Position Overview:

As design verification engineer, you would be part of a passionate verification team that is constantly pushing the limits – developing and deploying state-of-the-art verification methodologies in ever-increasing design complexities, from UVM, C/C++ co-simulation, system emulation to mixed-mode simulation & formal verification. The goal is simple – to achieve zero-defect with the best and smartest approach to the large verification space.

Requirements:

1. Experience in UVM verification methodology

2. Disciplined, quality-minded, and highly driven for excellence,

3. Excellent team player and good communication skills

4. MSEE/BSEE in Electrical Engineering or Computer Engineering, with 3 years of relevant experience, but are open to fresh graduates with outstanding results

5. Candidates with relevant experiences would be offered as Senior or Staff, taking on higher responsibilities

6. Experience in video processing and video analytics is a plus

7. Passionate and strong in general programming is a plus

Purpose of Role:

This person is responsible for ship electrical detail design activities and able to process basic design information to expand the function design into production information for the marine vessel.

This role shall perform engineering of electrical and navigation equipment to the related platform equipment, as well to interface with Ship Management System (SMS). The scope includes :

o Main Power generation and distribution system network and architecture

o Integrated electric propulsion systems, Power management systems

o Engineering integration between ship equipment / Ship Monitoring system with Electrical power generation

o Electrical fittings, equipment and panel arrangement

o Preparation of equipment connection and cable schedules

o Electrical design calculation

Responsibilities:

• Responsible for vessel electrical system detail design in accordance with Marine Classification and regulatory, as well as IMO/Solas

• Review vendors technical proposal to ensure solution meets the functional requirement

• Responsible for ensuring the Contractual technical requirement and Classification requirement of automation related design are fulfilled and within project schedule.

• Liaise with client and other internal engineering trades for project coordination.

• Attend technical review and meetings with client and vendors during project execution to ensure requirement are fulfilled, technical solutions are discussed and technical issues resolved.

Knowledge and Skills:

• Knowledge of Marine Electrical and Automation systems

• Knowledge in Autocad, Naviswork, ETAP and CADCAM 3D software will be advantageous

Requirements:

• 3 years of related experience in Ship design related engineering industries such as Marine & Offshore
• Degree in Electrical, Automation, Mechatronic or any related engineering field
• Good Interpersonal Skills, Problem-Solving skills and is a team player.
• Good time management and able to meet tight deadlines.

Other Information:

• Location: 16 Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am to 5.00pm

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Tasks and Responsibilities

• Assist Section Project Lead in day to day operations.
• Perform the assigned mechanical task under quality and schedule.
• Advise the project’s design mode & standard
• Familiar with Class regulation/rules, product, standard
• Report the project daily discipline (Man-hour/Schedule etc.)
• Able to work with other team members for the overall progress of the project
• Feedback for profession’s design mode & standard
• Train & Guide the other project mechanical engineer (AE or draft man) to work together.
• Study & Solve the project issues under mechanical responsibility
• Attend and report in project and section meeting
• Complete the assigned task for different project drawings or documents.
• Support Project Section Lead in Mechanical Technical issue.
• Coordinate with Shipyard /Consultant / Vendor
• Responsible to Mechanical Project Section Lead/ Mechanical Technical Lead
• Project Handling- New building project, Repair, Upgrading, Conversion project.

Job Requirements

• Minimum 5 years of relevant work experience in the marine/offshore industry Machinery/ Piping new-building engineering design.
• Familiar with Auto-CAD/ Microsoft Office/ AVEVA
• Familiar with Rules and Regulation from Classification Society and Authorities.
• Familiar with theory and calculation of marine/offshore Mechanical & Piping Design.

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Task Management:

• Preliminary vessel concept work for tendering
• Prepare 2D & 3D drawings/models for construction
• Engineering system calculations to various classification society rules
• Preparation & review of production drawings for construction
• Follow approved company processes as defined in the Strategic Marine Business Management System
• Assist in the development of design office standards / procedures
• Able to take on project management tasks
• Ensure OHSE policies & guidelines are carried out

People Management:

• Provide technical and professional support to junior staff

Interpersonal Management:

• Liaise with Project Managers and Designers
• Liaise with class and flag societies
• Liaise with customers to meet contracted requirements
• Liaise with external design organisations
• Liaise with production departments to provide technical support

Information Management: (Will this person be handling paperwork e.g. reports, forms, invoices, drawings, documentation, etc? What will this involve?)

