Job Responsibilities:

1.Responsible for leading the implementation of BIM workflows and processes within a project or organization.

2.Able to handle Integrated Concurrent Engineering (ICE) meetings which are Internal and Coordinated Combined Services Model (CCSM) to work collectively and in parallel to resolve identified design and construction issues instantly using BIM models and to mitigate the latency in decision making and responses.

3.Coordinate with Consultants (AR/ST), System-Wide Contractors (SWC) & Sub-Contractors (MEP) within the project and the interfacing parties to ensure discipline-specific design and construction conflicts found in the clash detection analysis, have been identified, resolved, and rectified.

4.Using Navisworks to generate the Clash Detection Report and Bim Collab to enhance the report progress.

5.To review and validate the models created by different disciplines to ensure they are clash-free, accurate, and compliant with project requirements.

6.Liaise with Project Document Controller for accurate data transfer.

7.Participate in technical, design and consultants’ meetings to understand the latest onsite requirements and ensure drawings and designs are up to date.

8.Establishes and enforces BIM standards and quality control procedures to maintain consistency and accuracy in the BIM deliverables.

9.Developing and maintaining the BIM Execution Plan (BEP) and conducting regular audits to ensure compliance with the defined standards.

10.Oversee, coordinate, and manage his/her BIM Modelers to meet all BIM deliverables submissions and information exchange schedules as documented in the agreed BEP.

11.Assist project team in 3D models and 2D shop drawings.

12.Provide training and support to other team members who are less experienced with BIM software or modeling techniques.

13.Other ad-hoc duties assigned.

Programme Manager | Social Worker Study | Telok Blangah

Location: Telok Blangah

Working Days & Hours: 5.5 days | Mon-Fri: 9am to 6pm ; Sat: 9am to 1pm
Salary: $4700-$5500 (AWS + Performance bonus available)

Responsibilities:

• Manage a team of staff to ensure the smooth running of the programme’s daily operations and maintenance of our community service centre.
• Provide guidance and motivation to staff to achieve the programme objectives, develop workplans for the team in alignment with agency goals.
• Conduct internal and external environmental assessments to identify areas for development and improvement so as to better meet the needs of the clients.
• Oversee the curation and development of programmes based on needs of clients.
• Provide coaching and guidance for casework management, needs assessment and intervention plans.
• Perform casework management for complex issues and conduct home visits with the team, as needed.
• Ensure service standards are maintained through programme supervision, strong operational framework and monitoring of programme outcomes.
• Spearhead and sustain community outreach efforts through regular engagement and collaboration with external stakeholders (including volunteers, corporate partners, donors, FSCs, grassroots community).
• Oversee budgeting, financial planning of the programme including but not limited to funding applications and co-supporting fund-raising events.
• Work closely with all the corporate function teams to ensure smooth organisational processes.
• Any other duties as assigned by Deputy/Director or CEO to support the cultivation of the agency’s values, vision and mission within the team.

Requirements:

• Bachelor’s degree in social work, with a minimum of seven years of postgraduate professional experience in social work.
• Social work accreditation with SASW. Candidates with counselling experience and professional accreditation in this field may also apply.
• Possess at least 3 years of people management experience, with strong stakeholder management and people skills.
• Knowledge of relevant laws, regulations, and ethical standards governing social work practice.
• Must have the flexibility to be able to work on some evenings and Saturdays. (Time Off will be given)

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant

Job Responsibilities:

• Sort, inspect, and prepare items for cleaning.
• Operate laundry equipment, ensuring proper settings.
• Adhere to safety and hygiene protocols.
• Maintain accurate records and inventory.

Requirements:

• Previous laundry and dry cleaning experience preferred.
• Familiarity with laundry equipment operation.
• Attention to detail and strong organization skills.
• Physical stamina for prolonged standing.
• Adherence to safety and hygiene standards.

