Job Description:

As a Senior Design Engineer, you will report directly to the Design Manager and play a critical role in managing and executing BIM processes for ACMV/HVAC systems. You will be responsible for developing, maintaining, and overseeing accurate 3D models, ensuring alignment with project requirements, and collaborating across various disciplines to ensure seamless integration and coordination of the models. Your expertise will also be pivotal in quality control, design processes, and continuous improvement of BIM standards within the company.

Key Responsibilities:

1. BIM Modelling and Management

• Develop and maintain accurate 3D BIM models for ACMV/HVAC systems in construction projects, including components such as air handling units, ductwork, piping, and associated equipment.
• Update models to incorporate design changes and engineering solutions.
• Coordinate and collaborate with other BIM engineers from various disciplines (structural, architectural, electrical, plumbing) to integrate all models and ensure compatibility.
• Perform clash detection and resolve conflicts within the BIM environment to minimize construction issues.
• Establish and maintain project-specific BIM standards, methods, and procedures, adhering to company protocols and local Singapore BIM guidelines.
• Generate 2D drawings, schedules, and reports directly from BIM models for project documentation and construction purposes.

2. Design

• Participate in the conceptualization and detailed design of ACMV/HVAC systems, ensuring compliance with local codes, standards, and best practices, including the Singapore Code of Practice (CP13), SS553, and the Fire Code.
• Prepare design documents, including system layouts, schematics, and specifications.
• While thermal load calculations and energy modeling are not yet implemented, you will be responsible for using design software and tools to perform these tasks as needed in future projects. System sizing will be carried out as part of the current design process.
• Review and approve shop drawing submittals.

3. Coordination and Communication

• Participate in design meetings, coordination workshops, and BIM coordination meetings.
• Liaise with project managers, architects, engineers, contractors, and clients to ensure the project design and execution plan are clearly understood.
• Present BIM models to project teams, stakeholders, and clients to facilitate understanding and gather feedback.

4. Quality Assurance and Control

• Ensure quality control of BIM models and design documentation, maintaining accuracy and consistency.
• Validate model-based project deliverables for compliance with project standards and ensure the accuracy of all information.

5. Professional Development

• Stay current with the latest trends and advancements in BIM and ACMV/HVAC technologies.
• Engage in continuous learning to enhance your knowledge and expertise in design, construction, and BIM-related areas, with a career progression pathway aligned toward project management.

Preferred Experience Areas:

• Hospitals, Labs, Operating Theatres
• Commercial or Industrial Buildings (Warehouses, Factories)
• Government Projects
• Data Centers

Requirements

• Education: Degree in Mechanical Engineering or a related field. Candidates with a degree in Sustainable Infrastructure are welcome to apply. Fresh graduates are encouraged to apply.
• Experience: Must have project ACMV experience.
• Certifications: Safety certification, minimum Bizsafe Level 2. Training will be provided if not already certified.
• Skills: Proficient in English, both written and spoken.
  Strong independence and leadership in a teamwork environment.
  Knowledge in BIM is an added advantage.
  Ability to move across various local sites.
• Soft Skills: Excellent communication, collaboration, and problem-solving skills.

Advantages & Benefits:

• 5-day work week.
• Progression-centric career development.
• AWS and Variable Performance Bonus included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.
• Comprehensive medical benefits.

Job Scope:

• Design and develop mechanical systems, products, and components
• Create detailed technical drawings and specifications using CAD software (e.g., AutoCAD, SolidWorks, CATIA)
• Conduct simulations and analysis (e.g., stress, thermal, fluid dynamics) to validate designs
• Collaborate with cross-functional teams to integrate mechanical designs with other systems
• Perform design modifications and improvements based on feedback and testing results
• Develop prototypes and conduct hands-on testing to ensure design feasibility and performance
• Select materials, components, and manufacturing processes for product development
• Ensure designs comply with safety, regulatory, and industry standards
• Prepare and review technical documentation, reports, and presentations for stakeholders
• Support the manufacturing team in product assembly, testing, and troubleshooting
• Manage design projects, ensuring timelines, budgets, and quality standards are met
• Continuously research and apply new design technologies and innovations to improve mechanical systems

Requirements:

• ITE, Diploma, or Degree in Mechanical Engineering
• Minimum two years of experience in customized automation machine design
• Experience in semi-con, connector, or machine design preferred
• Knowledge of SolidWorks, with Pro-E and Inventor as added advantages
• Strong understanding of mechanical movement, function, and performance
• Good perception of 2D & 3D objects and machining processes
• Passion for designing high-performance machines

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

THE PERSON:

The ideal candidate should have a deep understanding of analog design and able to lead, attend and present at design review meetings with teams worldwide.