• Provide regular communications to the Design Manager
• Attend Design & Project meetings and conference calls
• Provide info on work accomplished for B.O.D. reports on monthly basis to the Design Manager
• Ensure proper filing and documentation of drawings, calculations & other project documents in the design server
• Maintain an accurate project design register
• Provide weekly timesheets to Accounts and Design Manager

Personal Management: (How will this person have to behave to be successful in this job e.g. Honest, Reliable Punctual?)

• Open, respectful & approachable
• Act with integrity and honesty
• Continue to develop skills and industry knowledge through a variety of means
• Ability to work unsupervised to meet deadlines
• Flexibility and ability to multi-task
• Ability to mentor and develop junior staff
• Passionate about boats and a desire to work on a range of vessel types

Job Responsibilities:

1. Assisting and supporting technical sales team in terms of scope of supplies and costing with respect to electrical, automation requirements during the prospecting stage for water/wastewater related systems and projects.
2. Liaising and communicating with agents/distributors/OEM partners/end-user customers on technical details and specifications of parts and components where EICA works are concerned.
3. Design and producing electrical, control panel drawings (AutoCAD or Eplan), BOM list generation and hardware component selection.
4. Developing PLC programming & HMI project (Siemens /Allen Bradley etc) for all process and functional controls of water/wastewater related systems and instrument.
5. Liaising, negotiating, and managing sub-suppliers/sub-contractors in Singapore and in the region with respect to procurements of all wiring and cabling works, fabrication and assembly of control panels for systems as well as for in-situ installation of water/wastewater related systems or projects.
6. Determining and monitoring procurement and production progress and schedules where cabling and wiring works, control panels’ PLC works and supplies are concerned.
7. On site electrical installation supervision, electrical panel testing, instrumentation configuration, loop test and automation commissioning works.
8. Compiling and handing over operation and maintenance (O&M) manuals (electrical and PLC portions etc) to our agents/distributors and end-user customers.

Requirements:

• Diploma / Degree in Electrical Engineering or Computer Science.
• Good Interpersonal relationship and communication skills with proficiency in spoken and written English.
• Minimum 5 to 8 years of working experience in Water Industry or engineering projects would be advantageous.
• Knowledge of PLC programming (Siemens /Allen Bradley etc)
• Willingness to travel locally or to regional countries occasionally for site installation, trouble-shooting or testing and commissioning duties at clients' project sites
• Able to work independently and a good team player.
• Senior position will be considered for candidates with more experience.
• Candidate who are able to start work within short notice or immediately would be advantageous.

Basic information:

• Location: Downtown
• Working hours: Monday to Friday, 9am to 6pm
• Basic + AWS + Performance Bonus + $500 per annum Medical Claim

Job Description:

• Mood boards, design development and presentation.
• Design and fabric research, sourcing, preparing prototype and prototype development.
• Create technical drawings for sampling and presentation.
• Liaise with relevant parties on development and construction.
• Manage fabric and trims library.

Job requirement:

• Diploma or Degree in Fashion Design or related discipline.
• At least 3 years of relevant experience in fashion design.
• Knowledge in textile, garment construction, design and development.
• Proficiency in Photoshop and Illustrator.

For interested candidates, please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform that only shortlisted candidates would be notified*

We wish you all the best in your career search.

Zen Career Pte Ltd | 24C2559
Wong Kaili (Kylie)| R21100484

School of Electrical and Electronic Engineering is one of the founding Schools of the Nanyang Technological University. Built on a culture of excellence, the School is renowned for its high academic standards and research.

With over 3,000 undergraduates students and 1,000 graduate students it is one of the largest EEE schools in the world and ranks 10th in the field of Electrical & Electronic Engineering in the 2024 QS World University Rankings by Subjects.

