ECO cum WSH Coordinator

Job Description

i) To work with the PM to comply with environmental, health & safety (EHS) laws laws, advise PM on environmental remediation measures, carry out site inspections and to engage workers and stakeholders on maintaining good environmental health standards

ii) Work with the PM to draw up, implement and monitor effective environmental management plans, including reviewing them when necessary:

· Prepare & submit to the PM the Site Environmental Control Programme before work commences at the worksite.

· Prepare & submit to the PM the Site Environmental Control Report once every two weeks.

iii) Inspect the construction site to ensure all facilities, equipment and operations do not pose any environmental health hazard;

iv) Inspect the on-site canteen, worker’s quarters, if any, and dining areas to ensure that good hygiene practices are being observed, and the areas are well maintained with good housekeeping.

v) Identify and discuss environmental health irregularities or potential lapses with the PM, and recommend corresponding measures to prevent or rectify such concerns;

vi) Attend to all feedback on any irregularities and inform the PM accordingly;

vii) Assist the authorities to investigate outbreaks of infectious, vector-borne or food-borne diseases at the construction site; and

viii) Organise campaigns, training courses and other activities, where required, to develop and sustain the interest of workers in maintaining good environmental health standards.

ix) Conduct inspection of the ECM at the worksite in accordance to ECM plan

x) Maintain records of all inspections.

xi) Advice the PM & project team members on the implementation of the EHSMS & implement the EHSMS.

xii) Assist the PM identify any unsafe work condition or unsafe work practice which is carried out in the worksite;

xiii) Recommend to the PM to implement such reasonably practicable measures to remedy the unsafe work condition or unsafe work practice;

xiv) Assist the PM implement such reasonably practicable measures referred to in (xiii) or safe work procedures.

xv) Advice the PM & the project team members on the implementation of the EHSMS.

xvi) Implement the EHSMS.

xvii) Stop the work or recommend to the PM / WSHO to stop the work if it is deem not safe for the work to continue.

xviii) Inform the higher level of management (e.g. Project Director) if conflict between EHS issues & operational considerations at the worksite cannot be effectively resolved.

xix) Report to PM

xx) Perform any duties assigned by PM.

Job Requirements

• Registered ECO by NEA
• Diploma in Public Health
• WSQ Advanced Certificate in Workplace Safety and Health
• Min 3 years of experience in the building & construction industry

Job Description:

• Competent in reading and understanding drawings and perform measurements.
• Competent in preparing Bills of Quantities.
• Competent in understanding tender/contract/document/specifications/terms of contract
• Competent in analysing quotations/prices/rates, build-up rates and perform pricing
• Competent in performing contract administration including but not limiting to valuation of payments and variations claims in accordance to contract requirements
• Competent in performing all tender activities necessary for the procurement of new projects
• Competent in performing any other activities in connection with the businesses of the holding company
• Competent in working independently as well as with a team
• Participate in any activity ancillary to the company's other objectives e.g. charity events
• Competent in completing required obligations within stipulated timings and other constraints

Job Requirements:

• Bachelor's Degree in Quantity Surveying
• Minimum 3 years of working experience, preferably in the construction industry
• Proficient in Microsoft Office Tools

Roles & Responsibilities:

• Prepares, develops, finalises, effects, modifies and monitors the long term, short term, annual and periodic budgets and plans for the organisation. Update Owners about their progress and provides logical and rational explanation for variations in their achievement.
• Controls the operations of the organisation including financial, engineering, procurement and administration by providing management support and direction to departmental heads and their respective teams. =
• Responsible to ensure the development, enforcement, maintenance and updating of suitable systems, policies and procedures within the organisation, in order for the company to carry on its activities smoothly. Coordinates, reviews and approves the preparation of policy manuals, safety standards and quality guidelines and ensures the adherence of company employees to these documents.
• Responsible to ensure the profitability of the company and return on investment for the owner/partner. Approves the pricing for tenders/projects, ensures that project expenses are well within the contract price and monitors the income and expenditure of the company for budget compliance and cost control. Performs regular analysis on the fiscal health of the organisation, takes suitable remedial measures if required, and re-orients the organisation towards financial sustenance.
• Maintains relationship with old and existing clients/consultants/contractors/sub-contractors with regular follow up meetings and sources new clients by applying a focussed marketing approach. Presents the company and its activities to clients, pre-qualifies, tenders, negotiates and finalises new projects for the company to execute.
• Responsible for the recruitment of qualified, skilled and experienced personnel and their termination. Monitors employee productivity and performance in a periodical manner and ensures the provision of professional and personal growth opportunities. Provides motivation, leadership initiative, guidance to the employees and ensures the maintenance of high morale within the company. Ensures the application of fair, ethical and nondiscriminatory employment practices and provides an equal employment opportunity environment within the organisation.
• Assesses and evaluates market conditions, trends, associated risks and sets out suitable solutions to overcome downturns, crises and abnormalities. Continuously identifies and develops opportunities for the company to expand its products, services, functions and area of operation
• Performs other duties as assigned by the Owner.

