Job Description:

We are looking for an Analog Chip Design Engineer to lead the development of digital standard cell libraries and design advanced analog circuits. You will optimize circuit designs, innovate new digital standard cells, and collaborate with cross-functional teams to meet performance, power, and area requirements.

Key Responsibilities:

• Circuit Design & Optimization: Lead analog circuit design, optimize for speed, power, and reliability using Cadence Virtuoso, Spectre, and HSPICE.
• Digital Standard Cell Libraries: Develop high-performance, low-power digital standard cells.
• Innovative Architecture Development: Research and design innovative digital standard cell architectures and explore new logic families and power-saving techniques.
• Collaboration: Work with layout designers to ensure manufacturability, performance, and adherence to DFM/DFT standards.

Qualifications:

• Education: Bachelor’s degree or higher in Electronics Engineering, Computer Science, or related field. Master’s or Ph.D. is a plus.
• Experience: 5+ years in high-performance analog design with expertise in deep sub-micron process technologies (12nm and below).
• Skills:
  • Analog Design Expertise: Proficient in transistor-level design, noise analysis, and power optimization.
  • Tool Proficiency: Experience with Cadence Virtuoso, Spectre, and HSPICE.
  • Digital Standard Cell Design: Experience designing digital cells balancing performance, power, and area.
• Communication: Strong collaboration skills and ability to work in cross-functional teams.

Job role:

1. Works with the front-end design team to complete the chip floorplan , clock

architecture, and powerplan .

2. Takes charge of the physical design tasks from the Netlist to the GDS2, including P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability (DFR) and tapeout.

3. Researches the physical design methodology of advanced process nodes, and builds an

automatic physical design platform.

Position Requirements:

1. Holds a bachelor's degree or above in electronic engineering, microelectronics, or computer science.

2. At least 3 years of work experience in the digital backend design field.

3. Hands-on project experience is required.

4. Tapeout experience at advanced technology is prefered.

5. TCL , Perl or Python script development and familiar with EDA tool design will be plus.

Job Description:
We are looking for a highly skilled Physical Chip Design Engineer to lead the development of low-power and high-performance chip design processes. This is a critical role that requires deep expertise in advanced semiconductor technologies and the ability to drive full-chip physical design workflows from start to finish.

Key Responsibilities:

• Low-Power Physical Design Workflows: Lead and optimize processes to enhance energy efficiency while maintaining chip performance.
• Full-Chip Floor Planning & Place-and-Route: Oversee floor planning to ensure optimal performance, power, and area. Manage place-and-route processes for efficient, functional designs.
• Power Network Design & Analysis: Design and optimize power distribution networks, perform grid analysis to ensure power integrity and low-power design.
• Timing Closure, Power Integrity, & Signal Integrity: Resolve timing challenges, ensure power and signal integrity signoff, and perform necessary optimizations.
• Physical Verification (DRC & LVS): Conduct thorough physical verification, including Design Rule Checks (DRC) and Layout Versus Schematic (LVS) to ensure compliance with design specifications.

Qualifications:

• Education: Bachelor’s degree or higher in Electronics, Electrical Engineering, Computer Science, or related field. Advanced degrees (Master’s/Ph.D.) are a plus.
• Experience: 4-5 years of hands-on experience in physical design, with expertise in low-power, high-performance chip design. Experience with 12nm and below semiconductor technologies and tape-out processes is essential.
• Technical Skills:
  • Expertise in full-chip floor planning, place-and-route methodologies, and physical verification (including DRC and LVS).
  • In-depth knowledge of power network design, IR drop analysis, and timing closure.
  • Proficiency in Synopsys IC Compiler, Cadence Innovus, or similar tools.
  • Proficiency with Static Timing Analysis (STA) tools.
• Programming Skills: Strong scripting skills in Perl, TCL, Python, and C++.

Job Summary:

We are looking for an Architecture Design Engineer to focus on the development and optimization of AI Chip hardware systems. This highly technical role involves designing simulators, optimizing AI chips at various levels, and developing front-end code to ensure AI chip functionality and performance.

Key Responsibilities:

• Simulator Design:
  Utilize tools like GEM5 to design and develop simulators for AI chips, ensuring accuracy and efficiency in simulating chip behavior across various workloads.
• Performance Optimization:
  Optimize AI chips at:
  • Algorithm Level: Enhance computational algorithms for efficiency.
  • Architecture Level: Design and refine the overall chip structure.
  • Circuit Level: Improve low-level electrical performance.
• Front-End Code Development:
  Write, test, and optimize front-end code for AI chip functionality, ensuring compatibility with the chip’s architecture.

