Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-Level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 5 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler), Photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Candidate’s Responsibilities:

· Meet and understand client’s objectives and prepare design proposal

· Undertake design project from concept to completion

· Produce 3D & detailed drawings

· Work with sub-contractors or suppliers to understand and source for materials

· Develop creative, solution-base plans to clients in areas of space planning, furniture products, colours and mood board

· Take on-site measurements and all relevant photos for planning and conceptualising

· Work closely with project team and client during the content construction/implantation phase

· Understand the construction process and prioritize the procedures at various stages

· Ensure dimensions and materials use are accurate and fully functional

· Work diligently to deliver services and completed projects to client timely and professionally

· Maintain work communication and attend to client, project team enquiries always via WhatsApp and other communication tools, outside working hours if necessary

· Any other ad hoc duties as assigned

Candidate’s Requirements:

· Possess a Diploma/Degree in Interior Design & Architecture or equivalent

· Proficient in AutoCAD, 3D Max, Sketch-up, Photoshop

· Exceptional time management and deliver jobs punctually

· Strong analytical skills and confident in handling clients’ concerns

· Organized, trustworthy, highly motivated, resourceful and able to work independently

· Team player with good interpersonal and communication skills

· Require to handle projects simultaneously

· Able to communicate Mandarin for Chinese speaking associate

Job Types: Full-time, Permanent

Salary Range: $7,000.00 to $9,000.00 per month

Schedule:Monday to Friday

Experience:

• Interior design: 5 years (Preferred)
• AutoCAD: 5 years (Preferred)
• Sketchup: 5 years (Preferred)

Edit job

Open

View public job page

Assist Project Manager with the overall direction, coordination, implementation, execution, control, and completion of specific projects ensuring consistency with company strategy, commitments, and goals including (but not limited to):

• Supervise and manage landscape crews.
• Attend site inspection, tender show round, and meeting.
• Assist in bidding, estimating, and contract negotiations
• Prepare work schedules, and various reports and keep records of work done on-site.
• Pre-empt and troubleshoot on-site problems.
• Ensure safety regulations are implemented and complied with.
• Assist in manpower recruitment.

Requirements:

• Min. Diploma in Horticulture or equivalent.
• Min. 2 years practical experience in Indoor plant display / Nursery management / Outdoor maintenance.
• Competent in Microsoft Office applications (Word, PowerPoint, Excel, Outlook).
• Good communication and interpersonal skills, with the ability to interact and communicate effectively with all levels of staff.
• Must be well organized, meticulous, and possess good planning skills.
• Class 3 Driving License.

The working days/hours:

• Monday to Friday - 8:00 am to 5:00 pm

• Saturday - 8:00 am to 12:00 pm (2 sat off)

Roles & Responsibilities:

The Associate Engineer is responsible for producing design drawings, recommending solutions, and collaborating closely with the Sales and Production departments to meet customer requirements.

Job Responsibilities:

• Design, constructing, and testing various technological products.
• Conducting design tasks using AutoCAD & Inventor.
• Collecting information about clients’ requirements & collaborating with Managers to create products through advance computer software.
• Accessing and offering feedback on proposed changes to engineering standards and policies, which may include ASME Y14.5-2009 STD for GD&T (Geometric Dimensioning & Tolerancing).
• Undertaking ad hoc duties as assign by the manager.

Job Qualifications and Requirements:

• Minimum fresh graduate with Diploma in Engineering: Minimum 5 years’ experience in creating technical/engineering drawings and designs with highly skilled in AutoCAD & 3D modelling, creating visualizing using Inventor.
• A self-starter person with strong focus and with a passion on achieving results.
• A commitment to maintaining quality mind-set in all aspects of work.
• The ability to manage multi projects within tight deadlines and effectively multitask under pressure.
• Excellent verbal and written communication skills.
• Proficiency in mathematics.
• The ability to handle both simple tasks and more complex assignments.
• A minimum of 3 years of experience in the semiconductor industry or related field.

