We are seeking for part time/ adhoc pest control technician to join our team!

Working days: adhoc

Job Scope:

• Perform pest control treatments and inspections at clients' premises such as F&B and residentials.

• Provide relevant advice to clients during inspection

• Provide service report

• Maintain pest control equipment in good working condition.

Requirements

• Pest Technician licence
• personal transport
• experience working in Pest company

Interested candidates may watsapp to 82336017.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

We are a North Indian Restaurant located at Tanjong Katong Road, Singapore. We have a vacancy for a Quality Control Supervisor for Food Services.

You should be conversant with North Indian Cuisine; both tandoori and curries. We specialize in traditional recipes and styles of cooking. You should be aware of 'Bhapa’ (steaming), ‘Bhunao’, ‘Dum’, ‘Talna’ (frying), ‘Sambaar’ (tampering), ‘Sekhna’ (pan roasting) techniques of cooking in order to conduct quality checks.

You should also be conversant with traditional beverages like Shikanji, Kaanji, Lassi, in order to ensure quality.

Your job scope will be:

• Manage and Conduct quality checks for Restaurant Service and Food Delivery.
• Manage and Conduct quality checks for BBQ and Catering Services.
• You will be reporting to the Restaurant Manager.
• You will be responsible to maintain top quality standards in the restaurant and hygiene to achieve an A rating from SFA and follow all safety standards.

We work six days a week, split shit (two-hour afternoon break) and forty-four hours a week. Subject to your consent, you will be expected to work on Public Holidays. Monday is an off-day and weekends are busy workdays.

Accommodation, transport and meals shall be at your cost.

Your appointment contract will be as per MOM rules and guidelines.

We are hiring Quality Control Specialist to be outsourced to our clients from reputable healthcare organizations.

Apply now!

Job Scope

• Project management: analytical, raw material and microbiological method introduction and analytical equipment qualification
• Assist in regulatory filing and method launch
• Helping out in invalid results tracking, trending and investigation
• Conducting unexpected results investigation
• Control trend establishment and investigations
• Reference standard and reagent qualifications
• Conducting compendia review
• Assisting in audit preparation and involvement and other tasks as assigned.

Job Requirements

• A minimum experience of 3-5 years in Pharmaceutical, Biopharmaceutical or related manufacturing environment.
• Six Sigma Greenbelt training would be helpful.
• Demonstrated experience e.g. in the area of method validation, method transfer, method verification.
• Demonstrated ability to collaborate with cross functional or cross sites to achieve objectives.

All Interested candidates are invited to email your resume in MS Word format to:

[email protected]

Please include your full working experience, education background, notice period, expected salary.

Sheryl Tan
Outsourcing Team
Recruit Express Pte Ltd
Company Reg. No. 199601303W | EA License Number: 99C4599

We regret to inform that only suitable candidates will be shortlisted for an interview.

Job Description

• Industry/ Organization Type: Manufacturing/Production
• Position Title: Instrumentation and Control Engineer
• Working Location: Islandwide
• Working Hours: Monday – Friday, 9.00am – 6.00pm
• Salary Package: Up to $4200 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Develop solutions for complex technical issues in sectors including life sciences, power, water treatment, chemical, petrochemical, shipyard, and oil and gas.
• Perform calibration of various measuring instruments such as pressure, temperature, flow, radar level, analyzers, and wireless devices; collect and record data accurately.
• Calculate calibration metrics including range, mA, frequency, required output, and accuracy, documenting the results.
• Analyze and compile technical and statistical information to create detailed reports.
• Maintain accurate and up-to-date engineering documentation.
• Any other task as assigned by the Superior.

APPLY NOW!!!

• Diploma or Degree in Electrical, Electronic, or Instrumentation Engineering.
• At least 3 years of relevant experience in a similar field.
• Possess valid Class 3 driver's license.
• Knowledge of Mechanical and Measuring Instruments.
• Excellent reading, writing, and verbal communication skills.
• Skilled in technical report writing and able to interpret schematic diagrams.
• Willing to work at various locations island-wide.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71604 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

We are seeking for part time pest control technician to join our team!

$1600 to $1800

Contact HR @ 91383851 for an interview!

