Responsibilities:

• Define requirements and features for Back-end semiconductor equipment.
• Develop and improve the concepts/architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Produce detailed engineering drawings.
• Perform design verification and validation testing to ensure compliance with specifications, safety regulations, and product requirements.
• Application of analysis tools like Fish Bone Diagram, FMEA, DOE, etc.

Requirements:

• Degree in Mechanical or Mechatronics Engineering with minimum of 5 years of experience in automation design.
• Good knowledge and experience in the design of Automation or semiconductor equipment, High precision machine design, or Design of High-Speed Pick and Place mechanisms.
• Proficient with 3D CAD software and performing Equipment troubleshooting.
• Able to produce detailed Mechanical drawings and apply knowledge of Geometric Dimensioning & Tolerancing.
• Ability to work independently with high level of motivation and communicate with all levels.
• Able to travel overseas for field support when required.

To apply, please click "Apply Now" or visit www.gmprecruit.com and search for job reference: 21623

GMP Technologies (S) Pte Ltd | EA Licence 11C3793 | EA Personnel: Novita Widjaja | Registration No: R22105960

Job Description:

We are looking for an Analog Chip Design Engineer to lead the development of digital standard cell libraries and design advanced analog circuits. You will optimize circuit designs, innovate new digital standard cells, and collaborate with cross-functional teams to meet performance, power, and area requirements.

Key Responsibilities:

• Circuit Design & Optimization: Lead analog circuit design, optimize for speed, power, and reliability using Cadence Virtuoso, Spectre, and HSPICE.
• Digital Standard Cell Libraries: Develop high-performance, low-power digital standard cells.
• Innovative Architecture Development: Research and design innovative digital standard cell architectures and explore new logic families and power-saving techniques.
• Collaboration: Work with layout designers to ensure manufacturability, performance, and adherence to DFM/DFT standards.

Qualifications:

• Education: Bachelor’s degree or higher in Electronics Engineering, Computer Science, or related field. Master’s or Ph.D. is a plus.
• Experience: 5+ years in high-performance analog design with expertise in deep sub-micron process technologies (12nm and below).
• Skills:
  • Analog Design Expertise: Proficient in transistor-level design, noise analysis, and power optimization.
  • Tool Proficiency: Experience with Cadence Virtuoso, Spectre, and HSPICE.
  • Digital Standard Cell Design: Experience designing digital cells balancing performance, power, and area.
• Communication: Strong collaboration skills and ability to work in cross-functional teams.

Piping Design Engineer

Salary Range: $2500 - $3500

Working Days: Mon - Fri (8:15 am–6 pm)

Office Location: Joo Koon

Responsibilities:

• Assist Project Team in execution of the project
• Collaborate with the project team to assist in the design and development of Fire Protection System & Modular Skids
• Generate and update technical documentation.
• Prepare & develop system P&ID and conceptual general arrangement drawings
• Work closely with cross-functional teams to ensure project milestones are met.
• Attend meetings on coordination & progress matters.
• Prepare drawings with AutoCAD/Solidwork
• Responsible in hydraulic calculation & reports.

Requirements:

• Candidate must possess at least a Diploma in Engineering or Equivalent
• At least 2 years of working experience in related field
• Proficient in CAD software (3D SolidWorks, AutoCAD, etc.)

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Position Overview:

We are looking for a motivated and skilled Mechanical Design Engineer to join our dynamic team. In this role, you will be responsible for designing, analysing and overseeing the structural integrity of mechanical systems and components for our products. These include specialty vehicles, engines and shelters. This role demands a strong understanding of mechanical design, vehicle systems, and relevant automotive and/or military standards, with a focus on ensuring high performance, reliability, and operational effectiveness.

Key Responsibilities:

· Develop and optimize mechanical designs for mechanical and automotive systems, focusing on efficiency, manufacturability, and sustainability.

· Collaborate with multidisciplinary teams, including electrical and software engineers, to create innovative solutions that meet customer needs.

· Utilize advanced CAD tools (such as SolidWorks) to create 3D models and detailed engineering drawings.

· Perform simulations and analysis to validate designs and ensure they meet performance and safety criteria.

· Create prototypes and conduct hands-on testing to gather data, evaluate performance, and refine designs.

· Participate in design reviews and contribute to brainstorming sessions to drive continuous improvement and innovation.

