Responsibilities:

• The Mixed-Signal IC (MEMS Interface) Design Engineer will be responsible for the design and development of capacitive and/or piezoelectric MEMS interface ASICs, including the required amplifiers, ADCs, filters and control logic, with characteristic high impedance inputs, ultra low power, low noise circuits etc .
• The responsibility of the Mixed-Signal IC Design Engineer includes scheduling, design, simulation and layout of mixed-signal circuit blocks, including pre- and post-silicon verification.
• It is also expected that you will conduct periodic design reviews, including with application engineers.
• It is also expected that you will support test development and product development teams in bringing projects to production.

Requirements:

• PhD/Master’s Degree in Electronics/Electrical Engineering.
• Minimum 6 years’ experience in Analog or Mixed-signal IC design.
• Very good knowledge of CMOS processes.
• Highly proficient in analog and mixed-signal IC design EDA tools.
• Experienced in analog and mixed-signal circuit designs, such as regulators, DC-DC converters, low-power, low-noise biasing circuits and amplifiers, sigma-delta modulation and ADCs, etc
• Experience in design of high resolution, low power sigma-delta modulation preferred.
• Experience in design of ultra low power ADC preferred.
• Skilled in laboratory testing of IC prototypes.
• Knowledge of Linux operating system required.
• Experience in MEMS interface ASIC design advantageous.

Responsibilities:

• Supervise the administration of tender and contract documents.
• Manage the process of quantification, subcontractor and supplier sourcing, pricing, and submission preparation.
• Coordinate negotiations and procurements of materials and equipment throughout project duration.
• Supervise the preparation of bills of quantities (BQ), variation orders, cost estimates, and oversee cost control and budgeting.
• Support the project team in drafting letters, reports, and handling correspondences.
• Fulfill other quantity surveying responsibilities as delegated by senior management.
• Assess staff competency and recommend training for quantity surveying staff as needed.
• Evaluate and analyze the company's key performance indicators, devising improvement initiatives and actions for enhancement.

Requirements:

• Minimum Diploma / Degree
• At least 5 years of relevant experience
• Prefer with architecture / interior design experience

Kindly email your resume in a comprehensive Word format to [email protected]

We regret to inform that only shortlisted candidates will be notified.

Please be informed that by applying for the advertised position, the candidate is considered to have given their consent for us to collect, utilize, or disclose their personal information for the purposes related to the services we provide.

Samuel Goh

EA License Number: 22C1430

Registration Number: R23112614

Job Description

• Industry/ Organization Type: Manufacturing/Food Production
• Position Title: Marketing & Design Coordinator (Food Products)/ Marketing Executive
• Working Location: Jurong West
• Working Hours: 5 days, Mon - Fri (8 am – 5 pm)
• Salary Package: Up to $2900 (basic) + $90 (Transport Allowance) + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Oversee brand promotional activities and manage packaging artwork edits.
• Act as an in-house designer for urgent packaging modifications and creation of new Point of Sale Materials (POSMs).
• Maintain and update website content.
• Assist in the development and planning of new products, guiding them from concept to commercialization.
• Support additional marketing activities as needed.

APPLY NOW!!!

• Minimum Diploma holder with 1-2 years of relevant experience.
• Proficiency in using Adobe Illustrator and Photoshop for designing and editing artwork and packaging.
• Experience with social media marketing is highly desirable.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69402 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

• Marine & Offshore industry
• Basic up to $7k + yearly bonus
• 5 days
• Working location: Jurong area
• Transport provided from Jurong East, CCK, Serangoon, Bishan

Responsibilities

• Electrical Design: Collaborate with cross-functional teams to define electrical system requirements, specifications, and design criteria for marine vessel propulsion and control systems.
• System Optimization and Performance Enhancement: Analyse and evaluate the performance of propulsion and control systems, identifying opportunities for optimization, efficiency improvement, and performance enhancement.
• Documentation and Reporting: Create comprehensive technical documentation, including operation manuals, maintenance guides, and as-built drawings for electrical systems.
• Regulatory Compliance and Safety: Ensure that all designed and commissioned electrical systems comply with relevant maritime regulations, industry standards, and safety guidelines.

