Responsibilities:

• Define requirements and features for semiconductor equipment
• Develop concepts and architecture of new equipment
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps and valves.
• Produce detailed engineering drawings
• Perform design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Improve design of legacy machines
• Application of analysis tools like Fish Bone Diagram, FMEA etc.

Requirements:

• Degree in Mechanical or Mechatronics Engineering
• More than 5 years of experience in semiconductor equipment design
• Good knowledge and experience in the following areas :

1. Design of automation or semiconductor equipment
2. High precision machine design
3. Design of High Speed Pick and Place mechanisms

• Familiar with 3D CAD software
• Ability to plan, prioritize, and coordinate throughout the project cycle
• Ability to work independently with high level of motivation and communicate with all levels
• Equipment troubleshooting skills
• Ability to produce detailed Mechanical drawings and apply knowledge of
• Geometric Dimensioning & Tolerancing.

Responsibilities

• Liase with Architects, Clients and other Consultants for the design of structural and civil Engineering works.
• Design , coordinate, manage and supervise the civil & structural project that has been assigned.
• Perform structural analysis and design including drafting in building or any structures as required by the project.
• Liase with clients & consultants to meet C & S requirements for submissions to local authorities.
• Coordinate to ensure civil and structural requirements is meet for project tender,submission and construction schedule.

Requirements

• Degree in Civil / Structural Engineering.
• 1-2 experience in Structural Design and able to work independently will be preferred.
• Entry Level Candidate without experience are welcome to apply.
• Knowledge in AutoCad & Structural Software e.g. STAAD. Pro, Orion, Esteem, MidasGen, Etabs, etc will be advantage.
• Good positive working attitude, self-motivated and responsible.
• Salary will be commensurate based on working experience.

Job Descriptions

• Develop and Review Test Plan based on IC design specification
• Develop constrained-Random verification environment for complex DUT
• Develop/Modify Testbenches using UVM/SystemVerilog for Pre-Silion IP or SOCs
• Implement coverage matrix using cover point and assertion
• Create and debug tests for DUT
• Resolve bugs with remote designers

Requirements

• Bachelor/Masters Degree in Electrical/Electronics/Computer Engineering with min 1 year of experience
• Hands-on experience in Silicon/ IP verification using SystemVerilog/ UVM
• Strong understanding of verification process from test plan to coverage completion
• Strong communication and Analytical skills
• Understanding of HDL (Verilog, VHDL)
• Experience with designing with FPGA using Vivado is a plus

Ethos Search Associates Pte. Ltd.

EA Licence No: 13C6655
EA Reg No: R1109557 Rose

Job Descriptions

• Develop and Review Test Plan based on IC design specification
• Develop constrained-Random verification environment for complex DUT
• Develop/Modify Testbenches using UVM/SystemVerilog for Pre-Silion IP or SOCs
• Implement coverage matrix using cover point and assertion
• Create and debug tests for DUT
• Resolve bugs with remote designers

Requirements

• Bachelor/Masters Degree in Electrical/Electronics/Computer Engineering with min 1 year of experience
• Hands-on experience in Silicon/ IP verification using SystemVerilog/ UVM
• Strong understanding of verification process from test plan to coverage completion
• Strong communication and Analytical skills
• Understanding of HDL (Verilog, VHDL)
• Experience with designing with FPGA using Vivado is a plus

• Responsible for USB2.0/USB3.0 device driver development, test, optimisation, and maintenance.
• Perform WHQL testing and certification of drivers and device frameworks.
• Take part in all phases of SDLC and prepare corresponding documentation.

