• Responsible for all major mechanical and electrical and instrumentation equipment
• Lead a team of technical executives/technicians for troubleshooting works
• Manage the purchase of major supply and repair items alongside with supervision and execution of preventive and condition monitoring of major electrical equipment
• Handle hands-on preventive maintenance and breakdown maintenance work
• Coordination with clients and subcontractors to meet the site/project requirements
• Carry out rectification of faults within a specified time
• In-charge of troubleshooting of M&E system
• Responsible for planning, execution and supervision of all facilities management and operational activities
• Responsible for project cost control and service standards
• Any other ad hoc duties assigned

Job Requirements

• Degree or Diploma in Engineering.
• 3-5 years of relevant working experience
• Technical knowledge of M&E systems(including, but not limited to, fire protection systems, AV systems and ACMV systems) is an added advantage
• Able to perform shift work if required
• Preventive Maintenance Troubleshooting

ISCE2 is looking for a highly motivated candidate to join Advanced Characterization and Instrumentation (ACI) Division. This candidate will play an important role to contribute the following and ensure successful and sustainable operations for our ACI technical domains.

• Maintain quality management system and support material characterization requirements for technical domains "Chromatography and Mass Spectrometry" and "NMR, Physical and Thermal Characterization".
• Chromatography and Mass Spectrometry Domain - HPLC / LC-QTOF / LCMS-MS / CIC / GPC / ICP-OES / ICP-MS / GC / TD, PY, HS-GCMS / Gas sampling and analysis, etc.
• NMR, Physical and Thermal Characterization Domain - NMR, FTIR, UV, BET, SDT, TPDRO, EA, Rheometer, Tensile Testing, etc.
• Foster strong partnership and close collaborations with both internal R&D and external key industry stakeholders.
• Demonstrated competency in managing analytical instruments. This includes applying specialised knowledge to build deeper understanding for method development / validation and equipment calibration / troubleshooting / maintenance.
• Conduct analytical training for laboratory personnel, ensure appropriate competency before certifying them as authorised users.
• Strong focus and compliance with health, safety and environment requirements (laboratory safety, general housekeeping, chemical storage, waste disposal, etc).
• Good interpersonal and communication skills to interact with various project stakeholders, both internally and externally, through routine updates, written reports and/or meeting presentations.
• Participates in R&D project meetings to provide technical inputs as when required.
• Some knowledge in electronic laboratory information systems that connect with analytical data handling or workflow projects will be an advantage.
• Procurement duties – Laboratory supplies, equipment consumables and maintenance services.
• Minimum 3 years of experience.

Highlights:

• Comprehensive Medical Benefits (health insurance, dental)
• Transport Allowance
• AWS + Performance Bonus
• Birthday Incentive

Job Summary:

We are seeking a Senior / Security Systems Project Engineer, where you will manage and execute security projects, ensuring timely delivery, within budget, and with high-quality standards. You’ll act as the main client contact, overseeing project milestones and ensuring customer satisfaction throughout the process.

About the Company:

Our client is a trusted and leader provider of integrated security solutions, specializing in CCTV, card access, and alarm systems. With over 30 years of experience, the company offers innovative and reliable security services to residential, commercial, and government clients, focusing on creating safer environments through cutting-edge technology.

Responsibilities:

• Lead and manage security systems projects, ensuring alignment with project objectives and timelines.
• Collaborate with stakeholders to drive project milestones and meet strict deadlines.
• Act as the single point of contact for clients, ensuring satisfaction and managing escalations.
• Ensure projects deliver as-sold solutions, stay within the baseline budget, and are completed on time, all while meeting quality and client satisfaction criteria.
• Coordinate project team activities through effective task delegation, resource assignment, and program management.
• Maintain proper project documentation and ensure all required paperwork is completed accurately.
• Perform any additional tasks as assigned.

Requirements:

• Minimum Diploma in Electronics & Communication Engineering or a related field.
• Candidates with experience in the security systems industry will be highly preferred.
• Strong communicator with excellent coordination and interpersonal skills.
• Sensitive to deadlines with a strong ability to manage resources efficiently.
• Basic technical knowledge of ELV, Automation, Networking, and Security Systems (CCTV, Card Access, Alarm Systems) will be advantageous.
• Highly motivated individual with a proactive attitude and strong problem-solving capabilities.

