Job Description

• Assist the Architect to coordinate design detailing between Clients and Consultants
• Coordinate all architectural drawings and works, submit and update status of shop drawings, samples, mockup, and materials as well as supervise work progress to alleviate conflicts, dispute and abortive work
• Review project specifications, tender clarifications and construction drawings for contract and procurement management
• Ensure compliance with architecutral specifications and achieve quality aspect of architectural works without deviation to authority requirements
• Responsible to the project stakeholders for accomplishing the project objectives within the constraints such as project scope, time, cost and quality of the project.
• Prepare any necessary construction method statement and technical proposal to ensure smooth transition of works
• To coordinate architectural work, prepare estimates, interpret plans and inspect construction sites
• To coordinate architectural and consultant drawings to ensure consistency in construction documents
• Resolve all site architectural issues (i.e. drawings discrepancies, method statements or correspondences) and implement the right methods to ensure quality and productivity, using BIM software or equivalent
• To liaise with client, consultant and specialist subcontractors for project execution if required
• Arrange and attend joint site inspections with all system wide and in-house contractors if required
• Review and report on the progress of architectural works
• Liaise and work closely with the civil construction team and follow the construction progress closely
• Assist in ensuring that all architectural construction requirements are incorporated into the site construction
• To assist in construction administration process by attending site visits if required
• Compile and handover of architectural documentations including as-built drawing submissions
• To ensure the project complies with regulations, which includes revising the project design as necessary to achieve client satisfaction
• Adhere to safety and health regulations and aim for zero accident in the workplace
• Ensure safety and housekeeping is to maintained to the highest standard
• Any other ad-hoc duties as and when assigned

Job Requirements

• Degree in Architecture, and as a registered architect, with minimum 6 years of local working experience OR
• Diploma in Architecture with minimum 8 years of local working experience
• Proficient in project management and architectural trades
• Proficient in trades coordination via Revit/Bentley platform
• Eye for details in architectural shop drawings
• Excellent team player, good interpersonal skills and a “can-do” attitude
• Ability to multi-task in a fast paced and dynamic environment
• Completed min 2 CONQUAS building project
• Preferably with Design & Build Building experience

• To repair bins, fabricate bins, welding of the bins and support on all mechanical equipment, pumps, conveyors, gearbox and etc in plant as per schedule and upon breakdown
• To do in house welding, fabrication and plumbing works as per requirements by operation
• Attend any mechanical breakdown immediately and to run back the plant
• Installation, modification and fabrication of new equipment & machines in plant needed by operation
• To minimize equipment break down and down time, by doing proper and effective maintenance & repairs by problem identification & problem solving
• Other ad-hoc duties as assigned

A Project Manager in the construction industry is responsible for overseeing and coordinating all aspects of construction projects, ensuring they are completed on time, within budget, and to the required standards.

1. Develop comprehensive project plans, including timelines, milestones, and deliverables.
2. Use project management tools (e.g., Primavera, MS Project) to create schedules and track progress.
3. Define project scope and establish objectives aligned with client requirements.
4. Prepare and manage project budgets, ensuring cost efficiency.
5. Monitor expenditures and address any cost overruns promptly.
6. Negotiate contracts with vendors, suppliers, and subcontractors.
7. Lead and manage project teams, including engineers, architects, contractors, and other stakeholders.
8. Assign roles, responsibilities, and tasks to team members.
9. Foster collaboration and resolve conflicts among team members.
10. Serve as the primary point of contact between clients, contractors, and internal teams.
11. Provide regular project updates, progress reports, and presentations.
12. Address client concerns and adjust project plans as necessary.
13. Ensure all construction activities meet industry standards, building codes, and client specifications.
14. Conduct site inspections to verify work quality and adherence to plans.
15. Implement and enforce quality control measures.
16. Identify potential risks (safety, financial, legal) and develop mitigation plans.
17. Monitor and manage changes to project scope, schedule, and costs.
18. Ensure compliance with safety regulations and protocols on-site.
19. Review and manage contracts, ensuring all terms and conditions are met.
20. Oversee daily on-site operations and resolve any issues.

Qualifications

• A degree in Civil Engineering, Construction Management, or a related field.
• At least 5 Years of working experience in the related field.
• Experience in HDB/MOH project.
• Strong communication and negotiation skills.
• Expertise in project management tools and methodologies.
• In-depth knowledge of construction processes, materials, and regulations.
• Problem-solving and decision-making abilities.
• Leadership and team management.