Requirements:

• Degree in Computer Science/Engineering
• At least 5 years of USB device drivers’ development experience in Windows/Linux/mac/WinCE
• Good knowledge of USB2.0/USB3.0/ USBCV protocols and USB Device Classes (HID, MSC, CDC, UVC, UAC, DFU, Custom).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Location: Redhill

Basic + Commission + VB

JD:

• Research market trends, competitor offerings, and emerging client needs within sectors like commercial office/Retail design & renovation
• Proactively seek out and generate new business leads through networking, events, industry associations, cold call and referrals.
• Draw up networking proposals customized to individual sector
• Liaison between client, designer and other parties leading up to the securing of project, while ensuring client’s requirements are met and exceeded
• Prepare sales and marketing materials
• Work on project pricing, contracts, and fee negotiations that balance profitability with competitive positioning.
• Achieve and Deliver Sales Target
• Support in all aspect of Sales activities
• Manage and maintain clientele relationship
• Collate and evaluate client feedback and highlighting client feedback from customers for management analysis and follow-up

Requirement

• Diploma in Marketing, Business, Interior Design, or a related field.
• Min 3 years of experience in Business development, preferably in the interior design on commercial office/retail.
• Strong communication and interpersonal skills, with an ability to understand design concepts & to liaise with individuals at all level
• Committed, sales target driven and self-motivated
• Responsible and team player.
• Creative mindset with a passion for interior design.
• Excellent networking & communication and negotiation skills, with the ability to liaise with individuals at all level
• Committed, sales target driven and self-motivated

HOW TO APPLY:

Interested applicants, please click on “Apply Now” or email [email protected]

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lim Wei Jye (Jaylyn)

EA Personnel Reg No: R24121213

Our client is a global leader specializing in high-performance cooling systems, gaming peripherals, and PC components.

Role Summary:
We are seeking an experienced Senior Design Quality Engineer to drive quality improvements for thermal cooling solutions. In this role, you will oversee design and process quality, ensuring products meet the highest standards of excellence. This position offers the opportunity to lead cross-functional initiatives and optimize production processes within a dynamic, global environment.

The incumbent will be based in Hanoi, Vietnam as part of the company's expansion plans and setting up of a manufacturing facility in Vietnam.

Key Responsibilities:

• Quality Monitoring & Optimization: Develop and implement advanced systems to monitor and enhance product quality and yield. Lead initiatives to identify and rectify areas for improvement.
• Quality Issue Management: Address and resolve abnormal quality issues in manufacturing processes. Work collaboratively across teams to implement corrective and preventive measures.
• Process Enhancement: Strengthen internal quality controls and enhance process efficiency, driving operational excellence.
• Customer Quality Assurance: Lead investigations into customer-reported issues, ensuring effective corrective actions and preventive solutions are communicated to stakeholders.
• Inspection Process Improvement: Optimize inspection processes, integrating automation and advanced technologies where applicable.
• Cross-Functional Collaboration: Coordinate closely with design, production, and other teams to maintain rigorous quality standards.
• Team Leadership: Oversee the performance, development, and task allocation of the quality team, ensuring timely delivery of objectives.

Qualifications:

• Bachelor’s degree or higher in a relevant field.
• Demonstrated experience in quality engineering, particularly in manufacturing and design quality.
• Strong analytical and problem-solving abilities, with proven leadership skills.
• Knowledge of quality management systems and industry standards.
• Certifications such as Six Sigma are advantageous.
• Willing to be based in Vietnam and travel where required

This role is ideal for a dedicated professional passionate about quality control and process improvement in the electronics industry. If you're ready to take on a leadership position in a fast-paced, innovative environment, we encourage you to apply!

Please click on "apply" with your updated resume attached.

Benefits:

• Basic salary can up to $2500 + Attractive Commission

• AWS + VB

Job Scope:

• Promote and demonstrate products to customers, emphasizing key features and benefits to boost sales.

• Engage with customers to assess their needs and provide guidance for informed purchasing decisions.

• Consistently meet or exceed sales targets set by the store or company.

• Ensure product displays are well-organized and visually appealing, while setting up promotions when necessary.

• Maintain accurate sales records and regularly report performance metrics to management.

Job Requirements:

• Prior experience in sales or retail is preferred.