How to Apply

Interested candidates, please submit your updated resume by using Apply button

**We regret to inform that only shortlisted candidates will be informed.**

Sarah Sevilla

Registration Number: R22107553

EA License No: 18C9027

Responsibilities:

• Develop and deploy machine learning models: Design, build, and optimize machine learning models and algorithms to solve specific business problems. Collaborate with cross-functional teams to gather requirements, define objectives, and deploy models into production environments.
• Model training and evaluation: Train and fine-tune machine learning models using appropriate algorithms and techniques. Evaluate model performance and identify areas for improvement, employing techniques such as cross-validation, hyperparameter optimization, and ensemble methods.
• Model deployment and integration: Collaborate with software engineers and DevOps teams to deploy machine learning models into production environments. Implement APIs and integrate models with existing systems and applications to enable real-time decision-making.
• Performance monitoring and maintenance: Monitor model performance and address any issues or anomalies that arise. Continuously improve models by refining algorithms, optimizing code, and incorporating feedback from users and stakeholders.
• Data analysis and insights: Perform exploratory data analysis, generate insights, and present findings to stakeholders. Use statistical methods and visualization techniques to communicate complex concepts and patterns effectively.
• Stay up-to-date with the latest advancements: Keep abreast of the latest research and trends in machine learning and artificial intelligence. Evaluate and recommend new tools, libraries, and methodologies to enhance the efficiency and effectiveness of the machine learning workflow.

Requirements:

• Education: Bachelor's or Master's degree in Computer Science, Data Science, Machine Learning, or a related field. An equivalent combination of education and experience will also be considered.
• Experience: At least 2 years’ experience working in a similar role. Hands-on experience in designing, developing, and deploying machine learning models in real-world applications.
• Solid understanding of machine learning algorithms, techniques, and libraries (e.g., TensorFlow, PyTorch, scikit-learn).
• Experience with working on Large Language Models and Generative AI technology is a plus.

Technical skills:

1. Strong programming skills in languages such as Python.
2. Proficiency in machine learning frameworks such as TensorFlow, PyTorch, or Scikit-Learn etc.
3. Solid understanding of Statistical Analysis, Probability Theory, and Hypothesis Testing.
4. Familiarity with machine learning tools on cloud platforms (e.g., AWS, Azure, GCP) and distributed computing frameworks (e.g., Spark) is a plus.
5. Problem-solving and analytical mindset: Ability to analyze complex problems, break them down into solvable components, and develop innovative machine learning solutions. Strong mathematical and analytical skills are essential.
6. Communication and collaboration: Excellent verbal and written communication skills, with the ability to convey technical concepts to both technical and non-technical stakeholders. Proven ability to work collaboratively in a team environment and effectively manage multiple priorities.
7. Adaptability and continuous learning: Willingness to adapt to evolving technologies and learn new tools and techniques. Demonstrated commitment to staying updated with the latest advancements in machine learning and artificial intelligence.

Only shortlisted candidates will be notified.

Please email a copy of your detailed resume to [email protected] for immediate processing.

(EA Reg No: 20C0312)

Design Team Leader/Senior Facade Designer

Need Engineering Jobs?

Visit https://ourengineers.com

Job Responsibilities:

• Lead and oversee the Design Team in executing facade design works.
• Plan and organize design tasks to meet construction schedule.
• Provide guidance and allocate work to team members, ensuring quality and productivity.
• Ensure that design deliverables, drawings, and other outputs meet required standards and specifications.
• Identify and communicate any additional work or variations to the Project Manager/Contract Manager for approval.
• Coordinate with Consultants, Main Contractor, and other parties involved in the project.
• Assist the site team in resolving site clashes and interface issues.
• Participate in workshops and lead the review and comment process for shop drawings, ensuring constructability and design quality.
• Manage the design change process, minimizing impact on project schedule and cost.
• Resolve unforeseen interface problems during different design phases.

Job Requirements:

• Essential skills: design development, design management.
• Advantageous knowledge and skills in Revit and Rhino; ability to read and extract information from 3D models in these formats.
• Excellent communication and interpersonal skills.
• Strong organizational, coordination, and leadership abilities.
• Minimum of 5 years of experience in facade design.

Need Engineering Jobs?

