Responsibilities

• · Leading Process Design Team for Oil & Gas Projects and guide a team of about 10 Process Design Engineers / Designers to finish the Process design (start from Basic design to Detail Design) of the project.
• · Leading a Team of Process Engineers & Designers in Preparation & Review of PFD, P&IDs, MSD, PSD, Hydraulic calculations, Equipment sizing calculations, BOG calculations, Heat Loss calculations, Tank Venting calculations, Tank capacity calculations, Heating coil calculations, PSV calculations, Process data sheets for Equipment’s such as pumps, compressors, Refrigeration unit, Tanks, Process data sheets for Instruments such as control valves, PSV, PT, TT, LT, Flow meter, Process line list, Heat & Material Balance, HAZOP & SIL Study, Operation Manual, Process control Narrative, Cause & Effect Diagram, Surge Analysis.
• · Review & Checking of Process Documents such as PFD, MSD, P&IDs, Hydraulic Calculations, Process Data Sheets, Surge Analysis, Design Calculations etc to ensure that all the Process documents comply to applicable Codes & Standards and Project Requirements
• · Review & Checking of Surge Analysis report using Pipenet Transient Module for product loading/unloading operation, fire water network systems etc.
• · Review & checking of various process philosophies like Process Control Philosophy, Operation Philosophy, Cause and Effect diagram, Flare and blowdown philosophy, isolation philosophy, Vent & Drain philosophy, shutdown philosophy.
• · Participation in Design Review, HAZOP Study, SIL Study, HAZID Study, ALARP, Bow Tie, MAHM, RAM Study, Alarm Rationalization workshop, SIMOPS, Constructability review carried out during various stages of project.
• · Review Hazop Report, SIL Assessment & Verification Report & Responsible for Closure of all Hazop & SIL Study Recommendation
• · Preparation & Implementation of checklist for all Process Documents
• · Management of Process Discipline Engineers Team for development of Process Design of Major Projects from feasibility studies through Conceptual Design to Detail Engineering.
• · Pre-Bid, FEED & Detailed Design documents review.
• · Maintain Design integrity and quality within the Process Engineering Team.
• · In-house Engineering Activities and Process Engineering Man Hours Estimation and Schedule.
• · Preparation, Monitoring and Control of Process Engineering Document Control List and expedite for delay/ approvals/resolution of open issues.
• · Responsible for Process Engineering Execution Methods and Procedure, Process Engineering Disciplines Co-ordination, Process Engineering Deliverables delivery for Project Execution, Process Man-hours Monitoring, Attending design review Meetings with Clients and Package vendors, PSSR+HAZOP+SIL study.
• · Inter Discipline Review of other Discipline Documents including vendor documents, GA drawings, Instrument data sheets etc for consistency, quality and Design Integrity.
• · Review of Authority submission documents like Fire Fighting Calculations (Fire & Foam network hydraulic and Surge Analysis, Fire Fighting Design Philosophy).
• · Development & Review of automated excel spreadsheets for process calculations.
• · Preparation, Monitoring and Control of Engineering Document Control List and expedite for delay/ approvals/resolution of open issues.
• · Review and ensure that all Process works are carried out in accordance with project specification. Maintain Design integrity and quality within the Process Engineering Team.
• · Preparing Process Engineering schedule and Process Engineering Man hours estimation to meet project requirements.
• · Co-ordinate with other Discipline for Process Inputs and ensure seamless Inter Discipline co-ordination between Process and other Discipline.
• · Job assignments, Mentoring and Supervision of works for Process Designers and Design Engineers.
• · Technical assistance to construction activities and attending to Site Queries.
• · Reviewing Vendor Drawings for Equipment’s and Instruments in terms of Process.
• · FEED & Pre-Bid works which involves Feasibility study.
• · Participates in discipline and inter-discipline design check and screening meetings for compatibility, completeness, and correctness in works.
• · Implement HSE objectives, policy, and company HSE procedures within his authority limit.
• · To integrate Risk-based thinking and HSE considerations into business decisions, plans and operations with the commitment to eliminate and reduce HSE hazards, aspects and risks.
• · To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.
• · To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects, and risks.

