Responsibilities

• · Leading Process Design Team for Oil & Gas Projects and guide a team of about 10 Process Design Engineers / Designers to finish the Process design (start from Basic design to Detail Design) of the project.
• · Leading a Team of Process Engineers & Designers in Preparation & Review of PFD, P&IDs, MSD, PSD, Hydraulic calculations, Equipment sizing calculations, BOG calculations, Heat Loss calculations, Tank Venting calculations, Tank capacity calculations, Heating coil calculations, PSV calculations, Process data sheets for Equipment’s such as pumps, compressors, Refrigeration unit, Tanks, Process data sheets for Instruments such as control valves, PSV, PT, TT, LT, Flow meter, Process line list, Heat & Material Balance, HAZOP & SIL Study, Operation Manual, Process control Narrative, Cause & Effect Diagram, Surge Analysis.
• · Review & Checking of Process Documents such as PFD, MSD, P&IDs, Hydraulic Calculations, Process Data Sheets, Surge Analysis, Design Calculations etc to ensure that all the Process documents comply to applicable Codes & Standards and Project Requirements
• · Review & Checking of Surge Analysis report using Pipenet Transient Module for product loading/unloading operation, fire water network systems etc.
• · Review & checking of various process philosophies like Process Control Philosophy, Operation Philosophy, Cause and Effect diagram, Flare and blowdown philosophy, isolation philosophy, Vent & Drain philosophy, shutdown philosophy.
• · Participation in Design Review, HAZOP Study, SIL Study, HAZID Study, ALARP, Bow Tie, MAHM, RAM Study, Alarm Rationalization workshop, SIMOPS, Constructability review carried out during various stages of project.
• · Review Hazop Report, SIL Assessment & Verification Report & Responsible for Closure of all Hazop & SIL Study Recommendation
• · Preparation & Implementation of checklist for all Process Documents
• · Management of Process Discipline Engineers Team for development of Process Design of Major Projects from feasibility studies through Conceptual Design to Detail Engineering.
• · Pre-Bid, FEED & Detailed Design documents review.
• · Maintain Design integrity and quality within the Process Engineering Team.
• · In-house Engineering Activities and Process Engineering Man Hours Estimation and Schedule.
• · Preparation, Monitoring and Control of Process Engineering Document Control List and expedite for delay/ approvals/resolution of open issues.
• · Responsible for Process Engineering Execution Methods and Procedure, Process Engineering Disciplines Co-ordination, Process Engineering Deliverables delivery for Project Execution, Process Man-hours Monitoring, Attending design review Meetings with Clients and Package vendors, PSSR+HAZOP+SIL study.
• · Inter Discipline Review of other Discipline Documents including vendor documents, GA drawings, Instrument data sheets etc for consistency, quality and Design Integrity.
• · Review of Authority submission documents like Fire Fighting Calculations (Fire & Foam network hydraulic and Surge Analysis, Fire Fighting Design Philosophy).
• · Development & Review of automated excel spreadsheets for process calculations.
• · Preparation, Monitoring and Control of Engineering Document Control List and expedite for delay/ approvals/resolution of open issues.
• · Review and ensure that all Process works are carried out in accordance with project specification. Maintain Design integrity and quality within the Process Engineering Team.
• · Preparing Process Engineering schedule and Process Engineering Man hours estimation to meet project requirements.
• · Co-ordinate with other Discipline for Process Inputs and ensure seamless Inter Discipline co-ordination between Process and other Discipline.
• · Job assignments, Mentoring and Supervision of works for Process Designers and Design Engineers.
• · Technical assistance to construction activities and attending to Site Queries.
• · Reviewing Vendor Drawings for Equipment’s and Instruments in terms of Process.
• · FEED & Pre-Bid works which involves Feasibility study.
• · Participates in discipline and inter-discipline design check and screening meetings for compatibility, completeness, and correctness in works.
• · Implement HSE objectives, policy, and company HSE procedures within his authority limit.
• · To integrate Risk-based thinking and HSE considerations into business decisions, plans and operations with the commitment to eliminate and reduce HSE hazards, aspects and risks.
• · To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.
• · To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects, and risks.

