Supervise ongoing projects and assist in design office i.e. resolve all technical issue

· Assist in all AC jobs/projects/contract

· Review all the design/checking of calculations for the company

· Represent the company, advise the same and act on its behalf to enable the company to perform its contractual obligations for the projects, as spelt out in the contract documents

· Act on behalf of the company to maintain reputation and goodwill with the clients

· Assist the Managing Director in subsequent tendering of projects and other contracts including but not limited to government projects, private projects, overseas projects

· Attend all site meetings with clients, contractors, QP Design and relevant authorities on matters related to the projects

· Attend meetings with Managing Director on regular basis with the view to report on matters related to the projects and assist in the resolution of issues which may affect the performance of the company in discharging its contractual obligations to the clients

· Promote the employer’s profile and capabilities in the procurement of projects and business development

· Be a management representative of the company for both site and office projects

· Review the design/checking of calculations

· Carry out planning, design drafting, cost estimate etc for the company’s project

· Prepare proposal and performance on tendering works for Consultancy

· Oversee authority’s submission and update of each project

· To cover duties for other Senior/ Design engineers

· Assist in technical design and drafting

· Any other ad-hoc duties as assigned by superior

Criteria:

• Design Engineer (SDE) shall be an engineer in the civil/structural discipline with at least a degree recognized by the Professional Engineers Board of Singapore
• At least ten (10) years of relevant experience on Civil & Structural projects
• Able to problem solve and manage projects

Job Title -Plumbing Site Engineer

Job Description & Requirements.

1. Involve in Programming, Scheduling, and Progress tracking of projects·

2. Co-ordinate with Site Supervisor and Sub-contractors on progress matters and prepare monthly and weekly reports·

3. To develop, monitor, and review equipment and manpower deployment plans for project sites·

4. To perform monthly/weekly/daily project progress reporting activities·

5. To monitor the progress of projects and Update the management for any schedule variances·

6. Act as a point of contact and communicate project status to all participants·

7. Any other ad-hoc assignment being assigned from Superior·

8. Knowledge of Plumbing/Sanitary Works an added advantage.

Requirements:·

1. Diploma or Professional Certificate in Engineering (Mechanical) / Construction or equivalent.·

2. Min 1 years experience in similar experience and managing a few sites.·

3. Excellent communication and presentation skills.·

4. Knowledge in project management.·

5. With BCA BCPPF qualifications is an advantage.

6. Knowledge of Plumbing/Sanitary and Gas as an Advantage.

Responsible:

• Ensure the proper functioning of electrical systems on ships, including generators, motors, switchboards, and electrical distribution panels, by performing routine maintenance tasks.
• Quickly identify and diagnose electrical faults or malfunctions in onboard systems, including propulsion systems, power generation, and safety equipment, ensuring minimal downtime for the vessel.
• Oversee the installation of new electrical equipment and systems on vessels, ensuring compliance with marine safety standards and company protocols.
• Perform emergency and scheduled repairs to electrical systems, ensuring that all repairs meet industry safety and performance standards.
• Ensure that all electrical work adheres to safety standards, maritime regulations, and environmental laws. This includes ensuring compliance with SOLAS (Safety of Life at Sea) and MARPOL (International Convention for the Prevention of Pollution from Ships) regulations.
• Monitor the operation of power generation equipment such as diesel generators and alternators to ensure they are running efficiently and meet the vessel’s power demands.
• Maintain and troubleshoot electronic control systems used in various marine applications, including engine control, ballast control, and navigation equipment.
• Develop and implement preventive maintenance schedules for electrical systems, ensuring the longevity and reliability of the equipment. This involves regular inspections, testing, and servicing.
• Provide guidance and training to junior engineers and vessel crew on the proper use, troubleshooting, and maintenance of electrical systems.
• Keep detailed records of all maintenance activities, repairs, and upgrades performed on electrical systems. Ensure that all electrical work is documented in compliance with company procedures and regulatory requirements.

Requirements:

• Min Diploma or equivilant; technical certification or associate degree in Marine Mechanics or related field.
• Minimum of 2 years of experience in Marine service and repair.
• Strong mechanical attitude and problem-solving skills.
• Proficiency with diagnostic tools and marine service equipment.
• Ability to lift heavy objects, work in various weather conditions, and perform physically demanding tasks.

