Job Description:
We are looking for a highly skilled Physical Chip Design Engineer to lead the development of low-power and high-performance chip design processes. This is a critical role that requires deep expertise in advanced semiconductor technologies and the ability to drive full-chip physical design workflows from start to finish.

Key Responsibilities:

• Low-Power Physical Design Workflows: Lead and optimize processes to enhance energy efficiency while maintaining chip performance.
• Full-Chip Floor Planning & Place-and-Route: Oversee floor planning to ensure optimal performance, power, and area. Manage place-and-route processes for efficient, functional designs.
• Power Network Design & Analysis: Design and optimize power distribution networks, perform grid analysis to ensure power integrity and low-power design.
• Timing Closure, Power Integrity, & Signal Integrity: Resolve timing challenges, ensure power and signal integrity signoff, and perform necessary optimizations.
• Physical Verification (DRC & LVS): Conduct thorough physical verification, including Design Rule Checks (DRC) and Layout Versus Schematic (LVS) to ensure compliance with design specifications.

Qualifications:

• Education: Bachelor’s degree or higher in Electronics, Electrical Engineering, Computer Science, or related field. Advanced degrees (Master’s/Ph.D.) are a plus.
• Experience: 4-5 years of hands-on experience in physical design, with expertise in low-power, high-performance chip design. Experience with 12nm and below semiconductor technologies and tape-out processes is essential.
• Technical Skills:
  • Expertise in full-chip floor planning, place-and-route methodologies, and physical verification (including DRC and LVS).
  • In-depth knowledge of power network design, IR drop analysis, and timing closure.
  • Proficiency in Synopsys IC Compiler, Cadence Innovus, or similar tools.
  • Proficiency with Static Timing Analysis (STA) tools.
• Programming Skills: Strong scripting skills in Perl, TCL, Python, and C++.

Job Summary:

We are looking for an Architecture Design Engineer to focus on the development and optimization of AI Chip hardware systems. This highly technical role involves designing simulators, optimizing AI chips at various levels, and developing front-end code to ensure AI chip functionality and performance.

Key Responsibilities:

• Simulator Design:
  Utilize tools like GEM5 to design and develop simulators for AI chips, ensuring accuracy and efficiency in simulating chip behavior across various workloads.
• Performance Optimization:
  Optimize AI chips at:
  • Algorithm Level: Enhance computational algorithms for efficiency.
  • Architecture Level: Design and refine the overall chip structure.
  • Circuit Level: Improve low-level electrical performance.
• Front-End Code Development:
  Write, test, and optimize front-end code for AI chip functionality, ensuring compatibility with the chip’s architecture.

Qualifications:

• Educational Background:
  Minimum Bachelor's degree in Computer Science, Electronics, or a related field. Advanced degrees are a plus.
• Technical Knowledge:
  • Strong understanding of computer architecture and AI hardware accelerators (e.g., GPUs).
  • Familiarity with memory access patterns in AI models and effective memory handling.

We are a team of self-motivated and forward-thinking product and engineering experts, continuously pursuing excellence in our product, technology, and development process that drives efficiency and success across our company. With our mission to enhance organizational capabilities by driving future-forward workplace solutions, we strive to be the go-to team for the best enterprise products.

Job Description

• Software development driven by stakeholder-focused requirements, including effort estimation, solution design, implementation, code review, performance optimization, documentation, monitoring, and bug resolution.
• Communicate with other teams during the analysis and development stages.
• Collaborate with the backend team members on the design and implementation stages.
• Prepare infrastructure and deployment plans to bring features alive.
• Develop and ship cloud-native applications.
• Design and deploy cloud infrastructure.
• Write unit, functional, and end-to-end tests.
• Write understandable, testable, and maintainable code.
• Develop new and maintain the existing features.
• Improve scalability and performance of the existing services.