Today, the School has become one of the world’s largest engineering schools that nurtures competent engineers and researchers. Each year, the School graduates over a thousand students who are ready to take on great ambitions and challenges.

For more details, please view: https://www.ntu.edu.sg/eee

We are seeking a motivated and skilled Project Officer to contribute to the design and simulation of high-efficiency DC-DC converters and RF power amplifiers.

This role involves working on innovative solutions in the field of analog/RF/power management IC.

Key Responsibilities:

• Design, implementation and testing of DC DC converters and other related analog/mixed signal ICs. Development cycle including circuit design, simulation, modeling, layout, verification and measurements.
• Design state of the art DC DC converters that include op amps, comparators, bandgap, low-drop linear regulator, ADCs, switching power stage, etc
• Design of high power-efficiency RF power amplifiers
• Prepare research papers/reports/technology disclosures, etc

Job Requirement

• Bachelor’s Degree in IC design or related field
• At least 2 years of relevant experiences in IC design/Electronics
• Familiarity with Analog/Power Management/RF IC design and Cadence software
• Good written and oral communication skills
• Proficiency in Cadence, Python or Matlab
• Ability to work independently and deliver solutions within strict timelines
• Attention to detail, with excellent organizational and time management skills
• Entry level candidates are welcome to apply

We regret to inform that only shortlisted candidates will be notified.

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

To handle & manage the coordination of all Southeast Asia store planning projects.  Assist the management in the search of project negotiation with relevant landlords, vendors and partners.  Oversee the construction and completion of each location to ensure standards of quality are met in a timely and cost-effective manner while keeping AP Standards.

Responsibilities

• Responsible for implementing ISP Algorithm into HW using Verilog, SystemVerilog and/or SystemC (High Level Synthesis)
• Define ISP HW Architecture based on product features and performance requirements, also with gate count and power estimation
• Verify Logic at ISP level and Digital System level
• Optimize Design for less gate count and low power consumption
• Drive ISP Design activities in close collaboration with ISP Algorithm Team, ISP Design leaders in other sites, and Digital System Design Team
• Leading, supervising and mentoring a team of RTL design engineers

Requirements

• Minimum MSEE, or BSEE, or equivalent, plus 7+ years of Digital Design and verification related experience
• 3+ years project management / people management experience / skill
• Experience / knowledge in CMOS Image Sensor and image signal processing (ISP)
• Experience / knowledge in System C/C++, System Verilog, and Catapult HLS tool.
• Ability to lead teams and collaborate effectively with people in different functions
• Strong time management skills to ensure timely completion of deliverables
• Good communication and interpersonal skills
• Result oriented and embrace change behaviours