Visit https://ourengineers.com

The information included in a network engineer job description usually contains a list of specific duties and responsibilities and mentions the required qualifications and skills for the role. Employers typically post their preferences and requirements in the job description to help attract matching and suitable candidates. This incentivises candidates to prepare their applications accordingly to showcase their potential fit, which can result in a more efficient hiring process. The job description may also indicate details about the work environment such as the nature of the business and the type of data you can work with.Depending on the employer's requirements, network engineers may be stationed at an office or travel to work sites to provide support when necessary. A network engineer typically designs, installs, configures and maintains computer networks. They also troubleshoot any issues and ensure that the network is secure and efficient. Network engineers frequently collaborate with other information technology (IT) team members to develop network policies and stay up-to-date with emerging technologies to ensure the network remains secure and scalable.

Our Client:

• Engineering Industry
• Central Region
• 5 Days, Monday to Friday
• Up to $8,000 per month

Responsibilities:

• Design and build data pipelines infrastructure to collect, process and store data from various sources.
• Develop data assets platform to provide a centralized repository for managing and accessing data assets.
• Implement automated SQL queries based on user-defined criteria or business requirements.
• Use techniques like query templates, metadata-driven generation, or machine learning algorithms to generate SQL queries.
• Create new IPs in Singapore in area of expertise.
• Manage collaboration projects with Institute of Higher Learning or Research Institutes on new technology development.

Requirements:

• Degree / Masters / PhD in Computer Science, Data Science, Statistics Applied Sciences or related field.
• Proficiency in Python, SQL, Java or Scala programming languages.
• Understand data warehousing concepts, ETL (Extract, Transform, Load) processes and tools like Informatica, Talend, or Airflow.
• Knowledge of relational databases (MySQL, PostgreSQL, Oracle) and NoSQL databases (MongoDB, Cassandra).
• Familiar with Apache Airflow, Kubernetes or Ansible for automating data pipelines and infrastructure.

For interested applicants, please click "Quick Apply”

We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Quay Choon Lan Joanne (Guo Chunlan) | EA Reg No: R24121479
JTE Recruit Pte Ltd | EA Lic No: 14C7215

whatsapp: 85986715

Position: Furniture Design Partner

Pass: singaporean, PR or LTVP

Salary: $1000-$10000

None during working hours

Requirements: Relevant experience in furniture design

Location: 211 Henderson Rd

Jie Shun Jia | EA License No.: 24C2410 | EA Registration No.: R24124440 (FENG YINGJIE)

Our Client:

• Cranes Lifting Industry
• 5 Days, Office Hours
• West Region
• Up to $4300 Per Month

Responsibilities:

• Investigate all incidents and product nonconformity to identify causes and ways to prevent occurrence in future.
• Support and promote the company incident report and management system.
• Provide guidance to business on consistency of HSE and QMS expertise by participating in Management reviews and audits.
• Monitor company’s ISO 9001 Management System are implemented and maintained in Singapore and Malaysia.
• Control of system documentations and procedures for Southeast Asia including Australia.
• Coordinate with business on training and holding of dialogue sessions with relevant customers, contractors, suppliers to ensure awareness and compliance with all HSE requirement impacting company operations.
• Ensure quality procedures are adhered throughout organisation and highlight noncompliance.
• Conduct quality check and inspection on manufacturing and installation processes pertaining to current range of products.
• Recommend quality control and inspection requirements in consultation with regional HSE and QMS whenever necessary for final review and approval by region director for implementation.
• Participate in HSE committee meetings and implement HSE procedures and standards in all workplace activities to achieve the required safety standard.
• Chair monthly QIP meeting and submit monthly quality report.

Requirements:

• Qualification in Engineering, Safety or Quality.
• Minimum 2 years of working experience in QA/QC in a manufacturing or construction environment.

For interested applicants, please click "Quick Apply”

We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Quay Choon Lan Joanne (Guo Chunlan) | EA Reg No: R24121479
JTE Recruit Pte Ltd | EA Lic No: 14C7215

Manufacturing Company is looking for Assistant Engineer

Skills:

• Knowledge and hand on experience in Siemens PLC programming (e.g., S7-1200, S7-1500, TIA Portal).
• Knowledge of automation systems and industrial control systems.
• Experience with HMI, SCADA, and related technologies.
• Basic understanding of electrical and instrumentation systems.
• Problem-solving skills and ability to work in a team.

