Job Description

• Handle full set of accouts
• Inventory system maintenance
• Prepare monthly inventory reconciliations, bank reconsiliations, and intercompnay confirmations
• Prepare AR aging report and sales reports
• Handle tax compliance matters, including tax computation and GST reporting
• Liaises with external auditors and tax agents
• Maintain accounting controls by preparing and recommending policies and procedures
• Other ad-hoc assignments as assigned

Requirements

• Candidate must possess at least a Diploma, Advanced/Higher Diploma, Bachelor's Degree in Fiance/Accountancy/Banking or equivalent
• At least 2-3 years of working experience in the related fields is required
• An independent team player, with a proactive personality
• Strong excel and database skill
• Knowledge in AutoCount accounting system will be advantageous
• Candidates with audit working experience are preferred

Job Purpose

Responsible in warehouse daily operation duties of coordination and ensure all requirement document is in place and compliance to rule & regulations.

Duties and Responsibilities

• Ops Exec and Ops Exec Assistant assist the Marine Logistics Manager in the day to day operations and their functions including:-
• Sea staff engagement and deployment on/off vessels.
• Assess and identify sea staff of good potentials and make recommendations for their specific deployment and promotions.
• Briefing Sea staff prior to their joining vessels with regards to SEMS matters as required, Charterers’ requirement, and any unique nature of the trade and Port requirements.
• Brief Sea staff prior to their joining vessel with regards to the operational aspects of the vessel and charterer’s requirements.
• Control and monitor vessels daily activities.
• Control and monitor budgets relevant to Operations Department.
• Maintain, control and monitor Company SEMS, Port and Charterers requirements, in conjunction with QHSSE Dept.
• Arrange and deploy Sea Staff for in-house training and external approved short courses training.
• Carry out annual Vessel Operation Inspection Audits as assigned by Manager in conjunction with the DPA.
• A member of the shore Emergency Response Team for the relevant vessels they are in charge of.
• As one of the incident investigators, if so appointed by Marine Logistics Manager or as required by the Designated Person Ashore,
• Carry out necessary formalities and documentary requirements with Flag State, Port Authorities, Immigration and Customs for sea staff signing on/off vessels.
• Maintain and update an efficient filing system for the Operations Department.
• Sourcing and appointment of agency with approval from the Marine Logistics Manager.
• Contacting ex-seafarer for redeployment.
• Sourcing for new seafarer and arranging for interview of senior officers with the respective department heads.
• Checking seafarer’s certificates, including arrangement for medical check-up as per Charterer’s requirement.
• Checking of seafarer’s certificate authenticity with the relevant authority and application for Flag State licence.
• Maintaining up-to-date seafarer’s personnel file and monitoring seafarer’s certificates and documents expiry.
• Updating crew planning/rotation list and crew list.
• Ensuring crew appraisal assessment is being conducted, signed and filed.
• Extension of crew’s entry pass and ship’s landing pass with Singapore Immigration authority.
• Declaration of immigration clearances and outward port clearance.
• Update of crew article, including sign on/off via MPA Marinet.

Qualifications and Requirements

• At least Diploma in Logistics Supply Chain Management or Business Studies
• Expertise: 3-5 yrs working experience in Marine lubricant logistics supply operations
• Knowledge: Port operation and shipping & transport coordination
• Skill: Excel worksheet , Planning, scheduling and Marine deliveries to vessels

Working Conditions

• 5.25 Working days per week but may be subject to O/T and working during weekends and holidays.
• Could expect to work in stuffy, noisy and dusty environment.
• May need to travel out of Singapore occasionally.
• Mandatory wearing of appropriate PPE when on duty.

