Responsibility

• Responsible for high-performance block implementation (RTL to GDSII).
• Perform block level floor planning, power grid implementation, APR placement, timing optimization, CTS and routing.
• Close the design to meet timing, power budget and area targets.
• Run physical verification flows (DRC/LVS/EM/IR), and implement fixes to meet the requirements.
• Implement ECO’s to address functional bugs, timing and physical verification violations.
• Responsible for the generation and maintenance of block-level STA constraints and performing STA signoff checks.
• Responsible for timing model generation and supporting the successful integration of blocks into SOC.

Qualification

• At least 3 years of hands-on experience in digital-physical design.
• Bachelor/Master’s degree in Electrical Engineering with an emphasis in IC design
• Experience with digital Physical design and Static Timing Analysis
• Experience in floor planning and routing.
• Experience in advanced process nodes (5nm).
• Good experience with Synopsys implementation tools (DC, ICC2), and experience with Cadence (Innovus) implementation tool is a plus.
• Experience in Mentor Verification tool, Calibre.
• Proficient in TCL coding, Perl/Python knowledge is a plus.
• Good written and communication skills.

Job Responsibilities:

Project Design and Development:

• Lead the design process for civil/structural engineering aspects of deep excavation projects.
• Develop detailed geotechnical design plans, ensuring compliance with relevant codes and regulations.
• Conduct engineering analyses, including stability assessments and structural integrity evaluations.

Technical Leadership:

• Provide technical guidance and mentorship to junior engineers and design teams.
• Review and approve design calculations, drawings, and specifications.
• Troubleshoot and resolve complex design and construction issues.

Stakeholder Collaboration:

• Collaborate with multidisciplinary teams, including architects, contractors, and project managers.
• Liaise with clients, regulatory authorities, and other stakeholders to ensure project requirements and standards are met.

Quality Assurance and Compliance:

• Ensure that designs meet local regulations, safety standards, and best practices.
• Participate in audits, inspections, and peer reviews of design work.

Project Management:

• Manage timelines, budgets, and resources for design deliverables.
• Support the preparation of technical reports and documentation.

Job Requirements:

• Bachelor’s or Master’s degree in Civil/Structural Engineering or a related discipline.
• Recognized professional engineering qualifications by the Professional Engineers Board of Singapore.
• A minimum of 10 years of relevant experience in civil/structural engineering, with at least 5 years focused on designing geotechnical works for deep excavation projects.
• Proven expertise in handling projects of a similar size and complexity.
• Strong knowledge of geotechnical design principles, soil mechanics, and structural analysis.
• Proficiency in relevant design software and tools (e.g., Plaxis, AutoCAD, STAAD.Pro).
• Excellent communication, leadership, and problem-solving skills.

Preferred Qualifications:

• Chartership or equivalent professional accreditation (e.g., PE, CEng).
• Familiarity with Singapore’s construction and regulatory environment.
• Experience with risk assessment and mitigation for geotechnical designs.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

IC Designer, designing high frequency circuits targeting for transceiver applications, employing CMOS technology. The candidate needs to come up with novel architecture with speed, power, and area advantage compared to existing architecture.

The job also includes circuit design, pre and post-layout simulation, mask layout and PCB testing.

Qualifications

• Bachelor or Master degree in Electrical Engineering.
• Experience in EDA tools usage, including Cadence, Spectre, EMX, Synopsys, as well as Matlab.
• Some knowledge on communication system, such as BER, eye diagram, modulation/demodulation, pre-emphasis and etc.
• Open to Fixed Term Contract.

Job Description:

- Perform Civil, Structural Analysis and Design (entry-level) to meet project specifications

- Coordination and Liaise with Clients, Authority and Other Consultants, Contractors on Projects

- Ensuring Good Project Documentation and Submission to Authority and Clients

- Attend Project Meeting and Perform Inspections on Designed Works

- Reporting to Senior Engineer

Job Requirements:

- Candidate must possess at least a Bachelor's Degree / Post-Graduate Diploma / Professional Degree in Engineering (Civil/ Structural) or equivalent, recognized by Professional Engineering Board of Singapore

- At least 1 Year (s) of working experience in the related field is required for this position

- Good Working Attitude, Self-Motivated, Positive Thinking, Independent, Discipline, Attention to Details and Ownership of Tasks

- Familiar with Local Design Standard and Code

- Knowledge of Design Software, e.g., STAAD Pro, Plaxis, AutoCAD will be added advantage

- Candidate with longer experience or qualifications will be considered for Senior Positions

What you will do:

• Provides sales support to the engineering /sales team. Conducts engineering design and processes and / or financial analysis during project development. Generates take-off plans and specifications. Develops and writes estimates or proposals. May call on potential customers as directed by sales managers.