Working hrs: 9am – 6pm

EA License No: 23C1703

EA Personnel No: R1762582

EA Personnel Name: Wong Choo Sian

Social Worker | Office Hours | Need Social Work Degree | Buangkok

Salary : $3,500 - $4,500 (depend on exp)

Location: Buangkok

Working hours: Mon to Friday (rotating shifts)

1. 7.30am-4.30pm (AM Shift)
2. 10.30am-7.30pm (PM Shift)

Job Responsibilities

• Develop individualise care plans for residents
• Execute the care plan and monitor progress
• Develop and implement programmes and activities to meet the residents’ care needs
• Put up 6th monthly review reports and monthly interview records for about 50 residents

Requirements

• Degree in Social Work
• Preferably experience in Social Service Sector or related field

For complete list of jobs opportunities please visit

Supreme Full Jobs List

Part Time / Contract Staffing Telegram Group

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant

Job Description

• Transporting earthwork from site to site
• Perform daily routine checks and maintain the general cleanliness.
• Drive in a safe manner at all time and adhering to traffic rules & regulations stated in the Road Traffic
• Ad-hoc duties

Requirements:

• Class 4 License
• Proven working experience & good driving record
• Familiar with Singapore route

Social Worker Associate (Special Education) - Siglap / 5 Days [3770]

Salary Range: $2,500 - $4,500 (depends on experience)
Working Days: 5 Days Mon-Fri 8.30AM-6.00PM
Location: Siglap

Job Descriptions:
Admissions and Transitions

• To provide all the necessary administrative and statistical duties related to all admissions matters from application to the students are admitted to the school
• To schedule all the relevant interviews with parents
• To collate all relevant reports and send it to the relevant parties
• To collate and liaise with all relevant organisations such as SGEnable, SPED Schools, other VWOs, MOE AND MSF with regards to admissions and transitions
• To maintain admissions data in the Centre’s Student and Client Management System

Means-testing Duties for Voluntary Welfare Organisation Transport Services (VWOTS)/ School Based Financial Schemes for clients

• To administrate the ETS means-testing scheme
• To upkeep all the necessary administrative and statistical duties related to this scheme
• To maintain and upkeep all the necessary data and record- keeping for this scheme for the purpose of submission to the relevant authorities such as SGEnable, NCSS and MSF as required.
• To take on the liaison role in communicating with all parents and the Centre’s appointed bus vendor with regards to the scheme

Administration and Programme Development

• To continuously improve on the existing administration structure of the department
• To take minutes at all relevant meetings
• Handle all phone calls and emails enquiries
• Handles yearly audit enquiries
• Monitors budget spending

Social Work;

• Report to Senior Social Worker
• Co-work with social worker on cases
• Carry out Case Management
• Conduct Home Visit
• Administering Financial Assistance Scheme
• Case recording
• Any other job scope deems suitable for a Social Work Associate

Job Requirements:

• Possess a bachelor’s degree in social work / Graduate Diploma in Social Work, preferably with 2 – 4 years of relevant experience
• Experience in working with special needs children/adults would be an added advantage
• Eligible for professional registration with SASW

WhatsApp: +65 82026403

Email: [email protected]

14C7279 The Supreme HR Advisory Pte Ltd

R21103770 Chu Jenn Anne

Duties and responsibilities:

Planning and organizing construction projects, including developing project timelines, budgets, and resource plans.

Ensuring that all construction work is carried out in compliance with building codes, safety regulations, and other legal requirements.

Managing project teams, including architects, contractors, and other stakeholders, to ensure that projects are completed on time and within budget.

Monitoring project progress and making adjustments as necessary to ensure that projects are completed on time and within budget.

Collaborating with architects and other stakeholders to develop project plans and specifications.

Developing and implementing quality control procedures to ensure that construction work meets the required quality standards.

Providing technical guidance and support to project teams, including architects, contractors, and other stakeholders.

Maintaining accurate project records and documentation.