Working hours: 9am to 1pm

Working days: 5 days

Job Scope:

• Fogging / Misting
• Pest Management
• Client relations
• Prepare service reports

Contact HR @ 91383851 for an interview!

Need to know Zeiss CMM Program

Need to Know Zeiss CMM Operation

Have Quality Assuarnce & Quality Control Knowledge

Know incoming / In-process / External provider parts insepection

Know prepare of quality documentation and maintenance documents like daliy Monitoring Data and Monthly Data performance

Will preapare of documentation for customer audit and ISO audit

As a Senior Industry 4.0 (I4.0) Analyst at Micron Technology, Inc., you will report to the Smart Manufacturing and Artificial Intelligence organization. The team defines, drives and delivers end to end smart manufacturing solution, integrated across functions of the business. The team will investigate applying industry-leading the best methodologies in automation, AI and machine learning to enhance Micron’s product development, business, and administrative processes across the company.

Responsibilities and Tasks

• Lead the analysist for complex business problems and issues using data from internal and external sources to provide insight to decision-makers. Identifies and interprets trends and patterns in datasets to locate influences.
• Constructs forecasts, recommendations and strategic/tactical plans based on business data and market knowledge.
• Creates specifications for reports and analysis based on business needs and required or available data elements.
• May provide consultation to users and lead cross-functional teams to address business issues.
• May directly produce datasets and reports for analysis using system reporting tools
• Understands business problem and translates user requirements into technical language and vice versa for data science / technical solution / IT teams.
• I4.0 Analyst with strong domain knowledge is preferred and will bridge the gap between users and developer team
• Accountable to ensure modules / functionalities address current metrics gaps and new business opportunity
• Translating project expected project metrics gain into dollar values, partnering with Finance
• Defining priority for projects for strategic pillar roadmap provided by Strategy Pillar Leader
• Conduct diagnostic and understand gaps and areas of improvement in current IIoT solutions and ways of working
• Work with PDE, Data Scientist, System Architect and IIoT end users to design & define requirements and analyze information, production interdiction that related to the adoption of IIoT for Smart Manufacturing
• Ensure optimization and standardization of tools and processes leveraging central team business partners to allow I4.0 solutions to be scaled sustainably across Micron Backend sites
• Develop business case, including impact validation approach, ROI of potential solutions and prioritize & propose projects for implementation
• Lead projects and activities that will require the coordination, support, and management of resources from global teams
• Provide expert functional and process guidance on system interfaces and capabilities

Qualifications

• Master/Bachelor's Degree in Electrical Engineering, Specialized in Data Analytic.
• At least 5-7 years of work experience in Assembly & Test and Post Wafer Fab (PwF) Process & Equipment Engineering or similar operations functions, good knowledge in High Bandwidth Memory (HBM) production is preferred
• Familiar with Composite Metro solution development, systems and solutions for high volume and high mix production environment
• Good interpersonal skills with demonstrable ability to effectively lead and present to small and large groups
• Proven ability to work multi-functionally with peers, senior and mid-level management
• Peer leadership and relationship management skills
• Strong analytical and problem-solving skills
• Highly organized and ability to remain flexible to the changing business needs

About Micron
As the leader in innovative memory solutions, Micron is helping the world make sense of data by delivering technology that is transforming how the world uses information. Through our global brands — Micron, Crucial and Ballistix — we offer the industry’s broadest portfolio. We are the only company manufacturing today’s major memory and storage technologies: DRAM, NAND, NOR and High Bandwidth Memory. Our solutions are purpose built to demonstrate the value of data to unlock financial insights, accelerate scientific breakthroughs and enhance communication around the world.We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status

Analyzes complex business problems and issues using data from internal and external sources to provide insight to decision-makers. Identifies and interprets trends and patterns in datasets to locate influences. Constructs forecasts, recommendations and strategic/tactical plans based on business data and market knowledge. Creates specifications for reports and analysis based on business needs and required or available data elements. May provide consultation to users and lead cross-functional teams to address business issues. May directly produce datasets and reports for analysis using system reporting tools.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description