KEY RESPONSIBILITIES:

• Circuit design of wireline transceiver building blocks (PLL, clock distribution, receiver front-end, transmitter front-end, serializer, deserializer, etc.)
• Conduct peer reviews of circuit design and verification results
• Working with validation team to evaluate silicon results

PREFERRED EXPERIENCE:

• Extensive experience with high speed analog design with blocks like ADC, PLL, clock distribution, receiver front-end, transmitter front-end, serializer, deserializer.
• Experience with latest process technologies like 7nm or below Finfet technology.

ACADEMIC CREDENTIALS:

• Bachelors/Masters/Phd Degree in Electronic Engineering

LOCATION:

Singapore

XCL World Academy is seeking to appoint a Secondary Years Design & Technology Teacher. This is a full-time contract position commencing from 1st August 2025.

Preference will be given to teachers who have relevant subject-specific IB MYP and DP experience, as well as a clear track record of superior teaching in international school settings.

Main Responsibilities

• Teachers should be willing to contribute positively to the collaborative culture of the department and broader SY Team.
• Demonstrates to professional ethics, international mindedness and the school’s mission.
• Adheres cooperatively to XCL policies and regulations, including duties, deadlines, programme requirements (IB).
• Seeks clarification in case of lack of clarity to fully meet all expectations of the role and sets and maintains high standards of professionalism.
• Contributes to the development of curriculum and assessment documentations.
• Show exemplary attendance to work eg. recognizes the importance and provides support for XCL extended school day activities.

Person Specifications

• Undergraduate degree from a recognized university or college.
• Teaching experience and professional certification specific to applied position.
• Minimum of two years’ experience as a class teacher, preferably in an international K-12 school.
• Preferred minimum 2 years of relevant IB programme experience.
• Possess skills and attitudes aligned to the purpose, mission and vision of XCL World Academy.
• Need clear eagerness, resilience and understanding to engage and collaborate in the development of a highly aspirational school.
• Have demonstrated commitment and education and learning beyond the classroom.
• Be flexible and willing to take on new challenges.
• Salary commensurate with experience (International School) and according to the school's teaching scale.
• This is a full time 2-year contract position, renewal will be offered based on performances and class allocations.

Application:

Qualified candidates are welcome to apply by 4 January 2025.

About us

XCL World Academy is an international school in Singapore for students aged 2 to 18, fully committed to the academic, emotional and social development of its students. We are immensely proud to be the first and only international school in Singapore authorized to offer all four International Baccalaureate (IB) programmes.

We aspire to recruit employees that share and understand our commitment to empowering an international community of happy learners who aspire to positively impact others. We are committed to safeguarding and promoting the welfare of children and young people. All appointments are subject to Safer Recruitment processes such as interviews, employment reference checks, identity and criminal record checks.

About Us:
At Luxx Newhouse Group, we specialize in providing premium engineered surfaces, including sintered stones, solid surfaces, and quartz. Our commitment to excellence is reflected in our end-to-end solutions—from supply to fabrication and installation. We are a dynamic and innovative company looking to expand our team with creative minds who thrive in a fast-paced environment.

Position Overview:
We are seeking a talented and passionate Product Design & Visualisation Intern to join our team. As an intern, you will collaborate with our product design and visualisation teams to create compelling and high-quality designs that showcase our engineered surfaces. This is an excellent opportunity for someone looking to gain hands-on experience in design and 3D visualisation in a cutting-edge industry.

Key Responsibilities:

• Assist in the design and development of product concepts and visual presentations for our engineered surfaces.
• Create 3D visualisations, renderings, and prototypes using CAD software (e.g., AutoCAD, SolidWorks, Blender).
• Collaborate with the design team to refine product concepts, ensuring they align with brand standards and client requirements.
• Support the creation of marketing materials, presentations, and product brochures.
• Work on client-specific customisation projects and provide design solutions that reflect their vision.
• Assist in the preparation of mood boards, sketches, and material mock-ups for presentations and client meetings.
• Participate in product brainstorming and ideation sessions.

Qualifications:

• Currently pursuing a degree in Industrial Design, Product Design, Architecture, or a related field.
• Proficiency in 3D modelling and visualisation software (AutoCAD, Rhino, Adobe Illustrator, Adobe Photoshop, Keyshot, etc.).
• Basic understanding of design principles, material properties, and manufacturing processes.
• Strong attention to detail and a creative problem-solving approach.
• Ability to work independently and as part of a collaborative team.
• Excellent communication and time management skills.
• A portfolio showcasing relevant design work will be highly regarded.

Duration:
3-6 months (with potential for full-time employment after successful completion)

Why Join Us?