Responsibilities

• · Leading Process Design Team for Oil & Gas Projects and guide a team of about 10 Process Design Engineers / Designers to finish the Process design (start from Basic design to Detail Design) of the project.
• · Leading a Team of Process Engineers & Designers in Preparation & Review of PFD, P&IDs, MSD, PSD, Hydraulic calculations, Equipment sizing calculations, BOG calculations, Heat Loss calculations, Tank Venting calculations, Tank capacity calculations, Heating coil calculations, PSV calculations, Process data sheets for Equipment’s such as pumps, compressors, Refrigeration unit, Tanks, Process data sheets for Instruments such as control valves, PSV, PT, TT, LT, Flow meter, Process line list, Heat & Material Balance, HAZOP & SIL Study, Operation Manual, Process control Narrative, Cause & Effect Diagram, Surge Analysis.
• · Review & Checking of Process Documents such as PFD, MSD, P&IDs, Hydraulic Calculations, Process Data Sheets, Surge Analysis, Design Calculations etc to ensure that all the Process documents comply to applicable Codes & Standards and Project Requirements
• · Review & Checking of Surge Analysis report using Pipenet Transient Module for product loading/unloading operation, fire water network systems etc.
• · Review & checking of various process philosophies like Process Control Philosophy, Operation Philosophy, Cause and Effect diagram, Flare and blowdown philosophy, isolation philosophy, Vent & Drain philosophy, shutdown philosophy.
• · Participation in Design Review, HAZOP Study, SIL Study, HAZID Study, ALARP, Bow Tie, MAHM, RAM Study, Alarm Rationalization workshop, SIMOPS, Constructability review carried out during various stages of project.
• · Review Hazop Report, SIL Assessment & Verification Report & Responsible for Closure of all Hazop & SIL Study Recommendation
• · Preparation & Implementation of checklist for all Process Documents
• · Management of Process Discipline Engineers Team for development of Process Design of Major Projects from feasibility studies through Conceptual Design to Detail Engineering.
• · Pre-Bid, FEED & Detailed Design documents review.
• · Maintain Design integrity and quality within the Process Engineering Team.
• · In-house Engineering Activities and Process Engineering Man Hours Estimation and Schedule.
• · Preparation, Monitoring and Control of Process Engineering Document Control List and expedite for delay/ approvals/resolution of open issues.
• · Responsible for Process Engineering Execution Methods and Procedure, Process Engineering Disciplines Co-ordination, Process Engineering Deliverables delivery for Project Execution, Process Man-hours Monitoring, Attending design review Meetings with Clients and Package vendors, PSSR+HAZOP+SIL study.
• · Inter Discipline Review of other Discipline Documents including vendor documents, GA drawings, Instrument data sheets etc for consistency, quality and Design Integrity.
• · Review of Authority submission documents like Fire Fighting Calculations (Fire & Foam network hydraulic and Surge Analysis, Fire Fighting Design Philosophy).
• · Development & Review of automated excel spreadsheets for process calculations.
• · Preparation, Monitoring and Control of Engineering Document Control List and expedite for delay/ approvals/resolution of open issues.
• · Review and ensure that all Process works are carried out in accordance with project specification. Maintain Design integrity and quality within the Process Engineering Team.
• · Preparing Process Engineering schedule and Process Engineering Man hours estimation to meet project requirements.
• · Co-ordinate with other Discipline for Process Inputs and ensure seamless Inter Discipline co-ordination between Process and other Discipline.
• · Job assignments, Mentoring and Supervision of works for Process Designers and Design Engineers.
• · Technical assistance to construction activities and attending to Site Queries.
• · Reviewing Vendor Drawings for Equipment’s and Instruments in terms of Process.
• · FEED & Pre-Bid works which involves Feasibility study.
• · Participates in discipline and inter-discipline design check and screening meetings for compatibility, completeness, and correctness in works.
• · Implement HSE objectives, policy, and company HSE procedures within his authority limit.
• · To integrate Risk-based thinking and HSE considerations into business decisions, plans and operations with the commitment to eliminate and reduce HSE hazards, aspects and risks.
• · To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.
• · To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects, and risks.

Requirements

• · Preferably Bachelor’s Degree in Chemical Engineering
• · Preferably to 15 years in Oil & Gas industry

Software Requirements

• · Proficient in Pipenet, Hysis, MS Excel, MS Word

Code Knowledge

• · API 2000, API 520, API 521, API 526, API 2350
• · SS 532
• · NFPA 11, NFPA 13, NFPA 15, NFPA 20, NFPA 30

Job Description

• Oversee in-house engineering design works of ACMV system, including detailed design, heat load calculation, shop drawings, hydraulic calculation, duct/pipe sizing, equipment selection, etc.
• Manage ACMV design coordination with other trades with BIM coordination.
• Liaise with ACMV suppliers for quotation, responsible for equipment selection, technical and commercial evaluation.
• Responsible for material submittals for ACMV equipment and materials to the Consultant for approval.
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all ACMV equipment and materials.
• Attending technical coordination meetings with Main-con, Consultants and Employer.
• Assist Project Manager and site personnel in planning, execution, and completion of projects.
• Liaise and work closely with the Consultant, Employer, site supervisor and workers on the progress of M&E work to meet the project schedule.
• Assist in the preparation of progress payment claims and variation orders as required.
• Prepare documentation and carry out testing and commissioning, combined services testing for TOP/CSC.
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards.
• Participate in tender preparation works for new projects.