• Industry/ Organization Type: Marine Technology Service Provider
• Position Title: Administrative Assistant (Inventory control)
• Working Location: West – Tuas (Nearest MRT: Tuas Link) – Requires taking a few bus stops to reach the company
• Working Hours: 5 days (Mon-Fri: 8.30 am-5.30 pm)
• Salary Package: Up to SGD2800 + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Maintain accurate records of inventory levels and ensure the database is up-to-date.
• Regularly review stock levels and usage trends to prevent overstocking or shortages.
• Coordinate with the procurement team to order necessary items before stock runs low.
• Prepare and manage detailed reports on inventory operations, adjustments, and issues for internal use.
• Document and update inventory procedures and policies to enhance workflow efficiency.
• Assist in processing incoming and outgoing orders, ensuring that all transactions are recorded promptly and accurately.
• Schedule and coordinate the delivery of goods, liaising with suppliers and logistics partners.
• Conduct regular checks to ensure the quality and condition of inventory items.
• Report any discrepancies or issues with delivered goods to the relevant parties immediately.
• Work closely with other departments, particularly the finance and operations teams, to align inventory needs with budgetary constraints and operational requirements.
• Provide administrative support during inventory audits and end-of-year stock takes.
• Identify opportunities for improving inventory processes and contribute to the implementation of new systems or technologies that enhance inventory management.

APPLY NOW!!!

• Min. N level
• Min. 1 year of working experience in the related field
• Training is provided to an inexperienced candidate
• Familiar with Microsoft Office

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69068 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

☑ Basic $ 4500 - $ 6000

☑ MNC - High Bonuses & Allowances !!

☑ 5 Days (Mon – Fri: 8.00pm – 5.30pm / 8.30am – 6pm )

☑ East Region – Maincon Builder

Job Description

• Develop and manage project schedules from design to commissioning.
• Estimate durations, resources, and prepare progress reports.
• Handle tender submissions, site planning, and progress monitoring.
• Manage EOT claims and oversee RI/TOP schedules and handovers.

Job Requirements:

• Diploma/Degree in Civil Engineering or related
• Min 3 years of experience in construction planning building-related facilities.
• Proficiency in MS Project Planner, Primavera, or Synchro.

Interested applicants are welcome to apply or send your updated resume to [email protected]

Only shortlisted candidate will be notified

Kam Soo Leng, Yvette

Registration: R22107492

Job responsibilities:

• Spray, fog, bait and trap to control pests.
• Control roaches, ants, rodents, birds, termites, etc.
• Inspect property, determine problem and implement the most effective solution.
• Receive work orders and work requests, determine nature of the problem and undertake
• necessary actions.
• Ensure safety of clients and their respective customers while performing duties.
• Operate spraying equipment, bait gun, power fogger and various power and hand tools
• in performance of duties.
• Comply to workplace safety regulation while executing the duties and maintenance of
• the equipment and vehicle
• Perform other related work as instructed by reporting officer

Job Requirements

• Ability to work in a team
• Attention to detail and accuracy
• Communicate well with customers to build strong customer relationship
• Ability to manage time and complete all delegated tasks efficiently
• Excellent knowledge of Singapore road with good driving record
• NEA Technician License ( those with no license and experience may also apply)
• Min NITEC
• Class 3 Driving License (preferred but not a requirement)
• 12 hours rotating shift
• $2,200 - $2,800

Responsibilities:

· Create, control and distribute QA related documents

· Register, track and maintain records of all incoming/outgoing drawings, documents from clients/suppliers

· Project documents/drawing submission thru Aconex

· Plan, implement and organize ISO 9001, 14001, 18001 & Bizsafe audit (Internal & External)

· Maintain proper documentation in accordance to IMS requirements

Requirements:

