Job Description & Requirements

• Responsible for the implementation and monitoring of Workplace Safety & Health and Environment Management Systems at work sites.
• Conduct regular WSH inspections and follow-up actions to ensure safety compliance
• Ensure all Health & Safety policies, procedures, rules and regulations are adhered to and are regularly reviewed, updated and communicated.
• Ensure the Company meets its statutory obligations in all areas pertaining to health, safety and welfare at work, including statutory training and reporting
• Ensure the completion and regular review of risk assessments for all work equipments and operations
• Ensure all accidents are documented, investigated and recommended improvements implemented.
• Coordinate the development of health & safety policies, systems of work and procedures.
• Inspect project sites to ensure safety measure are being carried out at all times

Requirements:

• Possess relevant safety certificates (Eg Advanced Certificate in WSH, Safety Officer's Course or equivalent)
• Minimum 3 years of relevant working experience in Building Construction
• Familiar with ISO45001, ISO 9001 & ISO 14001

• Responsible to oversee the day-to-day planning, management, operations and safety of facilities management works and service with adequate administrative staff.
• Responsible to carry out systems' heath and obsolescence monitoring, obsolescence management, crisis management, fire safety management, investigation and carry out rooy cause analysis of the incident, not limited to accident, power outage, and systems failure.
• Shall be full-time on-site
• Contract period Jan’25 – Jun’25

• Troubleshoot and carry out minor repairs (electrical, plumbing, builder, etc) for the building and related facilities.
• Supervise sub-contractors who carry out approved repair works and scheduled maintenance in the building.
• Assist Facilities Executive & officer to execute preventive maintenance regime and/or ad-hoc upgrading project and monitor the work progress.
• Assist Facilities Executive & officer to attend to tenant’s feedback on the building and related facilities.
• Provide guidance and coaching to junior staff when required.
• To carry out routine servicing in M&E systems (i.a.w. operation requirements).
• To provide initial fault response reported by client.
• Updating and follow up on completed/outstanding faults status.
• To supervise specialist contractors maintenance activities (as & when required).
• To carry out shift duties.
• To carry out additional tasks as instructed by company/ immediate supervisor.

Candidate must process good interpersonal skill, processing of diploma will be preferred with 3 years working experience, knowledge of excel , experience in purchasing of materials at construction site and helping out in the ad hoc and administration in paper works.

Job Qualifications:

Willingness to work in non-climate-controlled conditions (heat, cold, outdoors)

Ability to lift heavy materials and equipment

Willingness to work overtime

Willing to work midnight shift

Excellent customer service skills

Min 2 Years relevant working experiences

Secondary School / high school / diploma or equivalent

Carpentry and renovation experience a plus

Job Responsibilities:

Cut tiles and shape them properly to ensure they fit around obstacles and in tight corners and odd spaces using power and hand tools

Form tile beds using concrete, plaster, mastic, cement glue or mortar utilizing tools such as screeds, brushes and trowels

Align tiles and straighten them with straightedges, levels and squares to ensure patterns are even and precise

Cut, install, polish and surface granite and marble and ensure accuracy during the installation process for lasting results

Prepare various surfaces for tiling with waterproofing material or lath and by cleaning the surfaces properly

Create decorative wall and floor designs by laying and setting mosaic tiles in kitchens, bathrooms and living rooms

Tap tiles into place carefully using tools to properly adhere tiles to the base, making sure not to break or damage tiles

Follow blueprints precisely and mark and measure surfaces that need to be tiled to determine how to go about job

Job Qualifications:

Willingness to work in non-climate-controlled conditions (heat, cold, outdoors)

Ability to lift heavy materials and equipment

Willingness to work overtime

Willing to work midnight shift

Excellent customer service skills

Min 2 Years relevant working experiences

Secondary School / high school / diploma or equivalent

Carpentry and renovation experience a plus

Job Responsibilities:

Cut tiles and shape them properly to ensure they fit around obstacles and in tight corners and odd spaces using power and hand tools

Form tile beds using concrete, plaster, mastic, cement glue or mortar utilizing tools such as screeds, brushes and trowels

Align tiles and straighten them with straightedges, levels and squares to ensure patterns are even and precise

Cut, install, polish and surface granite and marble and ensure accuracy during the installation process for lasting results

Prepare various surfaces for tiling with waterproofing material or lath and by cleaning the surfaces properly

Create decorative wall and floor designs by laying and setting mosaic tiles in kitchens, bathrooms and living rooms

Tap tiles into place carefully using tools to properly adhere tiles to the base, making sure not to break or damage tiles

Follow blueprints precisely and mark and measure surfaces that need to be tiled to determine how to go about job

1. To liaise with building Main Con on Archtecture works and details for projec coordination

2. To liaise with sub con on project details and installation issued

3. To work on project schedule and minor change on the details if needed minor changes on the details drawings.

4. To liaise with builder Safety officer for the safety issued.

5. To liaise with office for Miscellaneous site issued.

• Manage, design, develop, create and maintain small-scale through to large-scale construction projects in a safe, timely and sustainable manner.

