Job Descriptions

• Review, update and coordinate all architectural work including shop drawings for the project.
• Liaise, supervise and coordinate with sub-contractors and vendors on projects and work.
• Ensure compliance with Architectural specifications and achieve quality aspect of architectural works.
• Coordinate with architect, structural engineer and M&E engineer to resolve construction problems and issues.
• Carry out architectural works scheduling, material requisition, cost control, project supervision and documentation.
• To attend to construction site coordination works and meeting.
• Review project specifications, tender clarifications and construction drawings
• Carry out daily supervision and coordination of all architectural implementations at site.
• Prepare any necessary construction method statement and technical proposal to ensure smooth transition of works.
• Assist the Project Management team in ensuring that the works are carried out to schedule and in accordance with relevant regulations.
• Coordinate all architectural drawings and works, submit and update status of shop drawings and materials as well as supervise work progress.
• Performs other duties as assigned.

Requirements

• Degree/ Diploma in Architecture or its equivalent
• Minimum 3 years and above of relevant site experience in building projects
• Ability to interpret construction drawings for any discrepancies.
• Familiar with local standard quality implementation, BCA CONQUAS and other Quality Mark Assessment
• Candidate who possesses good experience and exposure will be considered higher position. Salary will be commeasured according to skill

The work scope for the above job title is as but not limited to the following:

1 The main task of the Driver is to drive the Company’s heavy vehicles to and from the different work sites as required by the work schedule. The heavy vehicles include lorry crane and tipper truck.

The Driver must drive the vehicles to the required work sites punctually.

The Driver must follow the schedule obtained from the Site/ Store Supervisors and Co-ordinator. The Driver must inform the parties involved if there are any clashes in schedule before proceeding.

The Driver must inform the Site/ Store Supervisors and Co-ordinator as soon as possible if he is delayed in his schedule. This will enable them to plan their resources efficiently.

2 Usage of Company vehicles

The Driver is to switch off the ignition completely and remove the key when the vehicle is parked and not in use. The Driver must not leave the vehicle in idle mode while waiting.

The Driver must understand that the Company’s vehicles and attached cash cards are solely to be for Company use. If the Driver uses the cash cards for personal use ie lunch parking fee, the Driver must reimburse the Company.

3 Safety

The Driver must drive and operate the vehicles in a safe manner in accordance to local laws.

If there are loads on the vehicles, the Driver must ensure the loads are properly secured in accordance with local laws and regulations.

The Driver must inform the Project Director immediately he is involved in an accident while driving or operating the vehicle. This includes causing damage to third party property.

The Driver should understand that if the accident is caused by the Driver’s negligence, the Company is entitled to pursue part or all of the claims from him.

The Driver should also understand if he incurs any traffic offences due to his own negligence, the Company is entitled to pursue part or all of the claims from him.

4 Servicing and Maintenance

The Driver is to inform the Company if any of the vehicles are unsafe to operate and require repairs. The Driver must not operate the vehicles in such situation.

The Driver will drive the vehicle to the Company appointed workshop for servicing and maintenance. The Driver will also pick up the vehicle when servicing and maintenance is completed.

The Driver will drive the vehicles to Inspection Centres as required.

Requirements:

• Class 3 Singapore Driving licence.

• Willing and able to do a lot of night jobs or do night shift as well as day shift. Night shift could be for more than 3 months at a time depending on project.

• Saturday is full day and able to work on Sundays when required.

• 2-3 year experience driving tipper truck with good track record

A Design Project Manager in Singapore is responsible for overseeing and coordinating design projects from initiation through to completion, ensuring that design processes meet client requirements, timelines, budgets, and quality standards. This role often involves managing teams of designers, architects, engineers, and other specialists while working closely with clients and stakeholders.

Here are the key duties and responsibilities of a Design Project Manager in Singapore:

1. Project Planning and Strategy:

• Define project scope: Collaborate with clients and stakeholders to understand and define the project’s objectives, deliverables, and key performance indicators (KPIs).
• Create project timelines: Develop detailed project plans with timelines, milestones, and deadlines.
• Set budgets: Establish project budgets, including resource allocation for design teams, equipment, and materials.
• Manage scope changes: Handle any changes to the project scope and update project plans and budgets accordingly.