• Gain hands-on experience with cutting-edge materials and product design.
• Work in a collaborative and innovative environment.
• Opportunity to learn from industry experts and make an impact on real-world projects.

If you're ready to immerse yourself in the world of premium product design and visualisation, we'd love to hear from you!

Responsibilities:

- Create engaging social media content for our social media channels including Facebook, Instagram and TikTok

- Develop strategies for website enhancement

- Design marketing collaterals online and offline, and assist in sales team in creation of artwork for physical stores

- Collaborate with marketing team to develop marketing strategies and campaign

- Monitor and track social media metric to evaluate success of campaigns

- Stay up-to-date for social media trends

Requirements:

- Relevant diploma in Marketing/Art/Design courses' to 'Currently pursuing a Diploma in Marketing/Art/Design courses'

- Passion for marketing related design and content creation

- Proficient in graphic design software such as Adobe Photoshop, Illustrator, In-design, After Effects

- Excellent writing and communication skills

- Knowledge of digital marketing

- Positive attitude and willingness to learn

5days work week

Role Responsibilities

• Responsible for the running of small, medium and large size projects in Singapore and throughout Asia Pacific
• Undertakes a client facing role in the development, design and coordination of engineering project services for mechanical designs, installations, systems, equipment and facilities
• Actively involved in the production of drawings, calculations, schedules and specifications for all related mechanical/electrical systems
• Significant focus on the design of Mission Critical Data Centre Mechanical services including all equipment, systems and interfaces. For mechanical services including cooling, AC, ventilation, generator fuel delivery systems, associated hydraulic systems, public health & plumbing, fire protection
• Carries out feasibility, due diligence, condition/dilapidation and other types of surveys and tests on new & existing sites and facilities in respect of mechanical services
• Visits sites regularly and carries out inspections during construction stage of projects to ensure that the designs produced are realized practically and accurately
• Specifies activities to ensure that manufacturing, construction, installation, and operational testing confirm to functional specifications and customer requirements
• Day to day decision making on project progress, ongoing requirements for deliverables against detail and programme and direct liaison with and advice to clients
• Represents Company at technical meetings with clients, stake holders, professional and contractors teams
• Ensures engineering deliverables, including drawings, calculations, schedules and specifications meet required robust industry and legal standards
• Leads on the coordination of engineering services internally between MEP disciplines and externally between MEP and all other relevant designs
• Takes a holistic view in the selection and application of engineering concepts and solutions
• Based in Singapore but may be required to travel through out the region and between offices

Role Requirements

• At least 8 years overall experience with 3 years Data Centre design experience
• Broad design experience across Commercial, High Rise, Hotels & Leisure would be beneficial
• Degree or higher in appropriate engineering discipline or have sufficient equivalent experience
• Singapore Professional Engineer registration or progress towards beneficial
• Significant experience in production of drawings, calculations, schedules & specifications for a range of building types
• Sound knowledge of key Health and Safety issues and legislation including Singapore DfS
• Knowledge of MS Office applications Outlook, word, excel, PowerPoint etc
• Knowledge of AutoCAD/Revit/Hevacomp/IES/Amtec etc BIM/CAD calculation software
• Good understanding of Singapore and, preferably, Asia regional standards/Regulations/Codes
• Be a motivated, highly dependable individual
• Strong engineering fundamentals, including design principles, machine elements, materials, and fabrication methods
• Ability to prioritize own workload
• Ability to work to deadlines
• Managerial skills, projects and resources focused
• Presentation skills
• The ability to perform complex project / business case analysis to justify technical decisions and present the justification to management in a high level review

Job Description & Requirements

• Minimum Degree in Mechatronics/Computer Science or Equivalent.
• 5 years’ of experience in programming on Windows
• Proficiency with C++, VC++, MFC, SQL and OOP.
• Must have experience in Semi Equipment SECS/GEM Protocol
• Hardware experience in using Servo, Stepper Motion Controller, Analog Device and High Speed I/O.

Key Responsibilities:

• Design and develop machine control software for automated semiconductor equipment.
• Integrate Software or OEM Equipment
• Conduct Analysis, recommend changes to improve equipment performance
• Develop Control Software
• Provide Support for on-site installation

THE ROLE:

To validate and characterize the most cut edge SerDes design including PAM4 224G transceiver on the most advance technology node. Using the latest measuring equipment the semiconductor industry has to offer to benchmark AMD’s SerDes against the challenging industry standard.

THE PERSON:

We are looking for a meticulous and motivated engineer to join the validation teams.