Job Requirements

• Bachelor's degree or higher in Computer Science or a related field from a reputable university.
• In-depth understanding of computer science fundamentals (data structures and algorithms, operating systems, networks, databases, etc.).
• Relevant backend experience (working experience or internship) using Go or Python.
• Familiar with OOP, Restful API design, and relational database design.
• Familiar with Linux development environments, docker, and Nginx.
• Passionate about coding and programming, innovation, and solving challenging problems.
• Experience in web security is preferred.
• Experience in design and development of large-scale distributed systems is preferred.

Under administrative supervision of the Technology, this position is responsible for the deployment and maintenance of a cloud-based applications infrastructure.

Responsible for deploying, automating, maintaining, troubleshooting and improving the systems that keep the backend infrastructure running smoothly. The role requires you to have hands-on technical experience and a can-do approach towards environment automation / management and continuous improvement.

Job Duties:

• Deploying, automating, maintaining, and managing AWS cloud-based production system, to ensure the availability, performance, scalability and security of productions systems.
• Build, release, and configuration management of production systems.
• Pre-production Acceptance Testing to help assure the quality of our products / services.
• System troubleshooting and problem solving across platform and application domains.
• Suggesting architecture improvements, recommending process improvements.
• Ensuring critical system security using best in class cloud security solutions.
• Evaluate new technology options and vendor products.

Skills and Requirements:

• Bachelor’s degree in computer science or other equivalent technical discipline.
• 1+ years’ experience with using a broad range of AWS technologies (e.g., EC2, RDS, ELB, EBD, S3, VPC, Glacier, IAM, CloudWatch, KMS) to develop and maintain an Amazon AWS based cloud solution, with an emphasis on best practice cloud security
• AWS Certified Solution Architect (Associate) is preferred.
• Conversant with infrastructure definition tools such as Cloud Formation and Terraform
• Experience as a DevOps Engineer in a 24x7 uptime Amazon AWS environment, including automation experience with configuration management tools.
• Scripting Skills: Strong scripting and automation skills.
• Operating Systems: Windows and Linux system administration.
• Monitoring Tools: Experience with system monitoring tools.
• Problem Solving: Ability to analyze and resolve complex infrastructure resource and application deployment issues.
• Experience with other Clouds such as Azure or GCP can be considered.

Note: Proceeding to apply on this job post means you have read, understand and agreed to WPH DATA PROTECTION NOTICE FOR JOB APPLICANTS in the link below.

https://www.wphdigital.com/notices

Job Description

• Supervise and coordinate the activities of site contractors;
• Monitor job progress and ensure that civil contracted works meets all practical, commercial, requirements of productivity, quality and contract target completions;
• Ensure all Structural work is carried out within established budgets and schedules;
• Ensure all design work conforms to the codes and standards used by the client, or to agreed industry standards.
• Implement and oversee site projects assigned to ensure smooth project execution
• Manage internal and external contractors well to ensure quality of work and scope of work is within specifications.

Requirements

• Degree in Civil/Structural Engineering recognised by the Professional Engineers Board Singapore
• Min 5 years of HDB new build or JTC projects relevant working experience
• Good communication skills and a team player
• Positive working attitude and highly adaptable

Job Description & Requirements

- Job title will be Project Engineer and the duties are providing technical advice, supervising staff on site and ensuring that their packages are completed on time and within budget.

- Managing the Project

- Monitoring the workers

- Work at any construction site

- Prepare the progress report

- Report to the director

Job role:

1. Works with the front-end design team to complete the chip floorplan , clock

architecture, and powerplan .

2. Takes charge of the physical design tasks from the Netlist to the GDS2, including P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability (DFR) and tapeout.

3. Researches the physical design methodology of advanced process nodes, and builds an

automatic physical design platform.

Position Requirements:

1. Holds a bachelor's degree or above in electronic engineering, microelectronics, or computer science.

2. At least 3 years of work experience in the digital backend design field.

3. Hands-on project experience is required.

4. Tapeout experience at advanced technology is prefered.

5. TCL , Perl or Python script development and familiar with EDA tool design will be plus.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

NUS Centre for Additive Manufacturing (AM.NUS) is inviting applications for the position of research associate for polymeric biomaterials.