Requirements

• · Preferably Bachelor’s Degree in Chemical Engineering
• · Preferably to 15 years in Oil & Gas industry

Software Requirements

• · Proficient in Pipenet, Hysis, MS Excel, MS Word

Code Knowledge

• · API 2000, API 520, API 521, API 526, API 2350
• · SS 532
• · NFPA 11, NFPA 13, NFPA 15, NFPA 20, NFPA 30

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Summary:

The Design Executive reports to the Project Manager and is responsible for creating, interfacing and facilitating design drawings throughout projects' life cycles based on contract drawings and latest information as well as facilitate the flow of information between the design team and project team.

Job Description:

• Prepare, manage and facilitate design drawings using BIM and CAD technologies for building construction
• Take charge of all coordination works of structural and architectural interface with main contractor(s) and other trades for cross-team support
• Ensure all models are compatible and BIM data are made available to all project participants
• Collaborate within design team and other relevant departments to ensure all drawings are in order as per design requirements
• Manage design changes and revisions, resolve discrepancies and queries between design and project teams
• Attend site meetings as required
• Any other tasks as may be assigned from time to time

Job Requirements:

• Diploma/Degree in Architectural/Civil/Structural Engineering or equivalent
• Minimum 5 years of related work experience in similar capacity for construction and architecture projects
• Proficient in MS Office, Tekla, Revit, Navisworks and AutoCAD software
• Knowledge of DGN, DWF, IFC and MicroStation
• Knowledge of native formats of BIM authoring or BIM related applications for design reviews
• Fluent in English with good interpersonal skills
• Strong project management and decision-making skills

School of Electrical and Electronic Engineering is one of the founding Schools of the Nanyang Technological University. Built on a culture of excellence, the School is renowned for its high academic standards and research. With over 3,000 undergraduates students and 1,000 graduate students it is one of the largest EEE schools in the world and ranks 10th in the field of Electrical & Electronic Engineering in the 2024 QS World University Rankings by Subjects.

Today, the School has become one of the world’s largest engineering schools that nurtures competent engineers and researchers. Each year, the School graduates over a thousand students who are ready to take on great ambitions and challenges.

For more details, please view: https://www.ntu.edu.sg/eee

We are looking for a Research Fellow to support the research for the project titled: Resistive Memory Endurance Enhancement Utilizing Smart Mitigation and Recovery Techniques.

Key Responsibilities:

The Research Fellow will work on the assigned project to conduct the research on development of resistive circuits design. The candidate must have good experience in the areas listed below, possesses excellent skills. The roles of this position include:

• Development of robust resistive circuits design
• Test chip design and layout
• Good testing skills

Job Requirements:

• PhD degree in Electrical and Electronic Engineering or related field
• Expertise in resistive memory circuits design
• Excellent publication track record is an advantage
• Test chip design and testing experience are advantages
• Excellent verbal and written communication skills

We regret to inform that only shortlisted candidates will be notified.

Responsibilities:

• Lead RTL design, simulation, and verification for company ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description

• Develop and create 2D and 3D piping layouts, plans, isometrics, ensure that piping designs are optimized for efficiency, ease of maintenance, and compliance with project and industry standards
• Create detailed piping layouts and general arrangements for the plant, ensuring that pipe routing minimizes interference with other disciplines (civil, mechanical, electrical) and optimizes space utilization
• Collaborate with stress engineers to ensure pipe routing and support arrangements can handle thermal expansion, seismic loads, and pressure differential
• Prepare detailed piping design deliverables, including pipe routing layouts, support details, isometric drawings, and bill of materials (BOM). Ensure designs comply with all relevant standards
• Collaborate with process, mechanical, civil, and electrical teams to ensure seamless integration of piping designs with other plant systems
• Work closely with the procurement team to prepare piping material specifications, liaise with suppliers for quotation and support vendor evaluations for piping components (valves, flanges, supports, etc.)
• Review piping installation drawings and provide feedback for improvement to ensure constructability
• Conduct site visits as needed to verify piping installations are in accordance with the approved designs