JOB OVERVIEW:

We are seeking a motivated and enthusiastic Digital Marketing Intern to join our team. In this role, you will have the opportunity to gain hands-on experience in the dynamic fields of Search Engine Optimization (SEO) and Search Engine Marketing (SEM).

The ideal candidate is a quick learner, detail-oriented, and eager to contribute to our digital marketing efforts.

KEY RESPONSIBILITIES:

• Assist in the development and implementation of SEO strategies to improve organic search rankings.
• Conduct keyword research to identify opportunities for website optimization.
• Optimize on-page elements including content, meta tags, headers, and URLs.
• Generate regular reports on website performance using Google Analytics and other relevant tools.
• Collaborate with copywriters to ensure SEO best practices are integrated into content development.
• Support the management of pay-per-click (PPC) campaigns across platforms such as Google Ads.
• Help create and test ad copy and landing page variations to maximize campaign effectiveness.
• Monitor and analyze campaign performance data to identify trends and opportunities for improvement.
• Assist in the development of A/B tests and conversion rate optimization efforts.
• Stay updated on industry trends and best practices in digital marketing, SEO, and SEM.

JOB REQUIREMENTS:

• Pursuing or recently completed a diploma in Marketing, Advertising, Communications, or a related field.
• Basic understanding of digital marketing concepts, SEO, and SEM.
• Familiarity with tools such as Google Analytics, Google Ads, and SEO keyword research tools is a plus.
• Strong analytical and problem-solving skills.
• Excellent written and verbal communication skills.
• Ability to work independently and as part of a team.
• Detail-oriented and highly organized.
• Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint).
• Basic knowledge of HTML and content management systems (CMS) is a bonus.

Interested and qualified applicants, please send in your resume with current and expected salaries to: [email protected].

Remuneration package shall be determined based on experience and qualifications. Only shortlisted candidates will be notified.

Thank you for applying.

Responsibilities

• Brainstorm creative design idea
• Liaise with customer on design requirement
• Executive full set drawings for submission to customers and building management etc (3D Visuals, Layout plan, Elevation , Detail drawing, material board and etc)
• Able to find new material in the market trend.

Requirement

• Minimum Diploma Interior Design / Architecture Qualification
• No experience but with Interior Design background are welcome to apply as training will be provided.
• Proficient in AutoCAD, 3D Max + Vray, Adobe Photoshop, illustrator and microsoft office.
• Comprehensive knowledge of construction details and materials.
• Relish working in a challenging and fast paced environment.
• A proactive and conscientious team player

Purpose of the Role: To lead Food & Beverage Design and Facility planning for both existing and pipeline hotels across all brands with a primary focus on Luxury and Lifestyle brands within the IHG portfolio, and liaise with internal and external stakeholders and report on progress of projects.

Back of House Planning Scope of works include but are not limited to the following:

• Create a detailed F&B Facility Area Plan(“FAP”) per hotel based on brand, country, Gross Floor Area(“GFA”), business case etc. for all InterContinental Hotels Group (“IHG”) hotel brands excluding the Holiday Inn Express brand
• Review back of house (“BOH”) facility design across all phases. Zoning, Concept, Schematic, Detailed Design, tender documentation value engineering, for Luxury & Lifestyle up to Installation of F&B equipment & commissioning of F&B Outlets
• The following would be constantly reviewed / calibrated / protected for all IHG branded hotels:

1. Review Design for Food Safety Management Systems (“FSMS”) principles;
2. Review clean and dirty paths within the design of the F&B outlets;
3. Review storage facilities ensuring they match location / supplier chain etc;
4. Review refuse area ensuring it matches municipality requirements;
5. Review BOH areas for adjacencies;
6. Review BOH and front of house (“FOH”) drawings, sections and elevations etc;
7. Review BOH drawings, sections and elevations to ensure show kitchens / bars have integrated design between kitchen consultant & Interior designer;
8. Review basic function equipment to deliver brand & concept;
9. Review to ensure optimal efficient & ergonomic work flows are achieved;
10. Review architectural, interior designs and equipment designs to ensure areas are not over designed either by way of equipment brand / specification / capacity / space planning;