Working hours:

• 12 hours rotating shift

Location:

• Woodland

Benefits:

Daily allowance

OT pay

Quarterly bonus

13 mth AWS

Variable bonus

Interested candidates please email your CV to [email protected] or whatsapp to 97554222

XIN WEI

CEI Reg: R23118455

RECRUITMENT MANAGER

Contact: 97554222

Link2 Manpower Pte Ltd

MOM Reg No. 22C1131

Office Mainline: 97704222

Website: www.link2.com.sg

We are seeking a highly motivated and experienced Construction Site Engineer to join our team.

The successful candidate will play a crucial role in overseeing all aspects of construction projects, ensuring they are completed on time, within budget, and to the highest safety and quality standards.

Responsibilities:

-Oversee daily site operations, ensuring adherence to project plans, specifications, and safety regulations.

-Manage and supervise site personnel, including subcontractors and direct workers.

-Liaise with subcon to plan, arrange and execute construction activities.

-Liaise with design department to confirm and clarify design issues.

-Ensure quality of work done conform to specifications.

-Able to coordinate well with MEP department

-Prepare and maintain detailed site records, including progress reports, material tracking, and quality control documentation.

-Adhere to safety protocols on site, conducting regular safety inspections.

-Liaise with RE, RTOs and other stakeholders to ensure smooth project execution.

-Resolve site-related issues and conflicts effectively and efficiently.

-Manage and coordinate the procurement and delivery of construction materials.

-Prepare and submit progress reports.

-Ensure compliance with all relevant Singaporean building codes and regulations.

-Contribute to the continuous improvement of site processes and efficiency.

-Able to handle any other ad-hoc duties and tasks assigned by superior and management

Qualifications:

- Min Diploma in Civil/ Structural Engineering or equivalent

- Minimum 3 years of experience as a Site Engineer in Singapore's construction industry.

- Strong understanding of construction methodologies, materials, and equipment.

- Proficiency in reading and interpreting construction drawings and specifications.

- Good knowledge of Singaporean building codes and regulations.

- Proven ability to manage budgets, schedules, and resources effectively.

- Strong leadership, communication, and interpersonal skills.

- Ability to work independently and as part of a team.

- Proficient in Microsoft Office Suite and CAD

Location : Tampines

Responsibilities :

• Attending sites survey, precon survey, site inspection and handover
• Handling Contractor, assigning sites to subcons
• Draft technical proposal
• Liaise with other authorities such as HDB, LTA, Building Owner for Private sites
• Material & equipment acquisition, project coordination, progress monitoring, site technical support and as-built preparation and submission.
• Site handover with Client
• Coordinate with subcon and customer for site installation work.
• Follow up with contractors and update the status to client and Project Manager
• Attending site meeting and survey with Building Owner.

Requirements :

• Diploma / Bachelor’s Degree in Telecommunication or equivalent
• Preferred 2 years experience in telecommunication field
• Good communication skills, able to interact with people of all levels
• 5.5 days work week
• Woodland area

Employment Type: 6-12 months contract with the potential for permanent conversion

Job Responsibilities:

• Lead the setup and commissioning of test processes and machinery for new devices, ensuring equipment is fully operational and meets testing requirements.
• Optimize and maintain testing machines during the engineering phase to ensure efficient and accurate test execution.
• Analyze test results and perform post-build activities such as failure analysis and corrective actions (FACA) to address yield loss and improve processes.
• Collaborate with external vendors and internal teams to develop and deliver testing solutions for new optical modules during the engineering phase, particularly for small-scale production.
• Provide technical support in the development and refinement of test procedures, continuously improving testing methodologies and equipment.
• Ensure regular maintenance, calibration, and repair schedules are followed to maintain high performance and minimal downtime of test equipment.
• Generate clear and concise reports on test results, findings, and recommendations for process improvement.

Job Requirements:

• 3+ years of experience in a Test Engineer role or a similar position, with a focus on optical modules or related technologies.
• Bachelor’s or Master’s degree in Engineering, Physics, Materials Science, or a related field.
• Hands-on experience in functionality testing of optical devices, such as cameras, projectors, range finders, flashlights, and proximity sensors.
• Proven ability to operate, maintain, and troubleshoot test machines, with experience in tooling and configuring machines for new device testing.
• Familiarity with automated test equipment (ATE) and test software, including the ability to develop and refine testing processes.
• Proficiency in analyzing test data, conducting failure analysis, and applying corrective actions to improve yield and product quality.
• Strong understanding of statistical analysis tools and techniques for data interpretation.
• Knowledge of FMEA (Failure Modes and Effects Analysis) and root cause analysis methodologies.
• Excellent written and verbal communication skills, with the ability to work effectively with cross-functional teams.

