Responsibilities:

• Organise and conduct regular credit & AR review meetings with BUs / sales departments to close out all delinquent accounts.
• Follow up and communicate with customers.
• Review and process new customer account applications.
• Maintain and update particulars and credit limits of customer accounts in SAP.
• Monitor daily sales transactions for credit holds in SAP and communicate with sales department to address overdue issues.
• Disseminate or circulate invoices, statements of accounts, reminder and confirmation letters.
• Perform customer account reconciliations and confirmations.
• Prepare regular collections and AR status reports for management and for HQ.
• Liaise with insurer and apply for trade credit insurance for customer accounts with credit terms.
• Liaise with banks in respect of bank guarantees including but not limited to letters of credit.
• Act as key AR and billing liaison person for overseas shared service centre.
• Check supporting documents to carry out billings to customers.

Requirements:

• Min 1 year relevant working experience.
• Proficient in MS software including Outlook, Word, Excel and Powerpoint.
• Working experience with Letters of Credit is desired
• SAP working experience is preferred
• Communicate with customers and insurer tactfully and professionally.
• Prioritize issues, have sense of urgency and ownership of tasks.
• Comfortable working closely with different departments and shared service centre simultaneously.

Please forward your resume in *MS Words Format* to Mr Lex Ong Shee Hean (R1106602) : [email protected]

(NOTE: The following information should be Included in the Resume. Thank you)

1. Date of Availability
2. Detailed Job Scope
3. Reason for Leaving for All Employments
4. Salary Expectation

Shortlisted candidates will be notified for an Interview.

Visit our website for more positions: http://strategysolutions.com.sg

MOM License: 09C3018

Job Responsibilities and Duties

• Perform Environmental Control Officer duties in Construction site
• Conduct regular inspection to ensure earth control measure/ noise control are in place
• Liaise with relevant authorities like MOM, PUB and NEA
• Liaise with in-house consultant
• Familiar with local law and regulations

Requirements (Qualification & Experience)

• Must be a registered Environmental Control Officer with NEA
• Willing to work in West region of Singapore
• Minimum 3 years of relevant working experience in a construction firm

We are looking for an experienced pest control technician who possesses good communication skills in written and spoken English and is able to work independently and provide pest control solutions.

The Job Scope Consists of the following:-

1. To handle the daily schedule of the technician

2. Handling technician, training and supervision them on the job

3. Must have driving license

4. Must possess a Pest Control Technician License

5. Minium 1 year experience

Monitoring flight timings and aircraft type on various information systems

-

CCTV monitoring and noting down timings of various activities on the aircraft parking stand

-

Keeping records of various activities that have taken place on MS docs (e.g. Excel, Word etc)

-

Respond to system alerts and notify other stakeholders to provide follow ups

Qualification :

GCE N or O levels,

Purpose: To create, control and manage changes to customer's Technical Product Data (TPD) packages (Items, Bill of Materials, Product specification documents) in the Product Lifecycle Management (PLM) and Enterprise Resource Planning (ERP) systems. To deploy TPD changes to the relevant Persons-in-Charge (PICs) for execution.

Key Area of Responsibilities:

• Check the correctness and completeness of product packages, such as Technical Product Data (TPD) and Bill of Materials (BOM) received from customers.
• Work with the user of TPDs to define the new TPD requirement and update the ISO document (for new customers or any change in TPD requirement).
• Maintain required customer items, BOM, and TPDs in PLM and ERP systems.
• Create and control the item part number, BOM and TPD in the PLM and ERP systems.
• Create projects in the ERP system for the fulfillment of customer Sales orders.
• Implement Engineering Change Order (ECOs) and deploy the changes to the next inline PIC (such as planner, purchaser, process engineer and Sales & Program dept.)
• Check and ensure all required information for the TPD (items, BOMs, documents) and/or configuration change are provided, and approved by the customer.
• Support and participate in company continuous improvement program.