We require an experienced and skilled Assistant Electrical Engineer for our Solar Division. The ideal candidate should possess at least 10 years of experience in the industry.

Job Description

1. Ability to perform site assessment for Solar Projects.
2. Perform accurate system sizing calculations & shading analysis.
3. Run PVSyst repors for system production estimates.
4. Ability to work independently at site for all spectrums (Power, Lighting, Panel Terminations, Cable Routing, Busway, Public Address, Fire Alarm, CCTV).
5. Adept in risk management for Solar projects.
6. Perform Electrical, Mechanical and software component inspections, testing, repair and troubleshooting, in accordance to its specifications.

Job requirements

1. Possess at least a Technical Certificate in Electrical and/or Mechanical Engineering.
2. Must Possess at least 10 years of experience in Solar Projects with at least a 50-100MW installations.
3. Ability to manage the projects.
4. Able to commit to long hours when necessary.

Key Responsibilities include:

· Knowledge and hands on experience in implementing virtualization network

· Working experience for industrial Cyber Security would be a plus

· Configure, maintain and troubleshoot Honeywell Experion hardware and Software

· Implement and Admin EPKS & TPS Domains, controllers (HPM, C200/C300), switches etc.

· Support Honeywell FTE, and Microsoft Technologies

· Support client server architecture

· Perform preventative and corrective maintenance of system hardware/software/networks

· Assist clients with third party vendor communication to our systems

· Administer preventive maintenance on controls systems

· Provide technical support to customers and serve as customer contact for service related issues

· Be able to respond to emergency calls as part of a 24/7 roster service and resolve them within the guidelines that meet or exceed our contract customer expectations and requirements

· Program code logic including system configuration / implementation and troubleshoot existing code. Support Factory Acceptance Testing, Site Acceptance Testing and startup activities including equipment checkout.

· Perform audits and baselines of installed systems to help with migrations and trouble shooting

· Team Player, comfortable with being the lead support person on site.

· The ability to accurately document work performed.

· Knowledge of other systems such as TDC / TPS, PHD, DOC4000, FSC, DVM or others a bonus

· Support / lead projects from preliminary engineering, detail design, startup. Have capability to lead others to accomplish all project goals and objectives.

· Knowledge and experience with process instrumentation would be beneficial

· Must be able to take ownership and responsibility for work and actions

Basic Qualifications:

· Bachelor’s degree in with Chemical Engineering / Automation Control

· Minimum of 5 years’ field experience

· Preferable with working experience in Experion (TPS, PHD, FSC an advantage)

· Be comfortable leading system migrations between releases.

· Work independently on life system

· Certificate on Virtualization would be a plus

· Demonstrated effective oral and written communication and interpersonal skills.

Responsibilities:

• Incumbent to be involved in all stages of projects including but not limited to concept, schematic design, detail design, documentation to constructions.

• To participate in production, service, installation, FAT, SAT, HAT, Field construction, Plant commissioning, Sea Trials, and Inspection of supplied products.

• Must be able to perform technical evaluation of installation control and design interface documents of equipment to ensure successful implementation of designs.

• Supervises Technician in the production, service, repair, installation, and commissioning work.

• Incumbent must be able to plan, direct and execute Project Activities.

• To handle overall planning & implementation of projects to ensure timely delivery.

• Must be able to prepare and endorse the service reports and relevant documents.

• Ability to maintain good project documentation and is familiar with ISO documentation requirements such as Job Safety Analysis, Work Method Statement and Permit to Work Application requirements and procedures.

• Supervises and control site activities to ensure shipyard contractors perform and complete projects in a safe and timely manner that is within the approved budget without compromising quality.

Requirements:

• Min Dip in Electronics or Mechatronics or Marine Engineering with 3 years of working experiences.
• Electrical or Electronic knowledge an added advantage.
• Able to read and understand electrical diagrams
• Team Player

Queenie Chua

R24125459

Marine Engineer Responsibilities:

• Conducting research and tests to inform the design and construction of marine vehicles and equipment.

• Preparing technical reports such as research, systems diagnostics, and design analysis documentation.