Requirements

• Diploma/Degree in Mechanical Engineering
• For Degree holder, minimum 5 years of experience in piping design. For Diploma holder, minimum 8 years of experience is required. For senior position, candidate must have at least 10 years of experience
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• In-depth knowledge of piping design codes and standards (ASME, ANSI, PUB regulations)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping design & drafting tools and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

• Proficient in AutoCAD, PhotoShop and Sketchup, Enscape or VRay.
• Experience in design development, tender, specification and construction drawings.
• Excellent interpersonal and communication skills, self-motivated, hardworking, meticulous willing to work independently and as a team.
• Project Site Experience.

Requirements:

2-4 years relevant working experience.

Diploma/ Degree in Architecture or related field.

Responsibilities:

• Lead/Manage the project team to complete projects on time, on budget and according to client and authority's requirements.
• Manage multiple projects concurrently from design stage to project completion.
• Ensure project team's current workflow practices are in line with company standards and proposed improvements.
• Establish good working relationships with different parties to promote continued partnerships.
• Support the procurement of new business.

Job Description & Requirements

• Supports technical solutions
• Recognizes problems that are beyond capabilities and is learning from the experts in the area
• Supports new capital equipment purchases and implementation
• Supports cell layouts and process improvement initiatives
• General understanding of Six Sigma and lean tools to improve processes
• General understanding of Design for Manufacturability and Assembly (DFMA) concepts and supports new product introduction
• Represents the company with our customers
• Supports updates to management on operations status
• Learns the steps involved to incorporate process improvements
• Supports the manufacturing floor for any process related questions
• Creates and maintains process documentation and updates work order documentation
• Supports implementation of basic engineering changes
• Adheres to applicable Quality System requirements
• Supports Process Flow Charts, PFMEA, and Control Plans
• Learns from more senior Operations Engineers. May guide/direct Manufacturing Specialists.

Job Responsibilities:

• Able to plan / coordinate site works and resolve drawing details and discrepancies.
• Able to liaise with consultants and subcontractors.
• Able to work independently and as a key member of the Site Management.
• Ability to identify potential and occurring problems that affect the schedule of works at site and recommend solutions to relevant team/department.
• Review drawings for conflicts with Structural/M&E and liaising with consultants to resolve issues.
• Ensure all works are carried out within schedule and maintain the required quality.
• Ensure work safe environment at the work site and manage workers.
• Assist Construction/Project Manager in overseeing the daily construction and site coordination of different activities.
• Responsible for preparing, submission and monitoring of technical drawings, method of statements and shop drawings.
• To monitor the progress of work against the baseline schedule & preparation of daily records & monthly site progress reports.
• Responsible for general on-site technical and engineering matters.
• Quality Control.
• Co-ordination of works with subcontractors.
• Liaise with the consultants on technical and quality issues.
• Arrangement for inspection of works.

Job Requirements:

• Bachelor degree in Civil Engineering or related equivalent
• Required skill(s): MS Office, preferable candidate with AutoCad skills
• Minimum 2 years Site/Working Experience

• Oversee daily construction activities, ensuring compliance with safety regulations, quality standards, and project specifications.
• Collaborate with architects, engineers, and other construction professionals to develop project plans and schedules.
• Monitor project expenses, track budgets, and implement cost-saving measures where possible.
• Conduct regular site inspections to ensure that construction work meets design specifications and safety standards.
• Address and resolve any issues or delays that arise during the construction process.
• Maintain accurate records of project progress, changes, and communications with stakeholders.
• Ensure all work complies with local building codes, regulations, and company policies.
• Prepare and present progress reports to project managers, clients, and other stakeholders.

Qualifications:

• Bachelor’s degree in Civil Engineering from an accredited institution.
• Preferably with atleast 2 years of experience in construction engineering or a related field.
• Proficiency in construction management software (e.g., Procore, Buildertrend)
• Strong understanding of construction methods, materials, and legal regulations.
• Excellent problem-solving and analytical skills.
• Effective communication and leadership abilities.

