• Reading blueprints or looking at sketches to determine how to install rebar or mesh
• Figuring out the quantity, size, and shapes of reinforcing rods and determining where to place them
• Preparing rebar and mesh for installation using metal shears, hacksaws, and torches
• Bending or welding rebar together
• Installing cables
• Using pliers to tie wire around rods to fasten them together
• Positioning and securing rods, cables, mesh, or rebar in concrete forms

• Reading blueprints and drawings and taking measurements to plan layout and procedures
• Determining the appropriate welding equipment or method based on requirements
• Setting up components for welding according to specifications

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

• Assists Project Manager in the co-ordination of project management activities to ensure that projects are executed in a smooth and effective manner;
• Attends external project kick-off meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting;
• Assists Project Manager in carrying out all shop drawings and submission with Drafting Department;
• Assists Project Manager in carrying out risk assessment and other risk management activities; makes recommendations on risk control measures; communicating risk assessment to all workers;
• Ensures all contractors are safety inducted and issued with Permit before work commencement;
• Ensures the adherence to the safe work procedure (SWP) established; to inform project manager or project director of any shortcoming in the SWP or risk control measures implemented;
• Ensures the familiarization with the scope of works;
• Resolves site problems proactively in a timely manner and seeks advice from Project Manager as appropriate;
• Ensures the timely preparation of project progress and other reports;
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation;
• Co-ordinates daily activities of workers’ duties and to ensure that they are performed in a proper manner;
• Makes daily checks on work progress, housekeeping and safety implementation on site with safety personnel;
• Assists in cost control by cutting materials wastage, reducing labour cost, usage of tools and equipment, etc;
• Assists the Project Manager in conducting Mass Tool Box meeting with safety personnel;
• Ensures proper project documentation including email communication;
• Assists in promoting good team morale and team spirit in the project team;
• Strong in Structural work

JOB ROLES / RESPONSIBILITY:

• To work full-time in to carry out various administration and accounting works of the office.
• To set-up an accounting system in the office and meet/pass Auditor's requirement.
• To carry-out book-keeping, full set of accounts, and preparation of financial statements for various types of business
• Made detailed testing on transactions and balances and vouching, posting and checking trial balance preparation
• Analyze transactions, internal reports and financial information for potential fraud risks
• Perform special assignments: review of accountancy records, valuation, and consultancy works
• All communication with clients is supported by emails, document agreed action steps, responsibilities and deadlines are handled promptly and effectively.
• Preparation of Commercial Tax, Withholding Tax, Corporate Tax, Personal Tax computation and submission of Tax Clearance

JOB RESPONSIBILITIES

• Prepared procurement comparison chart and recommended subcontractors
• Calculated and compared material quantities
• Prepared Letter Of Award to subcontractors
• Prepared subcontractors’ payment certificates
• Prepared Purchase Order
• Prepared Monthly Payment To Subcon List
• Prepared client’s progress claims
• Liaised with Project Manager, Accountant, Engineers and subcontractors
• Typed out correspondences and schedules
• Prepared Variation Orders using SOR
• Clarify contractual terms

Job Scope:

Install, configure, troubleshoot, and support servers running on Windows and Linux operating systems.

Perform routine system maintenance tasks such as patching software, updating firmware, and conducting hardware evaluations/upgrades.

Manage user access control by setting up accounts, permissions, and ensuring adherence to company policies regarding data security.

Oversee the administration of internal resources including Active Directory (for Windows) or LDAP (for Linux), file sharing services, and print servers.

Monitor network traffic/server utilization to identify potential issues before they become critical problems; implement performance tuning strategies when necessary.

Administer SAN/NAS environments including disk provisioning, LUN management, zoning, fiber channel networking etc.; ensure efficient operation with minimal downtime through proactive monitoring/maintenance practices

Develop/implement backup recovery plans for critical data stored across various platforms;

Conduct regular audits/capacity analysis reports in order to plan for future growth needs while optimizing current resource usage.