• Presenting layout and engineering designs to clients and team members for analysis and feedback.

• Supervising all aspects of the design process for structural, mechanical, and electrical systems.

• Overseeing the construction of marine vessels and equipment to ensure their quality and integrity.

• Performing quality control inspections and tests on all systems and equipment and installing upgrades, as needed.

• Ensuring adherence to safety precautions and project timelines.

• Training and supervising engineering teams including designers, mechanics, and construction staff.

• Performing maintenance on marine vehicles and equipment.

• Investigating and diagnosing technical issues and implementing effective repairs.

Marine Engineer Requirements:

• Bachelor's degree in marine engineering or similar.

• Relevant USCG engineer license.

• Professional engineer (PE) certification preferred.

• A minimum of four years' experience as a marine engineer or similar.

• Experience with engineering design software such as AutoCAD, Rhino 3D, and SOLIDWORKS.

• Sound knowledge of maritime software such as HMI and PLC control systems.

• Familiarity with maritime HM&E systems and naval construction processes.

• Experience with a variety of engineering processes including mechanical, electrical, and software.

• Excellent analytical thinking and problem-solving abilities.

• Physically fit and able to work in strenuous circumstances and harsh weather conditions.

Responsibilities:

Equipment Maintenance and Repair

· Perform routine inspections, preventive maintenance, and repairs on specialized equipment.

· Diagnose and resolve technical issues promptly to minimize downtime.

· Collaborate with cross-functional teams to ensure equipment reliability.

Process Optimization:

· Identify opportunities to enhance equipment performance, efficiency, and safety.

· Implement improvements, upgrades, and modifications as needed.

· Monitor equipment metrics and analyze data to drive continuous improvement.

Technical Documentation:

· Maintain accurate records of equipment maintenance, calibration, and service history.

· Create and update technical manuals, procedures, and troubleshooting guides.

· Ensure compliance with industry standards and regulations.

Training and Support:

· Train operators and maintenance staff on equipment operation, safety protocols, and best practices.

· Provide technical support during equipment installations and commissioning.

Collaboration and Problem-Solving:

· Work closely with engineers, production teams, and vendors to address complex technical challenges.

· Troubleshoot equipment failures, identify root causes, and implement corrective actions.

Requirements:

· NITEC/Higher Nitec/Diploma in a technical discipline

· Those without the stipulated qualifications but with related technical experience are also welcome to apply

· Willing to work outdoors, at heights and on weekends

Queenie Chua

R24125459

Responsibilities:

· Lead the overall design process for the data centre, ensuring all architectural, structural, and MEP (Mechanical, Electrical, and Plumbing) elements are integrated into a cohesive design that meets the client’s requirements and project goals.

· Manage and guide the in-house design team, external consultants, and subcontractors, ensuring that designs are delivered on time, within budget, and to the required quality standards.

· Oversee the review and approval of all design deliverables, including drawings, specifications, and technical documents, ensuring compliance with local regulations, international standards, and project specifications.

· Act as the primary point of contact between the client and the design team, addressing client concerns, providing regular updates, and ensuring client satisfaction with design solutions.

· Identify design risks early in the process, working with relevant stakeholders to mitigate risks and resolve design-related issues in a timely manner.

· Drive innovation in the design process by recommending value engineering solutions, cost-effective design alternatives, and methods to optimize the functionality and efficiency of the data centre.

· Ensure the design complies with all relevant building codes, safety standards, and environmental regulations, as well as the requirements of regulatory bodies and local authorities.

· Develop and manage the design phase of the project schedule, ensuring that key milestones are achieved and that the project progresses on time.

· Work with the project team to establish and manage design-related costs, ensuring that the design process remains within budget and that resources are allocated effectively.

· Maintain accurate design documentation, ensuring that all changes, approvals, and communications are properly documented. Provide regular design progress reports to the Project Manager and stakeholders.

Requirements:

· Bachelor’s degree in Architecture, Civil Engineering, or a related field. A Master's degree or professional certifications (e.g., PMP, LEED, etc.) would be an advantage.

· Minimum 5-10 years of experience in design management within the construction industry, with a focus on large-scale, complex projects like data centres or commercial buildings.

