Our client is a global leader in semiconductor inspection solutions.

• Identify requirements and features for semiconductor equipment and create concepts and architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Responsible for design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Create a detailed Mechanical drawing and apply analysis tools like Fish Bone Diagram and FMEA.

Requirements:

• Degree in Mechanical Engineering or equivalent
• At least 5 years of experience in Die Sorter.
• Familiar with 3D CAD software.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 3 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.
• Candidates with no prior working experience are welcome to apply.

(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Our client is a prominent construction firm in Singapore, offering comprehensive and integrated services within the construction sector.

• Coordinate design drawings with consultants to adhere with requirements of the authorities.
• Review and give solutions to technical problems and plan, monitor and report shop drawing production progress.
• Handle technical submissions for materials, construction methods and C&S shop drawings.

Requirements:

• Professional Engineer Registered with the PE Board.
• Degree in Civil Engineering or equivalent.
• At least 3 years of design working experience with main contractors.
• Familiar in British and Singapore Design Standards.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Roles & Responsibilities

• Coordinate and oversee the design of electrical and mechanical systems for LTA infrastructure projects
• Ensure that E&M designs comply with local regulations, LTA standards, and project specifications.
• Collaborate with engineers, consultants, and contractors to ensure smooth integration of E&M systems with other project elements (civil, structural, and architectural).
• Conduct design reviews, ensuring alignment with project requirements and resolving any discrepancies or technical challenges.
• Liaise with LTA representatives and ensure design submissions are timely and meet LTA’s approval process.
• Manage and track the progress of E&M design deliverables to ensure timely completion.
• Assist in resolving on-site technical issues related to E&M systems and provide design clarification to construction teams.
• Ensure that safety and quality standards are upheld in all E&M design implementations.
• Prepare regular reports on the progress of E&M designs and updates for the project management team.

Job Requirements

• Bachelor’s degree in Electrical Engineering, Mechanical Engineering, or a related field.
• 5–8 years of experience in E&M design coordination, particularly in infrastructure or transport-related projects.
• Experience working on LTA projects or other government-regulated transport infrastructure projects is highly desirable.
• Proven track record in managing the design and installation of electrical and mechanical systems.

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 8 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-Level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 5 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Job Responsibilities:

• Manage assigned projects to ensure quality and on-time execution to the project’s specifications and client’s expectations.
• Manage sub-contractors and suppliers to ensure quality and on-time delivery within project costs.
• Prepare project schedule/timeline and manage deadlines for the delivery of projects on time.
• Conduct project meetings as and when required, eg. for issues resolution and updates.
• Facilitate change requests to ensure that all parties are informed and manage any impact on schedule and budget.
• Managing client’s expectations during the project transition period.
• Oversee onsite setup work to check on quality delivery, safe work procedures and on-time completion, when required.
• Apply Permit To Work with supporting WSH documentation (Risk Assessment, Methods Statement, Safe Work Procedures) and any project-related admin work when required.
• Source for sub-contractors, suppliers and production material, when required.

Job Requirements:

• With 2 - 4 of working experience in managing interior fit out project in commercial office design & build
• Excellent communication skills
• Dynamic and comfortable working in a fast-paced environment.
• Comfortable in running a few projects in parallel (depending on the size of projects).

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

Working day: Monday - Friday
Working Hour: 830am - 6:15pm
Salary range: $4,000 - $6,000 (depend on experience)
Location: Woodlands Ave 9

Responsibilities:

As a Senior Mechanical Design Engineer, you'll play a crucial role in our team, leading the design and development of our products from concept to production. Your focus will be on driving innovation, ensuring our products meet the highest standards of quality, performance, and reliability. You will collaborate closely with cross-functional teams, playing a key role within the team.

Job Responsibilities:

• Analyze project requirements and develop innovative solutions to meet customer needs.
• Design high precision and high-tech automation equipment, ensuring that it meets performance, quality, and reliability standards.
• Select components such as servo axes and robots based on project requirements.
• Coordinate with fabrication houses and component suppliers to ensure timely delivery of parts and components.
• Guide assembly technicians in building and testing the equipment, ensuring that it meets design specifications and performance requirements.
• Conduct design reviews and provide feedback to ensure continuous improvement of our products.
• Stay up to date with the latest developments in mechanical engineering and automation technology.
• Other duties as assigned.