Job Requirements:

Degree in Computer Science, Information Systems or related field preferred;

Minimum 5 Years work experience will be considered

Proficient in BIM software and AUTOCAD will be an added advantage

Good interpersonal and communication skills

Proven track record managing both Windows/Linux server environments

Experience with virtualization technologies like VMware/Hyper-V is highly desirable

Knowledgeable about configuring/maintaining enterprise-level storage solutions (SAN/NAS)

Strong analytical/troubleshooting skills combined with excellent communication abilities

Ability to document processes/procedures clearly concisely

Able to handle any adhoc jobs based on our Industry

Operate and promote safe working on site, assign dayly work on construction site. Scheduling, co-ordinaating and supervising the work of all site operatives, ensuring that all work is delivered safely on time and within budget along with managing equipment and materials required. Order and manage hired . internal equipment on a dayly basis, co-ordinate delivery / pick up of material as required.

Responsiblities

• To assist the Project Manager in project planning, coordination works of all architectural trades, finishes and interfacing with M&E and Structural detail.
• Ensure all architectural drawing, material sample submission, and method statement are submitted on time as per program.
• To coordinate with other team members and subcontractors to resolve any challenges
• Review project specifications, technical clarifications, review accuracy of construction drawings, charts and forms
• Carry out architectural works scheduling, material requisition, project supervision and documentation
• Ensure quality of works and detailing is achieved, and complied with any safety regulation and maintainability.
• Handle any other ad-hoc duties and tasks assigned.

Requirements:

• Degree / Diploma in Architecture or equivalent.
• Knowledge of BIM / VDC technology will be an added advantage
• Minimum 2 years of working experience in architectural finishing work
• Good interpersonal skill, meticulous, independent and a team player
• Candidates with Architectural CONQUAS experiences, knowledge of Singapore building codes and regulations and familiar with local standard quality implementation will be an added advantage
• Knowledge in green mark documentation will be added advantage
• Experienced in RI and TOP inspection procedure and documentation are added advantage

Element has an opportunity for a Administrator to join our growing team. This is a great opportunity to develop your Administration career within a Global TIC business.

This role is based in Sungei Kadut Loop, Singapore.

Job Duties:

• Assist with the Reception desk as required and other associated tasks, including directing incoming calls and visitor arrival/departure
• Using the in-house database and other systems effectively to ensure maximum efficiency
• Ability to work flexibly in a busy environment with an established team and processes
• Organising couriers
• Maintain filing system
• Prepare mail
• Arrange correspondence for overseas deliveries

Job Requirements:

• Relevant experience within an office environment would be advantageous
• Highly motivated and organized individual with a flexible approach to work
• Detail-oriented and ability to work independently
• Ability to work well under pressure and meet tight deadlines without compromising the quality of work or safety
• Able to work on Saturdays as of when required

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Job Description

• Processing payment and prepare cheque
• Supporting Accountant in data entry and information gather for reports purpose
• Record financial transactions, including accounts payable, accounts receivable, and general ledger entries
• Process and verify invoices, match them with purchase orders and delivery receipts, and ensure timely payment to vendors
• Assist in preparing financial reports, including balance sheets, profit and loss statements, and cash flow statements
• Review and process employee expense reports, ensuring adherence to company policies and verifying supporting documentation
• A/R, A/P transactions
• Any other ad-hoc work instructed by superior for account related matters

Requirements

• Min Diploma in Accountancy
• Accounting knowledge is necessary
• AT least 1-year experience
• Proficiency in using accounting software and Microsoft Office applications
• Strong attention to detail and accuracy in data entry and financial records
• Excellent organizational and time management skills
• Ability to work collaboratively in a team environment
• Basic understanding of financial regulations and compliance

• Develop detailed project plans, including scope, goals, deliverables, resource allocation, timelines, and budgets.
• Work closely with project managers, engineers, and stakeholders to ensure all aspects of the project are aligned and progressing smoothly.
• Provide engineering expertise and technical guidance throughout the project lifecycle.
• Maintain thorough documentation of project activities, including plans, designs, reports, and updates.
• Monitor project costs, manage budgets, and report on financial status.
• Identify potential risks and develop mitigation strategies to ensure project success.
• Ensure all project activities meet or exceed industry standards, regulations, and company quality guidelines.
• Regularly update stakeholders on project progress, challenges, and changes in scope.
• Address technical issues and project challenges, providing solutions to keep the project on track.

