• Proficient in using electrical and manual equipment and measurement tools
• Translate drawings over to workable and buildable projects
• Cut, shape timber according to measurements/requirements
• Installation of wooden fixtures such as cabinets or shelving unit
• Maintenance of differing wooden fixtures or repairs

• Report to QPS and QP (Geo) on all design matters
• Ensure that the contractor's design are in compliance with LTA's specifications and requirements
• Assist to check on the design calculations
• To liaise with AC and QP(D) to ensure that all permits and applications as required by BCA are endorsed in tandem with the progress of the Works
• Lead in the review of Contractor’s submissions required of the Consultant and coordinate with his respective QP(S) and the Contractor’s design teams to ensure prompt resolution of all design-related issues arising from the reviews of the Temporary and Permanent Works.

Responsibilities:

• The Senior Design Engineer (SDE) shall be an engineer in the civil/structural discipline with at least a degree recognised by the Professional Engineers Board of Singapore
• At least ten (10) years of relevant experience on projects similar in nature to vehicular tunnel, including at least five (5)years in the design of geotechnical works for deep excavation

Stand in rate to be discussed during interview.

Roles & Responsibilities

• Provide space planning, design conceptualization, materials and color scheme specification based on client needs
• Develop 3d renderings & layout plans with detailed specifications (i.e. M&E plans, carpentry detail and sectional drawings)
• Management of projects to meet deadlines
• Involve in site measurement, site marking & selection of material used
• Preparation of mood boards and material boards
• Assist in project management and site supervision
• Ability to prepare quotations are an added advantage

Requirements

• Diploma / Bachelors’ Degree in Interior Design or ID Architecture
• Proficiency with AutoCAD, 3D Max/Vray, Sketchup & Photoshop
• Preferably with relevant experience as an Interior Designer, however entry level with no experience are welcome to apply
• Good knowledge of the design process, including furniture/carpentry systems, specifications and detailing, basic M&E and detail construction drawings, color & materials
• Self-motivated, hardworking, willingness to work independently
• Project management skills and able to think out of the box

To apply

For application, please submit your CV AND portfolio CV should also include the following:

• Current/ last drawn salary
• Expected salary
• Notice period (if any)

• 5 day work week

• Responsible for assembling and building prototypes

• Medical & Dental insurance & Quarterly Bonus.

 JOB DESCRIPTION

SIGMADESIGN is a fun, fast-paced engineering consulting company currently experiencing explosive growth. We are looking for an Assembly Technician. Curiosity, competency and confidence are a must.

Primary Function :

Responsible for assembling and building prototypes and products utilizing various tools in support of SIGMADESIGN’s engineering production and manufacturing activities. Occasionally provides support in the form of documentation and troubleshooting until units/parts are completed to acceptable test procedures and routing operations.

Essential Job Functions – Responsibilities :

• Performs processes to complete mechanical and electrical assemblies, subassemblies, electrical wiring, and wire harness assembly using common hand tools and electronic lab tooling.
• Tests functional performance of assembly and observes and records results.
• Assembles products according to routings and blueprints; measures parts to specified tolerances.
• Uses hand tools, chemicals and adhesives as needed.
• Maintains and monitors test equipment as necessary to ensure continued accuracy.
• Keeps production supervisors advised of work status, workload, problems and progress as related to work assignments.
• Demonstrate Technical Capacity, Learning Orientation, Time Management, and Thoroughness Skills.
• Maintain a clean and safe work environment including tools and assembly production areas.

Education and Experience: (Knowledge, Skills, & Abilities)

• Minimum NITEC in any Engineering discipline
• Minimum one year of recent direct or related experience required.
• Basic computer literacy skills, basic file structure understanding, and web navigation; working knowledge of Microsoft Office productivity tools including Outlook, Excel, and Word.
• Experience and ability reading and creating simple schematics; able to strictly follow engineering directions or procedures as required.
• Ability to multitask (make progress on multiple unrelated projects) and prioritize workload.
• Detail oriented with a focus on quality, execution and follow through.
• Hands-on skills and mechanical aptitude skills required.
• Excellent written and verbal communications skills.
• Strong basic math skills.
• Experience or familiarity with multimeters, oscilloscopes, and other typical electronic lab equipment a plus.