Job Requirement

• Bachelor’s degree / Diploma in Mechanical Engineering / Mechatronics or related field preferred.
• Min 6 years of relevant experience in automation equipment design.
• Knowledge and experience in factory automation is an advantage.
• Experience in electrical, pneumatic, and sensor component selections.
• Proficient in SolidWorks 3D software.
• Strong understanding of mechanical engineering principles, materials, and manufacturing processes

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

Location: Paragon, Orchard

Working Days: 5-day work week, full time employment

Working Hours: 10.45am – 9pm

Salary: $2,400- $3,500

The Role:

We are looking for an in-house jewellery designer. You will be working directly with the customers and to create bespoke designs. This role is multi-faceted and you would be also operating as a sales executive when clients are in the boutique. When you are with clients, you are expected to provide them with product knowledge and effectively sell both the brand and product. You will be required to share brand history, product knowledge and the highest level of customer service with all potential customers. As a designer, you need to be able to discuss a range of design options and formulate creative original ideas. You would be required to sketch out ideas and designs, sometime using computer-aided design (CAD), to help the client visualize the final design.

Skills:

Formal training in Jewellery Design

• Drawing and computer design skills to produce designs
• Work with deadlines
• Commercial awareness and practical knowledge when designing

Requirements:

• Basic I.T. skills are necessary, knowledge of MS Excel and Word
• Advanced skills in PhotoShop, Illustrator
• Able to commit to retail hours including weekends and public holidays

Chin See Min Reg No. : R22107450

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

Job Description

• Industry/ Organization Type: Marine/ Oil & Gas
• Position Title: Design Engineer
• Working Location: Loyang (Transport provided)
• Working Hours: Monday to Friday, 9 am – 6 pm
• Salary Package: Up to $4,200 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Ensure that engineering designs meet project-specific requirements, adhere to Engineering Standard Practices, and align with the company's ISO procedures, as well as national and international engineering norms, codes, and safety standards.
• Create essential documents and drawings, including block diagrams, bills of materials, functional design specifications, design calculations, wiring diagrams, and other necessary documentation. These ensure that equipment can be procured, integrated, tested, installed, and delivered to the customer on schedule.
• Verify that equipment provided for specific projects meets relevant specifications, complies with project technical standards, is correctly configured, and is fully completed.
• Ensure that the specified and designed equipment can be effectively integrated with other systems and equipment with which it interfaces.
• Develop test procedures suitable for project commissioning and provide technical support to the system assembly and integration team.
• Carry out other tasks as assigned by the Projects & Retrofit Manager or Assistant Manager.

APPLY NOW!!!

• At least a Diploma in IT or Engineering with minimum 2 years of related working experience.
• Proficient with AutoCAD and MS Office.
• Proficiency in one or more of the following systems:

1. LAN & IP Telephony: Experience in voice/data network design, implementation, and deployment; familiar with Juniper, Cisco, and HP Procurve switches and routers.
2. Radio Communication: Expertise in HF/VHF/UHF/Microwave/VSAT systems; capable of frequency interference analysis and radio coverage analysis; familiar with analogue/digital radio systems and trunked radio systems.
3. PAGA System: Experience in PAGA system design and sound coverage analysis simulation.
4. Security Systems (CCTV & Access Control): Experience with analogue/IP CCTV and access control systems; familiarity with Pelco, Bosch, Synetic, GE, LENEL, Bosch systems; PLC system experience is a plus.
5. Navigation Systems: Knowledge of Aeronautical VHF Radio, Meteorological Monitoring, Non-Directional Beacons, Marine Radar, GMDSS, Gyrocompass, and Navigation Aids.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68836 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

We are seeking a highly skilled and 10+ Years of experienced OTM & Solution Design/Architect to join our dynamic team.

• Experience in Customer Handling.
• Hands on experience in OTM Functional Configurations in the following Modules (not limited) – Order Management, Shipment Management, execution and visibility, Finance, GTM, FTI and other modules.
• Expert in OTM core modules and over all understanding of OTM Technical Architecture
• Hands on experience in log files, Automation agent actions, procedure, packages, custom event, report configuration/registration and FTI
• Experience in OTM Customizations and Integrations with Oracle, SAP & legacy Applications
• Experience in fine-tuning and optimizing OTM configurations including Agents, saved queries/conditions.