Qualification & Experiences:

• Diploma/Degree in Mechanical Engineering/Science or relevant field.
• Minimum 2 years of working as a product data engineer in the semiconductor industry or similar position.
• Proficient in Microsoft Excel functions
• Good communication skills

Responsibilities:

• Perform quality control checks and generate QC/Halal reports for incoming and outgoing products to ensure that they meet quality and safety standards in accordance to SFA and MUIS regulations

• Perform sensory evaluation for incoming raw materials to ensure consistent quality and for product improvement

• Conduct quality control and Halal inspection for customer feedback

• Provide technical and quality related assistance to other departments, assist in marketing department’s recipe, videos and photo shoot when required

• Perform regular internal and external product quality control and monitor their quality so as to provide timely feedback to category/supplier for improvement

• Compile/archive QC/Halal report related documents

• Assist to maintain, source and purchase QC equipment and consumables when required

• Assist in product development or product improvement sensory evaluation preparations when required

• Assist sales or other departments with product specification, certification and quality related document requests

• Assist to liase with Halal/FSSC/ISO Authority on inspection and renewal of Related Certification.

• Assist on planning and executing Audit schedules

Requirements:

• Minimum Diploma in Food Science, Food Technology or related disciplines

• At least 2 years of relevant working experience in the food industry QC/R&D environment and familiar with ISO/FSSC 22,000 and Halal certifications

• Possess good interpersonal skills, self-motivated & methodical

Independent & a team player

• Proficient in Microsoft Office (Word, Excel & PowerPoint)

• Possess basic cooking skills

Job Description

• Industry/ Organization Type: Manufacturing/Production
• Position Title: Instrumentation and Control Engineer
• Working Location: Islandwide
• Working Hours: Monday – Friday, 9.00am – 6.00pm
• Salary Package: Up to $4200 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Develop solutions for complex technical issues in sectors including life sciences, power, water treatment, chemical, petrochemical, shipyard, and oil and gas.
• Perform calibration of various measuring instruments such as pressure, temperature, flow, radar level, analyzers, and wireless devices; collect and record data accurately.
• Calculate calibration metrics including range, mA, frequency, required output, and accuracy, documenting the results.
• Analyze and compile technical and statistical information to create detailed reports.
• Maintain accurate and up-to-date engineering documentation.
• Any other task as assigned by the Superior.

APPLY NOW!!!

• Diploma or Degree in Electrical, Electronic, or Instrumentation Engineering.
• At least 3 years of relevant experience in a similar field.
• Possess valid Class 3 driver's license.
• Knowledge of Mechanical and Measuring Instruments.
• Excellent reading, writing, and verbal communication skills.
• Skilled in technical report writing and able to interpret schematic diagrams.
• Willing to work at various locations island-wide.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71604 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Duties and Responsibilities of Document Control cum Admin Assistant

1) Assist Engineer in coordinating all document control activities.

2) Control of Design Project files and customer database.

3) Perform tracking, printing, archiving and distribution of documents.

4) Liaise with each department on the calibration of measuring tools.

5) Update and compilation of Engineering data.

6) Establish and maintain organized paper and electronic filing systems according to office procedures to ensure the expeditious retrieval of information

GENERAL ADMIN

1) Scan office materials, locate and compile information and format reports, graphs, tables, records, and other sources of information

2) Operate and coordinate servicing of office equipment such as copier, fax machine, scanners, etc

3) Coordinate and assist with planning of office activities, teleconferences, meetings and to coordinate events, receptions, workshops, conferences and high-level committee/board meetings as requested

4) Purchase and manage office stationery and pantry inventory

5) Prepare travel expense reimbursements, invoices and journal entries

6) Coordinate travel arrangements and itineraries

7) Provide general administrative support including but not limited to: phones, distributing mail, and preparing expense reports.