Requirements

• Min Diploma in Electrical Engineering or related.
• Min 3 years of experience in Electrical Design in Marine/ Automation/ Automotive industry.
• Proficiency in electrical design software (e.g., AutoCAD Electrical, EPLAN) and simulation tools.
• Strong knowledge of marine electrical systems, power distribution, propulsion methods, and control strategies.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23114214 | Chloe Tan

Looking for a fun Interior Drafter to join our young and energetic environment!

Ready to bring luxury designs to another level? With our company expansion, we are looking for Interior Designers to join our family!

If you see things creatively and dare to create dreams into reality, here's where you should go.

We strongly believe on a flexible and family-like working environment.

Responsibilities:

• Develop AutoCAD and 3D visuals perspective rendering and layout plans with detailed specifications.
• Assist and work closely with inter-department teams.
• Develop and execute high-quality interior design concepts including mood boards and layout plans.
• Draft and prepare layout drawings.
• Able to manage multiple projects at one time.
• Create and upload interior walkthroughs using motion graphic software (Chinese software KuJiaLe will be a plus!).
• Collaborate with sales, contractors and project managers on projects.
• Any other ad-hoc duties assigned by the manager.

Requirements:

• Higher Nitec / Diploma in Interior Design or ID Architecture.
• Knowledge in 2D & 3D design (AutoCAD, 3Ds MAX / SketchUp Pro / Kujiale / InDesign/ Illustrator/ Photoshop) is a plus.
• Minimum 1 to 2 years of relevant experience as an Interior Designer, space planning from concept to implementation stage for residential to commercial.
• Knowledge of the design process, including M&E and detail construction / shop drawings, colour & materials, furniture and carpentry systems, specifications, and detailing will be a plus.
• Excellent interpersonal and communication skills, self-motivated, hardworking, willing to work independently and as a team.
• Able to work in a fast-paced environment and work under pressure.

Interested candidates,

What's Next?

1. Prepare a portfolio of previous works.

2. Send in your resume to [email protected].

Only shortlisted candidates will be notified.

1) RESPONSIBILITIES

- Act as the primary point of contact for DC Consultants and selected DC Key Accounts, collaborating internally to champion customers’ needs and drive outcomes.

- Create mapping for individual DC Consultant and regularly track progress.

- Actively promote Hoppecke DC solutions to increase market awareness and acceptance.

- Position Hoppecke’s DC solutions as primary offerings in DC Consultants & customers’ designs.

- Expectation to specify on design level (pre-tender).

- Provide prompt technical support to DC consultants or customers during the project process.

- Liaising with product/technical/back-office teams from factories, regional technical team.

- Work closely with the Sales Team on deal capture.

- Feedback on competitions solutions updates in the market.

- Regularly update activities via CRM platform (Sales force) to track opportunities pipeline.

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Control (Software) Design Engineer / PLC Programmer
• Working Location: Pioneer (Close to Joo Koon MRT)
• Working Hours: 5 days (Mon – Fri, 9am – 6.00pm)
• Salary Package: Up to $3,000 + AWS + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Project Management including scheduling, Budget control & other project related matters
• Responsible for hardware and software (PLC) design for customized machine / total system
• To supervise, test and commission projects both in Singapore and/or to overseas
• Project presentation & documentation
• To work with third party engagement wherever necessary for project related matters

APPLY NOW!!!

• Diploma / Degree
• Experience in project management, especially with PLC design and implementation, is preferred.
• Good organizational and communication abilities to handle diverse project aspects.
• Willingness to travel for project supervision and commissioning.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70912 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

FACULTY OPENINGS AT THE SINGAPORE INSTITUTE OF TECHNOLOGY

The Singapore Institute of Technology (SIT) is Singapore’s first University of Applied Learning, offering industry-relevant degree programmes that prepare its graduates to be work- and future-ready professionals. Its mission is to maximise the potential of its learners and to innovate with industry, through an integrated applied learning and research approach, so as to contribute to the economy and society.

The university’s unique pedagogy integrates work and study, embracing authentic learning in a real-world environment through collaborations with key strategic partners. Its focus on applied research with business impact is aimed at helping industry innovate and grow. Targeted to be ready in 2024, SIT’s centralised campus within the larger Punggol Digital District will feature a vibrant learning environment where academia and industry will be tightly integrated with the community. SIT espouses an applied learning approach and offers degrees with a strong focus on science and technology. Our faculty work closely with industry on translational research and innovation, as well as provide consultancy on solutions to industry challenges. This well-established nexus with industry endows our graduates with deep skills and work-ready training experience – attuning them to the needs and demands of the future economy.