As a research associate in AM.NUS, you will be working on projects on the following areas:

• Synthesize new polymeric biomaterials for advanced bioinks.
• Undertake internal capability development projects and collaborative projects with researchers and industrial partners.
• Produce scientific research papers and grant proposals, and present in seminars, workshops, and conferences.
• Explore collaborations with researchers and industrial partners.
• Assist laboratory safety and procurement whenever necessary.

The NUS Centre for Additive Manufacturing (AM.NUS) leverages the National University of Singapore (NUS)’s world-class faculties, expertise and advanced capabilities in 3D printing technology, to bring innovative products to the field of healthcare that will improve patient outcomes and change lives for the better. AM.NUS will explore a whole new dimension in medicine, applying ground-breaking 3D printing technology for personalized patient treatments.
AM.NUS is the only multi-disciplinary Additive Manufacturing (AM) center in an Institute of Higher Learning in Singapore which comprises the following Faculties (Medicine, Science, Dentistry and Design & Engineering). The Centre is supported both internally by NUS and externally by National Additive Manufacturing Cluster (NAMIC).

Qualifications

• Master in Materials Science and Engineering/ Biomedical Engineering/Chemical Engineering/ Pharmacy or related field.
• Experience in polymer synthesis and characterization.
• Experience in cell culture techniques.
• Familiarity with 3D printing is an advantage.
• Proficiency in written and spoken English.

Key Responsibilities:

1. Administrative Support:

• Manage day-to-day office operations, including scheduling, organizing meetings, handling correspondence, and maintaining office supplies.
• Maintain accurate records and databases, ensuring that all information is up-to-date and accessible.
• Assist with general office tasks such as filing, photocopying, and document preparation.
• Provide support for internal communications and coordinate various administrative processes across teams.

2. Human Resource Support:

• Assist with HR tasks such as onboarding new employees, maintaining employee records, and coordinating training sessions.
• Help manage employee benefits, payroll administration, and general HR-related paperwork.
• Support recruitment efforts, including liaising with recruitment agency, screening resumes, and scheduling interviews.
• Help manage all employee correspondence with authorities such as WP application, renewal.
• Ensure HR policies and procedures are followed and provide assistance with employee queries.

3. Finance Support:

• Assist with basic accounting tasks, such as invoice processing, expense tracking, and maintaining financial records.
• Support the finance team in preparing reports, budgeting, and monitoring company expenditures.
• Help with payroll processing and related administrative tasks.

4. Graphic and Web Design:

• Design and produce marketing and promotional materials, including social media graphics, brochures, and email templates.
• Collaborate with the marketing team to create consistent and engaging visual content for digital platforms.
• Assist in the design and maintenance of the company website, ensuring it is up-to-date and visually appealing.
• Update website content, graphics, and layouts as needed, working closely with the management to ensure that website updates are executed smoothly and efficiently.

Qualifications:

• Proven experience (1-2 years) in administrative roles, with some exposure to HR, finance, and design or web-related tasks.
• Strong graphic design skills with proficiency in Adobe Creative Suite (Photoshop, Illustrator, InDesign, etc.), Canva, or similar tools.
• Basic knowledge of web design (HTML/CSS, WordPress, Wix or other CMS platforms).
• Familiarity with HR tasks (onboarding, payroll, employee records) and finance tasks (basic accounting, invoicing, expenses).
• Highly organized with excellent attention to detail and the ability to manage multiple tasks simultaneously.
• Ability to work independently, proactively solving problems and ensuring smooth operations.
• Strong written and verbal communication skills.
• Ability to collaborate with cross-functional teams and interact effectively with employees at all levels.
• A portfolio showcasing your graphic design and web design work is a plus.
• Qualifications in Visual Communication Design will be an Advantage.

Our Company
Powerzone H2 Technologies is a provider focusing on the design, manufacture, and distribution of PEM fuel cells.
We aspire to be the leader in Hydrogen fuel cell system integrator and solution provider in the APAC region.
We are hiring a talented engineering professional to join our team.
If you're excited to be part of a winning team, Powerzone H2 Technologies is a great place to grow your career.