How you will do it:

• Perform drafting, design and prepare engineering drawings (2D) and documentation as per customer’s/project requirements.
• Create electrical schematic, Design layout plans and detailed designs with AutoCAD software.
• Provide pre-sales support to Sales team, including proposal costing and attending technical clarifications
• meeting and/or presentation with customers
• Products sourcing from suppliers.
• Compilation and submission of all documentations as required as per the project requirements.
• Review customer’s technical comments and revise documentation and drawings.
• Visual Inspection and quality check on products/Systems.
• Prepare Functional Test Documents and Assist Project Operations Team on functional testing.
• Liaise and maintain good relationship with customers, subcontractors and suppliers

What we look for:

• Min. Diploma/Degree in Electrical/ Electronic Engineering
• More than 5 years’ experience in Marine Offshore Protection System with related experience.
• Good knowledge of NFPA/Marine Classification Rules & Regulations
• Familiar with Fire & Gas Detection, Vesda Systems.
• Proficiency in AutoCAD and Microsoft Office especially Microsoft Word and Excel.
• Resourceful, results-oriented, excellent interpersonal skills and business acumen
• Able to work independently and deliver results for multiple projects under tight deadlines
• Willingness to learn new things.
• Basic knowledge OT systems, such as SCADA and DCS
• Basic understanding of cybersecurity concepts and best practices, including risk management, threat modeling, and incident response
• Excellent analytical and problem-solving skills
• Strong communication and collaboration skills

What we offer:

• Competitive salary
• Paid vacation/holidays/sick time
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

What you will do

• Responsible for physical design and development activities of MediaTek Ghz, AI processors and neural network DSP
• Involve in activities encompass physical design and analysis of complex and timing-critical AI processors and neural network DSP Technical disciplines include synthesis, floor-planning, place and route, RC extraction, timing, power optimization and physical verification
• Work closely with MediaTek colleagues in Taiwan and Singapore in implementation methodology co-development and flow deployment

What you will bring

• Bachelor/Masters Degree in Electrical/Computer Engineering
• High-speed NPU/GPU/CPU Subsystem RTL Integration experience or IP/Block/SoC Design experience is preferred
• Experience with Synopsys ICC2/FC (preferred) or Cadence Innovus tools from netlists to GDS
• Experience in high-speed processor implementation/power reduction flows and methodology from RTL to GDS (including synthesis, floor-planning, placement, CTS, routing, timing optimization, physical verification)
• Experience with power noise and reliability tools such as Redhawk and Voltus
• Experience with timing signoff tools such as PrimeTime and Tempus and timing closure tools such as Tweaker and PrimeClosure
• Knowledge of high-speed/low power IP and custom circuit design
• Good communication and scripting skills

Location: One North, Singapore

Important Note: This advertisement is not for immediate hiring but is intended to identify suitable candidates for future openings in this position.

About the company

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact.

Mechanical Design and System Integration: Lead the mechanical design of UPW and

wastewater treatment systems, including the selection and sizing of equipment such as

process vessels, pumps, compressors, heat exchangers, dewatering devices, and other

mechanical components. Ensure seamless integration of these components into the overall

treatment system.

ØEquipment Specification and Procurement: Prepare technical specifications for mechanical

equipment and work with vendors to procure the required components. Evaluate equipment

proposals and make recommendations based on technical and budgetary considerations.

ØProject Planning and Execution: Collaborate with project managers and other engineering

disciplines to plan and execute UPW and wastewater treatment projects. Participate in project

meetings, design reviews, and progress assessments to ensure project objectives are met.

ØMechanical Engineering Analysis: Perform engineering calculations, simulations, and

modeling to assess the performance and reliability of mechanical systems. Address technical

challenges and propose solutions to optimize system performance.