Qualifications:

• Educational Background:
  Minimum Bachelor's degree in Computer Science, Electronics, or a related field. Advanced degrees are a plus.
• Technical Knowledge:
  • Strong understanding of computer architecture and AI hardware accelerators (e.g., GPUs).
  • Familiarity with memory access patterns in AI models and effective memory handling.

What you will do:

• Provides sales support to the engineering /sales team. Conducts engineering design and processes and / or financial analysis during project development. Generates take-off plans and specifications. Develops and writes estimates or proposals. May call on potential customers as directed by sales managers.

How you will do it:

• Perform drafting, design and prepare engineering drawings (2D) and documentation as per customer’s/project requirements.
• Create electrical schematic, Design layout plans and detailed designs with AutoCAD software.
• Provide pre-sales support to Sales team, including proposal costing and attending technical clarifications
• meeting and/or presentation with customers
• Products sourcing from suppliers.
• Compilation and submission of all documentations as required as per the project requirements.
• Review customer’s technical comments and revise documentation and drawings.
• Visual Inspection and quality check on products/Systems.
• Prepare Functional Test Documents and Assist Project Operations Team on functional testing.
• Liaise and maintain good relationship with customers, subcontractors and suppliers

What we look for:

• Min. Diploma/Degree in Electrical/ Electronic Engineering
• More than 5 years’ experience in Marine Offshore Protection System with related experience.
• Good knowledge of NFPA/Marine Classification Rules & Regulations
• Familiar with Fire & Gas Detection, Vesda Systems.
• Proficiency in AutoCAD and Microsoft Office especially Microsoft Word and Excel.
• Resourceful, results-oriented, excellent interpersonal skills and business acumen
• Able to work independently and deliver results for multiple projects under tight deadlines
• Willingness to learn new things.
• Basic knowledge OT systems, such as SCADA and DCS
• Basic understanding of cybersecurity concepts and best practices, including risk management, threat modeling, and incident response
• Excellent analytical and problem-solving skills
• Strong communication and collaboration skills

What we offer:

• Competitive salary
• Paid vacation/holidays/sick time
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

• We are a chip design service company invested by an international consortium and founded by a senior chip design technical team.
• The company is headquartered in Singapore and will take root in Singapore for long-term development.
• The company has strong R&D capabilities and its core technical team members all have more than 10 years of experience in chip design.
• We have rich industry experience and deep practical accumulation in ASIC design and business management.

Our office is located in one North and walking distance from MRT.

We Provide competitive salary and compensation package for the right candidate. We are work-life balance and friendly to employees with various benefit.

Job Description：

1. Works with the front-end design team to complete the chip floorplan , clock architecture, and powerplan .

2. Takes charge of the physical design tasks from the Netlist to the GDSII, including P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability and tapeout.

3. Researches the physical design methodology of advanced process nodes, and builds an automatic physical design platform.

Position Requirements:

1. Holds a bachelor's degree or above in electronic engineering, microelectronics, or computer science.

2. At least 5 years of work experience in the digital backend design field. Hands-on project experience is required. Tapeout experience at advanced technology is prefered. ( for excellect junior candidates with 3+ years experience will be considerated )

3. Those with experience in TCL , Perl or Python script development and familiar with EDA tool design will be plus.

4. Strong communication ability, good confidence and self-movitation.

5. Bilingual and with good teamwork spirit.

6. Salary is negotiable for excellent candidates.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

In 2021 the Singapore Hybrid-Integrated Next-Generation micro-Electronics (SHINE) Center was established.

One of the projects in SHINE focuses on developing the technology and demonstrating Radio Frequency (RF) and microwave applications on flexible substrates.

As part of this project, we have a position for a research engineer with proven knowledge and experience in researching, designing, and testing of microwave circuits and subsystems.

Qualifications

• Possess a Bachelor or Master degree in Electrical Engineering
• Experience in the simulation and design of microwave circuits and subsystems.
• Experience with tools such as ADS and HFSS.
• Experience with measurement of microwave circuits using VNAs.
• Able to work independently and in a team.
• Open to fixed-term contract.

Seeking a meaningful design internship?