As a young university, we encourage innovation, and seek the right candidates to join us in realising our vision. We offer competitive remuneration, generous employment benefits, access to funding to undertake research of relevance to industry, and opportunities to inspire and nurture the next generation of skilled and work-ready graduates. We currently have positions available at all levels, from Lecturer to Full Professor, in the following areas:

• Accounting: Financial Accounting
• Air Transport Management: Airlines Management, Airport Management
• Digital Communications & Integrated Media: Digital Web Analytics, Integrated Media Management, Digital Media Production
• Hospitality Business: Digital/Interactive Marketing, Data Analytics, Information Technology

Successful candidates will join the Business, Communication and Design (BCD) Cluster (one of five academic clusters in SIT) as members of a team of accomplished experts who are passionate about higher education and deeply involved in industry transformation through applied research programmes.

Faculty in the BCD Cluster undertake funded industry-relevant research, teach courses in Accounting, Air Transport Management, Digital Communications & Integrated Media, and Hospitality Business, as well as supervise industry masters and doctorate students in relevant topics. They are also provided paid leave to undertake consultancy work with industry and/or spend time attached with industry.

We will prioritise collegial and team-spirited candidates with either (a) an earned Ph.D. or equivalent from a reputable university with specialisation in any of the above-mentioned areas and some relevant work experience, or (b) extensive industry experience with demonstrated strong technical expertise in the above-mentioned areas.

(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Job Description

• Industry/ Organization Type: Manufacturing/Food Production
• Position Title: Marketing & Design Coordinator (Food Products)/ Marketing Executive
• Working Location: Jurong West
• Working Hours: 5 days, Mon - Fri (8 am – 5 pm)
• Salary Package: Up to $2900 (basic) + $90 (Transport Allowance) + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Oversee brand promotional activities and manage packaging artwork edits.
• Act as an in-house designer for urgent packaging modifications and creation of new Point of Sale Materials (POSMs).
• Maintain and update website content.
• Assist in the development and planning of new products, guiding them from concept to commercialization.
• Support additional marketing activities as needed.

APPLY NOW!!!

• Minimum Diploma holder with 1-2 years of relevant experience.
• Proficiency in using Adobe Illustrator and Photoshop for designing and editing artwork and packaging.
• Experience with social media marketing is highly desirable.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69402 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Summary:

• Location: North East
• 5 Days Work (Mon - Fri)
• Experience in Commercial / Renovation / Interior Design preferred

Job Scope:

• Ensure timely and high-quality execution of assigned projects according to specifications and client expectations.
• Manage subcontractors and suppliers to ensure on-time delivery within project budgets while maintaining quality standards.
• Develop and maintain project schedules and timelines to ensure projects are delivered punctually.
• Conduct project meetings as necessary for issue resolution and progress updates.
• Manage change requests, informing all stakeholders and mitigating any impacts on schedule and budget.
• Handle project transition periods, effectively managing client expectations.
• Supervise onsite setup to ensure adherence to quality standards, safety protocols, and timely completion as required.
• Administer Permit-To-Work processes and related documentation such as Risk Assessments and Safe Work Procedures.
• Source subcontractors, suppliers, and materials as needed for project requirements.

Job Requirements:

• Prior experience in managing interior fit-out projects, specifically in commercial office design and build will be an advantage
• Strong team player with excellent interpersonal and communication skills.
• Comfortable working dynamically in a fast-paced environment.
• Ability to manage multiple projects concurrently, depending on size and scope.
• Proficiency in Microsoft Project, Word, PowerPoint, Outlook, and Excel.

To Apply, kindly click on the "APPLY NOW" button.

We regret that only shortlisted candidates will be notified.