ØQuality Control and Compliance: Ensure that all mechanical designs and installations comply

with applicable codes, standards, and industry best practices. Conduct quality control reviews

to verify design integrity and safety.

Ø Cost Estimation and Budget Management: Collaborate with the project team to prepare cost

estimates for mechanical components and equipment. Identify cost-saving opportunities

where applicable.

Job Description:

- Perform Civil, Structural Analysis and Design to meet project specifications

- Coordination and Liaise with Clients, Authority and Other Consultants, Contractors on Projects

- Ensuring Good Project Documentation and Submission to Authority and Clients

- Attend Project Meeting and Perform Inspections on Designed Works

- To Lead and Mentor Junior Engineer in Performing Engineering Task

- Reporting to Principal Engineer / Management

Job Requirements:

- Candidate must possess at least a Master's Degree /Bachelor's Degree / Post-Graduate Diploma / Professional Degree in Engineering (Civil/ Structural) or equivalent, recognized by Professional Engineering Board of Singapore

- At least 4 Year (s) of working experience in the related field is required for this position

- Good Working Attitude, Self-Motivated, Positive Thinking, Independent, Discipline, Attention to Details and Ownership of Tasks

- Familiar with Local Design Standard and Code

- Knowledge of Design Software, e.g., STAAD Pro, Plaxis, AutoCAD will be added advantage

Job Description

• Takes the lead in identifying quality improvements and establish objectives to implement them
• Develop mechanical design drawings by applying sound engineering principles, with innovation, to meet design objectives
• Work with Sales team on conceptual design
• Review design to ensure product costing control and project schedule
• Ensure assigned machine must be test run before ship out handing over to customer
• Discuss and solve complex mechanical problems with manufacturing department, customers and suppliers

Job Requirements

• Diploma/Degree in Mechanical Engineering or equivalent
• Positive work attitude, willing to put in extra effort during peak period
• Able to work under tight schedule and under minimal supervision
• Strong communications skills
• Design experience in similar capacity, preferably in industrial Automation and Robotic Systems added advantage
• Working knowledge of Auto CAD
• Occasional travel maybe required

We regret that only shortlisted candidates will be notified.

Job Responsibilities.

• Electrical design for Industrial Automation Systems
• Discuss project specification with sale department, internal design team and customer.
• Ensures project specification is sufficient for electrical design work.
• Ensure the drawing, software and manual are done and issue to the customer
• Support sales department in design concept and costing for new enquiries

Job Requirements

• Diploma/Degree in Electrical & Electronics Engineering or equivalent
• Design experience in similar capacity, preferably in Industrial Automation Systems and Robotic Systems added advantage
• Candidates without relevant experience will be considered for junior engineer role
• Occasional travel maybe required
• Able to work under tight schedule and minimal supervision
• CAD knowledge such as solid edge, Auto CAD, Inventor

We regret that only shortlisted candidates will be notified.

Job Description

• Takes the lead in identifying quality improvements and establish objectives to implement them
• Develop PLC programming for Industrial Automation systems
• Work with Sales team on conceptual design
• Conduct program debugging and test run
• Update project schedule for programming, debugging, test run and installation
• Lead software design contractors on design, test run and installation
• Discuss and solve complex software related problems with customers and contractors

Job Requirement

• Diploma/Degree in Electrical Engineering or equivalent
• Positive work attitude, willing to put in extra effort during peak period
• Strong communications skills
• Design experience in similar capacity, preferably in industrial Automation and Robotic Systems added advantage
• Working knowledge of PLC & PC Programming Languages
• Able to work under tight schedule and under minimal supervision

We regret that only shortlisted candidates will be notified.

• We are a chip design service company invested by an international consortium and founded by a senior chip design technical team.
• The company is headquartered in Singapore and will take root in Singapore for long-term development.
• The company has strong R&D capabilities and its core technical team members all have more than 10 years of experience in chip design.
• We have rich industry experience and deep practical accumulation in ASIC design and business management.

Our office is located in one North and walking distance from MRT.

We Provide competitive salary and compensation package for the right candidate. We are work-life balance and friendly to employees with various benefit.

Job Description：

1. Works with the front-end design team to complete the chip floorplan , clock architecture, and powerplan .

2. Takes charge of the physical design tasks from the Netlist to the GDSII, including P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability and tapeout.