2. Team Leadership and Coordination:

• Lead design teams: Manage and supervise multidisciplinary design teams, including architects, designers, engineers, and other professionals.
• Delegate tasks: Assign responsibilities to team members and ensure that they have the resources and guidance needed to meet project goals.
• Monitor progress: Track the progress of design deliverables to ensure timelines and quality standards are met.

3. Client and Stakeholder Communication:

• Client liaison: Maintain regular communication with clients to understand their needs, gather feedback, and ensure the design aligns with client expectations.
• Present designs: Present design concepts, updates, and progress to clients and stakeholders through meetings, reports, and presentations.
• Manage expectations: Ensure that clients' expectations are properly managed and met, addressing any concerns or issues promptly.

4. Design Oversight:

• Design coordination: Oversee the design development process, ensuring the quality and consistency of the design work across all stages of the project.
• Ensure design feasibility: Ensure that the proposed designs are feasible within the given budget, timeline, and technical constraints.
• Maintain design standards: Ensure that designs adhere to relevant industry standards, codes, and regulations in Singapore.
• Approve design changes: Evaluate and approve design modifications, ensuring that they align with the overall project objectives.

5. Budget and Resource Management:

• Resource allocation: Allocate resources (design staff, tools, software, etc.) efficiently to meet project needs.
• Budget management: Track and manage the design budget, ensuring that resources are utilized efficiently without exceeding financial limits.
• Cost optimization: Identify opportunities for cost-saving without compromising the design quality and functionality.

6. Risk Management:

• Identify risks: Identify potential risks associated with the design phase, including delays, cost overruns, or technical challenges.
• Mitigation plans: Develop and implement risk mitigation strategies to minimize the impact of identified risks.
• Problem resolution: Resolve issues related to design, scheduling, or budgeting that may arise during the project lifecycle.

7. Quality Assurance and Control:

• Monitor design quality: Ensure that design outputs meet the required quality standards, as defined by the client, regulations, and industry best practices.
• Conduct reviews: Organize regular design reviews to assess progress, identify any quality issues, and make necessary adjustments.
• Implement feedback: Incorporate feedback from clients, stakeholders, and the project team to improve the design process and outcomes.

8. Contract and Vendor Management:

• Manage contractors: Work with contractors, vendors, and third-party service providers to ensure design requirements are met.
• Negotiate contracts: Oversee the negotiation and management of contracts with suppliers and vendors involved in the design process.
• Vendor coordination: Ensure that external partners, such as consultants or material suppliers, meet the design specifications and project schedules.

9. Compliance and Legal Requirements:

• Adhere to regulations: Ensure that all design processes and outputs comply with Singapore’s legal, environmental, and building regulations.
• Obtain necessary approvals: Ensure that all design documents, plans, and approvals are in line with regulatory requirements and are submitted to the appropriate authorities.

10. Project Reporting and Documentation:

• Progress reporting: Provide regular progress reports to senior management and clients, including updates on design, timelines, and budgets.
• Documentation: Ensure all design documentation is accurately maintained and archived for future reference.
• Post-project review: Conduct post-project evaluations to assess the design process and identify areas for improvement for future projects.

Skills and Qualifications:

• Design Expertise: Strong knowledge of design principles, architecture, and industry-specific design software (AutoCAD, SketchUp, Adobe Creative Suite, etc.).
• Project Management Skills: Ability to manage multiple projects simultaneously, with experience using project management tools (e.g., Microsoft Project, Trello, Jira).
• Leadership and Teamwork: Ability to lead and inspire design teams, and work collaboratively with stakeholders, clients, and contractors.
• Communication Skills: Strong verbal and written communication skills to present design concepts and ideas effectively.
• Problem-Solving Abilities: Ability to solve complex design and project-related issues efficiently.
• Budget Management: Experience in managing budgets, cost estimating, and financial reporting.