Job Scope

· Work with the research center for scale-up production/ manufacturing· Troubleshoot and advise on electrical and mechanical Fuel cell systems together with superior. Do fuel cell product testing

· Monitoring stock level and dealing with suppliers for the production process

· Answer all technical enquires and maintenance requirements from customers as assigned by the Manager

· Complete projects on time and within budget. Carry out any other work directly by your immediate superior or Director

· Cooperate with the team to solve problems

Requirement

· Bachelor's Degree or equivalent in Engineering or Other Advanced Diploma / Post-Diploma qualifications in Electronic Certificate equivalent

· With at least 2 years of working experience in a relevant field ( Fresh graduates are welcome to apply)

· Good computer skills i.e MS Office Suite and MS Project, Autocad, Photoshop

· Fast learner

· Good problem-solving, organizational, analytical, and critical thinking skills

· Ability to manage your project effectively

· Must be able to work in a team environment, including the ability to manage vendors and project stakeholders

· Demonstrate proactiveness in handling tasks at hand.

· Previous experience working with lab/industrial equipment required (if applicable)

Degree in Civil Engineering / Geotechnical Engineering with 3 - 5 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 5 to 8 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 3 - 5 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 5 to 8 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 3 - 5 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 5 to 8 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

• Reports to APM
• To assist in site supervision structural and architectural works
• Coordinate with consultant RTO / RE.
• Coordinating for the project planning, documentation and execution of works on site
• Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required
• Coordinate for all submissions
• Produce weekly site progress reports
• Attend subcon meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements
• At least 5 years of working experience in Building & Construction in HDB (BTO) project
• Building and Architectural experiences
• Conquas Knowledge
• Good organizational and planning skills
• Effective communication and coordination skills and team work
• Able to work independently and in a team
• Independent with good communication skill

Key Responsibility

• Serving as the first point of contact to operational and user inquiries via phone and email.
• Following up with users to ensure full resolution of issues.
• Collaboration with stakeholders to resolve issues.
• Resolve technical issues by identifying problems, guiding users through corrective steps, or escalating issues to appropriate teams.
• Collaborate with internal teams to improve knowledge base and support processes.
• Create, review and update operational documentation and reports.
• Be proactive and promptly providing first level technical assistance to users' questions and problems.

Requirement

• Diploma or Bachelor's degree in Computer Engineer/Computer Science or related field.
• Excellent interpersonal skills with the ability to communicate (both verbally and written) and interact effectively at all levels.
• Familiarity with helpdesk software and technical troubleshooting.
• Strong communication skills and the ability to explain technical details clearly.
• Experience in supporting government agency is preferred.
• Experience with software testing is preferred.
• Singapore citizenship is required

Company Summary:
Since 2002, DVI Solutions has been a leading provider of audio-visual setups to help our clients communicate and collaborate better--whether it's with colleagues across the office, or partners on the other side of the world. We have presence across Singapore, Thailand, Shanghai, Hong Kong, Philippines, Vietnam, India, Malaysia and Indonesia. Our satisfied clients include corporations, government agencies, schools, retail stores, hotels and many more.

Position Summary:
As a Project Engineer at DVI, you will be at the forefront of delivering innovative Audio-visual and collaboration solutions for our corporate clients across a diverse range of industries such as corporate workplaces, healthcare, education and hospitality sectors.

Responsibilities:

· Handle end-to-end project execution, ensuring on-time delivery and adherence to quality standards.

· Manage client relationships, understanding their unique needs and ensuring their satisfaction.

· Oversee the integration of technology solutions, focusing on seamless operation and user-friendliness..

· Ensure compliance with safety and industry standards throughout project lifecycles.

· Handle budgeting, resource allocation, and scheduling.

· Collaborate with the Services Division for post-installation support, maintenance, and on-site services.

Requirements:

· 2+ years of project management experience within the audio-visual, technology (hardware/networking), construction/ building, corporate office set-up, Architecture & Planning or related industry.

· Experience working with clients on-site regularly.

· Excellent communication skills.

· Strong problem-solving and decision-making abilities.