StaffKing Pte Ltd (20C0358) | Trance Teu (R1988522)

Location: Tuas Area (Company Transport Pick Up from Lakeside MRT)

• Prepare electrical calculations, cost estimates, and technical curves for tender submissions.
• Analyze design requirements to ensure compliance with standards.
• Collaborate with clients to gather requirements and provide technical support during the tender process.
• Coordinate with suppliers and contractors for quotes on special accessories and equipment.
• Develop electrical designs and winding Bills of Materials (BOM) for transformer manufacturing, including schematics and layout drawings.
• Conduct feasibility studies and simulations to optimize design performance.
• Support site surveys, technical meetings, and preparation of approval drawings as needed.
• Min 1 year expereince in CAD Software required

Interested applicants please send your resumes to [email protected]

Jessica Nguyen Huynh Thanh Truc

Recruiter (R23113787)

EA License No. 99C4599

We regret that only shortlisted candidates will be notified.

Senior Software Design Engineer

Job Info:

• Salary: $ 5,000 - $ 7,000 with AWS + VB + PB
• Benefits: Medical and Dental Claim
• Working Day: Monday - Friday
• Working Time: 8.30am - 5.30pm
• Location: Ang Mo Kio

Job Responsibilities

• Design and develop software for automated semiconductor process equipment.
• Enhance equipment performance through Continuous Improvement Programs (CIPs) and other development initiatives.
• Provide field support to upgrade systems and resolve customer issues.

Job Requirements:

• Minimum Degree in Electrical & Electronics Engineering, Computer Studies, or a related field.
• At least 3-5 years of experience in programming in a Windows (XP and above) environment.
• Proficiency in C++, VC++, MFC, SQL, and Object-Oriented Programming (OOP).
• Solid experience in developing multi-threaded control software and familiarity with SEMI SECS/GEM equipment connectivity standards and the Software Development Life Cycle.
• Hardware experience with Servo, Stepper Motion Controller, Analog Devices, and High-Speed I/O.
• Knowledge of PLC is an added advantage.
• Strong analytical and problem-solving skills.

How to apply:

By submitting any application or resume to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

We regret only shortlisted candidates will be notified.

Kok Jean Ray
Registration Number: R22110935
EA Licence No: 16C8004 (Elitez Pte Ltd)

The Opportunity:

• Our Client, Government-Operated Management
• Location: Changi
• Basic Salary: Up to $3,800
• Working hours: Monday – Friday, 8.30am – 6pm

Job Responsibilities:

• Collaborate with consultants, contractors, and stakeholders to ensure smooth project execution.
• Attend project and site meetings, providing regular updates and reports.
• Monitor project timelines and oversee the progress of consultants and contractors.
• Ensure compliance by liaising with building management for necessary approvals.
• Prepare and deliver presentations and project-related documentation.
• Ad-hoc night work and on-site presence during construction phases.
• Prepare contract documents and review materials.

Job Requirements:

• Proficiency in AutoCAD is a plus!
• Proven experience in project coordination or management
• Strong communication and stakeholder management skills
• Ability to monitor timelines and manage multiple tasks effectively
• Knowledge of building management processes and compliance
• Willingness to work night shifts and visit construction sites as required
• Experience with contract preparation and project documentation

Next Step:

• Prepare your updated resume and click to apply!
• All shortlisted candidates will be contacted.

Jason Ng
Direct Line: 6697 7967
EA License No: 91C2918
Personnel Registration Number: R23113333

Senior Design Engineer

5 days
9am-6pm
25 Kallang Ave, Singapore 339416
Up to $7000

Responsibilities:

• Define requirements and features for semiconductor equipment
• Develop concepts and architecture of new equipment
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps and valves.
• Produce detailed engineering drawings
• Perform design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Improve design of legacy machines
• Application of analysis tools like Fish Bone Diagram, FMEA etc.

Requirements:

• Degree in Mechanical or Mechatronics Engineering
• More than 5 years of experience in semiconductor equipment design
• Good knowledge and experience in the following areas :
  1) Design of automation or semiconductor equipment
  2) High precision machine design
  3) Design of High Speed Pick and Place mechanisms
• Familiar with 3D CAD software
• Ability to plan, prioritize, and coordinate throughout the project cycle
• Equipment troubleshooting skills
• Ability to produce detailed Mechanical drawings and apply knowledge of Geometric Dimensioning & Tolerancing.

Tan Jia Jun | REG No: R23112681
The Supreme HR Advisory Pte Ltd | EA No: 14C7279

Bayes is representing a European Facade-Major on key hires as they scale-up their business across South-East Asia. We are presently seeking a Facade Design Manager as part of their hiring plans.