To Apply, kindly click on the "APPLY NOW" button and job details.

We regret that only shortlisted candidates will be notified.

StaffKing Pte Ltd (20C0358) | Jasmine Wong (R22107578)

- Must have experience in interior design fitting out work for commercial project : F&B, RETAIL AND OFFICE .

- Knowledge in 3D max, PHOTOSHOP, AUTOCAD, etc.

- ENGLISH and CHINESE speaking preferred.

- Space planning and visualizes in 3D perspective.

- Prepare design proposal with materials.

- Prepare design documentations, attend site meetings, source for materials and construction drawings etc.

- Work closely with project team, suppliers, sub-contractors and clients during construction/implementation.

- Perform other ad-hoc duties as required.

Job description:

As a member of the filter design team, the successful candidate will play a key design role as a product owner of resonator/filter in development and commercialization of acoustic filters with both BAW and SAW technologies from beginning, concept meeting to end, mass production including characterization.

Experience with either SAW or BAW filter design -layout, simulation, fabrication, and characterization- is required for senior position and principal position is available for candidates with proven track record in ramping up commercialization of acoustics filters in mass production environment.

Responsibilities:

- Co-work with international team across China and Singapore on a cross-disciplinary team basis

- Use commercial circuit analysis and physical modelling tools as well as custom software packages to design and analyse acoustic filters

- Assist RF measurement analysis by generating test plans and analysing results

- Produce RF engineering reports to support team members

- Communicate with R&D team for co-design and device improvement

Qualifications/Desired skills:

- Track record in design and mass-production of SAW/BAW filters for mobile applications is highly desirable

- Strong skills and working knowledge of design simulation tools, e.g. ADS, AWR, HFSS, COMSOL, etc

- Understanding of RF test parameters and test equipment

- Understanding of filter application and mobile communication system and architecture

- Experience with drawing programs, schematic capture and PCB layout tools

- Experience in RFIC design, RF module and front-end system design is preferred

- Knowledge of MEMS fabrication

- Strong written and verbal English skills to support complex analysis

- Organized team player and a good learner who is open to discussions

Functional Competencies:

1. Perform review of marine construction, equipment of drawings / document according to applicable rules, regulations and delegations.
2. Communicate and work closely with internal and external stakeholders and ensure contract requirements are met.
3. Support and provide technical advice to clients.
4. Participate in meetings (both internal and external) as required.
5. Support Equipment & Material Certification team and Consultancy Services team in drawing review, inspection or consultancy work, as and when required.
6. Attend all scheduled trainings (locally and overseas) and ultimately achieving specified delegations as agreed in Performance Management Process.
7. Ensure timely and accurate submission of time & expense sheets.
8. Keep up to date with new rules, regulations and technical information or process disseminated through internal communication.

Requirements:

1. Degree qualified in Naval Architecture, Marine Engineering or equivalent with minimum 3 years relevant working experience on Marine and Offshore related field.
2. Minimum delegation level 1 within area of specialization: Hull, Machinery, Electrical / Automation, Safety, Stability / TLO.

Venture, a public listed company in SGX, is a leading global provider of technology services, products and solutions with established capabilities spanning marketing research, design, research and development. Over the years, Venture has built know-how and intellectual property with expertise in several technology domains. These include life science & genomics, molecular diagnostics, medical devices and equipment, healthcare and wellness technology, lifestyle consumer technology, health improvement products, instrumentation, test and measurement technology, networking and communications, fintech, as well as computing, printing and imaging technology.

Headquartered in Singapore, the Group comprises over 30 companies with global clusters in Southeast Asia, Northeast Asia, America and Europe, and employs over 12,000 people globally.

At Venture, our people are our most valuable asset. We are committed to unifying culture, encouraging innovation, and harnessing the collective strengths and synergies of our human capital to deliver compelling differentiation, advancing Venture’s position as a leading global provider of technology solutions, products and services.