Requirements:

• Graduation from a four-year college or university with a degree in civil engineering, or closely related field
• A minimum of eight years specific experience including multiple projects management in engineering, construction management or in a closely related field of building structures.
• At least two years responsibility in an operational role covering responsibilities of estimation, planning, purchase, project management, accounting departments/individuals. Previous experience or close association in a role with full operational responsibility in a construction environment.

• To assist the Project Manager or Project Engineer in the daily execution of work.
• Inspecting construction sites regularly to identify and eliminate potential safety hazards.
• Enforcing site safety rules to minimize work-related accidents and injuries.
• To supervise the work of sub-contractors and in-house workers.
• To work closely with other site operations staff to meet the project schedule.
• Ensure installation is carried out as per construction drawings.
• To monitor the progress and quality of work being performed by workers.
• Ensure that works are executed within an acceptable standard of workmanship.
• Attend the daily tool-box meeting and convey clear instruction accordingly.
• Understand and ensure compliance with project requirements and scope of work.

Job Description:

• Managing the design and coordination of a team of M&E coordinators, Engineers, and BIM modellers.
• Liase with consultants on matters relating to all M&E works.
• Participate in technical meetings and site meetings.
• To assess and resolve any technical or site issues related to M&E drawings and M&E work with consultants and subcontractors
• On-site supervision of work progress
• Maintaining schedules and coordinating the work of subcontractors.
• Assist in finalising accounts of MYE Sub-contractors.

Job Requirements:

• Degree or Diploma in Engineering or Construction related degree
• At least eight (8) years of relevant experience as M&E Manager in large scale projects is an advantage
• Highly motivated, independent, initiative and responsible.
• Great communication and interpersonal skills.

• Reports directly to QA manager
• Develope Quality Manual
• Conduct in-house quality training
• Lead and guide site staff and contractors to achieve qulaity workmanship
• Conduct preiodic site survelliance with QA Supervisors
• Prepare inspection test plans
• Collate and report non conformanaces
• Attend site consultant/ coordination meetings
• Produce progress reports
• Mininum 4 years experience in related field
• Understands the requirement and criteria of CONQUAS 21; preferbaly with exposure to Quality Marks inspection procedure and preparation
• Conduct defect investigation and identification
• Proficient in Microsoft Office; Excel/ Words/ Powerpoint
• Good command of English
• Selt motivated
• indepentent

Job Description:

· Able to install and repair electrical wiring, systems & fixtures in buildings.

· Assist the operations teams with electrical troubleshooting and repairs

· To perform corrective / preventative maintenance on equipment

· Having experience installing and repairing plumbing fixtures

· Ensure that the work area is safe and clean

• To develop and submit a Project Interface Plan (PIP) which manages the interface management process throughout the project life cycle.
• To be responsible for the project wide internal and external interface management activities.
• To conduct weekly interface meeting with all stakeholders and interface manager of all contractors (including SC, direct contractors / specialists to be appointed)
• To manage and coordinate with interface manager of all systems to incorporate the finalised interface details into the overall combined services plans /BIM
• To work with BIM coordinator and be responsible for the BIM coordination for development of BIM Model.

Job Requirement

Shall possess an Engineering Degree with at least 10 years of relevant working experience in M&E services coordination OR

A diploma with at least 20 years of relevant working experience in M&E services coordination.