• Develop and deliver comprehensive technical presentations on façade performance during the concept stage.
• Support the preparation of detailed façade tender packages, ensuring accuracy and completeness.
• Demonstrate a solid understanding of design principles across a variety of materials and systems.
• Lead internal drafting teams to enhance productivity and technical expertise, including reviewing shop drawings and cutting lists.
• Identify and resolve unforeseen interface issues during different phases of design.
• Provide strong leadership by professionally managing team members, assigning tasks, and offering guidance to improve drafting efficiency.
• Oversee drawing submissions, ensuring adherence to tight schedules and timely delivery in line with agreed project timelines.

Requirements:

• Minimum 4-7 years of relevant experience in Facade Design Engineering for Facade/Building-Systems industry
• Local construction knowledge and authority-submission standards/requirements
• Ability to independently provide advisory, design management and construction-management for Facade-related responsibilities

Bayes provides career opportunities with reputable and progressive Employers and prioritizes the interests of all whom we represent. If the role resonates with you and your professional experience complements the responsibilities listed, send your resume to [email protected]

All personal data supplied will be treated in confidence, and as permitted by law. For further enquiries, please visit our website which shares our Privacy and Data Protection Policy.

Dickson KOH | Managing Partner
Head, Infrastructures Practice
EA Registration R1103367

Job Summary

The job holder (2 years contract) reports to Director CDLT and is part of the management team that evaluates emerging pedagogy and technology related to education including implementing viable technological tools to enhance teaching and learning.

The job holder will work closely with both internal and external stakeholders to ensure that the curriculum and content development are developed successfully, and any learning technology adopted are with continuity through the provision of training, and the creation of self-help resources for users to enhance learning and good learner academic performance.

The job holder is expected to work from 8.30 am to 6.00 pm on weekdays and may be required to work over the weekends and Public Holidays to support MENDAKI’s events. Although the job holder is largely expected to work in an indoor environment, he is also expected to travel frequently for meetings.

Key Responsibility Areas

Curriculum Development

• Design and manage development of innovative, outcome-focused curriculum materials aligned with educational objectives and industry standards.
• Collaborate with subject matter experts to ensure curriculum content is current, engaging, and pedagogically sound.
• Recommend and integrate the learning technologies, including Learning Management Systems (“LMS”) and other educational tools, to enhance curriculum delivery and students’ engagement.
• Manage all instructional designs, employing evidence-based practices to create effective learning experiences.
• Manage the development of multi-media elements, including graphics, videos, and interactive components, to enhance instructional content with graphic and video developer.
• Stay abreast of emerging technologies and trends in educational technology to inform strategic decision-making and evaluate the pedagogical affordances.
• Manage storyboards and prototypes to outline the flow and structure of instructional content.
• Ensure curriculum designs are based on feedback and usability testing to enhance the learning experience.
• Make data-driven decisions to continuously improve curriculum content and delivery methods.
• Check that all multi-media elements are integrated seamlessly into the overall instructional design.
• Collaborate with cross-functional teams, including educators, technologists, and administrators, to ensure seamless integration of technology into the curriculum.

b. Curriculum Review & Evaluation

• Establish and enforce quality assurance processes for curriculum and instructional design, ensuring a high standard of excellence in educational content.
• Manage needs assessments to identify gaps in knowledge and skills and determine the most effective instructional strategies to address them.
• Conduct regular assessments and evaluations to measure the effectiveness of instructional materials and technology tools.
• Ensure that curriculum materials and learning technologies comply with relevant educational standards, regulations, and accreditation requirements.
• Collaborate with stakeholders to gather input and feedback for continuous improvement.
• Utilise data analytics to assess the impact of curriculum and learning technology on students’ learning outcomes.

c. Competency Development

• Develop and implement professional development programmes for educators and instructional designers, focusing on the effective use of learning technologies and best practices in instructional design.
• Communicate effectively with stakeholders, providing updates on curriculum development and learning technology initiatives.
• Conduct training sessions for educators and administrators on the effective use of learning technologies and newly developed curriculum materials.
• Mentor and guide instructional designers in the development of engaging and interactive instructional content.
• Participate in or lead special projects as required.

d. Team Management

• Effectively lead,motivate, and managethe staff underhis charge and foster a positive work environment.
• Delegate responsibilities, set performance indicators, and conduct performance evaluations to ensure the Team's success in meeting organisational objectives.
• Manage the budget for curriculum development and learning technology initiatives, optimising resources for maximum impact.