• Developing new product according to development requests and involve in improvement of existing products.
• Look out for new trends and new products in the market.
• Control Food Cost
• Daily ordering of food and supplies.
• Inventory
• Ensure that food preparation areas are clean and hygienic, meeting company SOP/SOC
• Keep up to date with current promotions and new items in menu.
• Ensure the procedures for supplies, equipment, and work areas are in compliance with safety standards and SOP.
• Assist in keeping food wastage to minimum, through correct product measurements.
• Maintain good knowledge on standard food preparation through training, and training of Junior Kitchen team.
• Always adhere to all company policies and procedures

1) GENERAL WASTE COLLECTION (CONSTRUCTION)

2) SINGAPORE CLASS 4 LICENCE

3) AT LEAST 3 YEARS SINGAPORE EXPERIENCE IN OPERATION OF HOOKLIFT TRUCK

4) ABLE TO SPEAK IN ENGLISH AND TAMIL

5) ABLE TO WRITE IN ENGLISH

6) MUST KNOW HOW TO MAINTAIN THE TRUCK AND HOOKLIFT.

7) PROPER HANDLING OF OPEN-TOP CONTAINER (BIN)

• Lead and manage a team of QS in the administration and review of procurement and contract management
• · Responsible and lead the team on evaluation and preparation of sub-contractors' claims and issuance of payment response within stipulated timeframe (SOP Act)
• Allocate tasks to QS and provide effective supervision
• Review contract documents and provide cost estimates on tenders
• Oversee and manage main contract progress claim and subcontract payment including variation claim
• Resolving contract disputes and contract claims, assessing entitlement for extension of time and loss/expense claim
• Oversee the management of document control and distribution of drawings, specifications, and all other relevant documents.
• Communicate contract-related information to all stakeholders
• Ensure proper documentation of additional works, alterations or design changes, and lead the team in preparing variation orders
• Advise and administer Extension of Time claim
• Ensure timely finalisation of main contract and subcontract
• Prepare and monitor project cost budget, cash-flow for project, track changes in design/construction work, variations and adjust budget projections accordingly
• Able to independently lead and manage project

Requirements

• Bachelor’s Degree in Quantity Surveying / Construction Management / Civil Engineering or equivalent
• Minimum 8 years relevant experience in project tendering, contract negotiation, administration and/or management
• Excellent communication and negotiation skills, analytical mindset, problem solving abilities

Responsibilities:

• Assists in planning, controlling and coordinating of mechanical and electrical works
• Checks discrepancies between project drawings and technical specification
• Liaises with site engineers to ensure a smoothly workflow
• Conducts M&E coordination meeting
• Schedules and monitor M&E work progress
• Monitor M&E works documents and shop drawings coordination
• Liaises with clients, consultants, subcontractors and suppliers
• Negotiate approval for M&E changes to the project

Job Requirements:

• Diploma / Degree in Engineer or equivalent
• Mechanical / Electrical Engineering or equivalent
• Familiar with construction site activities
• Co-ordinate, liaise & communicate with people of all levels
• Minimum 3 years relevant experience in building construction
• Able to work under tight schedules

Applicants are to email to [email protected]

Responsibilities:

• Good technical and project management abilities.
• Strong ability to develop, plan and organize resources efficiently.
• Communicating plans and challenges and options in engineering issues and solutions to various stakeholders and Clients alike.
• Inspiring a team of different nationalities and cultures.
• Professional integrity and exemplary conduct at all times.
• Proven problem-solving and achievements.
• Comfortable at work site conditions.
• Site supervision and able to co-ordinate well with sub-contractors, RE and RTO.

Requirements:

• At least 3 year(s) of relevant working experience in construction is required for this position.
• Candidate must possess at least a Degree in Engineering (Civil/Structural) or equivalent.
• Preferably Managers specializing in Engineering - Civil/Construction/Structural or equivalent.
• Knowledge in Microsoft project.
• Full-Time positions available.

Applicants are to email to [email protected]

• Need experience in Architectural metal works, metal cladding, Ceiling panels, Glass Wall, Glass Railing, Sky lights, Stainless Steel & Aluminium works.
• Planning of shop drawings submission schedule to control the sequence and time frame for development of shop drawings.
• Prepare documents/samples submission schedule to control the sequence and timing for samples submission/approval with preferable float time allowed for procurements.
• Co-ordinate all related design matters with Consultants/ Client.
• Ensure main contract and sub-contract designs co-ordinated fulfil all design requirements.
• Co-ordinate with Contract team for any formal and informal changes made by Consultants.
• Co-ordinate with Contract team for proper sequence of sub-contract awards.
• Resolve technical problems for team.