1. Experience in maintaing full set of accounts (general ledger / accounts receivable / accounts payable)

2. Billing to customers (monitor payment)

3. Payment to suppliers (monitot payment)

4. Perform monthly bank reconciliation

5. Maintain inventories records

6. Maintain fixed asset register

7. Perform payroll

8. Filing of company's annual return / income tax / GST

9. Arranging for statutory audit (if required)

10. Familiar with accounting software such as MYOB, Quickbooks, Sun system and MIM

Location: Jurong West

Salary: $4000-$5500

Manufacturing industry

Have AWS & bonus

Job Description

• Contract preparation, review and negotiation support
• Review contracts for sales, construction, purchasing/procurement, or EPC (engineering, procurement and construction) and other commercial matters. Direct participation in negotiation may be requested depending on situations.
• Tasks include support for seeking approval from headquarters on essential deals, by providing certain explanation on the matters
• Update existing standard contracts, systems and procedures, provides training and guidance to internal clients.
• Dispute resolution support
• Support business teams to solve emerging and actual claims and disputes, litigations and arbitration.
• Policy making and corporate governance support
• Draft, update and arrange policies of regional entities, and liaise and coordinate necessary documentation with General Manager of Legal and with the headquarters to fulfil its corporate governance requirements.
• Training preparation and hosting
• Manage the corporate secretarial matters such as annual general meeting and board meeting of affiliate entities within the region.

Requirement

• At least 4 years relevant working experience
• Willing to travel

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

We are seeking a passionate Senior Quality Assurance Executive/ Assistant Quality Assurance Manager for our brands—Neo Garden Catering / Deli Hub Catering — as part of our department expansion! You will be responsible for ensuring all hygiene and food safety standards at the assigned locations.

• Lead and conduct daily on-site inspections, ensuring compliance with quality standards, food safety regulations, and operational procedures across production and retail outlets.
• Supervise and conduct personal hygiene checks, product quality assessments, and sample retention protocols to ensure adherence to internal and external standards.
• Develop, implement, and oversee the laboratory testing and sampling schedules, ensuring all critical tests are conducted in accordance with product specifications and regulatory requirements.
• Analyze test results and recommend corrective actions for any deviations or non-conformities.
• Implementation and continuous improvement of the ISO 22000:2018 Food Safety Management System (FSMS) for relevant operations.
• Oversee and updates of the Quality Management System and Standard of Procedure, ensuring alignment with industry best practices and regulatory changes.
• Work closely with relevant departments to ensure operational adherence to standards, and address any discrepancies or audit findings.
• Ensure the accuracy, completeness, and proper retention of all quality assurance records, documents, and files as per regulatory and company policies.
• Perform regular audits of quality documentation and lead the improvement of record-keeping practices.
• Serve as the primary point of contact for external auditors and internal audits.
• Coordinate with departments to ensure compliance with quality standards during audits and external inspections.
• Develop, review, and enhance Standard Operating Procedures (SOPs) across all areas of operations to ensure best practices in quality assurance and food safety.
• Development and continuous improvement of food safety training materials, ensuring they are relevant, up-to-date, and aligned with company policies and industry standards.
• Identify and mitigate quality risks, ensuring proactive measures are taken to prevent non-conformities and quality failures.
• Communicate quality-related issues and improvements to stakeholders, ensuring alignment across all levels of the organization.

Requirements

• A level, Diploma or equivalent, in Food Science/ Technology/ any related standard
• Possess knowledge in SFA regulation, ISO 22000, Halal/ any other related standard
• Able to multitask and work within timeline
• Good communication skills
• Team player, proactive and meticulous in work
• Open to working in the West and on weekends

The level of appointment offered will commensurate with candidate's experience.

Interested applicants are invited to apply with your detailed resume via the “Apply Now” option.

We thank you for your interest and regret that only shortlisted candidates will be notified.

Job Description & Requirements

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection.

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

.Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

• 5 days, Boon Lay, Transport (2 ways)
• $3500 - $4000 (basic), completion bonus
• 1yr contract, staff benefits entitlement
• Start immediately or within short notice

Responsibilities:

• Administer employee benefits program including insurance plan/welfare program and company events
• Administer manage specific modules for SAP-SF HRIS (leave)
• Assist with business traveling arrangement and coordination while adhering to business travel policy.
• Coordinate Executive events and functions.
• General administration duties and ad hoc duties as required.