Job Description

• Industry/Organization Type: Land and Offshore Engineering Solutions Provider
• Position Title: Design Engineer
• Working Location: Gul Circle
• Working Hours: Monday – Friday, 8 am – 5 pm
• Salary Package: Up to $3,500 + OT + VB
• Duration: Permanent

Key Responsibilities

• Develop engineering solutions that optimize both the technical and quality aspects for customers.
• Design products that meet specific customer requirements.
• Prepare and maintain comprehensive technical specifications, as well as operating and maintenance procedures.
• Develop and implement new product testing and acceptance procedures.
• Conduct in-plant equipment tests on newly designed products to ensure functionality and compliance.
• Actively participate in customer consultations, project discussions, and design review meetings relevant to assigned projects.
• Perform detailed engineering tasks and create/review production drawings to ensure accuracy and adherence to specifications.

APPLY NOW!!!

• A Degree in Mechanical Engineering or a related field.
• Proficiency in SolidWorks software is highly beneficial.
• Previous work experience in oilfield equipment design is considered an advantage.
• Entry-level candidates with a keen interest in design and a strong academic background are welcome to apply.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #68845 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Location: Paragon, Orchard

Working Days: 5-day work week, full time employment

Working Hours: 10.45am – 9pm

Salary: $2,400- $3,500

The Role:

We are looking for an in-house jewellery designer. You will be working directly with the customers and to create bespoke designs. This role is multi-faceted and you would be also operating as a sales executive when clients are in the boutique. When you are with clients, you are expected to provide them with product knowledge and effectively sell both the brand and product. You will be required to share brand history, product knowledge and the highest level of customer service with all potential customers. As a designer, you need to be able to discuss a range of design options and formulate creative original ideas. You would be required to sketch out ideas and designs, sometime using computer-aided design (CAD), to help the client visualize the final design.

Skills:

• Formal training in Jewellery Design
• Drawing and computer design skills to produce designs
• Work with deadlines
• Commercial awareness and practical knowledge when designing

Requirements:

• Basic I.T. skills are necessary, knowledge of MS Excel and Word
• Advanced skills in PhotoShop, Illustrator
• Able to commit to retail hours including weekends and public holidays

Interested applicants may choose to apply / Contact me your updated resume for our consultant to find you a suitable oppurtunities

Contact Number : +65 90839650

LIM JUN SHENG Reg No: R22104301

The Supreme HR Advisory Pte Ltd EA No: 14c7279

Video Content Creator cum Editor

Working Days & Hours: 5 Day | Mon-Fri: 9am-6pm
Working Location: Ubi
Salary Range: $2000-$3000 + Attractive Bonus

Job Responsibilities:

1. Concept Development Collaborate with teams to brainstorm and develop concepts for videos.
   Research trends and audience preferences to create relevant content.
2. Scriptwriting Write scripts or outlines for video content.
   Ensure scripts are engaging and aligned with the brand's voice.
3. Pre-Production PlanningPlan and schedule shoots, including location and cast if necessary.
   Prepare shot lists and storyboards to guide filming.
4. Filming Operate cameras, record audio, and set up lighting for shoots.
   Direct subjects or actors to achieve desired performances.
5. Editing and Post-Production Edit raw footage into a final product using video editing software.
   Add graphics, music, sound effects, and other enhancements.
   Color grade and ensure the final video meets quality standards.
6. Optimization and Distribution Optimize video content for various platforms (e.g., YouTube, Instagram, TikTok).
   Create compelling titles, descriptions, and tags to improve discoverability.
7. Audience Engagement Monitor video performance and engage with the audience through comments and social media.
   Respond to viewer feedback and adapt future content accordingly.
8. Collaboration Work with marketing, graphic design, and other departments to align video content with overall campaigns.
   Collaborate with influencers or other creators for joint projects.
9. Content Strategy Contribute to the development of a content calendar for consistent video output.
   Analyze metrics and performance data to refine content strategy.
10. Staying Current Stay updated on industry trends, new video technologies, and best practices.
    Continuously learn and adapt to changes in audience preferences and platform algorithms.