· Maintain thorough documentation of design processes, test results, and compliance with industry regulations.

· Stay updated on industry advancements and incorporate new technologies and methodologies into your work.

· Support manufacturing team with technical guidance to ensure smooth production processes and troubleshoot any design-related issues.

Qualifications:

• Bachelor’s degree in Mechanical Engineering or a related field. Master’s degree or higher qualification is a plus.
• At least 2 years of experience in mechanical design engineering, ideally within the automotive sector.
• Proficiency in 3D CAD software (e.g. SolidWorks) and familiarity with simulation tools (e.g. FEA, CFD).
• Strong knowledge of mechanical design standards, materials, and manufacturing processes.
• Excellent analytical and problem-solving skills with a focus on innovative solutions.
• Effective communication skills, both written and verbal, with the ability to collaborate in a team-oriented environment.
• Results-driven and detail-oriented mindset with a passion for engineering excellence and continuous improvement.

Preferred Skills:

• Strong communication and teamwork skills
• Experience with automotive and/or military vehicle standards and protocols
• Familiarity with vehicle system design and testing procedures.
• Knowledge of mechanical engineering principles as they apply to vehicle systems and structures.
• Experience with project management and leadership in a technical environment.

What we offer:

· Competitive salary and benefits package

· Opportunities for career advancement and professional development

· Collaborative work environment that fosters innovation and communication

· Mentorship and guidance on best practices in automotive and mechanical design

· Opportunity to work on exciting projects at the forefront of automotive technology

Seeking a meaningful design internship?

Expand Your Creative Limits with APT811: Where Design Meets Innovation

We’re seeking a design intern to join our small, lean team. Our goal is to give motivated designers the chance not just to be creative but to be strategic and thinking designers.

Needed: Basics in graphic communication design, visual hierarchy, Adobe CC (Photoshop, Illustrator, InDesign), and Figma.

This role is for those ready to integrate AI into design and work closely with our founders. It is ideal for individuals with a growth mindset looking to improve their design strategy and execution.

Our four pillars guide your growth: technical skills, strategic thinking, personal growth, and social influence. Progress through a structured path to develop your abilities.

What’s in it for you at APT811:

• Use professional AI design tools
• Create impactful designs with clarity
• Learn effective brand communication
• Strengthen your growth mindset
• Access a wealth of training resources

Work Responsibilities

As an intern at APT811, you will play a vital role in our team, contributing to various projects and honing your skills. Your responsibilities will include:

Brand Communication and Research:

• Work on brand communication touchpoints.
• Conduct research using AI tools like Custom GPT, Midjourney, and SEMrush (SEO).
• Analyse market trends and competitor strategies.

Design and Development:

• Create brand and campaign collaterals.
• Design brochures, posters, digital ads and various touchpoints.
• Ensure all designs align with brand guidelines.

Workshop Facilitation:

• Assist in planning and organising design thinking workshops.
• Support facilitators during sessions.
• Engage with participants and gather feedback.

Proposal and Presentation Support

• Help draft and design brand proposals.
• Contribute creative ideas and concepts.
• Develop visual narratives for presentations.

Continuous Learning and Application:

• Learn and apply new design software and tools.
• Participate in brainstorming sessions.
• Engage in training sessions and workshops to improve your skills.

If you have a growth mindset, like strengthening your resilience and thinking strategically, we'd like to work with you!

Apply today and do good with design together.

www.apt811.com | www.thinkroom.sg

• Position : Project Manager (Construction / Interior Design Industry) - Up to $5500
• Location : Toa Payoh Industrial (Bus stop nearby)
• Working hours : 5.5 days a week - Monday to Friday from 9am to 6pm / Sat from 9am to 1pm
• Salary (commensurate with experience) : Gross $5500 (Basic up to $5200 + $300 Transport Allowance if owns a vehicle) + Performance Bonus + 14 Days Annual leave
• Duration : Permanent
• Industry : Interior Fit-out Industry

Main Responsibilities:

• Planning/Controlling/Monitoring/Managing & Directing the assigned project resources to best meet project objective.
• Ensures all changes to specifications, work scopes, and drawings are properly documented.
• Efficient management of resources and materials
• Responsible for project and site supervision, attend site meetings, coordination with sub-contractors, suppliers, consultants and clients and all scope of work that is required in the smooth implementation of a successful project development.
• Assist in resolving any issues or challenges that may arise during the project execution.
• Conduct regular site inspections and quality control checks.
• Ensure compliance with safety regulations and industry standards.
• Collaborate with internal teams to ensure successful project delivery.
• Manage material at the construction site to ensure zero wastage and no overstock of material.
• Manage manpower and overtime costs to ensure optimal cost-benefit within or below budget.
• Coordinate and communicate with project teams, subcontractors, and suppliers.
• Ad hoc duties as assigned.