· Strong understanding of design principles, architectural and engineering systems, and familiarity with data centre design requirements, including specialized systems like HVAC, electrical, and IT infrastructure.

· Proven leadership and team management capabilities, with the ability to coordinate and motivate cross-disciplinary teams. Excellent communication and interpersonal skills to liaise effectively with clients, stakeholders, and contractors.

· Strong ability to identify potential design issues early and implement effective solutions. Proficient in making decisions under pressure while maintaining project quality and client satisfaction.

Queenie Chua

R24125459

Will be part of Operation & Support Team to support Project implementation and Maintenance.

The key responsibilities are as below:

Job Description:

Project:

• Support Project Team in Project implementation
• System setup, configuration and testing
• Perform any other duties as assigned.

Maintenance:

• Perform CUAS Preventive and Corrective maintenance works at restricted Areas.
• Provide support services in operation exercise.
• Perform functional check and/or repair on testers and unit under Test.
• Perform any other duties as assigned.

Requirements:

• NITEC / Higher NITEC / Diploma in Mechanical, Electronics or Computer Engineering
• Fresh graduate are welcome to apply
• Experience in Electronics, PCB-related, electrical & networking would be advantageous
• Able to work over the weekend and standby for fault call if required
• Able to interpret schematics, technical manual and drawings for maintenance works.
• Ability to use analytical skills and a "hands-on" person.
• Good interpersonal skills, proactive and work well with others.
• Possess class 3 driving license will be advantageous.

Interested candidates can click on 'Apply' or send updated resume to [email protected]

We are regret that only shortlisted candidates will be notify

Job Scope:

• C# Development:
  • Develop web applications using C#, ASP.NET MVC, and .NET Core frameworks.
  • Apply MVC architecture principles to ensure clean, maintainable, and scalable solutions.
  • Implement secure and high-performance features in web applications.
• Web Application and API Development:
  • Design and maintain RESTful APIs for integration with web, mobile, and external platforms.
  • Optimize and troubleshoot existing APIs to ensure high performance and reliability.
• Mobile App Development:
  • Build cross-platform mobile applications using Flutter and Dart.
  • Ensure smooth integration between mobile apps and backend services.
  • Enhance mobile app performance and user experience through optimization techniques.
• Navision 365 Development:
  • Customize and extend Microsoft Dynamics 365 Business Central (Navision) to meet business needs.
  • Develop custom modules, workflows, and reports in Navision 365.
  • Troubleshoot and resolve Navision-related issues to ensure system reliability.
• Database Design and Management:
  • Design and optimize relational database schemas (e.g., SQL Server, MySQL)
  • Write efficient and secure database queries, stored procedures, and scripts.
• Testing and Quality Assurance:
  • Perform unit and integration testing to ensure code quality and functionality.
• Documentation:
  • Create/Maintain comprehensive technical and user documentation for developed solutions.

Requirement:

• Degree in Computer Science or related field
• Minimum of 2 years of professional development experience in C# and .NET technologies.
• Strong proficiency in C#, ASP.NET MVC, and .NET/ .NET Core.
• Experience with MVC architecture and building scalable web applications.
• Hands-on experience developing RESTful APIs and backend services.
• Knowledge in Flutter and Dart for cross-platform mobile app development.
• Knowledge in Microsoft Dynamics 365 Business Central (Navision) customization and integration.
• Solid knowledge of relational databases (e.g., SQL Server, MySQL, PostgreSQL).
• Familiarity with Git or other version control systems.
• Excellent problem-solving skills and attention to detail.
• Experience with cloud platforms such as Azure or AWS.
• Provide IT support/assistance in after-sales services.