Responsibilities:

• Quality Assurance. Ensure all video content is high quality and free of errors.
• Budget Management. Manage budgets for video production, including equipment, location fees, and talent costs.
• Time Management. Meet deadlines for content production and publication.
• Brand Alignment. Ensure all content adheres to brand guidelines and messaging.
• Legal Compliance. Secure necessary permissions and licenses for music, images, and locations used in videos.

Job Requirement:

• Technical Skills. Proficiency in video editing software (e.g., Adobe Premiere Pro, Final Cut Pro).
• Understanding of camera equipment and lighting techniques.
• Keen to work under wallcoverings solutions for both professional and residential interiors.

Tan Jia Jun | REG No: R23112681

The Supreme HR Advisory Pte Ltd| EA No: 14C7279

Videographer cum Editor

Working Days & Hours: 5 Day | Mon-Fri: 9am-6pm
Working Location: Ubi
Salary Range: $2000-$3000 + Attractive Bonus

Job Responsibilities:

1. Concept Development Collaborate with teams to brainstorm and develop concepts for videos.
   Research trends and audience preferences to create relevant content.
2. Scriptwriting Write scripts or outlines for video content.
   Ensure scripts are engaging and aligned with the brand's voice.
3. Pre-Production PlanningPlan and schedule shoots, including location and cast if necessary.
   Prepare shot lists and storyboards to guide filming.
4. Filming Operate cameras, record audio, and set up lighting for shoots.
   Direct subjects or actors to achieve desired performances.
5. Editing and Post-Production Edit raw footage into a final product using video editing software.
   Add graphics, music, sound effects, and other enhancements.
   Color grade and ensure the final video meets quality standards.
6. Optimization and Distribution Optimize video content for various platforms (e.g., YouTube, Instagram, TikTok).
   Create compelling titles, descriptions, and tags to improve discoverability.
7. Audience Engagement Monitor video performance and engage with the audience through comments and social media.
   Respond to viewer feedback and adapt future content accordingly.
8. Collaboration Work with marketing, graphic design, and other departments to align video content with overall campaigns.
   Collaborate with influencers or other creators for joint projects.
9. Content Strategy Contribute to the development of a content calendar for consistent video output.
   Analyze metrics and performance data to refine content strategy.
10. Staying Current Stay updated on industry trends, new video technologies, and best practices.
    Continuously learn and adapt to changes in audience preferences and platform algorithms.

Responsibilities:

• Quality Assurance. Ensure all video content is high quality and free of errors.
• Budget Management. Manage budgets for video production, including equipment, location fees, and talent costs.
• Time Management. Meet deadlines for content production and publication.
• Brand Alignment. Ensure all content adheres to brand guidelines and messaging.
• Legal Compliance. Secure necessary permissions and licenses for music, images, and locations used in videos.

Job Requirement:

• Technical Skills. Proficiency in video editing software (e.g., Adobe Premiere Pro, Final Cut Pro).
• Understanding of camera equipment and lighting techniques.
• Keen to work under wallcoverings solutions for both professional and residential interiors.

Tan Jia Jun | REG No: R23112681

The Supreme HR Advisory Pte Ltd| EA No: 14C7279

Job Description:

• Responsible for product design and user experience optimization for the AI accounting assistant, defining core functionalities and user workflows to ensure ease of use.
• Design basic UI prototypes and participate in user testing and feedback collection, driving continuous product improvement.
• Work closely with AI and backend engineers to coordinate project development progress, ensuring timely product launch.

Requirements:

• Bachelor’s degree or higher, with a preference for majors in computer science, design, product management, or related fields.
• At least 2 years of experience in product management or UI/UX design; experience in mobile product development is preferred.
• Familiar with writing product requirement documents (PRDs) and basic prototyping skills (such as Figma, Sketch).
• Strong user needs insight, able to quickly identify user needs and translate them into product features.
• Excellent communication and coordination skills; experience in financial or AI products is a plus.

Responsibilities:

• Work closely with customer and internal team during new product introduction to deliver design project
• Coordinate with factory to ensure timely delivery of prototypes during sample builds
• Facilitate DFM activities during development to ensure product is manufacturable
• BOM creation and Maintenance in SAP system (Part addition, BOM Upload, BOM Change)
• Handover of project to factory for mass production

Requirements:

• At least 3 years of working experience in electronics manufacturing environment
• At least a Bachelor’s degree in Engineering
• Good understanding of electronics manufacturing process
• Experience in project / product management
• Fluent in verbal and written communication

Interested candidates are to submit a detailed resume to speed up the application process.