8) Maintain the security of confidential information

Education Qualification:

Minimum Diploma

Experience / Skill Required

- 1-3 years experience in Document Control in LTA projects / Civil Engineering / Construction Company

- Good interpersonal and communication skills and able to interact with people of all levels

- Must be able to work on alternate half day Saturdays

- Able to start work within 2 weeks after job offer will have an added advantage

Other Requirements:

1) Must be willing to learn

2) Good team player

Full Time

Minimum Qualification Level

GCE 'N' Level

Monthly Salary Range (SGD)

$2,500 - $3000

(EAST REGION) - Paya Lebar MRT

- Stable & Well Known construction industry

- Basic + AWS + VB

Responsibilities:

- Managing company’s project performance, from delivering of operational KPI to liaising with internal Project Managers.

- Prepare quarterly reports for review and clearly present the results and status to various stakeholders on a regular basis.

- Key personnel in maintaining, analysing, and forecasting project cost to project team and management.

- Active involvement in budgeting and forecasting processes; administer and review all project forecasts and actual, explain and correct variances on a monthly basis.

- Liaise with external auditors to conduct statutory audit and interim audit.

- Provide insights into project WIP, collections, risks, opportunities and cashflow.

- Actively reviewing and recommending measures for continuous improvement in project management and reporting processes.

- Present updated financial data and actively attends project management meeting to review cost status.

- Review and provide accurate project payment respond and invoices for payment.

-Any ad-hoc duties as and when required.

Requirements:

- From Construction company & experience in handling cost control for project

- Diploma / degree

- Project cost control for Work in Progress (WIP)

- Liaise with PD & PM

HOW TO APPLY:

Interested applicants, please click on “Apply Now”.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Chris Poh Tze Zheng

EA Personnel Reg No: R24120101

Job Descriptions:

* Development & Implementation of Instrumentation & Control, Robotic, Building Automation, Industrial Automation, Process Control Application.

* Electrical Control Design

* Implementation of Process Automation, Instrumentation and Control, Testing and Commissioning, Technical Support, Customer Service, PLC Programming, SCADA / HMI programming, Computer and Server, Industrial Networking

* Responsible for design & development, implementation, onsite testing & commissioning, support, documentation and training

* Ad-hoc engineering support to customer when required.

* Willing to work on fast pace environment.

Job Requirements:

* Relevant graduate degree for Engineering (Electrical, Mechanical, Computing, or Mechatronic)

* Min 1-2 yrs experience in good engineering practice, process automation, robotic, service and maintenance. Fresh graduates are welcome.

* Hands on experience in instrumentation implementation

* Knowledge of Building Automation & Process Control

* Experience in BMS / PLC / HMI process control / automation system, onsite commissioning

* Good technical skills in Allen-Bradley / Siemens PLC programming, SCADA

* Strong problem-solving and analytical skills

* Hardware configuration and software coding

* IT knowledge for Server/Client and Infrastructure

* Electrical control, instrumentations and control knowledge

* Customer orientated

* Analytical thinking

* Good communication skills for both written and spoken

* Ability to work well with others in a team environment, providing input and feedback in a helpful manner.

* Able to interact well with vendors.

* Strong team player with excellent interpersonal and communication skills, ability to work independently, Pro-active and able to work in a fast paced environment and handle multiple tasks when required.

Interested applicant please send resume with expected remuneration to [email protected]

We regret that only shortlisted candidates will be notified.

As a Customer Service Officer, you act as the first point of contact for customers to resolve or escalate issues for resolution. You also perform administrative support to ensure smooth delivery of operations.

Roles and Responsibilities

· Attend to customer enquiries, feedback and complaints via phone, email or in-person.

· Check and monitor CCTVs for discrepancies, system issues and incidents.

· Obtain and evaluate all relevant information to escalate car park cases to the Operations or Technical teams.

· Monitor incident queues and work with operational teams to ensure escalated cases are resolved within the required service levels and customer requirements.

· Perform investigations and process refunds for customers.

· Perform administrative tasks related to customers data such as service reports etc.

· Monitor and track manpower deployment for Operations and Technical teams.

Requirements

· At least GCE ‘O’ Levels or equivalent.

· At least 2 years of working experience in the customer service or call centre roles.