· Possess Diploma/Degree in Civil Engineering

· Preference with/without experience

· Proficient in MS Office

· Preference will be given to those who with experience

• Ensure all quality control documentation is compiled and completed for as-built handover through the QC turnover engineer
• Review and prepare reports on Authority inspections (RI inspection, BCA TOP inspection, etc)
• Establish Project Quality System, implement and maintain in accordance with Singapore standards application to BCA for CONQUAS Assessment and provide a framework to achieve the score
• Assess the implementation of the Quality Plan and Quality Control Plans on site
• Ensure the project QA/QC plan follows specifications and contract requirements
• Compete for site quality control instructions and action remedial responses
• Coordinate quality inspections with all the site subcontractors and vendors and coordinate all non-destructive testing on site
• Distribute relevant QA/QC documentation to site subcontractors
• Verify the quality-related site activities are in accordance with the applicable codes and standards
• Participate in the site's internal and external site audits
• Coordinate all the quality site inspections through the site QC inspectors
• Control all nonconformance reports and undertake remedial action
• Must have fluent English communication skills to liaise with the Client’s staff
• Have Main Contractor Experience

Job Description

• Industry/ Organization Type: Manufacturing/Production
• Position Title: Instrumentation and Control Engineer
• Working Location: Islandwide
• Working Hours: Monday – Friday, 9.00am – 6.00pm
• Salary Package: Up to $4200 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Develop solutions for complex technical issues in sectors including life sciences, power, water treatment, chemical, petrochemical, shipyard, and oil and gas.
• Perform calibration of various measuring instruments such as pressure, temperature, flow, radar level, analyzers, and wireless devices; collect and record data accurately.
• Calculate calibration metrics including range, mA, frequency, required output, and accuracy, documenting the results.
• Analyze and compile technical and statistical information to create detailed reports.
• Maintain accurate and up-to-date engineering documentation.
• Any other task as assigned by the Superior.

APPLY NOW!!!

• Diploma or Degree in Electrical, Electronic, or Instrumentation Engineering.
• At least 3 years of relevant experience in a similar field.
• Possess valid Class 3 driver's license.
• Knowledge of Mechanical and Measuring Instruments.
• Excellent reading, writing, and verbal communication skills.
• Skilled in technical report writing and able to interpret schematic diagrams.
• Willing to work at various locations island-wide.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71604 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Duties and Responsibilities of Document Control cum Admin Assistant

1) Assist Engineer in coordinating all document control activities.

2) Control of Design Project files and customer database.

3) Perform tracking, printing, archiving and distribution of documents.

4) Liaise with each department on the calibration of measuring tools.

5) Update and compilation of Engineering data.

6) Establish and maintain organized paper and electronic filing systems according to office procedures to ensure the expeditious retrieval of information

GENERAL ADMIN

1) Scan office materials, locate and compile information and format reports, graphs, tables, records, and other sources of information

2) Operate and coordinate servicing of office equipment such as copier, fax machine, scanners, etc

3) Coordinate and assist with planning of office activities, teleconferences, meetings and to coordinate events, receptions, workshops, conferences and high-level committee/board meetings as requested

4) Purchase and manage office stationery and pantry inventory

5) Prepare travel expense reimbursements, invoices and journal entries

6) Coordinate travel arrangements and itineraries

7) Provide general administrative support including but not limited to: phones, distributing mail, and preparing expense reports.

8) Maintain the security of confidential information

Education Qualification:

Minimum Diploma

Experience / Skill Required

- 1-3 years experience in Document Control in LTA projects / Civil Engineering / Construction Company

- Good interpersonal and communication skills and able to interact with people of all levels

- Must be able to work on alternate half day Saturdays

- Able to start work within 2 weeks after job offer will have an added advantage

Other Requirements:

1) Must be willing to learn

2) Good team player

Full Time

Minimum Qualification Level

GCE 'N' Level

Monthly Salary Range (SGD)

$2,500 - $3000

• Preparation of Inspection and Test Plan, Checklist, Procedures and review of construction drawings.
• Material receiving inspection of pipes, fittings, gaskets, valves, flanges, Steel Structure, bolts & nuts in compliance to material list, mill certificates, test reports and correct ,material specification.
• Control of quality for piping and steel stucture fabrication such as fit-up, welding, visual and dimensional inspection conforming to approved for construction drawings.
• Responsible for issuance of Non-Conformance Reports if any violation and out of standard for piping works.
• Conducts quality coordination meeting and initiate corrective and preventive action.
• Inspection of piping spools, steel structure fabrication, installation and testing.
• Preparation of all inspection reports and clearance of dossier at close up.