• Provide supervision services for all M&E works to ensure that contractors complies with contract/authorities'/agencies' requirements
• Oversee the M&E team and personnel
• Review all drawings and specifications and highlight any discrepancies, non-workable and/or missing details to OIC and the QP(D)s and QP(S)
• Review and comment on all construction method statements, risk assessmentsfor works, workplans, design for safety (DfS) workshop and SOP proposals
• Evaluate technically any claims submitted by main contractor and submit recommendation to the Superintending Officer
• Provide all relevant endorsements required by authorities/agencies/client
• Assist QPD for application of TOP and CSC
• Prepare site supervision plan and supervise all works directed by OIC
• Monitor project progress to ensure timely completion and prepare necessary site progress and status report for update to client
• Adhere to regulations and requirements of all stakeholders for any supervision work while ensuring proper supervision
• Report any accident/incident/near miss on site

Requirements

• Accredited with Resident Engineer certification under Joint Accreditation Committee of the Institution of Engineers Singapore
• Minimum 10 years of experience , of which at least 8 years in major construction works in buildings, services laying and testing and commissioning
• A Mechanical and Electrical Engineering degree recognised by the PEB of Singapore
• Conversant with statutory code and requirements for site supervision, quality control procedures, construction administration and submission of progress report
• Licensed electrical worker and licensed plumber are preferred

Brief Description & Role

This position is responsible for testing, troubleshooting, and repairing RF components and systems. You will work closely with cross functional teams to ensure the quality and performance of RF equipment, ensuring that all devices meet the required specifications and standards.

Responsibilities

1. Conduct comprehensive testing of RF devices, nodules, and systems to verify their performance, functionality and compliance with industry standards.
2. Ability to read and understand circuit schematics, layout and diagrams.
3. Able to perform RF tests, analyze test data and produce detailed reports outlining findings, and recommendation for improvements.
4. Maintain and operate various RF Test equipment like Spectrum Analysers, Vector Network Analyser (VNA), signal generators, noise figure measurement etc..
5. To perform failure analysis and debugging PCBs to component level.

Requirements

· Diploma /Bachelor in Electronics or Communication Engineering, or equivalence

· Preferably with at least 2 years of working experience in a product-based electronics manufacturing environment / product development.

Skills, Experiences & Knowledge

· Experience in automating test and measurements using bench test equipment.

· Knowledge of programming software in C, C#, Python or LabView.

· Experience with PCB design software

· Experience in antenna parameter measurement

· Preferably with soldering experience

· Excellent communication and documentation skills.

• Assist Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/ Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on site quality and safety issues.
• Determine any non-conformances on works
• Liaise with Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on site issues are conveyed to the Contractor within a reasonable time frame.
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggest quality improvement measures for implementation on site
• Supervise installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site by supervisor /client

Job Requirement

• Minimum Degree in Civil and Structural Engineering
• Minimum 5 years relevant experience in project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Required to have at least 2 years of viaduct and/or flyover construction experience

Job Description

The successful candidate will join the one of SIA Group's Cloud/DevOps teams and will be responsible for the following:

• Administering cloud-based Infrastructure deployment which includes tasks such as provisioning/de-provisioning of resources, maintaining security posture, user administration, monitoring computing resource utilization, network setup, backup/restore and incident management.
• Performs system administration activities in accordance with company policies and procedures.
• Troubleshoot, performs root cause analysis, implements corrective/preventive actions during and after an incident.
• Create and maintain documentation and processes for troubleshooting, maintaining, and configuring systems.
• Operates within assigned budget and demonstrates fiscal responsibility.
• Support audit and infrastructure/network security scans, disaster recovery and security related drills.
• Build automation wherever possible to improve development team’s agility.
• Implement Infrastructure-as-Code (IaC) on AWS, Azure or GCP.
• Provide training or conduct talks to the cloud community within the company.
• Explore, learn and deploy new technologies that will help the company to reduce cost or improve operational efficiencies.
• This position requires periodic system administration outside normal business hours.
• Note: You could be posted to any subsidiary in SIA Group.

Requirements

• Possess a degree in Information Technology or related fields.
• Minimum of 3 years of IT experience with at least 1 year of hands-on experience in AWS Cloud.
• AWS Certified Solution Architect (Associate) preferred.
• Conversant with infrastructure definition tools such as Cloud Formation and Terraform, and with YAML/JSON deployment templates.
• Advanced python/ansible scripting skills for provisioning and automating dynamic cloud infrastructure.
• Hands-on experience with Docker containerization and Kubernetes orchestration preferred.
• Strong analytical, project management, communications and interpersonal skills.
• Demonstrate strong knowledge in infrastructure areas such as virtual server technologies, networking, internet protocols, scripting & monitoring tools and IT Security.
• Experience in API Management (AWS API Gateway, Tibco Mashery), Platform as a Service (OpenShift, Cloud Foundry) and DevOps are preferred.