Front of House Scope of works include but are not limited to:

• Review and validate proposed concepts by 3rd party consultants with F&B Operations leaders and/or propose existing concepts that could be utilized
• Review of FOH Facility design across all phases. Concept, Schematic & Detailed Design Phases (all IHG hotel brands are included)
• Review FOH circulation, adjacencies, and spatial planning
• Review FOH facilities to ensure the following has been integrated into the design; Point of Sale (“POS”), side stations etc.
• Facility matches and supports concepts / number seats / number of bars FOH & BOH
• Facility matches brand and projected manning.

The following would be constantly reviewed / calibrated / protected for all IHG hotel brands:

• Review number of seats as per Facility Area Program(“FAP”);
• Review table sizes, side station – clean & dirty, POS stations;
• Review all F&B outlets ensuring they have sufficient associated pantry support;
• Review FOH storage requirements;
• Review to ensure sufficient FOH beverage areas / storage etc. across acholic & non-alcoholic requirements matching an F&B outlet’s concept & facility;
• Review plans to ensure areas are not over designed either by way of equipment brand / specification / capacity;
• Review plans to ensure areas are not over designed by way of space planning
• Review coffee & tea equipment to ensure all equipment are IHG brand compliant and fit for purposes / fit for facility / outlet or concept.

Education

• Bachelor’s Degree or Equivalent in Hotel Management, Culinary Services or equivalent operational experience

Experience

• Minimum 10 years related experience in either:
• F&B operations and or proven successes in key operating hotel, multi hotel units and/or restaurant operations & pre-openings.
• F&B Design and/or development
• Regional experience with a good understanding of local markets, F&B trends etc.
• Hotel working experience and experience in a multi-national environment is considered an added advantage.

Technical Skills and Knowledge

• Understanding of brand differentiation and standards
• Possess leadership competencies; a focused leader with a high level of motivation
• Possess strategic, analytical, problem solving and project management skills
• In-depth knowledge of hotel operations to include F&B, kitchens, operations and hotel openings
• Effective communications and presentations skills
• Strong influencing, negotiating and consensus-building skills to deal with broad spectrum of stakeholders
• Good computer application skills in Word, Excel, Salesforce, Outlook
• Ability to read and work with architectural, kitchen, MEP, interior design drawings

Job Description:

· Create attractive designs and layouts for various projects

· To work on architectural and interior design proposals and presentations

· Prepare tender and construction documentation

· Involve in site measurement, layout plan & selection of material used

· Prepare design concept sketches, space planning, design development, elevation and detail drawings

· Responsible for the production of interior design drawing as well as 3D drawings

· Ability to meet deadline of multiple projects

· Communicate effectively with vendors and team in order to address client's needs

· Maintain industry knowledge in order to stay relevant

Requirement:

· min 2-3 years of experience

· Excellent teamwork and interpersonal skills

· Able to work independently & hardworking

· Able to work under pressure and with a sense of urgency to meet tight deadlines

· Proficient in 3D Max, AutoCAD, Photoshop and other design-related software

. Able to produce a good hand sketch is an advantage

Event Designer

• Location: Ubi
• Working Day: 5 days
• Working Time: 9am - 6pm
• Salary: $ 2500 - $ 3000

Job Responsibilities

• Planning an event’s theme, setting and overall design, including decorations and entertainment
• Overseeing the event’s budget and making sure it stays within the predetermined limits
• Meeting with clients to discuss their needs and preferences
• Creating floor plans and models of the event space that show where each element will be located
• Coordinating with event managers, coordinators, planners, and other team members to ensure that all aspects of an event are executed smoothly

Requirements

• At least a Diploma in Art / Design / Creative Multimedia or equivalent
• At least one year of relevant working experience
• Highly proficient in graphic / creative design programs: Adobe CS (Photoshop, Illustrator, InDesign, Acrobat).
• Strong in creative storytelling and design mastery
• Strong 3D skills preferred.