Requirements:

• Possess higher Nitec/Diploma in HR, Business or Office skills
• **Able to work in a fast-paced environment
• **Must have experience in arranging overseas business trips
• Minimum 1 year of relevant experience
• Good communication and interpersonal skills, planning and organising
• Ability to work independently and as part of a team.
• Meticulous and conscientious.
• Proactive individual with good planning & organizational skills
• Proficient in MS Office Suite

Interested applicants, please send your resume to [email protected]

About the role

We are seeking a Temporary Executive (Academic Affairs) to join the National Institute of Early Childhood Development (NIEC) in the West Region on a 7-month contract to cover a maternity leave. In this role, you play a key part in supporting the implementation of academic governance policies and examination-related processes, and providing secretariat support for NIEC Board of Examiners (BOE) meetings.

What you'll be doing

• Issue electronic copy of academic collaterals, print and issue physical copies to NIEC graduates
• Implement academic governance policies and examination-related processes, monitor and rectify any gaps or inconsistencies
• Provide secretariat support for NIEC BOE meetings
• Generate, analyse and exchange data with internal and external stakeholders for planning, reporting and sharing purposes

What we're looking for

• A Bachelor’s degree in any discipline
• Preferably with relevant work experience in Registrar’s Office or Academic Affairs Office
• Strong communication and interpersonal skills with the ability to liaise effectively with diverse stakeholders
• Excellent organisational and project management skills with the ability to prioritise and multitask
• IT savvy and proficient in Microsoft Word, Powerpoint and Excel
• High attention to detail, strong analytical, critical thinking and problem-solving skills

Accounts cum Admin Executive

Salary : $3,000 - $3,800

Working hour : Mon to Fri 8am to 6pm

Location : Bukit Batok

Job Description:

* Manage full-spectrum accounting tasks, including accounts payable (AP), accounts receivable (AR), invoice issuance, payment tracking, and GST compliance.

* Reconcile financial records, prepare monthly financial reports, and assist with budgets and cash flow statements.

* Oversee office administration, including procurement, document filing, and coordination with external vendors.

* Process customer orders, coordinate service schedules, and address service-related issues with clients and the operations team.

* Support management by preparing reports, scheduling meetings, and handling correspondence.

* Provide backup support for administrative staff and respond to inquiries related to accounting, administration, or customer orders.

Requirements:

* Bachelor’s degree in Accounting, Finance, or related field.

* Proven experience in an Accounts or similar role.

* Familiarity with Singapore’s tax submission.

* Excellent organizational and problem-solving skills.

* Attention to detail and ability to resolve discrepancies effectively.

Company Name: Nala Employment Pte Ltd | License No.: 16C8302
Contact Person: Soo Yee Hui
Regisration No.: R24120810

• 5 days, Jurong, Transport provided (to & fro)
• $3800 - $4000 basic, fixed allowance
• Able to start within short notice
• 1yr contract (with completion bonus)

Responsibilities:

• Administer employee benefits program including insurance plan/welfare program and company events
• Administer manage specific modules for SAP-SF HRIS (leave)
• Assist with business traveling arrangement and coordination while adhering to business travel policy.
• Coordinate Executive events and functions.
• General administration duties and ad hoc duties as required.

Requirements:

• Possess higher Nitec/Diploma in HR, Business or Office skills
• Minimum 1 to 2 years of relevant experience
• Must have experience in arranging overseas business trips
• Good communication and interpersonal skills, planning and organising
• Ability to work independently and as part of a team.
• Meticulous and conscientious.
• Proactive individual with good planning & organizational skills
• Proficient in MS Office Suite

Interested applicants, please send your resume to [email protected]

Responsibilities:

• Ideate, prioritize, and define requirements based on market and customer insights.
• Analyze trends, assess technology, and generate product concepts.
• Define competitive positioning and USP.
• Execute NPD plan within timelines, aligning Scrum teams via Agile.
• Source manufacturers, liaise with formulators, and ensure regulatory compliance.
• Conduct efficacy, safety, and stability tests with manufacturers.
• Finalize product specs, labels, and packaging with relevant teams.
• Research pricing, create costing data, and present to management.
• Provide technical support to Marketing and conduct product training.
• Monitor industry trends, competitor actions, and product performance.
• Manage product improvements and corrective actions with manufacturers.
• Ensure compliance with standards and support company goals with additional projects.