Responsibilities:

• Oversee site works and activities, and provide overall leadership to the project teams
• Handle project planning, scheduling, monitoring and updating to meet project completion targets
• Provide guidance to team in project works in terms of quality and safety standards
• Attending all meetings with clients, consultants and subcontractors
• Any other related duties that may be assigned

Requirements:

• Diploma / Bachelor’s Degree in Architecture / Building / Construction Management, Quantity Surveying or equivalent
• At least 5 year(s) of project management or site management experience in A&A projects
• Independent, diligent, meticulous and highly motivated with excellent team spirit.
• Proficient in use of project management software and tools
• Able to start work in short notice

Job Responsibilities :

• Collaborate with architects, engineers, and consultants to ensure the integration of design elements across disciplines
• Review and coordinate architectural plans, drawings and specifications to maintain design intent and accuracy
• Assist in the planning, scheduling, and management of architectural projects
• Monitor project progress, ensuring timelines and budgets are adhered to
• Prepare, review, and manage architectural documentation, including design proposals, tender packages and construction documents

Job Requirements :

• Diploma or Degree in Building/Architecture or other related field
• Minimum 3–5 years of experience in architectural design, project coordination, or related roles
• Proficient in architectural software such as AutoCAD, Revit, SketchUp, and BIM tools
• Strong understanding of construction techniques, building codes and standards
• Good technical detailing , specification knowledge and aesthetic sensibilities
• Problem-solving mindset with attention to detail
• Proactive, self-motivated and adaptable to dynamic project requirements
  

Administrative Assistant

working days, 9.00am – 6.00pm

Location: Near Tai Seng MRT/ MacPherson MRT

Roles & Responsibilities:

• Handle all administrative duties relating to HR matters and claims.
• Coordinate and assist HR Manager in day-to-day general administration matters.
• Perform basic data entry tasks.
• Any Ad-hoc duties as assigned.

Job Requirements:

• Min a GCE N/O levels , ITE, Diploma or equivalent.
• 1-2 years’ experience in an administrative and support role including Account.
• Proficient in Microsoft Office (Word & Excel).
• Candidates with construction and account background would be advantageous.
• Positive attitude, team player, committed and responsible.
• Billingual in English and Mandarin to liaise with variouos associates

Job Description

• Handling full spectrum of HR duties;

• Manage all recruitment process, on-boarding activities, training and performance appraisal;

• Responsible for HR administration e.g: employees leave records, employees information, HR letters, medical claim;

• To process employees work pass applications, renewals and cancellation;

• Monthly payroll computation and reports;

• Handle all work passes related matters

• Any other HR and administrative duties as and when assigned.

• Working Location: Ubi / Tai Seng

• Working Hours: 5 working days, Mon – Friday (9 am – 6 pm).

Requirements

• Minimum 2 years of experience as a HR generalist in a construction company and/or hands on experience related to HR (Recruitment, Payroll, Benefits Administration, Account,etc)