3. Researches the physical design methodology of advanced process nodes, and builds an automatic physical design platform.

Position Requirements:

1. Holds a bachelor's degree or above in electronic engineering, microelectronics, or computer science.

2. At least 5 years of work experience in the digital backend design field. Hands-on project experience is required. Tapeout experience at advanced technology is prefered. ( for excellect junior candidates with 3+ years experience will be considerated )

3. Those with experience in TCL , Perl or Python script development and familiar with EDA tool design will be plus.

4. Strong communication ability, good confidence and self-movitation.

5. Bilingual and with good teamwork spirit.

6. Salary is negotiable for excellent candidates.

About NSING:

As part of Nations Technologies Group, NSING was founded in 2018 in Singapore bringing high-performance semiconductor products and solutions to global semiconductor industry.

Our products includes General and Secure MCU, Secure IC for TPM (Trusted Platform Module), Bluetooth Low Energy BLE and BMS (Battery Management System). When you join NSING, you will be part of a talented team in the Singapore R&D Center where we develop high performance MCU targeting for Industrial and Edge AI applications.

Your Role:
As a SoC Design Verification Manager, you will be you would be leading a passionate team developing and deploying state-of-the-art verification methodologies in ever-increasing design complexities, from UVM, C co-simulation, to mixed-signal simulation and formal verification. You will be part of the Singapore team in developing high performance MCU.

• Lead and guide the team in fulfilling the overall project requirement.
• Act as a mentor to each team members both in fulfilling their tasks and personal developments.
• Develop detailed verification plans based on design specifications and architectural requirements.
• Create and maintain test benches for complex digital designs using System Verilog and UVM (Universal Verification Methodology).
• Write, debug, and execute test cases to verify functionality, performance, and power consumption of our SoC products.
• Collaborate with design engineers to identify, analyze, and resolve design issues.
• Conduct coverage analysis and drive verification closure to ensure all functional requirements are met.
• Continuously improve verification processes and methodologies to enhance efficiency and effectiveness.
• Participate in design and verification reviews, providing constructive feedback and recommendations.
• Stay updated with the latest industry trends and advancements in verification techniques and tools.

Your Skills and Experiences:

• Education：Bachelor's or Master's degree in Electrical Engineering, Computer Engineering, or a related field.
• Experience: 8 years+ prior industry experience of design verification including significant System Verilog and UVM usage with minimum of 3 years in management role.
• Technical skills

- Deep knowledge of digital logic design, SOC architecture and microarchitecture

- Proficient in simulation-based verification methodologies and languages such as UVM and System Verilog

- Skilled in developing and maintaining test benches, test cases, and verification environments

- Experience across the full verification cycle from initial planning to final tape out

- Preferred skills:

· Knowledge of low-power design techniques and verification methodologies.

· Knowledge of hardware-software co-simulation mixed-signal verification techniques.

· Knowledge of gate level simulation methodologies.

Other Skills:

• Good interpersonal skills crucial to managing team including by not limited to collaboration, listening, dependability and approachable.
• Strong analytical and problem-solving skills, with a keen attention to detail.
• Excellent communication and teamwork skills, with the ability to collaborate effectively in a cross-functional environment.
• Flexibility and adaptability and demonstrates ability to manage multiple tasks and projects, prioritizing effectively to meet deadlines.

Founded in 2006, IGG is a leading global mobile games developer and publisher committed to making amazing innovative games for players all over the world. Our games are available in 23 different languages, and are enjoyed by 38 million monthly active users from over 200 countries and regions.

At IGG, we are innovators at work, gamers at heart.

We are currently on the lookout for a Game Design Intern to join us!

Responsibilities:

Collaborate with the game design team to create game concepts, mechanics, and systems

Assist in designing and balancing game levels, and challenges

Conduct playtesting and provide feedback on game mechanics and user experience

Assist in creating and maintaining game design documentation and spreadsheets

Requirements:

Has education background in game design or game development

Proficiency in Unity is a bonus.

Excellent communication and teamwork skills.

Ability to work independently and take initiative.

What’s in it for you!