· Required to work rotating shifts due to 24/7 operations of control centre.

· Excellent customer service and communication skills.

Proficient in Microsoft Office tools (Excel and Word).

(EAST REGION) - Paya Lebar MRT

- Stable & Well Known construction industry

- Basic + AWS + VB

Responsibilities:

- Managing company’s project performance, from delivering of operational KPI to liaising with internal Project Managers.

- Prepare quarterly reports for review and clearly present the results and status to various stakeholders on a regular basis.

- Key personnel in maintaining, analysing, and forecasting project cost to project team and management.

- Active involvement in budgeting and forecasting processes; administer and review all project forecasts and actual, explain and correct variances on a monthly basis.

- Liaise with external auditors to conduct statutory audit and interim audit.

- Provide insights into project WIP, collections, risks, opportunities and cashflow.

- Actively reviewing and recommending measures for continuous improvement in project management and reporting processes.

- Present updated financial data and actively attends project management meeting to review cost status.

- Review and provide accurate project payment respond and invoices for payment.

-Any ad-hoc duties as and when required.

Requirements:

- From Construction company & experience in handling cost control for project

- Diploma / degree

- Project cost control for Work in Progress (WIP)

- Liaise with PD & PM

HOW TO APPLY:

Interested applicants, please click on “Apply Now”.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Chris Poh Tze Zheng

EA Personnel Reg No: R24120101

• Preparation of Inspection and Test Plan, Checklist, Procedures and review of construction drawings.
• Material receiving inspection of pipes, fittings, gaskets, valves, flanges, Steel Structure, bolts & nuts in compliance to material list, mill certificates, test reports and correct ,material specification.
• Control of quality for piping and steel stucture fabrication such as fit-up, welding, visual and dimensional inspection conforming to approved for construction drawings.
• Responsible for issuance of Non-Conformance Reports if any violation and out of standard for piping works.
• Conducts quality coordination meeting and initiate corrective and preventive action.
• Inspection of piping spools, steel structure fabrication, installation and testing.
• Preparation of all inspection reports and clearance of dossier at close up.

Requirements

Must possess bachelor degree

Must possess CSWIP 3.1/AWS

Must have Marine shipyard experience

Job Description:

• Responsible for performing Credit Appraisal of Trade Finance Accounts, Retail loans/Syndicated/Bilateral loans.
• Responsible for all Credit administration related function pertaining to trade finance advances, retail loans, Syndicated/ Bilateral loans including
• Post sanction monitoring of corporate and retail credit accounts including verification of sanction notes and related documents before disbursal.
• Maintenance and safe custody of Credit file/ loan documents/ security documents etc.
• Monitoring of the credit portfolios to ensure prompt pre-emptive action so as to maintain quality of assets.
• Analyse financial statement of borrowal accounts for deviation with the sanction proposal.
• Ensure compliance of Loan Grading and provisioning as per MAS/RBI guidelines, whichever is more stringent.
• Monitoring of Early Warning Signal (EWS) and analysis of the alerts received with specific views and the impact on the credit quality of the loan.
• Follow up with the borrower/ Agent for regularisation of irregular loans as well as stressed assets for early resolution.
• Make unit visits as per terms of sanction.
• Follow up for compliance of other terms and conditions as per terms of sanction/Facility Agreement and perfection of security.
• Verification/Authorization financial payment messages and non-financial messages through Finacle.
• Follow-up on roll over notices, interest advice to borrowers and other lenders/participating branches
• Correspondence with borrowers/agents through email or phone calls for their confirmation on payment due or on clarification of various issues relating to different clauses of facility agreement, interest periods, compliance certificate etc.
• Preparation of regulatory returns (MAS, RBI) at stipulated intervals.
• Preparation of various returns and internal reports (including adhoc and miscellaneous reports for top management)
• Attending to Internal and External Audits and ensure rectification of deficiencies pointed out.
• Follow-up for submission of periodic financials and compliance certificates.
• Attending to credit related queries from regulators.
• Work closely with Senior Management to provide views and recommendations on market trends and conditions.