Job Description :

• Project management and daily operations including inspections, handover, site measurements, project management.
• Prepare submission of shop drawing, method statement, progress claims and project management reports.
• Supervise and monitor projects are carried out in accordance to company's operating procedures, quality standards and contractual specifications.
• Ensure environmental, safety and health practices are carried out at all times.

Requirements :

• Candidate must possess at least a Diploma / Bachelor's Degree in Civil Engineering or its equivalent.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Min. 5 years of working experience in Construction Industry are preferred.
• Strong analytical and communication skills.

Responsibilities

Prepare project management plan and its sub-plans, such as: work scope statement, schedule plan, manpower plan, tools and equipment plan, procurement plan and OHSE plan

• Provide engineering support in project or plant maintenance • Coordinate internal and external audit review

• Engineering calculations associated with current carrying capacity of cables, wires, fuses and other circuit protective devices.

• Procedures for inspection, testing and certification of electrical fixed installations.

• Industrial hazards, safety and health precautions, and environmental concerns.

• Installation practice and regulations, and relevant codes of practice.

Requirements & Professional Skills•

Min. Diploma in Electrical Engineering or equivalent

Min. 0-1 year of relevant experience in electrical work

• Oversee daily construction activities, ensuring compliance with safety regulations, quality standards, and project specifications.
• Collaborate with architects, engineers, and other construction professionals to develop project plans and schedules.
• Monitor project expenses, track budgets, and implement cost-saving measures where possible.
• Conduct regular site inspections to ensure that construction work meets design specifications and safety standards.
• Address and resolve any issues or delays that arise during the construction process.
• Maintain accurate records of project progress, changes, and communications with stakeholders.
• Ensure all work complies with local building codes, regulations, and company policies.
• Prepare and present progress reports to project managers, clients, and other stakeholders.

Qualifications:

• Bachelor’s degree in Civil Engineering from an accredited institution.
• Preferably with atleast 2 years of experience in construction engineering or a related field.
• Proficiency in construction management software (e.g., Procore, Buildertrend)
• Strong understanding of construction methods, materials, and legal regulations.
• Excellent problem-solving and analytical skills.
• Effective communication and leadership abilities.

• Designing, developing and enhancing electro-mechanical systems and mechatronic devices.
• Creating automated systems and the software to control them.
• Conducting research, documenting findings, and presenting reports at meetings.
• Developing design documents for mechanical parts and final products.
• Identifying areas of weakness in the Equipment and making recommendations for improvement.
• Understanding problems or client briefs and developing solutions that satisfy them.
• Selecting the required tools and materials for the process.
• Assisting with recruitment, onboarding, and training of junior Engineers or Apprentices.
• Attending workshops, training sessions, and conferences to network with others and stay on top of field advancements.
• willing to do night shift
• any service requirement from the site must go and attend any time
• Willing to work Night Shift

• Develop and implement maintenance schedules for machinery and equipment.
  Ensure all maintenance and repair works adhere to specifications, are completed on schedule, within budget, and accurately documented.
  Liaise internally between operations teams to address machinery breakdowns and operational concerns.Coordinate data collection on auxiliary materials from operations teams and report on a weekly basis.
  Manage receipt, maintenance, and monitoring of machinery parts inventory.
  Collect machinery maintenance repair data and costs for analysis.
• Prepare monthly machinery reports detailing maintenance activities and performance metrics.Undertake additional tasks as required to support operational needs and project requirements.Preferably with at least 3 years of working experience in related field.
• Comfortable working in Workshop environment.
• Those who have experiences in machinery spare parts will have added advantage.
• Resourceful with positive attitude and able to work independently.