Interested applicants, please apply online or send your resume in WORD format to [email protected] & [email protected]

Thank you for your application but we regret that only shortlisted candidates will be notified.Design / Technical Manager

• Need experience in Architectural metal works, metal cladding, Ceiling panels, Glass Wall, Glass Railing, Sky lights, Stainless Steel & Aluminium works.
• Overall management for the project with respect to contractual, budget, resources, design, procurement, construction, quality and safety.
• Lead the project team for the implementation and execution of works as according to planned schedule.
• Coordination and monitoring of progress amongst various subcontracting works.
• Liaise closely with clients, architects, consultants, subcontractors through regular meetings to resolve administrative, design and contractual issues and updating of project progress report.
• Conduct regular site safety meeting and to implement safe site working condition and environmental control measures.
• Tender in Building projects.
• Method Statement.
• Technical Submission.
• Evaluation.
• Experience in Commercial, Building projects.
• Posses good leadership and organizing abilities.

For interested applicants, please apply online or send your resume in WORD format to [email protected] & [email protected]

Thank you for your application but we regret that only shortlisted candidates will be notified.

• Need experience in Architectural metal works, metal cladding, Ceiling panels, Glass Wall, Glass Railing, Sky lights, Stainless Steel & Aluminium works.
• Forecast , Plan and schedule production orders.
• Material planning, Requisition of materials and maintenance of factory materials.
• Responsible for order confirmation based on material and capability availability.
• Plan, control and coordinate with purchasers on material deliveries to avoid high stock inventory.
• Monitor material availability for production continuity.
• Periodically reporting.
• Diploma/ degree holder in Supply Chain Management.

For interested applicants, please apply online or send your resume in WORD format to [email protected] & [email protected]

Thank you for your application but we regret that only shortlisted candidates will be notified

• Need experience in Architectural metal works, metal cladding, Ceiling panels, Glass Wall, Glass Railing, Sky lights, Stainless Steel & Aluminium works.
• Forecast , Plan and schedule production orders.
• Material planning, Requisition of materials and maintenance of factory materials.
• Responsible for order confirmation based on material and capability availability.
• Plan, control and coordinate with purchasers on material deliveries to avoid high stock inventory.
• Monitor material availability for production continuity.
• Periodically reporting.
• Diploma/ degree holder in Supply Chain Management.

For interested applicants, please apply online or send your resume in WORD format to [email protected] & [email protected]

Thank you for your application but we regret that only shortlisted candidates will be notified

Responsibilities

• Able to use primavera 6 and Microsoft project for project scheduling
• Gather pertinent data, perform related calculations and analyse schedule impact, include critical path method (CPM).
• Produce and maintain the good quality work on project schedule, inclusive frequent updating project schedule with physical site progress
• Able develop progress reports, daily, weekly and monthly basis (e.g., overall S-curve, plan vs actual table)
• Proactively engage and communicate with Construction Team on schedule matters for developing quality schedule and updated the status
• Determine project requirements and estimate resources by allocating correct resources such as manpower, materials and equipment.
• Coordinate between interdisciplinary for logical connection among activities.
• Prepare construction schedules, resource and cost loaded with governance of major project milestones stated in the project contract.
• Oversee the master schedule and highlight deviations that critical enough to pay attention to supervisor/project management team.
• Coordinate with Contract Engineer on project progress claims matters.
• Interface with sub-contractors and client’s representative to finalise the baseline schedule.

Requirements

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Environmental/Health/Safety), Logistic/Transportation or equivalent.
• At least 4 year(s) of working experience in the related field is required for this position.

Roles & Responsibilities

• Provide technical advice and support for daily operational issues.
• Perform inspections of welding, structural fabrication, and piping systems to ensure compliance with industry standards.
• Review piping isometric drawings and verify that materials meet specifications.
• Coordinate and oversee NDT activities, including radiographic testing (RT), and ensure accurate results through proper witnessing and review.
• Conduct thorough inspections and assessments during plant shutdowns, documenting findings and reporting discrepancies.
• Assist in the development and implementation of quality control procedures.
• Participate in safety meetings and ensure compliance with health and safety regulations.
• Maintain accurate and organized records of inspections, reports, and certifications.
• Collaborate with engineering and construction teams to ensure design specifications are met.