• Min GCE O Level / Diploma holder

• Familiar of MOM rules and regulations is a must

• Proficient in Microsoft Excel and Microsoft Word

• Assists in foreign worker management pertaining to payroll administration, work permit renewal and cancellation, workers’ home leave administration and other areas of support.
• Accurate processing of payroll for foreign workers.
• Timely renewal and cancellation of work permits for foreign workers.
• Effective support in foreign worker management.
• Carries out work permit applications, renewals and cancellations of foreign workers in a timely manner;
• Follows up with purchase or cancellation of workers’ bond guarantees;
• Co-ordinates with site staff on workers’ work permit matters;
• Follows through on home leave application of foreign workers and seeks the necessary approvals;  Purchases air tickets for workers;
• Maintains and updates workers records in HRMS, HR folder and personal files;
• Handles on-boarding of foreign workers including offer letter preparation and conduct of orientation training;
• Carries out prompt update of staff and worker daily movement report;
• Performs monthly payroll computation of foreign workers including normal pay, allowances, overtime pay, salary advances and deductions for workers; inputs data entry into payroll system and other records;
• Checks through and reconciles errors to ensure the accuracy of working hours, etc, before payroll processing;
• Prepares payroll and costing reports; disseminates cost charging information to respective projects; keys in cost allocation in payroll system;
• Handles back-charging of costs between entities;
• Administers MYE application and related matters;
• Assists in workers’ sick leave and medical claims matters including verification of bills, follow up with hospitals on charges, etc;
• Follows up promptly on government application of foreign worker levy waiver;
• Carries out periodic checking of workers’ passport expiry dates;
• Follows up on foreign worker performance appraisals and updates accordingly;
• Handles worker dormitory matters;
• Follows up on manpower request from project sites through paperwork follow up (manpower requisition form);
• Handles subcontractor billing and back-charging of costs such as workers’ uniforms;
• Handles foreign worker and sub-contractor queries in a timely and effective manner;
• Other duties such as reconciliation of credit card bills by matching the invoices with the receipts before forwarding to Accounts Department;
• Performs any other duties as assigned.

• Assists the contract manager in providing effective support to project management teams by ensuring that the contracts are administered in accordance with contractual obligations and effective cost management strategies;
• Carries out pre-tender activities in the award of trade packages by conducting site show round and ensuring the completeness of tender drawings/documents;
• Seeks clarifications with the respective consultants regarding discrepancies in the scope of work and drawings; replace all addendum drawings and BQ pages after clarifications;
• Seeks quotation from the respective trades and follows up on submission of quotations;
• Takes up quantity as per BQ and the detailed breakdown in the Excel sheet;
• Reviews tender pricing with contract manager; understands the project schedule, profit margin and goodwill discount; attends tender interviews; goes through tender reply with contract manager and prepares reply accordingly;
• Reviews letter of appointments, contract drawings and documents and to highlight any deviation from the tender;
• Attends project kick off meetings and brief the scope of works with project team and management;
• Makes arrangements for insurance/factory licence/bond/pre-construction survey, fit out deposit if required;
• Follows up on making arrangements for sample submission;
• Attends consultant meeting with Project Manager;
• Negotiates with the respective supplier and appoints the specialist sub-contractors based on trade;
• Ensures the timely submission of VO cost on day to day or weekly basis and communicates with the project manager; timely submission of monthly progress claims; final account closing;
• Submits the progress claim on monthly basis;
• Follows up effectively on payment certificate and payment with the clients;
• Certifies sub-contractors claims based on site progress and quantity;
• Requests for AI/EI with the respective consultants;
• Attends internal and external project closure meetings with consultants;
• Submits the warranty based on contractual terms;
• Ensures PM’s submission of as built drawings and OM manual;
• Follows through with the landlord on refund of fit out deposit;
• Any other duties as may be assigned

• Assists in planning, organizing and carrying out project management activities to ensure that assigned projects are executed in a smooth and effective manner to achieve and exceed the cost, quality, timelines and customer satisfaction objectives;
• Assists to ensure that safety procedures are incorporated in all project management activities and takes initiatives to promote a safety working culture;
• Understands contract documentation in conjunction with B.Q. and material specifications;
• Assists in planning for site mobilization and work sequential execution;
• Assists in preparing works schedules and master programs;
• Assists in monitoring project cost budgets and ensuring that desired profit margins are achieved through cost containment, material wastage control, etc;
• Assists in ensuring project performance through close supervision, site checks, close monitoring of site progress and swift resolution of any quality and work schedule issues;
• Assists in ensuring that shop drawings are completed and submissions to the authorities are carried out in a timely manner with Drafting Department;
• Assists in conducting daily meetings with project team members and ensuring that latest changes are communicated to all project staff;
• Attends project kick-off meetings, ongoing meetings and project closure meetings with clients, consultants and other parties;
• Assists in conducting Mass Tool Box meeting with Safety personnel;
• Assists in tracking project performance closely to ensure that projects perform according to agreed schedule, quality and costs;
• Assists in ensuring effective compliance of contractual terms and the full and final settlement of project accounts;
• Assists in updating project development performance in monthly management meetings;
• Assists in ensuring that risk management is taken into account in all project management activities;
• Liaises with suppliers and sub-contractors on contractual matters;
• Assists in responding to consultants’ and requests from others in a pro-active and timely manner;
• Assists in the supervision and motivation of project team members and in promoting teamwork;
• Assists in the deployment of resources and maintenance of duty rosters;
• Liaises with relevant stakeholders effectively to execute the projects in a seamless manner and mitigates any issues that arise;
• Assists in ensuring the execution of projects in accordance with established procedures;
• Assists in ensuring that progress and other reports are prepared in a timely manner as required;
• Assists in project documentation including email communication;
• Assists in verifying sub-contractor claims and material orders with Quantity Surveyors;
• Any other duties as may be assigned.