- Requires a candidate that can perform a cross-platform experience in systems administration, including analyzing, designing, installing, maintaining, and repairing hardware, software, peripherals, and networks.

- Superior troubleshooting and technical support abilities with migrations, network connectivity, and security and database applications.

- Develop exceptional relationships with co-workers, management and end users.

- Requires onsite troubleshooting and management.

-Requires to perform labour work when necessary to ensure safety and efficacy of work rendered by peers.

- Committed to finding innovative solutions to a variety of IT problems, such as security, database management, software programming and technical troubleshooting.

- Knowledge in executing sales pitch and digital marketing experience will be advantageous.

- Driving licence of minimum class 3 will be advantageous.

- Shift working hours

- A minimum of Bachelor's Degree in IT/ Electrical Engineering/ Computer Engineering

- Other Engineering qualifications will be assessed before consideration

• Minimum 5 years of administration experience of Storage Arrays of multiple vendors like EMC, Hitachi and Netapp
• Administration experience of Different Cloud platforms like AWS and Azure.
• Hitachi midrange and enterprise storage (AMS, HUS, VSP & Gx00 etc)
• Experience on AWS Cloud Specific technologies like EC2, S3, Route53, Cloud Formation, Elastic IPs, VPC, RDS and Cloud Watch.
• Configuring Elastic Load Balancers with EC2 Auto Scaling groups.
• Optimized Volumes and EC2 Instances and created multi AZ VPC Instances
• Good Understanding of AWS Elastic Block storage(EBS), various volume types and Utilization of different types of EBS Volumes based on client requirement.
• Storage performance tuning and troubleshooting.
• Incident management and change management process knowledge.
• Project handling experience from sizing to roll-out, preferably with project management background
• Strong analytical skill, very initiative, good planning & systematic execution

Jewellery Designer

Location: Paragon
Working Days: 5-day (rotating shift)
Working Hours: 10.45am – 9pm
Salary: $2,400- $3,300

Job Description:

The Role:

We are looking for an in-house jewellery designer. You will be working directly with the customers and to create bespoke designs. This role is multi-faceted and you would be also operating as a sales executive when clients are in the boutique. When you are with clients, you are expected to provide them with product knowledge and effectively sell both the brand and product. You will be required to share brand history, product knowledge and the highest level of customer service with all potential customers. As a designer, you need to be able to discuss a range of design options and formulate creative original ideas. You would be required to sketch out ideas and designs, sometime using computer-aided design (CAD), to help the client visualize the final design.

Skills:

• Formal training in Jewellery Design
• Drawing and computer design skills to produce designs
• Work with deadlines
• Commercial awareness and practical knowledge when designing

Requirements:

• Advanced skills in PhotoShop, Illustrator
• Able to commit to retail hours including weekends and public holidays

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

You will play a crucial role in overseeing the deployment, installation, testing and maintenance and technical support of healthcare technology solutions at hospitals, nursing homes and residential apartments.

- Work with stakeholders to prepare documentation and approvals for deployment works

- Perform routine maintenance, diagnosis and troubleshooting of technical issues related to systems

- Physical installation, repair of technology solutions

- Maintain records for projects

- Provide technical support to users. There will be occasional need to respond to system issues beyond working hours on a 24/7 basis.

Some familiarity in installation and system maintenance works, programming and electronic devices will be beneficial. In-house training will be provided.

• Minimum 5 years of experience in data engineering, with expertise in AWS or Azure services, Databricks, and/or Informatica IDMC.
• Extensive experience with Informatica PowerCenter (CDI-PC) and IDMC
• Strong understanding of data integration concepts, ETL process and data quality management.
• Proficiency in designing and implementing data mappings, transformations, and workflows.
• Evaluate potential technical solutions and make recommendations to resolve data issues especially on
• performance assessment for complex data transformations and long running data processes.
• Strong knowledge of SQL and NoSQL databases.
• Excellent problem-solving and analytical skills.
• Strong communication and collaboration skills.
• Team management skills.
• Databricks certifications, and Informatica certifications are a plus

Our Client:

• Engineering Industry
• Central Region
• 5 Days, Monday to Friday
• Up to $8,000 per month

Responsibilities:

• Design and build data pipelines infrastructure to collect, process and store data from various sources.
• Develop data assets platform to provide a centralized repository for managing and accessing data assets.
• Implement automated SQL queries based on user-defined criteria or business requirements.
• Use techniques like query templates, metadata-driven generation, or machine learning algorithms to generate SQL queries.
• Create new IPs in Singapore in area of expertise.
• Manage collaboration projects with Institute of Higher Learning or Research Institutes on new technology development.