Expand Your Creative Limits with APT811: Where Design Meets Innovation

We’re seeking a design intern to join our small, lean team. Our goal is to give motivated designers the chance not just to be creative but to be strategic and thinking designers.

Needed: Basics in graphic communication design, visual hierarchy, Adobe CC (Photoshop, Illustrator, InDesign), and Figma.

This role is for those ready to integrate AI into design and work closely with our founders. It is ideal for individuals with a growth mindset looking to improve their design strategy and execution.

Our four pillars guide your growth: technical skills, strategic thinking, personal growth, and social influence. Progress through a structured path to develop your abilities.

What’s in it for you at APT811:

• Use professional AI design tools
• Create impactful designs with clarity
• Learn effective brand communication
• Strengthen your growth mindset
• Access a wealth of training resources

Work Responsibilities

As an intern at APT811, you will play a vital role in our team, contributing to various projects and honing your skills. Your responsibilities will include:

Brand Communication and Research:

• Work on brand communication touchpoints.
• Conduct research using AI tools like Custom GPT, Midjourney, and SEMrush (SEO).
• Analyse market trends and competitor strategies.

Design and Development:

• Create brand and campaign collaterals.
• Design brochures, posters, digital ads and various touchpoints.
• Ensure all designs align with brand guidelines.

Workshop Facilitation:

• Assist in planning and organising design thinking workshops.
• Support facilitators during sessions.
• Engage with participants and gather feedback.

Proposal and Presentation Support

• Help draft and design brand proposals.
• Contribute creative ideas and concepts.
• Develop visual narratives for presentations.

Continuous Learning and Application:

• Learn and apply new design software and tools.
• Participate in brainstorming sessions.
• Engage in training sessions and workshops to improve your skills.

If you have a growth mindset, like strengthening your resilience and thinking strategically, we'd like to work with you!

Apply today and do good with design together.

www.apt811.com | www.thinkroom.sg

Position Overview:

We are seeking a skilled Physical Design Engineer to join our team. As a Physical Design Engineer, you will be responsible for the entire process from RTL to GDS, ensuring the successful implementation of complex semiconductor chips. You will focus on block-level timing closure, formal checks, low power checks, power analysis, and signoff for block-level physical implementation. Your expertise in advanced process nodes, low-power design, and automotive chip physical design will contribute to the development of cutting-edge semiconductor products.

Responsibilities:

• Assist in the physical design process, overseeing RTL to GDS implementation for semiconductor chips.
• Achieve block-level timing closure by optimizing design constraints, performing timing analysis, and applying optimization techniques.
• Conduct formal checks to ensure designs meet functional and timing requirements.
• Perform low-power checks and analyze power consumption to optimize power efficiency.
• Collaborate with the design team to develop and implement UPF (Unified Power Format) for power management and control.
• Execute block-level Place and Route (APR), Static Timing Analysis (STA), Power Integrity (PI), Physical Verification (PV), and Formal Verification (FM) signoff processes.
• Utilize Synopsys and Cadence APR (Automated Routing and Place) tools for high-quality physical design.
• Develop and employ scripts in Tcl, Perl, or Python to automate design tasks and improve the design flow.

Qualification/ Requirements:

• Bachelor's/master’s degree in electrical engineering, Computer Engineering, or a related field.
• 2-4 years of experience in physical design for semiconductor chips.
• Proficiency in RTL-to-GDS flow, timing closure, low-power design, and power analysis.
• Strong understanding of UPF for power management and control.
• Experience with block-level Place and Route (APR), Static Timing Analysis (STA), Power Integrity (PI), Physical Verification (PV), and Formal Verification (FM) signoff.
• Familiarity with Synopsys and Cadence APR/Sign-off tools.
• Proficiency in scripting languages such as Tcl, Perl, or Python for automation.
• Excellent problem-solving skills and ability to work effectively in a team environment.

Please apply here: https://talent.sage.hr/jobs/12fc69c2-7012-4edc-b214-bb9c2ded1da2

Applicants will need to include a Cover Letter and CV with publication list.

Applications will be reviewed on a rolling basis, with final submission 20 January 2025.

We are particularly looking for IC Design Research Engineers with the following backgrounds:

- Digital IC Design

- Analog IC Design

As an IC Design Research Engineer, you will design and innovate secure circuits and systems for next-generation low-power IoMT devices and sensors, focusing on hardware security, and smart computing and connectivity platforms.