We’re looking to add an Engineer, Design in Singapore. The position will be based in our Univac Site in Woodlands.

As an Engineer, Design, you will:

Responsible for product analyzing, design for manufacturing (DFM), tool design 3D and 2D drafting, tool review and debugging.

The key responsibilities are as below:

• Construct mold design layout and conduct mold design review meeting.
• Design precision plastic injection molds in accordance with the requirements.
• Mold management and liaise closely with internal and external customers on matters relating to mold design.
• Preparation of detail bill of material and maintain thorough documentation of hardcopy and softcopy.
• Participate in the First-Off Tool review and assess the suitability of the tool for production.
• Performs other duties as assigned.

What skills and experiences are we looking for?

• Possesses at least a Diploma in Mechanical, Manufacturing, Precision Engineering, and/or any equivalent engineering discipline.
• 2 years of working experience in tool design, and/or any relevant experience.
• Experience in making LSR mold design, as well as packaging mold design is an advantage.
• Proficient in AutoCAD, Unigraphics and Microsoft Office Applications.
• Familiar with engineering drawings and GD&T.
• Ability to develop complex designs to the point of manufacture and release to production.
• Knowledge of plastics & elastomers.
• Team player with a good verbal and written skills.

If you embody the spirit of excellence, passion for discovery, innovation and enterprise, and the desire to make a difference in the world of technology and electronics, come join the Venture team!

Be Part of the Global Venture Family.

Disclaimer:

By submitting your application to Venture Corporation Limited and its group of companies, you acknowledge and agree that any personal data you provide will be processed for the purpose of evaluating your application for employment.

If you are not selected for this position, we may retain your personal data to consider you for future employment opportunities unless you inform us otherwise. Should you wish to withdraw your consent or request access to or correction of your personal data, please contact our Personal Data Protection officer by email: [email protected]

For more details, please refer to our privacy policy at Personal Data Protection Policy of Venture Corporation Limited.

Job Description

Primarily responsible to develop and conceptualize designs for commercial & residential projects

Must be able to generate layout plan and 3D perspective drawings in fast-paced work environment

Project coordination and design documentation

Project administration

Proficiency in Autocad, VRay, Sketchup, 3D Max & Photoshop and AI.

Must have creative mind in terms of commercial and residential.

Strong In Interior Design conceptualizations.

Good communication skills

Creative with a strong sense for colors and texture.

Pleasant working attitude, self-motivated, hardworking and passionate.

Working hours : 9.00am to 6.00pm (Mon-Fri) , 9.00am - 1.00pm (Sat)

Overview

As a Design Engineer, you will assist the Technical Manager in all the designing, preparation, securing required legal documents for all the drawings (i.e.: shop drawings, structural drawings, architectural drawings and M&E drawings).

Responsibilities

1) Prepare and perform design for precast component according to client demand.

2) Responsible in the design and preparation of shop drawings and secure permits required by the government.

3) Review completed structural drawings, designs and specifications before issue for production.

4) Check and highlight all the discrepancies between Architectural, Structural and M&E drawings.

5) Co-ordinate with relevant parties on technical issues.

6) Plan & carry out production or service under controlled conditions – including product characteristics, work instructions / standard work methods, suitable equipment, Monitoring & Measurement (MM), release, delivery & post-delivery activities.

7) Ensure customer requirement are determined and met, thus enhance customer satisfaction.

8) Communicate to the organization the importance of meeting customer as well as statutory & regulatory requirement.

9) Establish the quality policy and objective.

10) Provide technical support for company operation.

11) Train, brief & supervise work and control process to work instructions / standard work methods and process plans.

12) Ensure planning & integrity of the Quality Management system (QMS).

13) Ensure Responsibility & Authority are defined & communicated.

14) Address customer satisfaction though the effective application of system, including processes for continual improvement and the prevention of non-conformity.

15) Conduct management review.

16) Ensure the availability of resources.

17) Determine, collect & analyze data for informed management decision.