KEY RESPONSIBILITIES:

• Post Silicon Validation of high speed SerDes
• Understand the industry requirements and specification for high speed IO
• Develop validation methodology to validate new industry standard and requirements.
• Characterize the latest SerDes design
• SerDes debug with designers on Silicon
• Tuned the latest design to performance at the most optimum setting
• Generate specification base on measured results
• Work with remote teams to co-ordinate distributed task.
• Support FAE on customer’s issues relating to high Speed Ios

PREFERRED EXPERIENCE:

• Experience in high speed IO SerDes post-silicon validation.
• In-depth knowledge of the latest industry standards such as PCIe, Display Port, JESD, SDI, OIF-CEI-11G/25G/56G/112G-VSR/SR/MR/LR, IEEE 802.3 KR/CR/CAUI/GAUI etc.
• Strong programming/scripting skills coding languages such as Python, C/C++, TCL for firmware development, test methodology development and test automation
• Extensive experience with common lab equipment, including BERT, analyzers, oscilloscopes, PNA/VNA etc
• Knowledge of SerDes general architectures and link level system analysis
• Good understanding in transmission line theory and electromagnetic theory
• Experience in system level serial link analysis and simulation, system performance optimization and standard/architecture level study using tools such as Matlab, ADS etc.

ACADEMIC CREDENTIALS:

• Bachelors/Masters degree in Electrical/Electronics Engineering

LOCATION:

Singapore

We are seeking a highly organized and experienced Interior Design Project Manager to join our team. The successful candidate will play a key role in overseeing the planning, execution, and completion of interior design projects. The Interior Design Project Manager will collaborate closely with the design team, clients, and contractors to ensure projects are delivered on time, within scope, and to the highest standards of quality.

Key Responsibilities:

Project Planning and Coordination:Develop comprehensive project plans outlining tasks, timelines, and resource requirements.

Coordinate project logistics, including scheduling, budgeting, and resource allocation.

Team Collaboration:Work closely with the interior design team to understand project requirements and provide necessary support.

Facilitate effective communication among team members, ensuring everyone is aligned with project goals.

Client Interaction:Serve as the primary point of contact for clients, maintaining regular communication to provide updates on project progress and address any concerns.

Ensure client satisfaction through proactive engagement and responsiveness.

Budget Management:Collaborate with the design team to establish project budgets and monitor expenditures.

Identify cost-saving opportunities and manage changes to scope while maintaining financial objectives.

Contractor and Vendor Management:Source, select, and manage relationships with contractors, suppliers, and vendors.

Ensure that all external partners adhere to project timelines and quality standards.

Quality Assurance:Conduct regular site visits to ensure the quality and accuracy of work being performed.

Implement and enforce design standards to uphold project integrity.

Risk Management:Identify potential risks and issues that may impact project timelines or budget.

Develop and implement mitigation strategies to address challenges proactively.

Qualifications:

Bachelor's degree in Interior Design, Project Management, or a related field.

Proven experience as a Project Manager in the interior design industry.

Strong organizational and multitasking skills.

Excellent communication and interpersonal abilities.

Proficiency in project management tools and software.

Knowledge of construction processes, materials, and interior design principles.

About the role

• Work as the Design Engineer to our LTA projects
• To review of contractor’s Design and Construction submission and comment
• To assist the SDE in the review of design submissions

Responsibilities will include:

• To attend design meeting and all other relevant meetings as and when required
• To give suggestion in construction sequence based on the design reviews
• To follow PGI on rotational basis with the SDE
• To review Shop Drawings and comment if any

About You

• At least five (5) years of relevant experience on projects similar in nature to the Works in the Civil Contract
• At least five (5) years in the design of structural and/or geotechnical works for deep excavation projects of a similar size and complexity
• Experience in working in a structural engineering team within a large multi discipline project team.
• Experience in minimum facility platform design and including the substructure, topsides and bridges.
• Ability to meet agreed deadlines
• Possess excellent interpersonal skills and ability to work as part of team.
• Familiarity of Singapore local codes & standards

• Taking the conceptual design through to implementation and handover;
• Ensure that all design is in compliance with local authorities’ code.
• Ensuring sustainability targets are incorporated into the design;
• Production of tender documentation, including project specifications and contract schedules such as Summary of Tender and Schedule of Rates;
• Progressing the design in accordance with the Design Checklist;
• Chairing sub-contractor progress meetings;
• Chairing Architectural Department Client weekly Meetings;
• Liaising with Quality Assurance / Quality Compliance engineers to ensure alignment of supervision goals with specification requirements;
• In the absence of a Lead Architect, the Senior Architect shall assume the role and responsibilities assigned to the Lead Architect position;
• Mentoring of an Architect with the intent of securing properly trained personnel to ensure the continual expansion of the company;
• Ensuring Architectural System Supervisor is provided with the current approved plans and shop drawings;
• Ensuring Architectural System Supervisor is fully briefed on the awarded scope of work, the tender technical documents and all contractual revisions to tender documentation.