Job Responsibilities

1. Provide front and backend supports for the following security systems:

a. Access Control System – Integrated Security Management System (ISMS);

b. Electronic Key and Cabinet System: Key Management System (KMS);

c. Radio Communications: Digital Trunk Radio System (DTRS);

d. CCTV System – Video Surveillance Management System (VSMS);

e. Entry / Exit Access Turnstiles;

f. Crash Barriers; and

g. Vehicle Alert System

2. Perform corrective and preventive maintenance on all security systems.

3. Ensure critical system fault reported rectified within the shortest possible time to prevent disruption to operation.

4. Update and maintain fault rectification report.

5. Maintain security system stock inventory to ensure sufficient spare.

Job Requirements

• Meet the relevant Regulatory Authority's statutory requirement of minimum 21 years of age.
• Diploma/Higher NITEC/NITEC from a recognized training institute.
• Must be able to work rotating shifts, including weekends and public holidays
• Technical knowledge or experience in electrical/electronic work. IT Network knowledge would be an added advantage.
• Experience in CCTV or card access system.

• Oversee daily construction activities, ensuring compliance with safety regulations, quality standards, and project specifications.
• Collaborate with architects, engineers, and other construction professionals to develop project plans and schedules.
• Monitor project expenses, track budgets, and implement cost-saving measures where possible.
• Conduct regular site inspections to ensure that construction work meets design specifications and safety standards.
• Address and resolve any issues or delays that arise during the construction process.
• Maintain accurate records of project progress, changes, and communications with stakeholders.
• Ensure all work complies with local building codes, regulations, and company policies.
• Prepare and present progress reports to project managers, clients, and other stakeholders.

Qualifications:

• Bachelor’s degree in Civil Engineering from an accredited institution.
• Preferably with atleast 2 years of experience in construction engineering or a related field.
• Proficiency in construction management software (e.g., Procore, Buildertrend)
• Strong understanding of construction methods, materials, and legal regulations.
• Excellent problem-solving and analytical skills.
• Effective communication and leadership abilities.

ROLES & RESPONSIBILITIES

• To be responsible for all deliverables required in the agreement with Singapore General Hospital.
• To organize his team to align with the overall client’s expectation and contractual requirements andsupport the operations of the hospital, especially in the front end engineering and customersupports. To plan and execute all fix it and programmed maintenance within the frame work of theallocated resources.
• To plan the resources available to align with the operational requirements for fix it and programmedmaintenance.
• Managing all minor repairs and fix it work within the budget.
• Work closely with other service providers in the hospital to be part of the team to create a safe andsound environment for the patients, staff and visitors, especially ISS House Keeping and Portering team to demonstrate the strength and capability of ISS’s integrated service model to be productive, efficient and effective.
• Constantly engaging the client and end users to seek feed back, gaps and improvementopportunities through survey and dialogue.
• Responsible for overall customer and end users relationship management while exercising costcontrol monitor and measure with the awareness to generating additional works to enhancemargin.
• To stabilize the team during upon operations and continued to seek improvement in theorganization structure and operations process to improve supports to the hospital.
• Manage relationship with all specialist sub-con and contractors appointed by the hospital toachieve the required KPI, client’s expectations and deliverables in the contract with SingaporeGeneral Hospital.
• Be part of the team to management energy saving and initiatives.
• Identify engineering issues and trouble shooting to response to end users’ request. Resolving andmitigating potential engineering problems and potential cause to system breakdown. Work closelywith the Central Operations to tackle engineering problems.

JOB REQUIREMENTS

1. Contractual fulfilment of ISS for the outsourced facility management contract

2. Compliance of all statutory requirements

3. Successful mobilization

4. Achieve financial margin set by the management

5. Motivation and leadership of the outsources facility management team

6. Meeting KPI requirements and meet customers’ and end users’ expectations

7. Healthy QEHS records

8. Provide an safety environment to enhance the patient’s staff’s and visitors’ experience

SPECIFIC RESPONSIBILITIES:

• ensures all drawings, bills of materials, purchase requisitions and quality checks are completed as per project schedule and ISO 9001 & 14001 processes.
• conducts design reviews to analyze specifications, sketches, drawings, ideas, and related data to assess factors affecting component designs and the procedures and instructions to be followed.
• confers with customer representatives to review specifications and answer questions pertaining to installation of systems.
• supports during manufacturing, assembly, de-bug, and customer buy-off.
• writes technical reports, manuals and technical support documentation
• performs a wide variety of additional functions to meet project schedules and product deliveries
• reads, understands, and acts upon mechanical drawings including piece part and assembly drawings, work instructions, and procedures
• determines manufacturing methods, techniques, and procedures as required to perform tasks as required for to ensure designs perform as required
• designs test fixtures and setups as needs arise
• communicates with vendors to support procurement and to address issues
• Responsible for any other role as assigned by the Project Manager

