Job Responsibilities :

• Liaise with client and develop design concepts and basis of design to set direction of design.
• Check engineering deliverables and assure technical integrity of design.
• Ensure all engineering works comply with all relevant Statutory standards, Regulations and Codes of Practices.
• Carry out various types of geotechnical design and analysis – deep excavations, shafts, tunnels, slopes, foundations, etc.
• Carry out appropriate design of structural nature where required.
• Highlight technical issues and update Construction Department on changes and distribute to vendors, engineers and supervisors.
• Plan and execute geotechnical and instrumentation installation and monitoring works.
• Site evalution of soil, rock, fault distribution and geological studies on site to determine their engineering properties.
• Performs other duties or projects as assigned.

Job Requirements:

• Minimum a Diploma, Degree in Civil Engineering, Geology or its equivalent.
• Preferably with a minimum of 2 years of relevant working experiences in construction industry.
• Proficient in Microsoft Office, AutoCAD and Geotechnical analysis software.
• Able to communicate effectively with Client, Consultants, Management and Subcontractors.
• Location: East

We are looking for Structural Fitters to build and maintain Pipe and Structural Systems.

The selected candidate will get to read blueprints, set specifications, lay out plans for fabrication and installation.

Candidate should be able to use mechanical tools following safety guidelines. Ideally with experience in construction sector and installation of structures with different materials (steel etc.)

Preferably have strong numerical and communication skills and one will find great excitement in seeing the systems built and commissioned.

Responsibilities

• Review blueprints to understand requirements
• Set and modify specifications
• Inspect and prepare sites for construction operations
• Must know gas cutting and welding (Basic welding)
• Must have basic knowledge fit-up inspection
• Must have on-site work experience
• Use and maintain tools
• Collaborate with other workers (e.g. welder, painters) to produce finished constructions
• Follow safety guidelines and use protective equipment (e.g. goggles)

Requirements

• Proven experience as Structural fitter
• Knowledge of health and safety guidelines when dealing with dangerous equipment or chemicals
• Good numerical and problem-solving skills
• Strong communication skills

Ability to carry loads

Civil Engineer (Project & Site coordination)

Civil constriction projects

Primary Role

Responsible for advanced Planning, designing, integrating, installation, rigging and lifting equipment, including management of contractors and vendors

Responsible for supervising and assessing the set-up of all project components, manage all aspects of an engineering project, prepare schedules, communicate with clients, project progress.

Key Activities

1. Oversee and regularly review engineering processes and resources to maximize efficiency and productivity
2. Develop plans for new engineering initiatives, including investigating new technologies and developing plans for new project implementations
3. Required to be analytical and precise, to explore alternative solutions and analyze feasibility of plans
4. Work independently and to coordinate closely with internal and external stakeholders to implement new processes and technology, to offer innovative solutions to customers
5. Design, communicate and implement an operational plan, create and maintain cost estimates for projects and programs
6. Identify, develop, and gather the resources necessary to complete the project. This may include preparing engineering standards, designs, and work specifications
7. Developing project schedules, budgets, and forecasts; and selecting materials, equipment, and external contractors
8. Liaise with other operational areas in the organization (engineering, design, drafting, technical) to secure specialize resources and contributions for the project
9. Conduct project meetings and prepare regular reports to communicate the status of the project within and beyond the project team
10. Set priorities, allocate tasks, and to meet project targets and milestones, ensure smooth authority submission
11. Solve technical issues such as drawing discrepancies, site condition changes, verify plans, drawings and quantities for accuracy, raise RFI when necessary
12. Ensure accuracy of setting out, levelling and site surveying and all materials used and work performed are as per specifications
13. Liaising with project consultants, architect, subcontractors, supervisors, planners, quantity surveyors and the general workforce involved in the project
14. Support Project manager to liaise with the local authority (where appropriate to the project) to ensure compliance with local construction regulations and by-laws
15. Liaising with clients and their representatives (architects, engineers, and surveyors), including attending regular meetings to keep them informed of progress
16. Overseeing quality control and assist safety department to achieve health and safety target on site
17. Preparing method statement, daily weekly and monthly report
18. Ensuring all site inspection and record as per client/developer requirement
19. Ensuring all testing and quantity inspection are carried out as per contract requirement
20. Analyze and resolve engineering problems and demonstrate effective skills in oral and written communication