Qualifications:

• Minimum of 3 years of experience in plant inspections or related fields, especially during shutdowns.
• Valid certification in at least one API area (API 510, API 570, or API 653).
• Knowledge and experience in welding inspection, structural fabrication, and piping materials.
• Proficient in MS Office and CAD/CAM software.
• Familiarity with industry standards and codes (e.g., ASME, ASTM).
• Experience with non-destructive testing methods (UT, PT, MT, VT) is a plus.
• Strong communication skills, both written and verbal, for effective collaboration with team members and clients.
• Ability to work in a fast-paced environment and manage multiple priorities.

Construction company requires an EHS OFFICER.

Construction company requires an EHS OFFICER.

Construction company requires an EHS OFFICER.

Construction company requires an EHS OFFICER.

Construction company requires an EHS OFFICER.

Construction company requires an EHS OFFICER.

Construction company requires an EHS OFFICER.

Able to read construction drawings, know well the skill of formwork , rebar, concreting, survey.

To lead the installation teams at construction sites to plan and execute works according to the project schedule;

To plan the manpower deployment require for the site works;

To ensure efficient utilization of manpower, raw materials and consumables for our construction projects at construction sites;

To oversee the works and resolve any technical issues/ difficulties that may arise on constructions sites;

To ensure the works at construction sites carried out are complying with safe work procedures;

To report to project team on work progress at construction sites;

To liaise with main or sub-contractor for coordination work and installation,able to handle complaints and provide regular feedbacks.

To manage all on-site matters and assist Technical issues.

Any other duties as assigned by the Project Manager from time to time.

Accept working outdoors,the minimum working hours are from Monday to Saturday.

Roles & Responsibilities

JOB DESCRIPTIONS:

• Prepare project tender submission including bills of quantities, check tender drawing, material specifications, prepare and submit the P&S plan, shop drawing, & other required documents;
• Prepare and submit monthly progress claims, VO, finalization of accounts;
• Responsible for measurement of quantities and cost estimation;
• Liaise with Managers, Team Members, Customers, Sub-Contractors and Suppliers;
• Purchasing and inventory management;
• Administrative tasks and ensure the office runs smoothly and work towards a good place to work for the team;
• Perform other duties as assigned.

REQUIREMENTS:

• Minimum Degree and above in Civil Engineering/Mechanical Engineering or equivalent.
• 1-2 years of working experience in QS or related construction field
• Able to work independently with minimum guidance and under pressure to meet tight schedules.
• Good team player with strong interpersonal and communication skills.
• Proficiency in AutoCAD
• Able to start work immediately is an advantage

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

• Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.
• Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.
• Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.
• For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.
• Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Diploma/Bachelor's degree in Civil & Structural Engineering
• Mininum 2 - 5 years' experience working in construction industry
• Preferably with HDB experience

Job Description

a) Report to the Manager/Team leader as shown in the organization chart. Responsible for the coordination and control of technical matters, quality implementation and site supervision works.

b) The detailed duties and responsibilities includes but not limited to the following:

• Coordinate with all the parties including sub-contractors and consultants to solve and coordinate technical issues, production of drawings and ensure proper transmission of data to all parties involved. Ensure that the detailed schedules of drawing production and site progress are met.
• For quality management, the coordinator is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Supervise site works according to the quality and EHS requirements.
• Handle all inspections and handing over process with the final objective of achieving customer satisfaction and high Conquas/QM score.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Degree in Architecture / Engineering
• Minimum 2-3 years' experience in BIM Drafting (Architectural or M&E)

Job Descriptions:

• Conduct surveys on land sites and properties
• Examine previous records and evidence to ensure data accuracy
• Research and design methods for survey processes
• Use equipment and tools to accurately measure land features (e.g. longitudes, latitudes)
• Build maps, sketches, and charts
• Supervise and provide guidance to field staff
• Purchase and maintain equipment
• Report on survey results and present findings to clients
• Collaborate with engineers and architects on several projects

Requirements and Skills:

• Previous experience as a surveyor or in a similar role
• Working knowledge of GPS and GIS
• Tech savvy, including familiarity with CAD software
• Aptitude in math and problem-solving
• Attention to detail
• Great organizational and leadership skills
• Degree in Civil Engineering or a similar field
• Valid certificate is required

Additional Information:

• Working Location: 65 Jalan Lam Huat, Hw Point @ kranji Singapore 737652
• Working Days: 6 Days
• Working Hours: 8:30am to 5:30pm (Mon to Sat)

Job Responsibilities:
Plan and execute ACMV projects

Oversee day-to-day site activities (installations, inspections, progress), daily & routine maintenance

Lead and coordinate FM project teams

Manage project schedule, cost and quality and site safety.

Ensure successful, cost-effective and timely project delivery.

Interface and liaise with customers, consultants and contractors.