Develop and manage project schedules, budgets, and resources

Coordinate with architects, engineers, and contractors to ensure project success

Review and approve project plans, specifications, and contracts

Ensure compliance with building codes, safety regulations, and environmental requirements

Monitor project progress and make adjustments as necessary

Communicate project status to stakeholders and senior management

Manage project risks and identify opportunities for improvement

Provide technical support to project team members

Ensure quality control and quality assurance for all project deliverables

Lead project meetings and facilitate communication among team members

Assist in the development of cost estimates

Assist the project team with site safety documentation and coordination

Assist the project team with closeout of the project

Assist project accountant with monthly subcontractor billings and pay applications

Assist project manager with assigned tasks

Prepare, check/review, approve conceptual studies, designs and detailed project drawings, proposals, design criteria & specifications, project budget and schedules

Prepare quantity take-offs, cost estimates and staffing forecast for all phases of project and manage change orders

Deliver project adhering to quality norms, timescale and budget

Supervise, guide and mentor the project team and provide input for their performance evaluation

Support creation of a work environment that fosters openness, trust, communication, teamwork, empowerment, innovation, and satisfaction

Provide technical leadership and invest in developing capabilities of the team members

In-depth knowledge of road alignment, geometric design, junctions, roundabouts and interchanges and flexible/ rigid pavement design

Exposure to traffic engineering will be an added advantage

Prepares or assists in preparation of conceptual studies, designs, reports or proposals, design criteria, specifications, budget and schedules for projects of varying complexity

Perform the finite element modeling and structural analysis of various steel and concrete structures

Establish, track, and monitor material key quantities

Develop and update job execution plans

Develop and build external relations with client representatives, vendors, and subcontractors and interface closely with other discipline functions promoting Client Service Excellence

Review and approve vendor lists, prepare quotation requests/bid tabulations/purchase orders and review substitutions for technical acceptability

Establish and lead the squad check effort for vendor equipment documentation for assigned equipment

Support proposal and estimate activities

Execute project work in accordance with approved Activity Plans

Engage Fluor’s global community, promoting a OneFluor mindset

Monitor and support work performed by Fluor offices or other designated entities performing Distributed Execution Engineering

Direct and oversee audits

Create system and equipment designs that meet our customer contractual requirements and location specific codes and standards including, but not limited to ASME/ANSI, IBC, UBC, CSA, European Union Directives

Adhere to industry codes and standards department practices and procedures

Provide Engineering input to drafting team members to support creation of design drawings, bills of material (“BOM”s) and other design documentation

Review and approve completed design drawings and BOMs prior to issuance

Lead internal and supplier design reviews

Apply lean 6-sigma tools and methods to achieve cost effective, balanced designs

Perform mechanical, structural, or civil analysis as necessary to support new designs or improvements to existing designs

Drive effective solutions for emergent issues, with appropriate sense of urgency

Ensure timely completion of engineering activities within schedule objectives that meet internal and customer needs

Create new designs that meet safety, reliability, performance, maintainability, and cost objectives

Provide engineering inputs and solutions during all phases of design development and project implementation

Provide ad-hoc expertise during project execution to mitigate risks and generate opportunities

Initiate and or participate to Interface, co- engineering Meetings, design freeze sessions with other Team Members

Control and monitor design changes and design budget deviation

Report to Program Element Description (PED) and Civil Works (CW) Project Management (PM) during the course of the project

Preparing cost estimates, permit applications, plans and specifications, feasibility studies, and other technical reports

Managing field teams that are overseeing the collection of field samples (soil, groundwater, soil vapor, air), remediation pilot testing, construction oversight, and operation and maintenance of remediation equipment

Be focused on ensuring designs are delivered in compliance with client specifications and to the agreed programme and budget.

Execution of engineering & design works within budget and schedule

Working as Client Representative within a multi-disciplinary team, for supervision of the construction works which are being carried out under lump sum contracts

Lead and manage technical design processes on multi-disciplinary projects

Plan, monitor and supervise work of other engineers

Prepare technical reports, tender documents, bill of quantities, evaluate technical bids & reviews vendor/third party documents

Participate in Client and Contractor facing technical and progress meetings

Coordinate with the Client and Contractor and particular focus on liaising with relevant Authorities and overseeing wayleave applications

Co-ordination with other disciplines to resolve engineering issues during design development, review and check processes - to ensure design packages meet the relevant health, safety and environmental standards

Discussions with support engineers and designers regularly on scope, man-hours and schedule

Participate in the technical reviews and progress review of projects.