Job Description:

• Corporate with the construction manager to supervise and manage the site operation to align with the project goals.
• Work closely with subcontractors to ensure the progress of project are in time and coordinate the work resources required by subcontractors to meet project requirements.
• Corporate with goverment personnel to conduct on-site inspections.
• Participate in weekly or monthly meetings with subcontractors to discuss work progress and preparing monthly meeting progress reports.
• Participate in daily operation include planning, coordination and supervision of on-site activities.
• To ensure all aspects of the project align with engineering and design specifications, industry standards and construction regulations.
• Any other tasks assigned by the manager.

Requirements & Qualifications:

• Diploma/ Degree or above preferably from a recognized University accredited with PEB, Singapore
• Experience with public residential projects would be advantages.
• Proficient in Microsoft Office / Projects, AutoCAD
• Ability to keep a positive attitube in a fast-paced environment
• Good team player

Business Understanding At least (3) years of relevant experience in:
- Business Requirement Analysis
- Business Process and System Understanding
- Effective Communication with both business and technical users
Azure Data Engineering At least (2) years of hands-on experience as Azure Data Engineer using:
- Azure Data Factory
- Azure Synapse Analytics / Datawarehouse

Preferably with relevant certifications from Microsoft including Azure Data Engineer Associate;
Data Ingestion & Modelling At least (3) years of hands-on experience in
- Performing data Ingestion using Data factory & T-SQL stored procedure and data harmonizing
- Implementing Data Quality validation
- Good to have following skills
• Knowledge of Azure Databricks
• Data modelling in Azure Analysis Services using star and snowflake schema.
• Knowledge of writing DAX query to create measures & dimensions.
• Python Coding Experience
Others Conversant in Microsoft Office products

Fresh without experience-$2600 basic, after 3 months confirmation is $2700

Industry: Engineering

Located at Chai Chee

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Troubleshooting production problems and assisting in planning new project work.

Requirements

• Diploma in Engineering
• Able to write simple report

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Job Summary:

The ideal candidate will have extensive experience in designing, implementing, and maintaining complex broadcast and IT systems in a live television or broadcast environment.

Responsibilities:

• To assist and report to Audio & Comms Manager to ensure smooth running of daily engineering operations.
• To have the ability to solve problems with minimal instruction, independent and adaptable.
• To be flexible with work time, both in the office and overseas as required.
• Conferring with producers, talents, and others to determine and achieve the desired sound for a production.
• Setting up, testing and adjusting broadcast audio equipment and de-rig equipment after event completion.
• To be able to troubleshoot electronic equipment to a system level.
• Operate, maintain, and configure Communication Equipment/ Audio infrastructure from the ground up-Well versed in LAWO, RTS, RF equipment and AOIP
  Able to update software and equipment to the latest version from manufacturer.
  
• Assisting or reporting of Audio / Comms equipment problems and ensure the equipment is repaired on time for next production.
• To introduce, adopt and train team members on latest technologies.
• To be able to direct, instruct and manage assistant engineers and possible system integrators on projects.
• To have excellent oral and written communication skills including conversational English as well as computer skills.
• To be able to draft technical reports.
• To be able to read technical (Auto CAD) engineering drawings and willing to learn.
• Any other ad-hoc duties.

Requirements:

• Adaptability: showing flexibility, responding well to new challenges, is open to change
• Organization skills: ability to plan in advance with attention to details, ability to prioritize tasks when dealing with multiple deadlines, ability to remain calm and focused a dynamic environment, ability to be productive during periods of high workload and enable smooth project delivery
• Teamwork: ability to create and maintain positive working relationship and work well with other team members, and help to improve the team environment
• Communication: Listens well and is open to honest feedback, and able to communicate clearly and effectively
• Willingness to travel away from home regularly, sometimes for long periods.