Work Environment:

Standard lab/production environment. Air-conditioned facility. Occasionally may be required to work in environmental conditions that emulate typical user environments in order to facilitate design testing and validation.

Compensation/Benefits:

• Salary will commensurate according to experience
• Profit Sharing
• Medical & Dental Insurance
• Paid Annual Leave

Click Apply Now for an interview!

Job Description & Requirements

DM Interior Design Singapore is hiring Sales Designers. We are looking for passionate individuals to join our dynamic team!

Here’s a chance for you to transform your career:

✔️ Full time sales designer

✔️ Minimum 3 years sales experience in the interior design sales industry

JOB HIGHLIGHTS:

⭐️ In-house training and close mentorship

⭐️Elevated Income

⭐️Great career advancement opportunities

⭐️Substantial personal elevation & growth

⭐️Tight-knitted team, enjoyable work environment

⭐️Convenient central office location

Email your resumes to [email protected] / or whatsapp to +6598630986

The Role:

We would like to get on board a Telecommunication engineer (or similar) to work inside of the railway communication infrastructure area, to develop and deploy communication transport solutions (fixed and radio) for large international railway projects. Main tasks to be performed by the COMMS engineer:

o Analysis of project requirements and propose the solutions accordingly.

o Development of system technical specifications.

o Development of system architectures and integration with 3rd parties' systems.

o Technical interface with customers and other contractors.

o Realization of testing and commissioning works onsite.

o Network troubleshooting for wired and wireless systems both.

o Technical support to systems once into operation after commissioning.

o Onsite testing and commissioning.

The Requirements:

• Tertiary qualification in Electrical and Electronics Engineering

• Minimum 2 years experience working on various communication systems technologies such as fibre-optic transmissions, digital trunked radio, public address and telephony, CCTV surveillance, access management and travel information systems preferred

To Apply:

Please send your latest CV in word file to [email protected]

Kindly indicate your availability, current and expected remuneration package.

We regret that only shortlisted candidates will be notified.

For more job opportunities, please visit our career page: http://quinnox-solutions.com/c...

Quinnox Solutions Pte Ltd (License Number: 06C3126)

Registered EA Personnel (Reg. No.R21103082)

Senior Marketing & Communication Executive

Location: Gul Crescent [Company Transport @ Chinese Garden, Lakeside, Boon Lay]
Working Hours: 8.15am - 5.45pm
Working Days: 5 Days [Monday - Friday]
Salary: $3,000 to $3,500

Responsibilities

• Attend to customer enquiries through various channels such as email, phone and in person.
• Design and/or edit marketing collaterals (brochure, leaflets etc)
• Oversee library of self-produced and principal supplied brochure, video resources and other Marketing and Sales support materials.
• Conceptualise, plan and execute marketing campaigns; both online and offline
• Handle all activities related to organisation of events (training, product seminars, roadshows, exhibitions – event budget, liaising with vendors, handling, registration, managing exhibition booths etc)
• Maintain website and work with vendor.
• Social media management, review and assist to maximise brand experience and engagement.
• Explore opportunities with different e-commence platforms and partners for collaboration.
• Execution of content creation (videography, photography) and produce product videos.
• Prepare and update price list.
• Any other ad-hoc duties assigned.

Requirements:

• Bachelor’s degree in marketing, Digital Marketing, or related field
• At least 2 years of relevant working experience
• Experience in digital marketing and social media management.
• Knowledge of graphic design software (e.g., Adobe Creative Suite)
• Familiarity with marketing analytics tools (e.g., Google Analytics)

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

Our client is a global leader in semiconductor inspection solutions.

• Identify requirements and features for semiconductor equipment and create concepts and architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Responsible for design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Create a detailed Mechanical drawing and apply analysis tools like Fish Bone Diagram and FMEA.

Requirements:

• Degree in Mechanical Engineering or equivalent
• At least 5 years of experience in Die Sorter.
• Familiar with 3D CAD software.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 3 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.
• Candidates with no prior working experience are welcome to apply.

(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-Level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 5 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Our client is a prominent construction firm in Singapore, offering comprehensive and integrated services within the construction sector.