Imperial College London and Nanyang Technological University (NTU) are seeking Research Engineers and Research Fellows to join the exciting new Imperial/NTU CYber Protection for HEalthcaRe (IN-CYPHER) research programme on the cybersecurity of connected medical devices and systems.

The successful candidates will join the research programme which represents a collaboration between the United Kingdom and Singapore and will be based at the newly established Imperial Global Singapore (IGS) housed within the unique CREATE campus.

Positions will be initially for 2 years fixed term (subject to 6-month probation) with potential for extension.

Informal enquiries are greatly welcome. You are encouraged to send an e-mail to Dr Viktor Schlegel, Deputy Programme Director [email protected], together with an indication of the specific position you would like to apply for.

Questions about the recruitment process, should go to Paige Noyce, Associate Director [email protected].

Positions are based in Singapore at Imperial Global Singapore at the National Research Foundations Campus for Research Excellence and Technological Enterprise (CREATE) located on the campus of the National University of Singapore.

Job Title: Business Development Executive

Location: Tai Seng Area

Company: Hera Bathroom

About Us: Hera Bathroom is a leading provider of high-quality bathroom fixtures and solutions. We pride ourselves on delivering exceptional customer service and innovative design solutions to our clients.

Job Description: We are seeking a proactive and results-driven Business Development Executive to join our team. The ideal candidate will have excellent presentation skills and a strong ability to build and maintain relationships with interior designers. As a Business Development Executive, you will be responsible for sourcing new business opportunities and liaising with interior designers to promote and use Hera Bathroom products.

Key Responsibilities:

• Identify and source new business opportunities within the interior design industry.
• Build and maintain strong relationships with interior designers and other key stakeholders.
• Present Hera Bathroom products and solutions to potential clients in a compelling and professional manner.
• Collaborate with the sales and marketing teams to develop strategies for increasing market share.
• Achieve and exceed sales targets and KPIs.
• Provide excellent customer service and follow up with clients to ensure satisfaction.

Requirements:

• Proven experience in business development or sales, preferably in the interior design or home improvement industry.
• Strong presentation and communication skills.
• Ability to work in a team-oriented environment.
• Goal-oriented with a track record of meeting or exceeding sales targets.
• Creative and detail-oriented with a passion for design.
• Ability to work flexible hours, including weekends and holidays.

What We Offer:

• Competitive basic salary and commission structure.
• Opportunities for professional growth and development.
• A friendly and supportive team environment.
• Employee discounts on Hera Bathroom products.

How to Apply: Interested candidates are invited to submit their resume and a cover letter detailing their relevant experience and why they are a good fit for this role to [email protected]

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Department of Architecture invites applications for one Practice Track position in Architectural Design.

The Department of Architecture in the College of Design and Engineering is ranked among the top 10 in the world, and Asia’s best in Architecture/Built Environment, by the Quacquarelli Symonds (QS) World University Rankings (2023). It offers the professionally accredited Master of Architecture programme as well as a range of graduate and undergraduate programmes in related fields such as urban planning/design, landscape architecture and conservation. The faculty is correspondingly diverse and international. The Department offers internationally competitive remuneration, generous employment benefits as well as access to research funding for both junior and senior academics. International applicants will also receive subsidized housing at Kent Vale.

Qualifications

Research by Design (RxD) at the Department of Architecture seeks qualified, interdisciplinary, and inspirational candidates with expertise in creative practice research (research through design, as opposed to research for design or research about design). We seek candidates with expertise in design with foundations in decarbonized & planet-positive futures, warming world futures, social justice, and inclusive futures, with a particular focus on being situated in the tropical geographies of Southeast Asia and the equator. Candidate research should be manifested through a robust portfolio of creative practice outputs and substantiated through forms of peer review and public and societal engagement, with evidence of leading with anticipatory and future-forward design ideas that impact evolving society and the profession. We are especially interested in candidates who are leaders in Research by Design methods in the academy and who leverage creative practice to imagine and manifest a more just world.

Successful candidates are expected to teach and lead design studio courses related to research by design, with core, elective, and seminar courses to complement the design studio.

All qualified individuals are encouraged to apply. To apply, please provide the required documents in pdf and indicate which position you are applying for.