Undertaking civil engineering design, review and project management for a wide range of projects including land development, high density retail and other civil infrastructure

Commercial project delivery of a range of projects ensuring timeframes and budgets are met

Provision of specialist design and reporting expertise within a multi-disciplinary office

Management of client relationships on allocated projects including developers and contractors

Tertiary qualifications in Civil Engineering coupled with at least five years' experience within a consulting environment

Significant experience within the NSW market, ideally within the residential and commercial land development sector

Well-developed interpersonal skills to develop, maintain and enhance client relationships

Undertaking civil engineering design, review and project management for a wide range of projects including land development, road infrastructure, high density retail and other civil infrastructure

Manage a team of engineers / designers / drafters

Ability to communicate confidently and professionally with all levels of staff and clients

Technical management of junior staff

Undertake design reviews and checking

Be self-motivated and able to work both independently and as part of teams

The ability to work to time and cost budgets

A willingness to work with Clients and their project teams

Identify and input to activities in support of the wider business objectives that may draw upon skills in addition to those outlined above

Support Team Leader in work winning including representing the business at networking evets, preparing bids and tenders and establish, maintain and develop relationships with existing and prospective internal and external clients.

Requirement:

Bachelor's degree in Civil Engineering or related field

Minimum of 5 years of experience in construction project management

Strong knowledge of construction materials, methods, and regulations

Excellent communication and leadership skills

Ability to manage multiple projects simultaneously

Proficiency in project management software and tools

Experience in managing large-scale construction projects

Ability to read and interpret blueprints and construction plans

Knowledge of budgeting and financial management

Experience in managing and supervising construction teams

Strong problem-solving and decision-making skills

Duties and Responsibilities:

• Report to the Construction Manager
• To assist Project Manager on the day-to-day management of the site
• Lead site teams (up to 25 persons)
• Site supervision, establishment of daily reporting, planning and scheduling of daily activities, coordinate subcontractors, etc.
• Establish good relationship with all relevant partie
• Ensure site safety & compliance to authorities’ requirements
• Ensure Site required documents are in good order

Requirements:

• Diploma/Professional Degree in Engineering (Civil) or equivalent.
• Preferably Experience on LTA and PUB projects.
• Basic Experience in dealing with local Authorities / Stakeholders
• Problem Solving Mentality
• Strong Skills in work preparation, scheduling and supervision
• Prepared to work day or night shifts - 6 days / week
• Positive personality and good team player.
• Able to multi task and work in tight schedules.

• Assist in the implementation of the Integrated Management System for QEHS.
• Assist the PM in identifying and assessing any foreseeable risk arising from the workplace or work processes therein.
• Recommend to the PM reasonably practicable measures to eliminate any foreseeable risk to any person who is at work in that workplace or may be affected by the occupier's undertaking in the workplace.
• Recommend reasonably practicable measures to minimize the risk and Such safe work procedures to control the risk.
• Assist the management in organizing and promoting EHS activities and campaigns to raise the EHS awareness of all site personnel.
• Review the EHS Management System and recommendations for improvement of EHS and ensuring continual compliance with the project and work progresses.
• Ensure that all statutory regulations, code of practice, and company's EHS rules & regulations are implemented and complied with at the project site.
• Advise management on all matters about EHS.
• Conduct regular inspections and audits on the EHS provisions on site.
• Assist the PM in investigating all incidents and recording all findings to prevent the reoccurrence of similar incidents.
• Establish and maintain a positive EHS environment on the project site.
• Conduct monthly safety committee meetings.
• Involved in various safety events & initiatives.
• Performing ad-hoc job duties as assigned by management.