• Coordinate design drawings with consultants to adhere with requirements of the authorities.
• Review and give solutions to technical problems and plan, monitor and report shop drawing production progress.
• Handle technical submissions for materials, construction methods and C&S shop drawings.

Requirements:

• Professional Engineer Registered with the PE Board.
• Degree in Civil Engineering or equivalent.
• At least 3 years of design working experience with main contractors.
• Familiar in British and Singapore Design Standards.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Roles & Responsibilities

• Coordinate and oversee the design of electrical and mechanical systems for LTA infrastructure projects
• Ensure that E&M designs comply with local regulations, LTA standards, and project specifications.
• Collaborate with engineers, consultants, and contractors to ensure smooth integration of E&M systems with other project elements (civil, structural, and architectural).
• Conduct design reviews, ensuring alignment with project requirements and resolving any discrepancies or technical challenges.
• Liaise with LTA representatives and ensure design submissions are timely and meet LTA’s approval process.
• Manage and track the progress of E&M design deliverables to ensure timely completion.
• Assist in resolving on-site technical issues related to E&M systems and provide design clarification to construction teams.
• Ensure that safety and quality standards are upheld in all E&M design implementations.
• Prepare regular reports on the progress of E&M designs and updates for the project management team.

Job Requirements

• Bachelor’s degree in Electrical Engineering, Mechanical Engineering, or a related field.
• 5–8 years of experience in E&M design coordination, particularly in infrastructure or transport-related projects.
• Experience working on LTA projects or other government-regulated transport infrastructure projects is highly desirable.
• Proven track record in managing the design and installation of electrical and mechanical systems.

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 8 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

Working day: Monday - Friday
Working Hour: 830am - 6:15pm
Salary range: $4,000 - $6,000 (depend on experience)
Location: Woodlands Ave 9

Responsibilities:

As a Senior Mechanical Design Engineer, you'll play a crucial role in our team, leading the design and development of our products from concept to production. Your focus will be on driving innovation, ensuring our products meet the highest standards of quality, performance, and reliability. You will collaborate closely with cross-functional teams, playing a key role within the team.

Job Responsibilities:

• Analyze project requirements and develop innovative solutions to meet customer needs.
• Design high precision and high-tech automation equipment, ensuring that it meets performance, quality, and reliability standards.
• Select components such as servo axes and robots based on project requirements.
• Coordinate with fabrication houses and component suppliers to ensure timely delivery of parts and components.
• Guide assembly technicians in building and testing the equipment, ensuring that it meets design specifications and performance requirements.
• Conduct design reviews and provide feedback to ensure continuous improvement of our products.
• Stay up to date with the latest developments in mechanical engineering and automation technology.
• Other duties as assigned.

Job Requirement

• Bachelor’s degree / Diploma in Mechanical Engineering / Mechatronics or related field preferred.
• Min 6 years of relevant experience in automation equipment design.
• Knowledge and experience in factory automation is an advantage.
• Experience in electrical, pneumatic, and sensor component selections.
• Proficient in SolidWorks 3D software.
• Strong understanding of mechanical engineering principles, materials, and manufacturing processes

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

Job Purpose:

The Art Teacher is responsible for developing each child interest in arts and the ability to express their artistic ability and creativity, to acquire knowledge and aesthetic understanding, to nurture and develop talents.

Job Responsibility:

• Prepare course materials and execute planned art curriculum lessons in group settings.
• Educate and nurture child to express artistic ability, creativity through principles of art and techniques.
• Demonstrate art techniques in activities including drawing and painting.
• Provide guidance by which children develop aesthetic concepts and appreciations.
• Guide and explain to children on proper care and use of art materials and tools.
• Adopt supportive classroom approach which facilitates positive learning and development.
• Encourage children to express their own personalities and thoughts through creative process.
• Evaluate each child’s performance and growth in knowledge and aesthetic understandings.
• Provide quality feedback on child’s development progress.
• Participate in campus events including parent meeting sessions and festive events.
• Perform any other duties and responsibilities as assigned by the Art Teacher (Supervisor).