Requirements

• · Preferably Bachelor’s Degree in Chemical Engineering
• · Preferably to 15 years in Oil & Gas industry

Software Requirements

• · Proficient in Pipenet, Hysis, MS Excel, MS Word

Code Knowledge

• · API 2000, API 520, API 521, API 526, API 2350
• · SS 532
• · NFPA 11, NFPA 13, NFPA 15, NFPA 20, NFPA 30

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Mechanical Design Engineer
• Working Location: East (Closest MRT - Ubi)
• Working Hours: Monday to Friday, 9am – 6pm
• Salary Package: Up to $4500
• Duration: Permanent

Key Responsibilities

• Design and develop bespoke semi-automated and fully automated machines tailored to specific requirements.
• Oversee project coordination and manage timelines to ensure timely delivery.
• Participate in client meetings to discuss requirements for new projects and project proposals.
• Provide support during the manufacturing assembly process and assist with customer buy-off.
• Manage the entire project lifecycle, from initiation to completion

APPLY NOW!!!

• Must possess a Degree/Diploma in Mechanical/ Mechatronics Engineering
• Must be familiar with SolidWorks
• Minimum of two (2) years of relevant work experience.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70609 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Job Responsibilities.

• Electrical design for Industrial Automation Systems
• Discuss project specification with sale department, internal design team and customer.
• Ensures project specification is sufficient for electrical design work.
• Ensure the drawing, software and manual are done and issue to the customer
• Support sales department in design concept and costing for new enquiries

Job Requirements

• Diploma/Degree in Electrical & Electronics Engineering or equivalent
• Design experience in similar capacity, preferably in Industrial Automation Systems and Robotic Systems added advantage
• Candidates without relevant experience will be considered for junior engineer role
• Occasional travel maybe required
• Able to work under tight schedule and minimal supervision
• CAD knowledge such as solid edge, Auto CAD, Inventor

We regret that only shortlisted candidates will be notified.

Job Description

• Takes the lead in identifying quality improvements and establish objectives to implement them
• Develop PLC programming for Industrial Automation systems
• Work with Sales team on conceptual design
• Conduct program debugging and test run
• Update project schedule for programming, debugging, test run and installation
• Lead software design contractors on design, test run and installation
• Discuss and solve complex software related problems with customers and contractors

Job Requirement

• Diploma/Degree in Electrical Engineering or equivalent
• Positive work attitude, willing to put in extra effort during peak period
• Strong communications skills
• Design experience in similar capacity, preferably in industrial Automation and Robotic Systems added advantage
• Working knowledge of PLC & PC Programming Languages
• Able to work under tight schedule and under minimal supervision

We regret that only shortlisted candidates will be notified.

Possess extensive knowledge of power plant systems and operations, along with strong leadership skills to lead a small team of engineers and technicians. This role is crucial for ensuring that all plant engineering tasks are executed correctly. The successful candidate will oversee plant engineering designs to guarantee that the plant operates efficiently and safely.

Key Responsibilities:

• Responsible for plant engineering design activities for power plant project including cable sizing calculation, cable routing, connection drawing, loop drawings, termination diagrams
• Work with 3D design team for 2D deliverables
• Lead, mentor, and manage a small team of engineers and technical staff
• Collaborate with different parties for plant engineering coordination and support site inspection
• Provide technical support for project manager for project engineering milestone deliveries
• Support purchasing team for technical evaluation and price optimization

Desired Characteristics:

• Knowledge of onshore power plant design engineering, prefer to have work exp in Singapore.
• Experience in coordination, leading and managing plant engineering teams.
• Familiar with complicated cable tray route, cable tray support engineering design, equipment layout, installation materials, cable glands selection, cable drum schedule, cable route schedule, cable termination material, and so on.
• Proficiency in relevant engineering software and tools, such as Revit, Navisworks, Autocad
• Min 6 years experience in Electrical composite plant project

Duration: 6 months (may be extendable)
Work Location: Ayer Rajah
Working hours: 8hours a day, 5 days a week

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Job Description

Avensys is a reputed global IT professional services company headquartered in Singapore. Our service spectrum includes enterprise solution consulting, business intelligence, business process automation and managed services. Given our decade of success, we have evolved to become one of the top trusted providers in Singapore and service a client base across banking and financial services, insurance, information technology, healthcare, retail and supply chain.