A. Main Responsibilities

1.

Operate the excavator machine in a safe and appropriate manner ,work in construction company in construction environment

2.

Perform upkeep and routine cleaning and maintenance of the excavator

3.

Perform daily Pre and Post check of the excavator to ensure it is in good condition at all time

4.

Comply with workplace safety and health requirements (eg: gloves to be worn when working in the sorting belt)

5.

Perform ad-hoc duties such as general work

Primary Roles:

• Perform Daily routine inspection on critical facilities (Generator, Air Con, etc)
• Attend day to day work orders maintenance of the properties and maintain proper maintenance checklist
• Respond to work order within the stimulated timing
• Supervision of Contractors during servicing
• Handle minor rectifications that can be rectified internally
• Troubleshoot power switches and light sets
• Perform multiple repair and maintenance tasks
• Assist in emergency drills and provide logistic support for any events held in the building
• Need to perform shift works (including Weekends and Public Holidays)
• Any other ad-hoc FM related duties

Relevant / Professional Cert:

• ITE, “O” Level, diploma and “A” Level or equivalent
• Experience in IFM related field is preferred.
• Training will be provided

Skills & Knowledge:

• Possess good technical knowledge
• Hands-on experience in Mechanical (ACMV) and Electrical maintenance, troubleshooting, and repair work
• Process Class 3 license

Behaviour/ Traits:

• Willingness to commit to flexible working hours, including weekends, shift work, and extended hours when necessary.
• Able to learn and adapt to the working environment Displaying honesty
• Physically fit and able to take physical requirements on the daily operational activities
• Communicating effectively
• Learning from mistakes
• Team player
• Pro-active, able to work independently
• Only Singaporean

Required at least 3 year working experiences in Singapore for M&E work

Required to have knowledge in Air-con and electrical work

Able to lead a team of worker to do required work at various job site

Able to read and provide solution for M&E work

Able to liase with customer

Have a valid driving licenses in Singapore

Able to do drawing for work completion.

Job Description

· Attend site visits and tender show round

· Propose and design simple yet sustainable landscape designs for specified sites

· Prepare quotes and landscape maintenance reports

· Coordinate work orders with ground crew

· Dealing with complaints from client on site

· Prepare maintenance schedule

· Monitor and recording of site staff attendance

· Handling few projects assigned and coordination

· To be responsible for the administrative and operational for landscape project aspects, including liaise with customers for project requirements and progress

· Facilitate on the job training program for new crew members and provide ongoing training for crew members’ skill development objectives

Requirements

· Degree/Diploma in Horticulture, Arboriculture or other related fields with minimum of 1 yr experience in landscaping industries

· Required language(s): English, Chinese (in order to deal with complaints from Chinese speaking client on site)

· Dynamic and energetic

· Good team player with ability to lead and multi-task

· Committed to work

· Required Skill(s): Microsoft Office

· Excellent interpersonal and communication skills

· Prefer candidates with horticulture or arborist knowledge

· On-the-job training provided

· Entry level candidates with the relevant Polytechnic / WSQ Diploma / Degree are welcomed

Working Hours and Office Location:

· 5.5-day work week

· Office location: Mandai Estate

· Work location: Various Sites

Job Responsibilities:

• Prepare Archi /Structrual/M&E shop drawing and as-built drawings
• Assist project team in plans, designs, site condition and method statement
• To co-ordinate with consultants, project team and sub-contractors on issuing of drawings Coordination & understanding in design and construction of a project
• Prepare Drawings using AutoCAD

Job Requirements:

• Nitec/Diploma in Building Drafting/Engineering or equivalent certificate
• At least 2 Year(s) of working experience in the related field

Job Responsibilities

• Plan, lead and monitor progress against the project plan
• Manages day-to-day operational aspects of projects
• Manpower planning, construction progress monitoring, preparation of master schedule.
• Liaise closely with clients, consultants, sub-contractors, relevant authorities and developers in resolving site issues and authorities’ compliances issues to avoid discrepancies.
• Oversee recruitment of manpower.
• Perform cost management to manage projects within approved budgets, include materials, manpower and machinery cost control for new and running projects.
• Procurement of raw material and oversee payments.
• To perform any other ah-hoc duties as and when assigned.