Job Requirement:

• Possess Diploma or Bachelor degree in Arts or equivalent.
• Prior experience working in classroom setting is an added advantage.
• Candidates who are innovative, highly driven and take initiative are encouraged to apply.
• Passionate in engaging, teaching and developing children.

Working Hours (43 hours per work week):

Mon : off

Tuesday - Friday : 1.30pm - 7.30pm

Saturday and Sunday: 9.00am - 7.30pm

Are you ready to redefine the boundaries of creativity? The Other Lab is seeking a visionary Digital Art Director to spearhead our daring experiments.

At The Other Lab, we don't just think outside the box – we dismantle it. We thrive on challenges, embracing chaos as the catalyst for groundbreaking ideas.

If you're a trailblazer with a passion for pushing boundaries and a portfolio that speaks volumes, let's chat.

Digital Art Director

Responsibilities

• To generate exciting ideas to fulfil clients’ briefs and to engage in executing layout designs for art work and copy
• Independently oversee a project cycle; from conceptual to production
• Meets art department work standards by following production, productivity, quality, and customer-service standards; resolving operational problems; identifying work process improvements
• Produces illustrative material by assigning layout design concept to artists and photographers; directing development of design concepts into art layouts
• Prepares layouts for printing by marking-up, pasting-up, and finishing layouts
• Have a positive attitude towards collaborating with team members and other stakeholders to participate in pitches
• Competent in bringing the ideas to life visually
• Ensuring a high standard of visual execution across all media and campaigns

Requirements

• Candidates should possess about 3 years of relevant experience with an integrated portfolio
• An excellent team player and to be able to work well with front-end/back-end programmers
• Possess a good eye for craft with the ability to work independently
• Good communication and presentation skills
• Strong production knowledge in TV, Print and Digital
• Experience in UX / wireframes
• Competent in Photoshop, Illustrator, Aftereffects and Figma

Job Purpose:

The Art Teacher is responsible for developing each child interest in arts and the ability to express their artistic ability and creativity, to acquire knowledge and aesthetic understanding, to nurture and develop talents.

Job Responsibility:

• Prepare course materials and execute planned art curriculum lessons in group settings.
• Educate and nurture child to express artistic ability, creativity through principles of art and techniques.
• Demonstrate art techniques in activities including drawing and painting.
• Provide guidance by which children develop aesthetic concepts and appreciations.
• Guide and explain to children on proper care and use of art materials and tools.
• Adopt supportive classroom approach which facilitates positive learning and development.
• Encourage children to express their own personalities and thoughts through creative process.
• Evaluate each child’s performance and growth in knowledge and aesthetic understandings.
• Provide quality feedback on child’s development progress.
• Participate in campus events including parent meeting sessions and festive events.
• Perform any other duties and responsibilities as assigned by the Art Teacher (Supervisor).

Job Requirement:

• Possess Diploma or Bachelor degree in Arts or equivalent.
• Prior experience working in classroom setting is an added advantage.
• Candidates who are innovative, highly driven and take initiative are encouraged to apply.
• Passionate in engaging, teaching and developing children.

Working Hours (43 hours per work week):

Mon : off

Tuesday - Friday : 1.30pm - 7.30pm

Saturday and Sunday: 9.00am - 7.30pm

Job Purpose:

The Art Teacher is responsible for developing each child interest in arts and the ability to express their artistic ability and creativity, to acquire knowledge and aesthetic understanding, to nurture and develop talents.

Job Responsibility:

• Prepare course materials and execute planned art curriculum lessons in group settings.
• Educate and nurture child to express artistic ability, creativity through principles of art and techniques.
• Demonstrate art techniques in activities including drawing and painting.
• Provide guidance by which children develop aesthetic concepts and appreciations.
• Guide and explain to children on proper care and use of art materials and tools.
• Adopt supportive classroom approach which facilitates positive learning and development.
• Encourage children to express their own personalities and thoughts through creative process.
• Evaluate each child’s performance and growth in knowledge and aesthetic understandings.
• Provide quality feedback on child’s development progress.
• Participate in campus events including parent meeting sessions and festive events.
• Perform any other duties and responsibilities as assigned by the Art Teacher (Supervisor).