We are currently looking for Technical Delivery Architect (Post Sales) who has proven track record in IT Industry. This is an exciting opportunity to expand your skill set, achieve job satisfaction and work-life balance. More details as below.

Technical Delivery Architect (Post Sales)

About the Function:

This role provides End to End technical leadership and ownership for post sales engineering of customer solutions, engaging with Pre-sales, Product Engineering, Service Delivery, Service Assurance and the customer, through design, delivery and migration stages. Provide level 4 support for design-related support issues. Serves as a technical expert on solutions design and implementation requirements to address business needs. Analyses the functionality and constraints of recommended solution / changes across multiple systems/platforms/applications. Also plans and implement processes and systems for effective delivery of complex solutions sought by customers. Roles in this function require broad and deep technical knowledge and experience across varying infrastructure requirements, development, design and re-engineering.

Key Responsibilities:

• Post-sales design documentation, implementation and migration of advanced complex solutions for enterprise customers. Complex solutions consist of multi-product services. The TDA’s role is to ensure that these services interoperate and integrate into the customer environment.
• Such products consist of but are not limited to SDWAN, MPLS, Ethernet, IPSec VPN’s, VoIP, Video Conferencing, Orchestration, WAN Optimization, Managed Security Services, Cloud Services, Managed Hosting and Complex Migration Planning, Etc.
• In general, TDA engineers must be expert level certified in one or more disciplines. Have a broad understanding across the technical landscape within Telecommunications and Enterprise IT architectures and have a natural ability to converse with both technical and executive audiences.
• Basic Knowledge on programming & scripting including but not limited to Python, Yang, Perl, JSON, etc.
• The TDA will own the technical delivery of customer solutions and will be the technical interface between the customer, product teams and project management during service delivery.
• Close engagement with pre-sales, technically validating solutions proposed are deliverable and all technical aspects are clearly defined prior to contract signature. The TDA accepts technical ownership of the solution at the point of contract signature.
• Engaging with and supporting pre-sales during contracting, with project management during service realization and the training of Service Assurance, through design, delivery and handover into lifecycle management.
• Lead customer-facing technical workshops in the delivery phase requiring excellent communication
• with the ability to articulate technical concepts clearly to all levels of competency.
• 4th Line escalation. Providing support to 3rd line teams for OEM and design related faults.
• 
  

Qualification and Experience Required:

• 8+ years industry background.
• Experience & expertise in minimum 2 SDWAN OEMs design & deployments (Cisco, Versa and Fortinet preferred).
• Expert Level certification (Equivalent to CCIE) in technologies such as Routing and Switching, Service Provider, etc.
• Application Acceleration and Optimization.
• Excellent communication and documentation skills.
• Design related background.
• Ability to demonstrate technical knowledge & industry best practices under pressure.
• Basic Coding skills are desirable.
• Telecommunication Product or Solution Design related background.

WHAT’S ON OFFER

You will be remunerated with an excellent base salary and entitled to attractive company benefits. Additionally, you will get the opportunity to enjoy a fun and collaborative work environment, alongside a strong career progression.

To submit your application, please apply online or email your UPDATED CV in Microsoft Word format to [email protected] Your interest will be treated with strict confidentiality.

CONSULTANT DETAILS:

Consultant Name : Seema Verma

Avensys Consulting Pte Ltd

EA Licence 12C5759

Privacy Statement:

We take your personal data protection seriously and adhere to both EU and local data protction regulations.

Upon submission of your CV, you grant Avensys Consulting permission to retain your personal information in our electronic database, unless you specify otherwise. This data will be used to evaluate your suitability for current and potential job openings within our organization. Should you wish to have your personal data removed at any point, a simple notification to us will suffice.

Rest assured, we will not disclose your personal information to any third parties, and we remain steadfast in our commitment to providing equal opportunities to all applicants.