Other Duties

• To promote safe working practices and to protect the health and wellbeing of Employees, Sub-contractors and customers;
• To undertake the assigned work scope in a professional and responsible manner;
• To protect the interests of the company;
• The role could vary between pricing, design, construction, commissioning, through to final acceptance;
• Ad hoc duties as determined by management.

Bayes advices leading technical businesses and progressive employers on talent acquisition, shaping perspectives and integrating recruitment expertise to fulfill critical and complex hires. If the role resonates with you and your professional experience complements the responsibilities listed, send your resume to [email protected]

Bayes Recruitment Pte Ltd
16 Collyer Quay, Singapore 049318
bayesrecruitment.com
EA License 10C5468 | EA Registration R2197948

Our website comprehensively shares our Privacy and Data Protection Policy, standards & compliance, and legal responsibilities. All personal data supplied will be treated in confidence, and as permissible by law. By submitting your resume for an application, you also consent that you may be contacted for future, or potential opportunities that may complement your expertise as applicable. You can opt out at any time by contacting our Data Protection Officer.

Senior Design Engineer work in conjunction with Clients, Consultant, Contractors and Sub-Contractors in order to oversee the design and construction of a project. Additional responsibilities include reviewing project bids, review of design drawings, checking and submission of shop drawings and arch materials for approval, and accurate representation of the best interests of the overall project is a major aspect of the coordinator's duties.

Key Accountabilities :-

• Coordination with Client, Consultant, System Wide Contractors and Architectural Sub-Contractors
• Compliance with various regulations by the government and requirements set by the client
• Review and interpret plans, provide schedules, check shop drawings and method statements, submit architectural materials for approval, provide progress report to client
• Oversee various Architectural Sub-Contractors work, highlight interfacing with various SWC, comply with schedules, meet the standards of client
• Assist consultant and client to carry out Architectural RI inspection
• To ensure all works are carried out in line with LAIO health and safety standards in order to provide high quality works in a safe and efficient manner

Requirement:-

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Architecture or equivalent
• At least 5 Year(s) of working experience in the related field is required for this position
• It is a requirement to have Civil Infrastruture and LTA MRT Project experiences
• Exposure to design and building contract
• Able to work independently with minimum supervision
• Strong interpersonal skills and ability to communicate at all levels
• Required Skill(s): MS Office, Computer Literate (Microstation, AutoCAD 2D and 3D), report writing

Role:

You are a Reckless Ericka ambassador with a passion for our products.

You are a driven individual with the ability to be hands-on, have keen eye for details and are open to giving and receiving feedback.

You will play a crucial role in being exceptionally creative and work alongside the Designer to support areas in Sourcing and Production.

Key Responsibilities(Production):

• Support logistical needs via tracking, receiving packing and unpacking of samples shipments.
• Manage production sample fitting and photoshoot samples to ensure that tasks are executed timely and accurately.
• Attend any quality complaints and feedback, investigate issues, and ensure timely responses.
• Receiving and processing Orders, new stock, replenishments, returns, damages and transfers, as well as all stock-take exercises (studio).
• Opening, conduct quality check and packing new stocks to ensure that it meets Reckless Ericka's standards and specifications.
• Investigate defect issues with Designer.
• Ensure stocks tally online and onsite.
• Ensure overall tidiness and housekeeping of stock baskets and studio sales floor.

Key Responsibilities(Designer's Assistant):

• Have a user-centric, thoughtful approach to gathering insights (through focus sessions and surveys) and solving for customer needs
• Understand our market, targeted customer personas, and good design principles through research and customer studies.
• Prepare moodboards, designs, sketches and technical packs for collection development.
• Keep all tracking systems promptly updated providing effective visibility to the Designer.

Requirements:

• Weekdays (except PH), adjustable hours as long as present during our core working hours - 8+1h between 8am to 8pm.
• Effectively bilingual in English and Mandarin (spoken).
• Experience in fashion or creative related studies.
• Have a good understanding of Reckless Ericka's creative vision and our target customers.
• Proactively acquiring knowledge regarding company general information, fashion news, new product information, customer feedback and staff communication.
• Good working knowledge of Adobe Photoshop and Illustrator.

How to Apply:
Please submit your CV, portfolio (if applicable), and a cover letter detailing your relevant experience and why you’re the perfect fit for our team.

Email to: [email protected]

Please state the positon you are applying.

We thank all applicants for their interest; however, only shortlisted candidates will be contacted.