18) Perform any other duties as assigned by the Management and the designated manager.

Requirements

1) Bachelor degree in Civil / Structural Engineering or equivalent.

2) Minimum 3 years of relevant work experience in precast concrete industry.

3) Experience in creating 3D models of building element.

4) Prosses excellent problem definition / analytical and problem solving skills.

5) Strong verbal and written communication skills as well as excellent customer relation skills.

6) Able to work independently.

7) A team player with the ability to multi-task, prioritize and organize tasks.

Job Description :

• Responsible for the execution of civil and structural design involving the preparation of calculations and review of structural design drawings in accordance to customers' specifications, applicable codes, standards and other generally accepted practices.
• Assist in producing tender specifications and design requirements for calling of tender contracts.
• Undertake detailed design of buildings and civil infrastructures.
• Work with Qualified Person (QP) to develop design scheme for civil and structural works.
• Involve in project planning, implementation and close monitoring of projects.
• Project coordination including submission to local authorities and liaison during the construction stage.
• Liaise with clients, consultants and authorities on technical matters.

Requirements :

• Candidates must possess at least degree in Civil Engineering (preferably recognised by PE Board).
• Engineers with minimum 1 years' experience in relevant engineering design work. Conversant with latest design codes and authority requirements (Codes of practice, directives, etc.).
• With good attitude towards work and timeline.

A & One Precision Engineering was founded in 1992 and established itself as one of the leaders in the global precision engineering industry. A & One has leading technological capabilities in advanced manufacturing and currently serves customers in the Semiconductor, Aerospace, Medical Technology, Energy, Consumer Electronics and Telecommunications Industries.
As a Design Engineer, your responsibilities are:

• Support NPI (New Product Introduction) on product design and development.
• Oversee the design and documentation of components made from precision machined parts and sheet metal.
• Employ Design for Six Sigma (DFSS) tools to enhance design manufacturability.
• Conduct impact analysis to refine designs, ensuring they meet specifications, project timelines, and cost objectives.
• Participate in technical discussions and present design solutions to clients.
• Coordinate the fabrication, assembly, and validation of prototypes to ensure they meet specifications.
• Prepare drawing proposal and tooling design.
• Conduct tooling buy-o7 and hands-on tooling setup.
• Initiate and conduct the improvement project evaluation.
• Liaise with customer on design requirement and alignment.
• Liaise with factory on capability compliance.
• Responsible on tooling expenses and cost control.

Requirements:

• Min. Diploma in Mechanical Engineering/ Mechatronics Engineering/ Precision Engineering.
• Proficient in using Solidworks and/or other 3D modelling software
• Proficient in using CAD/CAM Programming
• Preferably with working knowledge and experience in tool & die, jig & fixtures design.
• Familiarity with Geometric Dimensioning and Tolerancing (GD&T) and Tolerance Stack-up Analysis.

We’re looking for a Product Design intern to join us, in empowering people to build their long-term wealth. This is a 6-month, paid position based in SG, where you’ll embed into the design team of 3 Senior Product Designers and 1 Head of Design (all in SG).

As a PD intern at StashAway, you’ll get hands-on experience in product design end-to-end, from user research, to rough wireframe flows, to polished high-fidelity mockups, prototypes and more. You’ll learn and practice different design skillsets as we iterate our mobile app that caters to 5 regions.

This internship offers great exposure to DesignOps, as we are rebuilding the StashAway design system to be more scalable, and improving our team processes along the way. At the same time, we’re constantly releasing improvements to our mobile app. This means you’ll have lots of chances to participate in user research where we talk to customers, and team critiques where we analyse and iterate designs. You’ll also be involved in localising designs, working with our regional teams to manage translations. So, if you’re organised, detail-oriented and a good communicator, you’ll be a great fit for this internship.

It’s an exciting time to be at StashAway and we love what we do. Come join us and learn first-hand how products get built alongside a team of passionate designers.