Duration:

May 2025 - August 2025 (3 months)

Job Description:

We are seeking a talented and creative Visual Communication & Experience Design Intern to join our team. The ideal candidate should have an interest in niche fragrances. As an intern, your main responsibility will be to enhance the consumer experience visually, both online and offline, by effectively communicating and showcasing our Scent Journer fragrance products. Your role will involve utilizing your content creation skills to help consumers understand our products visually, without relying solely on the sense of smell. Additionally, you will contribute to increasing the average order value through visually appealing and innovative designs.

Responsibility:

• Visual Communication:

Develop creative and visually compelling content that effectively communicates the unique qualities and benefits of our Scent Journer fragrance products.

• Online Experience:

Collaborate with creative director to create visually engaging content for our website, social media platforms, and online advertising campaigns. Ensure the design elements align with our brand identity and enhance the consumer experience.

• Offline Experience:

Assist in the development of visually captivating packaging designs, point-of-sale materials, and other physical collaterals that effectively convey the essence of our fragrance products.

• Consumer Understanding:

Conduct research on consumer preferences, market trends, and competitor analysis to gain insights into visual communication strategies that resonate with our target audience. This include engage directly with customers to understand, gather feedback, and identify areas for improvement in the customer experience.

• User Experience Enhancement:

Opportunity for your input on design considerations in product development that enhance the overall consumer experience to be launch.

• Creative Problem Solving:

Develop innovative visual solutions to improve the consumer's understanding and engagement with our fragrance products, focusing on increasing the average order value. Intern will be involved in sales and pricing strategy too.

Requirements:

• Proficiency in Photoshop and Illustrator.
• Strong visual communication skills with a keen eye for detail and aesthetics, with strong creative and design skills.
• Demonstrated interest in luxury fragrances and knowledge of the fragrance industry.
• Proactive with the ability to handle multiple projects and prioritize tasks.
• Strong communication and interpersonal skills.
• Passion for understanding consumer behavior and translating it into impactful visual experiences.
• Ability to take direction, incorporate feedback, and iterate on designs.
• Confidence in interacting with customers to identify the visual communication gap.

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Overview:
DORS at Design Orchard is looking for a creative and enthusiastic Marketing Intern to support our Marketing Team in driving brand visibility, customer engagement, and store traffic. This is an exciting opportunity to gain hands-on experience in retail marketing, content creation, event coordination, and strategic planning in a dynamic retail environment.

About DORS at Design Orchard

DORS at Design Orchard is Singapore’s premier multi-label concept store, showcasing the best of local and international brands. Nestled in the heart of Orchard Road, DORS is managed by the Singapore Fashion Council, reflecting our commitment to championing design, creativity, and craftsmanship. Together, we curate a selection of exceptional fashion, lifestyle, and artisanal products, offering a unique shopping experience that celebrates innovation and individuality. Join us and be part of a dynamic team shaping the future of retail.

Key Responsibilities

Content Creation

• Assist in creating compelling content for social media, email marketing, and other digital platforms.
• Support the design and development of visuals, videos, and written materials aligned with the brand’s voice and aesthetics.
• Help manage the content calendar and ensure timely posting across all channels.

Marketing Campaigns

• Assist in the development and execution of marketing campaigns, including product launches, promotions, and seasonal campaigns.
• Conduct market research and competitor analysis to support campaign strategies.
• Track and report campaign performance using analytics tools.

Event Support

• Support the planning and execution of in-store and online events, such as product launches, workshops, and community engagement activities.
• Coordinate with vendors, partners, and internal teams to ensure event success.
• Assist in post-event evaluations and reporting.

Customer Engagement

• Collaborate with the team to develop strategies and execute plans for engaging customers through various touchpoints, including social media and email marketing.
• Monitor and respond to customer feedback and inquiries across digital platforms.