DVI Solutions is an Equal Opportunity Employer. Qualified applicants are considered for employment without regard to age, race, color, religion, sex, national origin, sexual orientation, disability, or veteran status.

Working in the engineering team, the senior network engineer have extensive knowledge and experience in installation, termination of network equipment (Copper & Fiber Outlet, patch panel and cable management). He/ She will possess hands-on experience in testing & programming of network switch, router, WLAN controller, AP and firewall. He/ she have relevant system architect in data center infrastructure design and implementation including server (VMware), SAN storage and network.

Responsibilities

1. Take ownership of system design & implementation to make a truly access and complete of client requirements until full closure of the project delivery.

2. Conduct factory acceptance test in the workshop, providing FAT report.

3. Deliver customer training, presentation and support.

Key Deliverables

1. Functional Design

2. Infrastructure Block Diagram

3. System Termination Diagram

4. Network, Server & Storage Configuration profile

5. Infrastructure Security policy profile

6. FAT procedure & report

7. SAT procedure & report

Job Specifications

1. Minimum Bachelor in computer science, network or equivalent technical discipline.

2. Proven 5 years’ experience in a similar role & responsibility

3. Well organized documentation, objective driven, time-sensitive and resourceful.

4. CISCO certified (CCNP preferred)

5. NetApp / EMC certified (NetApp NCDA preferred)

6. VMWare certified (VCIX6-DCV preferred)

The Electrical Engineer will work with Project Team in carrying out the following:

• Conduct project electrical engineering works
• Prepare project electrical function specifications, electrical layouts, PLC IO list and wiring diagrams
• Conduct electrical products selectivity study and generate project electrical Bill of Materials (BOM)
• Generate Request For Quotation/ Offer and Purchase Request for electrical BOM.
• Prepare project electrical installation documentation with technical support for installation work
• Prepare electrical inspection test sheet/ template for test and measurement
• Evaluate and implement corrective measure on test result
• Prepare project specific electrical product operational and maintenance manuals
  

Qualifications:

• Degree in Electrical Engineering or Polytechnic Diploma in Electrical Engineering with relevant experience
• Professional Experience: Preferably with experience in airport, intralogistics projects electrical engineering design. Fresh graduate will also be considered in case-by-case basis.
• International Experience: Experience working in cross-cultural or international teams as added advantages.
• MS Office, EPLAN P8, AutoCAD and Navisworks CAD Tools
• LEW as added advantage.

Functional skills:

• Good knowledge and practical experience in electrical engineering design (e.g. Power Distribution, System and Equipment electrical control, cable containment system according to IEC and SS638:2018).
• Efficient in MS Office, EPLAN P8, AutoCAD and Navisworks CAD Tools skillset
• Understand IT networking infrastructure and hardware
• Must be willing to travel within Asia region with occasional traveling to Europe or Middle East
• Experience in simple PLC programming will be an advantage
• Experience in Material Handling System will be an advantage
• Experience in Brown field project engineering will be an advantage
  

• Process Optimization: Analyze and improve existing spray-painting process to enhance efficiency, reduce cycle times, and minimize defects. Implement innovative solutions to optimize workflow and increase productivity.
• Production Planning and Scheduling: Collaborate with production managers to develop production schedules, allocate resources, and ensure timely delivery of assembled components.
• Tooling and Equipment Management: Oversee the maintenance, calibration, and performance of spray equipment and tools. Coordinate repairs, modifications, and upgrades as needed.
• Troubleshooting: Identify and resolve spray-related issues, such as over spray/under spray, color tone issue and equipment malfunctions. Implement corrective actions to prevent reoccurrence.
• Continuous Improvement: Lead initiatives for continuous process improvement, including the application of lean manufacturing principles and other optimization methodologies.
• Cross-Functional Collaboration: Collaborate closely with design, engineering, and quality assurance teams to ensure seamless integration of components and timely resolution of design-related challenges.
• Documentation and Reporting: Maintain accurate documentation of spray processes, work instructions, and production reports. Generate regular reports on production performance and key metrics.
• Training and Skill Development: Train and mentor assembly/spray technicians on best practices, quality standards, and proper use of equipment to maintain consistent and efficient assembly processes.
• Health and Safety: Champion a culture of safety by ensuring compliance with all safety regulations and guidelines and promoting safe work practices