Job Requirement:

• Possess Diploma or Bachelor degree in Arts or equivalent.
• Prior experience working in classroom setting is an added advantage.
• Candidates who are innovative, highly driven and take initiative are encouraged to apply.
• Passionate in engaging, teaching and developing children.

Working Hours (43 hours per work week):

Mon : off

Tuesday - Friday : 1.30pm - 7.30pm

Saturday and Sunday: 9.00am - 7.30pm

• Work closely with the sales team to identify and scope opportunities for the Cadence FED platform.
• Understand the Goal and Objective, then plan and execute and manage key technical evaluations by co-working proactively with existing and potential customers as well as team colleagues
• Train, ramp-up and accompany customer project.
• Conduct basic and advanced training, presentations and demos as necessary.
• Ramp-up other members of the team on the advanced FED front-end technologies and tools.
• Providing technical expertise to address clients’ queries, which need expert involvement

This position requires:

• 10+ years’ experience in digital IC implementation including logic synthesis, physical synthesis, floorplan, placement, STA signoff.
• Hands-on experience on running advanced process hierarchical, timing driven, SI prevention, low power place-and-route projects a big plus
• Familiar with logic synthesis tool (DC or Genus), P&R basic knowledge of ICC or EDI, STA (Tempus or PrimeTime-SI), Equivalence Checking (conformal-EC or Formality), UPF/CPF concept
• Knowledge of Linux and tcl is a must
• Good program/engagement management skill
• Effective team player, willing to learn

• Work closely with the sales team to identify and scope opportunities for the Cadence FED platform.
• Understand the Goal and Objective, then plan and execute and manage key technical evaluations by co-working proactively with existing and potential customers as well as team colleagues
• Train, ramp-up and accompany customer project.
• Conduct basic and advanced training, presentations and demos as necessary.
• Ramp-up other members of the team on the advanced FED front-end technologies and tools.
• Providing technical expertise to address clients’ queries, which need expert involvement

This position requires:

• 10+ years’ experience in digital IC implementation including logic synthesis, physical synthesis, floorplan, placement, STA signoff.
• Hands-on experience on running advanced process hierarchical, timing driven, SI prevention, low power place-and-route projects a big plus
• Familiar with logic synthesis tool (DC or Genus), P&R basic knowledge of ICC or EDI, STA (Tempus or PrimeTime-SI), Equivalence Checking (conformal-EC or Formality), UPF/CPF concept
• Knowledge of Linux and tcl is a must
• Good program/engagement management skill
• Effective team player, willing to learn

Part Time Position Only.

Responsibilities

1. Demonstrate proficiency in various art techniques, mediums, and styles.
2. Effectively teach students how to use them to express their ideas and emotions.
3. Provide guidance and support to students in developing their artistic skills - drawing, painting, sculpting, and other art forms.
4. Create a positive and inspiring classroom environment that encourages experimentation, self-expression, and collaboration among students.
5. Evaluate and provide constructive feedback on students' artwork, helping them identify areas of improvement and celebrating their achievements.
6. Engage students with sensory play.
7. Ensure a safe and orderly art classroom environment, following appropriate safety guidelines and procedures for handling art materials and equipment.
8. Engage children in lessons, ensuring activities are fun and age-appropriate.
9. Maintain Good and Professional relations with Children and Parents.

Requirements

1. Teamplayer and able to work in a team.
2. Demonstrate proficiency in various art techniques, mediums, and styles.
3. Previous experience teaching art to students of various age groups (2.5-5 YO) and skill levels.
4. Passion for art education and a commitment to fostering creativity and artistic growth in students.
5. Enthusiastic individual that has initiative, high adaptability
6. Strong communication and interpersonal skills, with the ability to connect with students, parents, and colleagues effectively.
7. Maintain tidiness and cleanliness of studio.
8. Knowledge of safety protocols and procedures for handling art materials and equipment.
9. Able to converse in English and/or Mandarin (as will need to liaise with student and/or parents who speaks in mandarin)

Working Hours
Wed - Fri: 1pm-8pm
Sat - Sun: 9am-7pm

Closed on PH.