Requirements

Min 3 years experiences in civil, infrastructure projects

Bachelor degree in Civil Engineering, PE board recognized

The MEP (Mechanical, Electrical and Plumbing) Engineer assists the MEP Manager and Project Manager in supervision of all MEP works at Project Site. Ensuring that works carried out by construction coordinators and subcontractors are in accordance with specifications, drawings and stipulated work programme. At the same time making sure that quality requirement, standards and MEP construction materials are efficiently utilized. The MEP Engineer plays a key role in coordinating with client’s representative, consultants, subcontractor, other trade coordinators, and BIM (Building Information Modelling) team, and managing a team of construction coordinators to ensure project is completed profitably.

Job Description

• Reports Construction Manager
• To assist in site supervision works
• Coordinate internally with inter-department and externally with clients & consultants
• Coordinating for the project planning, documentation and execution of works on site
• Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required
• Coordinate for all submission
• Produce weekly site progress report and necessary submission
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.
• To take on PE Assignee Supervision Role

Job Requirement

• Degree in Civil Engineering or equivalent
• Independent with good communication skill
• Good organizational and planning skills
• Effective communication and coordination skills and team work
• Able to work independently and in a team
• Able to start immediately or within a short notice period will have added advantage
• RE Registration with IES of Singapore

Responsibilities:

• Identify any unsafe condition or unsafe act which is carried out in the worksite.
• Recommend and assist the Occupier of the worksite to implement reasonable and practicable measures.
• Liaise with different departments on all safety and health matters.
• Conduct regular site inspections and takes appropriate corrective actions.
• Ensure compliance with Workplace Safety and Health Regulations and other legislative requirements.
• Enforce all WSH requirements and in-house rules and regulations.
• Assist in the investigations and reporting of accidents/ incidents and recommend corrective and prevetive actions.
• Conduct training/ meeting/ briefing/ time-out to the workforce.
• Follow up on submission of SHE documents.
• Monitor the SHE performance in the worksite.
• Performs other duties as assigned.

Requirements:

• Certificate in Advanced Certificate in WSH Level B and/or any relevant Safety Certificates.
• With at least 2 years of working experience in Tunnel construction projects.
• Experience in SMRT and LTA will be advantage.
• Good interpersonal skills.
• This role may require rotating shift.
• Ability to work under pressure in a fast pace environment.

Job Description & Requirements

Responsibilities:

• Assist to Plan and schedule work sequences for construction operation
• Liaise with emmployees / sub-contractors and coordinate for site activities arrangement
• Perform site inspection and ensure that the work are carried out based on the project specification and construction drawing / final approved drawing from authorities
• Lead a team of supervisors for works coordination with main/sub-contractors and/or authorities and/or consultant on project progress and technical issues
• Preparation of progress report, and site expenses details.
• Adhere to safety and health regulations and aim for zero accident in the workplace
• Ensure safety and housekeeping is to maintained to the highest standard
• To perform Ad-Hoc duties as per assigned

Qualifications:

• Any diploma or degree related to construction.
• Strong problem-solving skills with the ability to analyse complex issues and propose effective solutions.
• Excellent attention to detail and the ability to prioritize and manage multiple tasks.
• Good interpersonal skills and the ability to work effectively in a team environment.
• Proficient in using microsoft word and excell documentation, and project management.
• Good attitude with willingness to learn and take on new challenges in a fast-paced environment.

As part of a finance team who contributes to the ongoing effectiveness and efficiency of the new Private Residential development project, you will conduct the financial management, budget and cost control and forcasting of project development sector within the Group.