• Assists Project Manager in the co-ordination of project management activities to ensure that projects are executed in a smooth and effective manner;
• Attends external project kick-off meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting;
• Assists Project Manager in carrying out all shop drawings and submission with Drafting Department;
• Assists Project Manager in carrying out risk assessment and other risk management activities; makes recommendations on risk control measures; communicating risk assessment to all workers;
• Ensures all contractors are safety inducted and issued with Permit before work commencement;
• Ensures the adherence to the safe work procedure (SWP) established; to inform project manager or project director of any shortcoming in the SWP or risk control measures implemented;
• Ensures the familiarization with the scope of works;
• Resolves site problems proactively in a timely manner and seeks advice from Project Manager as appropriate;
• Ensures the timely preparation of project progress and other reports;
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation;
• Co-ordinates daily activities of workers’ duties and to ensure that they are performed in a proper manner;
• Makes daily checks on work progress, housekeeping and safety implementation on site with safety personnel;
• Assists in cost control by cutting materials wastage, reducing labour cost, usage of tools and equipment, etc;
• Assists the Project Manager in conducting Mass Tool Box meeting with safety personnel;
• Ensures proper project documentation including email communication;
• Assists in promoting good team morale and team spirit in the project team;
• Strong in Structural work

• Process workmen compensation insurance & claims.

• Assist in implementation of the organization’s SHMS.

• Coordinate EHS promotional activities within the organisation.

• Participates as a risk management team member in the corporate RM organization.

• Briefs safety manager team periodically on the execution status of the overall safety program.

• Assist in conduct of monthly corporate WSH committee meetings.

• Take minutes of all meetings and maintain proper records.

• Submit EHS related documentations (internal and external)

• Maintain all relevant RHS records.

• Any other duties as may be assigned.

Operate and promote safe working on site, assign dayly work on construction site. Scheduling, co-ordinaating and supervising the work of all site operatives, ensuring that all work is delivered safely on time and within budget along with managing equipment and materials required. Order and manage hired . internal equipment on a dayly basis, co-ordinate delivery / pick up of material as required.

• Supervise, organize and plan activities to ensure smooth fabrication and construction of structures within the stipulated schedule
• Prepare and plan project progress reports ahead of activities to be completed
• Redline markup drawings to be done progressively and update engineering
• Review technical drawings and advise engineering of any discrepancies before commencing any fabrication works
• Perform MTO and update progressively to ensure proper control of material procurement and usage
• Ensure that manpower is effectively deployed to deliver the products timely
• Follow up on all fabrication and installation job fit up, welding and inspection
• Understand and ensure compliance in project requirement and scope of work
• Manage and ensure subcontractor performance in line with provided schedule
• Resolve any technical problems or issues faced at the work site
• Attend the daily tool box meeting and convey instructions clearly