Requirements:

• Degree in Nutrition/ Chemistry/Pharmacy or equivalents.
• Minimum 1 year of experience in product development or management within dietary supplements or health food.
• Proficient in product/project management, with strong planning and time management skills.
• Resourceful, analytical, and effective at problem-solving.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• Attend to customer inquiries, quotations, and taking of orders from the customers. Involved in the coordination works for fulfilling the customer's order requirements.
• Develop strong customer relationships through regular visits or timely responses to their queries
• Understand customer's requirements, provide advice and assistance to customers with regard to technical issues
• Responsible for hunting new customers and growth areas
• A self-motivated, result-oriented individual, passionate about sourcing new business clients
• Understand our ideal customers and how they relate to our products.
• Able to work independently, strong initiative as well as a team player
• You will be given a monthly sales target. This target will be revised as and when the Company deems fit.
• Collate and submit sales reports and analysis
• Minimum 2 years of working experience in a Sales role. Relevant experience in Marine Industry is an added advantage
• Possess Class 3 driving license and own a car are preferred.
• Bilingual in English and Mandarin, verbal and written (to liaise with Mandarin-speaking associates and customers)
• GCE A Level, Diploma, and/or above in Sales or any other discipline relevant to the marine industry
• Proficient in IT Skills e.g. MS Office
• Other ad hoc duties as assigned by management
• Knowledge in SAP system is preferred
• Able to start work immediately.

Basic Salary: S$2600 to S$4500 + Allowance

Job Responsibilities:

• Picking and Packing of small items like beauty product

• Taping of box for e-commerce fulfilment

• Any other ad-hoc duties

Job Requirement:

• Independent and flexible in taking on new task.

• Fit and able to lift product cartons

• Flexi Working hours

• Training will be provided

Job Highlights

• Exciting and Friendly Environment

• Flexible Hours

• Expanding Company

Interested applicants please email [email protected] or whatsapp 86927749 with your resume.

• 5 days, Jurong, Transport provided (to & fro)
• $3800 - $4000 basic, fixed allowance
• Able to start within short notice
• 1yr contract (with completion bonus)

Responsibilities:

• Administer employee benefits program including insurance plan/welfare program and company events
• Administer manage specific modules for SAP-SF HRIS (leave)
• Assist with business traveling arrangement and coordination while adhering to business travel policy.
• Coordinate Executive events and functions.
• General administration duties and ad hoc duties as required.

Requirements:

• Possess higher Nitec/Diploma in HR, Business or Office skills
• Minimum 1 to 2 years of relevant experience
• Must have experience in arranging overseas business trips
• Good communication and interpersonal skills, planning and organising
• Ability to work independently and as part of a team.
• Meticulous and conscientious.
• Proactive individual with good planning & organizational skills
• Proficient in MS Office Suite

Interested applicants, please send your resume to [email protected]

• 5 days, Jurong, Transport provided (to & fro)
• $3800 - $4000 basic, fixed allowance
• Able to start within short notice
• 1yr contract (with completion bonus)

Responsibilities:

• Administer employee benefits program including insurance plan/welfare program and company events
• Administer manage specific modules for SAP-SF HRIS (leave)
• Assist with business traveling arrangement and coordination while adhering to business travel policy.
• Coordinate Executive events and functions.
• General administration duties and ad hoc duties as required.