Salary: Up $3000+OT

Industry: Engineering

Located at Chai Chee

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• Perform, document internal audits and other quality assurance activities to ensure readiness on international standards certification audits and GMP inspection.
• Create, review work instructions and standard operating procedures, devise sampling procedures and directions for recording and reporting quality data.
• Communicating with other team members to solve problems.
• Conduct / perform training to employees to improve GMP / international standards certification awareness and compliance.
• Other duties as and when assigned by management.

Requirements

• Diploma in Engineering
• Able to write simple report

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Job Responsibilities
∙Provide L2 technical support and advice to users on systems-related issues or queries
∙Perform administration/maintenance and works toward continuous optimization of systems performance related to Microsoft 365 & MDM product e.g. Intune, Jamf Pro / School
∙May need to be on standby with on-call availability with varied shifts including nights, weekends and holidays during critical cutover or L1 incident management
∙Provide technical support for multiple customer environments on End User Devices operations
∙Provide support for Windows / Apple / Android & Chromebook operating systems (OS), end- users software and applications
∙Develop and maintain technical documentation related to design, UAT, configuration, usage, troubleshooting, etc., for all Microsoft 365 & applications and services of MDM products
∙Work closely with Service Delivery Managers and Technical Managers to deliver operational service excellent to meet customer expectation
∙Provide support to project implementation and documentation.
∙Provide technical solution for project delivery and handle and resolve all technical aspects, with hands on approach
∙Work closely with Project Manager to deliver high quality project implementation
∙Develop and maintain PowerShell scripts used to manage / support the Microsoft 365 & Intune / Jamf environment
∙Any ad-hoc duties as assigned

Job Requirements:-
∙At least Diploma in any IT related courses
∙At least 3 - 5 years of IT experience. ICT experience in providing end user devices support / migration / implementation.
∙Fundamental knowledge of Microsoft 365 (Microsoft Teams, SharePoint online, Exchange Teams and Azure AD)
∙Familiarise with endpoint device management tools:
o On-prem - Active Directory environment Group Policies (GPOs) related to endpoint devices. Other e.g. SCCM, BitLocker, LAPS
o MDM products - Intune & Jamf Pro / School
∙Familiarise with endpoint devices operating system (OS). Windows 10/11, MacOS, iOS, Chromebook and Android
∙Candidates are required to handle clients professionally during all interfaces, and are customer oriented, and work effectively both independently and in a team environment
∙To have Microsoft 365 related certifications MD102, MS102, CompTIA A+, etc
∙To have Apple Device Support certification.
∙Technical accredited competency for: Major hardware system vendors (e.g Lenovo, HP & Dell)
∙Basic programming knowledge e.g. PowerShell and Visual basic scripting
∙Office Productivity tools for writing and presentation skills needs.
∙Knowledge of IT lifecycle management
∙Knowledge of ITSM - Incident Management, Problem Management, Change Management,
Asset Management, Patch Management

Job Responsibilities

∙Provide L2 technical support and advice to users on systems-related issues or queries

∙Perform administration/maintenance and works toward continuous optimization of systems performance related to Microsoft 365 & MDM product e.g Google Admin Centre , Lightspeed

∙May need to be on standby with oncall availability with varied shifts including nights, weekends and holidays during critical cutover or L1 incident management

∙Provide technical support for multiple customer environments on End User Devices operations

∙Provide support for Windows / Apple / Android & Chromebook operating systems (OS), end-users software and applications

∙Develop and maintain technical documentation related to design, UAT, configuration, usage,troubleshooting, etc., for all Microsoft 365 & applications and services of MDM products

∙Work closely with Service Delivery Managers and Technical Managers to deliver operational service excellent to meet customer expectation

∙Provide support to project implementation and documentation.

∙Provide technical solution for project delivery and handle and resolve all technical aspects, with hands on approach

∙Work closely with Project Manager to deliver high quality project implementation

∙Develop and maintain PowerShell scripts used to manage / support the Microsoft 365 & Intune / Jamf environment

∙Any ad-hoc duties as assigned

Job Requirements:-

∙At least Diploma in any IT related courses

∙At least 3 - 5 years of IT experience. ICT experience in providing end user devices support / migration / implementation.