QUALIFICATIONS & EXPERIENCE:

• Diploma or Degree in Mechanical / Manufacturing Engineering or an equivalent degree in related technical field desired
• 3 to 5 years relevant experience in mechanical engineering and material handling systems across various industries.
• AutoCAD and solid works proficiency
• Knowledge of design techniques, tools, and principle involved in production of precision technical drawings, and models
• Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to design and production
• Knowledge of design principles, steel and aluminum part creation, sub assembly and pneumatics.
• Ability to work independently in designing and liaising with customers on technical specifications and requirements
• Participate in and effectively communicate in group discussions and meetings
• Ability to work well in a team environment
• MS Office proficiency

-To Project management Coordinate with main-con and consultant for drawing submission, material sample submission and meeting with main-con and consultant

-Select appropriate electrical materials to complete designs such as MSB, Distribution lighting fixtures, cable tray layout, lighting and receptade layout, single line diagrams, CCTV, data Telcom operational routing diagram, ELV systems, control schematic and writing diagrams

-Identify discrepancies in tender/contract/IFC drawings and raise queries for clarification, A and A ( R and R) + Constriction Filed

- Attend all operational matters related to the daily running of the project and Handle multiple projects simultaneously

-Testing and commissioning for Electrical apparatus

-QA/QC documentation review of engineering deliverables

-LV and HV cables sizing calculations and prepare a bill of material

-Planning workforce arrangement and supervision and working planning

-Giving progress reports regularly to teams and monitoring project schedules

-Prepare Electrical shop and As-builts SLD Rcp drawing

Objectives:

· Supporting refurbishment projects within the Domestic Business Management Division.

· Support and execute business expansion plan.

· Overseeing engineering processes, ensuring technical standards are met

· Collaborating with cross-functional teams to deliver projects in a timely and cost-effective manner.

· To support refurbishment projects and business operations in the Singapore region.

· Ensure project quality, and act as a bridge between Japanese headquarters and local teams, fostering seamless communication and collaboration.

Job Responsibility:

1. Project Support:

- Plan, execute, and monitor refurbishment projects within the Capital Area.

- Assist in the execution of key projects, ensuring alignment with Japanese business standards and practices.

- Monitor project progress and report updates to stakeholders, ensure schedules effectively.

2. Technical Expertise:

- Provide technical input on refurbishment designs, materials, and processes.

- Conduct feasibility studies and risk assessments for refurbishment projects.

- Ensure adherence to industry standards, regulations, and safety protocols.

3. Collaboration and Communication:

- Work closely with internal teams, including procurement, operations, safety and quality assurance.

- Prepare and present progress reports, technical documents, and proposals in English and Japanese.

- Strong in Business Japanese communication and written skills to communicate with executives in Japan regional offices.

4. Administrative Duties:

- Handle documentation, reporting, and correspondence related to assigned projects.

- Coordinate meetings, schedules, and travel arrangements as necessary.

- Ensure all activities adhere to local regulations and company policies.

Requirements:

- A bachelor’s degree in business administration, Engineering, or a related field is typically required.

- Minimum of 3 years of experience in a business or engineering-related role.

- Strong communication and interpersonal skills.

- Ability to manage multiple tasks and projects effectively.

- Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint).

Responsibilities:

• Create mixed-signal verification and coverage strategies tailored to complex IC designs, aligning with design architecture and specifications.
• Construct verification testbenches using standard verification languages and methodologies, ensuring comprehensive coverage.
• Author and execute test cases to validate mixed-signal circuits, focusing on functionality, performance, and reliability.
• Analyze verification results meticulously, offering constructive feedback to design teams for improvements.
• Collaborate closely with design and layout teams to pinpoint and resolve any design issues encountered during verification.
• Innovate and refine verification methodologies, tools, and techniques to enhance scalability and portability.
• Provide final sign-off on mixed-signal designs, ensuring readiness for tape-out.