Requirements:

• Degree or equivalent preferably in the field of Banking and finance
• Banking experience of a minimum of 5 years in related field.
• Good understanding of financial statements
• Sound knowledge of banking systems/processes/procedures.
• Good management skills and analytical mindset, one who can effectively analyse a situation and make decisions to address issues/problem.
• Excellent communication and inter personal skills with the ability to Interact with all levels of staff and top management
• Sound knowledge of Microsoft applications: Excel/Word/PowerPoint.

The candidate should preferably have experience in different verticals such as International Banking, Computer Application and Business Management.

Interested candidates please email resume in MS Word format to [email protected]

Please state your last drawn and expected package, relevant skill sets and the position you are applying for.

Kindly attached a photograph of yourself on the resume.

Resumes collected will be kept in strict confidence and used for recruitment purposes only.

Job Description

• Industry/ Organization Type: Marine Technology Service Provider
• Position Title: Administrative Assistant (Inventory control)
• Working Location: West – Tuas (Nearest MRT: Tuas Link) – Requires taking a few bus stops to reach the company
• Working Hours: 5 days (Mon-Fri: 8.30 am-5.30 pm)
• Salary Package: Up to SGD2800 + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Maintain accurate records of inventory levels and ensure the database is up-to-date.
• Regularly review stock levels and usage trends to prevent overstocking or shortages.
• Coordinate with the procurement team to order necessary items before stock runs low.
• Prepare and manage detailed reports on inventory operations, adjustments, and issues for internal use.
• Document and update inventory procedures and policies to enhance workflow efficiency.
• Assist in processing incoming and outgoing orders, ensuring that all transactions are recorded promptly and accurately.
• Schedule and coordinate the delivery of goods, liaising with suppliers and logistics partners.
• Conduct regular checks to ensure the quality and condition of inventory items.
• Report any discrepancies or issues with delivered goods to the relevant parties immediately.
• Work closely with other departments, particularly the finance and operations teams, to align inventory needs with budgetary constraints and operational requirements.
• Provide administrative support during inventory audits and end-of-year stock takes.
• Identify opportunities for improving inventory processes and contribute to the implementation of new systems or technologies that enhance inventory management.

APPLY NOW!!!

• Min. N level
• Min. 1 year of working experience in the related field
• Training is provided to an inexperienced candidate
• Familiar with Microsoft Office

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69068 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Job responsibilities:

• Spray, fog, bait and trap to control pests.
• Control roaches, ants, rodents, birds, termites, etc.
• Inspect property, determine problem and implement the most effective solution.
• Receive work orders and work requests, determine nature of the problem and undertake
• necessary actions.
• Ensure safety of clients and their respective customers while performing duties.
• Operate spraying equipment, bait gun, power fogger and various power and hand tools
• in performance of duties.
• Comply to workplace safety regulation while executing the duties and maintenance of
• the equipment and vehicle
• Perform other related work as instructed by reporting officer

Job Requirements

• Ability to work in a team
• Attention to detail and accuracy
• Communicate well with customers to build strong customer relationship
• Ability to manage time and complete all delegated tasks efficiently
• Excellent knowledge of Singapore road with good driving record
• NEA Technician License ( those with no license and experience may also apply)
• Min NITEC
• Class 3 Driving License (preferred but not a requirement)
• 12 hours rotating shift
• $2,200 - $2,800

Responsibilities:

· Create, control and distribute QA related documents

· Register, track and maintain records of all incoming/outgoing drawings, documents from clients/suppliers

· Project documents/drawing submission thru Aconex

· Plan, implement and organize ISO 9001, 14001, 18001 & Bizsafe audit (Internal & External)

· Maintain proper documentation in accordance to IMS requirements

Requirements:

· Possess Diploma/Degree in Civil Engineering

· Preference with/without experience

· Proficient in MS Office

· Preference will be given to those who with experience

• Ensure all quality control documentation is compiled and completed for as-built handover through the QC turnover engineer
• Review and prepare reports on Authority inspections (RI inspection, BCA TOP inspection, etc)
• Establish Project Quality System, implement and maintain in accordance with Singapore standards application to BCA for CONQUAS Assessment and provide a framework to achieve the score
• Assess the implementation of the Quality Plan and Quality Control Plans on site
• Ensure the project QA/QC plan follows specifications and contract requirements
• Compete for site quality control instructions and action remedial responses
• Coordinate quality inspections with all the site subcontractors and vendors and coordinate all non-destructive testing on site
• Distribute relevant QA/QC documentation to site subcontractors
• Verify the quality-related site activities are in accordance with the applicable codes and standards
• Participate in the site's internal and external site audits
• Coordinate all the quality site inspections through the site QC inspectors
• Control all nonconformance reports and undertake remedial action
• Must have fluent English communication skills to liaise with the Client’s staff
• Have Main Contractor Experience

Roles & Responsibilities

Responsible for carrying out daily pest control activities according to operational schedule

Monitors and responds to customers’ feedback

Provides oral and written feedback on work activities

Uses equipment, chemicals, and pesticide/insecticide products

Performs any other related duties as instructed by the immediate superior.

Requirements

Must possess an NEA Vector Control License & Singapore Class 3 driving license

Physical fit to carry out the works.

Candidates with no experience are welcome to apply

• Assessment and management of risks on the business and processes.
• Monitor compliance with group procedures, local policies, and relevant laws/regulation.
• Conduct internal control reviews for stores, back office, events and on ad-hoc topics.
• Conduct monthly reviews and analysis on sensitive and high-risk transactions.
• Follow up on audit/internal control recommendations to ensure resolution of relevant risks and findings.
• Conduct testing and complete internal control self-assessment checklists.
• Participates in stock takes and ensure controls on inventory management are well respected.
• Partner with relevant departments and stakeholders to implement, change, or improve processes.
• Conduct trainings/briefings and provide support to stores and office teams on controls and compliance matters.
• Works closely with regional team on internal control initiatives.

Elsa Fontanne (CEI No. R24124496)

Recruitment Consultant

Contact Number: 67860100

Email Address: [email protected]

Recruit Express Pte Ltd / EA Licence No: 99C4599

We regret only shortlisted candidates will be contacted

As a Senior Industry 4.0 (I4.0) Analyst at Micron Technology, Inc., you will report to the Smart Manufacturing and Artificial Intelligence organization. The team defines, drives and delivers end to end smart manufacturing solution, integrated across functions of the business. The team will investigate applying industry-leading the best methodologies in automation, AI and machine learning to enhance Micron’s product development, business, and administrative processes across the company.

Responsibilities and Tasks

• Lead the analysist for complex business problems and issues using data from internal and external sources to provide insight to decision-makers. Identifies and interprets trends and patterns in datasets to locate influences.
• Constructs forecasts, recommendations and strategic/tactical plans based on business data and market knowledge.
• Creates specifications for reports and analysis based on business needs and required or available data elements.
• May provide consultation to users and lead cross-functional teams to address business issues.
• May directly produce datasets and reports for analysis using system reporting tools
• Understands business problem and translates user requirements into technical language and vice versa for data science / technical solution / IT teams.
• I4.0 Analyst with strong domain knowledge is preferred and will bridge the gap between users and developer team
• Accountable to ensure modules / functionalities address current metrics gaps and new business opportunity
• Translating project expected project metrics gain into dollar values, partnering with Finance
• Defining priority for projects for strategic pillar roadmap provided by Strategy Pillar Leader
• Conduct diagnostic and understand gaps and areas of improvement in current IIoT solutions and ways of working
• Work with PDE, Data Scientist, System Architect and IIoT end users to design & define requirements and analyze information, production interdiction that related to the adoption of IIoT for Smart Manufacturing
• Ensure optimization and standardization of tools and processes leveraging central team business partners to allow I4.0 solutions to be scaled sustainably across Micron Backend sites
• Develop business case, including impact validation approach, ROI of potential solutions and prioritize & propose projects for implementation
• Lead projects and activities that will require the coordination, support, and management of resources from global teams
• Provide expert functional and process guidance on system interfaces and capabilities