Requirements

Must possess bachelor degree

Must possess CSWIP 3.1/AWS

Must have Marine shipyard experience

• Assessment and management of risks on the business and processes.
• Monitor compliance with group procedures, local policies, and relevant laws/regulation.
• Conduct internal control reviews for stores, back office, events and on ad-hoc topics.
• Conduct monthly reviews and analysis on sensitive and high-risk transactions.
• Follow up on audit/internal control recommendations to ensure resolution of relevant risks and findings.
• Conduct testing and complete internal control self-assessment checklists.
• Participates in stock takes and ensure controls on inventory management are well respected.
• Partner with relevant departments and stakeholders to implement, change, or improve processes.
• Conduct trainings/briefings and provide support to stores and office teams on controls and compliance matters.
• Works closely with regional team on internal control initiatives.

Elsa Fontanne (CEI No. R24124496)

Recruitment Consultant

Contact Number: 67860100

Email Address: [email protected]

Recruit Express Pte Ltd / EA Licence No: 99C4599

We regret only shortlisted candidates will be contacted

(EAST REGION) - Paya Lebar MRT

- Stable & Well Known construction industry

- Basic + AWS + VB

Responsibilities:

- Managing company’s project performance, from delivering of operational KPI to liaising with internal Project Managers.

- Prepare quarterly reports for review and clearly present the results and status to various stakeholders on a regular basis.

- Key personnel in maintaining, analysing, and forecasting project cost to project team and management.

- Active involvement in budgeting and forecasting processes; administer and review all project forecasts and actual, explain and correct variances on a monthly basis.

- Liaise with external auditors to conduct statutory audit and interim audit.

- Provide insights into project WIP, collections, risks, opportunities and cashflow.

- Actively reviewing and recommending measures for continuous improvement in project management and reporting processes.

- Present updated financial data and actively attends project management meeting to review cost status.

- Review and provide accurate project payment respond and invoices for payment.

-Any ad-hoc duties as and when required.

Requirements:

- From Construction company & experience in handling cost control for project

- Diploma / degree

- Project cost control for Work in Progress (WIP)

- Liaise with PD & PM

HOW TO APPLY:

Interested applicants, please click on “Apply Now”.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Chris Poh Tze Zheng

EA Personnel Reg No: R24120101

About Us:

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary:

You will be responsible for ensuring wafer products meet quality standards by developing shipment procedures, improving processes, resolving anomalies, and overseeing staff training.

Key Responsibilities :

• Develop and maintain wafer product shipment standards and procedures to ensure alignment with customer quality requirements.
• Improve the quality of wafer product shipments by identifying areas for enhancement and implementing corrective and preventive actions.
• Analyse and address quality control inspection anomalies, promptly resolving customer complaints.
• Conduct process analysis and lead continuous improvement initiatives for semiconductor products to elevate overall product quality.
• Oversee training and certification programs for quality control personnel to ensure strict adherence to quality standards and procedures.

Education Qualification & Essential Experiences:

• Bachelor's degree or higher in Electronics, Materials, Chemical Engineering, or other related engineering or science disciplines
• At least 1 years of relevant work experience.

Personal Attributes:

• May need to travel to Taiwan for a training period lasting 6 to 9 months.
• Excellent coordination and communication skills, with the ability to work independently and manage multiple tasks effectively in a fast-paced environment.
• Able to be reliable and accountable in all tasks and responsibilities.
• Have the drive to achieve goals and complete tasks independently.
• Proficient in effectively conveying information through both written and verbal communication.

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

Roles & Responsibilities

• Implements appropriate control measurements in accordance with QECP Design
• Ensure compliance with the latest environmental regulations
• Coordinate with the Construction Manager and QECP on the ECM Plan
• Proper documentation of all EHS records, certificates, notices and official related EHS correspondence
• Organize HSE promotion and health campaigns
• Assist Safety Officer in planning and directing the HSE functions
• Any other duty required to be performed by ECO

Requirements

• Must be NEA Registered ECO
• Registered ECO with more than 3 years post-registration and relevant practical experience in Civil Engineering Construction works with LTA Projects
• Good knowledge of Government Regulations relating to Occupational Safety, Health and Environmental
• Preferred to have experience in managing OHSAS 18K, ISO 14K, ISO9K

Roles & Responsibilities

• Responsible for carrying out daily pest control activities according to operational schedule
• Monitors and responds to customers’ feedback
• Provides oral and written feedback on work activities
• Uses equipment, chemicals, and pesticide/insecticide products
• Performs any other related duties as instructed by the immediate superior.