Requirements

• 8 - 10 years of related curriculum development, instructional design and learning development experience as well as learning technology.
• Experience with LMS and tools for learning (e.g.Articulate 360, Google Suite).
• Preferably had a master’s degree in MA (Instructional Design & Technology) or MEd (Learning Sciences & Technologies) or equivalent.
• Good understanding of youth, educationand working landscapes.
• Proficient knowledge of instructional design and current learning pedagogies and technologies.
• Strong interpersonal skills and the ability to manage stakeholders across different levels.
• Effective persuasive communication.
• Team leadership skills.
• Sound decision-making and problem-solving skills.
• Ability to multi-task.
• Strong projectmanagement skills.

Job Description

• Oversee in-house engineering design works of Fire Protection (Sprinkler, Hose Reel, Fire Hydrant, Dry Riser, etc) and Plumbing and Sanitary system, including detailed design, hydraulic calculation, shop drawings, pipe sizing, equipment selection, etc.
• Manage Fire Protection & Plumbing design coordination with other trades with BIM coordination.
• Liaise with Fire Protection & Plumbing suppliers for quotation, responsible for equipment selection, technical and commercial evaluation.
• Responsible for material submittals for Fire Protection & Plumbing system to the Consultant for approval.
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all equipment and materials.
• Attending technical coordination meetings with Main-con, Consultants and Employer.
• Assist Project Manager and site personnel in planning, execution, and completion of projects.
• Liaise and work closely with the Consultant, Employer, site supervisor and workers on the progress of M&E work to meet the project schedule.
• Assist in the preparation of progress payment claims and variation orders as required
• Prepare documentation and carry out testing and commissioning, combined services testing for TOP/CSC.
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards.
• Participate in tender preparation works for new projects.

Requirements

• Minimum bachelor’s degree in mechanical engineering
• Min 5 years Singapore-based FP & Plumbing experiences in Construction Industry.
• Proficient in AutoCAD and Revit.
• Experience and relevant knowledge in FP & Plumbing calculations including pump sizing, hydraulic calculation, tank sizing and more.
• Experience of design and coordination skill.
• Familiar to fire code requirement with knowledge of basic design and necessary submission for tender bidding and construction, TOP and CSC.
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges.
• Experience in Consultant Company preferred.
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

FACULTY OPENINGS AT THE SINGAPORE INSTITUTE OF TECHNOLOGY

The Singapore Institute of Technology (SIT) is Singapore’s first University of Applied Learning, offering industry-relevant degree programmes that prepare its graduates to be work- and future-ready professionals. Its mission is to maximise the potential of its learners and to innovate with industry, through an integrated applied learning and research approach, so as to contribute to the economy and society.

The university’s unique pedagogy integrates work and study, embracing authentic learning in a real-world environment through collaborations with key strategic partners. Its focus on applied research with business impact is aimed at helping industry innovate and grow. Targeted to be ready in 2024, SIT’s centralised campus within the larger Punggol Digital District will feature a vibrant learning environment where academia and industry will be tightly integrated with the community. SIT espouses an applied learning approach and offers degrees with a strong focus on science and technology. Our faculty work closely with industry on translational research and innovation, as well as provide consultancy on solutions to industry challenges. This well-established nexus with industry endows our graduates with deep skills and work-ready training experience – attuning them to the needs and demands of the future economy.

As a young university, we encourage innovation, and seek the right candidates to join us in realising our vision. We offer competitive remuneration, generous employment benefits, access to funding to undertake research of relevance to industry, and opportunities to inspire and nurture the next generation of skilled and work-ready graduates. We currently have positions available at all levels, from Lecturer to Full Professor, in the following areas:

• Accounting: Financial Accounting
• Air Transport Management: Airlines Management, Airport Management
• Digital Communications & Integrated Media: Digital Web Analytics, Integrated Media Management, Digital Media Production
• Hospitality Business: Digital/Interactive Marketing, Data Analytics, Information Technology

Successful candidates will join the Business, Communication and Design (BCD) Cluster (one of five academic clusters in SIT) as members of a team of accomplished experts who are passionate about higher education and deeply involved in industry transformation through applied research programmes.