Excellent projects and team members conducive to personal growth

Vibrant work environment

Well stocked pantry

Job Responsibilities

• Develop CAD from rough sketches/Produce drawings, documentations on electrical design
• Interpret and assist with technical proposals
• Assist FAT system at workshop
• Take initiative to resolve all the challenges encountered during the process of project
• Organize, manage and maintain proper documentations including project administrative
• Work with senior designer from inception to completion of project

Requirements

• Nitec/higher Nitec/Diploma in related field
• Fresh graduate who are willing to learn are welcome to apply
• Relevant 2-3 years working experience in the Maritime or similar industry preferred
• Candidates with administrative experience are welcome to apply
• Knowledge in PLC
• Proficiency in AutoCAD
• Good written and communication skills

Other Information

• 5 Days/ Monday to Friday
• Friendly & dynamic working environment

If you possess what it takes, we invite you to submit in a detailed and current resume stating current / expected salary and availability date.

The Job

• Develop timing/power/noise characterization flow for advanced node memory compiler.
• Strong focus on design automation for SRAM compiler, big data analysis and design verification.
• Develop memory analysis flow for PPA check.
• Design and develop the layout for integrated circuits according to electronics engineering principles, using software to create design schematics and diagrams.

The Talent

• Bachelor's Degree (with min. 8 years of relevant industry experience) /Masters Degree (with min. 6 years of relevant industry experience)/ PhD in Electrical and Electronic Engineering/Computer Engineering/Computer Science.
• Knowledge of SRAM/ROM memory functionality and high speed, low power memory design architecture.
• Experience in spice simulation and understand CMOS layout view, Verilog coding is preferable.
• Proficient in script programming with Perl or Python3.

The Role

This position will work with Asset Managers in leading all aspects of design development works, including overall development management of new developments and existing assets across different sector classes ranging from commercial, retail, residential, industrial and logistics projects.

Job Responsibilities

• Conceptualise all development design requirements including preliminary massing, schedule of areas and specifications and formulate design briefs to ensure that these are aligned with the Company’s development strategy.
• Manage and control the development of design concepts/options, pipelines for the projects and to ensure these options/concepts are delivered on time and meet the Asset Manager’s Requirements.
• Manage the design consultants and liaise with all relevant authorities to meet the Company’s development strategy and Asset Manager’s requirement.
• Accountable and responsible for the management of the design development process from inception to completion.
• Ensure that the design meets the required quality and in compliance with regulatory requirements and corporate governance.

Job Requirements

• Master and/or Degree in Architecture.
• At least 8 years of relevant design development experience in the execution of Commercial, Retail, Residential, Industrial and Logistics projects, with the ability to draw, design and articulate key construction details for the building.
• Candidate with experience in Japan, Hong Kong, South Korea, or Vietnam projects is preferred.
• Technical skills in Autocad, Revit, Sketchup, Adobe in Design, Adobe Photoshop, Adobe Illustrator, Rhino, Grasshopper.
• Knowledge of parametric design and ability to write scripts would be an advantage.
• Technical skills in producing and developing architectural details and specifications.
• Seeks continuous improvement to design and processes through consistently challenging the status quo or value engineering the optimum solution to all aspects of the development.
• Ability to encourage the creation of solutions appropriate to the needs of Business Units, shareholders and environment.

We encourage you to apply if your work experiences and career aspirations are aligned to this position.
To learn more about Mapletree and explore other opportunities, please visit https://careers.mapletree.com.sg/

Mediatek’s Memory Design Automation team is looking for fresh talent to join us as a modeling engineer for the development of behavioral, FPGA, timing and DFT simulation models. The role will be required to create, debug and optimize SRAM models for ASIC design flow.

The candidate must be a team player, able to communicate clearly and concisely to deliver quality work on time.

About the team:

The Mediatek’s Memory modelling team collaborates with the world-wide memory design teams to create and qualify front-end models for use in the ASIC design flow. Team members will also be expected to perform circuit design verification to ensure memory circuits robustness.

What you do:

• Develop and integrate automation code into existing memory compilers to generate models meant for ASIC design flow.
• Develop automation flow and scripts with Perl or Python.
• Execute EDA tools from vendors such as Synopsys, Mentor to verify models’ correctness.
• Stay up to date with current modeling standards and development to improve models and flows for better memory IP performance.
• Work with memory design, compiler team and DFT team and tool vendors to resolve model issues and find solutions.
• Design and develop the layout for integrated circuits according to electronics engineering principles, using software to create design schematics and diagrams.