Responsibilities

• Create and migrate Design System components, with guidance
• Write component documentation and usage guidelines
• Maintain Master Design Files to reflect latest features
• Upload copy to Lokalise for translation
• Support in user research end-to-end, including preparation and execution
• Execute QA of new components and upcoming releases
• Participate in weekly and ad hoc design critiques
• Analyse competitor flows and features

Must-haves

• Strong work ethic
• Enthusiasm and growth mindset
• Working proficiency in Figma
• Writing sample (e.g. academic coursework)
• Sample Figma file

Employee financial well-being

• Management fee discount: you will receive an employee discount on your asset management fees when you invest with StashAway.

Team bonding budget and initiatives

• Quarterly team bonding budget: we encourage you to socialise with colleagues across job functions, departments, and entities to know them better as individuals beyond what they professionally do.

Note: This role will require travel and based in China and Vietnam for at least 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Job Summary:

• We are seeking a talented Senior Design Quality Engineer (DQE) to lead quality initiatives for our thermal cooling solutions within the electronics and computing industry. The ideal candidate will be responsible for ensuring design and process quality while driving continuous improvements to achieve product excellence. If you are passionate about quality control, process optimization, and collaborating across functions, we encourage you to apply.

Key Responsibilities:

• Implement advanced monitoring systems to enhance product quality and yield. Identify areas for improvement and lead initiatives to optimize production processes.
• Take charge of addressing and improving abnormal quality issues in manufacturing processes. Collaborate with cross-functional teams to implement effective solutions and preventive measures.
• Strengthen internal quality control processes and improve overall capabilities, particularly in mechanical processes such as metal stamping, forging, brazing, die casting, CNC machining, and milling. Drive initiatives aimed at maximizing operational efficiency.
• Lead corrective actions for customer-reported quality issues and communicate preventive solutions to relevant stakeholders.
• Streamline quality inspection planning by integrating automation and advanced technologies whenever possible.
• Promote effective communication and coordination with design, production, and other teams to ensure adherence to quality standards.
• Manage task assignments, performance, and development of the quality team, ensuring timely completion of deliverables.

Requirements:

• Bachelor’s degree in Mechanical Engineering, Industrial Engineering, Quality Engineering, or a related field.
• Minimum of 5-7 years of experience in quality engineering, particularly in manufacturing and design quality.
• Proven experience in mechanical processes, including metal stamping, forging, brazing, die casting, CNC machining, milling, and knowledge of tooling and the design/manufacture of fixtures and jigs.
• Strong analytical, problem-solving, and leadership abilities.
• Familiarity with quality management systems and standards.
• Six Sigma certification or equivalent is a plus.
• Willingness to travel frequently and work abroad in China and Vietnam for at least 10 months per year (includes four round-trip tickets to Singapore annually and separate arrangements for living accommodations).

AWS Infrastructure Services owns the design, planning, delivery, and operation of all AWS global infrastructure. In other words, we’re the people who keep the cloud running. We support all AWS data centers and all of the servers, storage, networking, power, and cooling equipment that ensure our customers have continual access to the innovation they rely on. We work on the most challenging problems, with thousands of variables impacting the supply chain — and we’re looking for talented people who want to help.

You’ll join a diverse team of software, hardware, and network engineers, supply chain specialists, security experts, operations managers, and other vital roles. You’ll collaborate with people across AWS to help us deliver the highest standards for safety and security while providing seemingly infinite capacity at the lowest possible cost for our customers. And you’ll experience an inclusive culture that welcomes bold ideas and empowers you to own them to completion.

We are seeking an Electrical Engineer to become part of a world class engineering team to lead the Electrical design of our Data Centers across our rapidly expanding Asia Pacific (APAC) portfolio.