1. A letter of interest
2. A complete Curriculum Vitae
3. A Statement of Teaching (maximum two pages)
4. A Statement of Research (including a short research plan for next three to five years maximum three pages) – citing up to five significant publications, creative work or other scholarly contribution and explaining their significance, and a writing sample.
5. Names of four referees with contact details (who will be contacted only if shortlisted). Please highlight any who is a member of your PhD dissertation committee.
6. Portfolio of work showing research through design

In accordance with the Personal Data Protection Act (PDPA), please provide consent for the collection, use and disclosure of personal data, using the NUS Personal Data Consent for Job Applicants form.

Only shortlisted candidates will be notified.

Position Overview:

Black Sesame Technologies is seeking a talented and innovative Machine Learning Research Scientist with expertise in software/hardware co-design to drive advancements in autonomous driving technologies. This role offers a unique opportunity to bridge the gap between machine learning algorithms and hardware design, contributing to high-performance, efficient, and scalable solutions for AI-driven systems.

Responsibilities:

• Conduct in-depth research and analysis of cutting-edge machine learning algorithms, with a primary focus on applications in autonomous driving.
• Monitor and forecast industry trends in AI technologies to identify opportunities for innovation and improvement.
• Evaluate the computational and memory requirements of various AI models and operators, identifying optimization opportunities.
• Collaborate closely with chip architects and engineers to design and implement software/hardware co-designed solutions that enhance chip performance, efficiency, and scalability.
• Develop comprehensive technical documentation and presentations to effectively communicate complex concepts to both technical and non-technical audiences.
• Stay connected with academic and industry research communities to remain at the forefront of AI and machine learning advancements.

Qualification/ Requirements:

• Education: Master’s or PhD in Computer Science, Electrical Engineering, or a related technical field with a strong focus on machine learning.
• Experience: Proven experience in developing and analyzing machine learning algorithms.
• Programming Skills: Proficiency in programming languages such as Python and C++.
• ML Frameworks:Hands-on experience with machine learning frameworks like TensorFlow and PyTorch, and deploying them on hardware accelerators.
• Collaboration: Demonstrated ability to work effectively in a team-oriented, cross-disciplinary environment.
• Co-Design Expertise: Strong understanding of software/hardware co-design principles and their impact on system performance is highly preferred.

Roles & Responsibilities

• Ensure performance complies with specications, technical clarications, and drawings.
• To guide and supervise on works arrangement and site activity.
• To check all installation drawings and prepare relevant schedule.
• Monitor the daily progress of activities and prepare daily report of the status of each assignment.
• Managing project budgets. Able to work on weekend/public holiday.
• Able to work regularly under rooftop.
• Able to use Microsoft suite of Software including project.
• Prociency in AutoCAD is preferred.
• Good organizational skills and communication skills. Good technical competency.
• Carry out the electrical cabling works, tray & trunking works with installation.
• Experience in integration of the sites.
• Minimum Certicate requirement in Safety Supervisor.
• Candidates with a Diploma in Electrical and Electronics Engineering or above Minimum 3 years working experience on related sites

Roles & Responsibilities

• Ensure performance complies with specications, technical clarications, and drawings.
• To guide and supervise on works arrangement and site activity.
• To check all installation drawings and prepare relevant schedule.
• Monitor the daily progress of activities and prepare daily report of the status of each assignment.
• Managing project budgets. Able to work on weekend/public holiday.
• Able to work regularly under rooftop.
• Able to use Microsoft suite of Software including project.
• Prociency in AutoCAD is preferred.
• Good organizational skills and communication skills. Good technical competency.
• Carry out the electrical cabling works, tray & trunking works with installation.
• Experience in integration of the sites.
• Minimum Certicate requirement in Safety Supervisor.
• Candidates with a Diploma in Electrical and Electronics Engineering or above Minimum 3 years working experience on related sites

Summary:

• Basic up to $4500
• Yearly variable bonus
• 5 days work week
• Location: Pioneer
• MNC company - stable revenue
• Strong in Solidworks
• Familiar with CATIA

Key Responsibilities:

• Produce CNC design solutions for customize specification
• Produce design for automation
• Make drawings (2D & 3D) in CATIA
• Make parts explosion / BOM list using ENOVIA
• Documentation for fabrication
• Evaluation for design solutions
• Support production for machine modification design
• Do engineering presentations
• Other related adhoc duties

Key Requirements:

• Min Diploma in Mechanical Engineering
• Min 2 years relevant working experience
• Strong in Solidworks & CATIA

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

On behalf of our hiring client who is an Original Equipment Maker (OEM), we are looking for a suitable candidate to join them as Product Design Engineer (Electrical).