• Plan, organize and carried out project management activities to ensure that assigned projects are executed in a smooth and effective manner to achieve and exceed the cost, quality, timelines and customer satisfaction objectives;
• Ensure that safety procedures are incorporated in all project management activities and takes initiatives to promote a safety working culture;
• Review contract documentation in conjunction with B.Q. and material specifications;
• Manage the profit and loss of the project;
• Plan for site mobilization and work sequential execution;
• Prepare works schedules and master programs; Ensures that progress and other reports are put up in a timely manner as required;
• Monitor project cost budgets and ensures that desired profit margins are achieved through cost containment, material wastage control, etc;
• Ensure project performance through close supervision, site checks, close monitoring of site progress and swift resolution of any quality and work schedule issues;
• Ensure that shop drawings are completed and submissions to the authorities are carried out in a timely manner with Drafting Department;
• Attend/Chair project kick-off meetings, daily meetings and project closure meetings with clients, consultants and other parties;
• Update and summarizes all project development performance in monthly management meetings;
• Liaise with suppliers and sub-contractors on contractual matters;
• Ensures timely response to consultants’ and all other requests in a pro-active and timely manner;
• Provides effective leadership to team members through coaching, mentoring and motivating on an ongoing basis and ensuring that good team work and esprit-de-corps exist in the Project team;
• Ensures that all project documentation are maintained effectively including email communication;
• Sets key performance indicators for project team members, tracking, monitoring and assessing their performance on an ongoing basis;
• Any other duties as may be assigned.

• Understand the project brief from designers/clients
• Developed designs and concepts based on the client's corporate identify
• Prepare construction, joinery and details drawings
• Preparespecifications for Furniture, Finishes and Equipment's
• Technical Drawing (AutoCAD): Space Planning & Construction Drawing
• At least 2 years of experience in Commercial Design

• Organising and managing project teams, including hiring contractors as needed to complete specific tasks
• Ensuring that all costs are withi budget and working with team members to identify opportunities for cost savings
• Communicating with clients throughout the project to ensure they are satisfied with progress and updates
• Developing and implementing project timelines, ensuring that deadlines are met and that tasks are completed on time
• Evaluating project risks and making recommendations for mitigration of identified risks
• Managing the day-to-day operations of projects to ensure theya re completed on time and within budget
• Communicating with architects, engineers, contractors, subcontractors, suppliers and othe rparties involved in the project
• Ensuring that all project documentation is completed according to copany standards and laws

• Experience and skilled carpentry on residential and commercial projects
• Able to read and understand detailed drawings
• Able to independently fabricate and install carpentry works on and off job sites
• Able to use tools, machines,electric saw
• Able to work on night/weekend/holiday for commercial projects
• Able to follow safety rules and regulations
• Able to keep and maintain clean and hygiene on and off job sites

Our client is from Construction Industry. They are looking for a WSH Manager to assist their Finance team for the next phrase of their business. They are located at North of Singapore– easily accessible. The WSH Manager is responsible for:

Duties

• Responsible for developing, maintaining, and implementing the EHS Management System.
• Ensure compliance with legal requirements and conduct regular inspections and audits to uphold safety standards.
• Managing contractors, investigating incidents, and enforcing corrective actions.
• Review risk assessments, promote a strong EHS culture, and manage the fire protection system and emergency response team.
• Liaises with statutory bodies, provides training to employees, and ensures continual updates to management on EHS performance.
• Collaborate with third-party security providers and drive the continuous improvement of the plant's EHS system.

Requirements

• Min Diploma in Relevant Qualification in Workplace, Safety and Health
• Min 8 years relevant working experience in Construction Engineering Industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115141 (Tan Su Yee)

Working hours: 3 rotating shift work (3 rest day every 2 weeks)

Location: CBD

Entitled to Performance bonus + AWS

Responsibilities

• Perform daily operational activities which includes attending to customer's enquiries, needs and complaints.
• Perform preventive and breakdown techinical support and maintenance for mechanical/electrical services, plumbing & sanitary services, Aircon servicing and maintenance, ACMV systems, chillers and electrical control. - Perform electrical related work for all Low and High voltage systems, and preventive & breakdown technical support.
• Inspect and maintain site electrical equipment.