Only shortlisted candidates will be notified. Thank you for applying.

• A1 Main Contractor
• 5.5 Alternate saturdays (South of Singapore)
• Building Project

Our client is in the Civil & Infrastructure Contractor and has a strong presence globally. They are looking to fill the role of C&S Design Engineer

Responsibilities:

• Prepare technical reports, designs, and detailed drawings.
• Perform calculations for pressures, loads, and stresses.
• Assess the strength of construction materials and select them appropriately.
• Provide expert advice on safe construction and design practices.
• Secure planning permissions and ensure compliance with building regulations.
• Analyze the configuration of essential structural components.
• Oversee and inspect contractor work to guarantee structural integrity.
• Inspect properties to assess conditions and foundational stability.
• Utilize computer-aided design (CAD) software for simulations and modeling.

Requirements:

• Degree in Civil or Structural Engineering.
• Professional registration with the Institute of Structural Engineers.
• Proven experience in project management.
• Advanced knowledge of construction techniques, materials, and legal standards.
• Strong grasp of physics and mathematics.
• Ability to collaborate effectively with other professionals.
• Exceptional attention to detail and excellent organizational skills.
• Ability to work efficiently under pressure and meet deadlines.
• Excellent communication skills and proficiency in IT.

OTHER INFORMATION:

Location: South

Working days: 5.5 Days

Salary: Up to S$6,500 / Negotiable and Bonus (salary will be commensurate according to experience & qualifications).

The Company strives to achieve employee satisfaction by providing attractive staff benefits, welfare & training programmes to all staff.

HOW TO APPLY:

Simply submit your application with your updated Resume in MS Word Format to David Sia Yi Sheng (EA Personnel Reg. No.: R1875905) (BEP) by clicking the ‘Apply link’ or call your friendly Consultant, David , at 6590 9958 or 9271 7510 for a confidential discussion.

Please click APPLY NOW button to submit your application

Please indicate the below information in your resume:

• Current & Expected salary
• Reason(s) for leaving
• Availability to commence work

We regret only short listed candidate will be notified. All applications will be treated with the strictest confidence.

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We regret that only short-listed candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt-out by unsubscribing in the mailer. You may refer to and access our website at www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Kindly ensure your resumes provided to us does not contain your full NRIC number and full home address during your job application.

Position Title: Jewellery Design

Location: Orchard

Working Days: 5-day work week, full time employment

Working Hours: 10.45am – 9pm

Salary: $2,400- $3,300

The Role:

We are looking for an in-house jewellery designer. You will be working directly with the customers and to create bespoke designs. This role is multi-faceted and you would be also operating as a sales executive when clients are in the boutique. When you are with clients, you are expected to provide them with product knowledge and effectively sell both the brand and product. You will be required to share brand history, product knowledge and the highest level of customer service with all potential customers. As a designer, you need to be able to discuss a range of design options and formulate creative original ideas. You would be required to sketch out ideas and designs, sometime using computer-aided design (CAD), to help the client visualize the final design.

Skills:

Formal training in Jewellery Design

• Drawing and computer design skills to produce designs
• Work with deadlines
• Commercial awareness and practical knowledge when designing

Requirements:

• Basic I.T. skills are necessary, knowledge of MS Excel and Word
• Advanced skills in PhotoShop, Illustrator
• Able to commit to retail hours including weekends and public holidays

✅The Supreme HR Advisory Pte Ltd EA No: 14c7279

✅SAMUEL SIAW Reg No: R24124745

Singapore Based (Ang Mo Kio)

5 Days work per week (Mon – Fri 8.30am – 6pm)

$6000 to $9500

Degree / Diploma in Electrical Engineering, Mechanical Engineering or Building Services. + Good knowledge in M&E works, planning capability and authorities / statutory compliance.

Minimum 8-10 years’ experience in Mechanical & Electrical services. + Good knowledge and experienced in Design & Build Tender for M&E services is preferred

Career Progression Opportunities

Job scope

Preparation and submission of M&E tenders, including reviewing technical specifications, cost estimates and project timelines.

Taking charge on M&E QS related matters and responsible from tender to pre-contract and post contract administration duties.