Administrative Support

• Assist in maintaining marketing documentation, such as reports, plans, and budgets.
• Coordinate with external vendors and agencies for marketing-related requirements.
• Any ad-hoc tasks assigned

Requirements

• Education: Currently pursuing a Diploma or Degree in Marketing, Communications, Business, or a related field. Fresh graduates are welcome to apply.
• Skills and Competencies:
• Strong written and verbal communication skills.
• Proficiency in social media platforms (e.g., Instagram, TikTok) and marketing tools (e.g., Canva, Adobe Creative Suite).
• Basic understanding of digital marketing and analytics tools (e.g., Google Analytics, Meta Business Suite).
• Creative mindset with an eye for design and detail.
• Strong organizational and multitasking abilities.
• Interest in fashion, retail, and lifestyle trends.
• Availability: Minimum commitment of 4-6 months for this full-time position.

What You’ll Gain

• Hands-on experience in retail marketing, campaign planning, and content creation.
• Opportunities to contribute to creative projects and events that make an impact.
• Exposure to key marketing strategies in a multi-label retail environment.
• A chance to develop valuable skills for a future career in marketing, branding, or communications.

Equal Opportunity Employer

At Singapore Fashion Council, we are committed to fostering a workplace that values diversity, equity, and inclusion. We believe that creativity and innovation thrive in an environment where diverse perspectives are celebrated.

We welcome applicants of all backgrounds, experiences, and identities, including but not limited to race, ethnicity, gender, age, disability, sexual orientation, and socioeconomic status. Our goal is to create an inclusive culture where everyone feels empowered to contribute their unique talents and skills.

As an equal opportunity employer, we provide fair and equitable opportunities for all individuals to grow and succeed in the dynamic fashion industry.

If you think you are the right fit for the role and wish to be part of the SFC team, we would love to meet you.

By submitting your Curriculum Vitae (CV)/Resume, you agree to your data being used in conjunction with recruitment and employment purposes.

In order to maximize your opportunities to work with us, you are encouraged to keep the information provided accurate, complete and up-to-date.

Our Data Protection notice for Job Applicants is attached here https://www.sgfashioncouncil.org.sg/privacy-policy/.

IMPORTANT

We do not collect any of the following:

• NRIC/FIN or any national identifiers.
• Photo
• Date of birth
• Age
• Spouse/Family information

or any other sensitive personal data that is not required at this stage of job application.

Please do NOT include these in your CV/Resume and we reserve the right to delete such data and/or reject any application that contains the above.

Note: Only Shortlisted Candidates will be notified

Duties & Responsibilities:-

• Responsible for project and site supervision, attend site meetings and co-ordinate with various stake holders, regulatory bodies, subcontractors and all related parties to ensure the smooth implementation/completion of project.
• Ensures completeness of documentation ie all changes to specifications/work scopes/drawings/etc are accurately documented.
• Assist in resolving challenges that may arise during project execution.
• Conduct regular site inspections and quality control checks.
• Ensure compliance of safety regulations in accordance to industry standards.
• Efficient management of resources and materials.
• Manage manpower and overtime costs to ensure optimal.
• Ad hoc duties as assigned.

Job Info:

• Working Days: Monday - Friday
• Working Hours: 8:30am - 5:30pm
• Location: North-East

Job Description:

• Design and implement software solutions for automated semiconductor process equipment.
• Enhance equipment performance by implementing Continuous Improvement Processes (CIPs) and other development initiatives.
• Provide field support for upgrades and resolution of customer issues.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified* We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280
Loh Kar Leong | EA Personnel No.: R23116015

Job Responsibilities:

• Identify project design hazards, construction risks, and constructability issues.
• Develop corresponding mitigation measures together with the project team.
• Chair regular risk mitigation meetings and training with clients and internal parties.
• Advise management on alternative safer and higher productivity construction methodologies.
• Review method statements and risk assessments for safety and construction compliance.
• Attend meetings related to construction progress, risks, etc.
• Any other duties as assigned by the Managements.