Requirements:

• Bachelor’s degree in electrical & electronic or equivalents and with minimum 7 years of working experience.
• Proficient in analog and mixed-signal circuit design and verification principles.
• Capability to formulate test plans, deliver presentations on findings, and communicate effectively with cross-functional teams.
• Familiarity with verification methodologies and tools including simulators, waveform viewers, automated execution, simulation time optimization, and coverage analysis.
• Proficient in programming abilities, capable of crafting efficient scripts or programs in languages such as Perl, Python, and/or C.

__________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Project Engineer Job Description

We are looking for a dedicated project engineer to assist with the scheduling, planning, forecasting, resourcing, and managing technical activities to ensure project accuracy and quality. The Project Engineer is responsible for the engineering and technical disciplines of ongoing projects and will establish inspection criteria for the proper implementation of all the elements of a project.

To be a successful project engineer, you should have the ability to work with multiple discipline projects and demonstrate excellent project management and supervision skills. You should also have excellent organizational, time management, leadership, and decision-making skills.

Project Engineer Responsibilities:

Preparing, scheduling, coordinating, and monitoring of assigned engineering projects.

Formulating project parameters and assigning responsibilities to the most capable

employees and monitoring the project team.

Interacting with clients, interpreting their needs and requirements, and representing them in the field.

Performing quality control tasks on budgets, schedules, plans, and personnel performance and reporting on the project's status.

Cooperating and communicating with the project manager and other project participants

and collaborating with senior engineers to create more efficient project methods and to maintain the project's profitability.

Reviewing the engineering tasks and initiating the necessary corrective actions.

Developing specifications for the project's needed equipment.

Creating frameworks to measure the project's metrics and data collection.

Establishing field test methods and methods for monitoring the quality of those tests.

Ensuring the project's compliance with the applicable codes, practices, policies, performance standards, and specifications.

Project Engineer Requirements:

Degree in engineering or a related field.

Minimum 3 or more years' field and project experience.

Excellent computer literacy and knowledge of design and visualization software.

The ability to work with multiple discipline projects.

Excellent project management and supervision skills.

Excellent organizational, time management, leadership, and decision-making skills.

Strong written and verbal communication skills.

Knowledge of applicable codes, policies, standards, and best practices.

Need to have engineering knowledge, comprehension of technical documents. Excellent written and spoken communication skills • Possess troubleshooting skills in engineering works • Proven leadership skills with a large and diverse workforce o Be able to work in a fast-moving environment, under pressure and long working hours, when needed.

We are looking for an energetic, trustworthy, and self-starter candidate who could be handy in paperwork preparation and supervision at the worksite, overseeing projects, maintaining safety protocols, and implementing site procedures. Our ideal candidate is experienced, responsible, and team-focused.

A Service Engineer’s responsibilities typically include installing, maintaining, and repairing machinery and equipment, ensuring optimal performance and customer satisfaction.

Job Description :

1. Equipment Installation: Assist in the installation and setup of various equipment at client sites.

2. Routine Maintenance: Perform scheduled maintenance checks on machinery and equipment to ensure optimal performance.

3. Troubleshooting: Diagnose and resolve technical issues promptly to minimize downtime.

4. Customer Support: Provide technical support to customers, address and resolve customer inquiries and complaints in a timely manner.

5. Quality Assurance: Ensure compliance with company quality standards and regulatory requirements during service operations. Adhere to all health and safety regulations and ensure compliance with industry standards.

Job Requirements :

• Diploma or degree in Mechanical Engineering, Electrical Engineering, or a related field.
• Minimum of 5 years of experience in crane service engineering or a related field.
• Familiar with hydraulic system & machinery electric system and understanding the hydraulic system theory.
• Basic knowledge of diagnosing defects and repair mechanical equipment such as heavy crawler crane, excavator or drilling rig, etc