Prepare tender clarifications, liaise with consultant, attend site visit and tender briefings/meetings.

Responsible for interpretation of specifications, compliances, review of tender drawings for any discrepancies and any other relevant document.

Conduct detailed technical evaluations of tender documents to ensure compliance with project requirements and industry standards.

Identify potential risks and challenges associated with tender submissions and develop mitigation strategies.

Plan and execute with tender team to achieve KPI.

Suggest Value Engineering solution for MEP works, if required, in the tender.

Assist in the presentation slide, technical write up for tender submission/interview and attendance of tender interview.

Involve in project write up such as understanding scope of work, manpower histogram, programs and project schedule using Microsoft Project software.

Provide technical expertise and guidance to support the decision-making process during tender evaluations.

Evaluating quotations from sub-cons/suppliers according to tender requirement.

Whatsapp: +65 80135651(Alvin)

Alvin Chua Ming Jing:R23116192

The Supreme HR Advisory Pte Ltd: 14C7279

Senior Marketing & Communication Executive

Location: Gul Crescent [Company Transport @ Chinese Garden, Lakeside, Boon Lay]
Working Hours: 8.15am - 5.45pm
Working Days: 5 Days [Monday - Friday]
Salary: $3,000 to $3,500

Responsibilities

• Attend to customer enquiries through various channels such as email, phone and in person.
• Design and/or edit marketing collaterals (brochure, leaflets etc)
• Oversee library of self-produced and principal supplied brochure, video resources and other Marketing and Sales support materials.
• Conceptualise, plan and execute marketing campaigns; both online and offline
• Handle all activities related to organisation of events (training, product seminars, roadshows, exhibitions – event budget, liaising with vendors, handling, registration, managing exhibition booths etc)
• Maintain website and work with vendor.
• Social media management, review and assist to maximise brand experience and engagement.
• Explore opportunities with different e-commence platforms and partners for collaboration.
• Execution of content creation (videography, photography) and produce product videos.
• Prepare and update price list.
• Any other ad-hoc duties assigned.

Requirements:

• Bachelor’s degree in marketing, Digital Marketing, or related field
• At least 2 years of relevant working experience
• Experience in digital marketing and social media management.
• Knowledge of graphic design software (e.g., Adobe Creative Suite)
• Familiarity with marketing analytics tools (e.g., Google Analytics)

Chew Xing Shan Reg No: R22107044

The Supreme HR Advisory Pte Ltd EA No: 14C7279

WhatsApp: +65 83592812 [Shannon]

Accountant / Accounts Assistant

1) Job Description

- Book-keeping, data entry and filing works

- Handles tax matters, e.g. quarterly GST, yearly year-end closing and corporate tax

* Monthly / Quarterly closing of accounts, Year end closing and preparation for ECI and Form C filings

- Assist Management in having overview of company financial health

2) Requirements

- With experience in handling companies accounts and able to tie/balance, prepare financial statements that are according to the government's regulations

* Able to work well in a team

- Possess positive attitude

- Professionalism

- Responsible

* Looking to work long term

~~

Full job description

Job description

Individual will be involved in:

Assisting in accounting and financial recordkeeping and maintenance

Support for corporate secretarial file maintenance and integrity upkeep

Direct support to fellow team-mates and directors for administrative needs.

Any accounting and administrative works assigned

A keen sense to learn and apply knowledge, and an overall interest in accounting is desired.

Only selected candinate will be contact.

Roles & Responsibilities:

• Responsible for the bidding information collection
• Prepare all bill of quantity for the whole project and vendor report
• Prepare monthly progress report and progress claim to Consultant
• Call for supplier/subcontractor quotation and compare with tender details
• Verify subscontractors' and suppliers' claim and prepare interim payment certificate
• Responsible for the quality/accordance to the specification of the works
• Check all new drawings for variations works
• Reponsible for collecting, sorting and checking of bidding calculation of quantities
• Organize subcontract price and negotiations
• Compile bidding quotations and submit to department manager to review
• Perform all other duties or tasks as assigned by immediate superiors
• Any other duties not mentioned above as assigned by the Company

Requirements:

• Degree or Diploma in equivalent qualification
• Individual of the highest caliber who are confident, driven & with excellent interpersonal skills

(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)