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

• Identify requirements and features for semiconductor equipment and create concepts and architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Responsible for design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Create a detailed Mechanical drawing and apply analysis tools like Fish Bone Diagram and FMEA.

Requirements:

• Degree in Mechanical Engineering or equivalent
• At least 5 years of experience in Semiconductor Equipment Design.
• Familiar with 3D CAD software.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Job Description

• Industry/ Organization Type: Manufacturing/Semiconductor Technology
• Position Title: Senior Design Engineer
• Working Location: Kallang
• Working Hours: Monday – Friday, 9 am – 6 pm
• Salary Package: Up to $7,000 + VB
• Duration: Permanent

Key Responsibilities

• Define requirements and features for semiconductor equipment
• Develop concepts and architecture of new equipment
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps and valves.
• Produce detailed engineering drawings
• Perform design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements
• Improve design of legacy machines
• Application of analysis tools like Fish Bone Diagram, FMEA etc.

APPLY NOW!!!

• Degree in Mechanical or Mechatronics Engineering with more than 5 years of experience in semiconductor equipment design
• Good knowledge and experience in the following areas:

1.Design of automation or semiconductor equipment

2.High precision machine design

3.Design of High-Speed Pick and Place mechanisms

• Familiar with 3D CAD software
• Ability to plan, prioritize, and coordinate throughout the project cycle.
• Ability to work independently with high level of motivation and communicate with all levels.
• Equipment troubleshooting skills.
• Ability to produce detailed Mechanical drawings and apply knowledge of Geometric Dimensioning & Tolerancing.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65782 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Our client is a leading MNC company that manufacturing electrical & electronics components.

Job Scope:

• Development of Analog/Mixed-Signal circuits from specification to prototypes.
• System-Level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation and integration.
• Schematic entry, corner simulation, layout consideration and post layout simulation.
• Work closely with layout engineer to conduct the physical implementation (layout), LVS/DRC layout verification, and chip floor planning.
• Responsible for layout optimization, error debugging, and post layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects and layout engineers to achieve full-chip integration, place and route, top-level verification and tape out.

Job Requirement:

• Ph.D/Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Experience on CMOS Analog IC design
• Good design experience in Analog IC design involving two or more blocks
• Good design knowledge in ESD and Latch-up

Interested candidates who wish to apply for the advertised position, please click "apply now" or email us an updated copy of your resume in MS Word format.

We regret to inform that only shortlisted candidates will be notified.

PERSOLKELLY Singapore Pte Ltd

EA License No : 01C4394 | Ng Theng Yee | Reg No: R22108658

Job Description

- Meet prospective clients and handles their interior design requirements.

- Provide professional advice to clients on design concept, material selection and renovation solutions.

- Prepare quotation based on proposed design and client's requirements.

- Assists in project management includes documentations.

- Any ad-hoc duties as assigned.

Job Requirements -

- Have passion & creative in interior design with or without relevant experience.

- Training will be provided

- Proactive, resourceful and good working attitude.

- Independent with good interpersonal and communication skills.

- Required language : English & Chinese

- Singaporean/ PR and Work Pass may apply

Interested candidates, please send in your resume, including current & expected salary to [email protected]

We regret to inform that only shortlisted candidates will be notified.

The Singapore University of Technology and Design (SUTD) is offering position for research fellow who will work closely with Dr. Meixia Lin working on various projects about Numerical Optimization, Convex and Non-Convex Optimization, Optimal Transport, Machine Learninig, and others.

The position is expected to last from one to two years. The start date is negotiable.