Position Overview:

We are seeking a skilled Physical Design Engineer to join our team. As a Physical Design Engineer, you will be responsible for the entire process from RTL to GDS, ensuring the successful implementation of complex semiconductor chips. You will focus on block-level timing closure, formal checks, low power checks, power analysis, and signoff for block-level physical implementation. Your expertise in advanced process nodes, low-power design, and automotive chip physical design will contribute to the development of cutting-edge semiconductor products.

Responsibilities:

• Assist in the physical design process, overseeing RTL to GDS implementation for semiconductor chips.
• Achieve block-level timing closure by optimizing design constraints, performing timing analysis, and applying optimization techniques.
• Conduct formal checks to ensure designs meet functional and timing requirements.
• Perform low-power checks and analyze power consumption to optimize power efficiency.
• Collaborate with the design team to develop and implement UPF (Unified Power Format) for power management and control.
• Execute block-level Place and Route (APR), Static Timing Analysis (STA), Power Integrity (PI), Physical Verification (PV), and Formal Verification (FM) signoff processes.
• Utilize Synopsys and Cadence APR (Automated Routing and Place) tools for high-quality physical design.
• Develop and employ scripts in Tcl, Perl, or Python to automate design tasks and improve the design flow.

Qualification/ Requirements:

• Bachelor's/master’s degree in electrical engineering, Computer Engineering, or a related field.
• 2-4 years of experience in physical design for semiconductor chips.
• Proficiency in RTL-to-GDS flow, timing closure, low-power design, and power analysis.
• Strong understanding of UPF for power management and control.
• Experience with block-level Place and Route (APR), Static Timing Analysis (STA), Power Integrity (PI), Physical Verification (PV), and Formal Verification (FM) signoff.
• Familiarity with Synopsys and Cadence APR/Sign-off tools.
• Proficiency in scripting languages such as Tcl, Perl, or Python for automation.
• Excellent problem-solving skills and ability to work effectively in a team environment.

Job Scope:

• Lead the design and development of engineering projects, ensuring compliance with specifications and standards
• Collaborate with cross-functional teams, including manufacturing, quality assurance, and project management
• Create and review detailed design drawings and models using CAD software
• Conduct design analysis and simulations to validate performance and reliability
• Mentor and provide guidance to junior engineers and design team members
• Manage project timelines and deliverables, ensuring adherence to schedules and budgets
• Coordinate with clients and stakeholders to gather requirements and provide technical support
• Identify and troubleshoot design issues, implementing effective solutions
• Stay updated on industry trends and emerging technologies to enhance design processes
• Prepare technical documentation and reports for project milestones and reviews

Requirements:

• Degree in Mechanical or Mechatronics Engineering
• Over 5 years of experience in semiconductor equipment design
• Strong knowledge and experience in:
• Design of automation or semiconductor equipment
• High-speed pick and place mechanisms
• Familiarity with 3D Computer Aided Design software
• Ability to plan, prioritize, and coordinate projects effectively
• Self-motivated and capable of independent work, with strong communication skills
• Equipment troubleshooting skills
• Ability to produce detailed mechanical drawings and apply Geometric Dimensioning & Tolerancing knowledge

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Meet the Team

The IoT Digital team is a state-of-art IC design team focused on producing world-class Wireless MCU SoCs. The architecture specification, design, verification, and implementation of the Wireless MCU SoCs is the responsibility of the IoT Digital team. These SoCs include an embedded CPU system with analog and digital peripherals, advanced security, state-of-the-art power management, and best-in-class radios to support a wide range of wireless IoT applications and standards.

As Verification Engineer, you will be working closely with the IC Design, System, and Architecture teams to develop and execute the verification plan for the next generation of IoT chips.

Responsibilities

• Block and IP Verification
• Block-level verification to validate block performance and adherence to requirements
• Generate and execute verification plan based on specifications
• Architect and implement test benches using UVM-based constrained-random and formal methods
• Coverage definition, implementation, and analysis
• Formal Verification of mixed-signal IP integration, including real-number modeling
• SoC Integration and Verification
• Define, test and debug use cases for the SoC
• Verify and debug low-power design
• Flows and Methodology
• Improve flows and methodologies to streamline IP development and integration.