Requirements:

- Min Degree or specialised certificates.

- Min 2 years relevant experience

- Capable of multi tasking projects

Company’s Profile

An established local main-con company

Location: Ubi Area

Working Hours: 6 Days Work Week

Benefits:

• Basic S$ 6.5K Max
• Performance Bonus

Responsibilities:

• To assist Project Managers on all site matters and operations on site.
• Planning & deployment of all resources, facilities & the arrangement of these resources & facilities on site upon approval from the clients, consultant & PM.
• Schedule of works delegation to the work persons, sub-contractors & all employees on site.
• Administered the work schedule is in accordance to the approved master program.
• To convene meeting with the PM & Site team & Sub-contractors on all matters of work operation, methods and details of construction.
• To advise & instruct all work persons employed & the sub-contractors or suppliers on site operations matters.
• To make all necessary decisions on the methods & work operations issues whenever there is discrepancy upon approval from the PM, respective authorities or consultants to ensure the site smooth operations.
• To issue any stop work order, if necessary, on site whenever there any unsafe act or conditions that the CM deemed is unfit for the work person on site to carry on the work safely.

Requirements:

• At least Diploma in Civil & Structural related Engineering.
• Preferably possess at least 5 years’ of working experience on site operation.
• Knowledge in contract/ tender documents administration
• Team player with initiative.
• Strong leadership quality, self-motivated, performance oriented.
• Ability to meet deadlines and prioritize work.
• Possess excellent interpersonal, negotiation skills

Your recruiter for this job: WhatsApp Ian @ 8512 3517 for a quicker response.

Connect with me on LinkedIn: www.linkedin.com/in/your-recruiter-ian-fong/

Interested candidates may apply directly as well. For more job opportunities, follow SnatchJobs on

Telegram: https://t.me/sgfulltimers

Ian Fong | R22106545

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Job Responsibilities:

• Prepare Archi /Structrual/M&E shop drawing and as-built drawings
• Assist project team in plans, designs, site condition and method statement
• To co-ordinate with consultants, project team and sub-contractors on issuing of drawings Coordination & understanding in design and construction of a project
• Prepare Drawings using AutoCAD

Job Requirements:

• Nitec/Diploma in Building Drafting/Engineering or equivalent certificate
• At least 2 Year(s) of working experience in the related field
• AutoCAD and basic MS Office, Outlook, Word, Excel skills Competency in BIM/Revit Preferred.

Responsibilities:

• To be able to plan for assigned works on site
• Planning of tools and materials for the works required
• Planning of workers required for the works
• To be able to run work sites safely and responsibly
• Ensuring safety documents are prepared and placed on site in case of inspection

Requirements

• 5 years or more Singapore experience
• BCSS Certified
• Able to read drawings
• Able to communicate in English
• Preferably possess Class 3 license
• Have good interpersonal, communication and people management skills
• Ability to act in the best interests of the Company

Kindly include the following on your CV/Resume:

• Last drawn Salary
• Expected Salary
• Availability and Notice Period
• Recent photo
• Job applications sent to email will be ignored

Responsibilities:

• Lead and manage Precast façade specialist contractors.
• Review and manage design and technical issues with relevant consultants and specialist contractors to ensure submissions and site works are in accordance to contract specifications.
• Review structural details, connection details and provisions for water tightness, considering with installation method.
• Ensure delivery of samples, shop drawings, document submissions, BIM models and site works in accordance to project schedule.
• Ensure all necessary authority approvals are obtained in accordance to project schedule
• Coordinate all interfacing facade details with architectural, structural and M&E components.
• Monitor progress of façade fabrication and installation works and communicate regularly with the Project Manager
• Establish QAQC protocols / procedures to ensure to meet specifications and requirements.
• Conduct periodic technical meeting with consultants and specialist contractors & maintain inspection records and documentation of all completed works.
• Keep track on variation and claims of contract, time and cost implications and communicate information to Project Manager.