Responsibilities:

1.Establish project company’s financial management regulation, develop job responsibilities/scopes and related SOP

2. Daily bookkeeping and ensure accuracy and filing of files in a timely manner

3. Complete the financial statement and annual audit work

4. Manage consolidation and preparation of monthly and quarterly management reports, budgets and forecasts, cost control

5. Establish a financial analysis procedure and model, and report financial status to management regularly

6. Manage statutory filings including financial statements and tax

7. Prepare project capital plan and ensure proper cash flow and allocation of funds, as well as managing capital risks

8. Assist in cost analysis of investment and financing projects, and cooperate with the formulation of investment and financing plans

9. Other adhoc tasks assigned

Requirements:

1. Degree or professional qualification in Accountancy; CFA, ACCA, CPA and other qualifications are preferred

2. At least 3 years working experience in financial management of Real Estate development projects in Singapore, familiar with financing, taxation, cost control and other related to Real Estate development business

3. Familiar with Singapore's financial policies, corporate financial regulations, and procedures, and proficient in relevant financial and tax laws and regulations

4. Strong capabilities in capital management, cost control, risk control and financial analysis

5. Good organization, coordination, communication skills and teamwork spirit, have a strong sense of responsibility

Monday to Friday; Based in HQ (near Changi Business Park)

Roles & Responsibilities

Job Descriptions:

• Overseeing the construction activities and progress, planning, implementation and monitoring work schedules in accordance to the master and detailed work programme.
• Liaise with Professional Engineer on the Temporary works.
• Liaise with consultants for technical issues and coordinate the site activities with subcontractors.
• Handing of technical and engineering problems.
• Provide guidance to supervisors in relation to construction works, ensure progress according to schedule, quality standards are maintained site inspections are carried out and technical issues are resolved on time.
• Prepare report and method statement whenever necessary.
• Manage and control workers and monitor their work closely to keep site safer and neat.
• Supervise ongoing site activities closely.
• Other ad-hoc assigned by the Company.

General Requirements:

• Diploma/Degree in Civil Engineering or Recognised Certificate in the relevant field subject.
• Min. 3-5yrs experience in the construction site.
• Good communication and analytical skills, able to interact with people of all levels.

Job Description:

• Report to the Senior Project Manager/Project Director
• To assist in site supervision works
• Coordinate internally with inter-department and externally with clients & consultants
• Coordinating for the project planning, documentation, and execution of works on-site
• Coordination, supervision & monitoring of the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor and suppliers on all project implementation issues and attend site meetings when required
• Coordinate all submissions
• Produce weekly site progress reports and necessary submissions
• Attend meetings, and conduct site inspections on work progress to ensure quality control by authority requirements.

Job Requirement：

• Degree in Engineering or equivalent
• At least 3 Years of working experience in the related field is required for this position
• Experience in reinforced concrete building and architectural design is an advantage
• Able to work well under pressure
• Independent with good communication skills
• Good organizational and planning skills
• Effective communication, coordination skills, and teamwork
• Able to work 6 working days
• Able to work overtime/shift rotation

JOB SUMMARY:

• Ensures delivery of pre-cast products or materials to site.

DUTIES AND RESPONSIBILITIES:

The Tower Crane Operator duties and responsibilities are as follows.

• Lifting of precast products or materials on sites.
• monitoring the load weights and stability of the crane.
• Responsible for basic housekeeping and maintenance of tower crane.
• Complies with all and ensures compliance of all safety, health, environmental and other company policies, procedures and requirements.
• inspecting the machinery before and after use.
• Any other duties as assigned by the Supervisor/Project Manager as and when needed.

REQUIREMENTS:

• Complete secondary school or higher education level.
• Obtain a Class 5 driving licence.
• Complete a relevant crane operator course.
• Be able to communicate with your team.