Requirements

• Minimum bachelor’s degree in mechanical engineering
• Min 5 years Singapore-based ACMV experiences in Construction Industry.
• Proficient in AutoCAD and Revit.
• Experience and relevant knowledge in ACMV calculations including heat load, pump sizing, air flow rate, chilled water system performance, chiller sizing and configuration, fan sizing and more.
• Experience of design and coordination skill.
• Familiar to ACMV, Green Mark and fire code requirement with knowledge of basic design and necessary submission for tender bidding and construction, TOP and CSC.
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges.
• Experience in Consultant Company preferred.
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage.

Job Description

Sea Forrest Engineering Pte Ltd (a subsidiary of BH Global Corporation Ltd) seeking a skilled and experienced Electrical Design and Commissioning Engineer to join our dynamic team specializing in marine vessel electrical propulsion and energy management systems. The ideal candidate will have a strong background in electrical engineering, a deep understanding of marine systems, and a proven track record of designing and commissioning complex electrical systems for marine vessels. This role will involve working on cutting-edge technologies to enhance the performance, efficiency, and reliability of propulsion and control systems for various types of marine vessels.

Responsibilities

1) Electrical Design

• Collaborate with cross-functional teams to define electrical system requirements, specifications, and design criteria for marine vessel propulsion and control systems.
• Develop detailed electrical schematics, wiring diagrams, and layouts using industry-standard design tools.
• Select appropriate electrical components, equipment, and materials to ensure compliance with safety, regulatory, and performance standards.
• Design and implement control logic, automation, and monitoring systems for propulsion and manoeuvring.

2) Commissioning and Integration

• Oversee the installation, integration, and testing of electrical systems on marine vessels during construction or retrofit projects.
• Conduct thorough testing, troubleshooting, and validation of electrical systems to ensure proper functionality and adherence to design specifications.
• Collaborate with shipyard personnel and subcontractors to ensure proper installation and alignment of propulsion and control components.
• Coordinate with project managers to establish commissioning schedules, manage resources, and ensure timely project completion.

3) System Optimization and Performance Enhancement

• Analyse and evaluate the performance of propulsion and control systems, identifying opportunities for optimization, efficiency improvement, and performance enhancement.
• Work closely with the research and development team to implement innovative technologies and solutions to address emerging challenges in marine propulsion and control.

4) Documentation and Reporting

• Create comprehensive technical documentation, including operation manuals, maintenance guides, and as-built drawings for electrical systems.
• Generate commissioning reports, test procedures, and status updates for internal teams, project stakeholders, and clients.

5) Regulatory Compliance and Safety

• Ensure that all designed and commissioned electrical systems comply with relevant maritime regulations, industry standards, and safety guidelines.
• Collaborate with regulatory bodies and classification societies to obtain necessary approvals and certifications for electrical systems.

Requirements

• Diploma or Bachelor's degree in Electrical Engineering or related field.
• Proven experience (5+ years) in electrical design and commissioning, preferably in marine propulsion and control systems.
• Proficiency in electrical design software (e.g., AutoCAD Electrical, EPLAN) and simulation tools.
• Strong knowledge of marine electrical systems, power distribution, propulsion methods, and control strategies.
• Familiarity with marine industry standards (e.g., ABS, DNV, IMO) and relevant regulations.
• Excellent problem-solving skills and ability to troubleshoot complex electrical issues.
• Effective communication skills for collaborating with multidisciplinary teams and presenting technical information to clients and stakeholders.
• Project management skills with the ability to manage priorities, timelines, and resources effectively.
• Willingness to travel to shipyards and vessels for commissioning activities.
• Willingness to travel overseas as required.
• Positive with a can-do attitude.