Manage subcontractors and suppliers to ensure timely delivery of services and materials.

Project meetings and reviews to ensure targets are met.

Requirements:

Min Diploma / Degree in Engineering (Mechanical / Electrical Engineering / Construction / Building related)

With years of project management experience.

Able to define project work scope, requirements and specifications, and identify, allocate resources for executing the project from start to completion.

Responsibilities:

• Oversee and effectively maintain the M&E systems and supervise the M&E team in carrying out duties

• Ensure all projects, preventive maintenance works and SOPs are carried out in excellent quality within the schedule timeline and budget and set routine maintenance

• Perform site planning, coordination and inspection that related to M&E and facilities

• Responsible in preparing tender specification & post contract and renovation projects

• Oversee and effectively maintain the M&E systems. Analyse faults speedily and recommend holistic, sustainable and cost-effective solutions to the client

• Ensure accurate records and progress reports is prepared on timely manner

• Ensure proper arrangement of site organization and workforce management

• Conduct regular meetings with FM teams, clients, consultants and subcontractors

• Liaise with the equipment vendors at a technical and professional manner so that equipment faults escalation can be resolved within the shortest possible time

• Ensure the operation teams comply with client & regulatory requirements.

• Any other ad-hoc duties as assigned

Requirements:

• At least 7 years of experience in related ACMV, and Electrical or equivalent.

• Minimum Diploma/Degree holder in Mechanical Engineering, Electrical Engineering, ACMV or equivalent.

• Possess strong analytical and organizational skills with the ability to work independently

• Proficiency in MS Office.

• Ability to work under pressure in a complex environment.

1. Able to work independently on company admin and account relationed works

2. Good working atitude

3. Must have related experience for Interior designing and Carpentry manufacturing industry

4. Able to correspond with Company working staff

5. Must able to use Microsoft Excel

• Perform painting tasks, including preparing surfaces, applying paint, and finishing to ensure a quality appearance.
• Select and mix paint colors to achieve the desired shade and consistency.
• Clean designated areas, including offices, restrooms, and common areas, to maintain cleanliness and hygiene.
• Handle and dispose of cleaning materials safely and according to guidelines.
• Inspect areas for cleanliness and report any maintenance or repair needs.
• Maintain painting and cleaning equipment in good working condition.
• Follow all safety protocols while performing painting and cleaning tasks.
• Assist with other general maintenance duties as assigned by supervisors.
  • Prepare walls and other surfaces for painting by scraping, using sandpaper, removing old paint etc.
  • Fill cracks and holes with appropriate material (e.g. plaster) Mix paint and other materials to prepare the right color or texture
  • To carry out spray painter process/tasks, including preparation and operations of spray system and setting up of parts on appropriate machines
  • To perform production and spray related tasks as and when assigned by immediate supervisor
  • Ensure works are carried out according to schedules and are on target to completion.
  • Take and adhere to all health and safety precautions
  
  Requirement:
  • At least 3 Year(s) of working experience in the related field is required for this position.
  • Able to work independently.
  • Good communication skills.
  • Able to withstand the outdoor harsh weathers.
  • Able to work overtime to complete the project on-time.
  • Able to follow the supervisor's daily instructions on-site.
  • 7 days work week
  • 8.15am to 6pm

ABOUT SEMBCORP INDUSTRIES

Sembcorp Industries (Sembcorp) is a leading energy and urban solutions provider, led by its purpose to drive energy transition. Headquartered in Singapore, Sembcorp delivers sustainable solutions to support energy transition and urban development by leveraging it sector expertise and global track record.

For more information, please visit www.sembcorp.com.

Purpose and Scope:

Architectural planning, coordinating the drawings, reviewing of project specifications and technical clarifications

Key Roles and Responsibilities

• Monitoring of sample submission, update status of drawings and materials approval status of drawing, etc
• Perform site supervision for architectural works
• Supervision of architectural works carried out by sub-contractors
• Coordinate with consultants and sub-contractors
• Ensure the smooth completion of the project

Qualification, Skills and Experience:

• Diploma/ Higher Nitec in Architecture/ Civil Engineering or its equilvalent
• Some knowledge in the use of BIM tools for design / construction documentation.
• Minimum 5 years’ relevant experiences in the construction industry
• Due to the sensitive work nature, only Singaporean applicants will be considered.

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

• Institution-first Mindset – Put the interest of the Group ahead of individual interests.
• Collaboration – Deliver through collaborating across markets, businesses and functions.
• Accountability – Hold team and self accountable to deliver on our commitments.