We're looking for candidates that share our customer obsession by providing innovative solutions to enhance our market leading reliability. Technical leaders that can explain complex systems in clear and concise language. We contribute to our global body of knowledge and drive a cycle of continuous improvement at a global scale. We are looking for engineers with hands on electrical design experience across the project lifecycle from concept design through construction, to commissioning and handover. You will be relied on as a subject matter expert in the electrical engineering field. At Amazon we highly support continued learning opportunities and focus on continued employee development.

You must be able to work within a team and depend on others to accomplish the required work. As an electrical engineer at Amazon you will be working with other internal groups as well as external groups including utilities, manufacturers, vendors, consultants and contractors.

Amazon has a global presence and a 25% travel will be expected as part of this role. Projects will be throughout the region and a degree of international travel and support will be necessary.

We are the leaders in our industry. We always strive to improve in every aspect of our business. Continuous improvement through Lean Engineering practices is fundamental to our business. As an engineer within our team you will spend a regular part of your time analyzing and improving every aspect of our value stream.

Key job responsibilities
The Electrical Engineer will be responsible for the following:
• Lead Data center electrical designs in collaboration with other disciplines to create a coordinated construction document set
• Participate in site selection reviews and work with local utilities to understand and define site utility requirements
• Critical Data Center equipment design including site-wide MV infrastructure, Generators, Uninterruptible Power Supplies, Switchgear, Transformers and Earthing
• Creation of designs which meet or exceed our quality requirements and fall within our budgetary requirements
• Work with regional vendors and manufacturers to specify the appropriate electrical equipment
• Work with local agencies having jurisdiction to ensure compliance with IEC requirements, the various APAC wide design codes and other jurisdictional requirements
• Review and approval of equipment submittals and ability to work on concurrent projects in multiple geographical regions
• Define project scope and provide technical support for information requests prior to, and during construction phases
• Work with commissioning teams to properly test and validate installation, operation, and performance of electrical systems
• Travel to sites for site review and work with onsite field engineers, as well as provide engineering evaluations, electrical systems audits, and startup as needed

About the team
Diverse Experiences
AWS values diverse experiences. Even if you do not meet all of the qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn’t followed a traditional path, or includes alternative experiences, don’t let it stop you from applying.

Why AWS?
Amazon Web Services (AWS) is the world’s most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating — that’s why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses.

Inclusive Team Culture
Here at AWS, it’s in our nature to learn and be curious. Our employee-led affinity groups foster a culture of inclusion that empower us to be proud of our differences. Ongoing events and learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon (gender diversity) conferences, inspire us to never stop embracing our uniqueness.

Mentorship & Career Growth
We’re continuously raising our performance bar as we strive to become Earth’s Best Employer. That’s why you’ll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional.

Work/Life Balance
We value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why flexible work hours and arrangements are part of our culture. When we feel supported in the workplace and at home, there’s nothing we can’t achieve in the cloud.

Basic qualifications

• Degree in an Electrical Engineering field and 3+ years of experience directly related to data center or mission critical facility design

• Comprehensive understanding of the various code requirements across the APAC region

• Fundamental understanding of critical MV and LV electrical equipment • Detailed understanding of MV system modelling, relays, protections schemes, circuit breakers, power and distribution transformers electrical switchgear, grounding and earthing

Preferred qualifications

• Previous consultant negotiation and management skills associated with design, construction and project execution

• Experience with fast track design/build projects and or multiple significant upgrade projects

• Experience with large scale technical operations or large-scale compute farms and knowledge of building codes and regulations

• Ability to research new designs, technologies, and construction methods of data center equipment and facilities and to carry new design concepts through exploration, development, and into deployment/construction

• The ability to perform complex business case analysis to justify technical decisions and present the justification to management in a high level review

The Design Bridge & Viaduct Specialist shall be an engineer in the civil/structural discipline with educational qualifications recognised by the Professional Engineers Board of Singapore, with at least eight (8) years of relevant experience on projects similar in nature to the Works in the Civil Contract, including at least five (5) years in the design and supervision of viaduct works of a similar size and complexity. shall have proven expertise and experience in viaduct precast concrete segmental construction.