Job Description

• Prepare a lifting plans normal and critical lift plans
• Coordinate and Supervisor overall site lifting activities
• Conduct coordination and logistic meeting with subcontractors
• Visual Inspection of Cranes and lifting equipment’s
• Help site team in planning proper lifting equipment for required lifting works

Requirements

• 5 Years and more as Lifting supervisor/coordinator at construction site
• Lifting appointed person certified will be preferred
• Familiar with rigging techniques of construction material

Responsibilities:

· Coordinating, planning and conducting the project plan

· Project formulation and monitoring progress and schedule

· Effective communication and co-ordination between project participants

· Attend site meeting, inspect, monitor and report project progress.

· Submit and update monthly project status

· Perform other duties or tasks as assigned by immediate superior or Project Manager

Requirements:

· Degree in Civil/Structural Engineering or its equivalent

· At least 3 years relevant working experience as Project Engineer in main contractor office

· Proficient in MS Office Word, Excel and Project Scheduling software

· Bilingual with good communication skills

Job description

· Responsible for the planning, management, and coordination of the MEP Subcontractors testing & Commissioning activities.

· Ensure that the required tests and inspections are performed in accordance with the approved plan.

· Follow-up with subcontractors to resolve any deficiencies that are found.

Job requirement

· Minimum of 10 years engineering experiences in construction industry with relevant diploma.

· Minimum of 5 years construction experience for similar size complexity projects & complexity projects.

1. Primary Responsibilities

• Project Maintenance Management: Oversee maintenance teams’ tasks across multiple project sites, ensuring timely, cost-effective, and quality service.
• Scheduling & Planning: Develop, schedule, and rectification procedure and ensure timely repairs.
• Budgeting & Cost Control: Manage maintenance team expenditures and track expenses, and identify cost-saving measures.
• Quality Assurance: Ensure maintenance team meets industry standards, client requirements, and conmpany’s quality guidelines.
• Risk & Compliance: Ensure adherence to safety protocols, compliance with regulatory and company standards, and mitigate risk on project sites.
• Client Liaison: Act as the primary contact for clients and consultants concerning maintenance and defect rectification.
• Vendor & Supplier Coordination: Manage relationships with suppliers, negotiate service contracts, and ensure materials meet project specifications.

2. Leadership and Team Management

• Team Supervision: Lead and manage maintenance staff, including training, scheduling, and performance evaluations.
• Training & Development: Ensure that maintenance personnel are trained in safety procedures, equipment handling, and troubleshooting.
• Performance Monitoring: Regularly assess team performance, address any gaps, and promote staff development and skill enhancement.

3. Technical Skills and Knowledge

• Technical Knowledge: Deep understanding of construction technology and method used in the industry and expertise in their maintenance and preventive requirements.
• Problem Solving: Diagnose and resolve maintenance issues efficiently to minimize inconvenience to client.
• Safety Standards: Strong knowledge of workplace safety and health regulations, particularly in construction site.
• Software Proficiency: Familiarity with relevant software for planning and record-keeping.

4. Reporting & Documentation

• Maintain accurate records of maintenance activities, including work orders, inspection reports, and incident logs.
• Provide regular updates and detailed reports to management and clients on equipment performance, maintenance costs, and any challenges.

5. Qualifications

• Education: Degree in engineering, facilities management, or related field.
• Experience: At least 7-10 years of experience in a maintenance role, with prior leadership experience preferred.
• Skills: Strong communication, negotiation, and project management skills.

6. Key Competencies

• Analytical Thinking: Ability to assess needs and identify areas for improvement.
• Attention to Detail: Precision in inspection, rectification procedures, and adherence to protocols.
• Time Management: Efficiently prioritize tasks and manage resources to meet deadlines.
• Adaptability: Ability to handle unexpected challenges and adjust maintenance plans as needed.

Job description

· Review the safety management system and offer suggestions for enhancement.

· Implement and oversee the ECM Plan as per requirement.

· Collaborate closely to monitor earth control activities at different stages of the project.

· Manage on-site safety audits.

· Investigate incidents/accidents and propose corrective actions to prevent recurrence.

