination on all documentations required by regulations with subcontractors to ensure smooth progress of works

Review CS, architectural and M&E drawings to ensure special requirements and annotations are taken into consideration and complete in the tenders

Consult and align Construction team on the scope of tender submission; highlight and seek agreement on special requirements or unusual scope

Monitor deduction for materials bought on behalf of subcontractors/suppliers

Job Requirements

1-5 years working experiences in general building construction industry

min Diploma / Degree in Quantity Surveying & relevant qualifications

Proficiency in Microsoft Excel, Word, Power Point & AutoCAD drafting

Able to communicate fluently in English & Mandarin (in order to liaise with the English & Mandarin speaking associates)

Good interpersonal and communication skills to work as a team

Ability to communicate with people at all level and be meticulous with an eye for details

5.5 days (9am - 6pm) (Alternate Saturdays)

• Preparation of Bills Of Quantities and cost estimation during tender and post contract for construction project

• Monitoring and updating project budget including cost control and forecasting all project related costs

• Procurement and negotiation with Subcontractors and suppliers to obtain the best prices and terms for tender and awarded Project.

• Preparation of Subcontract agreement including maintaining proper documentation.

• Certification and preparation of subcontractor interim payment certificate/ final account including maintaining accurate and proper payment records.

• Familiar with construction condition of contract ie SIA and PSSCOC

• Attend to tender briefing/site showround and project site meeting

• Certification in quantity surveying or construction management

• 5 to 7 years working experience on various construction project including residential, commercial, upgrading and A&A sites.

• Proficiency with BIM, CAD and relevant quantity surveying takeoff software and tools

• Ability to work independently

• Developing and planning engineering strategies
• checking on paper and site work progress
• conducting project safety briefing
• controlling materials order and usage
• supervising construction team
• increasing company's work quantity and quality
• ensure that structure are constructed in a safety and sturdiest manner
• reporting to director and PM
• liaise with consultants, conractors and authorities
• miscellaneous duties and adhoc works
• Main Contractor and HDB project

Job Description

• Lead Project planning and project management.

Oversee project execution, monitor site progress

and ensure on-time completion of projects

• Ensure compliance with safety regulations and latest

WSH Act provisions at all times

• Ensure cost control and project completion within

budget, utilization of resources and schedule

• Liaise with client's representatives with regards to all

site matters, attend site meeting if required.

• Delegate tasks and responsibilities to appropriate

personnel.

• Recognize and solve potential problems and

evaluate project/program effectiveness.

• To lead and mentor the team by setting in place

guidelines and procedures, providing advice and

supervision

• Identify and resolve operational problems and

minimize delays

• Ensure that organization and government standards

on safety are met and ensure customer safety and

quality specifications are consistently met

• Coordinate with the clients, sub-contractors and

consultants on all project matters

• Familiar with Authority submissions and regulatory

requirements

• Ensure site team of engineers, supervisors, foremen

and workers comply with client and regulatory

requirements

• To assist management in monitoring the

effectiveness of the risk control measures

• To recommend appropriate risk control measures to

reduce or eliminate the risk identified assessment

• Together with QS department to award sub

contractor

• Assist in ac-hoc tender for technical proposal

submission

• All other ad hoc duties assigned

Job Requirement

• Diploma/ Degree in Civil Engineering / Architecture

or equivalent

• Good communication and organizational skills

• Able to work independently with minimum

supervision as well as in a team environment

• Able to work under pressure with high initiative and

meeting timelines

• At least 1-3 years of relevant experience in

Construction Industry

• Able Understand & doing AutoCAD Drawing

Others:

• 5.5 Working days per week

• 9am – 6pm

Job Description & Requirements

Civil engineers create, improve and protect the environment in which we live. They plan, design and oversee construction and maintenance of building structures and infrastructure, such as roads, railways, airports, bridges, harbours, dams, irrigation projects, power plants, and water and sewerage systems.Civil engineers plan, design, and supervise the construction and maintenance of building and infrastructure projects. These projects may include facilities, bridges, roads, tunnels, and water and sewage systems.

• Drive sales through the growth of existing clients
• Generate new business opportunities
• Implement a lead generation strategy to get construction leads
• Develop new relationships within the residential and commercial construction communities
• Master the construction sales process at their company
• Perform all aspects of selling/closing a project
• Complete documents on time, such as customer proposals and construction bids, change orders, weekly call reports
• Achieve/exceed new sales call targets per month within a specified territory
• Familiarize themselves with architectural specifications and construction design elements
• Generate new sales opportunities by cold calling, networking and client/associate referrals
• Attend trade shows to represent the organization and engage in other marketing activities
• Inspect, scope, photograph and estimate projects
• Maintain acceptable profit margins
• Solicit project documents and information
• Follow up on all outstanding RFPs and estimates with clients
• Maintain sales quota for each quarter and year as provided

Additional Information:

• Minimum 5 years Experience in the sales and construction industry.
• Degree in Business, Sales & Marketing or Building Construction
• Pleasant, articulate and eloquent
• Sales driven
• Good with numbers and analytical

Job Description & Requirements

• Monitor and manage day-to-day operations of projects, or function, including developing and monitoring budgets, coordinating activities with other sub-contractors
• Plan the work schedule and efficiently organize the site facilities in order to meet an agreed program of deadlines
• Liaise with consultants and/or sub-contractors engaged on the project
• Attend regular meetings with owner/client/contractors/sub-contractors and ensure the progress is on schedule
• Resolve any unexpected technical difficulties and other problems that may arise
• Monitor and ensure subcontractors comply with specified requirements
• ldentify and comply with all applicable statutory regulatory requirements related to project
• Identify possible risks to project and stakeholders as well as create contingency plans to mitigate these risks
• Respond swiftly to work delays, emergencies and other problems
• Clear communication to external parties including client, subcontractors, consultants, vendors etc. on project needs, requirements and schedule by means of daily construction oversight
• Review all method statement of the activities ensuring safe execution and maximization of resources used for job efficient
• Prepare monthly site report updating the latest progress and planning to achieve the project milestone
• Complete task as assigned by Project Manager and Project Director

Requirement:

• Candidate must possess at least Bachelor's Degree in Civil Engineering
• At least 10 years of engineering experience in the related field is required for this position
• At least 5 years of experience in managing civil and infrastructure construction work for projects of similar scale, complexity and nature of work
• Work as Team leader, leading team on project requirements and target achievement
• Acting as rigorous preson on Identify possible risks in project

· Oversee and direct construction projects from conception to completion

· Review the project in-depth to schedule deliverables and estimate costs

· Oversee all onsite and offsite constructions to monitor compliance with building and safety regulations

· Coordinate and direct construction workers and subcontractors

· Select tools, materials and equipment and track inventory

· Meet contractual conditions of performance

· Review the work progress on daily basis

· Prepare internal and external reports pertaining to job status

· Plan ahead to prevent problems and resolve any emerging ones

· Negotiate terms of agreements, draft contracts and obtain permits and licences

· Analyse, manage and mitigate risks

· Ensure quality construction standards and the use of proper construction techniques

· More than 5 years working experience in construction management

· Advanced knowledge of construction management processes, means and methods

· Expert knowledge of building products, construction details and relevant rules, regulations and quality standards

· Understanding of all facets of the construction process

· Familiarity with construction management software packages

· Competent in conflict and crisis management

· Leadership and human resources management skills

· Excellent time and project management skills

· Minimum BS degree in construction Engineering