Job Description

• Perform process design for chemical plants, storage terminals, industrial waste facilities in basic design, FEED and detailed engineering stage.
• Responsible for developing process engineering deliverables including PFD, P&ID, calculation reports, heat and mass balance, system descriptions, line list, simulation model, utility consumption list, process control philosophy, etc in accordance with project requirement and applicable codes/standard.
• To carry out process calculations such as hydraulic calculation, surge analysis, heat transfer calculation, pressure relief and blowdown analysis, utility consumption calculation, equipment sizing, etc.
• Develop firefighting design philosophy, fire water/foam demand calculation and fire water/foam network hydraulic simulation as per local regulation and international code/standard.
• Develop design basis and UFD for utility supply system and wastewater handling system.
• To participate in design review, Process Hazard Analysis, SIL Studies, 3D Modeling review and prepare close-out reports when required.
• Work closely and co-ordinate with other engineering disciplines for preparation of process deliverables and provide process parameter input as required.
• Provide regular update to Lead Process Engineer, Process Manager and Engineering manager on process related technical and engineering issues.

Requirements:

• Diploma and Bachelor’s Degree in Chemical,Process Engineering or equivalent
• Team player with strong analytical and communication skills
• Minimum 3 years of experience in oil & gas/petrochemical/water treatment /chemical plants
• Fresh Graduates are also welcome to apply

Job Requirement

1. Minimum Bachelor degree with at least Six (6) years’ relevant field safety experience in supervision of installation and maintenance of roadside and Civil and structural coordination with government/utility agencies and other contractors.

2. Experience as a safety auditor/inspector in ensuring Environmental, Safety and Health practices are complied with.

3. Strong analytical and problem-solving skills, resourceful and meticulous.

4. Highly motivated and pro-active with the ability to work both independently as well as in a team.

5. Proficient in Microsoft Office (Outlook, Word, Excel, and PowerPoint for Windows.

6. Good verbal communication and writing skills in English.

7. Be expected to travel regularly between office and sites.

8. Prepared to work on site and perform night work based on project needs.

Job Description

1. Oversee the works on equipment structures, installations, deployments, facilities, and equipment being deployed at sites.

2. Plan and work out the resource provision requirements, work, schedule, and Standard Operating Procedures (SOP) for works at sites.

3. Review planned work schedule and method statements prior to commencement of site work activities.

4. Ensure that works are carried out accordingly to design, meeting the safety, health, environmental and comfort requirement for stakeholders.

5. Identify defects and damages at the site infrastructures, including equipment and facilities, as well as theft, accidents, and incidents.

6. Carry out safety training to instil safety awareness. Ensure safety rules and regulations at sites are adhered to by all site personnel.

7. Be part of Safety Committee and ensure compliance to safety, health and environmental requirements including Authority Code of Practices (COP) and WSH, MOH & MOM Guidelines.

8. Resolve any unexpected problems or difficulties that may arise at sites.

10. Prepare regular reports to update site progress, resource utilisation, requirements, past and on-going activities, etc.

Please email your resume to [email protected]

Location: Jurong West Area

Job Description

• Supervise and lead the construction team to lay down construction milestone.
• Manage construction activities, ensuring timely and smooth progress of the operations.
• Responsible for implementing the work plan and attending project meetings
• Resolve design site problems encountered during the construction period.
• Producing site progress report to management.
• Monitor and ensure subcontractors comply with specified requirements.
• Identify and comply with all applicable statutory/ regulatory requirements related to project.
• Coordination and sequencing of works of different subcontractors.
• Identify possible risks to project and stakeholders as well as create contingency plans to mitigate these risks.
• Respond swiftly to work delays, emergencies and other problems.
• Clear communication to external parties including client, subcontractors, consultant, vendor etc on project needs, requirements and schedule by means of daily construction oversight.

Job Requirements:

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Civil) or equivalent.
• At least 10-15 Year(s) of working experience in the related field is required for this position.