Requirements:

• Min 3 years of relevant experiences in Interior Fit-out Industry
• Minimum higher NITEC / Diploma holders or candidates with relevant experience and proven track records will also be considered.
• Experience in Construction / Interior Design/ Furniture Industry will be an added advantage.
• Able to start work within short notice preferred.

Email to: [email protected] or call me at: 6398 5689 for more information.

Like us on Facebook or Instagram (For Career tips and Job vacancies): www.facebook.com/search.personnel / https://www.instagram.com/search.personnel

Join us on Linkedin: www.linkedin.com/company/search-personnel-pte-ltd

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jane Chua

Associate Consulting Director (APAC)

License no: 13C6684

EA Personnel: R2197224

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Job Description:
We are looking for a highly skilled Physical Chip Design Engineer to lead the development of low-power and high-performance chip design processes. This is a critical role that requires deep expertise in advanced semiconductor technologies and the ability to drive full-chip physical design workflows from start to finish.

Key Responsibilities:

• Low-Power Physical Design Workflows: Lead and optimize processes to enhance energy efficiency while maintaining chip performance.
• Full-Chip Floor Planning & Place-and-Route: Oversee floor planning to ensure optimal performance, power, and area. Manage place-and-route processes for efficient, functional designs.
• Power Network Design & Analysis: Design and optimize power distribution networks, perform grid analysis to ensure power integrity and low-power design.
• Timing Closure, Power Integrity, & Signal Integrity: Resolve timing challenges, ensure power and signal integrity signoff, and perform necessary optimizations.
• Physical Verification (DRC & LVS): Conduct thorough physical verification, including Design Rule Checks (DRC) and Layout Versus Schematic (LVS) to ensure compliance with design specifications.

Qualifications:

• Education: Bachelor’s degree or higher in Electronics, Electrical Engineering, Computer Science, or related field. Advanced degrees (Master’s/Ph.D.) are a plus.
• Experience: 4-5 years of hands-on experience in physical design, with expertise in low-power, high-performance chip design. Experience with 12nm and below semiconductor technologies and tape-out processes is essential.
• Technical Skills:
  • Expertise in full-chip floor planning, place-and-route methodologies, and physical verification (including DRC and LVS).
  • In-depth knowledge of power network design, IR drop analysis, and timing closure.
  • Proficiency in Synopsys IC Compiler, Cadence Innovus, or similar tools.
  • Proficiency with Static Timing Analysis (STA) tools.
• Programming Skills: Strong scripting skills in Perl, TCL, Python, and C++.

Job Summary:

We are looking for an Architecture Design Engineer to focus on the development and optimization of AI Chip hardware systems. This highly technical role involves designing simulators, optimizing AI chips at various levels, and developing front-end code to ensure AI chip functionality and performance.

Key Responsibilities:

• Simulator Design:
  Utilize tools like GEM5 to design and develop simulators for AI chips, ensuring accuracy and efficiency in simulating chip behavior across various workloads.
• Performance Optimization:
  Optimize AI chips at:
  • Algorithm Level: Enhance computational algorithms for efficiency.
  • Architecture Level: Design and refine the overall chip structure.
  • Circuit Level: Improve low-level electrical performance.
• Front-End Code Development:
  Write, test, and optimize front-end code for AI chip functionality, ensuring compatibility with the chip’s architecture.

Qualifications:

• Educational Background:
  Minimum Bachelor's degree in Computer Science, Electronics, or a related field. Advanced degrees are a plus.
• Technical Knowledge:
  • Strong understanding of computer architecture and AI hardware accelerators (e.g., GPUs).
  • Familiarity with memory access patterns in AI models and effective memory handling.