• Reports to APM
• To assist in site supervision structural and architectural works
• Coordinate with consultant RTO / RE.
• Coordinating for the project planning, documentation and execution of works on site
• Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required
• Coordinate for all submissions
• Produce weekly site progress reports
• Attend subcon meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements
• At least 5 years of working experience in Building & Construction in HDB (BTO) project
• Building and Architectural experiences
• Conquas Knowledge
• Good organizational and planning skills
• Effective communication and coordination skills and team work
• Able to work independently and in a team
• Independent with good communication skill

Handle and determine the quantities, shapes and sizes and location of the rods from the drawings and sketches
Prepare the cutting list schedule depending on the design specs
Perform advance planning in rebar schedule per area
Perform quantity of steel material needed for the design execution
Can read structural drawing in preparing rebar's quantity
Compile and prepare material wastage summary
Control and minimize material wastages
Generation of monthly report
Other adhoc duties as assigned by the immediate supervisor/management

Must have knowledge in AutoCAD, MS Ofiice
Candidate must complete at least Higher secondary/Pr-U/A level/College
At least 1-2 years’ bar bend scheduler experience
Willing to travel aroung project sites offices within Singapore
Able to work independently and cope in a fast-paced environment

1) Plan, manage, inspect, compile service reports for Routine Maintenance for M&E Systems

2) Prepare quotation via Schedule of Rates for any repairs or new works

3) Attend to Fault calls for emergency/critical M&E systems

4) Attend to any meetings as arranged by superior

5) Any other works assigned by superior

6) Provide Support in project works

Requirement

1) Nitec / Diploma in Mechanical

2) Candidate with no Qualification but with relevant experience may be considered

3) Fresh graduates are welcome to apply

Responsibilities:

• Responsible for ferrying of staff and dispatch works as assigned
• Ensure timely collections and deliveries of goods / items
• Ensure cleanliness and general upkeep of vehicles at all times
• Perform routine inspection of vehicle and notify of occurring deficiencies or needs for repairs
• To perform work according to health and safety regulations
• Ensure safety practices and housekeeping is to maintained to the highest standard
• To perform Ad-Hoc duties as per assigned

Requirement:

• Class 3 / 4 Driving License
• Min 1 year of experience
• Familiar with Singapore roads

Responsibilities:-

1. Operate prime mover/trailer, transport loads from point to point
2. Daily checks on vehicle and plan routes
3. Comply to safety regulations
4. Any other ad-hoc duties assigned
5. Loading and unloading of goods

Requirements:-

1. Class 4 / 5 Driving Licence
2. familiar with construction sites
3. Good interpersonal skills

Job Description & Requirements

· Responsible for planning and monitoring schedule for all projects

· Work closely with drafters and perform quality check of all drawings before production on site.

· Ensure the execution of works, products and services are in accordance with the customers’ requirements, drawings and specifications, etc and direct the carrying out of remedial measures to any non-conformances immediately upon discovery.

· Liaise with Project teams, authorities, client, architects and various contractors to ensure project work is carried out smoothly.

· Conduct periodic inspection of structural works.

Requirements:

· Degree in Civil/Structural Engineering recognized by P.E. Board

· Min. 3 years relevant experience in building and construction related field

· Able to work independently and in a team

Job Description

- Managing a part of the construction

project

- Assist in technical advice and supervision

for other members of the staff

- Planning day to day work program of the

project progress

- Ensure projects meets agreed

specifications, budgets as well as

timescales

- Authorizing technical drawings and

engineering plans

- Ad-hoc assignments

Job Requirements

- Diploma in civil engineering or equivalent

- Minimum 1 year experience in landed

property from start to finish

- Good communications skills

· Prepare contracts and documents

· Set budgets for payments, inventory needs, and materials

· Negotiate with contractors and subcontractors

· Hire and document contractors and subcontractors

· Act as a liaison between clients and site managers/engineers

· Keep track of construction materials and inventory

· Advise clients on improvements, strategies, and/or estimated costs

· Prepare payments for contractors and subcontractors

· Document progress, materials, and reports on project

· Source maintenance costs and facilities management for clients

· Develop and maintain working relationships with contractors and subcontractors

· Utilize software to calculate, record, and track inventory and estimates

Job Responsibilities:

• Prepare and establish a BIM Execution Plan that outlines the plan and processes in which BIM will be implemented throughout the project lifecycle to meet the BIM requirements of the Contract.
• Develop, update and implement the BIM Execution Plan in accordance with the latest Singapore BIM Guide and the requirements detailed in this BIM Requirements (Design and Construction);
• Oversee, coordinate and manage all BIM related aspects of projects, from tender to construction stage.
• Ensure the appropriate implementation of the BIM Execution Plan and deliverables as well as the effective and efficient collaboration and coordination of design.
• Responsible for the management of BIM Execution Plan, BIM strategies, processes and standards for the discipline/area of design works.
• Oversee appropriate data flow internally and externally. Validate level of detail, modelling content and quality control;
• Participate in design and model coordination meetings and reviews sessions.
• Be responsible for any other duties that may be assigned from time to time as your superior/management deem fit.

Job Requirements:

• Diploma or Degree in Architecture/ M&E Certificate from BCA BIM modelling course or equivalent.
• Certificate in BIM Revit for Architecture.
• Proficient in BIM modelling on operational level.
• Able to work independently as well as a good team player.
• Able to work in a fast pace and dynamic environment.
• Ability to multi-task, communicate effectively, and maintain strict confidentiality of information.
• Preferably experiences specializing in Engineering-Civil/Construction/Structural or equivalent.
• Proven experience or records for project involved for the relevant works.
• Working Location: Pasir Ris
• 5.5 working days

Senior Civil Engineer

Primary Role

Responsible for advanced Planning, designing, integrating, installation, rigging and lifting equipment, including management of contractors and vendors.

Responsible for supervising and assessing the set-up of all project components, managing all aspects of an engineering project, prepare schedules, communicate with clients and project progress.

Key Activities

1. Provide guidance and direction to civil engineering staff, ensuring their compliance with applicable regulations, standards, and codes
2. Oversee and regularly review engineering processes and resources to maximize efficiency and productivity
3. Develop plans for new engineering initiatives, including investigating new technologies and developing plans for new project implementations
4. Required to be analytical and precise, in order to explore alternative solutions and analyze feasibility of plans
5. Work independently and coordinate closely with internal and external stakeholders to implement new processes and technology, to offer innovative solutions to customers
6. Design, communicate and implement an operational plan, create and maintain cost estimates for projects and programs
7. Identify, develop, and gather the resources necessary to complete the project. This may include preparing engineering standards, designs, and work specifications
8. Developing project schedules, budget, and forecasts; and selecting materials, equipment, and external contractors
9. Liaise with other operational areas in the organization (engineering, design, drafting, technical) to secure specialize resources and contributions for the project
10. Conduct project meetings and prepare regular reports to communicate the status of the project within and beyond the project team
11. Set priorities, allocate tasks, and to meet project targets and milestones, ensure smooth authority submission
12. Solve technical issues such as drawing discrepancies, site condition changes, verify plans, drawings and quantities for accuracy, raise RFI when necessary
13. Ensure accuracy of setting out, levelling and site surveying and all materials used and work performed are as per specifications
14. Liaising with project consultants, architect, subcontractors, supervisors, planners, quantity surveyors and the general workforce involved in the project
15. Support Project manager to liaise with the local authority (where appropriate to the project) to ensure compliance with local construction regulations and by-laws
16. Liaising with clients and their representatives (architects, engineers, and surveyors), including attending regular meetings to keep them informed of progress
17. Overseeing quality control and assist safety department to achieve health and safety target on site
18. Preparing method statement, daily weekly and monthly report
19. Ensuring all site inspection and record as per client/developer requirement
20. Ensuring all testing and quantity inspection are carried out as per contract requirement
21. Analyze and resolve engineering problems and demonstrate effective skills in oral and written communication