Faculty in the BCD Cluster undertake funded industry-relevant research, teach courses in Accounting, Air Transport Management, Digital Communications & Integrated Media, and Hospitality Business, as well as supervise industry masters and doctorate students in relevant topics. They are also provided paid leave to undertake consultancy work with industry and/or spend time attached with industry.

We will prioritise collegial and team-spirited candidates with either (a) an earned Ph.D. or equivalent from a reputable university with specialisation in any of the above-mentioned areas and some relevant work experience, or (b) extensive industry experience with demonstrated strong technical expertise in the above-mentioned areas.

Regional Operation Manager

• Working Days: 5 Day Work Week including weekends
• Working Hours: 10am - 6pm / 10am - 8pm
• Location: Orchard (Paragon)
• Salary: $6,000-$8,000 + overriding commission

Requirements:

• Knowledgeable in various business processes (finance, HR, procurement, operations, etc.).

• 3-5 years of retail experience with a strong background in planning and budgeting.

• Minimum 2 years of team management experience.

• Bachelor’s degree in Business Management or related field.

Jobs Scope:

• Ensure the smooth daily operations of our stores, aligning with our company's vision and mission.

• Expand brand awareness and sales channels in both B2B and B2B2C segments. • Design and execute growth strategies for the next 1-10 years, evaluating financial performance regularly.

• Devise plans for team execution, set policies, and maintain yearly budgets and expenses.

• Optimize employee productivity and professional development, including leadership hires at the front of the house.

• Collaborate with cross-functional teams to outperform in merchandise performance, visual display, sales, and pipeline management.

• Lead discussions with the finance team to ensure business profitability and effective cash flow management.

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

Job Description

• Industry/ Organization Type: System Integration
• Position Title: Electrical Engineer
• Working Location: West (Nearest MRT: Tuas Link) – take 6 bus stops to reach the company
• Working Hours: 5 days (Monday to Friday: 9 am-6 pm)
• Salary Package: Up to SGD 4000 + AWS + Variable bonus
• Duration: Permanent

Key Responsibilities

• Design and prepare electrical drawings for control panels
• Sizing of cables, CB, and other components for control panels
• Instructing technicians on assembling control panels
• Supervising and instructing technicians during offsite maintenance or repairs of control panels
• Able to troubleshoot and repair electrical faults in control systems
• Program and configure VFD, temperature controller, and other devices
• Managing and organizing the equipment and inventory on the shop floor

APPLY NOW!!!

• Min. Diploma in Electrical Engineer
• Min. 3 years of working experience in the related field, especially experience with designing and preparing electrical drawings for control panels
• Possess technical skills and knowledge of Transformers, Motors, Motor Starters, Testing and Commissioning
• Familiar with AutoCad
• Knowledge of PLC programs (ABB) will be a plus

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67518 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Responsibilities:

• Lead the design and development of web interfaces, ensuring user-friendly, visually appealing, and functional layouts.
• Collaborate with product managers, UX designers, and developers to define project goals and requirements.
• Create wireframes, prototypes, and high-fidelity mockups to communicate design concepts.
• Implement designs using HTML, CSS, JavaScript, and front-end frameworks (e.g., React, Vue).
• Ensure cross-browser compatibility, responsiveness, and accessibility of web applications.
• Optimize websites for maximum speed and scalability.
• Maintain consistent visual design patterns across projects and ensure brand standards are met.
• Troubleshoot and resolve UI-related issues during development and post-launch.
• Mentor junior designers and developers, providing guidance on design and development techniques.

Requirements:

• A graduate in Web Design, Computer Science, or a related field (or equivalent experience).
• Experience in UI design and front-end development.
• Proficient in HTML5, CSS3, JavaScript, and front-end frameworks like React, Vue, or Angular.
• Strong experience with design tools like Figma, Adobe XD, Sketch, or similar.
• Solid understanding of UI/UX principles, responsive design, and web accessibility standards.
• Ability to translate complex ideas into clear, user-friendly designs.
• Experience with version control (Git) and modern web development practices.
• Strong attention to detail, creativity, and problem-solving skills.
• Excellent communication and collaboration skills.

