Job description

• Manage, initiate, and assign workers and equipment schedules and activities.
• Allocating work to workers, setting production targets and communicating precise instructions.
• Effective employee relations.
• Respond to employee concerns promptly and work with Management to resolve.
• Monitor and initiate training activities in their department and all related documentation.
• Ensure all works are perform in safe manner and environment.
• Participate in meetings.
• Conduct periodic workers appraisal to Management.
• Perform daily safety inspections.
• Achieve tasks as assigned by Management.
• To resolve construction discrepancies.
• Plan workers rest days and leave to suit construction schedule.
• Change work assignments and schedules to maintain and improve efficiency as and when necessary.

Requirements

• Ability to grasp knowledge to drawings, specifications and requirements to ensure all works completed by workers.
• Ability to identify structures/ architectural and locate dimensions in scale drawings and requirements.
• Possess good communication skills to communicate with Main Contractor, Managers and Supervisors and other trades to explain progress of jobs and to obtain instructions and tasks.
• Possess coaching skills to train employees and less experienced workers to perform tasks as prescribe by Management.
• Organize and lead meetings with workers.
• Coordinate job tasks with those of junior workers, co-workers, Main Contractors and Sub Contractors.
• Work to achieve Management KPI.
• Ability to operate and troubleshoot equipment.
• Continuous learning to keep up with new technologies, new products, new information and regulatory changes within industry.
• Knowledge of applicable site and safety requirements.

Set goals for performance and deadlines in ways that comply with company’s plans and

vision and communicate them to subordinates

· Organize workflow and ensure that employees understand their duties or delegated tasks

· Monitor employee productivity and provide constructive feedback and coaching

· Receive complaints and resolve problems

· Maintain timekeeping and personnel records

· Pass on information from upper management to employees and vice versa

Ensure compliance of operations with Workplace Safety and Health/Environmental Control regulations and statutory requirements

Follow up with the committee site walk inspection findings for WSH Officer to close up the report and assisting WSH Officer on incident/accident investigation.

Responsible for daily checklists are properly documented and carry out mass toolbox meeting once a week.

Coordination with relevant site in-charge on improving the worksite safety and cleanliness.

Ensure supervisors and workers are following safe work procedures compliance.

Assist WSHO to organize monthly Safety Committee meetings and put up safety reports, including safety issues

Compiles all relevant reports and records and carry out daily safety inspection

Supervise all workers in providing safety measures and procedures in accordance with MOM Regulations

Any other ad-hoc duties assigned by superior from time to time

• Coordinate and supervision of structural technical aspects of construction Supervise site building works
• Liaise with Consultants, Sub-contractors
• Handle any other ad-hoc duties and tasks assigned
• At least 5 years experience in Construction
• Know rebar and timberform work and can read drawing

Job Description

• Conduct briefing to all General Cleaners
• To conduct daily inspections of cleaning operations assigned
• Responsible for the daily preparation of attendance adjustment form
• Responsible for all discipline of the staff
• To ensure that all work place safety and health requirements
• Require to conduct a proper On-the-Job training to all new staff
• Require to assist in recruitment plan

Requirements

• Candidate should possess at least Secondary education.
• At least 4 years of relevant working experience is required for this position.

JOB DESCRIPTION :

•Assist in BIM coordination offsite and onsite implementation.

•To produce effective model to meet site needs

•Produce the details shop drawing through the BIM model for site implementation.

Requirements:

•Diploma

•At least 2 years working experience in coordinate discipline of Architectural, Structural or M&E.