Responsibilities:

• Assist the project manager with on and off site meeting pertaining to the technical issues
• Responsible for submission of Architectural samples, shops drawing and other related documents to the consultants or authorities
• Coordinate and monitor work progress at site including periodical site inspection and attending meetings during course of construction of project
• Proven problem solving and achievements work progress according to the work schedule
• Site supervision and able to coordinate well with sub-contractors, RE and RTO

Requirements:

• Candidate must at least a Diploma in Civil Engineering or equivalent
• Min 5 years relevant experience in the related field for this position
• Be able to work independently with minimum guidance
• Good team player, willing to learn and contribute

Responsibilities:

• Assist the project manager with on and off site meeting pertaining to the technical issues
• Responsible for submission of Architectural samples, shops drawing and other related documents to the consultants or authorities
• Coordinate and monitor work progress at site including periodical site inspection and attending meetings during course of construction of project
• Proven problem solving and achievements work progress according to the work schedule
• Site supervision and able to coordinate well with sub-contractors, RE and RTO

Requirements:

• Candidate must at least a Post Graduate Diploma in Civil Engineering or equivalent
• Min 3 years relevant experience in the related field for this position
• Be able to work independently with minimum guidance
• Good team player, keen desire to learn, contribute, advance and progress with the company

Job Description

• Handing full set of accounts including GST RETURNS, Tax matters and audit matters
• Oversee daily operations
• Preparing monthly financial reports, audit schedules and variance analysis
• Perform Bank Reconciliation
• Monitoring of Cash Flow
• Assisting in annual budget and forecasting process
• Experience in preparing government statistic board surveys
• Credit control and receivables management
• Liaise with external auditor and tax advisors on accounting matters
• Ensuring accounting operations are carried out according to internal SOP (Filing, data entry, etc)

Requirements

• Diploma / Degree in Accountancy / ACCA or equivalent
• Min 3 years of full set of accounts experience
• Preferably with Real Estate Experience
• Proficient in Microsoft Excel
• Team player with initiative, willing to learn, positive working attitude

Responsiblities

• Manage construction activities and progress independently.
• Supervise and lead a team of workers and sub-contractor to perform on site work.
• Resolve design site problems encountered during the construction period.
• Prepare daily progress report,work schedule and worker schedule.
• Able to understand structural drawing, specifications and requirements.
• Monitoring and control of contract works to ensure compliance with technical specifications, code of practice, scope of work and to enforce safety regulations.
• Perform onsite installation, troubleshooting, repair, routine checks and maintenance.
• Responsible for general electrical fitting work.
• Other work-related duties as and when required.

Requirements

• Good knowledge of reading specifications and building drawings.
• At least 5 Year(s) of working experience in the related field is required.
• Experience with track records in A&A projects would be an advantage.
• Good team player, keen desire to learn, contribute, advance and progress with the company
• Able to speak and understand Chinese language to able communicate effectively with the vendors , sub-contractors and workers.
• Singaporean and Permanent Residence preferred to apply.

*We regret that only shortlisted candidate will be notified.

JOB DESCRIPTION:

• Handle general admin tasks (phone calls, office stationery, office maintenance, attendance checking on the time management system)
• Prepare and manage staff and project petty cash claim
• Provide clerical & administration support to project team
• Filing and maintain up-to-date file records to enable quick retrieval
• Other ad-hoc duties assigned by the management

JOB REQUIREMENT:

• GCE 'O' level
• Min 2 years' experience in main contractor compaines,
• Proficient in Microsoft Office
• Excellent interpersonal communication ability
• Possess positive attitude towards work and team oriented
• Able to start work in a short notice period

• Planning and scheduling: Estimating the time and materials needed to complete projects
• Leading and coordinating: Supervising and coordinating the work of electricians and technicians
• Installation and maintenance: Overseeing the installation, testing, and commissioning of electrical systems
• Safety and compliance: Ensuring that all electrical activities comply with safety standards and regulations
• Quality assurance: Inspecting and testing completed electrical work to ensure it meets project specifications
• Troubleshooting and problem-solving: Diagnosing and resolving issues in electrical systems and equipment.