Requirements:

• Degree / Masters / PhD in Computer Science, Data Science, Statistics Applied Sciences or related field.
• Proficiency in Python, SQL, Java or Scala programming languages.
• Understand data warehousing concepts, ETL (Extract, Transform, Load) processes and tools like Informatica, Talend, or Airflow.
• Knowledge of relational databases (MySQL, PostgreSQL, Oracle) and NoSQL databases (MongoDB, Cassandra).
• Familiar with Apache Airflow, Kubernetes or Ansible for automating data pipelines and infrastructure.

For interested applicants, please click "Quick Apply”

We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Quay Choon Lan Joanne (Guo Chunlan) | EA Reg No: R24121479
JTE Recruit Pte Ltd | EA Lic No: 14C7215

The ideal candidate will be responsible for designing, developing, testing, and debugging responsive web and mobile applications for the company. Using JavaScript, HTML, and CSS, this candidate will be able to translate user and business needs into functional frontend design.

Responsibilities

· Designing, developing, and testing UI for mobile and web applications

· Build reusable code and libraries for future use

· Accurately translate user and business needs into functional frontend code

Qualifications

· 7 years of software engineering experience primarily leveraging ReactJS.

· Strong engineering and technical background with demonstrable enterprise development experience using ReactJS and RESTful APIs.

· Deep understanding of JavaScript/Typescript, HTML5 and CSS.

· Experience using Redux, Web Workers and PWAs.

· Experience with continuous integration and build (CI/CD) process & tools.

· Proven ability to quickly understand functional requirements and technical concepts.

· Experience with TDD and familiarity with testing frameworks, ideally Cypress, Selenium and PACT.

· Exposure to mobile development via React Native an advantage.

· GitHub portfolio an advantage.

We are seeking a dedicated Support Engineer professional to join our team to ensure the smooth operation of our systems and applications. The ideal candidate will have strong technical skills and be able to collaborate with various departments to support and maintain our software systems.

Responsibilities:

Monitor and troubleshoot production issues (Linux VMs, Vendor Product, SFTP).

Collaborate with cross-functional teams to identify and resolve production issues.

Perform root cause analysis and provide solutions to prevent future issues.

Create and maintain documentation related to production issues and resolutions via JIRA.

Implement and maintain processes and procedures to improve production support.

Provide daily, weekly, and monthly reports on system performance and issue status.

Ensure proper deployment and release of software updates & infrastructure patches/upgrades.

Participate in on-call rotation and respond to production issues after business hours. There are two shifts, Morning (7 AM to 4 PM) and Afternoon (2 PM to 11 PM), running 7 days a week.

Deployments during silent hours.

Development work within the vendor product (about 10%-20% of time).

Preferred Qualifications:

Bachelor’s degree in Computer Science or related field.

2–4 years of experience in Production Support or related role.

Strong technical skills in Java, SQL, UNIX, and scripting languages.

Ability to troubleshoot and resolve complex production issues efficiently.

Excellent problem-solving and analytical skills.

Effective communication skills to collaborate with cross-functional teams effectively.

Willingness to participate in on-call rotation.

The Site Engineer (Civil) is responsible for assisting the PM on the progress of site works and manpower related aspects of the project. He/She will be required to:

• Monitor and review master construction program and preparation of catch-up program, if applicable.
• Monitor and supervise Workheads/Foremen, ensure compliance to the quality procedures & standard of workmanship. Checking on quality and quantity of work by subcontractors.
• Preparation of detailed program for the site team to follow accordingly & completed in time.
• Resolve drawing discrepancies & technical diculties.
• Preparation of detailed method statements and work instructions for construction.
• Coordinates between sub-contractors/vendors/internal departments and monitor site manpower / material / equipment demands to meet schedules.
• Liaise with the Consultants on the submission related to structural works.
• Plan all works on site, including program schedules and construction methods, forecast equipment, material and manpower requirement, and control usage and wastages of all.
• Adherence to safety practices in the work place.