Skills You Will Need

Minimum Qualifications:

• Min. 5 years of IC design experience for senior positions. Open to junior candidates with strong foundation.
• Industry experience developing test benches and verification components with SystemVerilog and UVM is required
• Knowledge of scripting/language (Python, PERL, shell, TCL)
• Design/Verification skills such as Software/Firmware coding (C), SystemVerilog Assertion and coverage analysis, Low-power implementation (UPF), Mixed Signal Real Number Modeling (RNM, Spice)

Benefits & Perks:

You can look forward to the following benefits:

• Employee Stock Purchase Plan (ESPP)
• Insurance plans with Outpatient cover
• Flexible work policy

DUTIES & RESPONSIBILITIES

• To prepare intermediate engineering drawings, layout and equipment arrangement to support the Engineers in conducting their engineering planning, design and construction work. This includes consulting engineers on design and supporting them to and drafters in the development of engineering drawings.
• The main job challenge is to ensure design and drafting assignments are delivered to a high quality, using prevailing engineering design procedures, standards and codes.
• Maintaining Master Drawing Register.
• To ascertain that all inputs are delivered to engineering subcontractors in accordance with the MDR avoiding delay and rework.
• 3D Model Development - To maintain model accuracy.
• Perform Drafting Check - To maintain accuracy, quality, completeness & conformance for drafting and designing for the project standards.
• Project proposal document preparation - To provide technical support to project management/ proposal team.
• Design and drawing activities - To deliver the drawings by maintaining quality, complying with HSE standards and meeting the project deliverables schedule.
• Meetings Coordination - To resolve the engineering issues with help of drafting team and supervisors.
• Any other responsibilities, tasks assigned by the direct line Manager/ Management
• Any other tasks assigned by the Management.

Comply with HSE requirements:

• Environmental Aspects & Impacts Assessment.
• OHS Hazardous & Risk Assessment.
• Follow HSE Regulations.

Requirements

• Able to relocate to Dubai for Project duration, minimum 6 months.
• Diploma in Electrical or equivalent.
• Qualification from Technical Institute.
• 10 years of working experience.
• Knowledge of standard drafting techniques and design procedures.
• Intermediate Microsoft Office.
• Advanced AutoCAD.
• Basic AVEVA E3D & Electrical.
• Advanced Autodesk Navisworks Simulate.
• Advanced Autodesk Navisworks Freedom.
• Advanced Adobe PDF.
• Strong communication and interpersonal skills.
• Ability to work independently with minimal supervision.
• Capable of delivering tasks efficiently and meeting deadlines.
• Strong team collaboration skills.

Responsibility:

To resume to role of a DfSP to conduct Design for safety risk assessment as per MOM guide

Requirement:

Bachelor degree in C&S / Architecture / Mechanical engineering or relevant

Certificate in DfSP

Experienced in conducting DfS risk assessment

*WSHO qualification is not relevant and will not be considered.

We are currently working with a leading semiconductor test and measurement equipment manufacturing MNC in expanding their PCB Design team. Targeting to add 4 headcounts to the team by end of 1st quarter 2025.
Reporting to Engineering Manager, the PCB Design Engineer/Senior Engineer will be responsible for:
Responsibilities:

• Conduct physical layout of PCBs, including component placement, routing, trace length adjustments, and verification.
• Utilize electrical knowledge in high-speed design, RF, and power to meet project specifications.
• Design for manufacturability by collaborating with PCB suppliers and implementing industry best practices to minimize costs and enhance yield.
• Test new internal design tools and provide feedback to the development team.
• Establish design processes aimed at reducing cycle times, minimizing defects, and enhancing product performance.
• Develop design documentation and training materials.

Requirements:

• Minimally Bachelor’s Degree or Diploma in Electrical/Electronics Engineering with a minimum of 4 – 6years of relevant PCB design experience.
• Particularly in analog and mixed-signal applications, and collaboration with PCB fabrication houses to improve manufacturability.
• Experience with blind, buried, and micro vias is a plus.
• Familiarity with logical net listings, schematic usage, electrical and routing rule creation, and signal/power integrity optimization.
• Experience in RF, backplane, and electrical package design/routing, as well as a background in semiconductor testing or the ATE industry, is advantageous.
• Proficiency in Cadence Allegro/Valor and/or PAD Power PCB, as well as Microsoft Excel.
• Strong communication skills, a sense of responsibility, attention to detail, and a collaborative mindset.

Benefits:

• Strong company branding within top 10 list.
• Competitive salary and comprehensive employee benefits.
• Hybrid work arrangement.