• Conduct on site investigations and analyze data (maps, reports, tests, drawings and other).

• Carry out technical and feasibility studies and draw up blueprints that satisfy technical specifications.

• Assess potential risks, materials and costs.

• Provide advice and resolve creatively any emerging problems/deficiencies.

• Oversee and mentor staff and liaise with a variety of stakeholders.

• Handle over the resulting structures and services for use.

• Monitor progress and compile reports in project status.

• Manage budget and purchase equipment/materials.

• Comply with guidelines and regulations including permits, safety etc and deliver technical files and other technical documentation as required.

• Working with a team of fellow engineers and construction crews to organize and complete projects.

• Troubleshoot and carry out minor repairs (electrical, plumbing, builder, etc) for the building and related facilities.
• Supervise sub-contractors who carry out approved repair works and scheduled maintenance in the building.
• Assist Facilities Executive & officer to execute preventive maintenance regime and/or ad-hoc upgrading project and monitor the work progress.
• Assist Facilities Executive & officer to attend to tenant’s feedback on the building and related facilities.
• Provide guidance and coaching to junior staff when required.

• Reviewing construction plans and preparing quantity requirements.
• Liaising with site managers, clients, contractors, and subcontractors.
• Scrutinizing maintenance and material costs, as well as contracts to ensure the best deals.
• Preparing reports, analyses, contracts, budgets, risk assessment, and other documents.
• Advising managers and clients on improvements and new strategies.
• Keeping track of materials and ordering more when required.
• Documenting any changes in design and updating budgets.
• Establishing and maintaining professional relationships with external and internal stakeholders.
• Liaise with Reporting Superior and Project Managers on costing and variation works including final account with Consultants
• Attendance of site meetings /site visit where necessary.
• Generally covering the scope of a Quantity Surveyor from Pre to Post contract Works (e.g. Tendering to final account).

Manage all job site activty,arrange for all workers do work nicely and give them understand what they should need to do at their work site,some time need to do electrical trunking cabaleing work.mangae main-con derection and attend meeting with the main contractor.

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

• Request quotation and price negotiation with suppliers.
• Prepare purchase order, ensure timely delivery and follow through the complete procurement cycle.
• Responsible for construction material / machinery purchase and to maintain with proper record for receipts and issuance.
• Matching of supplier’s invoices with supporting documents such as PO & DO.
• Generate monthly purchasing report for management.
• Liaise with local and overseas suppliers.
• Administrative tasks on and ad-hoc basis.
• Take sufficient steps to minimize project risks.
• Handle the planning and preparation of company contracts.
• Liaise with and support the Project Manager to ensure the project is executed safely and properly.
• Ensure compliance with the company’s work health and safety policies, standards and procedures.
• Prepare monthly project reports and make presentations at meetings.
• Support negotiations of claims, manage contractual changes and resolve disputes or conflict resolution with Contractors.
• Assess and prepare claims from suppliers.
• Ensure project members use the contract correctly.
• English speaking, writing, and reading required.
• Candidate must possess at least Secondary School/O Level, Higher Secondary/Pre-U/'A' Level, Diploma, Advanced/Higher/Graduate Diploma Understanding of procurement process, Good Communication Skills

Cut, install, polish and surface granite and marble and ensure accuracy during the installation process for lasting results

Prepare various surfaces for tiling with waterproofing material or lath and by cleaning the surfaces properly

Create decorative wall and floor designs by laying and setting mosaic tiles in kitchens, bathrooms and living rooms

Tap tiles into place carefully using tools to properly adhere tiles to the base, making sure not to break or damage tiles

Tap tiles into place carefully using tools to properly adhere tiles to the base, making sure not to break or damage tiles

Align tiles and straighten them with straightedges, levels and squares to ensure patterns are even and precise

• Manage, design, develop, create and maintain small-scale through to large-scale construction projects in a safe, timely and sustainable manner.

• Conduct on site investigations and analyze data (maps, reports, tests, drawings and other).

• Carry out technical and feasibility studies and draw up blueprints that satisfy technical specifications.

• Assess potential risks, materials and costs.

• Provide advice and resolve creatively any emerging problems/deficiencies.

• Oversee and mentor staff and liaise with a variety of stakeholders.

• Handle over the resulting structures and services for use.

• Monitor progress and compile reports in project status.

• Manage budget and purchase equipment/materials.

• Comply with guidelines and regulations including permits, safety etc and deliver technical files and other technical documentation as required.

• Working with a team of fellow engineers and construction crews to organize and complete projects.

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

Job Description

· Preparation of precast shop drawings including plans, elevations, sections, details, anchorage, starter bar layout etc.