Requirements

• Diploma or Engineering Holder
• 3 years relevant experience in spray painting operation.
• Knowledge in spray paint processes, machine set-up and operation
• Knowledge on plastic manufacturing processes.
• Computer literate in Microsoft office.
• A pro-active team player

Job Scope/responsibilities:

• Lead/participate in planning process transformation projects
• Support Demand Supply Match, mitigate supply gap related to Backend network and provide solution.
• Highlight capacity risks and opportunities within tactical horizon
• Response to demand upside through structured analysis, cohesive network efforts and driving capability to enable upside.
• Work with Site teams to match WIP to backlog to meet customer commit metrics
• Understand and implement site loading/optimization within the pipeline horizon.
• Deploy tactical strategies across AT network that supports Micron’s Strategic Objectives.
• Primary interface to Supply Chain team for Tactical AT issues and operations.
• Team with Capacity team to drive strategic changes to the AT network
• Understanding end-to-end supply chain and the down-stream impact of demand and supply fluctuations
• Applying exceptional analytical skills and tool experience (Excel, Pivot Tables, Access, etc.) in support of this role
• Communicate effectively with Supply Chain, Site Planning and Order Promising teams.

Job Requirements/Qualifications:

• Bachelor’s in Engineering, Production Operations Management or Supply Chain related
• At least 2 years of experience in Planning, Supply Chain or Subcon Manufacturing experience
• Excellent Communication Skills
• SAP and Supply Planning Optimization (SPO) tool knowledge (advantage)

Job Description

Microsoft 365 Administration:
Assist in the management and configuration of Microsoft 365 services including user provisioning and licensing.

Security Policy Implementation:
Review, implement and maintain Microsoft 365 security policies and services.

Cybersecurity Management:
- Ensure compliance with Cybersecurity certifications for the organization.
- Manage data protection and cybersecurity functions, ensuring systems are properly set up and maintained to safeguard against threats.
- Conduct cyber risk assessment in support of technology initiatives to help identify IT related risk and determine appropriate controls to mitigate risks.
- Monitor, track, and manage risk mitigations and exceptions and ensure adequate monitoring capability is incorporated into solutions.

System Setup & Maintenance:
Oversee the setup, configuration, and ongoing maintenance of computer hardware, networks, and systems to ensure optimal performance.

Technical Support:
Provide IT technical support for end-users, addressing issues related to hardware, software, network, and cloud services.

Vendor Liaison:
Be the point of contact between users and IT vendors to facilitate the delivery of IT solutions and services.

IT Asset Documentation:
Assist in the procurement and thorough documentation of IT assets following SOPs for onboarding, issuance, deployment, repair and disposal.

Additional Duties:
Undertake other tasks as assigned by Management to support organizational goals.

Minimum Qualifications

Educational Background:
Diploma or Degree in Computer Science or related discipline.

Technical Expertise:
Strong hands-on experience with the Microsoft Windows environment, including configuring and troubleshooting.

Microsoft 365 Knowledge:
Proficiency in configuring and managing Microsoft 365 services and implementing security measures.

Problem-Solving Skills:
Ability to diagnose and resolve a range of IT issues with effective troubleshooting.

Communication Skills:
Competence in liaising with both users and vendors of all levels, ensuring clear and timely communication.

Security-Focused:
Knowledge of cybersecurity best practices and experience in implementing security policies and procedures.

Desired qualifications:

• Professional Certifications in Microsoft 365 services and / or Cybersecurity
• At least 1 year experience communicating and servicing end users of all levels
• Experience using mobile device management software to manage both Windows and MacOS devices as well as mobile phones and tablets
• Familiarity with setting up and configuring servers and other network devices advantageous

JOB DESCRIPTION

Increasing sales revenue through B2B sales opportunities.