Senior Design Electrical Engineer

Job Responsibilities:

• Lead technical assignments for electrical hardware product design and development.
• Design, fabricate, modify, and evaluate electromechanical devices, components, or systems.
• Develop initial concepts and participate in detailed product design.
• Create original hardware, circuits, components, software, processes, and models.
• Participate in design reviews, providing DFM and DFA inputs.
• Prepare and release engineering drawings/schematics and communicate with vendors.
• ECO release of engineering documentation.
• Design AC/DC power distribution systems, PCBA, and components.
• Develop, test, and document designs.
• Estimate product/project requirements (power consumption, weight, size, schedule).
• Coordinate with manufacturing during pilot/production runs.
• Interface with customers to understand technical requirements.
• Troubleshoot electrical issues, including on-site support.
• Collaborate with cross-functional teams (Purchasing, Marketing, Service, QA).
• Assist engineering management in developing schedules and specifications.

Requirements:

• Bachelor's Degree + 6 years' experience / Master's Degree + 3 years' experience in Electrical/Electronics/Mechatronics Engineering
• Working knowledge of electrical systems (motion, temperature measurement, PID loops, safety interlock circuits)
• Experience with dynamic electromechanical system design
• Proficient in Orcad, Autocad, PCAD, Solidworks, or similar 3D CAD software
• Design knowledge of NFPA, Semi Safety Requirements, and Machine safety

Interested candidates who wish to apply for the advertised position, please click on “Apply”.

We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394 (PERSOLKELLY SINGAPORE Pte Ltd)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy

Company Profile
Julian Grey's client is a precision engineering firm for laser, optics, and photonics.

Responsibilities

• Conduct feasibility studies, develop design specifications, and support design proposals.
• Create conceptual and detailed designs for automation equipment, including material handling and process automation.
• Produce detailed CAD drawings using Autodesk Inventor or similar software, and release comprehensive design documentation.
• Work with the manufacturing team on Design for Manufacturing (DFM), assembly processes and qualification procedures.
• Assemble, test and qualify prototypes, troubleshooting as necessary to ensure project timelines and budgets are met.

Requirements

• Experienced in designing industrial automation using Autodesk Inventor, with expertise in pneumatics, motion components, DFM, DFA, and GD&T.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Responsibilities:

• Work directly with the customer to understand application constraints and performance criteria to translate their needs into design requirements optimized for 3D Printing
• Implement generative design and topology optimization techniques to enhance efficiency and material utilization and ensure that parts designed consider factors such as build orientation, support structures, and material characteristics
• Generate and finalize part design and assist process engineers to develop proper manufacturing processes
• Stay abreast of advancements in metal 3D printing technologies, materials, and design methodologies and continuously evaluate and integrate new tools and techniques to improve design processes and outcomes

Qualifications：

• Master in mechanical engineering or similar technical discipline
• 3+ years in metal 3D printing
• Experience using Additive Manufacturing Software such as Materialise Magics
• Familiarity with a range of additive manufacturing materials and their properties
• Strong problem-solving skills and the ability to think innovatively in the context of additive manufacturing
• Excellent communication skills for effectively conveying design concepts and collaborating with team members
• Willing to travel (25% of time)

Responsibilities

• Responsible for implementing ISP Algorithm into HW using Verilog, SystemVerilog and/or SystemC (High Level Synthesis)
• Verify Logic at ISP level and Digital System level
• Optimize Design for less gate count and low power consumption
• Drive ISP Design activities in close collaboration with ISP Algorithm Team

Requirements

• Minimum MSEE, or BSEE, or related/equivalent discipline
• Experience / knowledge in RTL, C/C++ programming and verification
• Strong debugging and problem-solving skills
• Good communication and interpersonal skills
• Result oriented and embrace change behaviours
• C++/SystemC knowledge with High Level Synthesis experience is a plus.
• Experience / knowledge in CMOS Image Sensor is a plus