Requirements

• Must possess an NEA Vector Control License
• Physical fit to carry out the works.
• Candidates with no experience are welcome to apply

Our client is a European private bank specializing in private wealth management, offering tailored investment solutions and personalized financial services to private individuals.

about the job

• Examine credit requests for various credit products across APAC and Europe ensuring adherence to credit strategies, regulatory frameworks and internal policies.
• Approve, ratify or recommend credit requests within delegated authority balancing risk awareness with potential regulatory and legal implications.
• Stay updated on local credit related regulations and ensure compliance by regularly updating credit manuals and directives.
• Review and approve rectification plans for credit violations ensuring adherence to portfolio covenants and special credit terms.
• Provide training to local credit teams and ensure the implementation of updated directives in alignment with group standards.
• Continuously update knowledge of regional economic, political and financial market developments.

skills and experience required

• Bachelor's degree in Finance/Business or a related field.
• Minimum 10 years of experience in a credit risk role preferably in the private banking sector.
• Strong ability to analyze financial data and assess risks.
• Excellent verbal and written communication skills to present findings and recommendations clearly.

*We regret to inform you that only shortlisted applicants will be notified*

To apply online please use the 'apply' function, alternatively you may contact Reenie at 6697 7943 / [email protected] for a confidential discussion.

EA: 91C2918 | R2198716

• Letter Of Credit / LC
• Shipping Documents
• Trading MNC

Job Scope:

• Prepare import / export shipping documents based on L/C, Certificate of Origin, Customs/Insurance declaration
• Monthly delivery / sales reporting
• Liaison and coordinate with suppliers, customers and forwarding agents to ensure smooth and timely cargo delivery
• Prepare Sales and Purchase contracts
• Provide admin support to the department

Requirements:

• Possess a Degree / GCE O / N Levels
• Possess minimum 2 - 5 years' Shipping Documentation & Letter Of Credit / LC experiences
• Good communications and interpersonal skills
• Proficiency in MS Office (Words, Excel & PowerPoint)

To apply please click on the APPLY NOW button or email your resume with the following details inside your resume for faster processing:

• Reason for leaving each past & current employment
• Salary drawn for each past & current employment
• Expected Salary
• Earliest availability date

We regret only shortlisted candidates will be notified. By submitting any application or résumé to us, you will be deemed to have agreed and consented to us collecting, using, retaining and disclosing your personal information to prospective employers for their consideration.

Yoong Poh Feng

EA License | 14C7092

EA Registration Number | R1105076

• Letter Of Credit / LC
• Shipping Documents
• Trading MNC

Job Scope:

• Prepare import / export shipping documents based on L/C, Certificate of Origin, Customs/Insurance declaration
• Monthly delivery / sales reporting
• Liaison and coordinate with suppliers, customers and forwarding agents to ensure smooth and timely cargo delivery
• Prepare Sales and Purchase contracts
• Provide admin support to the department

Requirements:

• Possess a Degree / GCE O / N Level
• Possess minimum 2 - 5 years' Shipping Documentation & Letter Of Credit / LC experiences
• Good communications and interpersonal skills
• Proficiency in MS Office (Words, Excel & PowerPoint)

To apply please click on the APPLY NOW button or email your resume with the following details inside your resume for faster processing:

• Reason for leaving each past & current employment
• Salary drawn for each past & current employment
• Expected Salary
• Earliest availability date

We regret only shortlisted candidates will be notified. By submitting any application or résumé to us, you will be deemed to have agreed and consented to us collecting, using, retaining and disclosing your personal information to prospective employers for their consideration.

Yoong Poh Feng

EA License | 14C7092

EA Registration Number | R1105076