Piping Design Engineer

Salary Range: $2500 - $3500

Working Days: Mon - Fri (8:15 am–6 pm)

Office Location: Joo Koon

Responsibilities:

• Assist Project Team in execution of the project
• Collaborate with the project team to assist in the design and development of Fire Protection System & Modular Skids
• Generate and update technical documentation.
• Prepare & develop system P&ID and conceptual general arrangement drawings
• Work closely with cross-functional teams to ensure project milestones are met.
• Attend meetings on coordination & progress matters.
• Prepare drawings with AutoCAD/Solidwork
• Responsible in hydraulic calculation & reports.

Requirements:

• Candidate must possess at least a Diploma in Engineering or Equivalent
• At least 2 years of working experience in related field
• Proficient in CAD software (3D SolidWorks, AutoCAD, etc.)

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

• Well Established Company
• Basic $5000 - $6000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: East
• Working day: Monday to Friday
• Working hours: 8.30am to 6pm

Job Responsibilities:

• To strategise, organise, govern, and manage a project within a predetermined timeframe that is committed to customer
• To successfully completely New Product Introduction (NPI) projects by meeting all the specifications and requirements and advancing them towards mass production, including anticipating and mitigating potential risks that may negatively impact the projects
• To engage and work with customers on product specifications, requirements, costs, schedules, and quality
• To generate and provide quotations for tools and moulded parts, upon receipt of Request for Quotation (RFQ)
• To collaborate internally with tool designer and engineering team on design for manufacturing (DFM) and proactively manage program documentations, technical and engineering changes
• To update the status of on-going programs to the management
• To consistently pursue for new customers
• To establish and nurture a robust and affirmative rapport with our key customers to secure new and additional projects and pursue new customers to strengthen sales pipeline
• Any ad hoc duties as assigned

Job Requirements:

• Possess minimum Diploma / Degree in Mechanical Engineering/Precision Engineering or relevant qualification with minimum 2-3 years relevant working experience
• Knowledge with practical experience in the field of plastic injection and injection tool fabrication, or mechanical product design is needed

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Responsibilities

• Coordinate with internal team in Singapore / India & liaise with customers / consultants on day to day basis
• Preparation of project documents including BQ
• Handling Design & Build projects
• Prepare optimised design solutions for projects
• Prepare Design drawings (Single Line Drawings & layout)
• Prepare design calculations incl voltage drop, short circuit current etc.
• Support multiple M&E projects concurrently
• Lead project meetings and work with team members to achieve the deliverables on-time
• Ensure drawings & documents are well maintained & stored in a timely manner
• Other adhoc duties as assigned

Requirement

• Diploma/Degree in Electrical Engineering
• Minimum 5 yrs of relevant hands-on M&E experience in construction industry and LTA projects
• Need to be familiar with Singapore codes such as SS638 (CP5), SS650, SS555 etc
• Hands-on experience in AutoCAD drawings is preferred
• Familiarity in BIM (Revit / Navisworks) is advantageous
• Having consultancy experience is preferred
• Possess effective organizational and follow-up skills, meticulous
• Good communication skills
• Good interpersonal skills and able to interface with all levels, internally and externally, in a professional and responsive manner

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

• Well Established Company
• Basic $5500 - $6000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: East
• Working day: Monday to Friday
• Working hours: 8.30am to 6pm

Job Responsibilities:

• To strategise, organise, govern, and manage a project within a predetermined timeframe that is committed to customer
• To successfully completely New Product Introduction (NPI) projects by meeting all the specifications and requirements and advancing them towards mass production, including anticipating and mitigating potential risks that may negatively impact the projects
• To engage and work with customers on product specifications, requirements, costs, schedules, and quality
• To generate and provide quotations for tools and moulded parts, upon receipt of Request for Quotation (RFQ)
• To collaborate internally with tool designer and engineering team on design for manufacturing (DFM) and proactively manage program documentations, technical and engineering changes
• To update the status of on-going programs to the management
• To consistently pursue for new customers
• To establish and nurture a robust and affirmative rapport with our key customers to secure new and additional projects and pursue new customers to strengthen sales pipeline
• Any ad hoc duties as assigned

Job Requirements:

• Possess minimum Diploma / Degree in Mechanical Engineering/Precision Engineering or relevant qualification with minimum 2-3 years relevant working experience
• Knowledge with practical experience in the field of plastic injection and injection tool fabrication, or mechanical product design is needed

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Company located at Woodlands

• Working hour: 8:30am – 5:30pm (Mon – Fri)

• Variable Bonus + Excellent Welfare

• Well Established Automation Electronics Manufacturing Company

Job Scope

• Analyze project requirements. Design, develop and test industrial robotic equipment/machine.
• Design electrical control system make electrical schematic drawings using E3 . (ePLAN knowledge will be added advantage) .
• Source and select control components and place order for the components.
• Execute control system set up, IO system, servo & step drive set up, axis tuning.
• Provide technical support on site.
• Good in documentation knowledge especially TCF.