Requirements:

• Min 8 years of relevant work experience and 5 years experience in Precast Façade works.
• Possess a Diploma/ Degree in Architectural / Building/ Construction Civil Engineering or equivalent
• Good communication skills and a team player.
• Attentive to details.
• Candidates with experience in Revit / Navisworks will have added advantage

Job responsibilities:

• Review and revise the Safety Management System for continual improvement.
• Review, establish and upkeep the Safe Work Procedure and Risk Assessment for the main contractor, sub-contractors.
• Conduct safety training related to the activity based on Safe Work Procedure / Risk Assessment.
• Ensure risk assessments for all work activities are conducted and propose recommendation and also, review them when necessary.
• Conduct monthly WSH Committee Meeting and put up safety reports including safety indices.
• Conduct monthly Mass Toolbox Meeting and Daily Toolbox Meeting.
• Enforce house rules on all stake holders and take action when necessary for non-compliance.
• Work closely with the project team to eliminate security, safety, health and environment hazards.
• Establish, review, update and improve Workplace Safety And Health (WSH) procedures, measures and policies in accordance to statutory requirements.
• Ensure legal compliance to all statutory safety and environmental regulations and timely submission of mandatory documents.
• Monitor, update and improve company's BizSafe, safety management system, safety manual.
• Conduct investigations of WSH infringements and industrial accidents and recommend remedial actions.
• Facilitate and conduct internal auditing, to ensure compliance with ISO 14001 standards.
• Responsible for all incidents reporting and investigation.
• Lead and manage emergency situation.
• Lead and manage the project safety personnel.
• Lead and manage site WSH matters for both, the company and sub-contractors.
• Guide and train the Site Emergency Response Team (SERT) and also, organize drills.
• Conduct safety related training for the staff and sub-contractors including foreign workers.
• Liaise with MOM, NEA, PUB and other relevant authorities on all WSH issues.
• Any other duties that may be assigned.

Requirements:

• Degree / Diploma in Occupational Health, Safety, Engineering or relevant field preferred
• Minimum 5 years of relevant working experience
• MOM registered WSH Officer and Fire Safety Officer
• NEA registered Environmental Control Officer (ECO)
• Certificate in QEHS Internal Auditing (ISO 9001, ISO 14001 and OHSAS 18001)
• Familiar with regulatory requirements related to workplace safety and health, and all other aspects of safety
• Possess high level of initiative, strong interpersonal and communication skills

Roles & Responsibilities

Job Description

- Knowledge of accounting

- Perform accounting entries

- Issues invoices, process cheque payment and checking and

reimbursement of petty cash receipts

- Prepare payment vouchers and data entries keying in

- Familier in GST Submission

Job Requirement

- Diploma in Accounting

- Minimum 2 years working experience

- Good working attitude

Job Description:

Duties and Responsibilities

· acting as the main technical adviser on a construction site for subcontractors, crafts people and operatives.

· setting out, leveling and surveying the site;

· checking plans, drawings and quantities for accuracy of calculations;

· ensuring that all materials use and work performed are as per specifications;

· overseeing the selection and requisition of materials and plant;

· agreeing a price for materials, and making cost-effective solutions and proposals for the intended project;

· managing, monitoring and interpreting the contract design documents supplied by the client or architect;

· liaising with any consultants, subcontractors, supervisors, planners, quantity surveyors and the general workforce involved in the project;

· liaising with the local authority (where appropriate to the project) to ensure compliance with local construction regulations and by-laws;

· liaising with clients and their representatives (architects, engineers and surveyors), including attending regular meetings to keep them informed of progress;

· day-to-day management of the site, including supervising and monitoring the site labor force and the work of any subcontractors;

· planning the work and efficiently organizing the plant and site facilities in order to meet agreed deadlines;

· overseeing quality control and health and safety matters on site;

· preparing reports as required;

· resolving any unexpected technical difficulties and other problems that may arise.