Job Requirements:

• Have reasonable exposure in safety and health for construction especially on transportation infrastructure projects in a similar nature
• Attended the Design for Safety (DfS) for Professional Course and passed the assessment or equivalent.
• A registered PE or Architect with a Practicing Certificate OR
• Minimum 10 years relevant experience in the design and the supervision of the construction of structures with at least 5 years in design which includes contributions to designs and writing specification
• Have a degree accepted by PE Board or Board of Architect and construction related degree accepted by Singapore Institute of Surveyors (SISV) and Society of Project Managers (SPM)
• Possess excellent leadership, planning, good management skills, interpersonal communication and negotiation skills
• Have experience in LTA projects have an advantage

- Location: Bedok

- 5days work

- Basic + AWS + VB

• To provide technical support to Project and Installation to verify report and coordinate over job site issues and provide technical solutions related to electrical design.
• To involve in design interfacing and parts provision.
• To participate in resolution of design problems related to Error/Trouble investigation, formulate corrective and preventive measures.
• To provide engineering support to Marketing and Sales staff for new products.

Requirement:

• Diploma/ Degree in Electrical/ Electronics Engineering or related discipline
• Prior experience/ knowledge in Electrical Design Work.
• Proficiency in AUTO-CAD.
• Computer literate and systems savvy.

HOW TO APPLY:

Interested applicants, please click on “Apply Now”or email [email protected]

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lim Wei Jye (Jaylyn)

EA Personnel Reg No: R24121213

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

NUS Centre for Additive Manufacturing (AM.NUS) is inviting applications for the position of research associate for polymeric biomaterials.

As a research associate in AM.NUS, you will be working on projects on the following areas:

• Synthesize new polymeric biomaterials for advanced bioinks.
• Undertake internal capability development projects and collaborative projects with researchers and industrial partners.
• Produce scientific research papers and grant proposals, and present in seminars, workshops, and conferences.
• Explore collaborations with researchers and industrial partners.
• Assist laboratory safety and procurement whenever necessary.

The NUS Centre for Additive Manufacturing (AM.NUS) leverages the National University of Singapore (NUS)’s world-class faculties, expertise and advanced capabilities in 3D printing technology, to bring innovative products to the field of healthcare that will improve patient outcomes and change lives for the better. AM.NUS will explore a whole new dimension in medicine, applying ground-breaking 3D printing technology for personalized patient treatments.
AM.NUS is the only multi-disciplinary Additive Manufacturing (AM) center in an Institute of Higher Learning in Singapore which comprises the following Faculties (Medicine, Science, Dentistry and Design & Engineering). The Centre is supported both internally by NUS and externally by National Additive Manufacturing Cluster (NAMIC).

Qualifications

• Master in Materials Science and Engineering/ Biomedical Engineering/Chemical Engineering/ Pharmacy or related field.
• Experience in polymer synthesis and characterization.
• Experience in cell culture techniques.
• Familiarity with 3D printing is an advantage.
• Proficiency in written and spoken English.

• 6 days alternate work week
• Working hours: 8:00 AM to 5:00 PM
• Working location: West or East Singapore, depending on project allocation.
• Project: Design & Build of industrial warehouse building

Job responsibilities:

• Review project specifications, technical clarifications and construction drawings.
• Carry out construction works scheduling, material requisition, cost control, project supervision and documentation to ensure compliance to regulatory.
• Co-ordinate with the Structural, Architectural and M&E staff to resolve related problems and issues.
• Ensure timely and smooth progress of works.
• To perform QA / QC role on area assigned and to ensure safety regulations are being compiled on site.
• Prepare various reports (progress report, project handover report and etc.).
• Any other duties that may be assigned.

Requirements:

• Degree in Civil Engineering and PEB recognized degree. Click here for your information.
• Preferably working experience with A1/A2 building company
• Entry level candidates in Civil Engineering are welcome to apply.

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy.

Daniel Lim | Registration Number: R24124455 | AlwaysHired Pte Ltd

EA Licence No: 24C2293

• Position : Procurement Coordinator (FROM Interior Design / Purchase Order/Project Costing)
• Location : Toa Payoh Industrial (Bus stop nearby)
• Working hours : 5 days a week - Monday to Friday from 9am to 6pm
• Salary (commensurate with experience) : Basic up to $3500 + Performance Bonus + 14 Days Annual leave
• Duration : Permanent
• Industry : Interior Fit-out Industry

Main Responsibilities:

• Implement procurement strategies, policies, and procedures.
• Identify and manage vendors, including contract development and compliance, and vendor performance
• Negotiate with suppliers on lead-time, cost and quality to obtain the maximum benefit for the company.
• Issue of Purchase Order, updating of Purchase Orders status and Project Cost updating.
• Exercises a good working knowledge of materials and sources of supply and makes purchases at prices consistent with quality and quantity requirements
• Other Ad hoc assignment by Superior.