· Ensure staffs adhere to statutory acts, regulations, company safety protocols, and industry codes.

· Demonstrate effective communication abilities to interact with colleagues, clients, and governmental bodies.

· Perform any other ad-hoc duties as assigned.

Requirements

· Diploma in Workplace Safety & Health or equivalent

· Registered WSHO with ECO and ECMO

1. Primary Responsibilities

• Quality Planning & Documentation: Develop, implement, and maintain a project-specific Quality Assurance (QA) and Quality Control (QC) plan that aligns with BCA CONQUAS standards, ensuring all quality processes meet assessment criteria.
• CONQUAS Compliance Monitoring: Monitor construction activities to meet CONQUAS requirements, ensuring each component (structural, architectural, and M&E works) adheres to the system’s quality benchmarks and detailed criteria.
• Material Inspection & Testing: Oversee the inspection and testing of materials used on-site, ensuring conformity with BCA-approved materials and standards under CONQUAS. This includes managing third-party testing agencies when required.
• Site Audits & Inspections: Conduct frequent site inspections and audits focused on CONQUAS criteria, including workmanship, material application, and defect minimization in structural, architectural, and M&E works.
• Non-Conformance Management (NCR): Identify, document, and address non-conformances, particularly those impacting CONQUAS scoring. Recommend corrective actions, ensuring rectifications align with quality standards to avoid future issues.

2. Collaboration with Project Team

• Coordination with Site Engineers & Supervisors: Work closely with site engineers and supervisors to ensure construction methods comply with CONQUAS specifications, providing guidance on quality protocols and rectifications as needed.
• Client & Consultant Interaction: Act as the primary quality liaison with clients and consultants, updating them on QA/QC matters and addressing quality concerns directly related to CONQUAS scoring.

3. Reporting & Documentation

• Quality & CONQUAS Reports: Prepare quality and assessment reports, including checklists and summaries that reflect compliance with CONQUAS scoring standards, inspection records, and non-conformance resolutions.
• Record Management: Maintain comprehensive QA/QC records, including BCA CONQUAS documentation, material certificates, inspection logs, and testing results.

4. Technical Skills and Knowledge

• CONQUAS Standards & Guidelines: In-depth knowledge of BCA’s CONQUAS standards, especially in structural, architectural, and M&E works criteria, assessment scoring, and inspection guidelines.
• Inspection Techniques & Tools: Proficiency in inspection techniques and tools that align with CONQUAS criteria, including non-destructive testing (NDT) and visual inspection practices.

5. Training & Development

• CONQUAS Training for Team: Train the construction team on CONQUAS requirements, quality assessment protocols, and best practices to enhance work quality and scoring.
• Continuous Improvement: Promote continuous quality improvement initiatives that reflect CONQUAS requirements, addressing observed quality gaps with updates to procedures.

6. Qualifications

• Education: Diploma/ bachelor’s degree in civil engineering, construction management, or related field
• Experience: 3-5 years of experience in a QA/QC role within the construction industry, with added experience in managing Quality Marks assessment processes or certifications a significant advantage
• Certifications: BCA-Approved CONQUAS training or relevant quality certification such as ISO 9001:2015 in Quality Management Systems.
• Skills: Strong analytical skills, attention to detail, and the ability to assess and improve quality standards.

7. Key Competencies

• Attention to Detail: Strong focus on details in line with CONQUAS quality metrics for structure, architecture, and M&E works.
• Communication Skills: Ability to clearly communicate quality standards, updates, and CONQUAS requirements to all team members and stakeholders.
• Problem Solving & Decision-Making: Effective in resolving quality issues that may affect CONQUAS scoring, ensuring timely solutions.
• Adaptability: Ability to adjust processes to meet dynamic project needs while adhering to CONQUAS standards.

1. Assist to identify and correct unsafe conditions and work practices;
2. Provide recommendations for improving safety in the workplace;
3. Ensure that all works are performed according to the approved method statement, risk assessment, and SWP;
4. Maintain all equipment and machinery on site and ensure all required certificates are in place;
5. Conduct and keep record of daily WSHE inspection;
6. Carry out daily joint WSHE inspection together with sub-contractor’s WSH Coordinator/ Supervisor and timely rectify any unsafe acts or conditions;
7. Maintain documentation of the company's safety procedures, accidents and related events;

Accounts Executive

Hexacon Construction is seeking an accounts executive immediately.