Qualifications

• Master/Bachelor's Degree in Electrical Engineering, Specialized in Data Analytic.
• At least 5-7 years of work experience in Assembly & Test and Post Wafer Fab (PwF) Process & Equipment Engineering or similar operations functions, good knowledge in High Bandwidth Memory (HBM) production is preferred
• Familiar with Composite Metro solution development, systems and solutions for high volume and high mix production environment
• Good interpersonal skills with demonstrable ability to effectively lead and present to small and large groups
• Proven ability to work multi-functionally with peers, senior and mid-level management
• Peer leadership and relationship management skills
• Strong analytical and problem-solving skills
• Highly organized and ability to remain flexible to the changing business needs

About Micron
As the leader in innovative memory solutions, Micron is helping the world make sense of data by delivering technology that is transforming how the world uses information. Through our global brands — Micron, Crucial and Ballistix — we offer the industry’s broadest portfolio. We are the only company manufacturing today’s major memory and storage technologies: DRAM, NAND, NOR and High Bandwidth Memory. Our solutions are purpose built to demonstrate the value of data to unlock financial insights, accelerate scientific breakthroughs and enhance communication around the world.We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status

Analyzes complex business problems and issues using data from internal and external sources to provide insight to decision-makers. Identifies and interprets trends and patterns in datasets to locate influences. Constructs forecasts, recommendations and strategic/tactical plans based on business data and market knowledge. Creates specifications for reports and analysis based on business needs and required or available data elements. May provide consultation to users and lead cross-functional teams to address business issues. May directly produce datasets and reports for analysis using system reporting tools.

• Work closely with the project manager and administer the design control system and programming to meet budget and timeline expectations of the project.
• Responsible of modifying controls, designs, and other documents in accordance with processes and standards and in line with industry standards as per the customer's URS.
• Assist and participate in internal the purchase, FAT and SAT, test and debug, controls and validation operations.

Requirements:

• Diploma in engineering or equivalent
• At least 3 years of relevant work experience in control systems design.
• Knowledgeable in Allen Bradley and Siemens-S7 programming

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

• Work closely with the project manager and administer the design control system and programming to meet budget and timeline expectations of the project.
• Responsible of modifying controls, designs, and other documents in accordance with processes and standards and in line with industry standards as per the customer's URS.
• Assist and participate in internal the purchase, FAT and SAT, test and debug, controls and validation operations.

Requirements:

• Diploma in engineering or equivalent
• At least 3 years of relevant work experience in control systems design.
• Knowledgeable in Allen Bradley and Siemens-S7 programming

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

Responsibilities:

• To operate CNC milling and turning (3 axis & 5 axis)
• Able to scheduling machined parts to customers in time
• General duties

Requirements:

• Minimum Diploma in Mechanical Engineering or Degree in Mechanical Engineering
• At least 5 years of working experience
• Ability to multi-task and possessed initiative
• Able to start work immediately

Friendly working environment

Company Details:

SUPERFIX (SINGAPORE) PTE LTD

5, Yishun Industrial Street 1,

North Spring Bizhub, #07-08,

Singapore 768161

Tel: 6748 2122

Fax: 6747 9838

Interested applicants, please email your resume to [email protected]

• Work closely with the project manager and administer the design control system and programming to meet budget and timeline expectations of the project.
• Responsible of modifying controls, designs, and other documents in accordance with processes and standards and in line with industry standards as per the customer's URS.
• Assist and participate in internal the purchase, FAT and SAT, test and debug, controls and validation operations.

Requirements:

• Diploma in engineering or equivalent
• At least 3 years of relevant work experience in control systems design.
• Knowledgeable in Allen Bradley and Siemens-S7 programming

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303