Responsibilities:

• Provide technical support to the Project team, Installation on problem verification, report and coordinate with Group on job site issues and technical solutions related to electrical design.
• Involving in design interfacing and parts provision among Group of companies.
• Participate in the resolution of design problems related to Error/Trouble investigation, and formulate corrective & preventive measures.
• Provide engineering support to Sales Team for new products.
• Provide Maintenance Works Inquiry/Spare Parts Inquiry/Order Supports.
• Any other ad-hoc matters assigned by the Manager.

Requirement

• Degree/Diploma in Electrical Engineering with at least 2-3 years experience in electrical design work.
• Proficient in Auto CAD & 3D software is essential
• Fresh degree holders are welcome to apply

EA license : 22C0971 | EA Registration : R21101298

Location: East

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Electrical and Computer Engineering (ECE) Department of National University of Singapore (NUS) is looking for applicants for research engineer positions to support 3D-IC package fault localisation and failure analysis (FA) techniques with ANSYS High Frequency Structure Simulator (HFSS). The applicant will work closely with our researchers to understand and derive insights from scientific experiments and data. The applicant will also assist in the design and development of a physical test vehicle for the measurement of simulated results.

Responsibilities will include:

1. Contribute to defect classification and localization through simulation defect modelling.
2. Involve in 3D-IC forward predictive modelling (i.e. include chip and circuit blocks) by generating training materials.
3. Design of mock IC test vehicles for high frequency electromagnetic and DC magnetic field measurement and testing.

Qualifications

• A bachelor’s or higher Degree in Electrical, Electronics, Mechanical, Chemical Engineering, Physics, Material Science or its equivalent from a reputable University/Institute is preferred, or equivalent related experience.
• Candidate with experience in microelectronic research, characterisation, metrology, electrical testing, FA and strong in data analysis will have advantage. Knowledge of AI/ML/DL development and ANSYS/TCAD modelling.
• Strong analytical and problem-solving skills.
• Motivated and possesses effective communication skills including writing and presenting.
• Ability to work independently and collaborate within a diverse team.
• Open to Fixed Term Contract.

Responsibilities:

• Understand project requirements and design concepts to translate conceptualise design ideas into drawings
• Prepare layout plan, 2D construction Drawing, shop drawings, section details, space planning in fast-paced work environment
• Work closely with interior designer and sales designer to deliver high quality work
• Revise drawings and layouts to accommodate changes and enhancements
• Perform other duties as assigned by the superior

Requirements:

• Junior position at least 1 year and senior position at least 3 years experience
• Passionate in interior design, and able to manage new and existing projects to achieve project objective
• Required Skill(s): Autocad, Photoshop
• Can do attitude and able to multitask & work independently with minimum supervision
• Candidates who can start work immediately or on short notice will have an added advantage (Singaporean & Permanent Resident preferred)

Responsibilities

• Undertake detailed design in Building Structures
• Execution of projects and liaison with the Client, Client’s Consultants, Contractors, and authorities to provide technical support for design
• Checker to obtain approval of design and drawings
• Prepare design report & attend meeting to resolve technical issue

Requirements

• Degree in Civil and Structural Engineering or its equivalent that is recognized by the Professional Engineers Board of Singapore
• Well versed with local authority codes and regulations
• Minimum 4 years of relevant building structure with civil experience
• Involve in large scale building (HDB/ Condominium/ Commercial) structural design project
• Good exposure in the analysis and design of PPVC, Precast and concrete structures, steel structures
• Good knowledge of the various engineering design software and analytical tools
• Applicant who has lesser experience will consider for Engineer role

- Propose alternative design to substitute tender design that is practical, liable, cost-saving and conforms to relevant building code of practice.

- Liaise with client, architect, consultant, and main contractor for any site issues to ensure timely project execution. To represent the Company at site meetings and other meetings as required.

- Responsible for site coordination workers and to make accurate, decisive, and prompt decisions relating to work matters. Feedback to management on site problems for corrective actions to be taken.

- To ensure details in subcontracts, purchase orders are accurate and meet with the project specifications in covering the full scope of work intended and required by the main contract.

- Efficient project management which includes project scheduling, lead, and co-ordinate the whole project team which include supervisors, foreman, workers and subcontractors.

- Source for more competitive costs in equipment and subcontractor costs to minimize project cost and capital utilization.