Requirements:

• Knowledge of import and export regulations.
• Experience in vendor management and contract negotiation.
• Ability to work in a fast-paced environment and manage multiple projects simultaneously.
• Self-motivated and able to work independently with minimum supervision

Email to: [email protected] or call me at: 6398 5689 for more information.

Like us on Facebook or Instagram (For Career tips and Job vacancies): www.facebook.com/search.personnel / https://www.instagram.com/search.personnel

Join us on Linkedin: www.linkedin.com/company/search-personnel-pte-ltd

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jane Chua

Associate Consulting Director (APAC)

License no: 13C6684

EA Personnel: R2197224

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Job Responsibilities:

Design Job Responsibilities:

• Develop mood boards, design concepts, and presentations.
• Conduct design and fabric research, source materials, prepare prototypes, and oversee prototype development.
• Create technical drawings for sampling and presentation purposes.
• Collaborate with relevant teams on design development and production processes.

Marketing Job Responsibilities:

• Support the Manager in planning, executing, and managing marketing campaigns and activities.
• Manage relationships with external vendors for SEO and SEM strategies.
• Develop and manage social media and digital content calendars (e.g., Instagram, LinkedIn), aligned with the Marketing Calendar.
• Create and write content for marketing materials such as product catalogs, corporate presentations, promotional flyers, and advertisements.
• Contribute to photography for social media platforms and ensure website content is current and up to date.
• Stay informed about digital content trends, conduct market research, and perform competitor analysis.
• Assist in coordinating with media partners to secure brand exposure and relevant partnerships.
• Manage and update product information on the company website.
• Prepare weekly and monthly reports analyzing campaign performance and engagement.
• Perform other ad-hoc duties as assigned.

Requirements:

• Degree or diploma in communications, branding, marketing, or a related field
• Capable of assisting managers in preparing and delivering presentations.
• Proven creativity and project management capabilities.
• Strong verbal and written communication skills, with the ability to effectively engage with stakeholders across different divisions, countries, and entities.
• Motivated to explore new areas, adaptable, resourceful, and a strong team player.
• Solid understanding and experience in developing and managing corporate websites, social media (SNS), and other digital communication channels.

HOW TO APPLY:

Interested applicants, please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).
Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd
EA License No: 19C9950
EA Personnel: Nyon Hock Sen
EA Personnel Reg No: R24124070

• Responsible for USB2.0/USB3.0 device driver development, test, optimisation, and maintenance.
• Perform WHQL testing and certification of drivers and device frameworks.
• Take part in all phases of SDLC and prepare corresponding documentation.

Requirements:

• Degree in Computer Science/Engineering
• At least 5 years of USB device drivers’ development experience in Windows/Linux/mac/WinCE
• Good knowledge of USB2.0/USB3.0/ USBCV protocols and USB Device Classes (HID, MSC, CDC, UVC, UAC, DFU, Custom).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description:

We are seeking an experienced Design Manager to lead and oversee the design and development of Mechanical & Electrical (M&E) systems for environmental and waste management projects. The ideal candidate will ensure designs meet regulatory standards, project requirements, and sustainability goals.

Key Responsibilities:

• Manage and coordinate M&E designs for environmental and waste projects.
• Collaborate with multidisciplinary teams, including engineers, consultants, and contractors.
• Ensure compliance with regulatory and sustainability standards.
• Review and approve technical drawings, plans, and specifications.
• Provide innovative solutions to optimize project designs.

Requirements:

• Degree in Mechanical, Electrical Engineering, or related field.
• Proven experience in M&E design for environmental or waste management projects.
• Design in Autodesk products, primarily in Revit, Vault, and AutoCAD.
• Create and further develop drawing bases and REVIT families.
• Strong knowledge of regulatory standards and sustainable practices.
• Excellent leadership and project management skills.