· Ensure and check that all drawings are done accurately

· To study all architectural and structural drawings necessary for the project

· Able to study and prepare fine details in shop drawings

· Able to use both 2D and 3D software

· Manage and update Master Drawing List

· Controls information coming in from Main Contractors and Consultants

· Prepare as built drawings upon completion of project

· Prepare documents and drawings for ST submission

· Housekeeping of project folders

Requirements

· Minimum ITE or Diploma certificate in BIM or Architectural/ Structural discipline

· Preferably 1 year experience in construction firm

· Preferably experience in 3D Cad, Rhino would be an advantage

· Good interpersonal and communication skills

· Preferably Singaporean/ PR

Benefits

· 5 days work week 8:30 to 18:00

· 2 days can be work from home if situation allows

· Training will be provided to use 3D precast software

· Salary commensurate with experience

· Salary range $2700 to $3600

• Answer and direct phone calls
• Organize and schedule appointments and meetings
• Maintain contact lists
• Produce and distribute correspondence memos, letters, faxes, and forms
• Assist in the preparation of regularly scheduled reports
• Develop and maintain a filing system
• Order office supplies
• Book travel arrangements
• Submit and reconcile expense reports
• Provide general support to visitors
• Provide information by answering questions and requests
• Take dictation

• Operating machinery with hydraulic and manual controls
• Performing pre-start checks and preparing equipment and machinery
• Selecting and fitting the appropriate attachments for each job, such as blades, buckets or scoops
• Digging up soil, rock, dirt and other materials
• Transferring the excavated materials from one place to another
• Loading soil and material onto dump trucks
• Consulting with building or construction professionals on-site regarding the job requirements

• Preparing, scheduling, coordinating, and monitoring of assigned engineering projects.
• Formulating project parameters and assigning responsibilities to the most capable employees and monitoring the project team.
• Interacting with clients, interpreting their needs and requirements, and representing them in the field.
• Performing quality control tasks on budgets, schedules, plans, and personnel performance and reporting on the project's status.
• Cooperating and communicating with the project manager and other project participants and collaborating with senior engineers to create more efficient project methods and to maintain the project's profitability.
• Reviewing the engineering tasks and initiating the necessary corrective actions.
• Developing specifications for the project's needed equipment.
• Creating frameworks to measure the project's metrics and data collection.
• Establishing field test methods and methods for monitoring the quality of those tests.
• Ensuring the project's compliance with the applicable codes, practices, policies, performance standards, and specifications.

• Responsible to oversee the day-to-day planning, management, operations and safety of facilities management works and service with adequate administrative staff.
• Responsible to carry out systems' heath and obsolescence monitoring, obsolescence management, crisis management, fire safety management, investigation and carry out rooy cause analysis of the incident, not limited to accident, power outage, and systems failure.
• Shall be full-time on-site
• Contract period Jan’25 – Jun’25

• Responsible to oversee the day-to-day planning, management, operations and safety of facilities management works and service with adequate administrative staff.
• Responsible to carry out systems' heath and obsolescence monitoring, obsolescence management, crisis management, fire safety management, investigation and carry out rooy cause analysis of the incident, not limited to accident, power outage, and systems failure.
• Shall be full-time on-site
• Contract period Jan’25 – Jun’25

Roles & Responsibilities

Responsibilities:

· Utilize CAD software to design and draft technical plans.

· Interpret and translate rough sketches and specifications provided by engineers and architects.

· Apply your knowledge of engineering and manufacturing principles to design functional products.

· Enhance architectural plans by incorporating details based on your understanding of building techniques.

· Clearly specify dimensions, materials, and production procedures for new products.

· Collaborate effectively with engineers and architects, working under their supervision.

Qualifications:

· Proven experience working as a Drafter or similar role.

· Strong understanding of engineering and/or architectural principles.

· Excellent attention to detail and a commitment to accuracy.

· Effective communication and collaboration skills.

· Specialize Construction Diploma, or any Degree above.

· Regrets Shortlisted will be notify, Thankyou.

*Email [email protected] Thankyou.

Job Details

Your job will consist of:

• Researching on areas for the business to expand into, and proposing ways to do so;
• Conducting and publishing market/industry research on the company website;
• Assisting with the drafting of proposals for clients, including the business development aspects;
• Designing of graphics where necessary for different purposes;
• Preparation of a content calendar and other relevant marketing/advertising work.
• Ad hoc work including, but not limited to company calendar management.

It is important for any potential applicant to understand our purpose, mission, and value.

Job Description

Assisting Project Engineer with daily site activities.

Formulation of procedures for construction activities.

Attendance and contribution for prestart, internal, HSE and client meetings.

Requirements

Atleast 2 - 3 years of working experience in construction field

Degree in Civil Engineering or its equivalent