Interested candidates, do send your resume to [email protected]

**Shortlisted candidates will be notified through email for an interview.

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description

• Oversee in-house engineering design works of Fire Protection (Sprinkler, Hose Reel, Fire Hydrant, Dry Riser, etc) and Plumbing and Sanitary system, including detailed design, hydraulic calculation, shop drawings, pipe sizing, equipment selection, etc.
• Manage Fire Protection & Plumbing design coordination with other trades with BIM coordination.
• Liaise with Fire Protection & Plumbing suppliers for quotation, responsible for equipment selection, technical and commercial evaluation.
• Responsible for material submittals for Fire Protection & Plumbing system to the Consultant for approval.
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all equipment and materials.
• Attending technical coordination meetings with Main-con, Consultants and Employer.
• Assist Project Manager and site personnel in planning, execution, and completion of projects.
• Liaise and work closely with the Consultant, Employer, site supervisor and workers on the progress of M&E work to meet the project schedule.
• Assist in the preparation of progress payment claims and variation orders as required
• Prepare documentation and carry out testing and commissioning, combined services testing for TOP/CSC.
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards.
• Participate in tender preparation works for new projects.

Requirements

• Minimum bachelor’s degree in mechanical engineering
• Min 5 years Singapore-based FP & Plumbing experiences in Construction Industry.
• Proficient in AutoCAD and Revit.
• Experience and relevant knowledge in FP & Plumbing calculations including pump sizing, hydraulic calculation, tank sizing and more.
• Experience of design and coordination skill.
• Familiar to fire code requirement with knowledge of basic design and necessary submission for tender bidding and construction, TOP and CSC.
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges.
• Experience in Consultant Company preferred.
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

Role Purpose

This role will have the opportunity to work with a dynamic international team in a fast-paced environment to push the boundaries of digital storytelling, while elevating and amplifying the NBCUniversal brand within the media and advertising industry.

Essential Responsibilities

Your responsibilities may span the following areas:

• Support design team in the delivery and execution of 360 commercial content solutions across digital, social and TV.
• Support live commercial productions: designing of creative assets, ad banner creation, branded content design, PowerPoint Presentation designs
• Support with the development of design mocks
• Work with the broader Catalyst team to ensure optimal pitch to deal conversion rates and repeat clients

Responsibilities:

• Mentor a team of engineers in Basic design to carry out Hull form and General arrangement development, Hydrodynamic and stability calculations for a tender or ongoing projects.
• Assist in the development of new products.
• Support other in-house departments and external parties, where required, by providing specialist technical advice and information.
• To generate list of drawing/document specific to each project.
• Prepare technical specifications for equipment procurement (e.g. major deck equipment) and perform technical evaluation of vendor’s bid.
• Carry out naval architectural calculations, hydro dynamic analysis, stability calculations.
• Prepare and review layout arrangement in accordance with building specification, rules, and regulations (fire, watertight integrity, accommodation layouts…)
• Manage and check technical information of external suppliers of equipment and systems and coordinate/cooperate with engineers from other trades in the organization.
• To check and approve calculation/drawings and material list and ensure that they conform to contractual technical specifications, installation control documents, Classification and Statutory Rules/Regulations.
• Participate in tests and trials, where required.
• Liaise with ship owners and surveyors.
• Ensure that all design issues raised by owner, Class and Flag on drawings and documents are timely and properly captured in Action Item Register for follow-up actions.
• Keep abreast with current technological developments and products.
• Keep abreast with Classifications Rules, military and industrial standards relevant to design activities.

Requirements:

• Degree in Naval Architecture/ Marine Engineering or Structural Engineering from a recognized University
• Strong knowledge of international design codes, Classification/Statutory Rules, and Regulations.
• Possess Engineering Design and Project Management skills
• Strong Leadership and Interpersonal skills to manage assigned team members and other stakeholders
• Strong experience in Naval architecture, Structure, Outfitting, Accommodation design
• Proficiency in AutoCAD, Aveva Marine, NAPA, Microsoft office, Rhino 3D, CFD software knowledge
• High proficiency in 3D modeling skills using 3D CAD software will be an advantage.
• At least 10 years’ experience in engineering design in Marine/Offshore/Oil & Gas industry or Classifications Societies

Other Information:

• Location: 16 Benoi Road(Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am to 5.00pm

BASK was started (in June 2020) with a single objective: to offer luxurious silk products at a revolutionary price.