What’s on offer

This is a permanent role based at Balestier Road.

· SGD 2,600 - $3,700 monthly, depending on experience and qualifications

· 5-day work week

· 14 days annual leave

· 3 months probation

Reporting to the Finance Controller and Senior Accountant, you are responsible for:

· Maintain accounting general ledgers within accounting software and on Excel

· Perform general ledger, bank, supplier statement reconciliation

· Assist in preparing monthly management accounts, quarterly GST Form 5

· Assist with auditor and tax agent queries, providing of relevant information

· Accurate data entry into claims submission, supplier and payment processing

· Other ad-hoc duties

The successful candidate should:

· Degree / diploma in accountancy

· Ideally, 1-3 years of accounting experience. However, fresh degree / diploma graduates are still welcome to apply

· Meticulous, with an eye for detail

· Spoken and written English proficiency

· Candidates with prior experience with IFCA accounting software will have a significant advantage, but not a must

· Live within the Balestier / Toa Payoh / Bishan area

Job Description:

• Manage the recruitment process for construction staff (e.g., engineers, coordinators, managers) and site workers.
• Utilize job portals, recruitment agencies, and social media platforms to identify potential candidates.
• Conduct initial resume screenings and shortlist candidates for interviews with hiring managers.
• Schedule interviews with candidates and assist in the interview process.
• Support in making job offers and negotiating terms with selected candidates.
• Maintain and update recruitment records, including interview outcomes and new joiner documentation.
• Oversee the onboarding process for new joiners, including briefing them on administrative details and benefits.
• Organizing recruitment campaigns, job fairs and other events to attract candidates.
• Handle processes related to work pass applications and statutory requirements for housing, medical etc.

Requirements:

• Diploma/Degree in Human Resources, Business Administration, or a related field.
• 1-2 years of experience in recruitment, preferably within the construction industry.
• Strong understanding of recruitment processes for both construction staff and workers.
• Knowledge of local employment laws, work permits, and foreign worker regulations.
• Excellent organizational, communication, and interpersonal skills.
• Proficiency in Microsoft Office.

Job Description

· Control and manage incoming and outgoing documents

· Responsible for full inventory of documentation & its easy retrieval

· Review and maintain the accuracy of records, updating where necessary to ensure they are up to date.

· Communication with relevant persons who need to submit documents

· Coordinate with project team to ensure compliance of all documentation

Skills / Qualifications

· Candidate must possess at least a Nitec in Business Studies / Engineering preferred

· At least 1 year of relevant experience in a construction company.

· Detail-oriented and organised

· Highly motivated, well organized, resourceful and proactive

· Possess good interpersonal skills with sound written and oral communication skills

• Project lead experience in actual projects
• Facilitating BIM Coordination meeting
• Planning BIM processes
• BIM Legal and Contractual issues
• Organisation's adoption plan

Job requirement

• BIM quality check
• BIM authoring tool
• BIM design review
• BIM analysis tool
• BIM Coordination tool
• Project workspace
• BCAA specialist diploma

• Renowned Bookstore
• Basic $2000 - $2600
• Full Benefits (AWS + Staff Discount)
• 5 days (Rotating off day)
• Multiple Locations Available

Responsibilities:

• Team Support: Assist in supervising staff, managing schedules, and ensuring smooth store operations.
• Customer Assistance: Provide excellent service, address customer inquiries, and resolve minor complaints.
• Inventory Assistance: Support inventory management, restocking, and maintaining accurate stock records.
• Sales Support: Assist in meeting sales targets, implementing promotions, and optimizing store performance.
• Store Upkeep: Help maintain store cleanliness, organize displays, and ensure merchandising standards.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R1873990 | Lucky Lee Ding Cong

Maintaining knowledge and ensuring compliance wit departmental policies and standard service procedures.

Supervising efficient upkeep of tools through proper usage of equipment and devices.

Analyzing all guest requirements and preparing plans to resolve customer care related issues and satisfy guests.