Requirement

• Degree in Electrical Engineering / Electronics Engineering or related disciplines
• 2 to 4 years of relevant experiences and roles in Industrial Automation

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

KHOO SOT MEI (R21102604)

EA Recruitment Pte Ltd

EA License No: 21C0492

Public Relationship Executive
Working Location: Ang Mo Kio Town Council (AMKTC)
Working days: 8.30 am -6.00 pm (Mon-Fri)
Salary: $3300- $3700

Requirements:
Diploma / Degree in Mass Communications / Media / Marketing or other equivalent educational qualifications

Minimum 2 to 3 years of relevant experience
Experience in media relations and communications
Knowledge of design and editing software (i.e. Canva / Photoshop / Illustrator / InDesign / Premiere Pro / iMovie, photography and videography
Good understanding of social media platforms (Facebook, Instagram, Telegram, YouTube, etc.), media trends and current affairs
Good knowledge in sustainability & green practices is a plus

Reporting to the Public Relations Manager, your job responsibilities include but not limited to the following:
Assist in conducting market research to identify industry trends and target market characteristics.
Prepare and develop corporate materials such as management reports, daily media monitoring reports and social media analysis reports.
Assist with media plans, working closely with internal and external stakeholders. This includes active pitching to media and publications, preparation of materials including speeches, talking points, news releases, and videos.
Drive publication process from editorial planning, interviewing, writing, photo-taking to proofreading, production and management of the Town Council’s publications, working closely with internal and external stakeholders to develop engaging and public educational content to expand the reach of publications.
Manage and support on-site event activities and post-event follow-up.
Assist in planning of Corporate Social Responsibility (CSR) programmes and sustainability efforts.
Prepare write-ups for website content, estate improvement works booklet, compliments received, internal newsletters, etc.
Coordinate and facilitate the timely print, delivery and distribution of publicity collaterals such as banners and newsletters.

Chew Xing Shan Reg No: R22107044

The Supreme HR Advisory Pte Ltd EA No: 14C7279

WhatsApp: +65 83592812 [Shannon]

• Well Established Company
• Basic $5500 - $6000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: East
• Working day: Monday to Friday
• Working hours: 8.30am to 6pm

Job Responsibilities:

• To strategise, organise, govern, and manage a project within a predetermined timeframe that is committed to customer
• To successfully completely New Product Introduction (NPI) projects by meeting all the specifications and requirements and advancing them towards mass production, including anticipating and mitigating potential risks that may negatively impact the projects
• To engage and work with customers on product specifications, requirements, costs, schedules, and quality
• To generate and provide quotations for tools and moulded parts, upon receipt of Request for Quotation (RFQ)
• To collaborate internally with tool designer and engineering team on design for manufacturing (DFM) and proactively manage program documentations, technical and engineering changes
• To update the status of on-going programs to the management
• To consistently pursue for new customers
• To establish and nurture a robust and affirmative rapport with our key customers to secure new and additional projects and pursue new customers to strengthen sales pipeline
• Any ad hoc duties as assigned

Job Requirements:

• Possess minimum Diploma / Degree in Mechanical Engineering/Precision Engineering or relevant qualification with minimum 2-3 years relevant working experience
• Knowledge with practical experience in the field of plastic injection and injection tool fabrication, or mechanical product design is needed

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Permanent. 5 days. Alternate saturday 4 hr. Jurong

Our client

A very profitable decades old company specialised in machine automation, manufacturing equipment/manufacturing system design, calibration related products

Area of business: Global

Industry served: chemical, pharmaceutical, food

Abt the position:

Involved in full cycle mechanical design machine from conceptualization,designing, testing , commissioning.