We make ethically sourced silk bedding products, eye masks, and fashion hair accessories.

If you would like to play a part in introducing mulberry silk products to the younger generation so that they can witness its benefits for their hair and skin too, we want to hear from you.

For this role, we are seeking a highly motivated and creative intern in the field of graphic design, social media to assist in product design and daily content creation.

Content Creation:

• Curate creative ideas and generate engaging video content for different social media platforms.
• Create daily content including photos, videos, edits, and copywriting on our Tiktok, Instagram and other social media accounts
• Utilise your video editing skills to produce high-quality content that resonates with our target audience and drives engagement.
• Plan, curate, and execute the media calendar, ensuring timely and consistent content delivery across all platforms.

Graphic Design:

• Curate, research and develop concepts and layouts for our new products, packaging and marketing materials, websites, social media postings and other media collaterals.
• Assist in day-to-day administrative tasks and support for product listings creation, e-commerce storefront layout design update etc.

Ideal candidate should have:

• A good eye for design
• Attention to details
• Strong sense of responsibility and initiative
• Able to multi-task and work independently, as well as in a team
• Comfort working with Adobe Creative Suite, particularly Photoshop, InDesign, and Illustrator
• Reside in Singapore

Responsibilities

• Supervise and coordinate the activities of site contractors;
• Monitor job progress and ensure that civil contracted works meets all practical, commercial, requirements of productivity, quality and contract target completions;
• Ensure all Structural work is carried out within established budgets and schedules;
• Ensure all design work conforms to the codes and standards used by the client, or to agreed industry standards.
• Implement and oversee site projects assigned to ensure smooth project execution
• Manage internal and external contractors well to ensure quality of work and scope of work is within specifications.
• To coordinate with subcontractors/suppliers to execute contract works.
• Responsible for all inspection activities being carried out.
• Assist in planning, schedule and technical support to PM.
• Ad- hoc duties assigned

Requirement

• LOCAL Fresh grads are welcome to apply
• Degree/Diploma in Civil Engineering
• Independent, diligent, and highly motivated with excellent team spirit.
• Excellent communication skills
• 5.5 day work week

Roles & Responsibilities

Plan, lead and supervise upgrading works, addition and alteration works

Lead a team of supervisors and workers and oversight of manpower for project execution

Ensure designs / drawings meet relevant code and compliance requirements, and good engineering practices

To attend site matters / discussions to resolve technical / site issues and progress matters

Continuing to improve all installation works schedule and quality of work through proper planning of work method, materials procurement and selection, and efficient site management

Monitor and control project schedule, materials delivery and budget etc

Liaise coordinate with clients, consultant, project supervisors and sub-contractors on project related issues and to ensure project objectives are met

To supervise and ensure works are in accordance to the contract drawings and specifications

Establish and maintain a detailed tracking and filing system of all documents

To prepare, submit Variation Claims with instruction documents & part-plan from client

Maintain all filing systematically & uploading of softcopies in the system

To place materials order to Purchaser in advance as per Order list as per site requirement

Responsible for ensuring implementing safety measures

Only qualified candidates will be notified for interviews.

Job Description & Requirements

• Supports technical solutions
• Recognizes problems that are beyond capabilities and is learning from the experts in the area
• Supports new capital equipment purchases and implementation
• Supports cell layouts and process improvement initiatives
• General understanding of Six Sigma and lean tools to improve processes
• General understanding of Design for Manufacturability and Assembly (DFMA) concepts and supports new product introduction
• Represents the company with our customers
• Supports updates to management on operations status
• Learns the steps involved to incorporate process improvements
• Supports the manufacturing floor for any process related questions
• Creates and maintains process documentation and updates work order documentation
• Supports implementation of basic engineering changes
• Adheres to applicable Quality System requirements
• Supports Process Flow Charts, PFMEA, and Control Plans
• Learns from more senior Operations Engineers. May guide/direct Manufacturing Specialists.