What you bring:

• Must have a Bachelor’s degree or higher in Electrical Engineering, Electronics Engineering, or related discipline with at least 3 years of semiconductor industry experience.
• Have at least 3 years experience using Linux systems.
• Good understanding of verilog syntax and its various aspects, such as behavioral, RTL and synthesizable verilog is a must.
• Good understanding of liberty timing syntax.
• Good understanding of upf and system verilog.
• Knowledge and experience with EDA simulation tools such as VCS, NC is required
• Experience with EDA tools will be helpful:

o DFT: Logicvision, Tessent, Fastscan

o Synthesis: Design compiler, Genus

o Simulation tools:VCS, QuestaSim, NC

o STA tools such as PrimeTime

• Good scripting and flow automation skills, in Perl or Python.
• A team player, meticulous, able to work and learn independently are important attributes for this job.

Location: One North, Singapore

- assist in managing the contracted services for repair, preventive maintenance and/or new construction of building facilities and grounds to ensure compliance with statutory and user requirements.

- develop and direct initiatives to maintain and operate building facilities and systems to meet building operational requirements and ensure safe system operations.

- Other duties include rendering technical assistance with regard to maintenance planning, budgeting for projects and ensuring timeliness and cost-effectiveness of projects.

- Required Skill(s): AutoCAD, project management, good communication skills, good personal-relationship skill

- Preferably Junior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.

- assist in managing the contracted services for repair, preventive maintenance and/or new construction of building facilities and grounds to ensure compliance with statutory and user requirements.

- develop and direct initiatives to maintain and operate building facilities and systems to meet building operational requirements and ensure safe system operations.

- Other duties include rendering technical assistance with regard to maintenance planning, budgeting for projects and ensuring timeliness and cost-effectiveness of projects.

- Required Skill(s): AutoCAD, project management, good communication skills, good personal-relationship skill

- Preferably Junior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.

- assist in managing the contracted services for repair, preventive maintenance and/or new construction of building facilities and grounds to ensure compliance with statutory and user requirements.

- develop and direct initiatives to maintain and operate building facilities and systems to meet building operational requirements and ensure safe system operations.

- Other duties include rendering technical assistance with regard to maintenance planning, budgeting for projects and ensuring timeliness and cost-effectiveness of projects.

- Required Skill(s): AutoCAD, project management, good communication skills, good personal-relationship skill

- Preferably Junior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.

Under administrative supervision of the Technology, this position is responsible for the deployment and maintenance of a cloud-based applications infrastructure.

Responsible for deploying, automating, maintaining, troubleshooting and improving the systems that keep the backend infrastructure running smoothly. The role requires you to have hands-on technical experience and a can-do approach towards environment automation / management and continuous improvement.

Job Duties:

• Deploying, automating, maintaining, and managing AWS cloud-based production system, to ensure the availability, performance, scalability and security of productions systems.
• Build, release, and configuration management of production systems.
• Pre-production Acceptance Testing to help assure the quality of our products / services.
• System troubleshooting and problem solving across platform and application domains.
• Suggesting architecture improvements, recommending process improvements.
• Ensuring critical system security using best in class cloud security solutions.
• Evaluate new technology options and vendor products.

Skills and Requirements:

• Bachelor’s degree in computer science or other equivalent technical discipline.
• 1+ years’ experience with using a broad range of AWS technologies (e.g., EC2, RDS, ELB, EBD, S3, VPC, Glacier, IAM, CloudWatch, KMS) to develop and maintain an Amazon AWS based cloud solution, with an emphasis on best practice cloud security
• AWS Certified Solution Architect (Associate) is preferred.
• Conversant with infrastructure definition tools such as Cloud Formation and Terraform
• Experience as a DevOps Engineer in a 24x7 uptime Amazon AWS environment, including automation experience with configuration management tools.
• Scripting Skills: Strong scripting and automation skills.
• Operating Systems: Windows and Linux system administration.
• Monitoring Tools: Experience with system monitoring tools.
• Problem Solving: Ability to analyze and resolve complex infrastructure resource and application deployment issues.
• Experience with other Clouds such as Azure or GCP can be considered.