Creating menus.

Overseeing food and beverage inventories.

Managing cooking staff.

Monitoring employee morale and conducting annual appraisals.

Overseeing collection and submissions of payroll related items and leave forms to the Human Resources.

Supervising efficient upkeep of tools through proper usage of equipment and devices.

Analyzing all guest requirements and preparing plans to resolve customer care related issues and satisfy guests.

Creating menus.

Overseeing food and beverage inventories.

Managing cooking staff.

Monitoring employee morale and conducting annual appraisals.

Overseeing collection and submissions of payroll related items and leave forms to the Human Resources.

Job Scope:

Install, configure, troubleshoot, and support servers running on Windows and Linux operating systems.

Perform routine system maintenance tasks such as patching software, updating firmware, and conducting hardware evaluations/upgrades.

Manage user access control by setting up accounts, permissions, and ensuring adherence to company policies regarding data security.

Oversee the administration of internal resources including Active Directory (for Windows) or LDAP (for Linux), file sharing services, and print servers.

Monitor network traffic/server utilization to identify potential issues before they become critical problems; implement performance tuning strategies when necessary.

Administer SAN/NAS environments including disk provisioning, LUN management, zoning, fiber channel networking etc.; ensure efficient operation with minimal downtime through proactive monitoring/maintenance practices

Develop/implement backup recovery plans for critical data stored across various platforms;

Conduct regular audits/capacity analysis reports in order to plan for future growth needs while optimizing current resource usage.

Job Requirements:

Degree in Computer Science, Information Systems or related field preferred;

Minimum 5 Years work experience will be considered

Proficient in BIM software and AUTOCAD will be an added advantage

Good interpersonal and communication skills

Proven track record managing both Windows/Linux server environments

Experience with virtualization technologies like VMware/Hyper-V is highly desirable

Knowledgeable about configuring/maintaining enterprise-level storage solutions (SAN/NAS)

Strong analytical/troubleshooting skills combined with excellent communication abilities

Ability to document processes/procedures clearly concisely

Able to handle any adhoc jobs based on our Industry

Must be responsible for working with wood to build and repair structures and other items and they also may have to select and source appropriate materials depending on project needs. Must be able to construct, install, and repair a variety of residential, commercial, and industrial structures and fixtures includind the demolition and maintenance of these structures and fixtures.

-Order supplies to stock inventory appropriately

-Verify and endorse all incoming products & raw materials

-Help in the preparation and design of all food and drinks menus.

-Produce high quality plated both design and taste-wise

-Assist in preparation, washing, peeling, chopping, cutting all food ingredients.

-Cleaning the food preparation equipment and other kitchen tools, housekeeping.

-Ensuring the food preparation areas are clean and hygienic.

-Comply with and enforce sanitation regulations and safety standards

-Resourcefully solve any issues that arise and seize control of any problematic situation

-Monitor portion control to meet requests and minimize waste

-Maintain a positive and professional approach with customers

-Ready to work split shift and overtime
-Willing to work on weekends and public holiday

· Must be able to work night shift and split shift

· Must be able to work extra hours or weekend if needed

40 Hours Per Week
5 days Work Week (Rotating Shift From Monday-Sunday)
Central area

$2600 - $2900
- Joining Incentive
- Birthday Leave
- Employee Discount
-Optical/ Dental Claim
-Career Progression

Job Description

•To lead a team up to 5paxs and above of retail staffs for day to-day sales and

operations duties

•To plan duty roster and sales targets (Scheduling/Roster)

•To deliver good customer service in fast paced environment

•To maintain Visual Display and Merchandising of retail store according to

company’s standard

•To guide staff on POS and Cashiering transaction

•To conduct on-the-job training and customer service training for the retail staff

•To prepare weekly and monthly reports

Job Requirements

•Minimum GCE “O” Level with at least 2 years of supervisory experience in retail

industry will be an added advantage

•To have positive attitude and with passion in retail

•Like interacting with customers and have an eye for details

•Good Interpersonal and communications skill

•Able to multitask and work under pressure

•Able to start work at short notice

EA Personnel Name: YEO AHN AHN

EA Personnel No: R22109014

EA License No: 21C0845