Requirements:

• Possess higher Nitec/Diploma in HR, Business or Office skills
• Minimum 1 to 2 years of relevant experience
• Must have experience in arranging overseas business trips
• Good communication and interpersonal skills, planning and organising
• Ability to work independently and as part of a team.
• Meticulous and conscientious.
• Proactive individual with good planning & organizational skills
• Proficient in MS Office Suite

Interested applicants, please send your resume to [email protected]

Responsibilities:

• Assist Project Manager with project functions, including project management, site management, and risk control to achieve project goals.
• Support Project Manager in planning and coordinating construction works according to the master and detailed work programs.
• Guide junior Engineers in daily work execution.
• Prepare and submit project documents such as schedules, method statements, design plans, risk assessments, and reports.
• Supervise construction to ensure compliance with contract specifications, drawings, quality standards, and ESH practices.
• Coordinate and liaise with clients, authorities, consultants, subcontractors, and suppliers on all project matters.
• Facilitate site inspections, submit technical reports, and maintain records. Assist in verifying progress payments and contractor claims.
• Attend regular meetings with clients, consultants, and contractors to monitor project progress.
• Establish and maintain a document control system for design drawings and project documents.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 3 years of working experience in construction and infrastructure industry (LTA, Roadwaorks, MRT Projects).

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• 5 days, Jurong, Transport provided (to & fro)
• $3800 - $4000 basic, fixed allowance
• Able to start within short notice
• 1yr contract (with completion bonus)

Responsibilities:

• Administer employee benefits program including insurance plan/welfare program and company events
• Administer manage specific modules for SAP-SF HRIS (leave)
• Assist with business traveling arrangement and coordination while adhering to business travel policy.
• Coordinate Executive events and functions.
• General administration duties and ad hoc duties as required.

Requirements:

• Possess higher Nitec/Diploma in HR, Business or Office skills
• Minimum 1 to 2 years of relevant experience
• Must have experience in arranging overseas business trips
• Good communication and interpersonal skills, planning and organising
• Ability to work independently and as part of a team.
• Meticulous and conscientious.
• Proactive individual with good planning & organizational skills
• Proficient in MS Office Suite

Interested applicants, please send your resume to [email protected]

We are seeking a passionate Senior QA Executive in Food Safety for our brands—CaterCo, Lavish, and Penang Culture—as part of our department expansion! You will be responsible for ensuring all hygiene and food safety standards at the assigned locations.

Responsibilities

• Lead and conduct daily on-site inspections, ensuring compliance with quality standards, food safety regulations, and operational procedures across production and retail outlets.
• Conduct personal hygiene checks, product quality assessments, and sample retention protocols to ensure adherence to internal and external standards.
• Develop, implement, and oversee the laboratory testing and sampling schedules, ensuring all critical tests are conducted in accordance with product specifications and regulatory requirements.
• Analyze test results and recommend corrective actions for any deviations or non-conformities.
• Implementation and continuous improvement of the ISO 22000:2018 Food Safety Management System (FSMS) across all relevant operations.
• Oversee and updates of the Quality Management System and SOPs, ensuring alignment with industry best practices and regulatory changes.
• Work closely with relevant departments to ensure operational adherence to standards, and address any discrepancies.
• Ensure the accuracy, completeness, and proper retention of all quality assurance records, documents, and files as per regulatory and company policies.
• Coordinate with departments to ensure full compliance with quality standards during audits and external inspections.
• Development and continuous improvement of food safety training materials, ensuring they are relevant, up-to-date, and aligned with company policies and industry standards.
• Identify and mitigate quality risks, ensuring proactive measures are taken to prevent non-conformities and quality failures.
• Communicate quality-related issues and improvements to stakeholders, ensuring alignment across all levels of the organization.
• Any other ad-hoc projects assigned by superior.

Requirements

• A level, Diploma or equivalent, in Food Science/ Technology/ any related standard
• Possess knowledge in SFA regulation, ISO 22000, Halal/ any other related standard
• Able to multitask and work within timeline
• Good communication skills
• Team player, proactive and meticulous in work
• Open to working in the West and on weekends

The level of appointment offered will commensurate with candidate's experience.

Interested applicants are invited to apply with your detailed resume via the “Apply Now” option.

We thank you for your interest and regret that only shortlisted candidates will be notified.