Responsibilities:

• Review, coordinate and generate all architectural works including shop drawings for project.
• Supervise and inspect all Architectural works carried out by sub-contractors.
• Ensure compliance with Architectural specifications, and achieve quality aspect.
• Carry out architectural works scheduling, material requisition, cost control, project supervision and documentation
• Carry out quality inspection on site and ensure quality of work to be completed on scheduled time.
• Supervise all architectural works and ensure all works are carried out in accordance to approved specifications.
• Work closely with subcontractors on project progress and ensure timely work arrangements.
• Supervising the interior fit out works, coordination with sub-contractors.
• Liaise with respective sub-contractors on work methods and sequencing.
• Monitor progress, quality of worksmanship and compliance with contract requirements.
• Monitor the availability and on time delivery of materials / equipment to complete the construction work within schedule.
• Adherence to safety practices in the work place.

Requirements :

• Relevant Nitec/Diploma/Degree in Architecture or related field, National Construction Trade Certificate
• Minimum 3 years of supervisory experience in architectural works from Construction/ Building/ Engineering industry
• Prior experiences in Condo projects will be an added advantage

Responsibilities :

• Review and align M&E design drawings to ensure compliance with specification and guidelines.
• Responsible for on-site technical & engineering matters and quality checks.
• Conduct joint inspections with RTO.
• Ensure M&E works are performed on time and in compliance with all necessary standards, code of practice and safety regulation.
• Manage M&E sub-contractors work progress, drawings, materials, samples, method statements submission and approval.
• Supervise M&E works and coordinate with Client’s representative, consultants and sub-contractors on technical matters.

Requirements :

• Diploma in Mechanical or Electrical
• M&E Coordinator Certificate
• Minimum 3 years of relevant experience
• Good communication and interpersonal skills

Job Responsibilities

1. Oversee the planning, analysis, recommendations in support of project (engineering, procurement & construction).
2. Control the overall project budget and attend all the project meeting with clients.
3. Construction activities may be related to new facilities or modification to existing sites.
4. Assist in developing and implementing construction policies that support project construction.
5. Responsible to site progress according to schedule set.
6. Project planning and management, Project co-ordination, supervision and monitoring the progress of site works.
7. Interface and coordinate with Engineering supporting construction activities.
8. Reviews and client interface liaison and project management team liaison.
9. Prepare periodic management reports.
10. Ensure timely requisition of resources (e.g., labour, materials, equipment etc.).
11. Ensure works progress according to the establish schedule, and main contractor’s master installation, schedule, and where deviations arise, initiate the appropriate actions.
12. Assist project Manager in the administration of contract, claim, variation, and any dispute arise.
13. Assist Department Manager to monitor accounts receivable of project.
14. Able to work in a standalone environment with Good knowledge with local and international code requirements like API, ASME, AWS.
15. Good knowledge about the piping installation, testing & commission (Hydrotest & Pigging).
16. Work method statement, Lifting Plan, Confined space plan, WAH rescue plan preparation and approval with clients.
17. Lead the rescue drills ( Confined space / WAH).

Job Requirements

• Min Degree in Mechanical Engineering (with 10+ Years Experience) / Diploma in Mechanical Engineering (with 15+ Years Experience)
• Well verse Knowledge on quality management.
• Experience in Maintenance, Shutdown, New construction projects related to Piping & Tankage Works
• 10 year experience in EPCM, EPCC sector. Proven track records of successful project completion on time and on budget or exceeding expectations will be well regards.
• Capable to work with Design / Drafting tools whenever required.
• Demonstrated leadership experience and skills to manage large or multiple construction project and Willing to handle multi projects at various site.
• Able to lead and work independently.

Key software & Design Skills Requirements

• AutoCAD
• Pipe E3D
• Solid works & Creo
• Microsoft Package software’s
• Cswip 3.1 added value

We regret that only shortlisted candidates will be notified.