Job Description

• Develop and create 2D and 3D piping layouts, plans, isometrics, ensure that piping designs are optimized for efficiency, ease of maintenance, and compliance with project and industry standards
• Create detailed piping layouts and general arrangements for the plant, ensuring that pipe routing minimizes interference with other disciplines (civil, mechanical, electrical) and optimizes space utilization
• Collaborate with stress engineers to ensure pipe routing and support arrangements can handle thermal expansion, seismic loads, and pressure differential
• Prepare detailed piping design deliverables, including pipe routing layouts, support details, isometric drawings, and bill of materials (BOM). Ensure designs comply with all relevant standards
• Collaborate with process, mechanical, civil, and electrical teams to ensure seamless integration of piping designs with other plant systems
• Work closely with the procurement team to prepare piping material specifications, liaise with suppliers for quotation and support vendor evaluations for piping components (valves, flanges, supports, etc.)
• Review piping installation drawings and provide feedback for improvement to ensure constructability
• Conduct site visits as needed to verify piping installations are in accordance with the approved designs

Requirements

• Diploma/Degree in Mechanical Engineering
• For Degree holder, minimum 5 years of experience in piping design. For Diploma holder, minimum 8 years of experience is required. For senior position, candidate must have at least 10 years of experience
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• In-depth knowledge of piping design codes and standards (ASME, ANSI, PUB regulations)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping design & drafting tools and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

Roles and responsibilities:

· To do conceptual and detailed machine design with regard to mechanical aspects;

· To prepare solid models, layouts, views and bills of materials for assigned design machine assemblies and sub-assemblies;

· To prepare final design configurations, layouts, solid models and production/engineering data;

· To assist in preparation of machine documentation, specifications, manual.

Job Requirements:

· Diploma or relevant in Mechanical Engineering;

· Will consider fresh-graduate.

· Preferably with working experience in designing automation systems , jig and fixture ,robotics and conveyor system.

· Proficiency with Solid Works is desirable;

· Ability to lead, manage project and communicate well with customers, vendors, engineers, technicians and team members.

About us

At Dyson we are encouraged to think differently, challenge convention and be unafraid to make mistakes. We’re creative, collaborative, practical and enthusiastic.

Dyson offers a unique opportunity for skilled individuals to invent, design and develop market leading products for the global market. By working in our world class research, design and development (RDD) department, these professionals have the opportunity to work alongside leading technical specialists and highly motivated creative people to create products which fulfil our vision of being truly different and better than our competitors.

About the role

• Develop innovative design solutions and solve engineering problems.
• Deliver parts to production on time, cost and to specification
• Produce functional prototype products suitable for testing, review and demonstration
• Develop detailed specifications and design requirements
• Develop tests to replicate anticipated usage and optimise products to be robust and high performing
• Perform analysis on test failures and develop efficient solutions

About you

• A degree in Mechanical Engineering discipline or equivalent with relevant professional experience
• A creative and considered approach to problem solving, following clear design processes
• 2 + years of industry experience
• Practical and methodical design development expertise through prototyping and testing
• Knowledge and understanding of a broad range of engineering and technological disciplines
• Proven examples of developing a technically challenging design
• Experience working in a 3D CAD design environment.
• The skills to communicate your ideas to others within your team
• Ability to plan, prioritise and co-ordinate your own time
• Knowledge and understanding of multiple manufacturing techniques

Dyson is an equal opportunity employer. We know that great minds don’t think alike, and it takes all kinds of minds to make our technology so unique. We welcome applications from all backgrounds and employment decisions are made without regard to race, colour, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other any other dimension of diversity.

Salary: (Junior, 2-4 yrs related experience: up to 4,000)

Time : Mon - Fri: 8.30am – 5.30pm

Location :Woodlands

JOB SCOPE (Design Engineer)

- Design, test, debug and commission the company’s product, which include jigs and fixtures, customized semi and fully automatic machines.

- Attend meetings with customers to discuss on their requirements in new projects and/or project proposals.

- Research and develop new ideas and concept to enhance company’s performance and competitiveness in the field of industrial automation.

- Procure and/or assist in the procurement of necessary items to enable the performance of above duties.

Requirements

- Minimum ITE, Diploma or Degree in Mechanical Engineering

- Minimum two years’ experience in customized Automation Machine Design.

- Experience in customized semi-con/ connector/ machine design preferred.

- Knowledge in Solidworks preferred, familiar with Pro-E and Inventor added advantage.

- Intuitive in mechanical movement, function and performance, good perception of 2D & 3D objects.

Probation period - (3 to 6 months)

Annual Wage Scheme - (Basic annual + 13th month ++)

Performance Bonus - (Depending on Sales and Nett profit)

EA License No.: 96C4864

Reg.No.: R24124620

• Design and shop drawing preparation & submission of automatic fire sprinkler systems.
• Prepare shop drawings from contractual drawing issued by main contractors’ assigned projects.
• Prepare preliminary schemes, penetration drawings as needed.
• Be able to produce pipe schedule hydraulics of his assigned project.
• Have understanding of equipment used in connection with each project.
• Prepare reports to Design Manager of deviations from original Tender drawings.
• Provide clear path of communication & coordination between his counterparts and superiors.
• Any other duties that may be assigned by the company.