The candidate is expected to have a PhD in applied mathematics, computer science, or electrical engineering and a strong publication record in optimization or machine learning.

Priority will be given to those who have some computational experience.

Fashion Designer

• Working Location: Tai Seng
• Working Days: Monday to Friday (9am - 6pm)

Requirements:

• Diploma or Degree in Fashion Design or related discipline.
• At least 2 years of relevant experience in fashion design.
• Knowledge in textile, garment construction, design and development.
• Proficiency in Photoshop and Illustrator.

Responsibilities:

• Mood boards, design development and presentation.
• Design and fabric research, sourcing, preparing prototype and prototype development.
• Create technical drawings for sampling and presentation.
• Liaise with relevant parties on development and construction.
• Manage fabric and trims library.

https://wa.me/6596420989

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

The role of an interior design director is to oversee interior design staff while completing a variety of high-level creative duties. As an interior design director, your responsibilities include developing marketing strategies for the team, meeting with clients, giving direction to staff, and monitoring the progress of projects and plans.

Requirement:

1. Able to work with long hours, weekend and public holiday.

Our client is a Global MNC, one of the leading players in the Oil & Gas sector. Due to business needs, they are now recruiting a Project Engineer to be part of their team for ongoing transformation projects. They are located in the West – easily accessible.

Responsibilities:

• Responsible for overseeing the different functions of project execution for the company from start to end (eg. Awarding of contract, delivery of goods etc.)
• Responsible for the company’s project management, allocating resources to the different areas when required, and resolving any issues present during the project phase
• Responsible for overseeing the various scope of order, and monitoring the various applicable project specifications
• Responsible for attending to the various technical and commercial reviews, resolving any enquiries from both internal/external stakeholders
• In charge of handling/monitoring the various projects’ schedule development, and maintaining the required project documentations (eg. purchasing, shipping and invoicing etc.)
• In charge of resolving the customers’ complaints, overseeing any order deviation from the various customers
• All other ad-hoc duties as assigned

Requirements:

• Minimum Diploma in Chemical Engineering, Mechanical Engineering or other relevant field of studies
• Minimum 2 years of relevant working experience in project management
• Experienced and Knowledgeable in process plant design and management

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

EA License No: 19C9682

EA Personnel No: R22104689 (Lim Yu Xun, Acer)

Job Description & Requirements

- Meet prospective clients provided by company and handles their interior design requirements.

- Provide professional advice to clients on design concept, material selection and renovation solutions.

- Prepare quotation based on proposed design and client's requirements.

- Assists in project management includes documentations.

Job Requirements

- Have passion & creativity in interior design

- Proactive, resourceful and good working attitude.

- Independent with good interpersonal and communication skills.

- Strong co-ordination and excellent follow through skills.

- Preferably possess knowledge in fitting out works and have a keen eye in details.

- Required language : English & Chinese

Interested candidates, please send in your resume, including current & expected salary to [email protected]

We regret to inform that only shortlisted candidates will be notified.

Handle full set of account

Maintain proper accounting records, invoices, payroll, payments

Budget and costing estimation

Manage General Ledger, Financial Statement, Balance Sheet, Bank Reconciliation

Project costing calculation
Prepare for monthly and annual report

GST submission and filing

other ad-hoc task

Job Requirement:

Minimum Diploma in Business Administration / Accounting
Minimum 2 years of relevant experience, with AR/AP & Payroll experience

Responsibilities:

• Support global NPI (New Product Introduction) on product design and development.
• Prepare drawing proposal and tooling design.
• Conduct tooling buy-off and hands-on tooling setup.
• Initiate and conduct the improvement project evaluation.
• Liaise with customer on design requirement and alignment.
• Liaise with factory on capability compliance.
• Responsible on tooling expenses and cost control.
• Overseas travelling may be required.

Requirements:

• Min. Diploma in Mechanical or Mechatronics Engineering.
• Proficient in using Solidworks software.
• Preferably with working knowledge and experience in taping machine, laser mark, jig & fixtures design.
• Positive attitude and self-motivated.