∙Fundamental knowledge of Microsoft 365 (Microsoft Teams, SharePoint online, Exchange Teams and Azure AD)

∙Familiarise with endpoint device management tools:

o On prem - Active Directory environment Group Policies (GPOs) related to endpoint

devices. Other e.g. SCCM, BitLocker, LAPS

oMDM products – Google Admin Centre / Lightspeed / Blocksi

∙Familiarise with endpoint devices operating system (OS). Windows 10/11, MacOS, iOS,

Chromebook and Android

∙Candidates are required to handle clients professionally during all interfaces, and are customer oriented, and work effectively both independently and in a team environment

∙To have Microsoft 365 related certifications MD102, MS102, CompTIA A+, etc

∙To have Apple Device Support certification.

∙Technical accredited competency for: Major hardware system vendors (e.g Lenovo, HP &

Dell)

∙Basic programming knowledge e.g. PowerShell and Visual basic scripting

∙Office Productivity tools for writing and presentation skills needs.

∙Knowledge of IT lifecycle management

∙Knowledge of ITSM - Incident Management, Problem Management, Change Management,

Asset Management, Patch Management

Job Summary:

We are seeking a talented IT Engineer - MES who will be responsible for the integration of Computer Integrated Manufacturing (CIM) systems and Manufacturing Execution Systems (MES) focusing on improving efficiency and productivity to enhance manufacturing processes.

Mandatory Skill-set:

• Degree in Computer Science, Computer Engineering;
• At least 2 years of experience in supporting Manufacturing Execution System (MES) applications (e.g., Siemens Opcenter, Rockwell FactoryTalk);
• Proficiency in programming languages such as SQL, Python, or C#;
• Working knowledge in Unix scripting;
• Good understanding in application server, client application and database (i.e. Oracle);
• Independent and proactive yet a strong team player;
• Excellent spoken and written communication skills.

Desired Skill-set:

• Experience in Tibco (TIB / RV) in high technology manufacturing environment.

Responsibilities:

• Provide L2 and L3 support for production systems, focusing on monitoring, maintaining, and continuously improving the Manufacturing Execution System (MES);
• Ensure the proper operation of production lines concerning products, routes, operations, equipment, recipes, and lot movements;
• Analyze user requirements to perform MES modeling and configuration for changes in material flow;
• Participate in User Acceptance Testing (UAT) and System Integration Testing (SIT) to validate system performance and functionality;
• Offer both user and system support during pre-implementation and post-implementation phases to ensure a smooth transition and operation;
• Ensure that development tasks are completed on time, adhering to corporate policies and guidelines, with proper documentation;

Should you be interested in this career opportunity, please send in your updated resume to [email protected] at the earliest.

When you apply, you voluntarily consent to the disclosure, collection and use of your personal data for employment/recruitment and related purposes in accordance with the SCIENTE Group Privacy Policy, a copy of which is published at SCIENTE’s website (https://www.sciente.com/privacy-policy).

Confidentiality is assured, and only shortlisted candidates will be notified for interviews.

Location: East

Mon to Fri 8am to 5pm

Have AWS & bonus

Hands-on job

Job Requirement

1. Able to do PLC, HMI, programming with Mitsubishi and Omron brand.

2. Experience in handling Mitsubishi and Omron product servo motor products.

3. Understanding and being able to design automation electrical circuits.

4. Hard working and able to work hands on.

Requirements

• Diploma in Engineering
• At least 2 years experience

*Only shortlisted candidates will be notified*

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

ELECTRICAL DRAFTER ENGINEER

· Produce accurate 2D Auto CAD drawing according to project requirement.

· On-site or Off-site support to the project team to co-ordinate and follow through with main contractors/ client’s requirement and amendments

· Update drawings for submission and approval

· Single line Diagram, lighting, lighting protection, earthing & cable routing, equipment and switch room layout etc.

· Amend redraw plan/section base on client’s comments

· Perform other duties as assigned

REQUIREMENT

· Candidate must possess at least a Nitec / Higher Nitec / Diploma in Electrical Engineering or equivalent; or Certificate in AutoCAD Drafting

· At least 2 years of relevant experience in electrical drafting

· Able to work independently and diligently under stress and pressure

· Good communication skills, team player, meticulous, independent and self-motivated

· Engineering or equivalent; or Certificate in AutoCAD Drafting