(EA Reg No: 20C0312)

Please email a copy of your detailed resume to [email protected] for immediate processing.

Only shortlisted candidates will be notified.

Pathlight School is the first autism-focused school in Singapore to offer the national curriculum together with life readiness skills. It caters to students on the autism spectrum with related conditions, aged 7 to 18 years, who are cognitively able to access national curriculum but require additional support such as smaller class sizes, special accommodations and teaching staff trained in autism.

We are looking for a creative and detail-oriented HR Intern to support our team in delivering impactful and engaging HR initiatives. This internship provides hands-on exposure to HR functions with a focus on recruitment marketing, branding, and communication. You’ll have the opportunity to conceptualize and design key HR materials, work on strategic themes, and contribute to enhancing the organization's HR branding efforts.

As a HR Intern, your impact and contribution include:

Staff Handbook Development

• Design and structure the organization's staff handbook.
• Research and incorporate HR best practices to ensure the handbook is clear, professional, and user-friendly.
• Ensure alignment with the organization’s policies, values, and branding guidelines.

Recruitment Collaterals

• Conceptualize and design creative recruitment materials, including standees, gifts, and digital/print assets.
• Partner with external vendors to produce quality collaterals on schedule.
• Work closely with our Communications and HR team to ensure branding consistency across all materials.

Annual Recruitment Theme Conceptualization

• Assist in developing the overarching recruitment theme for the year, ensuring it aligns with the organization's goals and values.
• Brainstorm and present creative ideas for campaigns and initiatives to attract top talent.

Presentation and Document Design

• Design visually appealing PowerPoint slides and documents for external presentations, such as recruitment fairs or outreach events.
• Ensure all materials are polished and professional, with a focus on engaging prospective candidates.
  

Requirements

• Min. Diploma in Communications, Marketing, Design, or related fields.
• Proficiency in design tools such as Canva or similar software.
• Strong written and visual communication skills.
• Creative thinker with a keen eye for detail and aesthetics.
• Ability to work collaboratively and manage deadlines effectively.

Duration & Commitment: 3 to 5 months, from January to May 2025.

Opportunity to extend the internship based on performance and organizational needs.

Benefits
We offer a competitive remuneration package and the professional advantages of a dynamic workplace that enables your professional development and values your contributions.

We seek your understanding that only shortlisted candidates will be notified.

Our organisation is committed to protecting our children and young people from harm. We require all applicants to undergo a comprehensive screening process prior to hire.

Our client seeks a Director to join their team in HK that has experience in Hospitality.

Great global company, good opportunities for growth.

• Stable company that is continually growing their portfolio
• Manage a team, have experience from the Hospitality field

One of our Global Clients is now looking for Director of Interior Design to join their team, you will be leading Deisgners to work on current and upcoming projects for the entire Group.

Responsibilities

• Strong blend of creativity, leadership, and project management skills to deliver exceptional design solutions across various projects, from concept to execution.
• Manage the teams of design consultants to deliver outstanding designs for key renovation projects.
• Lead the design process from initial concept through to completed projects, ensuring designs meet client requirements and brand standards.
• Ensure all design work meets the company’s quality standards and complies with relevant regulations and codes.
  

Requirements

• Demonstrated success in Casino Design is required, ideally with major interior design firms, consultancies, or a related in house company.
• Strong organizational skills with the ability to manage details from inception to completion.
• Ability to work effectively with all stakeholders, possessing strong interpersonal skills to engage with senior management confidently while being a proactive self-starter.
• Exceptional leadership qualities, charisma, and communication skills to influence, inspire, and rally key stakeholders around a unified vision.
• Strong creative problem-solving abilities, with the capacity to thrive in fast-paced, dynamic environments while meeting deadlines.
• Comprehensive understanding of all aspects of hospitality interior design, including space planning, FF&E, design materials, design processes, and team structures.
• Bachelor’s degree in Interior Design, Architecture or related field, possessing a Masters will be an advantage.
  This position is based in Hong Kong, visas can be provided to candidates that meet the requirements.

For more information about this role please contact Alex Beattie at +852 3892 2368 or Email [email protected].

Data collected will be used for recruitment purposes only. Personal data provided by job applicants will be used strictly in accordance with the Personal Data (Privacy) Ordinance. We regret that only the shortlisted candidates will be notified.