Requirements

Min 5 years experiences in civil, infrastructure projects

Bachelor degree in Civil Engineering, PE board recognized

Job Responsibilites

• Manage the overall delivery of the infrastructure project on or ahead of time with all client expectations met.
• Assign resources to deliver the works within budget, time, quality and regulatory standards, monitor and guide workflow, setting daily, weekly and long-term project goals.
• Manage the specialist functions of design, engineering, procurement and construction, manage the interaction of various disciplines and multiple work streams.
• Production planning, review progress against plans, contractual arrangements and delivery milestones to ensure they are on schedule and within quality and cost estimates and take effective remedial action as required.
• Financial Management: Ensure strong contract, commercial and financial risk management, accurate forecasting of both costs and revenue, take corrective action in line with CCCC authority and reporting frameworks and maximise the profit margin for the project.
• Demonstrate leadership in risk management, compliance and auditing and ensure legislative, pre-contract and commercial obligations are met, including compliance with the relevant Building Code.
• Stakeholder management: Ensure that stakeholders are actively engaged and that beneficial relationships between the project and the client, subcontractors, community and other external parties are developed and maintained.
• People management: Monitor staff and labour resourcing to ensure the project has the capability to achieve targets, supervise workforce, including subcontractors and foster a high performance team with a positive employee relations environment.
• Contribute to new business, continuous improvement and broader business activities
• Arrange coordination with LTA and QPS and meeting with subcontractors.
• Coordinate with headquarter and site team to obtain enough resources for the projects
• Organize a proper project management team & plan to carry out the construction works
• Submission of progress report to project manager, client and relevant personnel.
• Ensure compliance with all authorities' regulations, which include BCA, PG, PUB and NEA etc.
• Perform all duties in accordance with company’s polices, processes, systems, reporting and procedures.

Job Requirement:

• Holds a Recognised Degree in Civil Engineering or transportation engineering degree.
• Minimum ten (10) years of experience in construction industry
• At least seven (7) years of experience with main-contractor.
• Able to to lead work with counterparties overseas.
• Possess effective time-management skills to meet deadlines and planned deliverables.

Senior Project/Site Engineer is responsible for assisting the Project Manager on the progress of the projects/site works and manpower related aspects of the project. They are to oversee drawing management and make sure the updated drawings to the clients and subcontractor are issued.

Job Responsibilities:

• Plan and schedule work sequences for construction operation
• To study tender / construction drawings, specifications and contracts to understand project requirements
• Liaise with consultants, client & main / sub-contractors and coordinate for site activities arrangement
• Perform site inspection and ensure that the work are carried out based on the project specification and construction drawing / final approved drawing from authorities
• Lead a team of supervisors / foreman for works coordination with main/sub-contractors and/or authorities and/or consultant on project progress and technical issues
• Assist in preparation of method statement and construction sequence for project implementation
• Assist project manager in Project Costing, monthly progress claims and monthly progress report
• Support Quantity Surveyor (QS) in verifying progress payments and claims
• Coordinating the handing-over of completed works to the client and completion of the necessary rectification works

Job Requirements:

• Candidate must possesses Bachelor's Degree in Civil Engineering
• Minimum 3-6 years of relevant working experience

Job Description:

• Plan and schedule work sequences for construction operation
• To study tender / construction drawings, specifications and contracts to understand project requirements
• Liaise with consultants, client & main / sub-contractors and coordinate for site activities arrangement
• Perform site inspection and ensure that the work are carried out based on the project specification and construction drawing / final approved drawing from authorities

Job Requirements:

• Candidate must possesses Bachelor's Degree in Civil Engineering

The MEP (Mechanical, Electrical and Plumbing) Engineer assists the MEP Manager and Project Manager in supervision of all MEP works at Project Site. Ensuring that works carried out by construction coordinators and subcontractors are in accordance with specifications, drawings and stipulated work programme. At the same time making sure that quality requirement, standards and MEP construction materials are efficiently utilized. The MEP Engineer plays a key role in coordinating with client’s representative, consultants, subcontractor, other trade coordinators, and BIM (Building Information Modelling) team, and managing a team of construction coordinators to ensure project is completed profitably.