Job scope:

1. Meet n discuss with client of the customized technical requirement.

2. To mechanical design n produce fabrication drawings for

(a) Material handling/ feeding / pick and place system, jigs and fixtures. (non static )

( b) Tanks and vessel design.(static)

(c )simple steel structure / process piping design

4. To perform equipment integration

5. To project manage

Requirement:

1. Diploma in Mechanical, Mechatronics Engineering or its equivalent.

2.Min 2 years experience in mechanical design manufacturing automated machine

Added advantage:

Mechanical design customized material handling equipment

whats on offer:

(1) Attractive package

(2) Stable Management

(3) Dynamic work environment

Work Location: Jurong

Please submit resumes to [email protected] with the following details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

Michelle Goh

EA License No : 22C1142

We regret that only shortlisted candidates will be notified.

About the Role:

We are seeking a highly motivated and innovative Scientist to join our team working on the development of cryogenic integrated circuits (ICs) for quantum computing and other low-temperature applications. This role presents an exciting opportunity to contribute to cutting-edge research and development in the field of cryogenics, focusing on designing and optimizing ICs that operate at cryogenic temperatures. You will be part of a dynamic team collaborating with academic institutions, industry leaders, and cross-functional teams to push the boundaries of technology in the rapidly evolving quantum computing ecosystem.

Key Responsibilities:

• Design and develop cryogenic-compatible ICs for quantum computing and quantum sensing applications.
• Characterise and optimize IC performance at ultra-low temperatures, focusing on noise reduction, power efficiency, and signal integrity.
• Collaborate with cross-disciplinary teams to integrate ICs into quantum hardware platforms, ensuring seamless operation in cryogenic environments.
• Conduct experimental tests and simulations to validate the performance of cryogenic IC designs.
• Contribute to research publications and patent filings to protect innovations and showcase technical advancements.
• Collaborate with industry stakeholders, academic institutions, and consortia to advance the state-of-the-art in cryogenic IC technologies.

Requirements:

· PhD in Electrical Engineering, or a related field with a focus on cryogenic systems, semiconductor materials, or integrated circuits.

· At least 5 years of experience in designing, testing and characterising analog/mixed-signal ICs (ADC, DAC, AFE etc). Familiar with chip-level modelling, integration and verification.

· Hands-on experience with PCB design, operating high performance test equipment, especially for high frequency and low-noise circuit design.

· Familiarity with system-level modeling and simulation, using tools like MATLAB and Python, to model and optimize cryogenic IC performance.

· Understanding of the challenges of operating electronic systems at cryogenic temperatures is a plus.

· Proven ability to design, develop, and optimize analog/mixed-signal ICs for low-temperature applications.

· Experience with system-level modeling and simulation using MATLAB/Python.

· Strong publication track record in relevant technical fields, demonstrating a history of research contributions and innovation.

· Experience working in cross-functional teams and collaborating with external partners.

Strong communication skills for presenting research findings to academic, industrial, and governmental stakeholders.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

About the Role:

We are seeking a highly motivated and innovative Scientist to join our team working on the development of cryogenic integrated circuits (ICs) for quantum computing and other low-temperature applications. This role presents an exciting opportunity to contribute to cutting-edge research and development in the field of cryogenics, focusing on designing and optimizing ICs that operate at cryogenic temperatures. You will be part of a dynamic team collaborating with academic institutions, industry leaders, and cross-functional teams to push the boundaries of technology in the rapidly evolving quantum computing ecosystem.

Key Responsibilities:

• Design and develop cryogenic-compatible ICs for quantum computing and quantum sensing applications.
• Characterise and optimize IC performance at ultra-low temperatures, focusing on noise reduction, power efficiency, and signal integrity.
• Collaborate with cross-disciplinary teams to integrate ICs into quantum hardware platforms, ensuring seamless operation in cryogenic environments.
• Conduct experimental tests and simulations to validate the performance of cryogenic IC designs.
• Contribute to research publications and patent filings to protect innovations and showcase technical advancements.
• Collaborate with industry stakeholders, academic institutions, and consortia to advance the state-of-the-art in cryogenic IC technologies.

Requirements:

· PhD in Electrical Engineering, or a related field with a focus on cryogenic systems, semiconductor materials, or integrated circuits.

· 2-5 years of experience in designing, testing and characterising analog/mixed-signal ICs (ADC, DAC, AFE etc). Familiar with chip-level modelling, integration and verification.

· Hands-on experience with PCB design, operating high performance test equipment, especially for high frequency and low-noise circuit design.

· Familiarity with system-level modeling and simulation, using tools like MATLAB and Python, to model and optimize cryogenic IC performance.