Note: Proceeding to apply on this job post means you have read, understand and agreed to WPH DATA PROTECTION NOTICE FOR JOB APPLICANTS in the link below.

https://www.wphdigital.com/notices

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

In 2021 the Singapore Hybrid-Integrated Next-Generation micro-Electronics (SHINE) Center was established.

One of the projects in SHINE focuses on developing the technology and demonstrating Radio Frequency (RF) and microwave applications on flexible substrates.

As part of this project, we have a position for a research engineer with proven knowledge and experience in researching, designing, and testing of microwave circuits and subsystems.

Qualifications

• Possess a Bachelor or Master degree in Electrical Engineering
• Experience in the simulation and design of microwave circuits and subsystems.
• Experience with tools such as ADS and HFSS.
• Experience with measurement of microwave circuits using VNAs.
• Able to work independently and in a team.
• Open to fixed-term contract.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Electrical and Computer Engineering (ECE) Department of National University of Singapore (NUS) is looking for applicants for research engineer positions to support 3D-IC package fault localisation and failure analysis (FA) techniques with ANSYS High Frequency Structure Simulator (HFSS). The applicant will work closely with our researchers to understand and derive insights from scientific experiments and data. The applicant will also assist in the design and development of a physical test vehicle for the measurement of simulated results.

Responsibilities will include:

1. Contribute to defect classification and localization through simulation defect modelling.
2. Involve in 3D-IC forward predictive modelling (i.e. include chip and circuit blocks) by generating training materials.
3. Design of mock IC test vehicles for high frequency electromagnetic and DC magnetic field measurement and testing.

Qualifications

• A bachelor’s or higher Degree in Electrical, Electronics, Mechanical, Chemical Engineering, Physics, Material Science or its equivalent from a reputable University/Institute is preferred, or equivalent related experience.
• Candidate with experience in microelectronic research, characterisation, metrology, electrical testing, FA and strong in data analysis will have advantage. Knowledge of AI/ML/DL development and ANSYS/TCAD modelling.
• Strong analytical and problem-solving skills.
• Motivated and possesses effective communication skills including writing and presenting.
• Ability to work independently and collaborate within a diverse team.
• Open to Fixed Term Contract.

Seeking a meaningful design internship?

Expand Your Creative Limits with APT811: Where Design Meets Innovation

We’re seeking a design intern to join our small, lean team. Our goal is to give motivated designers the chance not just to be creative but to be strategic and thinking designers.

Needed: Basics in graphic communication design, visual hierarchy, Adobe CC (Photoshop, Illustrator, InDesign), and Figma.

This role is for those ready to integrate AI into design and work closely with our founders. It is ideal for individuals with a growth mindset looking to improve their design strategy and execution.

Our four pillars guide your growth: technical skills, strategic thinking, personal growth, and social influence. Progress through a structured path to develop your abilities.

What’s in it for you at APT811:

• Use professional AI design tools
• Create impactful designs with clarity
• Learn effective brand communication
• Strengthen your growth mindset
• Access a wealth of training resources

Work Responsibilities

As an intern at APT811, you will play a vital role in our team, contributing to various projects and honing your skills. Your responsibilities will include:

Brand Communication and Research:

• Work on brand communication touchpoints.
• Conduct research using AI tools like Custom GPT, Midjourney, and SEMrush (SEO).
• Analyse market trends and competitor strategies.

Design and Development:

• Create brand and campaign collaterals.
• Design brochures, posters, digital ads and various touchpoints.
• Ensure all designs align with brand guidelines.

Workshop Facilitation:

• Assist in planning and organising design thinking workshops.
• Support facilitators during sessions.
• Engage with participants and gather feedback.

Proposal and Presentation Support

• Help draft and design brand proposals.
• Contribute creative ideas and concepts.
• Develop visual narratives for presentations.

Continuous Learning and Application:

• Learn and apply new design software and tools.
• Participate in brainstorming sessions.
• Engage in training sessions and workshops to improve your skills.

If you have a growth mindset, like strengthening your resilience and thinking strategically, we'd like to work with you!

Apply today and do good with design together.

www.apt811.com | www.thinkroom.sg