•Have good knowledge for Architectural, Structural or M&E and proficiency of multiple software platforms (Revit, Navisworks)

Job Description

• Support and carry out the Accounts payable function
• Data entry for all the accounts payable invoices and payment voucher, journal entries into accounting system
• Matching of DO, PO with supplier invoices for payment
• AP reconciliation reports to suppliers' statement
• Prepare AP ageing reports
• Close month end accounts
• ISO compliance documentation
• Other duties as assigned by the departmental manager

Job Requirements

• Minimum Diploma in Accounting or equivalent
• At least one year of relevant working experience

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Job Description

- Understand and comply to company’s policies and procedures

- Work closely with the managers to lead staff

- Ensure smooth operation of outlet

- Confident in interacting with customers

- Provide recommendations and upsell to maximize profitability

- Able to handle POS and staff roster
- Maintain good hygiene and housekeeping
- Statutory Benefits (Annual Leave, Sick Leave, Medical Claim)
- Uniform will be provided

Requirements

- Start work at midnight 12am

- F&B experience

- Able to work in a fast-paced environment

- Strong focus on operations, customer service and food quality

restaurant Service or equivalent.

Job Purpose

The Associate Medical Laboratory Technologist is responsible for performing laboratory diagnostic procedures and related activities so as to provide a quality laboratory service to our customers, both internal and external.

Duties and Responsibilities

Primary Responsibilities and Duties (80%)

• Receive laboratory specimens and reject those that are unsuitable for analysis.
• Operate the Laboratory Information System to perform functions such as result query, order entry and result entry.
• Perform all procedures in accordance with laboratory protocols.
• Alert appropriate laboratory personnel of critical values.
• Receive and resolve queries from customers.
• Notify appropriate laboratory personnel when laboratory instruments malfunction.
• Undertake preventative maintenance on laboratory instrumentation.
• Notify appropriate laboratory personnel when test kits, reagents or other supplies should be re-ordered.
• Comply with good laboratory practice as set out by the Laboratory Accreditation Programme of the College of American Pathologists and Singapore regulatory agencies such as the Medical Audit & Accreditation Unit.
• Comply with all requirements of the Laboratory Safety Manual.
• Report any adverse incidents to senior member of staff.
• Perform shift duties as required.
• Keep current with new instrumentation, techniques and procedures by attending/participating in appropriate workshops, seminars and in-service education classes.
• Promptly carry out the instruction(s) of senior staff with regard to work procedures and duties.

Secondary Duties and Responsibilities (20%)

• Evaluate new laboratory test methodologies.
• Demonstrate laboratory procedures to trainees and new staff.
• Guide Laboratory Technicians, Clerical Staff and Health Attendants in their work when required.
• Participate in routine laboratory administrative work such as filing, processing of delivery orders and invoices.
• Any other duties as assigned by supervisor

Job Specification / Requirements

• Diploma in Medical laboratory Science or related subject and good laboratory skills.
• Above average dexterity with good general health and no colour blindness
• Basic computer literacy
• Good communication skills.
• Service orientated and customer focused

If the role sounds interesting to you, please contact ‘[email protected]’ to understand more on the role. Please indicate the position that you are interested in the subject heading.

*Only Singapore Citizens and Singapore Permanent Residents may apply.

Roles & Responsibilities

• Responsible for production scheduling, working orders and recordings.
• Ensure production activities are carried out properly and efficient utilization of manpower.
• Train new production staff on proper working methods and production recording.
• Work closely with Quality Controller to ensure high Quality products are achieved.
• Ensure the production operation is in the context of ISO & HACCP programs e.g. hygiene standard, work instruction, production records are properly followed and recorded.
• To ensure that all operational duties by the team are completed on a daily schedule, ahead of time, efficiently and effectively
• To provide excellent customer service and management and to ensure that all your staff understands the importance of such standards
• Ensure smooth day-to-day operation of the team
• Obtain sales target and KPIs given by the management
• Assist in planning schedule
• Promote positive work environment
• Ensuring compliance with licensing, hygiene and health and safety legislation/guideline
• Develop strategic and operational plans for managing execution and measuring results
• Any other duties as may be assigned by management
• Must Able to work night shift and split shift
• Must Able to work OT on weekends and public holiday

Roles & Responsibilities:

• Assist Site Manager to supervise constructions work to ensure that quality works are produced & all operations are carried out safely.
• Carry out day-to-day site operations and supervise a team of workers.
• Ensure company’s safety rules are observed and obeyed.
• Ensure safety measures are met on site.
• Daily fetching of foreign workers to and fro dormitories and sites.
• Fetching of foreign workers for all sorts of essential errands.
• To maintain the vehicle in clean and road worthy condition.
• Willing to perform ad-hoc tasks assigned if required.