Interior Sales Designer

Job Description

- Meet prospective clients and handles their interior design requirements.

- Provide professional advice to clients on design concept, material selection and renovation solutions.

- Prepare quotation based on proposed design and client's requirements.

- Assists in project management includes documentations.

- Any ad-hoc duties as assigned.

Job Requirements -

- Have passion & creative in interior design with or without relevant experience.

- Training will be provided

- Proactive, resourceful and good working attitude.

- Independent with good interpersonal and communication skills.

- Required language : English & Chinese

- Singaporean/ PR and Work Pass may apply

Interested candidates, please send in your resume, including current & expected salary to [email protected]

We regret to inform that only shortlisted candidates will be notified.

Duties for the director of administration will include managing administrative staff, guiding operating methods, disbursing funds to departments, monitoring budgets, improving information systems, overseeing human resources requirements, updating senior executives, analyzing financial data, and developing operating procedures and policies. Your superior organizational skills and strategic planning will assist our organization in generating positive revenue growth, harmonizing operations, improving employee performance, and enhancing our business model.

Requirement:

1. Able to work with long hours, weekend and public holiday.

• Identify requirements and features for semiconductor equipment and create concepts and architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Responsible for design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Create a detailed Mechanical drawing and apply analysis tools like Fish Bone Diagram and FMEA.

Requirements:

• Degree in Mechanical Engineering or equivalent
• At least 5 years of experience in Semiconductor Equipment Design.
• Familiar with 3D CAD software.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Location: Tanjong Pagar

Working Days: 5 days, Monday-Friday

Working hours : 9 to 6 p.m

Salary : $4,000-$5,000

Key Responsibilities:

• Responsible for quantity take off and cost estimation.
• Preparation of tender submission with specific deadline.
• Source, planning, negotiate and award of contract to vendors.
• Responsible for material order processing and cost control.
• Evaluate and process vendor claims.
• Prepare monthly progress claims for submission to consultants in timely manner.
• Finalize project accounts with clients and vendors.

Requirements:

• Min. Diploma in related field of studies.
• At least 5 years of Quantity Surveying experiences, preferably in Interior Design.
• Able to work under pressure and work under minimal supervision.
• Hands-on with Interior Design works will be high priority.

https://wa.me/6596420989

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

Main Job Tasks & Responsibilities

1) Lead and spearhead the operation and execution of project from inception development Phase to manufacturing start up to site installation to completion of project.

2) Lead the project and facilitate coordination with client, architect, consultant and NSC.

3) Monitor the site progress with site manager/coordinator/supervisor

4) Develop project schedule

5) Attend site meeting or progress meeting with client/architect/designer/consultant together with site project team.

6) Handles all correspondences/documentation and prepare reports(emails, site progress report weekly update project schedule, etc.)

7) Monitor and manage approved project budget by management and provide value engineering to work scope and materials

8. Manage and resolve design and technical issues with site manager/coordinator/supervisor/Factory manager.

9) Plan and schedule project timelines

10) Implement and manage project changes and interventions to achieve project outputs

11) Provide direction and support to project team

12) Quality assurance

13) Constantly monitor and report on progress of the project to management

14) Present reports defining project progress, problems and solutions (submit weekly site progress report to management)

15) Monitor and manage rectification works.

16) To establish progressive and finalized final claim to clients for each completed projects

17) To participate in ad-hoc projects and other duties when required

18) To evaluate and approve sub-contractors/suppliers claim and recommend appropriate payments

19) Attend company's weekly and fortnightly meetings

Requirements:

1) Experience in ID projects
2) Knowledge of both theoretical and practical aspects of architectural, building and mechanical and electrical works
3) Proven experience in managing site work and managing a project team
4) Proven experience in people management and problem solving skills

5) Able to work with long hours, weekend and public holiday