License No: 23S1595

Registration No: R23116355

Senior Design Engineer

5 days
9am-6pm
25 Kallang Ave, Singapore 339416
Up to $7000

Responsibilities:

• Define requirements and features for semiconductor equipment
• Develop concepts and architecture of new equipment
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps and valves.
• Produce detailed engineering drawings
• Perform design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Improve design of legacy machines
• Application of analysis tools like Fish Bone Diagram, FMEA etc.

Requirements:

• Degree in Mechanical or Mechatronics Engineering
• More than 5 years of experience in semiconductor equipment design
• Good knowledge and experience in the following areas :
  1) Design of automation or semiconductor equipment
  2) High precision machine design
  3) Design of High Speed Pick and Place mechanisms
• Familiar with 3D CAD software
• Ability to plan, prioritize, and coordinate throughout the project cycle
• Equipment troubleshooting skills
• Ability to produce detailed Mechanical drawings and apply knowledge of Geometric Dimensioning & Tolerancing.

Tan Jia Jun | REG No: R23112681
The Supreme HR Advisory Pte Ltd | EA No: 14C7279

Interior Designer (SALES)

Working Days : Monday - Friday ( 9am - 6pm)

Location : Tiong Bahru

Salary: Basic $2000-$2800 + Comm

Job Description:

• Handle sales enquirers.
• Able to communicate with client to understand their need and built rapport.
• Provide advice on space planning, design conceptualization, materials and colour scheme specification.
• Manage project costing, preparation of quotation accordance to customer needs.
• Site Coordination and schedule the respective contractors & suppliers.
• Deliver the projects based on target time.

Requirements:

• Minimum 1 year experience preference.
• Adobe Illustrator/ Adobe Photoshop/ Autocad/ Sketch Up.

✅The Supreme HR Advisory Pte Ltd EA No: 14C7279

✅SAMUEL SIAW Reg No: R24124745

about the company

My client is a leading manufacturer of digital electronic products. With an outstanding international reputation in its field and a great emphasis on training & development, it is certainly a great brand to explore if you are seeking for greater achievement in your career

about the job

• Design and realization of the chip floorplan, clock architecture and powerplan
• In charge of physical design tasks from netlist to GDSII (P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability and tapeout)
• Lead analog designs during product development
• Physical design methodology of advanced process nodes and builds an automatic physical design platform

skills & experience required

• PhD / Master / Degree in Electrical & Electronics / Integrated Circuit / Microelectronics Engineering
• Min 4 years of hands on / research experience with digital backend ICs circuit design / physical design
• Well versed with synthesis, place & route, STA and design convergence
• Willing to work in a new start up entity in Singapore
• Proficient in tapeout experience at advanced technology will be a plus
• TCL,Perl,Python script development and familiar with EDA tool design

If you are interested in the position , kindly send your CVs in to yitwei.kwan(@)randstad.com.sg

Please include your availability, expected salary and reason for leaving current job

We regret that only shortlisted candidates will be contacted

EA: 94C3609 / Reg: R1325913

• Identify project design hazards, construction risks, and constructability issues.
• Develop corresponding mitigation measures together with the project team.
• Chair regular risk mitigation meetings and training with clients and internal parties.
• Advise management on alternative safer and higher productivity construction methodologies.
• Review method statements and risk assessments for safety and construction compliance.
• Attend meetings related to construction progress, risks, etc.
• Any other duties as assigned by the Managements.

Requirement:

• The Risk Management Facilitator should have minimum Ten (10) years of relevant experience and exposure in safety and health for construction especially in deep excavation and pipe jacking projects of similar scale, nature and complexity.
• Shall be registered as a DfS Professional (DfSP) under the Workplace Safety and Health Council (WSHC) of Singapore and must be trained in hazard identification and risk assessment methodology.
• The RMF shall also be a registered Design for Safety Professional (DfSP) with WSH Council, and experienced as a DfSP in relevant projects and submit track records for which he/she is the appointed DfSP, clearly stating the duration of appointment and which stages in the project he/she is involved in.