Position Title: Jewellery Design

Location: Orchard

Working Days: 5-day work week, full time employment

Working Hours: 10.45am – 9pm

Salary: $2,400- $3,300

The Role:

We are looking for an in-house jewellery designer. You will be working directly with the customers and to create bespoke designs. This role is multi-faceted and you would be also operating as a sales executive when clients are in the boutique. When you are with clients, you are expected to provide them with product knowledge and effectively sell both the brand and product. You will be required to share brand history, product knowledge and the highest level of customer service with all potential customers. As a designer, you need to be able to discuss a range of design options and formulate creative original ideas. You would be required to sketch out ideas and designs, sometime using computer-aided design (CAD), to help the client visualize the final design.

Skills:

Formal training in Jewellery Design

• Drawing and computer design skills to produce designs
• Work with deadlines
• Commercial awareness and practical knowledge when designing

Requirements:

• Basic I.T. skills are necessary, knowledge of MS Excel and Word
• Advanced skills in PhotoShop, Illustrator
• Able to commit to retail hours including weekends and public holidays

✅The Supreme HR Advisory Pte Ltd EA No: 14c7279

✅SAMUEL SIAW Reg No: R24124745

Singapore Based (Ang Mo Kio)

5 Days work per week (Mon – Fri 8.30am – 6pm)

$6000 to $9500

Degree / Diploma in Electrical Engineering, Mechanical Engineering or Building Services. + Good knowledge in M&E works, planning capability and authorities / statutory compliance.

Minimum 8-10 years’ experience in Mechanical & Electrical services. + Good knowledge and experienced in Design & Build Tender for M&E services is preferred

Career Progression Opportunities

Job scope

Preparation and submission of M&E tenders, including reviewing technical specifications, cost estimates and project timelines.

Taking charge on M&E QS related matters and responsible from tender to pre-contract and post contract administration duties.

Prepare tender clarifications, liaise with consultant, attend site visit and tender briefings/meetings.

Responsible for interpretation of specifications, compliances, review of tender drawings for any discrepancies and any other relevant document.

Conduct detailed technical evaluations of tender documents to ensure compliance with project requirements and industry standards.

Identify potential risks and challenges associated with tender submissions and develop mitigation strategies.

Plan and execute with tender team to achieve KPI.

Suggest Value Engineering solution for MEP works, if required, in the tender.

Assist in the presentation slide, technical write up for tender submission/interview and attendance of tender interview.

Involve in project write up such as understanding scope of work, manpower histogram, programs and project schedule using Microsoft Project software.

Provide technical expertise and guidance to support the decision-making process during tender evaluations.

Evaluating quotations from sub-cons/suppliers according to tender requirement.

Whatsapp: +65 80135651(Alvin)

Alvin Chua Ming Jing:R23116192

The Supreme HR Advisory Pte Ltd: 14C7279

Senior Marketing & Communication Executive

Location: Gul Crescent [Company Transport @ Chinese Garden, Lakeside, Boon Lay]
Working Hours: 8.15am - 5.45pm
Working Days: 5 Days [Monday - Friday]
Salary: $3,000 to $3,500

Responsibilities

• Attend to customer enquiries through various channels such as email, phone and in person.
• Design and/or edit marketing collaterals (brochure, leaflets etc)
• Oversee library of self-produced and principal supplied brochure, video resources and other Marketing and Sales support materials.
• Conceptualise, plan and execute marketing campaigns; both online and offline
• Handle all activities related to organisation of events (training, product seminars, roadshows, exhibitions – event budget, liaising with vendors, handling, registration, managing exhibition booths etc)
• Maintain website and work with vendor.
• Social media management, review and assist to maximise brand experience and engagement.
• Explore opportunities with different e-commence platforms and partners for collaboration.
• Execution of content creation (videography, photography) and produce product videos.
• Prepare and update price list.
• Any other ad-hoc duties assigned.

Requirements:

• Bachelor’s degree in marketing, Digital Marketing, or related field
• At least 2 years of relevant working experience
• Experience in digital marketing and social media management.
• Knowledge of graphic design software (e.g., Adobe Creative Suite)
• Familiarity with marketing analytics tools (e.g., Google Analytics)

Chew Xing Shan Reg No: R22107044

The Supreme HR Advisory Pte Ltd EA No: 14C7279

WhatsApp: +65 83592812 [Shannon]