Requirements

• Candidate must possess Licensed Electrical Worker (LEW) Certified Grade 7.
• Recognized techincal certificate in Mechanical & Electrical, Building Services, Facility Technology or its equivalent.
• Candidates with WSQ qualifications are welcome to apply.
• Possess hands on and technical knowledge with minimum 3 years' experience in Facilities Management.
• Able to perform shift work

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

We regret to inform that only shortlisted candidates would be notified

We wish you all the best in your career search.

You are welcome to visit our website at www.rdtpsg.com

RD Trusted Partners Pte Ltd| EA License No.: 24C2352

Devon Yang Yue Teng | EA Personnel No.: R24123723

Responsibilities:

• Full spectrum of HR functions including recruitment and orientation, training, payroll and IR8A submission, work pass and Man Year Entitlement application, dormitory arrangement, incident reporting, medical, insurance and work injury claims, employee profiles and leave management, overseas deployment, promotions and resignations.
• Coordinate with Operations Department in project executions, including fulfilling manpower requirements, site registrations, inductions, swab test registration.
• Assist in apply certifications & grants/internships/Career fairs/ Company events.
• Perform asset, inventory and financial reconciliation with Finance & generate monthly reports
• Use payroll software/ERP to complete daily tasks and assist in improvements of the systems.
• Maintain historical records for annual accounting and ISO audits.

Requirements:

• Diploma and above with proficient in Microsoft Office tools.
• Experience with MOM EPOL/WPOL, HR and/or payroll software

Interested applicants, send in your updated resume by clicking “Apply Now”

Michelle Koh

EA License No.: 23C1894

EA Personnel No.: R1656105

• Perform duties as the role of Project Manager under WSH Act
• Management of all demolition sites as allocated by the Company
• To work with the project team on the management of projects
• Well versed in paperwork
• Planning and scheduling work
• Ensure projects are completed timely and to good quality
• Attend meetings whenever require
• Coordinate and liaise site activities
• Such relevant work as and when delegated by the Directors

Minimum 02-05 years experience in Curtain Wall Erection

No formal education is required

Willing to work after regular hours

Management may ask practical test before confirm the job

First three month will be probation period after evaluation will offer the permanent position to our member of staff.

Job Description

• Prepare Soft Clay Weekly disposal forecast
• Prepare Monthly Soil disposal record
• Prepare weekend activity and duty roster update for LTA/QPS
• Prepare Manpower record
• Monthly disposal forecast update for LTA
• RC contractor daily attendance sheet and report to LTA
• Recording attendance sheets of daily coordination meetings (Daily)
• Monthly staging ground coordinating meeting
• Secant Bore Pile & King Post Inspection

Requirements:

• Candidate must possess at least a Degree in Civil/Structural /Environmental Engineering recognised by the Professional Engineer Board, Singapore
• Minimum 1 year of working experience in the construction industry. Fresh graduates are welcome to apply
• Effective communication skills, both verbal and written, with the ability to liaise confidently with clients and stakeholders.

Job Responsibilities :

• Formulate and develop Company’s safety policy and procedures
• Assist and enforce sites to implement site health and safety plans
• Perform health and safety audits on sites
• Conduct periodic health and safety training for site personnel
• Maintain Company's health and safety statistics and records
• Liaise with Government Agencies on health and safety issues, application of factory permit and other safety statutory requirements for compliance by sites
• Investigate all accidents which occur and recommend appropriate health & safety measures to prevent their occurrence
• Assist Senior Project Manager / Project Manager on all site safety matters
• Ensure the Occupational Health Safety management programme are effectively implemented and maintained
• Conduct and plan safety training awareness programme

Job Requirements :

• Diploma / Degree in Occupational Health and Safety, Engineering or a related field
• Minimum 5 years relevant working experience in construction industry
• Possess a valid registration with MOM as Workplace Safety and Health Officer (WSHO)
• Independent with good communication skills
• Possess ECO Certificate (NEA)
• Familiar with Government Regulations relating to Occupational Safety, Health and Environmental
• Certificate in WSQ Specialist Diploma in Workplace Safety & Health level C
• HDB Experience required
• 6 days work week from 8.00am to 5.00pm