Requirements:

• Class 3 Driving licence.
• Must be physically fit and healthy.
• Familiar with Singapore route.
• Ability to work across a wide range of tasks, individually and in a team environment.
• Must be willing to work long hours and weekends, if required.

JOB DESCRIPTION :

•Assist in BIM coordination offsite and onsite implementation.

•To produce effective model to meet site needs

•Produce the details shop drawing through the BIM model for site implementation.

Requirements:

•Diploma

•At least 2 years working experience in coordinate discipline of Architectural, Structural or M&E.

•Have good knowledge for Architectural, Structural or M&E and proficiency of multiple software platforms (Revit, Navisworks)

The Qualifications:

• A diploma in Mechanical & Electrical or equivalent qualification.
• Mechanical & Electrical Coordination certificate from BCA
• A relevant Advanced Certificate / Higher NITEC / Advanced NBQ with 2 to 3 years of relevant work experience.
• A relevant certificate with 4 to 5 years of relevant work experience.
• NITEC / Higher NBQ with at least 5 years of relevant work experience12.

Duties and Responsibilities:

1. Assist the Project Manager to plan, monitor and control daily works at the project sites, able to read and drawing M&E drawing by using AutoCAD.

2. Implement all policies, activities, procedures, instructions as relevant and required by the QESH management system.

3. Comply with client and applicable legal and other requirements.

4. Implement plan actions from risks and opportunities assessment.

5. Take responsibility for prevention of work-related injury and ill health.

6. Ensure that project operations and document control procedures are adhered to.

7. Plan, coordinate and monitor M&E subcontractor’s activities at project sites.

8. Maintain good house-keeping and implement safety practices.

9. Ensure that all M&E works carried out are in accordance to the drawings, specifications, construction plan, procedures, work instructions, etc.

10. Ensure that inspection and tests are carried out as per Inspection and Test Plans, quality control mechanisms are being used and results are conformed to specifications.

11. Submit sample materials and calibration certificates to consultants for approval.

12. Undertake any and all other duties and responsibilities as so instructed by the superior.

13. Accountable for the quality, safety, health and environmental management and performance at the project site.

The skills required for an M&E Coordinator position:

• Analytical skills: The ability to analyze data and information to identify patterns, trends, and insights.
• Communication skills: The ability to communicate effectively with stakeholders, including project staff, partners, and donors.
• Project management skills: The ability to manage projects, including planning, implementation, monitoring, and evaluation.
• Research skills: The ability to conduct research, including designing research studies, collecting and analyzing data, and presenting findings.
• Technical skills: The ability to use software and tools for data collection, analysis, and reporting.

-Must be able to work night shift and split shift

-Must be able to work extra hours if needed

-Serves as the link between direct reports and middle / upper management.

-Plans production operations, establishing priorities and sequences for manufacturing products, utilizing knowledge of production processes and methods, machine and equipment capabilities, and human resource requirements and capabilities.

-Makes decisions on job assignments and work priorities

-Reviews production and operating reports and resolves operational, manufacturing, and maintenance problems to ensure minimum costs and prevent operational delays and downtime.

-Responsible for equipment condition and department housekeeping

-Researches, complies and prepares reports, correspondence, and other information required by management, as well as, identifies and resolves report discrepancies or errors.

-Works with employees to maintain a safe work environment. Leads and supports direct reports to work in a safe manner and to seek improvements in work practices.

-Ensures that product quality and production efficiencies meet or exceed established standards.

-Examines procedures and recommends changes to save time, labor, and other costs and to improve quality control and operating efficiency.

-Observes direct reports to ensure compliance with safety, quality, and productivity standards.

-Verifies completeness and accuracy of direct reports’ work, computations, and records.

-Participates in work of direct reports to facilitate productivity or overcome difficult aspects of work.