JOB SCOPE

Sales Engineer shall be responsible for

• Develop and implementation of strategic sales and action plans to expand overall business growth;
• Perform product sales introduction and technical presentations to customers;
• In charge of creating sales pipeline from lead generation, sales engagement, negotiation to closing;
• To build and maintain strong relationships with key decision-makers and stakeholders;
• Maintaining a collaborative and constructive exchange as an integral part of product & marketing team;
• Maintaining and improving leads records in CRM timely and accurately manner;
• Provide accurate sales forecasting and maintain regular updates on sales opportunities;
• Monitor and analyses of market, company and competitor performance/activities and proactively recommend changes to the company initiatives; and
• Any other adhoc job assigned.

Jason Energy Pte Ltd, a wholly owned subsidiary of Jason Marine Group Limited has significant experience in providing completed integrated telecoms for the offshore/onshore oil and gas industries. As a recognised Telecommunication System Integrator in the oil and gas global market, we provide turnkey project systems that covers a full spectrum of services from the areas of engineering design, project management, supply, integration, installation, testing, commission, and maintenance.

We are looking for a Project Engineer to prepare, schedule, coordinate and monitor the projects that are being assigned to him/ her. Reporting to the Project Manager in the Project Team, he/ she will

• Work together with the clients, either at our office or client’s locations, to understand their needs and translate them into an actionable plan with the team.
• Work closely and communicate effectively with project manager, and other project team members to create and deliver quality solutions for the clients.
• Perform quality control work, taking into considerations of the budget, schedule, and plans.
• Keep track of project status and provide regular reports.
• Assure all the deadlines are being met.

Requirements:

• Diploma or Degree in Engineering or relevant field
• Proven working experiences as a project engineer
• Project management and organizational skills
• Commitment to exceeding customer’s expectations
• Time management and organization skills

Good to Have

• MS Office Skills
• Microsoft Project Skill
• Dynamic Business Central knowledge will be an advantage
• Negotiation skills

Working in the engineering team, the senior network engineer have extensive knowledge and experience in installation, termination of network equipment (Copper & Fiber Outlet, patch panel and cable management). He/ She will possess hands-on experience in testing & programming of network switch, router, WLAN controller, AP and firewall. He/ she have relevant system architect in data center infrastructure design and implementation including server (VMware), SAN storage and network.

Responsibilities

1. Take ownership of system design & implementation to make a truly access and complete of client requirements until full closure of the project delivery.

2. Conduct factory acceptance test in the workshop, providing FAT report.

3. Deliver customer training, presentation and support.

Key Deliverables

1. Functional Design

2. Infrastructure Block Diagram

3. System Termination Diagram

4. Network, Server & Storage Configuration profile

5. Infrastructure Security policy profile

6. FAT procedure & report

7. SAT procedure & report

Job Specifications

1. Minimum Bachelor in computer science, network or equivalent technical discipline.

2. Proven 5 years’ experience in a similar role & responsibility

3. Well organized documentation, objective driven, time-sensitive and resourceful.

4. CISCO certified (CCNP preferred)

5. NetApp / EMC certified (NetApp NCDA preferred)

6. VMWare certified (VCIX6-DCV preferred)

• Bachelor's Degree/ Diploma in Geology or a related field.
• Minimum 5 years of relavent experiance in Geotechnical Engineering Works.
• Proven experience in Tunnelling projects is mandatory.
• Prior experience with Rail & Land Transport Authority (LTA) projects is required.
• Strong analytical skills, problem-solving abilities and excellent attention to detail.
• Familiarity with geotechnical instrumentation and ground improvement techniques is an advantage.
• Plan, supervise and ensure quality control for ground improvement work to meet project specifications and standards.
• Provide geological supervision during tunnelling operations to ensure safety and efficiency.
• Develop and implement plans for additional soil investigations related to tunnelling works, ensuring accurate assessment of ground conditions.
• Conduct detailed face mapping to analyse and document ground conditions during tunnelling activities.
• Plan and supervise instrument monitoring works to assess ground behaviour and ensure stability during construction.
• Applicants are required to submit their detailed CV and state the current and expected salary.