Restaurant Supervisor

- Ushering customers to their tables

- Responsible for presenting menus to customers.

- Makes recommendations and serves food/beverages to customers.

- Ensure the Cleanliness of the outlet.

- Responsible for Front of House operations.

- Full time or Part time (Flexi working hours)

Please Watsapp 8168 4877

Responsibilities:

• Oversee day to day operations of the facility
• Schedule preparation, pre-planning and resource forecasting to all activities
• Monitor and control food management on site as to ensure proper storage and unnecessary wastage
• Foster positive communications and relationships with team members, management, vendors and clients
• Provide for site safety and security, devise and implement site policies and standard operating procedures
• Handle emergencies appropriately according to established procedures, prepare and file accident reports
• Supervise and evaluate staff, complete employee reviews; keep accurate records of employee attendance and timesheets; provide positive direction to motivate quality performance, discipline personnel when necessary and appropriate
• Interview candidates; onboard and help in training new hires
• Set goals and oversee work to completion, schedule and track assignments
• Communicate with customers regarding products and services
• Liase and work closely with customers
• Any other ad-hoc duties as assigned from time to time

Requirements:

• A minimum of 2 years of relevant experience in KTV / Restaurant Service / Retail or equivalent
• At least a Certificate in Food & Beverage service
• Great communication skills
• Able to commit shift work, weekends and public holidays

Duties

• Manage daily productions and ensure efficiency of operations, including capacity planning, loading and optimization
• Monitor and day-to-day operations to ensure productivity by ERP system
• Planning and scheduling work deployments daily
• Communicate and report updates to Technical Director to review and support processes
• Development and oversight of staff appraisal and supervision systems
• Resolving performance issues among staff
• Handle customer concerns and resolving them immediately
• Ensure all machines are well maintained and coordinate servicing & repair with service team
• Develop operations-related plans, manufacturing budgets and policies & procedures to comply with ISO and AS standards.
• Review and propose new strategies to achieve better efficiency in production

Responsibilities

• Lead and direct business operations in alignment with company policies
• Manage plan changes, including internal and external communications, HR and related technical issues
• Oversee and drive the production team to meet company objectives and KPI.
• Reinforce internal policies, business planning, procedures and quality standards on all practices executed by staff
• Improve manufacturing capability, technologies and problem solving in conjunction with quality & engineering requirement
• Development of workforce plans including competency frameworks to meet operational requirements of organization
• Cultivate safeguarding against unexpected operational incidents that affect business continuity
• Undertake other tasks including administrative duties in connection with the post
• Perform ad-hoc duties as and when required
• Minimum 5 years of relevant experience in supervising in engineering production industry
• Experience in managing a workforce of 50 or more people preferred
• Advanced/Higher/Graduate Diploma/Post Graduate Diploma in Mechanical /Manufacturing Engineering field preferred
• Good interpersonal and communication skills in dealing with staff, clients and suppliers
• Efficient project management, problem solving & decision-making skills
• Takes initiative and is assertive/aggressive

We are looking for a dedicated Senior/Executive to join our SingHealth Staff Protection Office. Reporting directly to the Chief Operating Officer (Workplace Safety), you will serve as the key point of contact for SingHealth institutions, providing guidance and support in handling incidents of abuse or harassment involving patients and their next of kin.

In this role, you will work closely with frontline staff to ensure that all policies related to incident response are both effective and relevant. Your responsibilities will include managing immediate responses to incidents, overseeing reporting processes, and coordinating post-incident management strategies. You will also play a pivotal role in cascading and implementing Standard Operating Procedures (SOPs) across institutions and preparing comprehensive reports to support management decision-making.

As part of the team, you will lead the implementation of the Staff Protection Programme, which is focused on promoting safety, preventing incidents, and protecting staff. Additionally, you will provide secretariat and administrative support to the Staff Protection Council, drive initiatives to enhance staff protection strategies, and take on special projects as needed.

Requirements

• Bachelor’s Degree in any discipline
• Relevant experience in the healthcare industry and patient care operations will be advantageous
• Good organisational skills with the ability to perform analytical and coordination work
• Independent team player with initiative