· Must be able to work night shift and split shift

· Must be able to work extra hours or weekend if needed

• Remuneration package: Up to SGD$2,800 Basic + Variable Bonus
• Singapore Construction project
• Location: Ubi
• 5.5 Days office hour, Alternate Saturday

Responsibilities

• Planning and coordinating Public Relation programme for the project
• Handle enquiries and feedback pertaining to the project and work closely with the relevant parties, such as residents, consultants, authorities, etc.
• Take proactive measures to mitigate complaints arising from the construction activities
• Ensure site employment complies with statutory regulations and company policies
• Dealing with requests and complaints from the public
• Overall in-charge and responsible for the internal and external publication and communication issue
• Working closely with all contractors and taking proactive measures to mitigate all complaints arising from the construction activities
• Filing and maintaining up-to-date file records to enable quick retrieval
• Provide administrative support assistance and other ad-hoc jobs if required

Job Requirements

• GCE 'O'/'A' Level with 1 to 2 years of public relations experience, preferably in building trade as BSC supervisor
• Proficient with MS Office and MS Excel
• Good communication and interpersonal skills

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits

We regret that only shortlisted candidates will be notified

People Profilers Pte Ltd

20 Cecil Street, #08-09 PLUS Building Singapore 049705

EA License Number: 02C4944

Registration Number: R23114519

Posting Personnel: Lin Pei Yu

REF: L47RY767

Job Description & Requirements

The Deputy Manager shall support to the Corporate Safety Department in developing, implementing, and overseeing the Safety, Health, and Environment Management System (SHEMS) across project sites. This role involves ensuring compliance with safety, health, and environmental regulations, codes, and standards, as well as promoting a culture of safety excellence across all projects. The Deputy Manager will oversee and provide guidance to Project WSHE officers.

Key Responsibilities:

SHEMS GOVERNANCE AND OVERSIGHT

• Conduct regular site inspections to ensure compliance with relevant legislations, codes, and regulations.
• Monitor and evaluate the effectiveness of SHEMS implementation and implement improvements as needed.
• Work closely with the Corporate Safety Manager to assist in implementing Management HSE strategies and Directives across project sites.

COMPLIANCE AND ASSURANCE

• Provide guidance and oversee site operations to ensure that all projects, activities, and operations are aligned with health, safety, and environmental laws and regulations.
• Ensure adherence to corporate policies and procedures related to safety, health, and the environment.
• Drive the adoption of best practices to maintain compliance and foster a culture of safety excellence.

Job Requirements:

• Degree in Workplace Safety & Health or its equivalent from a recognized institution
• Registered Workplace Safety & Health Officer (WSHO)
• Registered Environment Control Officer (ECO)
• Minimum 3 years of relevant workplace safety and health practicing experiences (Preferably in Statutory Boards projects)
• Self-starter, driven, ethical

Our client is a Manufacturing company in the Biomedical industry. Due to their current expansion plan, they are looking for a Production Supervisor to join their Production team, in hopes of developing the current high performing production team. They are located in the North – easily accessible.

Duties

• Assist in overseeing daily production operation to ensure day-to-day operation runs smoothly
• Supervise the production team and responsible for manpower and machines allocation
• Execute and train staffs in production team to ensure they can perform their jobs accordingly
• Maintain and improve molding processes to reduce discrepancies
• Ad hoc duties assigned by superior

Requirement

• At least 2 years of experience in Manufacturing industry
• Diploma in any discipline

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

EA License No: 19C9682
EA Personnel No: R2198636
EA Personnel Name: Oh Puey Xin

Job duties:

• Assist to oversee the daily operations of the student care centre.
• Handle administrative duties related to the Centre (e.g. fees collection, registration and withdrawals, administering of subsidy applications)
• Establish and maintain good relations with relevant stakeholders (School management, Parents, External parties) with regards to students and Centre matters
• Able to take 1 class and handle administrative duties
• Other related duties as assigned

Requirements:

• At least 1 year of working experience in the student care/ education industry
• Working location at Jurong West Ave 5

Working Timing:

• Monday to Friday (1pm to 7pm)

Job Description:

• Request quotation and price negotiation with suppliers.
• Prepare purchase order, ensure timely delivery and follow through the complete procurement cycle.
• Responsible for construction material / machinery purchase and to maintain with proper record for receipts and issuance.
• Matching of supplier’s invoices with supporting documents such as PR, PO & DO.
• Maintain up to date prices from suppliers.