- Responsible for preparation, checking and submission of shop drawings before commencement of installation works and as-built drawings upon completion. The drawings shall provide for the openings through building structures for the passage of M & E services and shall ensure conformance to regulation and clients’ requirements.

- Submission of monthly progress claim to clients and monitoring of variation works, avoid wide differential in claim and payment amounts. To finalize project accounts and variation claims early for client’s verification and payment.

- To monitor the progress of work on site and recommend, if appropriate, the interim payment certification to supplier/subcontractors proposed by the designated Project Engineer.

- To access, recommend and recruit suitable subcontractors and work force to provide quality engineering services to our clients.

- To be readily involved in tender estimation, variation quotation and costing preparation and assist the project manager in the preparation of budgetary statement.

- Responsible for all correspondences with the clients, authorities, main-contractors, subcontractors, vendors, architects, consultants, etc.

- To be actively involved with quality management system of the company.

- Perform any other duties as assigned by higher management or superior.

Job Requirements:

- Degree or Diploma holder in Mechanical Engineering or equivalent.

- Have more than 3 years or dible experiences in ACMV system.

- Proficient in Microsoft Office, AutoCAD and BIM.

- Independent, diligent, highly motivated with excellent team spirit and cope in a fast-paced environment.

- Strong analytical and problem-solving skills, with the ability to identify and resolve complex issues.

We regret that only the shortlisted candidates will be notified

Halo Microelectronics, a developer of Analog and Mixed Signal Integrated Circuits enabling energy-efficient smart systems is looking for experiences Analog Circuit Design Engineers to join the Singapore Design Team.

Responsibilities:

* Transistor level design of Analog circuits, simulation, evaluation and characterization, system verification.

* Circuits design includes reference, amplifiers, drivers, LDOs, switching regulators or other mixed signal circuits.

* Coordinate with Layout Engineer in layout/mask design.

* Coordinate with application and product engineer, testing engineer to bring the products to production successfully.

* Work with application engineer and FAE to solve customers technical issues.

Qualifications:

* Strong educational or industrial background in Analog Circuit Design.

* Experience with bipolar and CMOS IC design.

* Personal character and team building skills essential to enabling on-time delivery of devices.

* Ability to work independently

* Must demostrate good communication and interpersonal skills.

* Must be able to perform as a team member.

Responsibilities

• Support and provide mechanical engineering design
• Handle design works and/or project management relevant to ACMV, Fire Protection, Sanitary and Plumbing.
• Supervise and coach a team of engineers in mechanical services for the project from concept stage, design development, contract documentation, authority submissions, site administration to project completion
• Act as either Project Manager or Team Leader in projects.
• Act as mentor to new employees.
• Provide technical assistance to engineers.
• Advise engineers on the project administration and contractual issues.
• Conduct technical discussion on common design problems with engineers

Requirements

• Recognised Degree in Mechanical Engineering with PEB Singapore
• Candidate must have min 6 years of relevant working experience in design engineering of ACMV / HVAC, Fire Protection and Plumbing services with Engineering Consultancies in Singapore
• Proven track record of working across organization boundaries to define requirements, solve complex problems and drive programs to successful completion
• Good understanding of Singapore Code of Practice and local authority submission process (LTA / PUB / BCA)
• BIM and CAD capabilities (REVIT / Microstation / Autocad) will be added advantage

We are seeking a skilled Civil Engineer to support the site project. The candidate will also supervise concreting operations and manage estimation of Bill of Quantities, project progress claims and earthwork supervision. Proficiency in AutoCad to review and make necessary adjustment to project

drawings.

Responsibilities

• Attend to all customer calls.
• Performing thorough equipment inspections, calibration, adjustment & test/repair of equipment
• Scheduling appointments for test equipment due for calibration
• Ensuring laboratory equipment is calibrated as per specifications and standards
• Addressing and troubleshooting any test equipment failures and repairing of test equipment
• Maintaining and updating a record of all documentations of the calibration process
• Administering and monitoring effectiveness of calibration procedures
• Ensuring completion of tasks as per assigned deadlines.

Requirements

• Minimum Education Level: NITEC/ Diploma in Electrical/Electronic Engineering or its equivalent
• Minimum 3 years proven work experience as a calibration technician or similar role
• Knowledge in ISO 7025 standard will be an advantage
• Strong analytical and troubleshooting skills
• Hardworking, meticulous, team player and able to work independently
• Proficency in Microsoft Office is essential