· Understanding of the challenges of operating electronic systems at cryogenic temperatures is a plus.

· Proven ability to design, develop, and optimize analog/mixed-signal ICs for low-temperature applications.

· Experience with system-level modeling and simulation using MATLAB/Python.

· Strong publication track record in relevant technical fields, demonstrating a history of research contributions and innovation.

· Experience working in cross-functional teams and collaborating with external partners.

Strong communication skills for presenting research findings to academic, industrial, and governmental stakeholders.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

• 5.5 Days (Mon- Fri 8.30am-5.30pm; Sat 8.30am – 12.30pm)
• Location: Changi Area
• $5500 to $8000 salary depending on experience & qualifications

Job Responsibilities:

• Handle overall project management, project schedule and directions for ACMV Project.
• Manage, lead, and handle a team of engineers, supervisors, WSH Coordinator and sub-contractors.
• Manage and control project budget and ensure project completion in timely manner.
• Manage and prepare monthly payment claim submission, variation order submission and extension of time submission to the Main Contractor.
• Manage and prepare sub-contractors’ payment response and variation order claim.
• Carry out site visits throughout the project to record information on the progress of the project against the agreed programme.
• Analyse and prepare the overall schedule and project execution plan.
• Mitigate site issues and propose a contingency plan.
• Liaise with the main contractor, consultant and client representative.
• Plan and allocate resources, projection and forecast of manpower.
• Ensure proper management and control of project documentation.
• Manage and lead the team for preparation, submission and obtain approval of MOS, RA, SWP, shop drawings, material, equipment, RFA, RFI etc.
• Conduct regular site meetings and attend essential meetings.
• Manage, plan, and lead the testing & commissioning of ACMV system.
• Manage, lead and handover OMM document, training, as built drawings, spare parts and DLP program.

Job Requirements:

• Must have at least a Degree in Mechanical Engineering, or Diploma in similar fields.
• Must have 15 years’ design and installation experience in ACMV and BMS System.
• Good knowledge of codes, standards, and procedures.
• Proficient in AutoCAD, Revit.

If you are interested to apply, kindly WhatsApp me your updated resume in DOC file and allow our Consultant to match you with our Clients.

Whatsapp: +65 8525 2419

Email: [email protected]

Tan Man Ee (Ashley) Reg No: R22108289

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

• Position : Outdoor Sales Executve (Interior Design/Architectures/Bathwares) - Up to Gross $5,000
• Location : Central - Henderson Road
• Working hours : Monday to Friday | 9am to 6.30pm
• Salary (commensurate with experience) : Up to $4,500 (Basic Up to $3300 + Up to 3.5% Commission) + Transport Reimbursable + Performance Bonus + Annual Leaves + Medical Benefits
• Duration : Permanent
• Industry : Premium Bathroom Accessories

Main Responsibilities:

• Supports Sales Manager in achieving monthly & annual project sales targets.
• Servicing & pitching to Singapore interior designers, architects, contractors & developers
• Canvassing & establishing new clientele base for the company

Requirements:

• Minimum of 1-2 yrs outdoor sales experience in Singapore / Malaysia
• Minimum O / A levels / Diploma.
• Excellent Interpersonal skills & packing tremendous passion in interior design & all things beautiful.
• Bilingual in English and Mandarin to communicate with Chinese clients who can only speak mandarin.

Email to: [email protected]

Do visit www.facebook.com/search.personnel for more job listings.

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

Electrical and Control Design Engineer

Working day: Monday – Friday
Working Hour: 8:30am - 6:15pm
Salary range: $3,200 - $5,800
Location: Woodlands

Key Responsibilities:

• Analyze project requirements. Design, develop and test industrial robotic equipment/machine.
• Design electrical control system make electrical schematic drawings using E3 . (ePLAN knowledge will be added advantage) .
• Source and select control components and place order for the components.
• Execute control system set up, IO system, servo & step drive set up, axis tuning.
• Provide technical support on site.
• Good in documentation knowledge especially TCF.

Requirements:

• Bachelor's Degree in Electrical and / or Electronics Engineering.
• Min 3 Years of relevant experience.
• Added advantage but not mandatory: programing skill of PLC (Beckhoff preferred), motion controllers, robots and touch panels.