Job Requirement:

• Minimum GCE 'O' Level.
• At least 2 years of relevant working experience
• Preferably experience in Construction Industry

With over 1,200 restaurants worldwide, Gyu-Kaku, a new style of Yakiniku restaurant provides high-quality services and low-price Yakiniku to a wide range of customers. Our philosophy “Kando Sozo” ensures and expose you to our customers’ happy faces, thus we are looking for Supervisors to join in our family today.

Job Description & Requirements

1. Full-time position.

2. Team player and willingness to learn.

3. Good soft skills and management skills.

4. Preferable with 2-3 years of experience in F&B industry, experience in Japanese restaurants is a bonus.

5. Mature and positive attitude.

6. Able to commit on weekends and public holiday.

7. Able to accept split shift.

Job Title: Restaurant Supervisor (ID8039)
Location: Changi
Working Hours: 5 days work week, 44 working hours per week
Salary: $2500 - $3000

Job Description:
• Assist the manager/assistant manager in the daily operations of the outlet.
• Ensure guest needs are taken care of and recommend them the promotional items.
• Responsible and accountable for all cash amounts within outlet, in the absence of manager.
• Coach and train existing and new staff to follow Harry’s standards.
• Responsible for proper opening and closing of the outlet.
• Feedback to the manager on any operational issues.
• Responsible for the outlet upkeep and cleanliness
• Responsible for Inventory.
• Recruitment and training of staff.
• Managing staff and providing feedback.

Requirement:
• 2-3 years of experience in F&B.
• Minimum GCE ‘N’ or ‘O’ level.
• Professional communication skills are required.
• Commitment to quality service, and food and beverage knowledge.

Benefits:
• Staff meal will be provided
• AWS
• Flexi-benefits of $500 per calender year

1.Clinical Competencies and Duties

In Speech Therapy services, the Speech Therapist must have the general clinical competences below (though not
exclusive to this list) and had attained the specific area of competency for their specialty area. Depending on current
rotation, the Speech Therapist must also develop specific competencies in the management of patients in one of
these disciplines:

• Neurology/ Neurosurgery
• Geriatrics
• Intensive Care Units
• Ear, Nose, and Throat
• Paediatrics
• Others

2.Supervisory Role

• Assist with supervision of TA
• Assist with appraisal of TA
• Assist to supervise personnel, other than NYP students, attached to the department as and when required

3.Quality Improvement

• Adhere to patient quality service
• Contribute actively to department’s WOW, Kaizen or other service quality improvements projects and initiatives
• Report to Senior Physiotherapist/ Manager, seeking advice and providing feedback on service delivery and improvement

4. Research Contribution

• Collect research data as required and assigned by supervisor/ manager

5. Others

• Perform other duties assigned by Supervisor/ Manager
• Occasional contribution to team/ departmental projects outside of office hours as determined by reporting officer
• Adhere to the policies and procedures of the Hospital and Department

REQUIREMENTS:

• Recognized Degree in Speech Therapy
• Graduate with 1-3 years of experience with competencies in the relevant clinical disciplines, required by AHPL
• Registered with Allied Health Professional Council (AHPC)
• Member of the Speech-Language & Hearing Association of Singapore (SHAS) or equivalent (highly recommended)

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

JOB DESCRIPTION

Report to Project Manager / Site Manager for the Arrangement of work

Liaise with consultants for the submission and approval of materials and shop drawings

Responsible for planning, programming and monitoring of work progress on site Co-ordinate the inspection work by Resident Engineer and clerk of works

Handling technical and engineering problems on site

Ensure site safety and proper execution of site work procedure on site

Monitor and co-ordinate the works of subcontractors Structure and Architectural work

Requirements:

Civil Engineer preferably registered with PE Board

Min 3-4 years’ experience