We are seeking an experienced Middleware Engineer to join our team. The successful candidate will be responsible for administering, supporting, and maintaining middleware products, including but not limited to IBM WebSphere, Oracle WebLogic, JBOSS EAP, IBM HTTP servers, Oracle HTTP servers, and IBM WebSphere MQ (WMQ). This role requires a strong technical background, excellent problem-solving skills, and the ability to work both independently and collaboratively in a dynamic environment.

Key Responsibilities:

• Administer, support, and maintain middleware products (IBM WebSphere, Oracle WebLogic, JBOSS EAP, IBM HTTP servers, Oracle HTTP servers, IBM WMQ).
• Install, configure, and maintain JBOSS EAP, IBM WebSphere Application Server (WAS), Oracle WebLogic, and IBM WebSphere MQ (WMQ).
• Assess system needs, identify appropriate changes, and make recommendations for improvements.
• Perform middleware system administration tasks, including troubleshooting, monitoring, problem resolution, system security, and change implementation.
• Plan, prepare, and apply maintenance fixes and upgrades for JBOSS EAP, WMQ/WAS, and other middleware platforms.
• Assist with high-level debugging, including heap and thread dump analysis, to support application teams.
• Provide detailed documentation for middleware installations, configurations, and administrative processes.
• Work individually or as part of a team on system projects related to UNIX, Linux, Windows, and application support.
• Provide on-call support for middleware systems as required.

Experience Required:

• 6+ years of experience managing middleware platforms, including IBM WebSphere Message Queuing, Application Server, JBOSS EAP, and Oracle WebLogic.
• Strong UNIX/Linux operating system administration experience.
• Deployment and administration of JBOSS EAP in enterprise environments.
• Experience deploying clustered, highly available middleware platforms.
• Familiarity with database integration is a plus.
• Experience with scripting languages to automate tasks is an advantage.

To apply, simply click the "Apply" button or send your updated profile to [email protected]

EA Licence No.:18S9405 / EA Reg. No.:R1330864

Percept Solutions is expanding and actively seeking talented individuals. We encourage applicants to follow Percept Solutions on LinkedIn at https://www.linkedin.com/company/percept-solutions/to stay informed about new opportunities and events.

COTS Engineer

Responsibilities:

• Assist Business Analysts (BA) in the elaboration of user stories.
• Collaborate with Quality Assurance (QA) to develop test automation scripts and address bug fixes.
• Support DevOps in the automation of build and release processes.
• Design and deliver functional software applications that exceed customer expectations.
• Enhance software quality by employing XP (Extreme Programming) practices such as code review and unit testing.
• Adhere to the Software Craftsmanship Manifesto.
• Prepare architectural and other technical documents.

Experience and Skills Needed:

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology, or related disciplines.
• Familiarity with Git.
• Experience with Continuous Integration.
• Experience in working with agile teams, including Test-Driven Development (TDD), Pair programming, and Scrum.
• Proficiency with both Windows and UNIX/Linux servers.
• Knowledge of Design Patterns.
• Familiarity with Unit Testing.
• Strong presentation and listening skills.
• Exposure to mobile application development is a plus.
• Working experience in Agile and UX development environments is advantageous.
• Proficiency with business process modeling techniques and BPMN (Business Process Model and Notation) is a plus.
• Experience in the development of internet and intranet applications is beneficial.
• Hands-on configuration experience in administering and managing COTS (Commercial Off-The-Shelf) products and features, including but not limited to rules engine, workflow, process logic, data validations, screen flows, and page layouts with products like Salesforce, ServiceNow, Sharepoint Online, Dynamics 365, etc., is advantageous.
• Experience with designing custom objects, fields, functions, layouts, processes, or validation rules is an asset.

Job Description

• Responsible for Equipment Uptime, Productivity

• Work in a cleanroom environment for long hours

• In-charge of PM planning, Equipment Maintenan

Management.

• Co-work with Engineer to resolve equipment/line

• To improve and enhance machine performance a

machine capability.

• Perform any other duties as assigned.

Job Requirements

• Diploma/Higher Nitec/Nitec in Engineering (Elect

Mechanical), or equivalent.

• Proficiency in Microsoft Office.

• Ability to work independently as well as in a team

• Shift work required.

• At least 2 years of relevant working experience inenvironment.