The Supreme HR Advisory Pte Ltd || 14C7279

R22111009 Cheng Kai Ling

Art Teacher (Full-time / Part-time)

The HEart of our studio lies in our dedication towards delivering a holistic art programme, with a focus towards the engagement with the children and their learning experiences. The team is made up of nothing less than energetic individuals who are passionate for arts and teaching.

Heart Studio will be prioritizing applicants who have a current right to work in Singapore , and do not require Heart Studio’s sponsorship of a visa.

Main Responsibilities

- Create and conduct lessons for all curriculum and workshops according to HEart studio standards

- Teach Fine Art to children ( Sketching, painting and sculpture) in an engaging and creative manner

- Develop and prepare lessons plan and art related programs.

- Good communication skills to be able to engage and communicate effectively with parents , students and fellow teachers

- Demonstrate and assist students to use different techniques of art work aligned to their artistic abilities.

- Teach students to apply elements of design and modern principles of art

- Able to handle students of different age group

- Create a conductive environment to enhance learning

- Plan, coordinate Adhoc studio programs and events

- Effectively guide the students as per studio’s curriculum / lesson plan while tracking progress and providing timely feedback.

- Maintain studio cleanliness , housekeeping

Requirements:

• At least a Diploma/Degree in Fine Arts, Design or related fields
• 1-3 years of experience in teaching fine art to students in studio / pre school or equivalent capacity.
• Equipped with knowledge of painting and drawing
• Strong interpersonal skills and able to interact with all levels
• Enjoys working with children age 3 years to 17 years.
• Has patience and cares for children, comfortable communication with parents
• Keen for knowledge
• Strong foundation in classroom management
• Handles and communicate effectively with children and parents
• Independent, resourceful, self-motivated with initiative
• Honest, responsible and positive
• Proven track record and portfolio
• Able to work over weekends
• Competitive salary
• Part timers are welcome to apply

Working hours:

- Wed to Fri: 11am to 8.45pm

- Saturday: 9.30am to 6pm

- Sunday: 9.30am to 4.30pm

What Are We Offering :

· Competitive Salary

· On- the-job training & a great working environment.

If you are passionate about art education and possess the skills and qualities we are looking for, we would love to hear from you. This is an opportunity to be a part of an organization that values creativity, education and happiness.

Job Description

• Work on RTL to GDS, including synthesis, placement, clock tree insertion and routing.
• Responsible for GDS validation like DRC/LVS, timing closure sign-off, scan, validation etc.
• Design, implement and maintain synthesis, DFT and Static Timing Analysis scripts using best-in-class methodologies.
• Work closely with other groups like Analog Design, Systems, Applications and Production in determining architecture and specification of the products.

Job Requirements

• Bachelor/Masters Degree in Electronics/Electrical/Computer Engineering with min 1 year experience
• Good experience and knowledge in design flow from Netlist to GDS, Floor Planning, Synthesis, route , STA, CTS, RC Extraction and correlation
• Static timing analysis, power and noise analysis and back-end verification across multiple projects.
• Proficient with backend design EDA tools, Synopsys ICC2 preferred
• Successfully track records of taping out complex SOC
• Working knowledge of deep sub-micron routing issues as they relate to power and timing.
• Proficiency using Perl and TCL
• Self-motivated team worker, good verbal and written communication skills

Ethos Search Associates Pte. Ltd.

EA Licence No: 13C6655

EA Reg No: R1109557 Rose

Job Description

• Work on RTL to GDS, including synthesis, placement, clock tree insertion and routing.
• Responsible for GDS validation like DRC/LVS, timing closure sign-off, scan, validation etc.
• Design, implement and maintain synthesis, DFT and Static Timing Analysis scripts using best-in-class methodologies.
• Work closely with other groups like Analog Design, Systems, Applications and Production in determining architecture and specification of the products.

Job Requirements

• Bachelor/Masters Degree in Electronics/Electrical/Computer Engineering with min 1 year experience
• Good experience and knowledge in design flow from Netlist to GDS, Floor Planning, Synthesis, route , STA, CTS, RC Extraction and correlation
• Static timing analysis, power and noise analysis and back-end verification across multiple projects.
• Proficient with backend design EDA tools, Synopsys ICC2 preferred
• Successfully track records of taping out complex SOC
• Working knowledge of deep sub-micron routing issues as they relate to power and timing.
• Proficiency using Perl and TCL
• Self-motivated team worker, good verbal and written communication skills